Ubiquiti Networks BM2HP Instruction manual

Add to my manuals
40 Pages

advertisement

Ubiquiti Networks BM2HP Instruction manual | Manualzz
2
2
English
Deutsch
Español
Français
Italiano
Models:
Bullet/Pico/NanoStation/loco
Typical Deployment
English
Typical Deployment
Bullet PicoStation
NanoStationloco
NanoStation
2
Default IP Address
192.168.1.20
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE on PoE Adapter
POE
LAN
Connect the Power Cord
to the PoE Adapter and
a power outlet
LAN or Computer to
Ethernet Port labeled
LAN on PoE Adapter
Host Computer IP Address
192.168.1.x
Note: Shielded Category 5 (or above) cabling should be
used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the customer’s responsibility to follow local country regulations, including operation
within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
1
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Accessing airOS
1. Make sure that your host machine is connected to the LAN
that is connected to the Ubiquiti device (as shown on the
previous page).
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet (e.g. 192.168.1.100).
3. Launch your web browser. Type https://192.168.1.20 in the
address field and press enter (PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Select your
country from the Country drop-down. To use the product you
must agree to the terms of use. To do so, click I agree to these
terms of use. Click Login.
Note: The country that the product is being used in
should be selected from the Country drop-down. U.S.
product versions are locked to the U.S. Country Code to
ensure compliance with FCC regulations.
The airOS Configuration Interface will appear, allowing you to
customize your settings as needed.
2
Installer Compliance Responsibility
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional
installer's responsibility to make sure the device is operated within
local country regulatory requirements.
Since Ubiquiti Networks equipment can be paired with a variety
of antennas and cables, the Antenna Gain, Cable Loss, and Output
Power fields are provided to the professional installer to assist in
meeting regulatory requirements.
3
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be
submerged by water.
WARNING: Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the limitations
are not followed.
2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an
integral safety ground wire intended for connection to a grounded safety
outlet.
a. Do not substitute the power cord with one that is not the provided
approved type. Never use an adapter plug to connect to a 2-wire outlet
as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the
safety certification, modification or misuse can provide a shock hazard
that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions
about the installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building
installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national
wiring rules and regulations.
4
Limited Warranty
Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s)
furnished hereunder (the “Product(s)”) shall be free from defects in material
and workmanship for a period of one (1) year from the date of shipment by
UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’
sole and exclusive obligation and liability under the foregoing warranty shall
be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product
that fails to conform to the above warranty during the above warranty period.
The expense of removal and reinstallation of any Product is not included in this
warranty. The warranty period of any repaired or replaced Product shall not
extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I)
has been modified and/or altered, or an addition made thereto, except by
Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as
approved by Ubiquiti Networks in writing;
(II)
has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical,
electromagnetic or electrical stress, including lightning strikes, or
accident;
(V) has been damaged or impaired as a result of using third party firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti
label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been
properly installed and used at all times in accordance, and in all material
respects, with the applicable Product documentation; all Ethernet cabling runs
use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is
used, and for indoor installations, indoor cabling requirements are followed.
Returns
No Products will be accepted for replacement or repair without obtaining a
Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during
the warranty period, and the Products being received at UBIQUITI NETWORKS’
facility freight prepaid in accordance with the RMA process of UBIQUITI
NETWORKS. Products returned without an RMA number will not be processed
and will be returned freight collect or subject to disposal. Information on the
RMA process and obtaining an RMA number can be found at:
www.ubnt.com/support/warranty.
5
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE,
SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO
OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED
OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS,
GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY
OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF
VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE
OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH
PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI
NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT
OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT
TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER
PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI
NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS
ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS,
DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR
OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition,
UBIQUITI NETWORKS does not warrant that the operation of the Products
will be error-free or that operation will be uninterrupted. In no event shall
UBIQUITI NETWORKS be responsible for damages or claims of any nature
or description relating to system performance, including coverage, buyer’s
selection of products (including the Products) for buyer’s application and/or
failure of products (including the Products) to meet government or regulatory
requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL
UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT,
SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING
LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE,
INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED
IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR
NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Note
Some countries, states and provinces do not allow exclusions of implied
warranties or conditions, so the above exclusion may not apply to you. You may
have other rights that vary from country to country, state to state, or province
to province. Some countries, states and provinces do not allow the exclusion
or limitation of liability for incidental or consequential damages, so the above
limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL
LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND
ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO
THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The
United Nations Convention on Contracts for the International Sale of Goods
shall not apply to any transactions regarding the sale of the Products.
6
Typische Anwendungsbereiche
Deutsch
Typische Anwendungsbereiche
Bullet PicoStation
NanoStationloco
NanoStation
2
Standard-IP-Adresse
192.168.1.20
Verbinden Sie den
Ethernet-Port des
Ubiquiti-Geräts mit
dem Ethernet-Port mit
der Beschriftung „POE"
am PoE-Adapter.
POE
LAN
Schließen Sie das
Netzkabel an den
PoE‑Adapter und an
eine Steckdose an
Verbinden Sie das LAN
oder den Computer
mit dem Ethernet-Port
mit der Beschriftung
„LAN" am PoE-Adapter.
Host-Computer IP-Adresse
192.168.1.x
Hinweis: Für alle kabelgebundenen Ethernet-Verbindungen
sollten Kabel der Güteklasse 5 (oder höher) verwendet und
über den PoE-Adapter geerdet werden.
NUTZUNGSBEDINGUNGEN: Ubiquiti-Funkgeräte müssen fachgerecht installiert werden. Zur
Erfüllung der Produktgarantie müssen abgeschirmte Ethernet-Kabel und Erdung verwendet werden.
TOUGHCable ist für Anlagen im Freien konzipiert. Es liegt in der Verantwortung des Kunden, die jeweils
geltenden Gesetze und Auflagen einzuhalten. Dies gilt für den Betrieb im Rahmen der zulässigen
Frequenzkanäle, die Sendeleistung und die DFS-Vorschriften (Dynamic Frequency Selection).
7
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Zugriff auf das airOS
1. Verbinden Sie den Host-Computer über Ethernet mit dem
Gerät von Ubiquiti Networks (wie auf der vorangegangenen
Seite dargestellt).
2. Konfigurieren Sie den Ethernet-Adapter des Host-Systems mit
einer statischen IP-Adresse im Subnetz 192.168.1.x
(z. B. 192.168.1.100).
3. Starten Sie Ihren Webbrowser, geben Sie in die Adresszeile
„https://192.168.1.20“ ein und drücken Sie die Eingabetaste.
4. Geben Sie unter „Username“ (Benutzername) und „Password“
(Passwort) den Wert „ubnt“ ein. Wählen Sie in der DropdownListe Ihr Land aus. Sie dürfen das Produkt nur verwenden,
wenn Sie den Nutzungsbedingungen zustimmen. Klicken
Sie dazu auf „I agree to these terms of use“ (Ich stimme den
Nutzungsbedingungen zu). Klicken Sie auf „Login“ (Anmelden).
Hinweis: Wählen Sie in der Dropdown-Liste „Country“
(Länder) das Land aus, in dem das Produkt verwendet
werden soll.
Nehmen Sie die gewünschten Einstellungen auf der
airOS‑Benutzeroberfläche vor.
8
Einhaltung geltender Gesetze und Auflagen
Einhaltung geltender Gesetze und Auflagen
Die Geräte müssen fachgerecht installiert werden, und der
Benutzer, der die Installation durchführt, muss dafür sorgen, dass
die Geräte nicht gegen vor Ort geltende Gesetze und Auflagen
verstoßen.
Die Produkte von Ubiquiti Networks können mit einer Vielzahl
von Antennen und Kabeln kombiniert werden. Um die Einhaltung
von Gesetzen und Auflagen zu erleichtern, haben wir die Felder
„Antenna Gain“ (Antennengewinn), „Cable Loss“ (Kabelverlust) und
„Output Power“ (Abgabeleistung) eingerichtet.
Hinweis: Für EU-Ländern ist der Installer benötigt, um den
Funkbetrieb innerhalb der EIRP gesetzlichen Grenzwerten
zu gewährleisten. Für die EU ist die maximale EIRP Grenze
für 2,4 GHz Betrieb 20dBm. Für 5GHz Betrieb, ist die
maximale EIRP 30 dBm.
9
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Produktgarantie
UBIQUITI NETWORKS, Inc („UBIQUITI NETWORKS“) garantiert, dass die unter
dieser Garantie bereitgestellten Produkte („Produkt(e)“) frei von Material- und
Verarbeitungsfehlern sind. Die Garantie gilt für ein (1) Jahr ab dem Datum
des Versands durch UBIQUITI NETWORKS bei normalem Gebrauch und
Betrieb. UBIQUITI NETWORKS' einzige und ausschließliche Verpflichtung und
Haftung unter dieser Garantie ist im Ermessen von UBIQUITI NETWORKS die
Reparatur oder der Ersatz jedes Produkts, das während der angegebenen
Garantiefrist nicht die genannten Garantiebedingungen erfüllt. Ausbau- und
Wiedereinbaukosten für das Produkt sind nicht in dieser Garantie inbegriffen.
Die Garantiefrist für eine Reparatur oder ein Ersatzprodukt überschreitet nicht
die ursprüngliche Garantiefrist.
Garantiebedingungen
Diese Garantie gilt nicht, wenn das Produkt:
(I)
in irgendeiner Weise verändert oder ergänzt wurde, außer durch UBIQUITI
NETWORKS oder durch von UBIQUITI NETWORKS autorisierte Vertreter
oder nach schriftlicher Genehmigung von UBIQUITI NETWORKS;
(II)
lackiert, mit neuem Branding versehen oder in irgendeiner Weise physisch
verändert wurde;
(III) aufgrund von Fehlern oder Mängeln bei der Verkabelung beschädigt
wurde;
(IV) durch unsachgemäße Verwendung, Missbrauch, Fahrlässigkeit,
ungewöhnliche physikalische, elektromagnetische oder elektrische
Belastungen, einschließlich Blitzschlag, oder ein Missgeschick gelitten hat;
(V) aufgrund der Verwendung von Firmware eines Drittanbieters beschädigt
oder beeinträchtigt wurde; oder
(VI) kein original Ubiquiti MAC-Etikett besitzt oder wenn andere original
Ubiquiti-Etiketten fehlen;
(VII) nicht innerhalb von 30 Tagen nach Ausstellung der Rücksendenummer
(Return Materials Authorization, RMA) bei Ubiquiti eingetroffen ist.
Darüber hinaus gilt diese Garantie nur unter den folgenden Voraussetzungen:
Das Produkt wurde ordnungsgemäß installiert und ausschließlich in
Übereinstimmung mit der entsprechenden Betriebsanleitung verwendet;
als Ethernet-Kabel werden ausschließlich Kabel der Güteklasse CAT5 (oder
höher) verwendet; für Anwendungen im Freien werden abgeschirmte
Ethernet-Kabel verwendet; und für Anwendungen im Innenbereich werden die
Verkabelungsanforderungen für Innenräume eingehalten.
10
Produktgarantie
Reklamationen
Produkte werden nur dann zur Reparatur oder zum Umtausch angenommen,
wenn während der Garantiefrist eine Rücksendenummer (Return Materials
Authorization, RMA) von UBIQUITI NETWORKS eingeholt wurde und die
Produkte auf Kosten des Käufers an das Werk von UBIQUITI NETWORKS gesandt
werden (gemäß Reklamationsverfahren von UBIQUITI NETWORKS). Produkte,
die ohne RMA-Nummer eingesendet werden, können nicht berücksichtigt
werden und gehen auf Kosten des Käufers an diesen zurück oder werden
entsorgt. Informationen über das Reklamationsverfahren und die Beantragung
einer RMA-Nummer finden Sie unter: www.ubnt.com/support/warranty
Haftungsausschluss
MIT AUSNAHME DER IN DIESEM DOKUMENT AUSDRÜCKLICH GENANNTEN
GARANTIEN LEHNEN UBIQUITI NETWORKS, SEINE VERBUNDENEN
UNTERNEHMEN UND SEINE SOWIE DEREN EXTERNE DATEN-, SERVICE-,
SOFTWARE- UND HARDWARE-ANBIETER HIERMIT JEGLICHE DARSTELLUNG
ODER GARANTIE, OB AUSDRÜCKLICH, STILLSCHWEIGEND ODER
GESETZLICH, AB, EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF,
ZUSICHERUNGEN, GARANTIEN ODER GEWÄHRLEISTUNGEN FÜR DIE
MARKTGÄNGIGKEIT, GENAUIGKEIT, QUALITÄT DER DIENSTLEISTUNG
ODER ERGEBNISSE, VERFÜGBARKEIT, QUALITÄT, VIRENFREIHEIT,
UNGESTÖRTE NUTZUNG, EIGNUNG FÜR EINEN BESTIMMTEN ZWECK UND
NICHT-VERLETZUNG VON URHEBERRECHTEN SOWIE ALLE GARANTIEN,
DIE AUS DER VERWENDUNG, NUTZUNG ODER HANDELSPRAXIS IM
ZUSAMMENHANG MIT DIESEN PRODUKTEN UND DIENSTLEISTUNGEN
ENTSTEHEN. DER KÄUFER ERKENNT AN, DASS WEDER UBIQUITI NETWORKS
NOCH SEINE DRITTANBIETER KONTROLLE ÜBER DIE GERÄTE ODER DIE
DATENÜBERTRAGUNG ÜBER KOMMUNIKATIONSMITTEL BEIM KÄUFER,
EINSCHLIESSLICH DES INTERNETS, HABEN UND DASS DIE PRODUKTE
UND DIENSTLEISTUNGEN BESCHRÄNKUNGEN, UNTERBRECHUNGEN,
VERZÖGERUNGEN, ANNULLIERUNGEN UND ANDEREN PROBLEMEN
UNTERWORFEN SEIN KÖNNEN, DIE GELEGENTLICH BEI DER VERWENDUNG
VON KOMMUNIKATIONSEINRICHTUNGEN AUFTRETEN. UBIQUITI NETWORKS,
SEINE VERBUNDENEN UNTERNEHMEN UND SEINE UND DEREN DRITTANBIETER
SIND NICHT FÜR ETWAIGE UNTERBRECHUNGEN, VERZÖGERUNGEN,
ANNULLIERUNGEN, LIEFERFEHLER, DATENVERLUSTE, BESCHÄDIGUNGEN VON
INHALTEN, PAKETVERLUSTE ODER ANDERE SCHÄDEN VERANTWORTLICH, DIE
SICH AUS EINEM DER VORGENANNTEN ANLÄSSE ERGEBEN. Darüber hinaus
garantiert UBIQUITI NETWORKS nicht, dass der Betrieb der Produkte frei von
Fehlern oder Störungen verläuft. UBIQUITI NETWORKS haftet keinesfalls
für Schäden oder Forderungen jeglicher Art im Zusammenhang mit der
Systemleistung; dieser Ausschluss gilt auch für die Abdeckung, die Auswahl
der Produkte durch den Käufer für die Zwecke des Käufers und/oder die
Nichteinhaltung staatlicher oder amtlicher Anforderungen hinsichtlich der
Produkte.
11
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Haftungsbeschränkung
AUSSER IM JEWEILIGEN GESETZLICH VORGESCHRIEBENEN RAHMEN
ÜBERNEHMEN UBIQUITI ODER SEINE TOCHTERGESELLSCHAFTEN,
VERBUNDENEN UNTERNEHMEN ODER LIEFERANTEN KEINERLEI HAFTUNG
FÜR DIREKTE, SPEZIELLE, ZUFÄLLIGE, FOLGE- ODER ANDERE SCHÄDEN
(EINSCHLIESSLICH ENTGANGENER GEWINNE, VERLUST VON DATEN ODER
KOSTEN FÜR AUSFALLZEITEN), DIE SICH AUS DER NUTZUNG, DER NICHT
MÖGLICHEN NUTZUNG ODER DEN ERGEBNISSEN DER NUTZUNG DES
PRODUKTS ERGEBEN, SEI ES AUF DER BASIS DER GARANTIE, DES VERTRAGS, DES
VERTRAGSRECHTS ODER ANDERER RECHTSGRUNDLAGEN, UND UNABHÄNGIG
DAVON, OB AUF DIE MÖGLICHKEIT SOLCHER SCHÄDEN HINGEWIESEN WURDE.
Hinweis
Einige Länder oder Staaten erlauben keinen Ausschluss von stillschweigenden
Garantien oder Bedingungen, sodass die oben genannten Ausschlüsse für
Sie möglicherweise nicht gelten. Sie haben u. U. andere Rechte, die je nach
Land oder Staat variieren können. Einige Länder oder Staaten erlauben
keinen Ausschluss oder keine Einschränkung der Haftung für zufällige oder
Folgeschäden, sodass die oben genannten Ausschlüsse für Sie möglicherweise
nicht gelten. AUSSER IM JEWEILIGEN GESETZLICH ZULÄSSIGEN RAHMEN
WERDEN DIE GESETZLICH VERANKERTEN RECHTE, DIE FÜR DIE LIZENZ JEDER
SOFTWARE (DIE IN DAS PRODUKT EINGEBETTET IST) GELTEN, DURCH DIESE
GARANTIEBEDINGUNGEN NICHT AUSGESCHLOSSEN, EINGESCHRÄNKT ODER
GEÄNDERT, SONDERN GELTEN ERGÄNZEND DAZU. Das Übereinkommen der
Vereinten Nationen über Verträge über den internationalen Warenkauf findet
auf die Transaktionen zum Verkauf der Produkte keine Anwendung.
12
Implantación típica
Español
Implantación típica
Bullet PicoStation
NanoStationloco
NanoStation
2
Dirección IP
predeterminada
192.168.1.20
Puerto Ethernet en el
dispositivo Ubiquiti al
puerto Ethernet (con
la etiqueta POE) del
adaptador PoE
POE
LAN
Conecte el cable de
corriente al adaptador
PoE y a una toma de
corriente
LAN u ordenador al
puerto Ethernet (con
la etiqueta LAN) del
adaptador PoE
Dirección IP del
ordenador host
192.168.1.x
Nota: Se debe utilizar cable blindado de categoría 5
(o superior) en todas las conexiones Ethernet, y se debe
conectar a tierra mediante la toma de tierra de CA
del PoE.
CONDICIONES DE USO: Los dispositivos de radio de Ubiquiti deben ser instalados por un profesional.
La garantía del Producto estipula que debe utilizarse un cable Ethernet blindado y toma a tierra.
TOUGHCable está concebido para instalaciones en el exterior. El cliente deberá responsabilizarse de
cumplir con la legislación nacional, incluyendo la utilización de canales de frecuencia legales, el uso de
una potencia de salida adecuada y el uso de una selección de frecuencia dinámica (DFS) apropiada.
13
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Acceso a airOS
1. Asegúrese de que su equipo host está conectado a través de
Ethernet al dispositivo Ubiquiti Networks (tal como se muestra
en la página anterior).
2. Configure el adaptador Ethernet de su sistema host con una
dirección IP estática en la subred 192.168.1.x
(por ejemplo: 192.168.1.100).
3. Inicie su navegador Web e introduzca https://192.168.1.20 en
el campo de direcciones y pulse intro (PC) o retorno (Mac).
4. Introduzca ubnt en los campos Username y Password (Nombre
de usuario y Contraseña). Elija su país en la lista desplegable
Country (País). Para utilizar este producto, debe aceptar las
condiciones de uso. Para ello, haga clic en I agree to these
terms of use (Acepto estas condiciones de uso). Haga clic en
Login (Iniciar sesión).
Nota: Debe elegirse el país en el que se está utilizando
el producto en la lista desplegable Country (País).
Aparecerá la interfaz airOS, lo que le permitirá personalizar la
configuración según sea necesario.
14
Responsabilidad de cumplimiento por parte del instalador
Responsabilidad de cumplimiento por parte del instalador
La instalación de los dispositivos debe correr a cargo de un
profesional cualificado. Es responsabilidad del instalador
garantizar que el dispositivo se utiliza de conformidad con la
normativa del país.
Puesto que el equipo Ubiquiti Networks puede utilizarse con
diferentes antenas y cables, se incluyen los campos Antenna Gain
(Ganancia de antena), Cable Loss (Pérdida de cable) y Output
Power (Potencia de salida) para ayudar al instalador a cumplir la
normativa.
Nota: Para los países de la UE, el instalador tiene la
obligación de garantizar el funcionamiento de radio dentro
de los límites reglamentarios EIRP. Para la UE, el límite
máximo de EIRP para la operación de 2,4 GHz es 20 dBm.
Para la operación de 5 GHz, la EIRP máxima es 30 dBm.
15
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Garantía limitada
UBIQUITI NETWORKS, Inc ("UBIQUITI NETWORKS") garantiza que los productos
ofrecidos a continuación (en lo sucesivo, el Producto o los "Productos"), no adolecen
de defectos de material o fabricación durante el periodo de un (1) año a partir de
la fecha de envío por parte de UBIQUITI NETWORKS, y en condiciones de uso y
funcionamiento normales. Al amparo de la siguiente garantía, la única obligación y
responsabilidad de UBIQUITI NETWORKS será la de reparar o sustituir, a su discreción,
cualquier Producto defectuoso que no funcione según lo especificado durante el
periodo de la garantía. Esta garantía no incluye los gastos derivados de la retirada y
reinstalación de cualquier Producto. El periodo de garantía para cualquier Producto
reparado o sustituido no se ampliará más allá del periodo original.
Condiciones de la garantía
La garantía mencionada anteriormente no se aplicará si los Productos:
(I)
se han modificado, alterado o transformado por personas ajenas a Ubiquiti
Networks, que no hayan sido autorizadas o aprobadas por Ubiquiti Networks, o
que no cuenten con la autorización por escrito de Ubiquiti Networks;
(II)
se han pintado, renombrado o modificado físicamente de alguna manera;
(III)
se han dañado debido a errores o defectos en los cables;
(IV) se han utilizado de forma indebida, se han sometido a sobrecargas físicas,
electromagnéticas o eléctricas fuera de lo normal, incluidas las descargas
producidas por la caída de un rayo, o han sufrido daños debido a negligencia o
accidente de cualquier tipo;
(V)
se han dañado o estropeado a consecuencia del uso de software de terceros; o
(VI) no incluyen la etiqueta original de Ubiquiti MAC, o les falta cualquier otra
etiqueta original de Ubiquiti.
(VII) no han sido recibidos por Ubiquiti en un plazo de 30 días desde la emisión del
RMA.
Además, la garantía mencionada anteriormente solo se aplicará sí: el producto se ha
instalado correctamente y se ha utilizado siempre, y en todos los aspectos materiales,
según lo estipulado en la documentación correspondiente del Producto; la red
Ethernet utiliza cables CAT5 (o superiores), las instalaciones para el exterior emplean
cables Ethernet blindados y las instalaciones para el interior hacen uso de cables
adecuados.
Devoluciones
No se aceptará la reparación o sustitución de un Producto si este no cuenta con un
número de autorización para la devolución de materiales (RMA) emitido por UBIQUITI
NETWORKS durante el periodo de la garantía; los Productos se deberán enviar a la
fábrica de UBIQUITI NETWORKS con el franqueo pagado, conforme al proceso RMA
de UBIQUITI NETWORKS. Aquellos Productos devueltos sin un número RMA no serán
procesados y se devolverán a portes debidos o bien se desecharán. Para obtener más
información sobre el proceso RMA y cómo obtener un número RMA, visite:
www.ubnt.com/support/warranty.
16
Garantía limitada
Descargo de responsabilidad
A EXCEPCIÓN DE CUALQUIER GARANTÍA EXPRESA PROPORCIONADA EN EL
PRESENTE DOCUMENTO, UBIQUITI NETWORKS, SUS FILIALES Y SUS PROVEEDORES
EXTERNOS DE DATOS, SERVICIOS, SOFTWARE Y HARDWARE RENUNCIAN A LLEVAR
A CABO CUALQUIER OTRO TIPO DE GARANTÍA O DECLARACIÓN, DE FORMA
EXPRESA, IMPLÍCITA O LEGAL, INCLUYENDO, ENTRE OTROS, DECLARACIONES,
GARANTÍAS, GARANTÍAS DE COMERCIALIZACIÓN, PRECISIÓN, CALIDAD DE
SERVICIO O RESULTADOS, DISPONIBILIDAD, CALIDAD SATISFACTORIA, AUSENCIA
DE VIRUS, USO Y DISFRUTE, ADECUACIÓN PARA UN PROPÓSITO CONCRETO Y LA
NO VULNERACIÓN,ASÍ COMO CUALQUIER GARANTÍA QUE SURJA DURANTE LA
TRANSACCIÓN, EL USO O LA VENTA DE DICHOS PRODUCTOS Y SERVICIOS. EL
COMPRADOR ACEPTA QUE NI UBIQUITI NETWORKS NI SUS PROVEEDORES EXTERNOS
CONTROLAN EL EQUIPO DEL COMPRADOR O LA TRASFERENCIA DE DATOS A TRAVÉS
DE INFRAESTRUCTURAS DE COMUNICACIÓN, INCLUYENDO INTERNET, Y QUE ES
POSIBLE QUE LOS PRODUCTOS Y SERVICIOS ESTÉN SUJETOS A LIMITACIONES,
INTERRUPCIONES, RETRASOS, CANCELACIONES Y OTROS PROBLEMAS DERIVADOS
DEL USO DE DICHAS INFRAESTRUCTURAS DE COMUNICACIÓN. UBIQUITI NETWORKS,
SUS FILIALES Y SUS PROVEEDORES EXTERNOS NO SE HACEN RESPONSABLES DE
CUALQUIER INTERRUPCIÓN, RETRASO, CANCELACIÓN, ERROR EN LA ENTREGA,
PÉRDIDA DE DATOS, DAÑO EN EL CONTENIDO, PÉRDIDA DE PAQUETES O CUALQUIER
OTRO DAÑO SUFRIDO A CONSECUENCIA DE CUALQUIERA DE LAS RAZONES
MENCIONADAS ANTERIORMENTE. Además, UBIQUITI NETWORKS no garantiza que
los Productos funcionarán sin errores, o que lo harán de manera ininterrumpida.
UBIQUITI NETWORKS no se hará responsable, en ningún caso, de los daños o
reclamaciones de cualquier naturaleza o descripción relacionados con el rendimiento
del sistema, como la cobertura, la selección y el uso de productos (incluidos
los Productos) por parte del comprador y el incumplimiento de los requisitos
gubernamentales o normativos por parte de los productos (incluidos los Productos).
Limitación de la responsabilidad
A EXCEPCIÓN DE LO PERMITIDO POR LA LEGISLACIÓN LOCAL, NI UBIQUITI NI SUS
FILIALES Y PROVEEDORES SE HARÁN RESPONSABLES, EN NINGÚN CASO, DE DAÑOS
DIRECTOS, ESPECIALES, FORTUITOS O EMERGENTES (INCLUYENDO LA PÉRDIDA
DE BENEFICIOS, LA PÉRDIDA DE DATOS Y LOS COSTES POR INACTIVIDAD), QUE
PUEDAN SURGIR DEL USO, LA INCAPACIDAD PARA EL USO O LOS RESULTADOS DEL
USO DEL PRODUCTO, YA SEAN BASADOS EN LA GARANTÍA, CONTRATO, PERJUICIO
O CUALQUIER OTRA TEORÍA LEGAL, INDEPENDIENTEMENTE DE QUE SE LE HUBIERA
INFORMADO DE LA POSIBILIDAD DE DICHOS DAÑOS.
Nota
En algunos países, estados y provincias no está permitida la exclusión de garantías
o condiciones implícitas, por lo que es posible que la exclusión mencionada
anteriormente no sea aplicable a su caso. En función del país, el estado o la provincia
en que se encuentre, es posible que disfrute de otros derechos. En algunos
países, estados y provincias no está permitida la exclusión o la limitación de la
responsabilidad por daños fortuitos o consecuentes, por lo que es posible que la
limitación mencionada anteriormente no sea aplicable a su caso. A EXCEPCIÓN DE
LO PERMITIDO POR LA LEGISLACIÓN LOCAL, LAS CONDICIONES DE ESTA GARANTÍA
NO EXCLUYEN, RESTRINGEN NI MODIFICAN LOS DERECHOS LEGALES PRECEPTIVOS
APLICABLES A LA LICENCIA DE CUALQUIER SOFTWARE PROPORCIONADO CON EL
PRODUCTO, NI TAMPOCO SE AÑADEN A ESTOS. La Convención de las Naciones
Unidas sobre la Venta internacional de productos no se aplicará a ninguna
transacción relacionada con la comercialización de los Productos.
17
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Français
Déploiement classique
Bullet PicoStation
NanoStationloco
NanoStation
2
Adresse IP
par défaut
192.168.1.20
Port Ethernet sur
Périphérique Ubiquiti
à Port Ethernet
étiqueté POE sur
Adaptateur PoE
POE
LAN
Branchez le cordon
d'alimentation à
l'Adaptateur PoE et à
une prise de courant
LAN ou Ordinateur à
Port Ethernet étiqueté
LAN sur Adaptateur PoE
Adresse IP de l'ordinateur
192.168.1.x
Remarque : les câbles de catégorie 5 (ou supérieure)
blindés doivent être utilisés pour toutes les connexions
câblées Ethernet et doivent être mis à la terre via le CA
du PoE.
CONDITIONS D'UTILISATION : Les périphériques radio Ubiquiti doivent être installés par un
professionnel. L'utilisation de câbles Ethernet blindés et la mise à la terre sont obligatoires. Toute
omission à cet égard entraînera l'annulation de la garantie du produit. TOUGHCable est conçu pour les
installations extérieures. Il incombe au client de se conformer à la réglementation en vigueur dans son
pays, notamment en n'utilisant que les canaux de fréquence autorisés et en respectant les critères de
puissance de sortie et de sélection dynamique de fréquence (DFS).
18
Accès à airOS
Accès à airOS
1. Assurez-vous que votre machine hôte est connectée via
Ethernet au périphérique Ubiquiti Networks (voir la page
précédente).
2. Configurez l'adaptateur Ethernet sur votre machine hôte avec
une adresse IP statique sur le sous-réseau 192.168.1.x
(ex. : 192.168.1.100).
3. Lancez votre navigateur Web et tapez https://192.168.1.20
dans le champ d'adresse, puis appuyez sur Entrée (PC) ou
Retour (Mac).
4. Saisissez « ubnt » dans les champs Username (nom
d'utilisateur) et Password (mot de passe). Choisissez votre pays
dans la liste déroulante Country (pays). Vous devez accepter les
conditions d'utilisation pour pouvoir utiliser le produit. Pour ce
faire, cliquez sur I agree to these terms of use (J'accepte les
conditions d'utilisation). Cliquez sur Login (Connexion).
Remarque : Choisissez dans la liste déroulante Country
(pays) le pays dans lequel le produit est utilisé.
L'interface airOS s'affichera, ce qui vous permettra de
personnaliser vos paramètres à votre guise.
19
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Responsabilité de conformité de l'utilisateur
Le matériel doit être installé par un professionnel. Il incombe à
cet installateur de garantir la conformité de fonctionnement du
matériel aux exigences réglementaires du pays dans lequel il est
installé.
Le matériel d'Ubiquiti Networks pouvant être utilisé avec une
diversité d'antennes et de câbles, les champs Antenna Gain (gain
d'antenne), Cable Loss (affaiblissement du câble) et Output Power
(puissance de sortie) sont fournis à l'installateur pour l'aider à
respecter les exigences réglementaires.
Remarque : Pour les pays de l'UE, le programme
d'installation est nécessaire pour assurer le bon
fonctionnement de radio dans les limites réglementaires
PIRE. Pour l'UE, la limite maximale de pire pour
un fonctionnement à 2,4 GHz est 20dBm. Pour le
fonctionnement de 5 GHz, la PIRE maximale est de 30dBm.
20
Garantie limitée
Garantie limitée
UBIQUITI NETWORKS, Inc (« UBIQUITI NETWORKS ») garantit que le ou les
produits fournis dans le cadre des présentes (ci-après le « Produit » ou les
« Produits ») seront dépourvus de tout vice matériel ou de fabrication pendant
une période d'un (1) an à compter de la date de livraison par UBIQUITI
NETWORKS, dans des conditions normales d'utilisation et d'exploitation.
L'obligation exclusive d'UBIQUITI NETWORKS et sa seule responsabilité dans le
cadre de la présente garantie consistera à réparer ou remplacer, à sa discrétion,
tout Produit non conforme à la garantie ci-définie pendant la période
susmentionnée. La présente garantie ne couvre pas les frais d'enlèvement et de
réinstallation de tout Produit. La période de garantie de tout Produit réparé ou
remplacé ne sera pas prolongée au delà du terme d'origine.
Conditions de garantie
La garantie susmentionnée est nulle est non avenue si le Produit a été :
(I)
modifié ou altéré (notamment par le biais d'un ajout) par des personnes
autres qu'un agent d'UBIQUITI NETWORKS ou ses représentants autorisés
ou qui ont été approuvés par UBIQUITI NETWORKS par écrit ;
(II)
repeint ou a subi une modification du logo ou toute autre altération
physique ;
(III) endommagé suite à une erreur de branchement ou à une défaillance des
câbles ;
(IV) soumis à un usage inadapté ou abusif, une négligence ou une contrainte
physique, électrique ou électromagnétique inhabituelle, notamment la
foudre, ou tout autre type d'accident ;
(V) endommagé suite à l'utilisation du micrologiciel d'une tierce partie ;
(VI) reçu par UBIQUITI NETWORKS sans l'étiquette d'origine où figure le
numéro MAC Ubiquiti ou toute autre étiquette d'origine Ubiquiti (qu'elle
ait été perdue ou qu'elle ne figurait pas sur le produit au moment de
l'achat).
(VII) livré dans les locaux d'UBIQUITI NETWORKS plus de 30 jours après
l'émission du numéro de retour de matériel (RMA).
En outre, la garantie susmentionnée s'applique uniquement dans la mesure où :
le Produit a été correctement installé et utilisé à tout moment conformément
à la documentation Produit applicable, en ce qui concerne tous les aspects
matériels ; tous les câblages Ethernet utilisent des câbles CAT5 (ou catégorie
supérieure), les câblages en extérieur sont effectués à l'aide de câbles blindés et
tous les critères de câblage spécifiques sont respectés pour les installations en
intérieur.
21
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Retours
Aucun Produit ne sera accepté pour remplacement ou réparation sans qu'un
numéro d'autorisation de retour de matériel (Return Materials Authorization RMA) n'ait été attribué par UBIQUITI NETWORKS pendant la période de garantie.
Les Produits doivent être envoyés à UBIQUITI NETWORKS en fret prépayé,
conformément à la procédure de retour de matériel d'UBIQUITI NETWORKS. Les
Produits retournés sans numéro RMA ne seront pas traités et seront renvoyés
en port dû ou mis au rebut. Pour plus d'informations sur le retour de matériel et
l'obtention d'un numéro RMA, rendez-vous à la page suivante :
www.ubnt.com/support/warranty.
Clause de non-responsabilité
EN DEHORS DES GARANTIES EXPRESSÉMENT STIPULÉES PAR LES PRÉSENTES,
UBIQUITI NETWORKS, SES FILIALES, AINSI QUE LEURS FOURNISSEURS TIERS DE
DONNÉES, SERVICES, LOGICIELS ET ÉQUIPEMENTS MATÉRIELS N'ACCORDENT
AUCUNE GARANTIE, EXPRESSE, TACITE OU LÉGALE, NOTAMMENT, MAIS SANS
S'Y LIMITER, TOUTE GARANTIE DE QUALITÉ MARCHANDE, EXACTITUDE,
QUALITÉ DE SERVICE OU DE RÉSULTATS, DISPONIBILITÉ, QUALITÉ
SATISFAISANTE, ABSENCE DE VIRUS, JOUISSANCE PAISIBLE, ADÉQUATION À
UN USAGE PARTICULIER ET ABSENCE DE CONTREFAÇON, AINSI QUE TOUTE
GARANTIE DÉCOULANT DE TOUTE CONDUITE, OU TOUT USAGE OU PRATIQUE
COMMERCIALE EN RAPPORT AVEC LESDITS PRODUITS ET SERVICES. L'ACHETEUR
RECONNAÎT QUE NI UBIQUITI NETWORKS NI SES FOURNISSEURS TIERS N'ONT
DE CONTRÔLE SUR SON PROPRE ÉQUIPEMENT OU SUR LE TRANSFERT DE
DONNÉES VIA LES MOYENS DE COMMUNICATION, Y COMPRIS L'INTERNET, ET
QUE LES PRODUITS ET SERVICES PEUVENT ÊTRE SOUMIS À DES RESTRICTIONS,
INTERRUPTIONS, RETARDS, ANNULATIONS ET AUTRES PROBLÈMES INHÉRENTS
À L'UTILISATION DES INFRASTRUCTURES DE COMMUNICATION. UBIQUITI
NETWORKS, SES FILIALES ET LEURS FOURNISSEURS TIERS NE SAURAIENT ÊTRE
TENUS RESPONSABLES DE TOUTE INTERRUPTION, ANNULATION, PERTE OU
CORRUPTION DE DONNÉES, PERTE DE PAQUETS, OU TOUT RETARD, ÉCHEC DE
LIVRAISON OU AUTRE DOMMAGE RÉSULTANT DE TOUTES LES ÉVENTUALITÉS
SUS-MENTIONNÉES. En outre, UBIQUITI NETWORKS ne garantit pas que les
Produits soient exempts d'erreurs et qu'ils fonctionneront sans interruption.
UBIQUITI NETWORKS se dégage de toute responsabilité en cas de plaintes
ou de dommages, de toute nature ou description, liés aux performances du
système, notamment la couverture, la sélection de produits par l'acheteur (dont
les Produits) pour son application et/ou la non-conformité des produits (dont
les Produits) aux exigences gouvernementales ou réglementaires.
22
Garantie limitée
Limites de responsabilité
SAUF SI LA LÉGISLATION LOCALE L'INTERDIT, UBIQUITI, SES SOCIÉTÉS
AFFILIÉES, SES FILIALES OU SES FOURNISSEURS NE SAURAIENT ÊTRE TENUS
POUR RESPONSABLES DES DOMMAGES DIRECTS, SPÉCIAUX, ACCESSOIRES,
CONSÉCUTIFS OU AUTRES DOMMAGES ET INTÉRÊTS (Y COMPRIS LA PERTE
DE PROFITS OU DE DONNÉES, OU LES COÛTS D'INDISPONIBILITÉ), RÉSULTANT
DE L'UTILISATION, DE L'INCAPACITÉ À UTILISER, OU DES RÉSULTATS DE
L'UTILISATION DU PRODUIT, QUE CE SOIT AU TITRE DE LA GARANTIE,
RESPONSABILITÉ CONTRACTUELLE OU DÉLICTUELLE, OU TOUT AUTRE TYPE DE
RESPONSABILITÉ, QUE LESDITES SOCIÉTÉS AIENT ÉTÉ OU NON INFORMÉES DE
LA POSSIBILITÉ DE TELS DOMMAGES.
Remarque
Certains pays, États et provinces n'autorisant pas l'exclusion des garanties ou
conditions tacites, les exclusions susmentionnées peuvent ne pas s'appliquer
à votre cas. Vous disposez peut-être d'autres droits, en fonction de votre
pays, État ou province. Certains États, pays et provinces ne reconnaissent pas
les exclusions ou les limitations de responsabilité à l'égard des dommages
consécutifs ou accessoires. Les limitations susmentionnées peuvent donc ne
pas vous être applicables. SAUF SI LA LÉGISLATION LOCALE L'AUTORISE, LES
PRÉSENTES CLAUSES DE GARANTIE N'EXCLUENT, NE LIMITENT NI NE MODIFIENT
VOS DROITS LÉGAUX EU ÉGARD À LA LICENCE DE TOUT LOGICIEL (INTÉGRÉ
DANS LE PRODUIT) ET S'AJOUTENT AUXDITS DROITS. La Convention des
Nations Unies sur les contrats de vente internationale de marchandises ne régit
pas les transactions liées à la vente des Produits.
23
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Italiano
Implementazione tipica
Bullet PicoStation
NanoStationloco
NanoStation
2
Indirizzo IP
predefinito
192.168.1.20
Porta Ethernet sul
dispositivo Ubiquiti
collegato alla porta
Ethernet con etichetta
POE sull'adattatore PoE
POE
LAN
Collegare il cavo
di alimentazione
all'adattatore PoE e alla
presa a muro
LAN o computer
collegati alla porta
Ethernet con etichetta
LAN sull'adattatore PoE
Indirizzo IP del computer
192.168.1.x
Nota: i cavi schermati di categoria 5 (o superiore)
devono essere utilizzati per tutte le connessioni
Ethernet e collegati all'alimentatore PoE di corrente
alternata con messa a terra.
TERMINI DI UTILIZZO: I dispositivi radio Ubiquiti devono essere installati in modo professionale. Ai
fini della garanzia, è necessario utilizzare un cavo Ethernet schermato e la presa a terra. Il prodotto
TOUGHCable è stato progettato per le installazioni esterne. È responsabilità del cliente osservare le
normative locali, incluso il funzionamento nel rispetto dei canali di frequenza legale, della potenza di
output e dei requisiti di selezione dinamica della frequenza (DFS).
24
Accesso ad airOS
Accesso ad airOS
1. Verificare che la macchina host sia collegata via Ethernet al
dispositivo Ubiquiti Networks (come illustrato nella pagina
precedente).
2. Configurare l'adattatore Ethernet sul sistema host con un
indirizzo IP statico sulla subnet 192.168.1.x (es. 192.168.1.100).
3. Avviare il browser Web e digitare https://192.168.1.20 nel
campo degli indirizzi e premere Invio (PC) o Return (Mac).
4. Inserire "ubnt" nei campi "Username" (Nome utente) e
"Password". Selezionare il proprio paese dall'elenco a discesa
"Country" (Paese). Per usare il prodotto, è necessario prima
accettare i termini di utilizzo. Per accettare, fare clic su "I agree
to these terms of use" (Accetto questi termini di utilizzo). Fare
clic su "Login" (Accesso).
Nota: È necessario selezionare il paese di utilizzo del
prodotto dall'elenco a discesa dei codici paese.
Viene visualizzata l'interfaccia airOS che consente di
personalizzare le impostazioni in base alle esigenze.
25
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Conformità alle normative del professionista
all'installazione
Ciascun dispositivo deve essere installato da un professionista
ed è responsabilità dell'addetto all'installazione assicurarsi che il
dispositivo venga utilizzato in conformità alle normative locali.
I dispositivi Ubiquiti Networks possono essere collegati a un'ampia
varietà di modelli di antenne e cavi, pertanto i campi "Antenna
Gain" (Amplificazione), "Cable Loss" (Perdita da cavo) e "Output
Power" (Potenza di trasmissione) forniscono un'indicazione dei
requisiti normativi di riferimento per il professionista addetto
all'installazione.
Nota : Per i paesi UE, l'installatore è tenuto a garantire il
funzionamento radio entro i limiti normativi EIRP. Per l'UE,
il limite massimo di EIRP per il funzionamento a 2,4 GHz è
20 dBm. Per il funzionamento 5 GHz, il massimo 30 dBm
EIRP è.
26
Garanzia limitata
Garanzia limitata
UBIQUITI NETWORKS, Inc ("UBIQUITI NETWORKS") garantisce che i prodotti
forniti ai sensi del presente documento ("Prodotto/i") sono esenti da difetti
di materiale e di fabbricazione per un periodo di un (1) anno dalla data di
spedizione da parte di UBIQUITI NETWORKS in condizioni normali di utilizzo
e funzionamento. L'obbligo e la responsabilità unici ed esclusivi di UBIQUITI
NETWORKS in base alla suddetta garanzia sono rappresentati dalla riparazione
o dalla sostituzione, a sua discrezione, di qualsiasi Prodotto difettoso o
malfunzionante durante il periodo di garanzia. Le spese di rimozione o
reinstallazione di qualsiasi Prodotto non sono incluse nella presente garanzia. Il
periodo di garanzia per ogni prodotto riparato o sostituito non si estende al di
là del termine originale.
Condizioni di garanzia
La suddetta garanzia non sia applica nei seguenti casi:
(I)
sono state apportate modifiche, alterazioni o aggiunte al Prodotto, tranne
in caso di modifiche, alterazioni o aggiunte eseguite da Ubiquiti Networks
o da rappresentanti autorizzati Ubiquiti Networks o in altro modo
approvate da Ubiquiti Networks per iscritto;
(II)
il Prodotto è stato dipinto, sottoposto a un cambio di marchio o
modificato in qualsiasi modo;
(III) il Prodotto è stato danneggiato a causa di errori o difetti di cablaggio;
(IV) il Prodotto è stato soggetto a uso improprio, abuso, negligenza, tensione
fisica, elettrica o elettromagnetica, inclusi scariche di fulmini o incidenti;
(V) il Prodotto è stato danneggiato o compromesso in seguito all'utilizzo di
firmware di terze parti; o qualora
(VI) il Prodotto non presenta l'etichetta originale Ubiquiti MAC o qualsiasi altra
etichetta originale Ubiquiti;
(VII) il Prodotto non è stato ricevuto da Ubiquiti entro 30 giorni dalla data di
emissione dell'RMA.
Inoltre, la suddetta garanzia si applica solo se: il Prodotto è stato installato
correttamente e utilizzato sempre in conformità, e nel rispetto di tutti i materiali,
alla documentazione del Prodotto applicabile;tutti i cavi Ethernet utilizzano
un'opzione di cablaggio schermata CAT5 (o superiore); vengono utilizzati cavi
schermati Ethernet per le installazioni esterne e vengono osservati i requisiti di
cablaggio interno per le installazioni interne.
Resi
Non sarà accettato alcun Prodotto per la sostituzione o la riparazione senza
l'assegnazione di un numero RMA (Return Materials Authorization) da UBIQUITI
NETWORKS durante il periodo di garanzia. Inoltre, i Prodotti devono essere
restituiti tramite spedizione prepagata nella struttura di UBIQUITI NETWORKS
conformemente alla procedura RMA stabilita da UBIQUITI NETWORKS. I Prodotti
restituiti senza un numero RMA non saranno elaborati e verranno restituiti con
spese di spedizione a carico del destinatario o smaltiti. Per informazioni sulla
procedura RMA e sull'assegnazione di un numero RMA consultare il sito Web:
www.ubnt.com/support/warranty.
27
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Esclusione di responsabilità
FATTA ECCEZIONE PER TUTTE LE GARANZIE ESPLICITE SPECIFICATE NEL
PRESENTE DOCUMENTO, UBIQUITI NETWORKS, LE SUE SOCIETÀ AFFILIATE
E I RELATIVI FORNITORI TERZI DI DATI, SERVIZI, SOFTWARE E HARDWARE
DECLINANO OGNI RESPONSABILITÀ O GARANZIA DI QUALSIASI TIPO,
ESPLICITA, IMPLICITA O LEGALE, INCLUSE, SENZA LIMITAZIONI, GARANZIE,
DICHIARAZIONI O GARANZIE DI COMMERCIABILITÀ, PRECISIONE, QUALITÀ DI
SERVIZIO O RISULTATI, DISPONIBILITÀ, QUALITÀ SODDISFACENTE, MANCANZA
DI VIRUS, PACIFICO GODIMENTO, IDONEITÀ PER UNO SCOPO SPECIFICO
E NON INFRAZIONE, E QUALSIASI GARANZIA RELATIVA A TRATTATIVE O
CONSUETUDINI COMMERCIALI NELL’AMBITO DI TALI PRODOTTI E SERVIZI.
L'ACQUIRENTE RICONOSCE CHE NÉ UBIQUITI NETWORK NÉ I SUOI FORNITORI
TERZI CONTROLLANO I DISPOSITIVI DELL'ACQUIRENTE O I SUOI DATI TRAMITE
SERVIZI DI COMUNICAZIONE QUALI INTERNET, E CHE I PRODOTTI E I SERVIZI
POSSONO ESSERE SOGGETTI A LIMITAZIONI, INTERRUZIONI, RITARDI,
CANCELLAZIONI O ALTRI PROBLEMI INERENTI ALL'UTILIZZO DEGLI STRUMENTI
DI COMUNICAZIONE. UBIQUITI NETWORKS, LE SUE SOCIETÀ AFFILIATE E I
RELATIVI FORNITORI TERZI NON SONO RESPONSABILI PER INTERRUZIONI,
RITARDI, CANCELLAZIONI, ERRORI DI CONSEGNA, PERDITA DI DATI, DANNI
AL CONTENUTO, PERDITA DI PACCHETTI O ALTRI DANNI RISULTANTI DA
QUANTO SOPRA SPECIFICATO. Inoltre, UBIQUITI NETWORKS non garantisce
il funzionamento corretto dei Prodotti o che tale funzionamento non venga
interrotto. In nessun caso UBIQUITI NETWORKS sarà responsabile di danni
o richieste di qualsiasi natura o della descrizione relativa alle prestazioni del
sistema, inclusa la copertina, la selezione di prodotti (inclusi i Prodotti) da parte
dell'Acquirente per l'uso da parte dell'Acquirente e/o della mancata conformità
dei prodotti (inclusi i Prodotti) ai requisiti governativi o normativi.
Limitazione di responsabilità
FATTA ECCEZIONE PER QUANTO PROIBITO DALLE LEGGI LOCALI, UBIQUITI, LE
SUE SOCIETÀ AFFILIATE O I SUOI FORNITORI NON SARANNO IN ALCUN CASO,
RESPONSABILI PER DANNI DIRETTI, SPECIALI, INDIRETTI, CONSEGUENTI O DI
ALTRO TIPO (INCLUSI LA PERDITA DI PROFITTI E DATI O I COSTI DI INATTIVITÀ)
DERIVANTI DALL'USO, DALL'IMPOSSIBILITÀ DI UTILIZZO O DAI RISULTATI DI
UTILIZZO DEL PRODOTTO, BASATI SU GARANZIA, CONTRATTO, TORTO O ALTRA
TEORIA LEGALE, SIA O MENO UBIQUITI INFORMATA DELLA POSSIBILITÀ DI TALI
DANNI.
Nota
Alcuni paesi, Stati e province non ammettono l'esclusione di garanzie o
condizioni implicite, pertanto la suddetta esclusione potrebbe non applicarsi
al caso specifico. L'utente potrebbe godere di altri diritti legali variabili da
paese a paese, provincia a provincia e Stato a stato. Alcuni paesi, Stati e
province non consentono l'esclusione o la limitazione di responsabilità per
danni diretti o indiretti; in tal caso la limitazione sopra esposta potrebbe
non essere applicabile. SALVO NEI LIMITI CONSENTITI DALLE LEGGI LOCALI, I
PRESENTI TERMINI DI GARANZIA NON ESCLUDONO, LIMITANO O MODIFICANO,
E SI INTEGRANO AI DIRITTI LEGALI OBBLIGATORI APPLICABILI ALLA LICENZA
DI QUALSIASI SOFTWARE (INCORPORATO NEL PRODOTTO) CONCESSA
ALL'UTENTE. La Convenzione sulla Vendita Internazionale di Beni delle Nazioni
Unite non si applica ad alcuna transazione associata alla vendita dei Prodotti.
28
FCC
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operations of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
For MPE and antenna usage details, please visit our website at
www.ubnt.com/products
Industry Canada
(BulletM/PicoStationM)
This Class A digital apparatus complies with Canadian ICES-003.
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne
et son gain doivent être choisies de façon que la puissance isotrope
rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une
communication réussie.
Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence
norme(s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne peut pas provoquer d’interférences et
2. Cet appareil doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
29
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Industry Canada
(NanoStationM/NanoStationlocoM)
This Class A digital apparatus complies with Canadian ICES-003.
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
This device has been designed to operate with the antennas listed below, and
having a maximum gain of 25 dBi*. Antennas not included in this list or having
a gain greater than 25 dBi are strictly prohibited for use with this device. The
required antenna impedance is 50 ohms.
* Model: NanoStation antenna gain is 25 dBi.
The maximum antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and the
maximum antenna gain permitted for devices in the band 5725‑5825 MHz shall
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point
operation as appropriate.
Users should also be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause interference and/or damage
to LE-LAN devices.
30
Industry Canada (NanoStationM/NanoStationlocoM)
Cet appareil numérique de la classe A est conforme à la norme NMB-003
Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne
et son gain doivent être choisies de façon que la puissance isotrope
rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une
communication réussie.
Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence
norme(s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne peut pas provoquer d’interférences et
2. Cet appareil doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
Cet appareil a été conçu pour fonctionner avec les antennes énumérés cidessous, et ayant un gain maximal de 25 dBi*. Antennes pas inclus dans cette
liste ou ayant un gain supérieur à 25 dBi sont strictement interdite pour une
utilisation avec cet appareil. L'impédance d'antenne requise est 50 ohms.
* Modèle: NanoStation gain d'antenne 25 dBi est.
Le gain maximal d'antenne permis pour les dispositifs utilisant les bandes 5 2505 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; le gain
maximal d'antenne permis (pour les dispositifs utilisant la bande 5 725-5 825
MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l'exploitation point à
point et non point à point, selon le cas.
Les utilisateurs devraient aussi être avisés que les utilisateurs de radars de
haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
31
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
RF Exposure Warning
The antennas used for this transmitter must be installed to provide a separation
distance of at least 2.52 m from all persons and must not be located or
operating in conjunction with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en considérant
une distance de séparation de toute personnes d’au moins 2.52 m et ne doivent
pas être localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.
CE Marking
CE marking on this product represents the product is in compliance with all
directives that are applicable to it.
Alert Sign (!) Follows CE Marking
Alert sign must be indicated if a restriction on use applied to the product and it
must follow the CE marking.
32
RoHS/WEEE Compliance Statement
RoHS/WEEE Compliance Statement
English
European Directive 2002/96/EC requires that the equipment bearing this
symbol on the product and/or its packaging must not be disposed of with
unsorted municipal waste. The symbol indicates that this product should
be disposed of separately from regular household waste streams. It is your
responsibility to dispose of this and other electric and electronic equipment
via designated collection facilities appointed by the government or local
authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed
information about the disposal of your old equipment, please contact your
local authorities, waste disposal service, or the shop where you purchased the
product.
Deutsch
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung,
die direkt am Gerät und/oder an der Verpackung mit diesem Symbol
versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt
werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem
Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung,
dieses Gerät und andere elektrische und elektronische Geräte über die dafür
zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten
Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln
trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche
Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung
Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt
erworben haben.
Español
La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo
en el propio aparato y/o en su embalaje no deben eliminarse junto con otros
residuos urbanos no seleccionados. El símbolo indica que el producto en
cuestión debe separarse de los residuos domésticos convencionales con
vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera
otros aparatos eléctricos y electrónicos a través de los puntos de recogida que
ponen a su disposición el gobierno y las autoridades locales. Al desechar y
reciclar correctamente estos aparatos estará contribuyendo a evitar posibles
consecuencias negativas para el medio ambiente y la salud de las personas.
Si desea obtener información más detallada sobre la eliminación segura de
su aparato usado, consulte a las autoridades locales, al servicio de recogida y
eliminación de residuos de su zona o pregunte en la tienda donde adquirió el
producto.
33
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Français
La directive européenne 2002/96/CE exige que l’équipement sur lequel est
apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les
autres ordures ménagères. Ce symbole indique que le produit doit être éliminé
dans un circuit distinct de celui pour les déchets des ménages. Il est de votre
responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou
électronique par les moyens de collecte indiqués par le gouvernement et les
pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en
bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel
de ce type de produits sur l’environnement et la santé publique. Pour plus
d’informations sur le mode d’élimination de votre ancien équipement, veuillez
prendre contact avec les pouvoirs publics locaux, le service de traitement des
déchets, ou l’endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate
con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite
insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto
non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità
del proprietario smaltire sia questi prodotti sia le altre apparecchiature
elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate
dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio
aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente
e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa
lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo
a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il
negozio nel quale avete acquistato il prodotto.
34
Declaration of Conformity
Declaration of Conformity
Česky
[Czech]
UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI
NETWORKS device, je ve shod se základními po adavky a dal ími p
íslu n mi ustanoveními sm rnice 1999/5/ES.
Dansk
[Danish]
Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende
udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav
og øvrige relevante krav i direktiv 1999/5/EF.
Nederlands
[Dutch]
Hierbij verklaart UBIQUITI NETWORKS dat het toestel UBIQUITI
NETWORKS device, in overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 1999/5/EG.
Bij deze verklaart UBIQUITI NETWORKS dat deze UBIQUITI
NETWORKS device, voldoet aan de essentiële eisen en aan de
overige relevante bepalingen van Richtlijn 1999/5/EC.
English
Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI
NETWORKS device, is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Eesti
[Estonian]
Käesolevaga kinnitab UBIQUITI NETWORKS seadme UBIQUITI
NETWORKS device, vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Suomi
[Finnish]
UBIQUITI NETWORKS vakuuttaa täten että UBIQUITI NETWORKS
device, tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Français
[French]
Par la présente UBIQUITI NETWORKS déclare que l’appareil
UBIQUITI NETWORKS, device est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Deutsch
[German]
Hiermit erklärt UBIQUITI NETWORKS, dass sich diese UBIQUITI
NETWORKS device, in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet”. (BMWi)
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ UBIQUITI NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ UBIQUITI
NETWORKS device, ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1995/5/ΕΚ.
Magyar
[Hungarian]
Alulírott, UBIQUITI NETWORKS nyilatkozom, hogy a
UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Íslenska
[Icelandic]
Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS
device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í
tilskipun 1999/5/EC.
Italiano
[Italian]
Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI
NETWORKS device, è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
35
Bullet™M/PicoStation™M/NanoStation™M/NanoStationloco™M
Latviski
[Latvian]
Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device,
atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist
tajiem noteikumiem.
Lietuviškai
[Lithuanian]
UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS
įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Malti
[Maltese]
Hawnhekk, UBIQUITI NETWORKS, jiddikjara li dan UBIQUITI
NETWORKS device, jikkonforma mal- ti ijiet essenzjali u ma
provvedimenti o rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Norsk
[Norwegian]
UBIQUITI NETWORKS erklærer herved at utstyret UBIQUITI
NETWORKS device, er i samsvar med de grunnleggende krav og
øvrige relevante krav i direktiv 1999/5/EF.
Slovensky
[Slovak]
UBIQUITI NETWORKS t mto vyhlasuje, e UBIQUITI NETWORKS
device, sp a základné po iadavky a v etky príslu né ustanovenia
Smernice 1999/5/ES.
Svenska
[Swedish]
Härmed intygar UBIQUITI NETWORKS att denna UBIQUITI
NETWORKS device, står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Español
[Spanish]
Por medio de la presente UBIQUITI NETWORKS declara que el
UBIQUITI NETWORKS device, cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Polski
[Polish]
Niniejszym, firma UBIQUITI NETWORKS o wiadcza, e produkt serii
UBIQUITI NETWORKS device, spełnia zasadnicze wymagania i inne
istotne postanowienia Dyrektywy 1999/5/EC.
Português
[Portuguese]
UBIQUITI NETWORKS declara que este UBIQUITI NETWORKS device,
está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Română
[Romanian]
Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv
UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și
alte prevederi relevante ale Directivei 1999/5/CE.
JL053113
36
Support support.ubnt.com
Community community.ubnt.com
Downloads downloads.ubnt.com
www.ubnt.com
© 2011-2013 Ubiquiti Networks, Inc. All rights reserved.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement