1. Headset overview NOTE: All accessories are also available on avantree.com 2. Connect 2.1 Connect with mobile phone STEP 1 Turn Sacool Pro off (press and hold MFB button for 4s).The LED indicator flashes red and you will hear “power off”. STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately and you will hear “Paring”. STEP 3 Activate Bluetooth on your phone and select “Avantree Sacool Pro”. 2.2 Connect with PC/notebook STEP 1 Turn Sacool Pro off (press and hold MFB button for 4s). The LED indicator flashes red and you will hear “power off”. STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately. STEP 3 Activate Bluetooth on your PC/notebook and select “Avantree Sacool Pro”. NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you may need a Bluetooth audio adapter to add the feature on PC/notebook that does not support A2DP. For details on how to set up with PC/notebook, please see support.avantree.com 2.3 Connect with two mobile phones simultaneously STEP 1 Connect headset with the first phone as above. Then Turn off Bluetooth of the first phone. STEP 2 Connect headset with the second phone as above. Then turn off the headset. STEP 3 Turn on Bluetooth of the first phone. Then Turn on the headset. STEP 4 It will automatically connect with the second phone, after that please tap from the first phone to manually connect it. 3. How to wear the Sacool Pro STEP 1 Hold the headset as shown, with the button side in your left hand. STEP 2 Put the earbuds in your ears, with the cord over the ears and to back of your head. STEP 3 Adjust position of earbuds in your ears for maximum comfort. STEP 4 Adjust length of cable using the silicone piece to make the headset secure. NOTE: Make sure your phone is in an armband / pocket / handbag on the left of your body. Otherwise, disconnection might be caused by your body blocking the Bluetooth signal. 4. How to use MFB On/Off Press and hold MFB 4s MFB Answer a call Press MFB once MFB End a call Press MFB once MFB Reject a call Double click MFB MFB Redial last number Double click MFB “V+” and “V-” Voice Dial / Command Short press “V+” and “V-” MFB Play music Press MFB once MFB Pause music Press MFB once V+ Volume up Press “V+” once V- Volume down Press “V-” once V+ Next track Press and hold “V+” V- Previous track Press and hold “V-” 5. How to charge When the LED blinks red, you should recharge your headphones. Please remove the micro-USB protector and charge the headset via the supplied USB to AC adapter or PC USB port. It normally takes about 2 hours to fully charge the battery. The LED will stay red when charging and will turn off when charging is complete. NOTE: AC adapter requirement 5V / 500mA-1A. 6. Product specifications Bluetooth version: 4.0 with EDR Support profiles: Headset, Handsfree, A2DP, AVRCP Operational range: Class 2, 10 metres Battery: rechargeable lithium battery Talk time: up to 8.5 hrs Music time: up to 8 hrs Standby time: up to 80 hrs Headset weight: 18g Headset size: 36.2mm(L)x21.2mm(H)X29.7mm(W) NOTE: The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependant on different usage styles, settings and operating environment.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project