954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002

954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Perko Heavy Duty Battery Selector Switch
• For use with two or more batteries and single or dual engine systems.
• Permits selection between batteries for starting and charging, or operation of both
batteries in parallel.
Perko Battery Selector Switch
• For use in systems under 50 volts.
For use with two or more batteries and single or dual engine systems.
• Permits selection between batteries for starting and charging, or operation of both • Rated for 380 amps continuous, 850 amps intermittent
(15 seconds on, 5 minutes off.)
batteries in parallel.
• For dual engines two switches are required.
• For use in systems under 50 volts.
• Rated for 250 amps continuous, 360 amps intermittent.
• For dual engines where two switches are required.
Order No
Mfg No
Type
List
700069
8501/DP
Standard
$55.08
Battery Switches
Electrical
8501
Order No
Mfg No
List
340995
8603/DP
$229.78
Perko Heavy Duty Battery Disconnect Switch with Alternator Field Disconnect
• For use 6, 12, 24 and 32 volt marine electrical systems.
• Capacity - rated 450 Amps continuous, 1200 Amps intermittent (15 seconds on, 5
minutes off).
• For use in systems under 50 volts.
Dimensions” 5-1/4” square; depth 3-3/8”.
Perko Main Battery Switch
• Ignition protected.
• Surface mounted in red plastic housing with large, black plastic knobs.
• Main disconnect “ON/OFF” switch.
• For use with systems under 50 volts.
• Rated for 250 amps continuous, 360 amps intermittent.
• 5-1/4” diameter x 2-5/8”
Order No
Mfg No
List
703473
9601DP
$68.98
Order No
Mfg No
List
341006
9703/DP
$218.68
Blue Sea Systems Shore Power / Generator Selector Switch
• Switches 2 - 120 or 230 Volt AC sources.
• Compact solution when circuit protection is provided elsewhere.
• Allows connecting one of two different AC sources to one circuit.
• Mounts in panels up to 0.16” (4.00mm) thick.
• Heavy duty industrial rated switch.
• Intuitive function - One hand operation.
• UL listed.
• Switches 120 or 230 Volt AC sources.
• 600 Volt AC max.
• Compact solution when circuit protection is provided elsewhere.
8503
• Allows connecting one of several AC sources to one circuit.
• Mounts in panels up to 0.16” (4.00mm) thick.
With Alternator Field Disconnect
• Heavy duty industral rated switch.
Alternator Field Disconnect will interrupt the field current (reducing the possibility of • Intuitive function - one hand operation.
damage) if turned “OFF” with the engine running.
Order No
Mfg No
Amp Rating
Positions
Order No
Mfg No
List
386330
9009
30A
2 + Off
340984
118
8503/DP
$86.23
386341
9019
Prices and specifications subject to change without notice.
65A
2 + Off
List
$119.99
$339.99
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Order No
Mfg No
List
385769
7610
$109.97
6006
Mfg No
List
385747
9003e
$46.61
Blue Sea Systems e-Series Battery Switch Selector with AFD
• Switches isolated battery banks to all loads or combines battery banks to all
loads.
• Includes AFD (Alternator Field Disconnect).
• Make-before-break contact design allows switching between battery banks without
power interruption.
• Ignition protected—safe for installation aboard gasoline powered boats.
• Case design allows surface or rear panel mounting.
• 4 Position Selector
• Maximum Voltage: 32V DC
• Continuous Rating: 350A
• Intermittent Rating: 600A
6011
Blue Sea m-Series (Mini) Battery Switches
• Ignition protected - case design allows surface, front panel,
or rear panel mounting.
• Isolating cover with snap-on sections protects rear contacts
• Inrush Rating: 0.25 sec (10 repeats): 1500 Amps
• DC Cranking Rating: 9.75 sec (10 repeats): 700 Amps
• DC Intermittent Rating: 5 min (UL 1107) 500 Amps
• DC Continuous Rating: (UL 1107) 300 Amps
• DC Maximum Voltage Rating 48 Volts DC
Order No
Order No
Mfg No
Description
Type
List
385714
6005
Single Circuit ON/OFF Battery
Switch
With Key
$31.95
385725
6006
Single Circuit ON/OFF Battery
Switch
With Knob
$31.95
386105
6011
Dual Circuit Plus™ Battery Switch
With Knob
$53.24
Order No
Mfg No
Description
List
386138
9002e
4 Position Selector with Alernator Field
Disconnect
$55.09
3000
3002
Blue Sea Systems
HD-Series Battery Switch
Blue Sea Systems e-Series Battery Switch Selector
• Meets American Boat and Yacht Council (ABYC) requirements for battery switch• Make-before-break contact design allows switching between battery banks without
es.
power interruption.
• Ignition protected - safe for installation aboard gasoline powered boats.
• Ignition protected - Safe for installation aboard gasoline powered boats.
• Case design allows surface or rear panel mounting.
• Case design allows surface or rear panel mounting.
• Accepts two 4/0 AWG (95mm²) battery cables.
• Meets American Boat and Yacht Council requirements for battery switches.
Order No Mfg No
Type
Amp Rating
List
• Cranking amps rating: 900
• Continuous amps rating: 350
Single Circuit Intermittent: 900A; Continuous:
386116
3000
$102.63
• Maximum volts: 48 DC
On/Off
600A
Order No
Mfg No
Description
List
Selector-4
Intermittent: 700A; Continuous:
386127
3002
$106.86
385736
9001e
4 Position Selector
$49.79
Pos.
500A
Prices and specifications subject to change without notice.
119
Battery Switches
6005
e-Series Battery Switch Single Circuit ON/OFF
• Ignition protected - Safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting
• Meets American Boat and Yacht Council (ABYC) requirements for battery switches.
• Cranking amps max: 900
• Continuous amps max: 350
• Maximum voltage: 48 VDC
Electrical
Blue Sea Systems e-Series Battery Switch Dual Circuit
Plus™
• Allows temporary isolation of house loads from engine
circuits during engine cranking to protect sensitive electronics
• Automatically combines battery banks during the charging
cycle and isolates under discharge
• 12/24 Volt auto ranging voltage input
• Waterproof · Ignition protected.
• Remote LED indicates various functions
• Supports high-output alternators up to 120 Amperes
• Activates from any charging source - alternators, battery chargers, or solar panels
Continuous Rating: 120 Amperes DC
Intermittent Rating: 210 Amperes DC
Terminal Stud Size 3/8”-16 (accepts M10 ring terminal)
Maximum Cable Size 1/0 AWG
Agency Standards: ISO 8846 / Meets SAE J1171 external ignition protection requirements Width: 3.886”; Height: 3.502”
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Mini Add-A-Battery Kit - 65A
• Don’t get stranded – Add a Battery! Adding a second battery to the electrical system prevents
the unintended discharge of the engine start battery.
• Primarily designed for outboard powered boats with alternator output of 65A or less.
• When installed, the Mini Add-A-Battery isolates the
start battery from the house loads which prevents the
discharge of the start battery. The Mini Add-A-Battery
offers a simple way to control the charging and battery switching of two battery
banks. The M-Series Dual Circuit Plus™ Battery Switch simplifies the switching
while the M-ACR automates charging between two batteries.
Mfg No
List
386680
7649
$119.47
Battery Switches
Electrical
Order No
Guest Battery Selector Switch
• Single-pole, triple throw switch permits selection between two batteries, operation
of both batteries in parallel, or complete disconnect of both batteries.
• Rated at 230 amps continuous or 345 amps momentary.
• 5-1/2” diameter, 2-5/8” high.
• Three mounting holes on 4-1/8” centers.
• Available with or without alternator field disconnect.
Order No
Mfg No
Alternator Field
Disconnect
List
233198
2101
No
$72.55
233197
2100
Yes
$84.18
Battery Switch ICON Label Kit
• 18 icon labels for battery switches, use to identify circuits
• Examples: Battery, Bow Thruster, Chassis, Engine, House
Order No
Mfg No
List
386768
7902
$7.00
Cole Hersee Master Disconnect Switch
• Protect against electrical fires, tampering, theft, etc.
when equipment is unattended.
• Igniton protected.
• Ratings: 175 amps continuous
• 800 amps intermittent
• 15 seconds On, 5 minutes Off
• For 6-36 volt, DC electrical systems
• Silver contacts
• Brass case
• Chrome plated lever
• Brass mounting stem 3/4” diameter, 1-13/32” long.
• Two 3/8” diameter stud terminals
• Fits panels up through 15/16” thick.
Mfg No
List
108618
M284-01 BP
$85.48
231135
120
2843011
Mfg No
List
233169
2111
$40.48
Order No
Mfg No
List
233201
2300A
$190.03
Guest Extra Heavy Duty Diesel On/Off Switch
• A heavy-duty on/off switch with alternator field circuit
disconnect for use where high amperage service is required, such as starting diesel engines.
• Rated at 600 amps continuous, 900 amps momentary.
• 5-1/2” square base x 3-1/2” high.
• Four mounting holes on 4-1/2” centers.
Hella Battery Master Switch
• For interrupting power (prevents theft and
short-circuit during absence).
• Removable key.
• Max. load: 100A @ 12V continuous
• 50A @ 24V intermittent.
• Comes with a spare key.
Mfg No
Order No
Guest Heavy Duty Battery Selector Switch
• Heavy-duty switch is designed for the high amperage of marine service.
• Especially important for the large currents needed
to start diesel engines.
• Rated at 360 amps continuous, 600 amps momentary, with alternator field disconnect.
• 5-1/2” square base x 3-1/2” high.
• Four mounting holes on 4-1/2” centers.
Order No
Order No
Guest Cruiser Series Universal Mount Switch
• Without Alternator Field Disconnect.
• Installs in the same cutout and hole patterns as competitive switches.
• High-impact, black molded cases are impervious to petroleum-based liquids for
long life.
• Diameter: 5-1/2”.
List
Order No
Mfg No
List
$27.50
233202
2304A
$266.10
Prices and specifications subject to change without notice.
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Mfg No
List
352159
701 PM
$29.93
BEP Master Battery Switch
• Patented contour lock system, allowing it to be a
stand alone unit, or locked
together with other switches. Also features a control
knob which cannot be removed while in the ON or OFF position, however, it
can be removed by switching to a counterclockwise
45° position.
• The control knob also features an interchangeable
labelling system allowing a full range of applications.
• Removable side plates on 4 sides for access of up to
1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the
switch meets ABYC requirements. The 701 can be
either surface or recess mounted.
Continuous Rating: 275 Amps DC
Intermittent Rating: 455 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 48 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Ignition protected
Termination Stud Size:
2 x 10 mm (3/8 inch)
Dimensions: 2.75” x 2.75” x 3” H
Tin plated copper studs and nuts
Order No
352137
Mfg No
701
List
$33.48
Order No
Mfg No
List
352148
701S
$43.90
Order No
Mfg No
List
352126
700
$35.38
BEP Battery Knob Options for 701 Switch
Order seperately - these replace existing knobs.
701-KEY is the standard replacement knob.
701-KEY-EP is for use where emergency parallel switch
needs to be highlighted.
Order No
BEP 701S-PM Panel Mount
• Fits standard BEP battery switch label range.
• CSK recessed for surface mount application
• Standard 2 1/16” hole cut out (Same as standard
gauge hole)
• Ignition Protected
• Full access for cables with no restrictions
• Fit into Contour Connect Panel
• Continuous Rating: 200 Amps DC
• Intermittent Rating: 300 Amps DC
• Cranking Rating: 1000 Amps DC
• Voltage Rating: 48 Volts DC
• Operation: 1-2-Both-Off
• Mounting: Recessed or Surface
• Ignition protected
• Termination Stud Size: 3 x 5/16”
Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
Tin plated copper studs and nuts
Order No
352160
Mfg No
701S-PM
Mfg No
Color
List
352204
701-KEY
Red
$9.60
352215
701-KEY-EP
Yellow
$13.05
BEP Digital Voltage Sensing Relay (DVSR)
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single
charging source. When the voltage on the start battery
rises to a charged level, the DVSR engages allowing the
2nd battery to charge. When charging stops and voltage
falls, the DVSR will disengage, isolating the two batteries
from each other. Dual sensing functionality enables the
sensing of two battery banks, allowing two way charging.
List
Order No
Mfg No
List
$38.93
352259
710-140a
$119.58
Prices and specifications subject to change without notice.
121
Battery Switches
Order No
BEP Mini Selector Battery Switch
• The 701-S is the most compact selector switch available on the market.
• Housed in the same dimensions as the 701, and
includes the same removable side plates and back
cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution
clusters, the 701-S offers a simple economical way
of separating two batteries.
Continuous Rating: 200 Amps DC
Intermittent Rating: 300 Amps DC
Cranking Rating: 1000 Amps DC
Voltage Rating: 48 Volts DC
Operation: Selector 1-2-Both-off
Mounting: Recessed or surface
Termination Stud Size: 3 x 5/16”
Tin Plated copper studs and nuts
Ignition Protected
Dimensions: 69 x 69 x 75H mm (2.75 x 2.75 x 3H”)
Electrical
BEP 701 Panel Mount
Designed specifically for panel mount applications. This
range gives a very compact, versatile solution with
the following features:
• Fits standard BEP battery switch label range.
• Removable key.
• CSK recessed for surface mount application.
• Standard 2 1/16” hole cut out (Same as standard
gauge hole).
• Ignition Protected.
• Full access for cables with no restrictions.
• Fit into Contour Connect Panel.
Continuous Rating: 275 Amps DC
Intermittent Rating: 455 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 48 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Ignition protected
Termination Stud Size:
2 x 10 mm (3/8 inch)
Dimensions: 69 x 69 x 75h mm
(2.75 x 2.75 x 3h inches)
Tin plated copper studs and nuts
BEP Easyfit Battery Switch
• For installations where
switch needs to be recessed through varying
thicknesses of panels.
This is achieved with an
easily removable threaded
ring allowing for panel
thicknesses up to 19mm (3/4”).
• Features removable key 45° past the off position, labeled handle and a removable back cover which covers exposed terminals to meet ABYC specifications.
• The switch can also be surface mounted offering a
unique style compared to other switches available on
the market.
• Can easily be retrofitted in place of most European
post and lever type switches.
Continuous Rating: 275 Amps DC
Intermittent Rating: 455 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 48 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Termination Stud Size: 2 x 10mm (3/8 “)
Tin plated copper studs and nuts
Ignition protected
Battery Switches
Electrical
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
BEP Heavy Duty Battery Switch
• It fits into the same contour lock system as used on
the battery distribution system.
• Rated at 600 amps continuous and 2500 amps
cranking. It is well suited to larger vessels.
• Can be recessed or surface mounted.
• Self cleaning sliding contact.
Continuous Rating: 600 Amps DC
Intermittent Rating: 800 Amps DC
Cranking Rating: 2500 Amps DC
Voltage Rating: 48 Volts DC
Operation: On / Off
Mounting: Recessed or Surface
Termination Stud Size: 2 x 12 mm (1/2 inch)
Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches)
Tin plated copper studs and nuts
Ignition protected
Termination Stud Size: 2 x 12 mm (1/2 inch)
Order No
Mfg No
List
352171
720
$100.70
BEP Double Pole Battery Switch
• Meets the needs of vessels being built to survey
requirements where positive and negative supplies
must be isolated at the same time.
• Not recommended for switching house and start battery systems at the same time. It is recommended to separate switches for house and start for safety
reasons. You may need to isolate your engine battery
in an emergency and not your house battery, which
typically powers the communications.
Continuous Rating: 400 Amps DC
Intermittent Rating: 525 Amps DC
Cranking Rating: 1500 Amps DC
Voltage Rating: 48 Volts DC
Operation: On/Off two poles
Mounting: Recessed or surface
Termination Stud Size: 4 x 12mm (1/2”)
Tin plated copper studs and nuts
Dimensions: 102 x 102 x 90H (4 x 4 x 3.5H”)
Ignition protected
122
BEP Heavy Duty Battery Selector Switch
• Housed in the same module as the 720 It includes the
same removable plates and back cover.
• While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the
721 offers a simple economical way of separating
two batteries.
• Please note selector switches will not separate electronics from harmful engine starting spikes.
Continuous Rating: 350Amps DC between common B1
or B2
Continuous Rating: 500 Amps DC between common B1
+ B2
Intermittent Rating: 500 Amps DC
Cranking Rating: 1500 Amps DC
Voltage Rating: 48 Volts DC
Operation: Selector-Battery 1-2-Both-off
Mounting: Recessed or surface
Termination Stud Size: 3 x 10mm(3/8”)
Tin plated copper studs and nuts
Dimensions: 102 x 102 x 90H (4 x 4 x3.5H”)
Ignition protected
Order No
Mfg No
List
352193
721
$69.70
BEP Remote Operated 275 Amp Motorised Battery
Switch
MD range of battery switches allow you to install the
battery switch very close to the battery, reducing cable
lengths to starter motor. They are also ideal for remote
isolation of bow thrusters.
•Manual override option to meet CE requirements.
•Power Draw: Switch off: 12mA. Switch on: 15 mA,
switch operating 120 mA for 3 seconds @ 12 v nominal.
•LED status identification for remote control switch.
•Same capacities/specifications and mounting options
as standard BEP battery switches.
•Uses same interchangable labeling system as BEP
battery switches.
275 Continuous Amps
455 Intermittent Amps
1250 Cranking Amps
9.5 - 32 Volts
Order No
Mfg No
List
352226
701-MD
$213.83
BEP Remote Key Panel for 701-MD & 720-MDO
For the remote operation of the 701-MD and 720-MD
motorised battery switch range. It can be mounted
standalone or as a component of the Contour Connect
range.
BEP Version 8 Remote 500 Amp H.D. Remote Motorised Battery Switch
Order No
Mfg No
List
High current, remotely activated battery switch.
352248
80-724-0006-00
$99.99
Allows convenient operation with the remote switch
while the battery switch is positioned where cable runs
can be minimized which allows smaller gauge cable to
be used, resulting in cost and weight savings.
As well as remote, motorised operation, the 720-MDO
can be manually over-ridden.
From the “Manual Off” position, the switch knob can
also be removed, providing security, particularly during
servicing.
Tinned copper conductors, stainless steel nuts and high
temperature, fibre reinforced plastics.
Ignition protected.
On/Off switching operation, and may be recessed or
surface mounted.
The Version 8 printed circuit boards include the latest
developments in digital circuitry, and optical position
sensing. These result in significant improvements to
BEP Label Set for BEP Switches
voltage measurement circuits, switch operation, and
provide low power consumption.
Label Set 713 suits Battery Switches 701 to 720.
Order No
Mfg No
List
Order No
Mfg No
List
Order No
Mfg No
List
352182
720-DP
$144.58
352261
713
$21.85
352237
720-MDO
$279.65
Prices and specifications subject to change without notice.
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
A/C Delco Voyager 12 Volt Batteries
Maintenance-free deep-cycle design allows batteries to provide long streams of power for extended periods.
• Heat-sealed covers provide added strength and rigidity.
• Rope handles with contoured handgrips for comfortable, convenient transport.
• Thermoplastic reinforced plates help increase protection against plate shorting and improve durability.
• Built-in “Green Eye” hydrometer.
• Both positive and negative grids are lead/calcium alloy to maximize corrosion resistance, increase cycle life, and reduce water consumption for battery durability.
Batteries available by store pick-up only. Not UPS Shipable. $15.00 core charge on all AC Delco batteries.
Order No
Mfg No
Group
Cranking Amps
Dimensions
List
200544
M24MF
24
620
10.9” L x 6.8” Wx 9” H
$139.99
200545
M27MF
27
720
12.6” L x 6.8” W x 9” H
$149.99
200583
M29HMF
30
900
30.5” L x 6.7” W x 9.1” H
$159.99
Mfg No
120012
EX16CLB
120010
XHDM24
120007
XXHDM24
120125
Cranking Amps
Application
Size
List
300
Kawasaki, Yamaha Jet Skis
6-15/16” x 4” x 6-1/8”
$79.99
625
O/B and I/B engines up to 300 hp + limited options (1)
11-3/8” x 6-3/4” x 10”
$109.99
1000
O/B and I/B engine up to 750 hp + limited options (1)
and electronic options (2)
11-3/8” x 6-3/4” x 10”
$129.99
NC24
630
All engines to 350 hp
11-3/8” x 6-3/4” x 10”
$123.99
120009
NC27
730
All engines from 150 hp to 300 hp with electronics
options (2) + trolling (3) or cycling.
13” x 6-13/16 x 10-1/4”
$144.99
120008
NG27
670
All engines from 150 hp to 600 hp with full options (4)
+ trolling (3) + full deep cycle (5)
12” x 6-13/16 x 9-7/16”
$169.99
120005
NG4D
1400
All diesel engines + all auxiliary items
20-11/16” x 8-11/16 x 9-7/8”
$338.99
120006
NG8D
1725
All diesel engines + all auxiliary items
20-3/4” x 11-1/8” x 10-7/8”
$406.99
Odyssey Marine Batteries
Phenomenal starting power and massive deep cycle reserve power in one battery!
Some batteries provide enormous cranking power. Others, deep cycle reserve power. The revolutionary ODYSSEY® battery is designed to
do both.
How is this possible? The answer begins with flat plates made of 99.99% pure virgin lead - not lead alloy. Pure lead plates can be made
thinner, so we can fit more of them in the battery. More ODYSSEY battery plates mean more plate surface area. And that means more power
– twice as much as conventional batteries.
Batteries available by store pick-up only. Not UPS Shipable.
Order No
Mfg No
Type
Voltage
Cranking Amps
Length
Width
Height
Warranty
List
120003
PC1700T
Group 27 Low Profile w ith 3/8” Cable Bolt
12
875
13.02”
6.62”
6.93”
4 Year Free Replacement
$490.00
120015
PC1500MST
Group 24; Most Powerful on Market
12
880
10.85”
6.76”
7.82”
4 Year Free Replacement
$409.00
120001
PC2150S
Group 31;
12
1150
13.00”
6.80”
9.41”
4 Year Free Replacement
$596.00
120004
PC1200T
Trolling Motor
12
550
7.87”
6.66”
6.80”
3 Year Free Replacement
$335.00
140389
PC625
PWC (Fits most models)
12
265
6.70”
3.90”
6.89”
2 Year Free Replacement
$169.00
Prices and specifications subject to change without notice.
123
Marine Batteries
Order No
Electrical
Exide Nautilus Marine Batteries
Features and benefits
• Heavier cast-on strap - to withstand vibration.
• Stainless steel threaded and SAE posts.
• Lead/Antimony construction. Install it. Forget it.
• Enveloped polypropylene separators - for enhanced vibration resistance.
• Rigid polypropylene case and cover - for longer life in the marine environment.
(1) Limited Options: Instrumentation, Bilge Pump, Blower, Lighting.
(2) Electronic Options: Includes limited options and electronics (Loran, GPS, VHF, Depth and Fish Finder, Auto Pilot, Trim Tabs, Chart Plotter.)
(3) Trolling: Includes limited options and electric trolling motor, live wells.
(4) Full Options: Includes instrumentation, Bilge Pump, Blower, Lighting, all electronic options plus Down Riggers, Windlass, Inverter, Trolling Plates, Full Galley and trolling
options.
(5) Full Deep Cycle: Operating full options without engine or generator support, i.e. relying solely on battery for power supply.
Batteries available by store pick-up only. Not UPS Shipable.
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Odyssey Battery Trays
Attwood Battery Holder Trays
Heavy-duty, non-corrosive black plastic. Includes adjustable height crossbar and two
retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design.
Install with #10 screws.
Mfg No
Group
Dimensions
List
244022
9090-5
24
10-5/8” x 6-3/4” x 8-3/4”
$11.52
244021
41507-1
27
12-1/8” x 6-3/4” x 8-3/4”
$11.52
Battery Trays & Boxes
Electrical
Order No
Order No
Mfg No
Fits
List
130505
PC1700-TRAY
13.30”L x 8.50”W x 6.75”H
$40.00
140406
PC2150-TRAY
13.30”L x 8.63”W x 8.30”H
$47.00
130504
0-01TRAY-PC1
8.90”L x 8.50”W x 6.60”H
$40.00
Attwood Battery Boxes
All battery boxes meet U.S.C.G. spec. no. 183.420 as an OEM-installed battery hold
down system. Polypropylene construction for total acid resistance. Hold-down straps
resist 350 lbs. of force. Mounting hardware is included. Vented. Black.
Order No
Mfg No
Group
Dimensions
List
244020
9065-1
24
14”x9-5/8”x10-5/8”
$12.53
108159
9067-1
27
16-7/8”x9-5/8”x10-7/8”
$14.93
Detmar Battery Holder
Keeps batteries securely in place. Prevents loosening of battery cables or spillage of
battery acid. Easy to install. Adjustable height crossbar for secure fit. High-strength
polypropylene cross piece with stainless steel hold down rods and fasteners.
Order No
Mfg No
Fits
List
233129
233130
101512S
24/24M
$17.52
101551S
27/27M/31
$17.55
042208
042204
042212
042209
Moeller Roto-Molded Battery Boxes
Seamlessly designed to tackle the elements for long-life battery performance.
• Non-corrosive high-strength polyethylene construction resists chemicals and rust.
• Maintains tough properties with nominal 0.185” wall thickness on roto-molded
(mixed linear-black) boxes.
• Complies to industry requirements and meets Coast Guard regulations (E10).
T-H Marine Battery Holder Trays
Battery holder fits into a limited space and is simple to install. The patented polypropylene hold down strap with positive locking quick disconnect buckle matched
with a molded base that mounts with four (4) #10 pan head screws provides not
only simple installation but changing or replacing batteries is quick and easy. Meets
NMMA specs.
Order No
Mfg No
Group
List
302664
BH-24P-DP
24
$15.12
302675
BH-27P-DP
27
$15.12
730258
BH-31P-DP
29-31
$15.12
124
Order
No
Mfg No
259004
042208
259006
042204
259007
042212
259005
042209
Dimensions
Fits
List
25.00” L x 14.87” W x 11.62” H
8D Battery
Low Profile
$123.20
4D Battery
$123.63
17.50” L x 12.87” W x 11.25” H
Double Battery Box
$118.08
24.37” L x 14.50” W x 14.12” H
8D Battery
High Profile
$129.53
23.87” L x 12.50” W x 13.5” H
Prices and specifications subject to change without notice.
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Guest Battery Pal™ Model 2602 Battery Charger
Storage/Maintenance Charger
A float charger that will keep your 12 volt batteries factory fresh without overcharging
or boiling electrolyte. It supplies only the maintenance charge necessary to preserve
battery life. Features an automatic safety shutoff and an LED indicator of proper operation.
Order No
233204
Mfg No
List
2602
$75.60
Guest ConnectCharge Inlet
For use with Guest Battery Chargers with Connect Charge Plug only.
Mounts to dash from rear with threaded locking ring or from the front with three
screws through fact plate.
Eliminates rewiring, plug snaps into inlet locking tab.
Watertight lid protects AC plug.
Order No
Mfg No
List
293573
150CCI
$26.35
Electrical
Guest 20 Amp Dual Trolling Motor Battery
Charger
Total Amps: 20 Amps
Number of Outputs: 2
Amps per output: 10/10
Battery System: 2-12V or 1-24V
Output Voltage: 12VDC per output
DC Output: 2 -6’ DC Outputs w/ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connection: 6’ AC Cord w/Connect Charge Pro
Dimensions: 9.60” x 7.0” x 2.63”
Weight: 8.0 Lbs.
Order No
Mfg No
List
293538
2620A
$358.25
Guest Bluewater Cruiser Chargers
Common Features:
• Efficient 3-stage charging with low AC draw.
• Provides and extra boost for engine starting.
• Compact, corrosion- and water-resistant case.
• Overload protection.
• Igntion protected.
• Reverse polarity protection. Automatic reset.
A 3-bank, 30 amp charger (20A/5A/5A) with a built-in ammeter. The advanced electronic switching technology lets you charge three banks quickly without the excess
weight, long charging cycles and annoying hum of old style chargers.
9” W x 12-1/4” H x 7-1/4” D.
Order No
293527
Mfg No
2632A
Order No
Mfg No
List
220323
SE-520MA
$90.00
Battery Chargers
Guest Battery Charger Model 2611
A trolling motor charger for the boater who needs 10-12 hour full recovery. Ideal for
systems with two 12 volt batteries or a 24 volt configuration. Comes prewired with a
6’ AC cord and two 4’ DC outputs. 10 amps output.
Schumacher 2/10A 12V Automatic/Manual Traditional Charger
Dimensions: 7-3/4” W x 5-1/8” H x 2-1/16 D.”
economical 12 volt charger can be used two ways: manual or fully automatic.
Weighs 6 lbs.
No overcharging worries when in fully automatic mode.
Order No
Mfg No
List
10 amp fast charge – for everyday charging needs. Charges in 3 to 5 hours.
2 amp trickle charge – charges a small 12 volt battery in 2 to 12 hours
293440
2611A
$222.50
LED light – signals Fully Charged.
CSA Certified.
Schumacher Fully Automatic Battery Charger
• 10/2 amp
• 10 amp rate.
• Reverse polarity protection.
• Fully automatic
• Easy to read meter with LED light that signals when fully charged.
• Charges 12-volt batteries
• 2 Amp trickle/maintenance charge turns on and off as needed.
• 2 year manufacturer’s limited warranty.
Automatic circuit assures full charge, even on deep cycle batteries. Output shuts off
completely at full charge, but turns back on as needed.
List
Order No
Mfg No
List
$704.10
220322
SE-1275A
$109.99
Prices and specifications subject to change without notice.
125
Battery Chargers • Jumpstarter / Powerpack / Compressor
Electrical
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Schumacher Ship ‘N Shore Supreme Automatic Battery Charger
The ultimate charger for deep cycle, marine and marine starting batteries. Charges
and maintains most Marine Group 24 to 30, 12-Volt wet-cell batteries.
• 12 amp charge is 20% faster than a 10 amp
• Fully Automatic-Automatically maintains the battery when fully charged. Resumes
continuous charging when battery becomes discharged.
• Charges up to 16 volts and is suitable for Delco Voyager and similar batteries.
• Manual Operation.
• Microprocessor controlled - provides a 3-step charging system that includes floatmode maintaining and desulfation mode.
• LEDs - Power On, Reversed Hook-up, and Charging and Maintaining.
Order No
Mfg No
List
299500
SS120A-PE
$109.00
Schumacher Ship ‘N Shore Charger/ Maintainer/Tester
For 12 Volt Marine, Deep-Cycle, Automotive, AGM and Gel Cell Batteries.
15 Amp Fast Charge - charger monitors battery condition and adjusts charge rate
downward to prevent battery damage; for car, truck, marine, RV, farm equipment,
AGM, gel cell and deep- cycle batteries
10 Amp Fast Charge - self-adjusting charge rate for everyday charging needs and
keeping your battery in peak condition
2 Amp Slow Charge - for charging small batteries and maintaining large ones; charges
motorcycle, ATV, snowmobile and lawn tractor batteries
Easy-To-Read Digital Meter
System Test - helps diagnose problems with battery and charging system*
Order No
Mfg No
List
299537
SSC-1500A
$109.99
Cobra Electronics Jumpstarter / Powerpack / Compressor
• Provides AC/DC portable power source anywhere and anytime.
• Runs household appliances up to 100 watts.
• Charge electric devices with USB port at 500mA.
• Super bright emergency light.
• Boost vehicles at 1200 Watts within seconds.
• 260 PSI air compressor.
126
ProSport Battery Chargers
• Distributed-On-Demand™ Technology
• Automatically charge and maintain engine crank battery while sensing and distributing 100% of the available charging amps to trolling motor or house bank
battery.
• Fully charge and extend the life of your batteries with ProSport’s multi-stage performance charge profiles. Automatically charges and conditions your batteries
with a built-in safe maintenance mode for long or short term storage.
• 3 Charge Profiles - User selectable performance charge profiles for: Flooded(leadacid)/STD AGM, GEL & High Performance(HP) AGM.
• High Visibility LED Status Center provides at-a-glance status of: AC Power, Charge
Mode, Battery Type, and Ready/Maintenance Mode.
• Extruded Aluminum Housing for superior heat transfer and durability.
• Dynamic Thermal Output Control controls charging amps while maintaining the
recommended charger temperature.
• Compact and rugged design, 100% waterproof and shockproof, dual inline DC
safety fuses for trolling motor / accessory battery banks, dynamic thermal output
control, over voltage, overload, overtemperature, reverse polarity, and ignition protection. Prewired for easy installation
Order No
Mfg No
Voltage
Amps
Banks
List
186001
42006
12
6
1
$129.99
186012
42012
12 or 24
12
2
$189.99
186023
42021
12 or 24 or 36
20
3
$262.00
63180
63140
63120
63130
ProNauticP Series Battery Chargers
Up to 12 performance and precision 4-stage charging profiles: Charge, Condition,
Maintain and Re-condition. Automatic power mode for 12 volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.
Auto-ranging (100-250 VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. Consumes less power so more AC power is available on board.
Automatically senses and distributes its maximum amp output to any one bank or
combination of banks.
Automatically programs conditionaing time based on discharge stage of batteries.
Automatically de-sulfates batteries after 21 days in the maintain mode, improving
reserve power performance and extending battery life.
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered
consuming less energy during storage periods (for flooded and sealed charge profiles).
Real time indication of wiring faults or adverse conditions that may impact the operation of boat’s charging system.
Quiet operation.Automatic temperature compensation and built-in safety remote temperature probe included.
Order No
Mfg No
Amps
Banks
Voltage
List
186034
63120
20
3
12
$435.00
186045
63130
30
3
12
$532.00
Order No
Mfg No
List
186056
63140
40
3
12
$572.00
389769
CJI250
$144.99
186067
63180
30
3
24
$918.00
Prices and specifications subject to change without notice.
954-463-4307 • D. S. HULL COMPANY, INC. • 1-800-437-1002
Eveready 6 Volt Lighting Battery
Cobra Electronics
Screw type terminals on top of battery.
Microport 130 Watt Power Inverter
Order No
• Provides household power on the go! Its swiveling 12 V DC accessory port plug
converts your vehicle’s cigarette lighter into 120 Volt AC household power.
220247
• Power up office equipment and appliances under 130 watts, including most laptops.
• Also has a USB output, ideal for using/charging most small video games, an
IPod®, a Blackberry®, mobile phones, and many more USB devices. Its compact
size and easy installation makes it ideal for travelers.
Order No
Mfg No
List
389615
CPI130
$49.99
Energizer 3 Volt Lithium Batteries
Lithium battery 3 volt, 1400 mAH. Size (mm): 34 x 16 x 16.
Order No
Mfg No
List
221585
DL123ABPK
$8.95
Electrical
CPI880
Die Hard Alkaline Batteries
CPI1575
CPI2575
Order No
Mfg No
Size
Pack
List
295625
41-1102
AA
8
$5.99
295636
41-1105
AA
24
$14.99
295647
41-1122
AAA
8
$5.99
295658
41-1125
AAA
24
$14.99
Cobra Electronics Power Inverters
It converts battery power to 120 V AC household power, allowing you to power up
office equipment and household appliances from your vehicle. Cigarette lighter cord
and direct-to-battery cables are included. This unit is ideal for laptops, 13” TVs, video
games, CD players, DVD players, cellular phone chargers and much more!
Order No
Mfg No
Watts
List
389644
CPI480
400
$69.99
389658
CPI880
800
$119.99
389663
CPI1575
1500
$249.99
389671
CPI2575
2500
$399.99
Duracell Batteries
Order No
Mfg No
Size
Pack
List
220020
MN2400B4Z
AAA
4
$5.99
220897
MN2400B-10Z
AAA
8
$10.99
221859
MN24B16
AAA
16
$19.99
220019
MN1500B4Z
AA
4
$5.99
220878
MN1500B10Z
AA
8
$10.99
221837
MN1500B16
AA
16
$19.99
220017
MN1400B2Z
C
2
$5.99
220805
MN1400R4Z
C
4
$10.99
220016
MN1300B2Z
D
2
$5.99
220793
MN1300R4Z
D
4
$10.99
221826
MN13R8DW
D
8
$19.99
220021
MN1604B1Z
9V
1
$5.99
220885
MN1604B2Z
9V
2
$10.99
221848
MN16B4DW
9V
4
$19.99
220022
MN908
6V Lantern Spring Terminal
1
$17.99
Prices and specifications subject to change without notice.
127
Battery Chargers • Power Inverters • Inverter Remote Control • Batteries
CPI400
List
$10.99
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement