Panasonic | SC-BTT490 | Owner`s manual | Panasonic SC-BTT490

SC-BTT490P_eng.book 1 ページ
2012年2月22日 水曜日 午前9時1分
Owner’s Manual
Blu-ray DiscTM Home Theater Sound System
Model No. SC-BTT490
Unless otherwise indicated, illustrations in this Owner’s Manual are of SC-BTT490 for U.S.A.
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
P
PC
PX
VQT3X49-3
until
2012/03/07
SC-BTT490P_eng.book 2 ページ
2012年2月22日 水曜日 午前9時1分
Getting started
CAUTION
Unit
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy
for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles,
on this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Speaker
≥ Use only supplied speakers
The main unit and supplied speakers are to be used only as
indicated in this Owner’s Manual. Failure to do so may lead to
damage to the amplifier and/or the speakers, and may result in
the risk of fire. Consult a qualified service person if damage has
occurred or if you experience a sudden change in performance.
≥ Be careful not to cross (short-circuit) or reverse the polarity of
the speaker wires as doing so may damage the speakers.
≥ Do not hold the speaker in one hand to avoid injury by dropping
the speaker when carrying.
≥ You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
≥ Do not touch the front netted area of the speakers. Hold by the
sides.
≥ When carrying speakers, hold the stand and base parts.
≥ Place speakers on flat, secure surfaces.
≥ To avoid injury by falling or dropping the speaker, place the
speaker cables with care not to stumble or hook.
≥ Do not stand on the base for the speaker. Be cautious when
children are near.
Batteries
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this
unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
AC power supply cord
≥ Install this unit so that the power cord can be unplugged from
the socket outlet immediately if any problem occurs.
Small object
≥ Keep the Memory Card out of reach of children to prevent
swallowing.
≥ Keep the screws out of reach of children to prevent swallowing.
2
VQT3X49
(Inside of product)
SC-BTT490P_eng.book 3 ページ
2012年2月22日 水曜日 午前9時1分
Table of contents
Getting started
TV & Radio
Package contents and accessories ................ 4
Unit and media care ........................................ 5
Playable media ............................................... 6
Control reference guide .................................. 8
VIERA LinkTM
“HDAVI ControlTM” ..........................................27
Inserting or removing media ......................... 20
Enjoying TV with unit’s speakers .................. 20
HOME menu ................................................. 21
Multi User Mode ............................................ 22
Enjoying Network Service
(NETFLIX, etc.) ..............................................30
Home Network feature ...................................31
Option menu ..................................................32
Setup menu ...................................................35
•Speaker settings .................................................. 40
Enjoying sound effects from all speakers ......41
Speaker installation option .............................42
Playback
Reference
Playback ....................................................... 23
Using the iPod/iPhone .................................. 25
Troubleshooting guide ...................................44
Messages ......................................................47
Specifications .................................................49
Supplemental information ..............................50
Limited Warranty ............................................54
Index ................................................ Back cover
•iPod/iPhone Connection ....................................... 26
•iPod/iPhone Playback .......................................... 26
Playback
Advanced operations
Reference
Precautions of Wireless LAN connection
The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage which may arise due to a failure
to obey these limits, or to any condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be intercepted and monitored.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and follow the following points:
jDo not expose this unit to high temperatures or direct sunlight.
jDo not bend, or subject this unit to strong impacts.
jKeep this unit away from moisture.
jDo not disassemble or alter this unit in any way.
≥ Restriction on use of unauthorized copied content (> 50)
≥ Please note that the actual controls and components, menu items, etc. may look somewhat different from those shown in the
illustrations in this Owner's Manual.
VQT3X49
TV & Radio
•Easy Setting ......................................................... 18
•Easy Network Setting ........................................... 18
•Firmware updates ................................................ 19
Listening to the Radio .................................... 29
Advanced
operations
STEP 1: Positioning ...................................... 10
STEP 2: Preparing the speakers .................. 11
STEP 3: Connections .................................... 13
STEP 4: Connecting to an AC power source .... 17
STEP 5: Settings ........................................... 18
•Enjoying TV and STB with unit’s speakers .......... 28
Getting started
IMPORTANT SAFETY INSTRUCTIONS ........ 2
3
SC-BTT490P_eng.book 4 ページ
2012年2月22日 水曜日 午前9時1分
Package contents and accessories
Getting started
Check the package contents and supplied accessories before using this unit.
Package contents
Main unit
(SA-BTT490)
FRONT
(SB-HF490)
CENTER
(SB-HC490)
SURROUND
(SB-HS290)
(Speakers)
(Speaker cable)
(Stands)
(Bases)
(Screws)
Parts
Stands (with cables)
Parts number
RYP1714B-K: RED
RYP1714A-K: WHITE
Bases
RYP1745-K k 2
Screws
XSN5i12FJKk 8
Speaker cables
REEX1268: GREEN
REEX1269: GRAY
REEX1270: BLUE
4
VQT3X49
SUBWOOFER
(SB-HW490)
SC-BTT490P_eng.book 5 ページ
2012年2月22日 水曜日 午前9時1分
Accessories
1 Remote control
∏
(N2QAYB000727)
∏
∏
1 AC power supply cord
For the U.S.A. and Canada
(K2CB2CB00021)
For units with PX printed
on the packaging
(K2CQ2CA00007)
2 Batteries for
remote control
∏
1 FM indoor
antenna
∏
1 Sheet of speaker
cable sticker
Getting started
∏
(RSAX0002)
1 AC plug adaptor
For units with PX printed on
the packaging
(K2DAYYY00002)
≥ Product numbers provided in this Owner’s Manual correct as of January 2012. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
[For_Canada]
≥ The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
Unit and media care
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ This unit’s lens
≥ Use the lens cleaner (not supplied) to clean the
unit’s lens.
∫ Clean discs
DO
DO NOT
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling
precautions
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal
or transfer, then follow the procedure to return all
the settings to the factory presets to delete the
user settings. (> 44, “To return all settings to the
factory preset.”)
The operation history may be recorded in the
memory of this unit.
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
VQT3X49
5
SC-BTT490P_eng.book 6 ページ
2012年2月22日 水曜日 午前9時1分
Playable media
Type
Logo examples
Type detail
BD-Video
BD-RE
BD
BD-R
DVD-Video
Playable contents
Video
Video, JPEG, MPO
Video, MKV
Video
DVD-R
Video, AVCHD, MKV, JPEG,
MPO, FLAC, MP3, WAV
DVD
DVD-R DL
DVD-RW
—
+R/+RW/+R DL
Music CD
CD
—
CD-R
CD-RW
Music [CD-DA]
MKV, JPEG,
MPO, FLAC, MP3,
Music [CD-DA], WAV
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB) AVCHD, AVCHD 3D, MP4,
SDXC Memory Card (48 GB, 64 GB) MPEG2, JPEG, MPO
(Compatible with both mini and micro types)
SD
USB
Video, AVCHD
—
USB devices
(up to 2 TB)
MP4, MPEG, MKV, JPEG,
MPO, FLAC, MP3, WAV
≥ See pages 7 and 50 for more information on the types of content that can be played.
6
VQT3X49
2012年2月22日 水曜日 午前9時1分
∫ Discs that cannot be played in
this unit
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ All types of DivX discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/
sec
∫ Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
Example:
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
Example:
1
ALL
1
2
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder, etc. needs to be finalized
by the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby
Digital Plus, Dolby TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
≥ 2D video can be enjoyed as 3D virtually. (> 35)
∫ Music CD
≥ Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
∫ SD card
≥ miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
but must be used with an adaptor
card. These are usually supplied
with such cards, or otherwise
customer provided.
≥ To protect the card’s contents, move the record
prevention tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory Cards
in FAT32 format and SDXC Memory Cards in
exFAT.
≥ If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥ Useable memory may be slightly less than the
card capacity.
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16, FAT32 and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized the
power to the HDD may not be supplied. Supply
power from an external source.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
VQT3X49
7
Getting started
SC-BTT490P_eng.book 7 ページ
SC-BTT490P_eng.book 8 ページ
2012年2月22日 水曜日 午前9時1分
Control reference guide
1
2
Remote control
13
リワヱヶヵ
モヷ
1
2
3
4
14
ュリヴヤ
ㄊヱㄐㄅ
ヴユモンヤラ
ヱロモヺ
ヴレリヱ
ヴユモンヤラ
ヴロヰヸ
ヴレリヱ
ヱモヶヴユ
5
ヴヵヰヱ
6
ユヹリヵ
18
ヱ
ヵ
19
20
リ ワヵ ユ
ヶ
チヮユワ
ユワヶ
ヱチヮ
ンチ ワ
ノヶ
ヰヱ
ユ
ラヰヮユ
ヵヰヱ
7
8
15
16
17
ンユヵヶンワ
9
10
21
11
22
12
23
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.


R6/LR6, AA
(Alkaline or
manganese batteries)
Point it at the remote control signal sensor on this
unit. (> 9)
8
VQT3X49
Turn the unit on and off
Select title numbers, etc./Enter numbers or
characters
[CANCEL]: Cancel
3 Select the source
4 Basic playback control buttons (> 23)
5 Select preset radio stations (> 29)
6 Show status messages (> 24)
7 Show the Home screen of the VIERA
Connect (> 30)
8 [3, 4, 2, 1]: Move the highlight for selection
[OK]: Confirm the selection
(2;)(;1): Frame-by-frame (> 23)
9 Show OPTION menu (> 32)
10 Colored buttons
Used for various purposes depending on the
display
11 Set the sound mode (> 41)
12 Select surround sound effects (> 41)/Set the
sleep timer
1Press and hold [–SLEEP].
2While “SLEEP ££” is displayed, press
[–SLEEP] several times to select the time
(in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when canceling the setting.
≥ To confirm the remaining time
Press and hold the button again.
13 TV operation buttons
[Í TV]: Turn the television on and off
[AV, INPUT]: Switch the input select
[i j VOL]: Adjust the volume
14 Adjust the volume of the main unit
15 Mute the sound
≥ “MUTE” flashes on the unit’s display, while
the function is on.
≥ To cancel, press the button again or adjust
the volume.
≥ Muting is canceled if the unit is turned off.
16 Show NETFLIX screen
17 Select radio stations manually (> 29)
18 Exit the menu screen
19 Show HOME menu (> 21)
20 Show Pop-up Menu/Top Menu (> 24)
21 Return to previous screen
22 Start up a video communication (> 30)
23 Select speaker channel (> 41)/Select audio
(> 23)
SC-BTT490P_eng.book 9 ページ
2012年2月22日 水曜日 午前9時1分
Main unit (Front)
2
3
Getting started
1
VOL
OPEN/CLOSE
iPod
SD CARD
4
1
2
3
4
5
6
5
6
7
8 9
10
11
7
8
9
SD card slot (> 20)
USB port (> 20)
Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20o up and down, 30o left and
right
10 Display
11 Dock for iPod/iPhone (> 26)
Standby/on switch [Í/I] (> 18)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Open or close the disc tray (> 20)
Adjust the volume of the main unit
Disc tray
Stop (> 23)
Start play (> 23)
Main unit (Rear)
1*
2
3
4
5
6
7
8
9 10 11 12
13
14
110 127V
220 240V
VOLT ADJ
(on the bottom of the unit)
1
2
3
4
5
6
7
AC IN terminal (> 17)
* (For units with PX printed on the packaging)
The terminal is not polarized.
Speaker terminals (> 13)
Cooling fan
LAN port (> 17)
USB port (> 30)
HDMI AV OUT (ARC) terminal (> 14, 16)
HDMI1 IN (CABLE/SAT) terminal (> 16)
8
9
10
11
12
13
14
HDMI2 IN terminal (> 16)
DIGITAL AUDIO IN terminal (> 14, 15, 16)
FM radio antenna terminal (> 15)
AUX terminal (> 15)
VIDEO OUT terminal (> 15)
Digital transmitter dock for wireless system
(For units with PX printed on the packaging)
AC Voltage selector (> 17)
VQT3X49
9
SC-BTT490P_eng.book 10 ページ
2012年2月22日 水曜日 午前9時1分
STEP 1: Positioning
For optimum position
Place the front, center and surround speakers at approximately the same distance from the seating
position.
≥ Adjust the volume using the Delay time function if the distance between each speaker and the
seating position is not equal. (> 41)



60° 

120°

A Center speaker
≥ Put on a rack or shelf not to interfere with
the TV's various sensors (ambient light,
etc.). Vibration caused by the speaker can
disrupt the picture if it is placed directly on
the TV.
B Front speakers
C Subwoofer
D Surround speakers
≥ Place the speakers at the same height or
higher than ear level.
≥ Keep your speakers at least 10 mm (13/32z) away from the system for proper ventilation.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 42.
Wireless connections (SH-FX71)
∫ Enjoy surround speaker sound wirelessly
Use the optional Panasonic wireless system (SH-FX71).
∫ Upgrade to 7.1-channel system
The main unit is designed to enjoy the 7.1ch surround sound. A more theater-like effect is possible with
a wireless connection.
Necessary equipment:
≥ Wireless system (SH-FX71)
2 optional systems
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
≥ For more details, refer to the operating instructions for SH-FX71.
≥ The WIRELESS LINK indicator lights green when this unit and SH-FX71 are connected wirelessly. You can also check the
link status if you press and hold the [SOUND] of this unit. When WIRELESS LINK is turned on, the main unit's display shows
the message, “WIRELESS SPEAKERS LINKED”.
10
VQT3X49
SC-BTT490P_eng.book 11 ページ
2012年2月22日 水曜日 午前9時1分
STEP 2: Preparing the speakers
1
Getting started
Assembling the front speakers
Attach the stand to the base.
Thread the speaker
cable through the base.
2
Tighten the 3 screws (supplied) securely.
Slide the speaker cable
into the groove.
3
Attach the speaker.
Speaker cable
(Continued on the next page)
VQT3X49
11
SC-BTT490P_eng.book 12 ページ
4
2012年2月22日 水曜日 午前9時1分
Tighten the screw (supplied) securely.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Connecting the speaker cables
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
≥ When connecting speakers with the optional wireless system SH-FX71 (> 10), use the supplied
speaker cables of SH-FX71.
e.g., Surround speaker
r: White
s: Blue line
SURROUND
Lch

Connector
Speaker cable sticker (supplied)
Push
Speaker indication
Speaker cable sticker
Connector
FRONT Lch 1
WHITE
FRONT Rch 2
RED
SURROUND Lch 3
BLUE
SURROUND Rch 4
GRAY
CENTER 5
GREEN
SUBWOOFER 6
PURPLE
12
VQT3X49
SC-BTT490P_eng.book 13 ページ
2012年2月22日 水曜日 午前9時1分
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owner’s manual.
Getting started
Do not connect the AC power supply cord until all other connections are complete.
Speaker connection
Connect the speaker cables to the terminals of the same color.
VQT3X49
13
SC-BTT490P_eng.book 14 ページ
2012年2月22日 水曜日 午前9時1分
Connection to a TV
∫ HDMI
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥ Audio will be output through the system's speakers when “Off” is selected in “HDMI Audio Output”. (> 37)
∫ TV Audio
≥ To output TV audio from this unit's speakers, you need to switch the selector. (> 20)
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to suit the type of audio from your digital equipment. (> 37)
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not display properly.
Best quality
HDMI cable (not supplied)
HDMI
OPTICAL
OUT
Optical digital
audio cable*
(not supplied)
* If the HDMI terminal on the TV is labeled “HDMI (ARC)”, the connection of the optical digital audio cable is not
required.
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home
theater system to receive and play audio from the TV through a signal HDMI cable without additional wiring.
14
VQT3X49
SC-BTT490P_eng.book 15 ページ
2012年2月22日 水曜日 午前9時1分
Optical digital audio
cable (not supplied)
Getting started
Standard picture and better audio
VIDEO IN
OPTICAL
OUT
AUDIO IN
L
R
Video cable (not supplied)
Standard picture and audio
VIDEO IN
Audio cable (not supplied)
AUDIO OUT
AUDIO IN
L
L
R
R
Video cable (not supplied)
FM antenna connection
Affix this end of the antenna to a wall or
pillar where the reception is best.
FM indoor antenna (supplied)
≥ Use an FM outdoor antenna if radio reception is poor.
VQT3X49
15
SC-BTT490P_eng.book 16 ページ
2012年2月22日 水曜日 午前9時1分
Other device connection
∫ When the connecting devices have an HDMI terminal
e.g.,
Set Top Box, etc.
AV IN
(ARC)
HDMI cable
(not supplied)
Video game, etc.
AV OUT
AV OUT
HDMI cable
(not supplied)
HDMI standby pass-through
Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT)
or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this
system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by
pressing [EXT-IN] on the remote control.
∫ When the connecting devices do not have an HDMI terminal
e.g.,
Set Top Box, etc.
OPTICAL
OUT
Optical digital audio cable
(not supplied)
16
VQT3X49
SC-BTT490P_eng.book 17 ページ
2012年2月22日 水曜日 午前9時1分
The following services can be used when this unit is connected to broadband.
≥ This unit supports Wi-Fi DirectTM and can make a
≥ Firmware can be updated (> 19)
wireless connection to wireless devices without
≥ You can enjoy BD-Live (> 24)
router. You can use this function when enjoying Home
≥ You can enjoy VIERA Connect (> 30)
≥ You can access other devices (Home Network) (> 31)
Network feature, etc. Internet access is not available
while connected via Wi-Fi DirectTM. (> 31, 38)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit can be connected to a wireless router wirelessly.
Wireless router, etc.
Internet
≥ For up to date compatibility information on your wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.
≥ See page 3 for the precautions of wireless LAN connection.
LAN cable connection
LAN Cable (not supplied)
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
STEP 4: Connecting to an AC power source
Connect only after all other connections are complete.
AC power supply cord
(supplied)
To a household AC outlet
(For units with PX printed on the packaging)
Before connecting the AC power supply cord;
220 240V
110 127V
VOLT ADJ
Set the voltage at the bottom of the main unit.
≥ Use a flat-head screwdriver to move the voltage selector to the
appropriate position for the area in which this system is used.
≥ If the power plug does not fit your AC
outlet, use the AC plug adaptor
(supplied). If it still doesn't fit, contact an
electrical parts distributor for assistance.
≥ This unit consumes a small amount of AC power (> 49) even when turned off. In the interest of power
conservation, if you will not be using this unit for an extended period of time, it can be disconnected.
VQT3X49
17
Getting started
Connection to the network
SC-BTT490P_eng.book 18 ページ
2012年2月22日 水曜日 午前9時1分
STEP 5: Settings
Easy Setting
After connecting your new home theater for the
first time and pressing [Í], a screen for the basic
settings will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1
Press [Í].
Setup screen appears.
2
Follow the on-screen instructions and
apply the settings.
Wireless connection
Preparation
≥ Obtain your network name (> 19, SSID).
≥ If your wireless connection is encrypted,
please be sure that you know your
encryption key (password).
1
2
Select “Wireless” and press [OK].
Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions and apply the settings.
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
≥ You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. (> 39)
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
Easy Network Setting
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Wired connection
Select “Wired” and press [OK].
Easy Network Setting
Select a connection mode.
Current setting
: Wired
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected SetupTM), you can easily
perform the settings.
∫ “Search for wireless network”
The available wireless networks will be displayed.
1 Select your network name and press [OK].
≥ If your network name is not displayed,
search again by pressing the [R] button on
the remote control. Stealth SSID will not be
displayed, in this case enter manually.
Wireless Settings
Select a wireless network for connection.
Network name (SSID)
Wired
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Wireless
OK
RETURN
Follow the on-screen instructions to apply your
connection settings.
OK
OPTION
R Search again
G
B
Y
RETURN
When your wireless network is encrypted
2 Press [OK] to select “Encryption Key”.
Wireless Settings
Enter the encryption key (password) of the wireless network.
Encryption Key
Set
18
VQT3X49
2012年2月22日 水曜日 午前9時1分
3 Enter your encryption key (password).
Reprogramming the
remote control
Encryption Key (Password)
l
Shift
a
b
c
d
e
f
g
1
2
3
Delete
h
i
j
k
l
m
n
4
5
6
Finish
o
p
q
r
s
t
u
7
8
9
v
w
x
.
@
*
0
#
/
:
y
~
z
Space
_
-
,
;
‘
“
Symbols
Alphanumeric
Other Characters
OK
S
If you have more than one Panasonic products
and the remote control operates both products at
once, you will need to change the remote control
code to prevent this occurrence. (> 40, “Remote
Control Code”)
RETURN
To enter your network name (SSID) manually
If your network name (SSID) is not displayed in
step 1, follow these steps.
1 To display the network name (SSID) input
screen:
Press [HOME] > select “Others” > [OK] >
select “Setup” > [OK] > select “Network” >
[OK] > select “Network Settings” > [OK] >
select “Wireless Settings” > [OK] > select
“Connection Setting” > [OK] > select
“Manual setting” > [OK]
2 Press [OK] to select “SSID” and enter your
SSID.
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
Wireless Settings
New firmware is available.
Please update firmware in Setup.
Enter your network name (SSID) to connect.
SSID
Set
≥ If your wireless network is encrypted, go to step 2.
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your wireless router supports
WPS, check the wireless router operating instructions.
≥ You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 38)
≥ You can redo these settings individually using “Network
Settings”. (> 38)
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID*) for which you
do not have usage rights may be displayed; however,
using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of the wireless router.
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
To update the firmware
Press [HOME] > select “Others” > [OK] >
select “Setup” > [OK] > select “System” >
[OK] > select “Firmware Update” > [OK] >
select “Update Now” > [OK]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
The firmware was updated.
Current Version: x.xx
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(> 40, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 40)
VQT3X49
19
Getting started
SC-BTT490P_eng.book 19 ページ
SC-BTT490P_eng.book 20 ページ
2012年2月22日 水曜日 午前9時1分
Inserting or removing
media
OPEN/CLOSE
Enjoying TV with unit’s
speakers
1
Connect the TV and the main unit.
(> 14-15)
2
Press [EXT-IN] several times to select the
appropriate external input mode. (> 21)
VOL
≥ Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
SD CARD
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the center
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
USB memory or a USB HDD. The USB port on
the rear panel is only for the Communication
Camera.
20
VQT3X49
Selecting the type of audio
1
Press and hold [jAUDIO] to activate the
audio setting mode.
2
Press [jAUDIO] several times to select
the audio. (MAIN, SAP)
≥ Set “PCM-FIX” (> 37) to “Off”.
≥ “SAP” (Secondary Audio Program) only
works with Dolby Dual Mono.
≥ You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SC-BTT490P_eng.book 21 ページ
2012年2月22日 水曜日 午前9時1分
HOME menu
Disc
Major functions of this unit can be operated from
the HOME menu.
SD Card
Preparation
Turn on the television and select the appropriate
video input on the television.
1
2
Press [Í] to turn on the unit.
Press [OK] or [3, 4, 2, 1] to select the
item.
≥ If there are any other items, repeat this
step.
USB
Play back the contents. (> 23)
≥ When multiple contents are
recorded, select the types
of contents or the title.
Sound
Select sound quality (equalizer). (> 34)
iPod
All
Music
(> 26)
HOME
Home theater
EXT IN
Network
FM Radio
Photos
Videos
Music
iPod
Others
Sound
OK
Videos
Others
Personalize
1st user
EXT IN
When you want to output audio of an external
device from this unit, select the name of the
terminal to which you have connected the device.
AUX
AUX terminal
ARC
HDMI AV OUT (ARC)
terminal
DIGITAL IN
DIGITAL AUDIO IN terminal
HDMI IN1
HDMI IN2
HDMI1 IN (CABLE/SAT)
and/or HDMI2 IN terminal
(> 16)
Setup
(> 35)
SD Card
Management
(> 24)
Wallpaper
Changes the background of
HOME menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to play
back the selected video and/or audio.
≥ To save on electricity, the power is turned off automatically
if there is no button operation for about 30 minutes when
not playing back (such as when paused, displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR)
If audio output from a TV or STB is selected, “(TV)”
or “(CABLE/SATELLITE)” is displayed. (> 37)
Network
Network
Service
Displays the Home screen of
VIERA Connect. (> 30)
Home
Network
DLNA Client (> 31)
Media Renderer (> 31)
FM Radio
To enjoy the FM radio (> 29)
VQT3X49
21
Getting started
Videos/Photos/Music
SC-BTT490P_eng.book 22 ページ
2012年2月22日 水曜日 午前9時1分
Multi User Mode
Multi User Mode is a function that enables
switching of multiple settings easily.
Up to 4 people can use the unit with their own
settings.
Following settings can be personalized.
≥ The user icon
≥ The wallpaper of Home menu
≥ The audio and picture settings (> 32, 35)
A
Select
Wallpaper
Personalize a background of
the Home menu.
≥ Other than prepared
wallpapers, you can also
select a photo in recording
media as an wallpaper.
(> 32, “Wallpaper”)
Personalize
Smartphone
Smartphone used as a
remote control can be
registered with respect to
each user.
≥ Multiple users cannot be
registered for one
smartphone.
HOME
USER1
Home theater
EXT IN
Network
FM Radio
Photos
Videos
Music
iPod
Others
Sound
OK
USER1
B
Personalize
2nd user
A The user name and icon currently selected
B Personalize a new user and switch the
users with colored buttons.
4
Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 40)
Switching the user
∫ Using colored buttons
Personalizing a new user
Press the colored buttons in the Home menu to
switch to the user corresponding to the button.
1
2
Press [HOME].
∫ Using facial recognition
3
Select an item and change the settings
according to the indications.
The following items can be set.
Press a colored button that indicates new
user personalization.
Input Nickname
Personalize a user name.
Select Icon
Personalize a user icon.
Select from illustrations
The image can be selected
from prepared illustrations.
Create from Photos
If the Communication camera
is connected, you can shoot
and personalize your photo.
≥ You can also select a
photo in recording media
as an icon. (> 32, “Icon
Personalization”)
(Only when connected to Communication
Camera > 30)
1
2
3
Press [OPTION] in the Home menu.
Select “Facial Recognition” and press [OK].
Turn the face to Communication Camera.
The camera determines the closest face from
the face pictures of the personalized users
and displays the results.
4
Press [OK].
≥ To redo the facial recognition, press [RETURN].
∫ Using registered smartphones
When the unit is turned on using the registered
smartphone, the user who registered the
smartphone will automatically be selected.
≥ Perform the “Remote Device Settings”. (> 38)
≥ To use smartphones as a remote control, installation of
dedicated software is required. For more details, refer to
the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
22
VQT3X49
2012年2月22日 水曜日 午前9時1分
1
Insert the media.
Playback starts depending on the media.
2
Select the item to play and press [OK].
Repeat this procedure if necessary.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished playback
to protect the unit’s motor, your television screen and so on.
≥ MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
Operations during playback
Following functions may not work depending on
the media and contents.
Stop
Press [∫STOP].
The stopped position is memorized.
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or
you press [∫STOP] several times to display
“STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
Search/Slow-motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ BD-Video and AVCHD: [1] (;1) only.
Changing audio
Press and hold [jAUDIO] to activate the audio
setting mode.
You can change the audio channel number or
soundtrack language, etc.
VQT3X49
Getting started
Playback
Playback
Playback
SC-BTT490P_eng.book 23 ページ
23
SC-BTT490P_eng.book 24 ページ
2012年2月22日 水曜日 午前9時1分
Displaying menus and
playback information
Enjoying 3D video and
photos
Show top menu/pop-up
menu
Preparation
Connect 3D compatible TV to an HDMI AV OUT
terminal of this unit using a High Speed HDMI
Cable. (> 14, 16)
≥ Perform the necessary preparations for the TV.
Press [POP-UP MENU/TOP MENU].
≥ Select the item and press [OK].
Show the status messages
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or will disappear from the screen.
≥ Depending on media and contents, the display
may change or may not appear.
e.g., BD-Video
A
T1
B
C1
BD-Video
0:05.14
0:20.52
C
A
B
C
D
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and rest
your eyes.
≥ 3D images may not output as settings of “HDMI
Resolution” and “24p Output”. (> 36)
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in 2D.)
If “2D” and “3D” indications are not displayed, press [R] to
switch the view of playback contents.
Play
Enjoying BD-Live
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
Total time
e.g., JPEG
Date
11/12/2007
Size
500 x 375
Manufacturer
Equipment
≥ Play back following the instructions displayed
on the screen.
≥ 3D Settings (> 35, 37)
1 / 26
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, insertion of an SD card
is necessary along with Internet connection.
1
Perform network connection and settings.
(> 17, 18)
2
Insert an SD card with 1 GB or more free space.
≥ The SD card is used as the local storage.
3
Insert the disc.
∫ Deleting data/Formatting SD
cards
Select “SD Card Management” in the Home
menu (> 21), then select “BD-Video Data
Erase” or “Format SD Card” and press [OK].
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 39).
24
VQT3X49
SC-BTT490P_eng.book 25 ページ
2012年2月22日 水曜日 午前9時1分
Slideshow
Play a slideshow of photos and make various
settings during the playback.
1
2
3
Insert the media.
Select “Photos”.
Select an item and press [G].
Using the iPod/iPhone
Compatible iPod/iPhone (as of January 2012)
≥ Update your iPod/iPhone with the latest
software before using this unit.
≥ Compatibility depends on the software version
of your iPod/iPhone.
≥ iPod/iPhone compatibility assures music, video
and photo playback and battery charge
functions of this unit as a home theater system.
The following items can be set.
Display
Interval
Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Set whether to repeat the
Repeat Play
slideshow.
Soundtrack
Set whether to play background
music.
≥ You can select the soundtrack
from USB device, Music CD
and iPod/iPhone.
≥ Some media cannot be
selected as the source
depending on the case.
Soundtrack
Folder
Select the folder from which the
music files are played.
Random
Soundtrack
Background music is played in
random order.
iPod touch:
1st, 2nd, 3rd, and 4th generation
Playback
Start
Slideshow
Start the slideshow.
You can display still pictures in
the selected folder one by one at
a constant interval.
iPod nano:
1st, 2nd, 3rd, 4th, 5th, and 6th* generation
iPod classic
iPod: 5th* generation
iPhone 4S/ iPhone 4 / iPhone 3GS / iPhone 3G/
iPhone
* Playback functions on the main unit may be limited in the
“All” mode.
≥ In some locations, reception status of an iPhone may be
poor when it is loaded on this unit.
≥ When the iPhone receives a call while connected to this unit,
playback, etc. of the iPhone may stop.
To prioritize the operation with the iPhone connected to this unit,
make the setting so that the iPhone does not receive calls.
≥ Avoid using Wi-Fi mode on your iPhone while the network
functions or surround speakers on this unit are in use
wirelessly.
About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this
unit is on or off.
≥ “IPOD CHARGING” will be shown on the main unit’s
display during iPod/iPhone charging in main unit standby
mode.
≥ iPod/iPhone will not be recharged after the battery charge
completion.
≥ Still pictures displayed as “
” cannot be played back
with this unit.
≥ When a music CD, a USB device with music recorded, and an
iPod/iPhone are inserted/connected to this unit, iPod/iPhone
has priority to played back as background music.
VQT3X49
25
SC-BTT490P_eng.book 26 ページ
2012年2月22日 水曜日 午前9時1分
iPod/iPhone Connection
iPod/iPhone Playback
Preparation
≥ Turn the main unit off or reduce the volume of
the main unit to its minimum.
Preparation
≥ To display the picture, turn on the TV and select
the appropriate video input mode.
1
1
2
3
Push the center of drawer (A), and pull
out fully until it clicks to open the dock.

The center of drawer
2
Attach the dock adapter (B) until it is
firmly in place.
≥ To purchase a dock adapter, consult your
local dealer for iPod/iPhone.
Press [HOME].
Select “iPod” and press [OK].
Select the item to play.
≥ Select “All” mode to display the photo.
≥ Repeat this procedure if necessary.
“All” mode
If “All” mode is used, you can use your iPod or
iPhone to play back music/photo/video files. The
remote control of this unit can be used to control
iPod/iPhone operations.
Album artwork (For music playback only.)
e.g., music playback screen

iPod
Good morning
Ronaldo
Happy days
1:00
-2:30
45 of 1230
3
Connect the iPod/iPhone firmly.
≥ If album artwork is not contained in the
≥ Check that the connector has no dust or
foreign materials before connecting.
data, “
” will appear on TV.
≥ Depending on the software version of your
iPod/iPhone, the album artwork may not
appear properly.
≥ Some operations may not work while
reading the album artwork.
iPod/iPhone
(not supplied)
Other methods of playback
≥ Make sure that the video cable connection is
made to view photos/videos on the TV.
1
2
Press [iPod] to select “IPOD”.
3
Press [3, 4] to select an item and press
[OK].
VIDEO IN
AUDIO IN
Press [STATUS] several times to select the
menus.
≥ The setting of the playback mode will be kept until changes
are made on the same iPod/iPhone.
≥ This function does not work when “All” is selected.
≥ Surround sound effect and sound mode are available.
26
VQT3X49
SC-BTT490P_eng.book 27 ページ
2012年2月22日 水曜日 午前9時1分
VIERA LinkTM
“HDAVI ControlTM”
TV & Radio
Preparation
1 Set “VIERA Link” to “On” (> 39).
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are
changed, repeat this procedure.
Automatic input switching
Power on link
When the following operations are performed, the
input channel of the television will be
automatically switched and the screen of this unit
will be displayed.
When the television is off, the television will
automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is
performed
(e.g., Home menu)
≥ This function does not work when the iPod/
iPhone selector is chosen. (> 26)
All connected equipment compatible with “HDAVI
Control”, including this unit, automatically turns off
when you switch the television off.
Playback
Playing music continuously even after turning
off power to the television
When the unit is connected to a Panasonic TV
(VIERA) that supports HDAVI Control 2 or later.
Select “Video” in “Power Off link” (> 39)
Easy control only with
VIERA remote control
Only when TV supports “HDAVI Control 2” or
later
By using the TV remote control, you can perform
various playback operations and settings.
See the operating instructions of the TV for more
details.
≥ The buttons that you can use for this unit vary depending
on the TV. For details, refer to the operating instructions for
the TV.
≥ The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of
November, 2011) for Panasonic’s HDAVI Control
compatible equipment. This standard is compatible with
Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control
functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a
unique function that we have developed and added. As
such, its operation with other manufacturers’ equipment
that supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
VQT3X49
27
TV & Radio
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a
convenient function which will link the
operations of this unit and a Panasonic TV
(VIERA) under “HDAVI Control”.
You can use this function by connecting
the equipment with an HDMI cable. See the
operating instructions for connected
equipment for operational details.
Power Off link
SC-BTT490P_eng.book 28 ページ
2012年2月22日 水曜日 午前9時1分
Enjoying TV and STB with
unit’s speakers
You can select whether audio is output from the
unit’s speakers or the TV speakers by using the
TV menu settings. Switch the audio output setting
of the TV to this unit’s speakers.
Select the TV audio
When the TV is turned on, this unit will also
automatically turn on.
e.g.,
OPTICAL
OUT
Select the STB audio
When the STB power is turned on, this unit and
the TV will automatically turn on. The video is
output from the TV, and the audio is output from
the speakers of this unit.
≥ When “HDMI Standby Pass-Through” is set to
“Yes” (> 36) this unit will not turn on.
Connecting the HDMI cable
≥ The setting for audio output is not necessary
when the unit is connected to the STB with an
HDMI cable.
e.g.,
Optical digital audio
cable (not supplied)
HDMI cable
(not supplied)
1 Press [HOME].
2 Press [3, 4, 2, 1] to select “Others” and
press [OK].
3 Press [2, 1] to select “Setup” and press [OK].
4 Press [3, 4] to select “Audio” and press [OK].
5 Press [3, 4] to select “TV Audio Input” and
press [OK].
6 Press [3, 4] to switch “AUX”, “ARC” or
“DIGITAL IN” and press [OK].
≥ Select an audio input terminal connected to
the unit.
≥ For details, refer to the operating instructions of the TV.
Set Top Box, etc.
Connecting the optical digital audio cable
≥ When this unit and the STB are connected by
an optical digital audio cable, the settings below
are required to enable output of audio from the
speakers of this unit.
e.g.,
HDMI cable
(not supplied)
Optical digital
audio cable
(not supplied)
Set Top Box, etc.
1 Press [EXT-IN] to select “D-IN”.
2 Press [STATUS] to select “CABLE/
SATELLITE AUDIO ON”.
Set to “CABLE/SATELLITE AUDIO OFF” when
this unit and the STB are not connected by an
optical digital audio cable.
28
VQT3X49
SC-BTT490P_eng.book 29 ページ
2012年2月22日 水曜日 午前9時1分
Listening to the Radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected.
(> 15)
Presetting stations
automatically
1
2
Press [RADIO] to select “FM”.
Press and hold [STATUS] to select
“LOWEST” or “CURRENT”.
LOWEST:
To begin auto preset with the lowest
frequency (FM87.9).
∫ Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH6] or [SEARCH5] to
select the frequency.
≥ To start automatic tuning, press and hold [SEARCH6],
[SEARCH5] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
3 While listening to the radio broadcast
Press [OK].
4 While “P” is flashing on the display
Press the number buttons to select the channel.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
≥ The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
3
TV & Radio
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual
tuning and presetting”.
Press and hold [OK].
Release the button when “AUTO” is
displayed.
Advanced
operations
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
Listening to a preset
channel
Press [RADIO] to select “FM”.
Reference
1
2
Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
Alternatively, press [W, X] or [3, 4].
VQT3X49
29
SC-BTT490P_eng.book 30 ページ
2012年2月22日 水曜日 午前9時1分
Enjoying Network
Service
(NETFLIX, etc.)
1
Advanced operations
≥ The video communication service can be
You can access information services from the
VIERA Connect Home screen via the Internet.
VIERA Connect provides a variety of
selected Internet services such as the
following.
≥ Online movie rental service
≥ Video communication service
≥ Video browsing service
*
XXXXX
X
XXXXXXXX
XXXXXX
XXXXX
XXXXXXXXXXXXXXXXXXXX
Featured Videos
MORE
XXXXXXXXXXX
New York, NY
BACK
39°
F
Mostly Cloudy
Market
XXXX
XXXX
Internet
* Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 17)
≥ Network setting (> 18)
To enjoy video communication (ex. SkypeTM) :
≥ Connect this unit with optional Communication
Camera (TY-CC20W or TY-CC10W).
Depending on your location, this optional
camera may not be available. Please consult
your local Panasonic dealer for advice.
Communication
Camera TY-CC20W or
TY-CC10W
≥ For operating method refer to the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
30
VQT3X49
Press [INTERNET].
accessed directly by pressing [
] button,
and NETFLIX can be accessed directly by
pressing [NETFLIX] button.
2
Select the item and press [OK].
To exit from VIERA Connect
Press [EXIT], [HOME] or [POP-UP MENU/TOP
MENU].
≥ When playing content in the media, VIERA Connect cannot
be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of VIERA Connect
(> 39, “Network Service Lock”)
– When the audio is distorted
(> 38, “Audio Auto Gain Control”)
– When wrong time is displayed
(> 38, “Time Zone”, “DST”)
≥ If using slow Internet connection, the video may not be
displayed correctly. A high-speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you will not be able to use the VIERA Connect
function. (> 19)
≥ VIERA Connect Home screen is subject to change without
notice.
≥ The services through VIERA Connect are operated by their
respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
≥ All features of websites or content of the service may not
be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
SC-BTT490P_eng.book 31 ページ
2012年2月22日 水曜日 午前9時1分
Home Network feature
Playing back contents on
the DLNA server
You can share photos, videos and music stored in
the DLNA Certified media server (PC with
Windows 7 installed, smartphone, etc.) connected
to your home network, and enjoy the contents
with this home theater.
Using the Digital Media
Controller
You can use the smartphone, etc. as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Possible applications:
Renderer
Server
Controller
*
*
Server
Home Theater
1
2
3
4
Press [HOME].
Select “Network”.
≥ The list can be updated by pressing [R] on
the remote control.
≥ The connection method can be switched to Wi-Fi
Direct by pressing [G] on the remote control.
5
6
Select the equipment and press [OK].
Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
≥ Control Panel (> 33) is displayed once the
playback starts. Press [OK] if the Control
Panel is not displayed, and press
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP
MENU].
*
* DMC compatible software should be installed.
Preparation
Perform steps 1 to 3. (> left)
4 Perform the “Remote Device Settings”. (> 38)
≥ You can register up to 16 devices.
1
2
3
4
5
Press [HOME].
6
Operate the DMC compatible devices.
Select “Home Network”.
Select “DLNA Client”.
Server
+
Controller
Advanced
operations
Preparation
1 Perform network connection (> 17) and
network settings (> 18) of this unit.
2 Perform Home Network settings of the
connected equipment.
3 Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
Renderer
Select “Network”.
Select “Home Network”.
Select “Media Renderer”.
Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the indications
on the screen.
To exit from Media Renderer screen
Press [HOME].
For more details, refer to the following website and
the operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
when controlled using DMC.
VQT3X49
31
SC-BTT490P_eng.book 32 ページ
2012年2月22日 水曜日 午前9時1分
Option menu
A variety of playback operations and settings can
be performed from this menu.
Available options differ depending on the playing
contents and the condition of the unit.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
Home menu.
Please refer to page 22 for details about user
registration and switching.
1
Press [OPTION].
(Only when the elapsed time is being displayed
on the unit’s display.)
Select the item which you want to repeat.
≥ The items displayed differ depending on the
type of media.
≥ Select “Off” to cancel.
∫ Shuffle
Select whether or not to play random.
∫ Start Slideshow
Start the slideshow.
∫ Status
Show the status messages.
e.g., BD-Video
Operation Menu
Soundtrack
∫ Repeat Play
1 ENG DTS-HD MSTR Multi
Subtitle
Angle
1
Repeat Play
Off
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
Status
Secondary Video
Playback Information Window
Control Panel
Top Menu
Pop-up Menu
2
Select an item and change the settings.
To exit the screen
Press [OPTION].
Regarding Language: (> 50)
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 21)
∫ Icon Personalization
Set the still picture as your user icon. (> 22)
∫ Video
The recording method of original video appears.
∫ Secondary Video
Operation Menu
∫ Soundtrack
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
32
VQT3X49
Video
Select on/off of images. The recording
method of original video appears.
≥ During search/slow-motion or
frame-by-frame, only the
primary video is displayed.
Soundtrack
Select on/off of audio and the
language.
2012年2月22日 水曜日 午前9時1分
∫ Playback Information Window
Displays the following.
Audio/video attribute information of disc.
Settings status of “Digital Audio Output” (> 36).
*&/+
HDMI output information.
Press [RETURN] to exit.
∫ Control Panel
Display the Control Panel.
Playing back while using VIERA Link, etc.
e.g.,
EXIT
Press [RETURN] to hide the Control Panel.
∫ Top Menu
Display Top Menu.
Video Settings
∫ Picture Mode
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Picture Adjustment
Specific picture quality settings can be performed.
≥ 3D NR:
Reduces the rough noise in the background to
give a greater feeling of depth.
When “24p Output” is set to “On”, this function
may not operate. (> 36)
≥ Integrated NR:
Smoothes block noise and reduces the smudging that
appears around contrasting sections of the picture.
∫ Chroma Process
The high-resolution processing of HDMI chroma signals
produces a high-resolution picture with rich picture quality.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Detail Clarity
The picture is sharp and detailed.
∫ Menu
Display Menu.
∫ Super Resolution
Pictures of normal image quality are corrected to
sharp and detailed images when output as 1080i/
1080p from HDMI AV OUT.
Personal Preference
You can access settings to enjoy special features
of this unit from this category.
Refer to “Video Settings” and “Audio Settings”
(> 34) for more details on each setting item.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ When the content is distorted change the
settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p Output” (> 36).
∫ Screen Aspect
Switch the screen mode.
∫ Reset to Default Video Settings
Return video settings to the factory preset.
VQT3X49
33
Advanced
operations
SC-BTT490P_eng.book 33 ページ
SC-BTT490P_eng.book 34 ページ
2012年2月22日 水曜日 午前9時1分
Audio Settings
“Surround Effects” and “Sound Effects” can also
be set by using the [SURROUND] and [SOUND]
on the remote control. (> 41)
∫ Surround Effects
¾ BD/DVD (Multi-ch Source):
3D Cinema
Surround
Expand the sound field
forward, backward, upward,
right and leftward providing
a sound with depth and
force that better
matches 3D images.
You can enjoy 6.1/7.1-channel
7.1ch Virtual
surround-like effect using
Surround
5.1-channel speakers.
2ch Stereo
You can play any source in
stereo. Sound will be output
to the front speakers and
the subwoofer only.
Digital Tube Sound:
This feature gives you warm sound, like that
produced by a vacuum tube amplifier.
Digital Tube
Sound 1
A crisp, delicate sound
Digital Tube
Sound 2
A tight, hi-fi sound
Digital Tube
Sound 3
A soft, rich sound
Digital Tube
Sound 4
A clear, powerful sound
Digital Tube
Sound 5
A distinctive mid-range
sound
Digital Tube
Sound 6
A soft, enveloping sound
¾ All:
Equalizer
You can select sound quality
settings.
Flat/Heavy/Clear/Soft
Subwoofer
You can adjust the amount
of bass.
Level 1 (Weakest effect) to
Level 4 (Strongest effect)
≥ Levels can be set by
source.
H.Bass
You can enhance low-frequency
sound so that heavy bass sound
can be heard clearly, even if the
acoustics of your room are not
optimal.
¾ TV/CD/iPod (2ch Source):
You can enjoy sound from the
Multi
front speakers, as well as the
Channel Out surround speakers even when
playing stereo sources.
Super
Surround
You can enjoy sound from all
speakers with stereo sources.
Dolby Pro
Logic II Movie
Suitable for movie software, or the
one recorded in Dolby Surround.
Dolby Pro
Logic II Music
Adds 5.1-channel effects to
stereo sources.
∫ Sound Effects*1, 2, 3
¾TV/CD/iPod (2ch Source):
Re-master:
This feature gives you brighter sound by
increasing the high frequency portion of the
audio. (Discs recorded at 48 kHz or less)
Recommended settings:
34
Re-master 1
Pop and rock
Re-master 2
Jazz
Re-master 3
Classical
VQT3X49
You can enhance the
Whisper-Mode surround effect for low
Surround
volume sound. (Convenient
for late night viewing.)
Center
Focus
You can make the Center
channel sound seem like it is
coming from within the TV.
∫ High Clarity Sound
When connected to TV via the HDMI terminal for
outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High
Clarity Sound” (> 37).
2012年2月22日 水曜日 午前9時1分
∫ High Clarity Sound Plus
When playing back music contents, it improves
the sound quality by stopping the video output.
≥ Only when you have selected “Enable” in “High
Clarity Sound” (> 37).
*1
*2
*3
Not every function can be set individually.
When audio is output from the HDMI AV OUT terminal this
function is effective only when “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” is set to “PCM”. (> 36)
This function has no effect when the type of audio is Dolby Pro Logic II.
3D Settings
∫ Signal Format
Original
Keep original picture format.
Side by side
3D picture format comprising of
left and right screens.
2D to 3D
Converts 2D pictures to 3D effect.
∫ 3D Picture Mode
Normal
Play back pictures with normal
3D effects.
Soft
You can enjoy 3D pictures with a
feeling of broadness, holding
back the depth perception.
Manual
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect by
both menus.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
Home menu.
Please refer to page 22 for details about user
registration and switching.
1
2
Press [HOME].
3
Press [2, 1] to select “Setup” and press
[OK].
Press [3, 4, 2, 1] to select “Others” and
press [OK].
Setup
Normal
Picture Mode
Video
Picture Adjustment
Audio
Advanced
Chroma Process
0
Detail Clarity
3D
1
Super Resolution
Language
Network
Play back 3D pictures with
settings of “Manual Settings”.
HDMI Output
Auto
Still Mode (paused video)
On
Seamless Play
Ratings
Advanced
operations
SC-BTT490P_eng.book 35 ページ
Lighter
Black Level Control
System
OK
RETURN
∫ Manual Settings
Distance
Set the amount of depth perception.
4
Screen Type
Selects how the screen appears
during 3D playback (flat or round).
To exit the screen
Press [HOME].
Frame Width
Set the amount of feathering at
the edge of screen.
Frame Color
Set the color of feathering at the
edge of screen.
∫ Pop-Out Level
(Only when “Full HD” is selected in “3D Type” (> 37).)
3D position for the Option menu or message
screen etc. can be adjusted during 3D playback.
Select an item and change the settings.
Video
∫ Picture Mode
(> 33)
∫ Picture Adjustment
∫ Chroma Process
∫ Detail Clarity
(> 33)
(> 33)
(> 33)
∫ Super Resolution
(> 33)
∫ HDMI Output
Press [OK] to show the following settings:
VQT3X49
35
SC-BTT490P_eng.book 36 ページ
2012年2月22日 水曜日 午前9時1分
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item
without “¢” is selected, the images may be distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected television is
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other
material recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then set
“24p” in “Video Settings” (> 33) to “On”.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥ 24p: A progressive image recorded at a rate of 24
frames per second (motion-picture film). Many
BD-Video movie contents are recorded in 24 frames/
second in accordance with the film materials.
¾HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal when the unit is
connected using an HDMI cable.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color output when a television that supports
Deep Color is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
¾HDMI Standby Pass-Through
Even if this unit is in standby mode, a device
connected with this unit can output videos and
sound to the TV.
Moreover, you can switch the HDMI input terminal by
pressing [EXT-IN] on the remote control.
≥ Sound will not be output from this unit's
speakers.
36
VQT3X49
∫ Still Mode (paused video)
Select the type of picture shown when you pause
playback.
Auto
Automatically selects the type of
picture shown.
Field
Select if jittering occurs when “Auto” is
selected.
Frame
Select if small text or fine patterns cannot
be seen clearly when “Auto” is selected.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select “On”, when the picture freezes for a
moment at the chapters segment in playlists.
∫ Black Level Control
(This works only for video output from the VIDEO
OUT terminal.)
Select lighter or darker for adjusting the black level
to the desired setting for picture enhancement.
Audio
∫ Surround Effects
∫ Sound Effects
(> 34)
(> 34)
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ Not making the proper settings may result in noise.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary audio only.
2012年2月22日 水曜日 午前9時1分
¾ HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Audio will be output through the system's
speakers when “Off” is selected.
∫ Digital Audio Input
Press [OK] to show the following settings:
¾ PCM-FIX
Selects the audio output from the devices
connected to this unit.
≥ “On”: PCM is available.
≥ “Off”: DTS, PCM and Dolby Digital are available.
Select “On” if the sound is cut off intermittently.
∫ TV Audio Input
Select the TV audio input to work with the VIERA
Link operations.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded” to enjoy the
surround sound.
≥ There is no downmix effect on the bitstream
audio signal.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Dolby TrueHD playback
– Playback of secondary audio (including the
button click sound).
∫ High Clarity Sound
When connected to TV via the HDMI AV OUT
terminal for outputting image, it produces clearer
sound.
≥ Select “Enable” to use “High Clarity Sound” or “High
Clarity Sound Plus” in the Option menu. (> 34, 35)
∫ Audio Delay
3D
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when
“Checker board” or “Side by side” is selected.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning screen
when playing back the 3D compatible video software.
∫ Manual Settings
∫ Pop-Out Level
(> 35)
(> 35)
Language
∫ Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 50) when you select “Other
¢¢¢¢”.
∫ Subtitle Language
Choose the language for the subtitle.
≥ If “Auto” is selected and the language selected
for “Audio Language” is not available, subtitles
of that language will automatically appear if
available on that disc.
≥ Enter a code (> 50) when you select “Other
¢¢¢¢”.
Synchronization between picture and sound is corrected
by adjusting the delay time of the audio output.
∫ Speaker
Refer to page 40.
VQT3X49
37
Advanced
operations
SC-BTT490P_eng.book 37 ページ
SC-BTT490P_eng.book 38 ページ
2012年2月22日 水曜日 午前9時1分
∫ Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 50) when you select “Other
¢¢¢¢”.
∫ Subtitle Text
Select a suitable item according to the language
used for MKV subtitles text.
≥ This item is displayed only after playing back a file.
Press [OK] to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
¾ Network Service Settings (> 30)
(VIERA Connect)
Press [OK] to show the following settings:
∫ On-screen Language
Choose the language for menus and on-screen
messages.
Network
∫ Easy Network Setting (> 18)
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
¾Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this
sets the connection speed.
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
¾IP Address/DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
38
VQT3X49
Audio Auto Gain Control
Volume that is different depending on the contents
is adjusted automatically to the standard volume
while using the VIERA Connect.
≥ Depending on contents, this function effect
will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set
the unit’s time to match your location.
≥ Some VIERA Connect contents require the time
zone to be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
¾ Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of connected
equipment, refer to the following Website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
¾ Remote Device Settings (> 31)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” is fixed to “On”.
Setting Unit Name
Set the name of this unit to be displayed on
the connected equipment.
2012年2月22日 水曜日 午前9時1分
Registration Type
Auto
Allow connection to all the
equipment that is accessing this unit.
Manual
Set the permission of the connection
individually for the equipment that is
accessing this unit.
¾ TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and
playing 16:9 ratio image:
4:3
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
¾ BD-Live Internet Access (> 24)
You can restrict Internet access when BD-Live
functions are used.
≥ If “Allow (Limited)” is selected, Internet
access is permitted only for BD-Live contents
which have content owner certificates.
Ratings
The following items use the same password.
Don’t forget your password.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
The sides are cut off
so the picture fills
the screen. When
playing BD-Video,
video is output as “4:3 Letterbox”.
Black bands appear
4:3
at the top and bottom
Letterbox
of the picture.
When connected to a 16:9 widescreen
television and playing 4:3 ratio image:
16:9
Video is displayed as a 4:3 ratio
image in the center of the
screen.
¾ Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If a list of playback content is displayed and there
is no operation for 10 minutes or more, the screen
switches to HOME menu automatically.
≥ While playing and pausing, etc., this function
is not available.
¾ Status Messages
∫ Network Service Lock
You can restrict the usage of VIERA Connect.
System
∫ Easy Setting
You can execute basic settings.
∫ Display Settings
Press [OK] to show the following settings:
Choose whether to show status messages
automatically.
¾ VIERA Link
Set to use “HDAVI Control” function when
connected via HDMI cable to a device that
supports “HDAVI Control”.
≥ Select “Off” when you do not want to use
“HDAVI Control”.
Power Off link
Select the desired power off link setting of this unit
for VIERA Link operation (> 27). (This works
depending on the settings of the connected VIERA
Link “HDAVI Control” compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn
off automatically.
Video:
When playing back audio only content, the
unit will not turn off automatically.
VQT3X49
39
Advanced
operations
SC-BTT490P_eng.book 39 ページ
SC-BTT490P_eng.book 40 ページ
2012年2月22日 水曜日 午前9時1分
∫ Unit Settings
Press [OK] to show the following settings:
Speaker settings
¾Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright
and only dimmed during playback.
¾Edit User Information
Change the user information registered in the
Home menu.
∫ Quick Start
Speed of startup from power off is increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase compared to when set to “Off”. (About
the power consumption > 49)
∫ Remote Control Code
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (> 19)
Press [OK] to show the following settings:
¾Automatic Update Check
When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.
¾Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾License
Information about the software used by this unit
is displayed.
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
40
VQT3X49


ms
0.0
L
C
Complete

dB
0
Test
dB
0
LS
dB
0
ms
0.0
R
SW
dB
0
RS
A Volume (Channel balance)
B Delay time for the Center speaker
C Delay time for the Surround and Surround
back speakers*
* Surround back speakers: optional (> 10)
∫ Adjusting speaker level
(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].
A test signal is output.
2 While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker ( dB0 ).
The volume can be adjusted between r6 dB
to s6 dB.
≥ Set each speaker level according to the
volume of the Front (L) and Front (R)
speaker volume respectively.
3 Press [OK].
The test signal stops.
SC-BTT490P_eng.book 41 ページ
2012年2月22日 水曜日 午前9時1分
∫ Delay time
For optimum listening with 5.1-channel sound, all
the speakers, except for the subwoofer, should be
the same distance from the seating position.
If either distance 1 or 2 is less than 3,
measure the distance and adjust the time to make
up for the difference (see the table below).
: A
C
C
L
R
1
3
: B
Enjoying sound effects
from all speakers
For more details on each setting, refer to “Audio
Settings” on the Option menu(> 34)
Surround Effects
1 Press [SURROUND].
2 Press [3, 4] to select “MULTI CH SOURCE”
or “2CH SOURCE”, and then press [OK].
e.g.,
SW
2
3 While the selected mode is displayed
Press [3, 4] to select the desired setting. (> 34)
RS
LS
RS
∫ Adjusting speaker level during
play
1 2 3: Primary listening distance
A Actual speaker position
B Ideal speaker position
1
Press [3, 4, 2, 1] to select the distance
box (
2
ms
0.0
) and press [OK].
Press [3, 4] to select the setting and
press [OK].
Delay time for the Center speaker
Subtract the distance 1 from 3
Distance (Approx.)
Setting
34 cm (1 ft. 1 in.)
1.0 ms
68 cm (2 ft. 2 in.)
2.0 ms
102 cm (3 ft. 4 in.)
3.0 ms
136 cm (4 ft. 5 in.)
4.0 ms
170 cm (5 ft. 6 in.)
5.0 ms
1 Press [CH SELECT] to activate the speaker
setting mode.
2 Press [CH SELECT] several times to select
the speaker.
≥Press [2, 1] to adjust the balance of
the front speakers.
3 Press [3] (increase) or [4] (decrease) to adjust
the speaker level for each speaker.
s6 dB to r6 dB
Sound Effects
1 Press [SOUND].
2 Press [3, 4] to select “2CH SOURCE” or
“ ALL SOURCE”, and then press [OK].
e.g.,
Delay time for the Surround and Surround
back speakers
Subtract the distance 2 from 3
Distance (Approx.)
Setting
170 cm (5 ft. 6 in.)
5.0 ms
340 cm (11 ft. 1 in.)
10.0 ms
510 cm (16 ft. 8 in.)
15.0 ms
3 While the selected mode is displayed
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (> 34)
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and
press [OK].
≥ The sound effects/modes may not be available or have no
effect with some sources.
≥ You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
VQT3X49
41
Advanced
operations
LS
SC-BTT490P_eng.book 42 ページ
2012年2月22日 水曜日 午前9時1分
Speaker installation
option
Front speaker
Attach to a wall without the base and the stand.
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.


Attaching to a wall
You can attach all of the speakers (except
subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 kg (22 lbs) per screw.
1

Drive a screw (not supplied) into the wall.





A
B
C
D
E
At least 30 mm (1 3/16q)
‰ 4.0 mm (5/32q)
‰ 7.0 mm to ‰ 9.4 mm (9/32q to 3/8q)
Wall or pillar
5.5 mm to 7.5 mm (7/32q to 5/16q)
2
Fit the speaker securely onto the screw(s)
with the hole(s).
e.g., Front speaker
DO NOT
DO
A 51 mm (2q)
B 64 mm (2 17/30q)
C 350 mm (13 25/32q)
Surround speaker


D 40 mm (1 9/16q)
E 24 mm (15/16q)
Center speaker
≥ In this position, the
speaker will likely
fall if moved to the
left or right.
≥ Move the speaker
so that the screw is
in this position.



Use the measurements indicated below to identify
the screwing positions on the wall.
≥ Leave at least 20 mm (25/32q) of space above the
speaker and 10 mm (13/32q) on each side to
allow enough space for fitting the speaker.
F 18 mm (23/32q)
G 25 mm (31/32q)
H 230.5 mm (9 1/16q)
42
VQT3X49
SC-BTT490P_eng.book 43 ページ
2012年2月22日 水曜日 午前9時1分
Front speaker assembly option
It is possible to shorten the height of the front
speaker by directly connecting the speaker to the
base without using the stand.
Preparation
Detach the speaker cable from the stand.
1
Thread the detached cable through the
base.
Preventing the speakers
from falling or dropping
Preventing from falling
Front speaker
Preventing from dropping
Front speaker, Surround speaker, Center speaker
1
Thread a string to the speaker.
≥ Use a string of less than ‰ 2.0 mm (3/32q),
which is capable of supporting over 10 kg
(22 lbs).
e.g., Front speaker

Attach the speaker to the base and tighten
the screw (supplied) securely.

A String (not supplied)
B Rear of the speaker
2
Thread a string from the wall to the
speaker and tie tightly.
When placed on the floor



3
Connect the speaker cable to the speaker
and to the terminal of the main unit.
(> 12, 13)
When mounted on a wall
∫ Reattaching the speaker cable
to the stand


Straighten the
cable and run
through the
stand.
Pull out the
cable through
the hole.
C
D
E
F

Screw eye (not supplied)
Wall
Approx.150 mm (5 29/32q)
Less than 100 mm (3 15/16q)
VQT3X49
43
Advanced
operations
2
SC-BTT490P_eng.book 44 ページ
2012年2月22日 水曜日 午前9時1分
Troubleshooting guide
Reference
Before requesting service, please perform the
following steps.
(For the U.S.A. and Canada)
Do you have the latest firmware installed?
Firmware updates may be released to correct
operating irregularities that are discovered
with certain movies. (> 19)
4
Make the following checks and visit our
website for more information.
For U.S.A.:
www.panasonic.com/help
Enter the model number.
For Canada:
http://www.panasonic.ca
4
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
Other support information:
“Customer Services Directory (United States
and Puerto Rico)” (> 54) or “Limited
Warranty (Only for CANADA)” (> 55).
(For units with PX printed on the packaging)
Do you have the latest firmware installed?
Firmware updates may be released to correct
operating irregularities that are discovered
with certain movies. (> 19)
Even so, you still have trouble, consult your dealer.
The following do not indicate a problem with this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫ Unit doesn’t respond to remote
control or front panel buttons.
Press and hold [Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
1 While the unit is off, press and hold [OK], [B]
and [Y] on the remote control at the same
time for more than 5 seconds.
–“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “06 FTO” is
displayed on the unit’s display.
3 Press [OK] on the remote control or
[< OPEN/CLOSE] on the unit.
44
VQT3X49
General operation
To return to the factory preset.
¾ Select “Yes” in “Restore Default Settings” in
the Setup menu. (> 40)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B]
and [Y] on the remote control at the same
time for more than 5 seconds.
–“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “08 FIN” is
displayed on the unit’s display.
3 Press and hold [OK] on the remote control or
[< OPEN/CLOSE] on the unit for at least 3 seconds.
This unit is turned off when the input for the
TV is switched.
¾ This is a normal phenomenon when using VIERA
Link (HDAVI Control 4 or later). For details please
read the operating instructions for the TV.
The remote control doesn’t work properly.
¾ Change the batteries in the remote control. (> 8)
¾ The remote control and main unit are using different
codes. If “SET ” is displayed on the unit’s display
when a button is pressed on the remote control,
change the code on the remote control. (> 40, 48)
The TV tuner mode is not displayed when the
TV is switched on.
¾ This phenomenon may occur, depending on the
TV setting, when “Quick Start” is set to “On”.
¾ Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B]
and [Y] on the remote control at the same
time for more than 5 seconds.
–“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “03 VL” is
displayed on the unit’s display.
3 Press [OK] on the remote control or
[< OPEN/CLOSE] on the unit.
SC-BTT490P_eng.book 45 ページ
2012年2月22日 水曜日 午前9時1分
This unit does not recognize the USB
connection correctly.
¾ Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
the power of this unit off and on again.
¾ If you connect USB HDD to this unit, use USB
extension cable that is supplied with the HDD.
¾ If irregular coloring occurs on your TV, turn
the TV off for about 30 minutes.
If it persists, move the speakers further away from the TV.
The unit switches to standby mode.
¾ This unit will automatically turn to standby
mode after 30 minutes if it is inactive. (> 21)
¾ When the time set for the sleep timer has
passed, the power will be turned off. (> 8)
¾ One of the unit’s safety devices is activated. Press
[Í/I] on the main unit to turn the unit on.
Video is not output in high-definition.
¾ Confirm that “HDMI Resolution” in the Setup
menu is set properly. (> 36)
Picture
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
¾ An incorrect resolution is selected in “HDMI
Resolution”. Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B]
and [Y] on the remote control at the same
time for more than 5 seconds.
–“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “04 PRG” is
displayed on the unit’s display.
3 Press and hold [OK] on the remote control or
[< OPEN/CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 36)
–When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output in
bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. (> 40)
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be
output depending on the connection method.
After removing the disc from this unit, select
“Set before play” in the Setup menu, and
select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 37)
3D video is not output.
¾ Change the settings as required by the
connected TV format. (> 37, “3D Type”)
¾ Are the settings on this unit and the TV correct? (> 24)
¾ Depending on the connected TV, the video being
played back might switch to 2D video due to changes
in resolution etc. Check the 3D setting on the TV.
¾ Check that proper HDMI video input is
selected on the TV.
3D video is not output correctly as 2D.
¾ Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 37, “3D
BD-Video Playback”)
¾ Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
No subtitles.
¾ When progressive output is on, closed
captions/subtitles cannot be displayed.
Reference
The unit does not turn off.
1 Press and hold [Í/I] on the main unit for 5
seconds. (If still unable to power the unit off,
disconnect the power cord, wait 1 minute,
then reconnect the power cord.)
2 Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME],
[< OPEN/CLOSE] and [Í/I] on the main unit at
the same time for more than 5 seconds.
Video is not output.
¾ Set “High Clarity Sound” in the Setup menu to
“Disable” to use the VIDEO OUT terminal. (> 37)
The subtitles overlap closed captions
recorded on discs.
¾ Turn off the subtitles or the closed caption
setting on the TV. (> 32)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. (> 39)
¾ Adjust the aspect setting on the television.
VQT3X49
45
SC-BTT490P_eng.book 46 ページ
2012年2月22日 水曜日 午前9時1分
Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
¾ Check connections to speakers and other
equipment. (> 11s17)
¾ Ensure the speaker settings for your
speakers are correct. (> 40)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 37)
¾ When “BD-Video Secondary Audio” is set to “On”,
Dolby TrueHD, Dolby Digital Plus, DTS-HD Master
Audio and DTS-HD High Resolution Audio are
output as Dolby Digital or DTS Digital Surround.
¾ Re-master will not work when the bitstream signal
is output from the HDMI AV OUT terminal. (> 34)
¾ Depending on the connected equipment, the
sound may be distorted if this unit is
connected with an HDMI cable.
¾ The multi-channel audio from a device
connected to the TV is not output in it’s
original multi-channel form.
–If the device has an optical audio output
terminal, connect the device to this unit’s
DIGITAL AUDIO IN terminal. (> 16)
No surround sound.
¾ Press [SURROUND] to select a surround effect. (> 41)
¾ (When using the 7.1ch speaker system)
Audio is not available from the surround back speakers
(optional) even though Dolby Pro Logic II turns on.
Cannot switch audio.
¾ When audio is output from the HDMI AV OUT
terminal, set “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” to “PCM”. (> 36)
No sound from the TV.
¾ Press [EXT-IN] to select the corresponding
source. (> 20)
¾ When connecting the unit to a TV using an
HDMI cable, check whether the HDMI
terminal on the TV is labeled “HDMI (ARC)”. If
not labeled in this way, connect using the
HDMI cable in combination with an optical
digital audio cable.(> 14)
¾ If there is no sound from the equipment
connected to this unit’s DIGITAL AUDIO IN
terminal, please make sure that the optical
audio output of the equipment is set to PCM.
46
VQT3X49
Playback
Disc cannot be played.
¾ The disc is dirty. (> 5)
Still pictures (JPEG) do not play back normally.
¾ The images that were edited on the PC, such as
Progressive JPEG, etc., may not be played back.
I can’t play back BD-Live.
¾ The SD card is write-protected. (> 7)
¾ Confirm that this unit is connected to the
broadband Internet. (> 17)
¾ Confirm the “BD-Live Internet Access”
settings. (> 39)
¾ Confirm an SD card is inserted into the SD
card slot. (> 20)
Alternative soundtrack and subtitles cannot
be selected.
¾ The languages are not recorded on the disc.
¾ You may not be able to use the Option menu to
change the soundtrack and subtitles on some discs.
Use the disc’s menus to make changes. (> 24)
iPod/iPhone operation
Cannot charge or operate.
¾ Check that the iPod/iPhone is connected firmly. (> 26)
¾ The battery of the iPod/iPhone is depleted. Charge
the iPod/iPhone, and then operate again.
¾ When unexpected operation occurs while using the
iPod/iPhone, connect the iPod/iPhone again or try
to restart the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on the TV.
¾ Make sure that TV is connected to the VIDEO
OUT terminal on this unit. (> 15)
¾ Operate the iPod/iPhone menu to make the
appropriate video/photo output settings for your TV.
(Refer to operating instructions for your iPod/iPhone.)
The TV input channel unintentionally changes
to HDMI input.
¾ When the main unit is connected with an “HDAVI
Control” compatible TV and VIDEO IN is selected for
iPod/iPhone video or photo playback, the TV input
channel will automatically change to the HDMI input
channel when [HOME] is pressed.
–Re-select the TV’s VIDEO IN input channel.
2012年2月22日 水曜日 午前9時1分
Radio
Distorted sound or noise is heard.
¾ Adjust the position of the antenna.
A beat sound is heard.
¾ Try to keep a certain amount of distance
between the antenna and the TV.
Stations cannot be selected.
1 Press [RADIO] to select “FM”.
2 Press and hold [RADIO].
After a few seconds the display changes to show
the current lowest frequency (87.9 MHz). Continue
to hold the button down. The lowest frequency
changes (87.5 MHz) and the step is changed.
Noise is excessive.
¾ Change the audio to be output as monaural.
1 Press and hold [jAUDIO].
2 Press [jAUDIO] to select “MONO”.
The sound becomes monaural.
≥ To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUTO STEREO”
Network
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 17, 18, 38)
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video from
the DLNA Certified media server is not played back
or video frames are dropped during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 38), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection. If 3
or fewer indicators are lit or the connection is being
interrupted, change the position or angle of your
wireless router and see if the connection state
improves. If there is no improvement, connect to a
wired network and perform the “Easy Network
Setting” (> 18) again.
Messages
The following messages or service numbers
appear on the television or unit’s display.
On the television
Cannot play.
¾ You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
Cannot display on this unit.
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not
displayed and re-insert the card.
No disc inserted.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
For example;
–BD-Video: During playback, reverse
slow-motion or reverse frame-by-frame is
not possible.
IP address is not set.
¾ The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾ Authentication type for the wireless LAN is set to
“Open system”, or the encryption type is set to
“No encryption”. It is recommended to encrypt for
safety reasons. For details, refer to the
instructions of the wireless router being used.
Encryption is required when playing back video,
etc., from DLNA compatible devices.
No Video
¾ Depending on the connected iPod/iPhone,
video menu may not be available on the TV.
Select “ALL” on the unit’s display and operate
video playback from your iPod/iPhone menu.
(> 26)
VQT3X49
47
Reference
SC-BTT490P_eng.book 47 ページ
SC-BTT490P_eng.book 48 ページ
2012年2月22日 水曜日 午前9時1分
On the unit’s display
F99
¾ The unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
HDMI ONLY
¾ Some BD-Video discs can only be output with
HDMI.
NET
¾ While connecting to a network.
No PLAY
¾ There is a viewing restriction on a BD-Video
or DVD-Video. (> 39)
No READ
¾ The media is dirty or badly scratched. The
unit cannot play.
PLEASE WAIT
¾ The unit is carrying out an internal process.
This is not a malfunction. You cannot operate
the unit while “PLEASE WAIT” is displayed.
REMOVE
¾ The USB device is drawing too much power.
Remove the USB device.
SET (“ ” stands for a number.)
¾ The remote control and main unit are using
different codes. Change the code on the
remote control.
Press and hold [OK] and
the indicated number
button at the same time for
more than 5 seconds.
U59
¾ The unit is hot.
The unit switches to standby for safety
reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when
installing the unit.
H or F
(“ ” stands for a number.)
¾ Check and correct the speaker cable
connections.
¾ There is something unusual.
48
VQT3X49
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
2 Press [Í/I] to turn the power on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
IPOD OVER CURRENT ERROR
¾ The iPod/iPhone is drawing too much power.
Remove the iPod/iPhone, and turn the unit off
and on again.
START
¾ The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FINISH
¾ The firmware update is complete.
NOT CONDITIONAL
¾ The requested operation cannot be
conducted.
SET OK
¾ The stations are set, and the radio tunes to
the last preset station.
ERROR
¾ Automatic presetting is unsuccessful. Preset
the stations manually.
TUNED/STEREO
¾ Stereo broadcasting or stereo sound is
selected.
TUNED
¾ Monaural broadcasting or monaural sound is
selected.
2012年2月22日 水曜日 午前9時1分
Specifications
GENERAL
FRONT SPEAKERS
Full range:
Dimensions (WkHkD):
Power consumption
(For the U.S.A. and Canada): 84 W
(For units with PX printed
on the packaging):
89 W
Power consumption in standby mode
(For the U.S.A. and Canada): Approx. 0.05 W
(For units with PX printed
on the packaging):
Approx. 0.1 W
Power supply
(For the U.S.A. and Canada): AC 120 V, 60 Hz
(For units with PX printed
on the packaging):
AC 110 V to 127 V,
220 V to 240 V,
50 Hz/60 Hz
iPod/iPhone Connector:
Dimensions (WkHkD):
DC OUT 5 V 1.0 A MAX
430 mmk38 mmk279 mm
(1615/16qk11/2qk1031/32q)
Mass (Weight):
Approx. 2.7 kg (6 lbs)
Operating temperature range: 0 oC to 40 oC (32 oF to 104 oF)
Operating humidity range: 35 % to 80 % RH (no condensation)
AMPLIFIER SECTION
RMS TOTAL POWER OUTPUT: 1000 W
1 kHz, 10 % total harmonic distortion
185 W per ch (3 ≠)
FRONT:
180 W per ch (3 ≠)
CENTER:
125 W per ch (3 ≠)
SURROUND:
100 Hz, 10 % total harmonic distortion
200 W per ch (3 ≠)
SUBWOOFER:
FTC TOTAL POWER OUTPUT: 430 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion
FRONT:
60 W per ch (3 ≠)
CENTER:
90 W per ch (3 ≠)
SURROUND: 60 W per ch (3 ≠)
45 Hz to 120 Hz, 1.0 % total harmonic distortion
SUBWOOFER:
100 W (3 ≠)
Audio Input
AUX:
k1
Digital Audio Input
Optical
k1
HDMI AV input
k2
Sampling frequency:
Audio Format:
SPEAKER SECTION*
32 kHz, 44.1 kHz, 48 kHz
PCM, Dolby Digital, DTS
FM TUNER SECTION
Frequency range: 87.9 MHz to 107.9 MHz (200 kHz step),
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals: 75 ≠ (unbalanced)
Mass (Weight):
CENTER SPEAKER
Woofer:
Full range:
Dimensions (WkHkD):
Mass (Weight):
SURROUND SPEAKERS
Full range:
Dimensions (WkHkD):
Mass (Weight):
SUBWOOFER
Woofer:
Dimensions (WkHkD):
Mass (Weight):
6.5 cm (21/2q) CONE TYPE
292 mmk1185 mmk292 mm
(111/2qk4621/32qk111/2q)
Approx. 2.6 kg (5.7 lbs)
6.5 cm (21/2q) CONE TYPE
6.5 cm (21/2q) CONE TYPE
280 mmk84 mmk78 mm
(111/32qk35/16qk33/32q)
Approx. 0.91 kg (2.0 lbs)
6.5 cm (21/2q) CONE TYPE
80 mmk139 mmk70 mm
(35/32qk51/2qk225/32q)
Approx. 0.47 kg (1.0 lbs)
16 cm (61/2q) CONE TYPE
180 mmk408 mmk300 mm
(73/32qk161/16qk1113/16q)
Approx. 4.3 kg (9.5 lbs)
* The impedance of all the speakers is 3 ≠.
TERMINAL SECTION
USB slot:
SD card slot:
Ethernet:
Wireless LAN:
USB2.0: 2 system
Connector: 1 system
10BASE-T/100BASE-TX 1 system
Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz band
Security:
WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
VIDEO SECTION
Signal system:
Video output
Output level:
Output connector:
HDMI AV output*
Output
connector:
HDMI AV Input*
Input connector:
NTSC
1.0 Vp-p (75 ≠)
Pin jack (1 system)
Type A (19 pin)
Type A (19 pin) 2 system
LASER Specification
Class I LASER Product
Wave length:
790 nm (CDs)/660 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous radiation is emitted
with the safety protection
* This unit supports “HDAVI Control 5” function.
Specifications are subject to change without notice.
VQT3X49
49
Reference
SC-BTT490P_eng.book 49 ページ
SC-BTT490P_eng.book 50 ページ
2012年2月22日 水曜日 午前9時1分
File format
File format
MP3
JPEG
Extension
Reference
“.MP3”, “.mp3”
This unit supports ID3 tags,
but only titles, artist names
and album names can be
displayed.
“.JPG”, “.jpg”
≥ MOTION JPEG and
Progressive JPEG is not
supported
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file name
on a PC or other device.
Supplemental
information
∫ Display languages list
Display
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
Language
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
Display
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Language
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
Display
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Language
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
“.MKV”, “.mkv” ≥ The video file and
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV files may not
play back, depending on
the video resolution and
frame rate condition.
FLAC
“.flac”
Maximum sampling rate:
192 kHz/24 bit
WAV
“.wav”
Maximum sampling rate:
48 kHz/16 bit
MPO
“.mpo”
3D still picture
MKV
≥ With certain recording states and folder structures, the
play order may differ or playback may not be possible.
Restriction on use of
unauthorized copied content
This unit adopts the following technology for
copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit
the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to:
Cinavia Consumer Information Center, P.O.
Box 86851, San Diego, CA, 92138, USA.
50
VQT3X49
∫ Language code list
Language
Code
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic:
7576
Guarani:
7178
Language
Code
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
Language
Code
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
SC-BTT490P_eng.book 51 ページ
2012年2月22日 水曜日 午前9時1分
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of this device.
Contains FCC ID: MCLT77H330
Contains IC:2878D-T77H330
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm (77/8q) or more
away from person’s body (excluding extremities: hands, wrists, feet and ankles).
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached installation instructions and use only shielded interface
cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-BTT490
Reference
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
THE FOLLOWING APPLIES ONLY IN CANADA.
Product Identification Marking is located on the bottom of the unit.
Java is a registered trademark of Oracle and/or its affiliates.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
VQT3X49
51
SC-BTT490P_eng.book 52 ページ
2012年2月22日 水曜日 午前9時1分
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
VIERA Connect is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
Skype, associated trade marks and logos and the “
” logo are trade marks of Skype Limited.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
“Made for iPod” , and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
52
VQT3X49
SC-BTT490P_eng.book 53 ページ
2012年2月22日 水曜日 午前9時1分
gSOAP Public License 1.3
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(1) MS/WMA
This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of
such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
(3)MS/PlayReady/End User Notices
Content owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require
Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected
content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to
access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
(4) Vorbis
The software license is displayed when “License” in the Setup menu is selected.(> 40)
(5) FLAC, WPA Supplicant
The software licenses are displayed when “License” in the Setup menu is selected.(> 40)
This product incorporates the following software:
For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those
individuals at
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable
copy of the corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest.bdplayer@gg.jp.panasonic.com
Source code is also freely available to you and any other member of the public via our website below.
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
For the software categorized as (5) includes as follows.
1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
2. This product includes software developed by the University of California, Berkeley and its contributors.
3. FreeType code.
4. The Independent JPEG Group's JPEG software.
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent
7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
VQT3X49
53
Reference
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1
SC-BTT490P_eng.book 54 ページ
2012年2月22日 水曜日 午前9時1分
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty period”),
at its option either (a) repair your product with new or refurbished parts, (b)
replace it with a new or a refurbished equivalent value product, or (c) refund
your purchase price. The decision to repair, replace or refund will be made by
the warrantor.
Product or Part Name
Parts
Blu-ray Disc Player, Portable Blu-ray Disc
Player
1 year
Labor
90 days
Blu-ray Home Theater System
1 year
1 year
DVD Player, Portable DVD Player
1 year
90 days
DVD Recorder
1 year
90 days
Rechargeable Batteries (pack)
90 days
Not
Applicable
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
commercial use such as hotel, office, restaurant, or other business or rental use
of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in
a carton box. When shipping Lithium Ion batteries please visit our Web Site at
www.panasonic.com/BatteryHandling as Panasonic is committed to providing
the most up to date information. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A
valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, introduction of sand, humidity or liquids,
Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of January 2012
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
54
VQT3X49
SC-BTT490
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
SC-BTT490P_eng.book 55 ページ
2012年2月22日 水曜日 午前9時1分
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre:
Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Support # contact us # email” on www.panasonic.ca
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
VQT3X49
55
Reference
Dry cell batteries are also excluded from coverage under this warranty.
SC-BTT490P_eng.book 56 ページ
2012年2月22日 水曜日 午前9時1分
Index
A
Audio
Changing audio . . . . . . . . 23
Language . . . . . . . . . . 32, 37
B
BD-Live. . . . . . . . . . . . . . . . .24
D
DLNA . . . . . . . . . . . . . . . . . .31
F
File format . . . . . . . . . . . . . .50
Firmware update . . . . . . . . .19
I
iPod/iPhone . . . . . . . . . . . . .25
L
LAN . . . . . . . . . . . . . . . . . . . .17
Language
Audio . . . . . . . . . . . . . . . . 37
Menu. . . . . . . . . . . . . . . . . 38
On-screen. . . . . . . . . . . . . 38
Soundtrack. . . . . . . . . . . . 32
Subtitle . . . . . . . . . . . . 32, 37
M
Media Renderer . . . . . . . . . 31
Multi User Mode . . . . . . . . . 22
N
Network
Connection. . . . . . . . . . . . 17
Setting . . . . . . . . . . . . 18, 38
P
Pop-up menu . . . . . . . . . . . 24
Q
Quick Start . . . . . . . . . . . . . 40
R
Radio . . . . . . . . . . . . . . . . . .29
Re-master. . . . . . . . . . . . . . .34
Restore Default Settings. . .40
Resume play function . . . . .23
S
Subtitle . . . . . . . . . . . . . . . . .32
U
USB device. . . . . . . . . . . . . . .7
V
VIERA Connect . . . . . . . . . .30
VIERA LinkTM “HDAVI
ControlTM”. . . . . . . . . . . . . . .27
W
Wireless LAN . . . . . . . . . . . .17
24p . . . . . . . . . . . . . . . . .33, 36
3D . . . . . . . . . . . . . . . . . . . . .24
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.
Information on Disposal in other Countries
outside the European Union
This symbol is only valid in the
European Union.
If you wish to discard this
product, please contact your
local authorities or dealer and
ask for the correct method of
disposal.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
®
As an ENERGY STAR Partner, Panasonic
has determined that this product meets the
®
ENERGY STAR guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
Panasonic Consumer
Marketing Company of
North America, Division
of Panasonic Corporation
of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
Panasonic Corporation
Corporate Management
Division For North
America Sales Team
1-61, Shiromi 2-Chome, Chuo-ku,
Osaka City 540-6255, Japan
VQT3X49-3
Panasonic Corporation 2012
Printed in Malaysia
F1211SB3022
Download PDF

advertising