Huawei Embedded Power Supply Catalogue

Huawei Embedded Power Supply Catalogue
Huawei Energy Powering the Future
Huawei Embedded Power Supply Catalogue
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page i
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page ii
With the concept of high efficiency, energy saving and the green future, Huawei Network Energy, based on the deep
understanding of telecom power and customers‘ demands for years, aims at providing the leading embedded power
solution for our customers. Embedded power products cover BMP, open-frame power, cassette power system, server
power and so on, whose output power is from 10W to 3kW. Now these power supplies provide service for more than
150 countries all over the world with Huawei main devices. Huawei Network Energy owes the leading research team,8
power R&D centers around the world, and the capability to serve the customers throughout the world at anytime and
anywhere. Huawei Network Energy dedicates to bring the maximum benefits and business success for our customers
continuously.
This manual introduces the main features and parameters of the BMP, POL, server power supply and communication
custom power. We hope that the manual can help our customers to choose the optimum power solution. The detail
features of the product would be specified in the datasheet.
High Efficiency
Huawei embedded power products are characterized with high efficiency and high power density, and they are advanced
in the power supply industry. With the products, customer competitiveness improves and operating costs of end-users
decrease.
High Reliability
Based on high reliable design, high quality materials control, strict manufacture control and perfect life cycle management,
we produce the products with high reliability. With the perfect telecom power reliability test criterion and environmental
devices, Huawei embedded power along with the main device products serve 70% of the population all around the world,
covering more than 150 countries. The failure rate is lower than average standard in the industry.
High Flexibility
Huawei Network Energy provides all series embedded power systems, and responds quickly to the customized demands.
Huawei embedded power products can meet various requirements by their modular combination, which make customers'
power development easier and faster, and significantly cut the cost of power system design.
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page iii
Contents
RELIABILITY, SAFETY AND EMC
1
PART NUMBERING DESCRIPTION
2
BMP SERIES
4
Standard Brick Series .............................................................................................................. 4
GAS sixteenth-brick series .......................................................................................................... 4
GAE eighth-brick series .............................................................................................................. 6
GDE digital eighth-brick series .................................................................................................... 8
GAQ quarter-brick series .......................................................................................................... 10
GDQ digital quarter-brick series ................................................................................................ 12
GAH half-brick series ............................................................................................................... 14
Nonstandard Brick Series .......................................................................................................16
GAC 15W single output series ................................................................................................... 16
GAC 25W single output series ................................................................................................... 18
GAC 15W dual outputs series ................................................................................................... 20
GAE dual outputs series ........................................................................................................... 22
GAQ dual outputs series ........................................................................................................... 24
GAQ 24V output series ............................................................................................................. 26
RAG ring generator series ......................................................................................................... 28
POL SERIES
30
NAK 20A output series ............................................................................................................. 30
NAJ 40A output series .............................................................................................................. 32
NAD 3D POL series .................................................................................................................. 34
NAS vertical SMT package series ............................................................................................... 37
NAP SIP series ......................................................................................................................... 39
SERVER POWER SERIES
42
Blade server power supply series ............................................................................................... 42
Rack server power supply series ................................................................................................ 44
COMMUNICATION CUSTOM POWER SERIES
46
PAC440D5412-ON power module ............................................................................................. 46
PAC500D5412-CE power module .............................................................................................. 48
PAC1000D5403-CN power module ............................................................................................ 50
PAC2700S54-CB power module ................................................................................................. 52
PAC1600T5453-CB power module ............................................................................................. 54
PAC320D2805-CN power module .............................................................................................. 56
PAC600S12-CE/CB power module .............................................................................................. 58
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 4
RELIABILITY,
SAFETY AND EMC
Reliability, Safety and EMC
Reliability Verification
In order to guarantee the high reliability of power supply products in the whole life cycle, Huawei have carried out strict reliability
verification and screening activities from materials, design to production.
Item
Standard
Conditions
Time
Quantity
HALT
IPC9592
Lower operating Limit: -60°C(-76°F); Upper operating Limit:
110°C(248°F); Destruct Limit: 40G
48 H
4 PCS
Power and Temperature
Cycling Test
IPC9592
-40 - 85°C; 50% - 80% load, Air Flow: 1 - 2m/s; Temperature
Slope: 10 - 15°C/min
1000 H
8 - 16 PCS
High Temperature Operation
Life
IPC9592
50 ±5°C; 50% - 80% load; air flow: 0.5 - 5m/s
1000 H
16 PCS
Temperature Humidity Bias
IPC9592
85°C; 85%RH
1000 H
16 PCS
Dust Test*
GB/T 2423.4
24H Hygroscopic Dust; 48H Humidity and Thermal
72 H
3 PCS
Exposure Test*
GBT14165-2008
Field Testing in HaiNan and ChongQing
1 Year
24 PCS
Airborne Contaminants Test*
GR-63
(Extension test time)
Outdoor 30°C; 70%RH; 20ppb Cl2, 100ppb H2S 200ppb
NO2, 200ppb SO2
1000 H
110 PCS
Sulfuration Corrosion Test*
GB/T 2423.20
60°C; 70%RH; 100PPM H2S
200 H
3200 PCS
High Temperature Operating
Life Screening Test
IPC9592
Thermal Spot Temperature: 90 - 100°C; Rating Input Voltage;
50% - 80% Load; Ambient Temperature: 40 - 60°C, Air Flow:
0.5 - 5m/s
24H - 12H
- 8H - 4H
All Power
Model Products
Ongoing Reliability Auditing
Test
IPC9592
Thermal Spot 90 - 100°C; Rating Input Voltage; 50% - 80%
Load; Ambient Temperature 40 - 60°C; Air Flow: 0.5 - 5m/s
336 H
≥48PCS in the
life cycle
Temperature Cycling
Auditing Test*
IPC9592
Ambient Temperature: -40 - 55°C; Rating Input Voltage,
50% Load; Air Flow: 1.0-2.0m/s; 5 cycles; Temperature
Slope: 15°C/min
10 H
8 - 16PCS/per
task
* The test items with asterisk are optional in the design and production process according to product applications and customers’ requirements.
Safety and EMC
IEC/EN/UL60950-1 second edition
UL and TUV/CE certification
EN55022, EN55024, EN300386, GB9254, GB17626 (an external filtering circuit required)
All non metal material to meet the corresponding flame retardant grade
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 1
1
PART NUMBERING
DESCRIPTION
Part Numbering Description
BMP Series
GAQ
xxx
S
xxx
B
P
-XX
Main Series
Output Current
Outputs
Output Voltage
Baseplate
ON/OFF Logic
Expand Code
B: baseplate,omit
this letter for no
baseplate.
P: positive logic,
omit this letter for
negative logic.
One digit and one
letter
One digit: pin
length, omit
this number for
3.8mm.
4:4.8mm
One letter: omit
this letter for no
meaning, “P” in
digital module for
PMBus interface.
First letter
G: 48Vin series
Second letter
A: analog module
B: analog upgrade
products
D: digital module
Third letter
H: half-brick
Q: quarter-brick
E: eighth-brick
S: sixteenth-brick
C: nonstandardBrick
e.g.
0A5: 0.5A
05: 5A
100: 100A
Output Power
e.g.
50: 50W
100: 100W
S: single output
Outputs
D: dual outputs
e.g.
0V9: 0.9V
3V3: 3.3V
05: 5V
Output Voltage
Two digits represents
a positive and
negative voltage.
e.g.
D12: ±12V
Four digits
represents two
different voltages,
the higher in the
front, and the
lower behind.
e.g.
1212: 12V and 1.2V
e.g. GDQ33S12B-P
Isolated digital quarter-brick module with baseplate, rating output 12V/33A, compatible with the PMBus1.1 communication
protocol.
e.g. GAQ100D1233
Isolated analog quarter-brick module without baseplate, rating outputs 12V and 3.3V, total rating output power 100W.
Special instructions for RAG 40 S 75 P:
Ring generator, Po 40W, rating output 75Vac, positive logic
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 2
PART NUMBERING
DESCRIPTION
POL Series
NAJ
XX
S
XXX
B
-XX
Main Series
Input Voltage
Outputs
Output Current
Baseplate
Expand Code
First letter
N: non-isolated series
Second letter
A: analog module
D: digital module
Third letter
K: 24×13.5×12mm
package
J: 28×24×12mm
package
P: SIP series
S: vertical SMT
package
D: 3D architecture
e.g.
03: 3.3V
05: 5V
12: 12V
S: single output
D: dual outputs
e.g.
0A5: 0.5A
05: 5A
50: 50A
B: baseplate, omit
this letter for no
baseplate.
One to two digits
or letters, reflecting
the small differences
between products in
same platform, omit
for no meaning.
e.g. NAJ12S40-A
Analog POL module without baseplate, rating input voltage is 12V, single output, rating output current 40A.
Server Power and Communication Custom Series
PAC
XXXX
S
XXXX
—X
X
Main Series
Output Power
Outputs
Output Voltage
Structure
Heat Dissipation
First letter
P: embedded power
Last two letters
AC: AC input
DC: DC input
e.g.
50: 50W
100: 100W
S: single output
Outputs
D: dual outputs
T: triple outputs
e.g.
0V9: 0.9V
3V3: 3.3V
05: 5V
O: open frame
C: cassette
B: front-to-back
airflow
E: back-to-front
airflow
N: Air cooling
Output Voltage
Two digits represents
a positive and
negative voltage.
e.g.
D12: ±12V
Four digits represents
two different voltages,
the higher in the
front, and the lower
behind.
e.g.
5312: 53.5V and 12V
Triple outputs, choose
the two main outputs
only in the description
e.g. PAC2700S12-CB
Cassette AC-DC power supply, output power 2700W, output voltage 12V, front-to-back airflow
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page
3
3
BMP SERIES
Standard Brick Series
GAS Sixteenth-Brick Series
Introduction
The GAS series DC-DC converter is high-efficiency and power density standard 1/16 brick isolated
module, the output power from 30W to 90W, the output voltage covering 1.2V, 3.3V and 12V three
levels. All models support primary ON/OFF control, the 1.2V and 3.3V output models have the functions
of remote Sense and Trim. This series which conform to the RoHS6 requirement can be used in the
fields of communication, data transmission and distributed power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
ALL
0.2%Vo
Vin=36 - 75V, Imax
Output load regulation
ALL
0.2%Vo
Vin=48V, Iout=0 - Imax
Regulated voltage
ALL
3%Vo
GBS25S1V2, GAS35S1V2B
100mV
OTHER
200mV
Output ripple and noise (PK-PK)
Output voltage adjustment
range (trim)
GAS08S12B
OTHER
NA
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
Without TRIM function
80% - 110%
-
36 - 75V
-
Input characteristics
Operating input voltage
ALL
Maximum input current
GBS25S1V2, GAS35S1V2B,
GBS15S3V3, GBS04S12
2A
GAS25S3V3B, GAS08S12B
3.5A
GBS25S1V2
20mA
GBS35S1V2B, GBS04S12
30mA
GAS15S3V3, GAS25S3V3B
51mA
GAS08S12B
25mA
Input reflected ripple current
(PK-PK)
Vin=36V, Iout=Imax
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
Features
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense *
Output voltage Trim *
Output OVP
Over current Protection
*GAS08S12B without this function
Over temperature Protection
ALL
Turn on: 31 - 36V
Turn off: 30 - 35V
GBS25S1V2, GBS15S3V3,
GBS04S12
120% - 150%
GAS35S1V2B
115% - 167%
GAS25S3V3B
115% - 150%
GAS08S12B
115% - 135%
GBS25S1V2, GBS15S3V3,
GBS04S12
110% - 160%
GAS08S12B
110% - 180%
OTHER
110% - 150%
GBS15S3V3
100 - 130°C
GAS35S1V2B
110 - 130°C
OTHER
105 - 125°C
Hysteresis: 1 - 3V
Hiccup
Hiccup
Converter will reset when over
temperature condition is removed
Hysteresis: 10°C
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
ALL
Operating ambient temperature
ALL
-40 - 85°C
-
Storage temperature
ALL
-55 - 125°C
-
ALL
-0.7 - 1.2V
Negative logic
80V
-
100V
Other characteristics
Remote on/off voltage
Low level
High level
3.5 - 12V
Input-to-output Isolation voltage ALL
Mean time between failures
(MTBF)
ALL
1500VDC
1.5 million hours
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40°C
4
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 4
BMP SERIES
Standard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GBS25S1V2
36 - 75V
1.2V
25A
30W
88.0%
GAS35S1V2B
36 - 75V
1.2V
35A
42W
85.5%
GBS15S3V3
36 - 75V
3.3V
15A
50W
91.0%
GAS25S3V3B
36 - 75V
3.3V
25A
82.5W
91.0%
GBS04S12
36 - 75V
12V
4.2A
50W
91.5%
GAS08S12B
36 - 75V
12V
7.5A
90W
93.0%
Mechanical Diagram
Unit: mm [in.]
3
4
5
2
6
7
33.9[1.33]
Top View
8
7.62[0.300]
15.24[0.600]
23.1[0.91]
23.7[0.93]
1
27.94[1.100]
33.9[1.33]
Bottom View
5-Φ2.00[0.080]
3.80[0.150]
2-Φ2.50[0.100]
5-Φ1.00[0.040]
10.0[0.39]
3.80[0.150]
12.7[0.50]
2-Φ1.50[0.060]
Side View
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
5
Sense(-)
2
ON/OFF
6
Trim
3
Vin(-)
7
Sense(+)
4
Vout(-)
8
Vout(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAS08S12B without PIN5, PIN6 and PIN7
5
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 5
BMP SERIES
Standard Brick Series
GAE Eighth-Brick Series
Introduction
The GAE series DC-DC converter is high-efficiency and power density standard 1/8 brick isolated
module. This series contain 9 modules, output power from 25W to 180W, output voltage covering 3.3V,
5V and 12V three levels. All models support primary ON/OFF control, remote sense and Trim function.
This series which conform to the RoHS6 requirement can be used in the fields of communication, data
transmission and distributed power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
Output load regulation
Regulated voltage
Output ripple and noise (PK-PK)
Output voltage adjustment
range (trim)
Input characteristics
Operating input voltage
Features
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense
Output voltage Trim
Maximum input current
Input reflected ripple current
(PK-PK)
GAE08S3V3, GAE15S3V3,
GAE30S3V3
GAE10S05, GBE04S12,
GAE08S12, GAE08S12B
GAE15S12, GAE15S12B
GAE10S05
GAE15S12, GAE15S12B
OTHER
GAE10S05
OTHER
GAE08S3V3, GAE10S05,
GAE08S12, GAE08S12B,
GAE15S12, GAE15S12B
GAE15S3V3, GAE30S3V3,
GBE04S12
ALL
ALL
GAE08S3V3
GAE15S3V3
GAE30S3V3
GAE10S05
GBE04S12
GAE08S12, GAE08S12B
GAE15S12, GAE15S12B
GAE08S3V3
GAE15S3V3, GAE08S12,
GAE08S12B
GAE30S3V3
GAE10S05
GAE15S12, GAE15S12B
0.1%Vo
0.2%Vo
0.3%Vo
0.5%Vo
0.3%Vo
0.2%Vo
2%Vo
3%Vo
Vin=36 - 75V, Imax
Vin=48V, Iout=0 - Imax
The whole range of Vin, Iout and TA
50mV
Oscilloscope bandwidth: 20 MHz
100mV
80% - 110%
36 - 75V
1.5A
1.8A
3.7A
2.5A
2.0A
3.4A
8A
5.6mA
Vin=36V, Iout=7.6A
Vin=36V, Iout=15A
Vin=36V, Iout=30A
Vin=36V, Iout=10A
Vin=36V, Iout=4A
Vin=36V, lout=8A
Vin=36V, lout=15A
20mA
30mA
14mA
50mA
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
ALL
Output OVP
Over current Protection
ALL
ALL
Turn on: 31 - 36V
Turn off: 30 - 35V
120% - 150%
105% - 168%
Over temperature Protection
ALL
105 - 125°C
ALL
80V
100V
-40 - 85ºC
-55 - 125ºC
-
-0.7 - 1.2V
3.5 - 12V
1500VDC
Negative logic
Hysteresis: 1 - 3V
Hiccup
Hiccup
Converter will reset when over
temperature condition is removed
Hysteresis: 10°C
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
Operating ambient temperature
Storage temperature
Other characteristics
Remote on/off voltage
Low level
High level
ALL
ALL
ALL
Input-to-output Isolation voltage ALL
Mean time between failures
ALL
(MTBF)
1.5 million hours
-
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
6
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 6
BMP SERIES
Standard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAE08S3V3
36 - 75V
3.3V
7.6A
25W
90.0%
GAE15S3V3
36 - 75V
3.3V
15A
50W
92.0%
GAE30S3V3
36 - 75V
3.3V
30A
100W
94.0%
GAE10S05
36 - 75V
5V
10A
50W
92.5%
GBE04S12
36 - 75V
12V
4A
48W
91.5%
GAE08S12
36 - 75V
12V
8A
100W
94.0%
GAE08S12B
36 - 75V
12V
8A
100W
94.0%
GAE15S12
36 - 75V
12V
15A
180W
94.0%
GAE15S12B
36 - 75V
12V
15A
180W
94.0%
Mechanical Diagram
Unit: mm [in.]
3
4
5
6
7
8
2
50.80[2.000]
57.9[2.28]
Bottom View
6-Φ1.00[0.040]
6-Φ2.00[0.080]
6-Φ2.00[0.080]
2-Φ1.50[0.060]
2-Φ2.50[0.100]
3.80[0.150]
6-Φ1.00[0.040]
9.7[0.38]
3.80[0.150]
Top View
12.7[0.50]
7.62[0.300]
15.24[0.600]
22.9[0.90]
1
2-Φ2.50[0.100]
2-Φ1.50[0.060]
Side View
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
5
Sense(-)
2
ON/OFF
6
Trim
3
Vin(-)
7
Sense(+)
4
Vout(-)
8
Vout(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
7
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 7
BMP SERIES
Standard Brick Series
GDE Digital Eighth-Brick Series
Introduction
The GDE series DC-DC converter is high-efficiency and power density 1/8 brick isolation module,
rating output voltage 12V, output power 240W. This series provide the standard 1/8 brick version and
the PMBus compatible version. The latter is compatible with the PMBus1.1 communication protocol,
backward compatible with the I²C/SMBus protocol, and providing Pre-bias, output monitoring and
current sharing functions. The GDE series conform to the RoHS6 requirement.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output voltage range
ALL
11.64 - 12.36V
Iout=10A, Vin=40 - 75V
10.8 - 12.36V
Iout=10A, Vin=36 - 40V, Vo changes with the Vin
0.2%Vo
Vin=40 - 75V, Iout=20A
10%Vo
Vin=36 - 40V, Iout=20A
Output line regulation
ALL
Output load regulation
ALL
3%Vo
The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
ALL
200mV
Oscilloscope bandwidth: 20 MHz
70% - 110%
VIN=45 - 75V, Adjusted by PMBus
70% - 100%
VIN=36 - 45V, Adjusted by PMBus
Output voltage adjustment range (trim) GDE20S12B-P
Input characteristics
Operating input voltage
ALL
36 - 75V
Maximum input current
ALL
10A
-
Input reflected ripple current (PK-PK)
ALL
100mA
Input UVP
ALL
Turn on: 31 - 35.5V
Turn off: 30 - 35V
Output OVP
ALL
117% - 133%
Hiccup
Over current Protection
ALL
110% - 140%
Hiccup
Over temperature Protection
ALL
110 -130ºC
Vin=0 - 75V, Iout=20A
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Primary on/off control
Secondary on/off control *
Output voltage digital Trim *
Input voltage monitoring *
Output voltage and current
monitoring *
Output power monitoring and
alarm *
Pre-bias function *
Dual modules current sharing *
Hysteresis: 1 - 3V
Converter will reset when over temperature
condition is removed
Hysteresis: 10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
ALL
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
Primary remote control
Low level
High level
ALL
-0.7 - 1.2V
Negative logic
secondary remote control
Low level
High level
GDE20S12B-P
Input-to-output Isolation voltage
ALL
1500VDC
Mean time between failures (MTBF)
ALL
1.5 million hours
80V
-
100V
Other characteristics
2.8 - 8V
*GDE20S12B without this function
0 - 0.8V
Positive logic
2.1 - 3.3V
Telcordia SR332, 80% load, 300LFM, TA=40ºC
PMBus measurement accuracy
Input voltage measurement accuracy
GDE20S12B-P
±1V
Output voltage measurement accuracy
GDE20S12B-P
±0.2V
Output current measurement accuracy
GDE20S12B-P
±1A
Temperature measurement accuracy
GDE20S12B-P
±5ºC
Vin=36 - 75V, Iout=0 - 20A, TA=-40 - 85ºC
Vin=36 - 75V, Iout=0 - 20A, TA=-40 - 125ºC
8
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 8
BMP SERIES
Standard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
PMBus Compatibility
GDE20S12B-P
36 - 75V
12V
20A
240W
95.0%
Y
GDE20S12B
36 - 75V
12V
20A
240W
95.0%
N
Mechanical Diagram
Unit: mm [in.]
55.02[2.166]
PMBUS Interface
50.80[2.000]
3
6
7
8
9
10
11
12
13
4
2
1
15.24[0.600]
3.81[0.150]
2.54[0.100]
3X2.54(=7.62[0.300])
53.34[2.100]
2.54[0.100]
Top View
15.24[0.600]
22.9[0.90]
57.9[2.28]
5
Bottom View
3.80[0.150]
12.7[0.50]
3-Φ1.00[0.040]
3-Φ2.00[0.080]
2-Φ2.50[0.100]
2-Φ1.50[0.060]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
8
PMBus_ALT
2
ON/OFF
9
SA1
3
Vin(-)
10
PMBus_CTL
4
Vout(-)
11
ISHARE
5
Vout(+)
12
PMBus_SCL
6
SGND
13
PMBus_SDA
7
SAO
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin1 to Pin5: X.XX±0.10mm[X.XXX±0.004 in.]
Pin6 to Pin13: 0.64±0.05mm[0.025±0.002 in.]
* GDE20S12B without PMBUS interface
9
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 9
BMP SERIES
Standard Brick Series
GAQ Quarter-Brick Series
Introduction
The GAQ series DC-DC converter is high-efficiency and power density standard 1/4 brick isolated
module. This series contain 18 modules, the output power from 36W to 450W, the output voltage
covering 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V, 53.5V and 96V nine levels. All modules support primary
ON/OFF control, remote Sense and Trim function. This series which conform to the RoHS6 requirement
can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
Output load regulation
Regulated voltage
Output ripple and noise (PK-PK)
Output voltage adjustment
range (trim)
Input characteristics
Operating input voltage
Features
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense *
Output voltage Trim *
*GBQ18S12 without this function
Maximum input current
Input reflected ripple current
(PK-PK)
GBQ10S12, GBQ10S12B, GBQ18S12,
GAQ01S96B
OTHER
GAQ40S1V8, GAQ25S12B, GAQ02S54B
GBQ10S12, GBQ10S12B, GBQ18S12,
GAQ01S96B
OTHER
GAQ02S54B
OTHER
GAQ30S1V2, GAQ60S1V2, GAQ40S1V5,
GAQ40S1V8, GAQ10S12, GBQ18S12,
GAQ25S3V3B, GBQ10S12
GAQ40S3V3, GAQ40S3V3B, GAQ25S12B
GAQ40S2V5, GAQ02S54B, GBQ20S05B,
GAQ37S12B
GAQ20S05, GBQ10S12B
GAQ01S96B
GAQ25S12B, GAQ37S12B
GAQ02S54B
GAQ01S96B
OTHER
ALL
GAQ30S1V2
GAQ60S1V2
GAQ40S1V5
GAQ40S1V8
GAQ40S2V5
GAQ25S3V3B
GAQ40S3V3/GAQ40S3V3B
GAQ20S05
GAQ10S12, GAQ01S96B
GBQ20S05, GBQ10S12, GBQ10S12B
GBQ18S12
GAQ25S12B
GAQ37S12B
GAQ02S54B
GAQ02S54B
GBQ10S12, GBQ10S12B
GAQ01S96B
OTHER
1%Vo
Vin=36 - 75V, Imax
0.2%Vo
0.5%Vo
1%Vo
0.3%Vo
1.5%Vo
3%Vo
Vin=48V, Iout=0 - Imax
The whole range of Vin, Iout and TA
50mV
80mV
Oscilloscope bandwidth: 20 MHz
100mV
120mV
2000mV
90% - 110%
67% - 106%
90% - 105%
80% - 110%
36 - 75V
1.3A
2.8A
2A
2.4A
3.5A
3.2A
4.05A
3.4A
4A
5A
8A
10A
16A
3.5A
26mA
50mA
30A
20mA
-
Vin=36V, Iout=30A
Vin=36V, Iout=60A
Vin=36V, Iout=40A
Vin=36V, Iout=40A
Vin=36V, Iout=40A
Vin=36V, Iout=25A
Vin=36V, Iout=40A
Vin=36V, Iout=20A
Vin=36V, Imax
Vin=36V, Imax
Vin=36V, Iout=18A
Vin=36V, Iout=25A
Vin=36V, Iout=37A
Vin=36V, Iout=1.5A
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
ALL
Output OVP
Over current Protection
ALL
ALL
Over temperature Protection
ALL
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
Operating ambient temperature
Storage temperature
Other characteristics
Remote on/off voltage
Low level
High level
ALL
ALL
ALL
ALL
Input-to-output Isolation voltage
GAQ25S12B
OTHER
Mean time between failures
(MTBF)
ALL
Turn on: 31 - 36V
Hysteresis: 1 - 3V
Turn off: 30 - 35V
120% - 150%
Hiccup
110% - 150%
Hiccup
Converter will reset when over
100 - 130ºC
temperature condition is removed
Hysteresis: 10ºC
80V
100V
-40 - 85ºC
-55 - 125ºC
-
-0.7 - 1.2V
3.5 - 12V
Negative logic
1500VDC
1.5 million hours
-
Functional isolation
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
10
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 10
BMP SERIES
Standard Brick Series
Model Selector
Model
GAQ30S1V2
GAQ60S1V2
GAQ40S1V5
GAQ40S1V8
GAQ40S2V5
GAQ25S3V3B
GAQ40S3V3
GAQ40S3V3B
GAQ20S05
GBQ20S05B
GAQ10S12
GBQ10S12
GBQ10S12B
GBQ18S12
GAQ25S12B
GAQ37S12B
GAQ02S54B
GAQ01S96B
Input Voltage
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
Output Voltage
1.2V
1.2V
1.5V
1.8V
2.5V
3.3V
3.3V
3.3V
5V
5V
12V
12V
12V
12V
12V
12V
53.5V
96V
Output Current
30A
60A
40A
40A
40A
25A
40A
40A
20A
20A
10A
10A
10A
18A
25A
37A
1.5A
1A
Output Power
36W
72W
60W
72W
100W
82.5W
132W
132W
100W
100W
120W
120W
120W
216W
300W
450W
80W
96W
Efficiency
89.5%
89.0%
90.5%
91.5%
92.0%
93.5%
93.5%
93.5%
93.5%
92.5%
94.0%
92.0%
92.0%
93.0%
95.0%
95.5%
92.5%
87.0%
Mechanical Diagram
Unit: mm [in.]
4
5
6
7
8
2
1
4-M2[0.1]
50.80[2.000]
57.9[2.28]
Top View
Bottom View
10.0 [0.40]
6-Φ2.00[0.080] 2-Φ2.50[0.100]
6-Φ1.00[0.040] 2-Φ1.50[0.060]
3.80 [0.150]
3.80[0.150]
12.7[0.50]
54.00[2.126]
15.24[0.600]
36.8[1.45]
3
7.60[0.299]
47.24[1.860]
15.24[0.600]
26.16[1.030]
33.00[1.299]
M3[0.1]
6-Φ2.00[0.080]
2-Φ2.50[0.100]
6-Φ1.00[0.040]
2-Φ1.50[0.060]
Side View
Side View
Pin Description
Pin No.
1
2
3
4
Function
Vin(+)
ON/OFF
Vin(-)
Vout(-)
Pin No.
5
6
7
8
Function
Sense(-)
Trim
Sense(+)
Vout(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
GBQ18S12 without PIN5, PIN6 and PIN7
11
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 11
BMP SERIES
Standard Brick Series
GDQ Digital Quarter-Brick Series
Introduction
The GDQ series DC-DC converter is high-efficiency and power density 1/4 brick isolation module,
rating output voltage 12V. This series provide the standard 1/4 brick version and the PMBus compatible
version. The latter is compatible with the PMBus1.1 communication protocol, backward compatible
with the I²C/SMBus protocol, and providing Pre-bias, output monitoring and current sharing functions.
The GDQ series conform to the RoHS6 requirement.
Specification
Model
Parameter
Notes & Conditions
11.82 - 12.18V
11.64 - 12.36V
10.8 - 12.36V
0.3%Vo
0.2%Vo
10%Vo
5%Vo
0.3%Vo
200mV
70% - 110%
70% - 100%
Iout=27A; Vin=48V
Iout=16.5A, Vin=40 - 75V
Iout=16.5A, Vin=36 - 40V, Vo changes with the Vin
Vin=40 - 60V, Iout=54A
Vin=40 - 75V, Iout=33A
Vin=36 - 40V, Iout=33A
Output characteristics
GDQ54S12B
Output voltage range
OTHER
GDQ54S12B
Output line regulation
Output load regulation
Output ripple and noise (PK-PK)
OTHER
GDQ54S12B
OTHER
ALL
Output voltage adjustment range (trim) GDQ33S12B-P
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
VIN=45 - 75V, Adjusted by PMBus
VIN=36 - 45V, Adjusted by PMBus
Input characteristics
Operating input voltage
Maximum input current
Input reflected ripple current (PK-PK)
GDQ54S12B
OTHER
GDQ54S12B
OTHER
GDQ54S12B
OTHER
GDQ54S12B
Input UVP
•
•
•
Vin=0 - 60V, Iout=54A
Vin=0 - 75V, Iout=33A
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Features
•
•
•
•
•
•
•
•
•
•
40 - 60V
36 - 75V
20A
14A
100mA
200mA
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Primary on/off control
Secondary on/off control
Output voltage digital Trim *
Input voltage monitoring *
Output voltage and current
monitoring *
Output power monitoring and
alarm *
Pre-bias function *
Dual modules current sharing *
*GDQ33S12&GDQ54S12B without this
function
OTHER
Output OVP
Over current Protection
Over temperature Protection
GDQ54S12B
OTHER
GDQ54S12B
OTHER
ALL
Turn on: 35 - 39V
Turn off: 33 - 37V
Turn on: 31 - 35.5V
Turn off: 30 - 35V
115% - 40%
117% - 133%
110% - 140%
110% - 127%
110 -130ºC
Hysteresis: 1 - 3V
Hysteresis: 1 - 3V
Hiccup
Hiccup
Converter will reset when over temperature condition
is removed
Hysteresis: 10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
Operating ambient temperature
Storage temperature
Other characteristics
Primary remote control
Low level
High level
secondary remote control
Low level
High level
Input-to-output Isolation voltage
Mean time between failures (MTBF)
PMBus measurement accuracy
Input voltage measurement accuracy
Output voltage measurement accuracy
Output current measurement accuracy
Output power measurement accuracy
Temperature measurement accuracy
GDQ54S12B
OTHER
ALL
ALL
62V
70V
-
80V
100V
-40 - 85ºC
-55 - 125ºC
-
GDQ54S12B
-0.7 - 1.2V
3.5 - 12V
OTHER
-0.7 - 1.2V
2.8 - 8V
GDQ33S12B-P
ALL
ALL
GDQ33S12B-P
GDQ33S12B-P
GDQ33S12B-P
GDQ33S12B-P
GDQ33S12B-P
0 - 0.8V
2.1 - 3.3V
1500VDC
1.5 million hours
±1V
±0.2V
±1A
±12.56W
±5ºC
-
Negative logic
Positive logic
Telcordia SR332, 80% load, 300LFM, TA=40ºC
Vin=36 - 75V, Iout=0 - 33A, TA=-40ºC - 85ºC
Vin=36 - 75V, Iout=0 - 33A, TA=-40ºC - 125ºC
12
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 12
BMP SERIES
Standard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
PMBus Compatibility
GDQ33S12B-P
36 - 75V
12V
33A
400W
96.0%
Y
GDQ33S12B
36 - 75V
12V
33A
400W
96.0%
N
GDQ54S12B
40V - 60V
12V
54A
650W
96.0%
N
Mechanical Diagram
Unit: mm [in.]
PMBUS Connector
47.24[1.860]
50.80[2.000]
3.80[0.150]
12.7[0.50]
1
2-Φ2.50[0.100]
3-Φ1.00[0.040]
2-Φ1.50[0.060]
13
15.24[0.600]
3.81[0.150]
2.54[0.100]
Bottom View
3-Φ2.00[0.080]
12
5
3X2.54(=7.62[0.300])
Top View
11
2
2.54[0.100]
3-M2.00[0.080]
9
10
4
3
15.24[0.600]
4-M3.00[0.120]
8
36.8[1.45]
33.00[1.299]
57.9[2.28]
26.16[1.030]
54.00[2.126]
7
6
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
8
PMBus_ALT
2
ON/OFF
9
SA1
3
Vin(-)
10
PMBus_CTL
4
Vout(-)
11
ISHARE
5
Vout(+)
12
PMBus_SCL
6
SGND
13
PMBus_SDA
7
SAO
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin1 to Pin5: X.XX±0.10mm[X.XXX±0.004 in.]
Pin6 to Pin13: 0.64±0.05mm[0.025±0.002 in.]
* GDQ33S12B and GDQ54S12B without PMBUS interface
13
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 13
BMP SERIES
Standard Brick Series
GAH Half-Brick Series
Introduction
The GAH series DC-DC converter is high-efficiency and power density standard 1/2 brick isolated
module. This series contain 8 modules, output power from 100W to 450W, output voltage covering
3.3V,5V,12V and 48V four levels. All modules support primary ON/OFF control, remote Sense and
Trim function. This series which conform to the RoHS6 requirement can be used in the fields of
communication, data transmission and distributed power supply system.
Specification
Output characteristics
Output line regulation
Output load regulation
Regulated voltage
Output ripple and noise (PK-PK)
Output voltage adjustment
range (trim)
Model
Parameter
ALL
GAH30S3V3B, GAH60S3V3B,
GAH30S05B, GAH12S28B,
GAH16S28B
GAH10S12B, GAH30S12B,
GAH03S48BP
GAH30S3V3B, GAH60S3V3B
OTHER
GAH30S3V3B, GAH60S3V3B,
GAH03S48BP, GAH30S12B
GAH30S05B, GAH10S12B,
GAH12S28B, GAH16S28B
GAH30S3V3B, GAH60S3V3B
GAH12S28B
GAH16S28B
OTHER
0.3%Vo
Notes & Conditions
Vin=36 - 75V, Imax
0.3%Vo
Vin=48V, Iout=0 - Imax
0.5%Vo
1.5%Vo
3%Vo
The whole range of Vin, Iout and TA
150mV
Oscilloscope bandwidth: 20 MHz
100mV
80% - 110%
60% - 110%
60% - 118%
90% - 110%
-
Input characteristics
Operating input voltage
Features
•
•
•
•
•
•
•
•
Maximum input current
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense
Output voltage Trim
Input reflected ripple current
(PK-PK)
GAH16S28B
OTHER
GAH30S3V3B
GAH60S3V3B
GAH30S05B
GAH10S12B
GAH30S12B
GAH03S48BP
GAH12S28B
GAH16S28B
GAH30S3V3B
GAH60S3V3B
GAH30S05B
GAH10S12B
GAH30S12B
GAH03S48BP
GAH12S28B
GAH16S28B
36 - 60V
36 - 75V
4A
7.5A
5.5A
5A
11A
5.5A
15A
16A
15mA
20mA
66mA
17mA
25mA
50mA
150mA
600mA
Vin=36V, Iout=30A
Vin=36V, Iout=60A
Vin=36V, Iout=30A
Vin=36V, Iout=10A
Vin=36V, Iout=30A
Vin=36V, Iout=3.2A
Vin=36V, Iout=12.5A
Vin=36V, Iout=16A
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
ALL
Output OVP
ALL
GAH10S12B, GAH03S48BP,
GAH12S28B
OTHER
Over current Protection
Over temperature Protection
Turn on: 31 - 36V
Turn off: 30 - 35V
120% - 150%
120% - 180%
Hysteresis: 1 - 3V
Hiccup
Hiccup
110% - 150%
GAH10S12B, GAH30S12B
120 - 130ºC
OTHER
100 - 130ºC
Converter will reset when over
temperature condition is removed
Hysteresis: 10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
GAH16S28B
OTHER
Operating ambient temperature
Storage temperature
Other characteristics
ALL
ALL
Remote on/off voltage
Low level
High level
GAH03S48BP
OTHER
Input-to-output Isolation voltage ALL
Mean time between failures
ALL
(MTBF)
65V
80V
-
80V
100V
-40 - 85ºC
-55 - 125ºC
-
-0.7 - 1.2V
3.5 - 12V
-0.7 - 1.2V
3.6 - 12V
1500VDC
1.5 million hours
Positive logic
Negative logic
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
14
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 14
BMP SERIES
Standard Brick Series
Model Selector
Model
GAH30S3V3B
GAH60S3V3B
GAH30S05B
GAH10S12B
GAH30S12B
GAH03S48BP
GAH12S28B
GAH16S28B
Input Voltage
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 75V
36 - 60V
Output Voltage
3.3V
3.3V
5V
12V
12V
48V
28V
28V
Output Current
30A
60A
30A
10A
30A
3.125A
12A
16A
Output Power
100W
200W
150W
120W
360W
150W
350W
450W
Efficiency
91.5%
92.5%
92.5%
91.5%
95.5%
93.0%
92.0%
93.0%
Mechanical Diagram
Unit: mm [in.]
57.9[2.28]
6
7
2
8
1
9
61.0[2.40]
3
50.80[2.000]
5
12.7[0.50]
4
3.80[0.150]
15.24[0.600]
35.56[1.400]
48.26[1.900]
4-Φ4.20[0.165]
Bottom View
7-Φ1.00[0.040]
2-Φ2.00[0.080]
7-Φ2.00[0.080]
2-Φ3.00[0.120]
3.80[0.150]
11.4[0.45]
Top View
7-Φ1.00[0.040]
2-Φ2.00[0.080]
7-Φ2.00[0.080]
2-Φ3.00[0.120]
Side View
Side View
Pin Description
Pin No.
1
2
3
4
5
Function
Vin(+)
ON/OFF
CASE
Vin(-)
Vout(-)
Pin No.
6
7
8
9
Function
Sense(-)
Trim
Sense(+)
Vout(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAH30S3V3B, GAH30S12 and GAH60S3V3B without PIN3
15
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 15
BMP SERIES
Nonstandard Brick Series
GAC 15W Single Output Series
Introduction
The GAC 15W single output series use open-frame and industry standard package, effectively saving
board space, the output voltage including 3.3V, 5V, 12V and 96V four levels, the efficiency more than
85%. All modules support primary ON/OFF control and Trim function. This series which conform to
the RoHS6 requirement can be used in the fields of communication, data transmission and distributed
power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
Output load regulation
Regulated voltage
GAC0A1S96
0.5%Vo
OTHER
0.7%Vo
ALL
0.5%Vo
GAC0A1S96
3%Vo
OTHER
0.5%Vo
Output ripple and noise (PK-PK)
ALL
100mV
Output voltage adjustment
range (trim)
GAC0A1S96
OTHER
Vin=36 - 75V, Imax
Vin=48V, Iout=0 - Imax
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
NA
-
90% - 110%
-
36 - 75V
-
Input characteristics
Features
Operating input voltage
•
•
•
•
•
•
Maximum input current
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Remote on/off control *
Output voltage Trim *
*GAC0A1S96 without this function
Input reflected ripple current
(PK-PK)
ALL
GAC05S3V3, GAC01S12
0.5A
GAC03S05
0.8A
GAC0A1S96
0.4A
GAC05S3V3, GAC01S12,
GAC0A1S96
20mA
GAC03S05
30mA
Vin=36V, Imax
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
Output OVP
Over current Protection
Over temperature Protection
ALL
GAC0A1S96
Turn on: 31 - 36V
Turn off: 30 - 35V
110%
Hysteresis: 1 - 3V
Constant voltage mode
OTHER
120% - 150%
Hiccup
GAC0A1S96
110% - 200%
Hiccup
OTHER
110% - 170%
ALL
NA
-
80V
-
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
ALL
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
NA
-
100V
Other characteristics
GAC0A1S96
Remote on/off voltage
Low level
High level
OTHER
-0.7 - 1.2V
Negative logic
3.5 - 12V
Input-to-output Isolation voltage ALL
Mean time between failures
(MTBF)
1500VDC
GAC0A1S96
2.5 million hours
OTHER
1.5 million hours
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
16
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 16
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAC05S3V3
36 - 75V
3.3V
4.5A
15W
87.5%
GAC03S05
36 - 75V
5V
3A
15W
88.0%
GAC01S12
36 - 75V
12V
1.25A
15W
87.5%
GAC0A1S96
36 - 75V
96V
0.1A
10W
85.0%
Mechanical Diagram
Unit: mm [in.]
2
5
5.08[0.200]
3
25.4[1.00]
6
20.32[0.800]
1
4
20.32[0.800]
50.8[2.00]
10.5[0.41]
Top View
3.80[0.150]
5-Φ1.00[0.040]
5-Φ2.00[0.080]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
ON/OFF
4
Vout(+)
2
Vin(-)
5
Trim
3
Vin(+)
6
Vout(-)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAC0A1S96 without Pin1 and Pin5
17
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 17
BMP SERIES
Nonstandard Brick Series
GAC 25W Single Output Series
Introduction
The GAC 25W single output series use open-frame and industry standard package, effectively saving
board space, the output voltage including 3.3V, 5V and 12V three levels, the efficiency more than 86%.
All modules support primary ON/OFF control and Trim function. This series which conform to the RoHS6
requirement can be used in the fields of communication, data transmission and distributed power
supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
GBC06S3V3P
Output line regulation
Output load regulation
Regulated voltage
Output ripple and noise (PK-PK)
voltage adjustment range (trim)
0.2%Vo
GBC05S05P
1%Vo
GAC02S12P
0.1%Vo
GBC06S3V3P
0.5%Vo
GBC05S05P
1%Vo
GAC02S12P
0.2%Vo
ALL
3%Vo
GBC06S3V3P
100mV
GBC05S05P
75mV
GAC02S12P
60mV
Vin=36 - 75V, Imax
Vin=48V, Iout=0 - Imax
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
ALL
90% - 110%
-
ALL
36 - 75V
-
Input characteristics
Features
•
•
•
•
•
•
•
Operating input voltage
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Output voltage Trim
Maximum input current
Input reflected ripple current
(PK-PK)
GBC06S3V3P, GBC05S05P
1A
GAC02S12P
0.75A
GBC05S05P
50mA
GBC06S3V3P, GAC02S12P
40mA
Vin=36V, Iout=6A
Vin=36V, Iout=2.1A
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
Output OVP
Over current Protection
Over temperature Protection
ALL
Turn on: 31 - 36V
Turn off: 30 - 35V
Hysteresis: 1 - 3V
GBC06S3V3P
118% - 150%
Hiccup
GBC05S05P
120% - 170%
Hiccup
GAC02S12P
115% - 140%
Latch off
GBC06S3V3P
110% - 200%
GBC05S05P
110% - 170%
GAC02S12P
110% - 190%
GBC06S3V3P, GBC05S05P
100 - 125ºC
GAC02S12P
115 - 135ºC
Hiccup
Converter will reset when over
temperature condition is removed
Hysteresis: 10ºC
Absolute maximum ratings
-
Input voltage
Continuous
Transient (100 ms)
ALL
Operating ambient temperature
Storage temperature
80V
-
100V
-
ALL
-40 - 85ºC
-
ALL
-55 - 125ºC
-
ALL
-0.7 - 1.2V
Positive logic
Other characteristics
Remote on/off voltage
Low level
High level
3.5 - 12V
Input-to-output Isolation voltage ALL
Mean time between failures
(MTBF)
1500VDC
GBC05S05P
2.5 million hours
GBC06S3V3P, GAC02S12P
1.5 million hours
Basic isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
18
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 18
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GBC06S3V3P
36 - 75V
3.3V
6A
20W
86.0%
GBC05S05P
36 - 75V
5V
5A
25W
87.0%
GAC02S12P
36 - 75V
12V
2.1A
25W
88.5%
Mechanical Diagram
Unit: mm [in.]
8]
5
2
4
45.72[1.800]
50.80[2.000]
10.16[0.400]
17.78[0.700]
5.08[0.200]
3
10.16[0.400]
40.6[1.60]
6
1
10.16[0.400]
.11
12.7[0.50]
0[0
15.24[0.600]
3.0
3.80[0.150]
4-R
Top View
6-Φ1.00[0.040]
6-Φ2.00[0.080]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
ON/OFF
4
Vout(+)
2
Vin(-)
5
Vout(-)
3
Vin(+)
6
Trim
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* The width of GBC06S3V3P and GBC05S05P: 35.6[1.40]
19
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 19
BMP SERIES
Nonstandard Brick Series
GAC 15W Dual Outputs Series
Introduction
The GAC dual outputs series use open-rack and industry standard package, the efficiency reaching 88%,
total output power 15W. All modules support primary ON/OFF control. This series which conform to
the RoHS6 requirement can be used in the fields of communication, data transmission and distributed
power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
GAC15D12P
0.02%Vo (+12V)
Vin=36 - 75V, Iout =0.62A
0.04%Vo (-12V)
0.1%Vo (+12V)
Output load regulation
GAC15D12P
Vin=48V, Iout=0.06 - 0.62A
4%Vo (-12V)
1%Vo (+12V)
Features
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Remote on/off control
Regulated voltage
GAC15D12P
Output ripple and noise (PK-PK)
GAC15D12P
60mV
Output voltage adjustment
range (trim)
GAC15D12P
NA
-
Operating input voltage
GAC15D12P
36 - 75V
-
Maximum input current
GAC15D12P
0.55A
Vin=36V, Po=15W
Input reflected ripple current
(PK-PK)
GAC15D12P
20mA
Oscilloscope bandwidth: 20 MHz
Input UVP
GAC15D12P
Turn on: 31 - 36V
Turn off: 30 - 35V
Output OVP
GAC15D12P
110% - 133%
(+12V) Hiccup
(-12V) Hiccup while (+12V) OVP
Over current Protection
GAC15D12P
113% - 190%
Hiccup
Over temperature Protection
GAC15D12P
NA
Without this function
80V
-
5%Vo (-12V)
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
Input characteristics
Protection characteristics
Hysteresis: 1 - 3V
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
GAC15D12P
Operating ambient temperature
GAC15D12P
-40 - 85ºC
-
Storage temperature
GAC15D12P
-55 - 125ºC
-
GAC15D12P
-0.7 - 1.2V
Positive logic
Input-to-output Isolation voltage GAC15D12P
1500VDC
100V
Other characteristics
Remote on/off voltage
Low level
High level
Mean time between failures
(MTBF)
3.5 - 12V
GAC15D12P
1.5 million hours
Basic Isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
20
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 20
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAC15D12P
36 - 75V
±12V
0.62A
15W
88.0%
Mechanical Diagram
6
2
5
3
25.4[1.00]
1
20.32[0.800]
5.08[0.200]
Unit: mm [in.]
4
20.32[0.800]
50.8[2.00]
10.5[0.41]
Top View
3.80[0.150]
5-Φ1.00[0.040]
5-Φ2.00[0.080]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
ON/OFF
4
+12Vo
2
Vin(-)
5
COM
3
Vin(+)
6
-12Vo
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
21
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 21
BMP SERIES
Nonstandard Brick Series
GAE Dual Outputs Series
Introduction
The GAE dual outputs series DC-DC converter is high-efficiency and power density isolated module.
Total output power is 30W, output voltage ±12V, supporting primary ON/OFF control function. This
series which conform to the RoHS6 requirement can be used in the fields of communication, data
transmission and distributed power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
GAE30D12
0.3%Vo (+12V)
Vin=36 - 75V, Iout =1.25A
Output load regulation
GAE30D12
0.5%Vo (+12V)
Vin=48V, Iout=0.06 - 0.62A
Regulated voltage
GAE30D12
3%Vo (+12V)
The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
GAE30D12
150mV (±12V)
Oscilloscope bandwidth: 20 MHz
Output voltage adjustment
range (trim)
GAE30D12
70% - 105% (+12V)
-
Operating input voltage
GAE30D12
36 - 75V
-
Maximum input current
GAE30D12
1.25A
Vin=36V, Po=30W
Input reflected ripple current
(PK-PK)
GAE30D12
30mA
Oscilloscope bandwidth: 20 MHz
Input UVP
GAE30D12
Turn on: 31 - 36V
Turn off: 30 - 35V
Output OVP
GAE30D12
116% - 138%
Over current Protection
GAE30D12
120% - 240% (±12V)
Over temperature Protection
GAE30D12
NA
-
GAE30D12
80V
-
Input characteristics
Features
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Protection characteristics
Hysteresis: 1 - 3V
(+12V) Hiccup
(-12V) Hiccup while (+12V) OVP
Hiccup
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
100V
Operating ambient temperature
GAE30D12
-40 - 85ºC
-
Storage temperature
GAE30D12
-55 - 125ºC
-
GAE30D12
-0.7 - 1.2V
Positive logic
Other characteristics
Remote on/off voltage
Low level
High level
3.5 - 12V
Input-to-output Isolation voltage GAE30D12
Mean time between failures
(MTBF)
GAE30D12
1500VDC
1.5 million hours
Basic Isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
22
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 22
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAE30D12
36 - 75V
±12V
1.25A
30W
86.5%
Mechanical Diagram
Unit: mm [in.]
57.9 [2.28]
50.80 [2.000]
4
3
5
2
6
6.34 [0.250]
19.04 [0.750]
3.50 [0.138]
3.80 [0.150]
7
17.78 [0.700]
22.9 [0.90]
1
9.2 [0.36]
Top View
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
5
COM
2
ON/OFF
6
Trim
3
Vin(-)
7
Vout(+)
4
Vout(-)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
23
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 23
BMP SERIES
Nonstandard Brick Series
GAQ Dual Outputs Series
Introduction
The GAQ dual outputs series DC-DC converter are high-efficiency and power density isolated modules.
This series contain 3 modules, output power from 45W to 65W, output voltage covering 3.3V/1.2V,
3.3V/1.5V and ±12V. All modules support primary ON/OFF control. This series which conform to the
RoHS6 requirement can be used in the fields of communication, data transmission and distributed
power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
ALL
GAQ45D3312, GAQ45D3315
Output load regulation
GAQ65D12
Regulated voltage
Output ripple and noise (PK-PK)
Features
•
•
•
•
•
•
Output voltage adjustment
range (trim)
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
0.2%Vo
Vin=36 - 75V, Imax
0.5%Vo
0.5%Vo
0.3%Vo
Vin=48V, Iout=0 - Imax
0.3%Vo
GAQ45D3312, GAQ45D3315
2%Vo
GAQ65D12
3%Vo
GAQ45D3312
30mV
GAQ45D3315
50mV
GAQ65D12
75mV
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
ALL
80% - 110%
-
ALL
36 - 75V
-
Input characteristics
Operating input voltage
Maximum input current
Input reflected ripple current
(PK-PK)
GAQ45D3312
2.0A
Vin=36V, I3.3Vo=8A, I1.2Vo=13A
GAQ45D3315
2.0A
Vin=36V, I3.3Vo=8A, I1.5Vo=12A
GAQ65D12
2.7A
Vin=36V, I12Vo=2.7A, I-12Vo=2.7A
GAQ45D3312, GAQ45D3315
20mA
GAQ65D12
30mA
Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP
Output OVP
ALL
GAQ45D3312, GAQ45D3315
120% - 150%
GAQ65D12
120% - 140%
GAQ45D3312
Over current Protection
GAQ45D3315
GAQ65D12
Over temperature Protection
Turn on: 31 - 36V
Turn off: 30 - 35V
Hysteresis: 1 - 3V
Hiccup
113% - 175%(3.3Vo)
115% - 170%(1.2Vo)
113% - 175%(3.3Vo)
Hiccup
125% - 180%(1.5Vo)
120% - 180%(±12Vo)
GAQ45D3312, GAQ45D3315
110 - 135ºC
GAQ65D12
115 - 135ºC
Converter will reset when
overtemperature condition is removed
Hysteresis:10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
ALL
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
ALL
-0.7 - 1.2V
Negative logic
80V
-
100V
Other characteristics
Remote on/off voltage
Low level
High level
3.5 - 12V
Input-to-output Isolation voltage ALL
Mean time between failures
(MTBF)
ALL
1500VDC
1.5 million hours
Basic Isolation
Telcordia SR332, 80% load,
300LFM, TA=40ºC
24
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 24
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAQ45D3312
36 - 75V
3.3V&1.2V
8A&13A
45W
88.0%
GAQ45D3315
36 - 75V
3.3V&1.5V
8A&12A
45W
88.0%
GAQ65D12
36 - 75V
±12V
2.7A&2.7A
65W
90.0%
Mechanical Diagram
50.80[2.000]
7
1
36.8[1.45]
6.35[0.250]
57.9[2.28]
6.35[0.250]
6.35[0.250]
8.89[0.350]
8.89[0.350]
Unit: mm [in.]
6
2
5
3
4
Top View
3.80[0.150]
10.2[0.40]
7-Φ2.00[0.080]
7-Φ1.00[0.040]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
5
COM
2
ON/OFF
6
Trim
3
Vin(-)
7
Vout(+)
4
Vout(-)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
25
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 25
BMP SERIES
Nonstandard Brick Series
GAQ 24V Output Series
Introduction
The GAQ 24V single output series use open-frame and industry standard 1/4 brick size, effectively saving
board space, the efficiency reaching 92.5%, total output power 72W. All modules support primary ON/
OFF control and TRIM function. This series which conform to the RoHS6 requirement can be used in the
fields of communication, data transmission and distributed power supply system.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
GAQ03S24
3%Vo
Vin=36 - 75V, Iout=3A
Output load regulation
GAQ03S24
3%Vo
Vin=48V, Iout=0 - 3A
Regulated voltage
GAQ03S24
3%Vo
The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
GAQ03S24
300mV
Oscilloscope bandwidth: 20 MHz
Output voltage adjustment
range (trim)
GAQ03S24
66% - 100%
-
Operating input voltage
GAQ03S24
36 - 75V
-
Maximum input current
GAQ03S24
2.4A
Vin=36V, Iout=3A
Input reflected ripple current
(PK-PK)
GAQ03S24
30mA
Oscilloscope bandwidth: 20 MHz
Input UVP
GAQ03S24
Turn on: 31 - 36V
Turn off: 30 - 35V
Output OVP
GAQ03S24
110% - 140%
Hiccup
Over current Protection
GAQ03S24
110% - 170%
Hiccup
Over temperature Protection
GAQ03S24
110 - 130ºC
GAQ03S24
80V
Input characteristics
Features
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Output voltage trim
Protection characteristics
Hysteresis: 1 - 3V
Converter will reset when
overtemperature condition is removed
Hysteresis: 10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
-
100V
Operating ambient temperature
GAQ03S24
-40 - 85ºC
-
Storage temperature
GAQ03S24
-55 - 125ºC
-
GAQ03S24
-0.7 - 1.2V
Negative logic
Other characteristics
Remote on/off voltage
Low level
High level
3.5 - 12V
Input-to-output Isolation voltage GAQ03S24
Mean time between failures
(MTBF)
GAQ03S24
1500VDC
1.5 million hours
Basic Isolation
Telcordia SR332, 80% load, 300LFM,
TA=40ºC
26
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 26
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
GAQ03S24
36 - 75V
24V
3A
72W
92.5%
Mechanical Diagram
Unit: mm [in.]
6
1
5
2
50.80[2.000]
57.9[2.28]
19.05[0.750]
12.70[0.500]
4
17.78[0.700]
36.8[1.45]
3
Top View
3.80[0.150]
8.7[0.34]
6-Φ2.00[0.080]
6-Φ1.00[0.040]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin(+)
4
Vout(-)
2
ON/OFF
5
Trim
3
Vin(-)
6
Vout(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
27
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 27
BMP SERIES
Nonstandard Brick Series
RAG Ring Generator Series
Introduction
The RAG series DC-AC converter are high-efficiency and power density standard ring generator. The
output power is 40W, output voltage [email protected] This series support primary ON/OFF control
function. This series which conform to the RoHS6 requirement can be used in the fields of the telephone
system, integrated access device VoIP connector applications and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
RAG40S75P
0.5%Vo
Vin=36 - 72V; Iout=0.53A
Output load regulation
RAG40S75P
1%Vo
Vin=48V; Iout=0 - 0.53A
Regulated voltage
RAG40S75P
8%Vo
The whole range of Vin, Iout and TA
Output voltage frequency
RAG40S75P
25Hz
-
Output voltage adjustment
range (trim)
RAG40S75P
NA
-
Operating input voltage
RAG40S75P
36 - 72V
-
Maximum input current
RAG40S75P
1.5A
Input UVP
RAG40S75P
Turn on: 31 - 36V
Turn off: 30 - 35V
Output OVP
RAG40S75P
NA
Over current Protection
RAG40S75P
110% - 190%
Over temperature Protection
RAG40S75P
105 - 125ºC
RAG40S75P
82V
Input characteristics
Protection characteristics
Features
•
•
•
•
•
•
•
•
Vin=0 - 72V; Iout=0.53A
Sine wave output, low distortion
Standard 25Hz tone
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Hysteresis: 1 - 3V
Hiccup
Converter will reset when
overtemperature condition is removed
Hysteresis: 10ºC
Absolute maximum ratings
Input voltage
Continuous
Transient (100 ms)
-
100V
Operating ambient temperature
RAG40S75P
-25 - 70ºC
-
Storage temperature
RAG40S75P
-40 - 105ºC
-
RAG40S75P
0 - 30V
Other characteristics
Remote on/off voltage
Low level
High level
Positive logic
36 - 72V
Input-to-output Isolation voltage RAG40S75P
Mean time between failures
(MTBF)
RAG40S75P
1000VDC
1.5 million hours
Basic Isolation
Telcordia SR332, 80% load, 300LFM,
TA=40ºC
28
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 28
BMP SERIES
Nonstandard Brick Series
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
RAG40S75P
36 - 72V
[email protected]
0.53A
40W
85.0%
Mechanical Diagram
7
8
4
3
9
10
63.52 [2.501]
2
68.60 [2.701]
86.4 [3.40]
88.4 [3.48]
6
5
78.76 [3.101]
17.80 [0.701]
2.56 [0.101]
83.84 [3.301]
Unit: mm [in.]
81.28 [3.200]
86.4 [3.40]
88.4 [3.48]
Bottom View
13.0 [0.51]
10.00 [0.394]
3.80 [0.150]
Top View
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
ON/OFF
7
Vout 2
2
Case
8
Vout 2
3
Vin(-)
9
Vout 1
4
Vin(-)
10
Vout 1
5
Vin(+)
11
GND
6
Vin(+)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.10mm[X.XXX±0.004 in.]
29
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 29
POL SERIES
NAK 20A Output Series
Introduction
NAK series is high performance SMT POL module, whose feature include wide range of input voltage,
high power density and perfect protection functions. The output current is 20A. The output voltage can
be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform
to the RoHS6 requirement is suitable for telecom devices, server, network and industry devices power
supply and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
Output load regulation
Regulated voltage
Output ripple and noise (PK-PK)
NAK03S20-A
NAK12S20-A, NAK12S20-C
NAK03S20-A
NAK12S20-A, NAK12S20-C
1%Vo
1%Vo
NAK12S20-C
2%Vo
NAK03S20-A, NAK12S20-A
3%Vo
ALL
150mV
Vin=3.0 - 5.5V, Imax
Vin=9 - 14V, Imax
Vin=3.3V/5.0V, Iout=0 - Imax
Vin=12V, Iout=0 - Imax
The whole range of Vin, Iout and TA
Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage
NAK03S20-A
NAK12S20-A, NAK12S20-C
3.0 - 5.5V
-
9 - 14V
-
Protection characteristics
Features
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense *
SMT reflow soldering
Input UVP
Output OVP
Over current Protection
NAK03S20-A
Turn on: 2.6 - 3.0V
Turn off: 2.4 - 2.9V
NAK12S20-A
Turn on: 6 - 7.4V
Turn off: 5 - 6.4V
NAK12S20-C
Turn on: 7 - 8.5V
Turn off: 6 - 7.5V
ALL
110% - 120%
NAK03S20-A
22 - 50A
NAK12S20-A, NAK12S20-C
22 - 40A
*NAK12S20-C without this function
Over temperature Protection
ALL
115 - 135ºC
Hysteresis: 0.3V
Self-recovery
Hiccup
Converter will reset when over
temperature condition is removed
Hysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous)
NAK03S20-A
5.5V
NAK12S20-A, NAK12S20-C
16V
-
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
Remote on/off voltage
Low level
High level
ALL
-0.2 - 0.5V
Positive logic
Mean time between failures
(MTBF)
ALL
Other characteristics
2.0 - 5.0V
1.5 million hours
Telcordia SR332, 80% load,
300LFM, TA=40ºC
30
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 30
POL SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
Notes
NAK03S20-A
3 - 5.5V
0.9 - 3.3V
20A
66W
95.0%
With Remote Sense
NAK12S20-A
9 - 14V
0.9 - 5.3V
20A
106W
95.0%
With Remote Sense
NAK12S20-C
9 - 14V
0.7 - 5.3V
20A
106W
93.5%
Without Remote Sense
Mechanical Diagram
Unit: mm [in.]
24.00[0.945]
10.44[0.411]
22.12[0.871]
3.03[0.119]
2.84[0.112]
3
4
2
5
6
7
1
12.11[0.477]
8.71[0.343]
4.22[0.166]
1.42[0.056]
1.41[0.056]
8.31[0.327]
12.11[0.477]
13.51[0.532]
7_2.5X1.6[0.098X0.063]
Bottom View
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin
5
SGND
2
GND
6
SENSE+
3
Vout
7
ON/OFF
4
Trim
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.05mm[X.XXX±0.002 in.]
* NAK12S20-C without Pin6
31
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 31
POL SERIES
NAJ 40A Output Series
Introduction
NAJ series is high performance SMT POL module, whose feature include wide range of input voltage,
high power density and perfect protection functions. All models support current sharing. The output
current is 40A. The output voltage can be set arbitrarily in the rating range. All modules can be used in
DPA or IBA. This series which conform to the RoHS6 requirement is suitable for telecom devices, server,
network and industry devices power supply and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
ALL
1%Vo
Vin=10 - 14V, Imax
Output load regulation
ALL
1%Vo
Vin=12V, Iout=0 - Imax
Regulated voltage
ALL
2%Vo
The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
ALL
150mV
Oscilloscope bandwidth: 20 MHz
ALL
9 - 14V
-
Input UVP
ALL
Turn on: 7 - 9V
Turn off: 5 - 7V
Hysteresis: 2V
Output OVP
ALL
110% - 140%
Self-recovery
Over current Protection
ALL
44 - 70A
Over temperature Protection
ALL
115 - 135ºC
Input voltage (Continuous)
ALL
16V
-
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
ALL
-0.3 - 0.5V
Positive logic
Input characteristics
Operating input voltage
Protection characteristics
Features
•
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense *
Multiple modules current sharing
SMT reflow soldering
*NAJ12S40-D without this function
Hiccup
Converter will reset when
overtemperature condition is removed
Hysteresis: 5ºC
Absolute maximum rang
Other characteristics
Remote on/off voltage
Low level
High level
0.86 - 3.0V
Mean time between failures
(MTBF)
ALL
1.5 million hours
Telcordia SR332, 80% load,
300LFM, TA=40ºC
32
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 32
POL SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
Notes
NAJ12S40-E
9 - 14V
0.7 - 3.3V
40A
132W
93.5%
With Remote Sense
NAJ12S40-D
9 - 14V
0.7 - 3.3V
40A
132W
93.5%
Without Remote Sense
Mechanical Diagram
Unit: mm [in.]
24.00[0.945]
21.92[0.863]
1.70[0.067]
15
14
13
12
11
10
9
8
7
15-2.5X1.60[0.098X0.063]
2.84[0.112]
1
2
3
4
5
10.44[0.411]
2.13[0.084]
9.60[0.378]
12.95[0.510]
15.33[0.604]
18.76[0.739]
25.84[1.017]
28.02[1.103]
26.80[1.055]
23.65[0.931]
20.50[0.807]
17.39[0.685]
14.02[0.552]
10.71[0.422]
7.57[0.298]
4.43[0.174]
1.28[0.050]
6
Side View
Bottom View
Pin Description
Pin No.
Function
Pin No.
Function
1
Vin
9
FSYN
2
GND
10
SENSE-
3
Vout
11
ON/OFF
4
Vout
12
SENSE+
5
GND
13
ISHARE
6
Vin
14
SGND
7
FB
15
TRIM
8
CLOCKOUT
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.05mm[X.XXX±0.002 in.]
* NAJ12S40-D without Pin10 and Pin12
33
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 33
POL SERIES
NAK 3D POL Series
Introduction
NAD series is high performance SMT POL module, whose feature include wide range of input voltage,
high power density and perfect protection functions. The output current include 10A, 20A and 40A.
The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This
series which conform to the RoHS6 requirement are suitable for telecom devices, server, network and
industry devices power supply and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output line regulation
ALL
1%Vo
Vin=9 - 14V, Imax
Output load regulation
ALL
1%Vo
Vin=12V, Iout=0 - Imax
Regulated voltage
ALL
3%Vo
The whole range of Vin, Iout and TA
ALL
30mV
Vo≤1.2V, Oscilloscope bandwidth:
20 MHz
ALL
60mV
Vo>1.2V, Oscilloscope bandwidth:
20 MHz
ALL
9 - 14V
-
Input UVP
ALL
Turn on: 6.5 - 8.5V
Turn off: 5.0 - 7.0V
Output OVP
ALL
110% - 130%
Output ripple and noise (PK-PK)
Input characteristics
Operating input voltage
Protection characteristics
Features
•
•
•
•
•
•
•
•
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
Remote sense *
SMT reflow soldering
*NAD12S10-A has VS+ only
Over current Protection
Over temperature Protection
NAD12S10-A
10 - 25A
NAD12S20-A
22 - 38A
NAD12S40-A
44 - 70A
Hysteresis: 1.5V
Self-recovery
Hiccup
Converter will reset when
overtemperature condition is removed
Hysteresis: 5ºC
ALL
115 - 130ºC
Input voltage (Continuous)
ALL
16V
-
Operating ambient temperature
ALL
-40 - 85ºC
-
Storage temperature
ALL
-55 - 125ºC
-
ALL
-0.3 - 0.5V
Positive logic
Absolute maximum rang
Other characteristics
Remote on/off voltage
Low level
High level
2.0 - 5.0V
Mean time between failures
(MTBF)
ALL
2.5 million hours
Telcordia SR332, 80% load,
300LFM, TA=40ºC
34
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 34
POL SERIES
Model Selector
Model
NAD12S10-A
NAD12S20-A
NAD12S40-A
Input Voltage
9 - 14V
9 - 14V
9 - 14V
Output Voltage
0.7 - 5.3V
0.7 - 2.0V
0.7 - 2.0V
Output Current
10A
20A
40A
Output Power
50W
40W
80W
Efficiency
95.5%
92.5%
92.5%
Mechanical Diagram
3
2
12.19 [0.480]
9.52 [0.375]
NAD12S10-A
4.95 [0.195]
Unit: mm [in.]
12.19 [0.480]
9.53 [0.375]
4
3.81[0.150]
3- 3.76[0.148] x 1.48[0.058]
10.67 [0.420]
16
8.38 [0.330]
5
1
6.10 [0.240]
14
10
8
9
1.52 [0.060]
7
6
0.00 [0.000]
10.80 [0.425]
1.60 [0.063]
8.38 [0.330]
10.67 [0.420]
6.10 [0.240]
0.00 [0.000]
1.52 [0.060]
9- SQUARE 0.86[0.034]
Side View
Bottom View
Pin Description
5.97 [0.235]
10.41 [0.410]
14.60 [0.575]
18.80 [0.740]
3
4
5
6
7
10
2
14
9
10.06 [0.396]
8
5.72 [0.225]
3.18 [0.125]
1.52 [0.060]
1
SQUARE 0.86 [0.034]
19.05 [0.750]
20.32 [0.800]
0.00 [0.000]
1.78 [0.070]
5.72 [0.225]
1.55 [0.061]
1.27 [0.050]
0.00 [0.000]
2.49[0.110]x2.13[0.084]
7-2.14[0.084]x1.43[0.056]
11.18 [0.440]
10.16 [0.400]
Function
GND
NC
NC
PGOOD
NC
NC
Bottom View
9.20 [0.362]
2-3.76[0.148]x1.48[0.058]
Pin No.
7
8
9
10
14
16
1.60 [0.063]
NAD12S20-A
Function
ON/OFF
Vin
GND
Vout
VS+
Trim
1.52 [0.060]
Pin No.
1
2
3
4
5
6
Side View
Pin Description
Pin No.
1
2
3
4
5
6
Function
ON/OFF
Vin
NC
GND
Trim
Vout
Pin No.
7
8
9
10
14
Function
VS+
VSPG
NC
SIG_GND
35
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 35
POL SERIES
Mechanical Diagram
Unit: mm [in.]
17
9
12
11
10
19
1
12.10 [0.476]
8.38 [0.330]
4.95 [0.195]
1.91 [0.075]
1.27 [0.050]
5-SQUARE 1.52[0.060]
Bottom View
1.80 [0.071]
28.99 [1.141]
33.02 [1.300]
24.17 [0.952]
7
6-SQUQRE 1.73[0.068]
11.00 [0.433]
16
6
28.70 [1.130]
31.66 [1.246]
9.33 [0.367]
15.05 [0.593]
19.34 [0.761]
5
20.80 [0.819]
8
2
4
13.82 [0.544]
3
0.00 [0.000]
2.22 [0.087]
2-4.15[0.063]x2.52[0.099]
13.46 [0.530]
11.70 [0.461]
3.28[0.129]x1.73[0.068]
4.19 [0.165]
1.38 [0.054]
0.00 [0.000]
3.13[0.123]x1.76[0.069]
2.14 [0.084]
4.95 [0.195]
NAD12S40-A
Side View
Pin Description
Pin No.
Function
Pin No.
Function
1
ON/OFF
9
NC
2
Vin
10
GND
3
NC
11
SIG_GND
4
GND
12
VS-
5
Vout
16
PG
6
Trim
17
NC
7
VS+
19
NC
8
GND
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
Pin: X.XX±0.05mm[X.XXX±0.002 in.]
36
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 36
POL SERIES
NAS Vertical SMT Package Series
Introduction
NAS series is high performance SMT POL module, whose feature include wide range of input voltage,
high power density, perfect protection functions and supporting VR11.1. The output current is 80A.
The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This
series which conform to the RoHS6 requirement is suitable for telecom devices, server, network and
industry devices power supply, especially suitable for large current chip power supply such as x86 CPU,
ASIC, FPGA and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output voltage setpoint
1.2V
Output voltage range
Output line regulation
0.75 - 1.2V
1.18 - 1.22V, Vin=12V
Adjusted by setting the status of
VID0 to VID7
1%Vo
Vin=9 - 14 V, Iout=80A
Output load regulation
1%Vo
Vin=12V, Iout=0 - 80A
Regulated voltage
3%Vo
The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
50mV
Oscilloscope bandwidth: 20 MHz
9 - 14V
-
NAS12S80-A
Input characteristics
Operating input voltage
Features
•
•
•
•
•
•
•
NAS12S80-A
Protection characteristics
Input under voltage protection
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Remote on/off control
SMT reflow soldering
Turn on: 6.5 - 8.5V
Turn off: 6 - 8V
Input UVP
Output OVP
Over current Protection
NAS12S80-A
Over temperature Protection
Hysteresis: 1.0V
115% - 120%
latch off
110% - 175%
Hiccup
115 - 135ºC
Converter will reset when
overtemperature condition is removed
Hysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous)
Operating ambient temperature
NAS12S80-A
Storage temperature
16V
-
-40 - 85ºC
-
-55 - 125ºC
-
-0.3 - 0.5V
Positive logic
Other characteristics
Remote on/off voltage
Low level
High level
ALL
2.0 - 5.0V
Mean time between failures
(MTBF)
NAS12S80-A
1.5 million hours
Telcordia SR332, 80% load, 300LFM,
TA=40ºC
37
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 37
POL SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
NAS12S80-A
9 - 14V
0.75 - 1.2V
80A
100W
89.5%
Mechanical Diagram
6.7[0.26]
2.0[0.08]
11.4[0.45]
13.0[0.51]
Unit: mm [in.]
38.0[1.50]
16.0[0.63]
52.5[2.07]
1
16 17
33
48
49
32
64
Bottom View
22.3[0.88]
Top View
4-Φ1.20[0.047]
58.0[2.28]
Side View
Pin Description
Pin No.
Function
Pin No.
Function
Pin No.
Function
Pin No.
Function
Pin No.
Function
1
Vin
14
VID2
27
NC
40
GND
53
Vout
2
Vin
15
VID1
28
NC
41
Vout
54
Vout
3
GND
16
VID0
29
GND
42
Vout
55
Vout
4
GND
17
PSI
30
GND
43
Vout
56
Vout
5
EN-Vtt
18
IMON
31
Vin
44
Vout
57
GND
6
VR-RDY
19
Sense-
32
Vin
45
GND
58
GND
7
VR-FAN
20
Sense+
33
Vout
46
GND
59
GND
8
VR-HOT
21
5V
34
Vout
47
GND
60
GND
9
VID7
22
NC
35
Vout
48
GND
61
Vout
10
VID6
23
NC
36
Vout
49
GND
62
Vout
11
VID5
24
NC
37
GND
50
GND
63
Vout
12
VID4
25
NC
38
GND
51
GND
64
Vout
13
VID3
26
NC
39
GND
52
GND
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
38
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 38
POL SERIES
NAP SIP Series
Introduction
NAP series is high performance SIP POL module, whose feature include wide range of input voltage,
high power density and perfect protection functions. This series include BUCK and BOOST modules,
the output current covering 4A, 6A, 10A and 16A four levels. The output voltage can be set arbitrarily
in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6
requirement are suitable for telecom devices, server, network and industry devices power supply.
Specification
Model
Output characteristics
Output line regulation ALL
Output load regulation ALL
Regulated voltage
ALL
NAP03S06-C, NAP03S06-E, NAP03S06-B,
NAP03S06-A, NAP03S06-F, NAP05S06-B,
NAP03S06-D, NAP05S06-A, NAP05S06-C,
NAP03S16-A
NAP05S10-A
Output ripple and noise
NAP03S04-A
(PK-PK)
NAP03S15-A
Parameter
1%Vo
2%Vo
3%Vo
70mV
100mV
60mV
50mV
75mV
•
•
•
•
•
•
•
The whole range of Vin, 100% load
Rating input voltage, Iout=0 - Imax
The whole range of Vin, Iout and TA
50mV
NAP12S16-A
Features
Notes & Conditions
Oscilloscope bandwidth: 20 MHz
Vout< 3.3V, Oscilloscope bandwidth:
20 MHz
Vout≥ 3.3V, Oscilloscope bandwidth:
20 MHz
Input characteristics
Input under voltage protection *
Over current protection *
Short circuit protection *
Output overvoltage protection *
Over temperature protection *
Remote on/off control *
Support wave soldering
*NAP03S04-A without this function
NAP03S06-C, NAP03S06-B, NAP03S06-A,
NAP03S06-F, NAP03S15-A, NAP03S16-A
NAP03S06-E
NAP03S06-D
Operating input voltage
NAP05S06-A, NAP05S06-B, NAP05S06-C,
NAP05S10-A
NAP03S04-A
NAP12S16-A
Protection characteristics
NAP03S06-C, NAP03S06-E, NAP03S06-B,
NAP03S06-A, NAP03S06-F, NAP05S06-B,
NAP03S06-D, NAP05S06-A, NAP05S06-C,
NAP03S15-A, NAP03S16-A
Input UVP
NAP05S10-A
NAP12S16-A
NAP03S04-A
NAP05S10-A, NAP12S16-A
Output OVP
others
NAP03S06-C, NAP03S06-E, NAP03S06-B,
NAP03S06-A, NAP03S06-F, NAP05S06-B,
NAP03S06-D, NAP05S06-A, NAP05S06-C
Over current Protection NAP05S10-A
NAP03S15-A, NAP12S16-A
NAP03S16-A
NAP03S04-A
Over temperature
Protection
ALL
NAP03S04A
Absolute maximum rang
NAP03S06-C, NAP03S06-B, NAP03S06-A,
NAP03S06-F, NAP05S06-B, NAP05S06-A,
NAP05S06-C, NAP03S15-A, NAP03S16-A
Input voltage
NAP03S06-E, NAP03S04-A, NAP03S06-D
(Continuous)
NAP05S10-A
NAP12S16-A
Operating ambient
ALL
temperature
Storage temperature
ALL
Other characteristics
Mean time between
ALL
failures (MTBF)
3.0 - 5.5V
3.0 - 3.6V
3.15 - 3.6V
-
4.5 - 5.5V
3.0 - 4.0V
10 - 14V
Turn on: 1.95 - 2.15V
Hysteresis: 0.15V
Turn off: 1.8 - 2.0V
Turn on: 3.6 - 4.0V
Turn off: 1.87 - 3.8V
Turn on: 8.25 - 9.2V
Turn off: 7.25 - 8.1V
NA
105% - 125%
NA
Hysteresis: 0.1V
Hysteresis: 1.0V
Without this function
Self-recovery
Without this function
7 - 18A
12 - 30A
17 - 40A
26 - 47A
NA
115 - 135ºC
NA
Hiccup
Without this function
Converter will reset when over
temperature condition is removed
Hysteresis: 5ºC
Without this function
5.5V
4V
6V
16V
-
-40 - 85ºC
-
-55 - 125ºC
-
1.5 million hours
Telcordia SR332, 80% load, 300LFM,
TA=40ºC
39
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 39
POL SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
Mechnical Diagram
NAP03S06-E
3.0 - 3.6V
1.8V
6A
10W
90.0%
Diagram 2
NAP03S06-A
3.0 - 5.5V
2.1V
6A
12W
93.0%
Diagram 1
NAP03S06-D
3.15 - 3.6V
2.5V
6A
15W
95.0%
Diagram 1
NAP05S06-A
4.5 - 5.5V
3.3V
6A
20W
92.5%
Diagram 1
NAP05S06-C
4.5 - 5.5V
3.3V
6A
20W
92.5%
Diagram 2
NAP05S10-A
4.5 - 5.5V
3.3V
10A
33W
95.5%
Diagram 1
NAP03S04-A
3.0 - 4.0V
5.0V
4A
20W
90.5%
Diagram 3
NAP03S16-A
3.0 - 5.5V
0.75 - 3.3V
16A
50W
92.0%
Diagram 1
NAP12S16-A
10 - 14V
0.85 - 5.0V
16A
80W
92.0%
Diagram 1
Mechanical Diagram
Unit: mm [in.]
11.43[0.450]
13.97[0.550]
Diagram 1
13.20[0.520]
36.83[1.450]
1.27[0.050]
1 2 3 4 5
6 7 8 9 1011
35.06[1.380]
2.54[0.100]
1.00[0.039]
0.64x0.64[0.03x0.03]
6.20[0.244]
50.80[2.000]
Top View
Side View
Pin Description
Pin No.
Function
Pin No.
1
Vout
7
Function
Vin
2
Vout
8
Vin
Power good
3
Sense
9
4
Vout
10
Trim
5
GND
11
ON/OFF
6
GND
* NAP03S16-A, NAP05S10-A and NAP12S16-A without Pin9
40
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 40
POL SERIES
3.54[0.139]
1.00[0.039]
1.27[0.050]
1.27[0.050]
13.97[0.550]
8.74[0.344]
Diagram 2
38.10[1.500]
1 23 4 5
50.80[2.000]
678
9 1011
0.64x0.64[0.03x0.03]
2.54[0.100]
Bottom View
Side View
Pin Description
Pin No.
Function
Pin No.
1
Vout
7
Function
Vin
2
Vout
8
Vin
3
Sense
9
NA
4
Vout
10
Trim
5
GND
11
ON/OFF
6
GND
11.43[0.450]
13.97[0.550]
Diagram 3
13.20[0.520]
36.83[1.450]
1.27[0.050]
1 2 3 4 5
6 7 8 9 1011
35.06[1.380]
2.54[0.100]
1.00[0.039]
0.64x0.64[0.03x0.03]
6.20[0.244]
50.80[2.000]
Top View
Side View
Pin Description
Pin No.
Function
Pin No.
1
Vout(+)
7
Function
Vin(-)
2
Vout(+)
8
Vin(+)
3
Vout(+)
9
Vin(+)
4
Vout(-)
10
Vin(+)
5
Vout(-)
11
Vin(+)
6
Vin(-)
Tolerances
Dimensions: X.X±0.5mm[X.XX±0.02 in.]
X.XX±0.25mm[X.XXX±0.010 in.]
41
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 41
SERVER POWER SERIES
Blade Server Power Supply Series
Introduction
Blade server power supply series contains AC-DC and DC-DC three products, including 2000W, 2500W
and 3000W power, support N+1 redundant, hot swap, PMBus communication and relevant protection.
Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for servers, storage, advanced
workstations, routers, network switches, telecommunications equipment and so on.
Specification
Model
Output characteristics
Output voltage range
Output power
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
PMBus 1.2 communication
protocol
Suitable for the TT, TN, IT power
supply system *
N+N, N+M redundant backup
Multi modules parallel
*PDC2500S12-CE without this function
Output line regulation
Output load regulation
Output ripple and noise (PK-PK)
Input characteristics
Operating input voltage
Maximum input current
Power factor
ALL
Parameter
12.0 - 12.8 V
PAC2000S12-CE
2000 W
PAC3000S12-CE
3000 W
PDC2500S12-CE
2500 W
ALL
ALL
ALL
1%Vo
1.2%Vo
150mV
PAC2000S12-CE
PAC3000S12-CE
PDC2500S12-CE
PAC2000S12-CE
PAC3000S12-CE
PDC2500S12-CE
PAC2000S12-CE
PAC3000S12-CE
90 - 264
[email protected]/60Hz
38.4 - 72V
10A
16A
80A
PAC2000S12-CE
PAC3000S12-CE
ALL
PAC2000S12-CE
PAC3000S12-CE
PDC2500S12-CE
PAC3000S12-CE
Turn on: 275V AC
Turn off: 280V AC
Turn on: 77V
Turn off: 82V
Turn on: 89V AC
Turn off: 84V AC
Turn on: 36V
Turn off: 34V
15V
170A - 200A
256A - 300A
213A - 250A
-
PAC2000S12-CE
PAC3000S12-CE
PDC2500S12-CE
PAC3000S12-CE
-5 - 60ºC
-5 - 50ºC
0 - 50ºC
-40 - 85ºC
0.98
Notes & Conditions
Vin=90 - 200 VAC; Pomax=800W
Vin=200 - 220 VAC; Pomax=1800W
Vin=220 - 264 VAC; Pomax=2000W
Vin=90 - 175 VAC; Pomax=1200W
Vin=175 - 200 VAC; Pomax=2500W
Vin=200 - 264 VAC; Pomax=3000W
Vin=38 - 40 VDC; Pomax=2200W
Vin=40 - 72 VDC; Pomax=2500W
Vin=90 - 264 VAC; Po=Max
Vin=220 VAC; Po=0 - Max
Oscilloscope bandwidth: 20 MHz
Vin=220 VAC; Po=2000W
Vin=220 VAC; Po=3000W
Vin=38 - 72V; Po=2500W
Vin=220 VAC; Po=Max
Protection characteristics
Input OVP
PDC2500S12-CE
Input UVP
PAC2000S12-CE
PAC3000S12-CE
PDC2500S12-CE
Output OVP
Over current Protection
Over temperature Protection
Absolute maximum ratings
Operating ambient temperature
Storage temperature
Other characteristics
PMBus communication
ALL
PAC2000S12-CE
Surge
PAC3000S12-CE
PDC2500S12-CE
Mean time between failures
(MTBF)
ALL
Input voltage/current/power
Output voltage/current/power
Output OVP/UVP alarm
Line to earth: ±2.5kV
Line to line: ±2.5kV
Line to earth: ±6kV
Line to line: ±6kV
Line to earth: ±4kV
Line to line: ±2.5kV
0.5 million hours
Hysteresis: 5.0V
Hysteresis: 2.0V
Hysteresis: 5.0V
Hysteresis: 2.0V
Latch-off
Latch-off
Self-recovery
-
IEC61000-4-5
IEC61000-4-5/ITU-TK.21
IEC61000-4-5
Telcordia SR332, Vin=220VAC,100%
load, TA=25ºC
42
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 42
SERVER POWER SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
PAC2000S12-CE
90 - 264 Vac
12V
162.6A
2000W
94.5%
PAC3000S12-CE
90 - 264 Vac
12V
244A
3000W
94.5%
PDC2500S12-CE
38.4 - 72V
12V
203.3A
2500W
94.0%
Mechanical Diagram
17.0 [0.67]
Unit: mm [in.]
97.5 [3.84]
126.0 [4.96]
PAC2000S12-CE
input connector
PAC2000S12-CE & PAC3000S12-CE
11.5 [0.45]
NEG(-)
276.8 [10.90]
Top View
RTN(+)
PDC2500S12-CE
3.8 [0.15]
40.5 [1.95]
14.6 [0.57]
Front View
303.5 [11.95]
10.0 [0.39]
Side View
Back View
1234
Input connector:
3000W --- IEC 60320 C20
2000W --- IEC 60320 C14
2500W --- M6 double OT terminal
D
C
B
A
Output socket: Tyco (1-6450831-8)
Mating connector: Tyco (1-6450861-3)
P1
P2
P3
P4
P5
P6
P7
P8
P9 P10 P11 P12
Output Socket
Pin definition of output socket:
Pin
Definition
Description
Pin
Definition
Description
P1~P6
12V
Output: 12V DC
D2
PRESENT
Power supply present (lagging pin)
P7~P12
GND
Power GND
A3
DCOK
Indicator whether the DC output voltage is OK
A1
A0
Address0
B3
ACOK
Indicator whether the AC output voltage is OK
B1
A1
Address1
C3
PS_INTERRUPT
Power supply interruption signal
C1
A2
Address2
D3
PSON
Power supply on/off control signal
D1
PS_KILL
Power supply kill
A4
NA
-
A2
SCL
PMBus clock signal
B4
I_Monitor
12V DC load sharing
B2
SDA
PMBus data signal
C4
Sense+
12V DC remote sense+
C2
GND
Signal GND
D4
Sense-
12V DC remote sense-
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
43
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 43
SERVER POWER SERIES
Rack Server Power Supply Series
Introduction
Rack server power supply series contains 750W and 460W two power levels, support N+1 redundant,
hot swap, high voltage DC input, PMBus communication and relevant protection. Surge protection
meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for servers, storage, advanced workstations,
routers, network switches, telecommunications equipment and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Output voltage range
ALL
11.85 - 12.45 V
11.4 - 12.6 [email protected] Standby
Vin=90 - 264 VAC; Po=Max
Vin=192 - 288 VDC; Po=Max
PAC750D1212-CE
750W
Vin=90 - 264 VAC; Pomax=750W
Vin=192 - 288 VDC; Pomax=750W
PAC460D1212-CE
460W
Vin=90 - 264 VAC; Pomax=460W
Vin=192 - 288 VDC; Pomax=460W
ALL
120mV
Oscilloscope bandwidth: 20 MHz
Output power
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
PMBus 1.2 communication
protocol
Suitable for the TT, TN, IT power
supply system
N+1 redundant backup (N≤5)
Multi modules parallel
Output ripple and noise (PK-PK)
Input characteristics
90 - 264 [email protected]/60Hz;
Operating input voltage
ALL
192- 288 VDC
PAC750D1212-CE
10A
Vin=230 VAC; Po=750W
PAC460D1212-CE
6A
Vin=230 VAC; Po=460W
ALL
0.97
Vin=230 VAC; Po=Max
Input UVP
ALL
Turn on: 89V AC
Turn off: 84V AC
Hysteresis: 5.0V
Input OVP
ALL
Turn on: 275V AC
Turn off: 280V AC
Hysteresis: 5.0V
Output OVP
ALL
15V
Maximum input current
Power factor
Protection characteristics
PAC750D1212-CE
73A - 93A
2.5 - 3 [email protected] Standby
PAC460D1212-CE
43A - 53A
2.5 - 3 A @12V Standby
Over current Protection
Over temperature Protection
Latch-off
Latch-off
ALL
-
Self-recovery
Operating ambient temperature
ALL
-5 - 55ºC
-
Storage temperature
ALL
-40 - 85ºC
-
PMBus communication
ALL
Input voltage/current/power
Output voltage/current/power
Output OVP/UVP alarm
-
Surge
ALL
Line to earth: ±2.5 kV
Line to line: ±2.5kV
Mean time between failures
(MTBF)
ALL
0.5 million hours
Absolute maximum ratings
Other characteristics
IEC61000-4-5
Telcordia SR332, Vin=220VAC,100%
load, TA=25ºC
44
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 44
SERVER POWER SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
PAC750D1212-CE
90 - 264 Vac
192V-288V dc
12V/12V
62.5A/2A
750W
94%
PAC460D1212-CE
90 - 264 Vac
192V-288V dc
12V/12V
38.3A/2A
460W
94%
Mechanical Diagram
Unit: mm [in.]
86.4 [3.40]
38.4 [1.51]
40.5 [1.59]
83.5 [3.29]
Product nameplate
12.5 [0.49]
14.0 [0.55]
227.0 [8.94]
Front View
1.4 [0.06]
Barcode
11.1 [0.44]
194.2 [7.64]
31.0 [1.22]
Back View
8.3 [0.33]
1.6 [0.06]
Top View
190.5 [7.50]
TOP
196.5 [7.74]
33
32
Side View
38 39
27 26
51 52
14 13
64
1
BOTTOM
Input connector: IEC 60320 C14
Gold finger mating connector: FCI (10075664-003LF)
Output Gold Finger
Pin definition of output gold finger:
Pin
Definition
Description
Pin
Definition
Description
01~13, 52~64
12V
Main output: 12 V DC
32
SCL
I2C clock signal
14~26, 39~51
GND
12V&12VSB Power GND
33
PSON
Power supply on/off control signal
27
A2
Address2
34
I-MON
12 V DC load sharing
28
A1
Address1
35
PSOK
Indicator whether the main output voltage is OK
29
A0
Address0
36
PRESENT
Power supply module present (short pin)
30
GND
I2C GND
37
12VSB
Standby output: 12 V DC
31
SDA
I2C data signal
38
PS_INTERRUPT
I2C interruption signal
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
45
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 45
COMMUNICATION
CUSTOM POWER SERIES
PAC440D5412-ON Power Module
Introduction
PAC440D5412O-ON Open frame AC-DC POE power module has 90 to 290Vac wide input voltage, -53V
and 12V dual isolated outputs, total rating output power 440W (12V/60W; -53Vdc /380W). The module
is environmental air cooling. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable
for switches, routers, access equipments and so on, that need dual power supply of 12V and 48V.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Features
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
Suitable for the TT, TN, IT power
supply system
Output voltage range
PAC440D5412-ON
-51.41 ~ -54.59V
11.64 ~ 12.36V
-
Output power
PAC440D5412-ON
[email protected]
[email protected]
-
Output line regulation
PAC440D5412-ON
1%Vo
Vin=90 - 264 VAC; Po=440W
Output load regulation
PAC440D5412-ON
3%Vo
Vin=220 VAC; Po=0 - 440W
Output ripple and noise (PK-PK)
PAC440D5412-ON
[email protected]
[email protected]
Oscilloscope bandwidth: 20 MHz
Operating input voltage
PAC440D5412-ON
90 - 290
[email protected]/60Hz
-
Maximum input current
PAC440D5412-ON
5.3A
Vin=220 VAC; Po=440W
Power factor
PAC440D5412-ON
0.98
Vin=220 VAC; Po=440W
Input UVP
PAC440D5412-ON
Turn on: 90V AC
Turn off: 85V AC
Output OVP
PAC440D5412-ON
-57 ~ -60V
13.5 ~ 16V
Hiccup
Over current Protection
PAC440D5412-ON
[email protected] - 10A
[email protected] - 7.5A
Hiccup
Over temperature Protection
PAC440D5412-ON
75ºC
Operating ambient temperature
PAC440D5412-ON
-25 - 55ºC
-
Storage temperature
PAC440D5412-ON
-40 - 70ºC
-
Surge
PAC440D5412-ON
Line to earth: ±6 kV
Line to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
PAC440D5412-ON
0.25 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Input characteristics
Protection characteristics
Hysteresis: 5.0V
Self-recovery
Absolute maximum ratings
Other characteristics
46
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 46
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
PAC440D5412-ON
90 - 290 Vac
-53.5V/12V
7.2A/5A
440W
91.5%
Mechanical Diagram
90.0 [3.54]
Unit: mm [in.]
Side View
1
2
8
9 10 11 12 13 14
3
4
5
6
7
Top View
Output connector: Molex (39-01-2145)
2.40
36.0 [1.42]
N
L
4.5
190.0 [7.48]
Input connector: Senda Zhejiang
(SD W50801-3A-HW)
Side View
Pin definition of output connector:
Pin
Definition
Colour
Description
1
-53V
Blue
Output: -53 V DC
2
-53V
Blue
Output: -53 V DC
3
NC
-
Keeping float
4
alarm
Green
AC input power off alarm (H:OK; L:abnormal)
5
+12V
Red
Output: 12 V DC
6
+12V
Red
Output: 12 V DC
7
+12V
Red
Output: 12 V DC
8
RTN(-53V)
Yellow
RTN(-53V)
9
RTN(-53V)
Yellow
RTN(-53V)
10
NC
-
Keeping float
11
POWER_GOOD
Gray
Indicator whether the 12V/-53V output voltage is OK (H:OK; L:abnormal)
12
12V_GND
Black
12V GND
13
12V_GND
Black
12V GND
14
12V_GND
Black
12V GND
Tolerance
190.0±0.5[7.48±0.02in]
90.0±0.5[3.54±0.02in]
36.0±1.0[1.42±0.04in]
47
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 47
COMMUNICATION
CUSTOM POWER SERIES
PAC500D5412-CE Power Module
Introduction
PAC500D5412-CE cassette AC-DC POE power module has 90 to 290Vac wide input voltage, -53V and
12V dual isolated outputs, total rating output power 500W (12V/120W; -53Vdc /380W). The module
is configured with fan for cooling through a back-to-front airflow. Surge protection meet IEC61000-4-5
and ITU-TK.21 standard. Be suitable for switches, routers, access equipments and so on, that need dual
power supply of 12V and 48V.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
I2C communication protocol
Hot swap
Suitable for the TT, TN, IT power
supply system
1+1 redundant backup
Output voltage range
PAC500D5412-CE
-51.89 ~ -55.11V
11.4 ~ 12.6V
-
Output power
PAC500D5412-CE
[email protected]
[email protected]
-
Output line regulation
PAC500D5412-CE
1%Vo
Vin=90 - 264 VAC; Po=500W
Output load regulation
PAC500D5412-CE
3%Vo
Vin=220 VAC; Po=0 - 500W
Output ripple and noise (PK-PK)
PAC500D5412-CE
[email protected]
[email protected]
Oscilloscope bandwidth: 20 MHz
Operating input voltage
PAC500D5412-CE
90 - 290
[email protected]/60Hz
-
Maximum input current
PAC500D5412-CE
6.3A
Vin=220 VAC; Po=500W
Power factor
PAC500D5412-CE
0.98
Vin=220 VAC; Po=500W
Output OVP
PAC500D5412-CE
-57 ~ -60 V
13.4 ~ 15V
Over current Protection
PAC500D5412-CE
[email protected] - 10A
[email protected] - 16A
Over temperature Protection
PAC500D5412-CE
70ºC
Operating ambient temperature
PAC500D5412-CE
-25 - 55ºC
-
Storage temperature
PAC500D5412-CE
-40 - 85ºC
-
I2C communication
PAC500D5412-CE
Input voltage/current/power
Output voltage/current/power
Output OVP/UVP alarm
-
Surge
PAC500D5412-CE
Line to earth: ±6 kV
Line to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
PAC500D5412-CE
0.25 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Input characteristics
Protection characteristics
Latch off
Hiccup
Self-recovery
Absolute maximum ratings
Other characteristics
48
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 48
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
PAC500D5412-CE
Input Voltage
90 - 264 Vac
Output Voltage
-53.5V/12V
Output Current
7.1A/10A
Output Power
500W
Efficiency
89.0%
Mechanical Diagram
Unit: mm [in.]
FC-3-3B
INPUT
OUTPUT
19.9[0.78]
43.2[1.70]
100-240Vac 50/60Hz 7-3.5A
Top View
18.0[0.71]
Front View
9.0[0.35]
9.3[0.37]
195.4[7.69]
43.3[1.70]
57.2[2.25]
39.8[1.57]
15-M3X6
Side View
90.0[3.54]
Back View
Pin definition of output socket:
Pin
P3
P4
D5
D6
Definition
12V+
12VGND
I2C-SDA
I2C-SCL
D4
3.3V
C4
C5
A0
A1
C6
PRESENT
D3
PG-12V
B4
WP
B6
A2
A3
SHARE-48V
A4
PG-48V
A5
PSKILL
P2
P1
48V48V+(RTN)
Description
12V output
I2C data signal
I2C clock signal
3.3V power supply from the main board, giving I2C chip
power supply of the module
I2C E2PROOM address0
I2C E2PROOM address1
To indicate to the system that the module is inserted in the
power bay. This pin has been shorted to the 12VGND in the
module
Indicator whether the 12V output voltage is OK, using
12VGND (H:OK, L:abnormal)
Write Protect: this pin should connected to 3.3V power
supply from the main board, using 12VGND
I2C E2PROOM address2
48V output current sharing signal, when two modules
working in current sharing mode, this pin of each module
should connect together
Indicator whether the 48V output voltage is OK, using
12VGND (H:OK, L:abnormal)
Hot swap signal, short pin, when this pin connect to the
12VGND by the back board, the module be enable
48V output
ROW S
D
C
B
A
POW ER SIGNAL POW ER
E1
P1 P2
PA
HA
PA
1 2 3 4 5 6
U U UU U U
T T TT T T
S S SS S S
R R RR R R
P3 P4
PA
E2
PA
HA
Output Socket
Input connector: IEC 60320 C14
Output socket: JONHON (DP2TJW0424-007)
Mating connector: JONHON (DP2ZJB0424-001)
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
49
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 49
COMMUNICATION
CUSTOM POWER SERIES
PAC1000D5403-CN Power Module
Introduction
PAC1000D5403-CN cassette AC-DC power module has 90 to 290Vac wide input voltage, -53.5V and
3.3V dual isolated outputs, total rating output power 1000W (53.5V/900W; 3.3Vdc /82.5W). The
module is environmental air cooling. The module is suitable for the application of transport network.
Specification
Model
Parameter
Notes & Conditions
Output voltage range
PAC1000D5403-CN
50.8 ~ 56.2V
3.23 - 3.57 V
-
Output power
PAC1000D5403-CN
[email protected]
[email protected]
-
Output line regulation
PAC1000D5403-CN
[email protected]%Vo
[email protected]%
Vin=90 - 264 VAC; Po=1000W
Output load regulation
PAC1000D5403-CN
[email protected]%Vo
[email protected]%
Vin=220 VAC; Po=0 - 1000W
Output ripple and noise (PK-PK)
PAC1000D5403-CN
[email protected]
[email protected]
Oscilloscope bandwidth: 20 MHz
Operating input voltage
PAC1000D5403-CN
90 - 290
[email protected]/60Hz
-
Maximum input current
PAC1000D5403-CN
9A
Vin=220 VAC; Po=1000W
Power factor
PAC1000D5403-CN
0.98
Vin=220 VAC; Po=1000W
Input OVP
PAC1000D5403-CN
Turn on: 290V AC
Turn off: 300V AC
Hysteresis: 5.0V
Input UVP
PAC1000D5403-CN
Turn on: 90V AC
Turn off: 85V AC
Hysteresis: 5.0V
Output OVP
PAC1000D5403-CN
58.5 ~ 61.5V
3.8 ~ 5.0V
[email protected]
[email protected]
Over current Protection
PAC1000D5403-CN
[email protected] - 21.8A
[email protected] - 42A
Over temperature Protection
PAC1000D5403-CN
-
Operating ambient temperature
PAC1000D5403-CN
-5 - 55ºC
-
Storage temperature
PAC1000D5403-CN
-40 - 85ºC
-
I2C communication
PAC1000D5403-CN
Output voltage;
Output OVP alarm;
OTP alarm;
Electronic label
-
Impulse current
PAC1000D5403-CN
DM: 3kA, CM: 5kA
-
Surge
PAC1000D5403-CN
Line to earth: ±6 kV
Line to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Output characteristics
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
I2C communication protocol
Hot swap
Suitable for the TT, TN, IT power
supply system
1+1 redundant backup
Input characteristics
Protection characteristics
Hiccup
Self-recovery
Absolute maximum ratings
Other characteristics
50
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 50
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
PAC1000D5403-CN
Input Voltage
90 - 290 Vac
Output Voltage
53.5V/3.3V
Output Current
16.8A/24.3A
Output Power
1000W
Efficiency
93.0%
Mechanical Diagram
Unit: mm [in.]
183.8 [7.24]
APIU
5.0 [0.20]
ON
~100-120V;50/60Hz;8A
~200-240V;50/60Hz;5A
70.0 [2.76]
40.0 [1.57]
41.83 [1.65]
20.32 [0.80]
32.87 [1.29]
49.95 [1.97]
183.80 [7.24]
PWR
OFF
193.80 [7.63]
186.15 [7.33]
2-5.20 [0.20]
18.95 [0.75]
Front View
193.80 [7.63]
21.75 [0.86]
173.40 [6.83]
196.55 [7.74]
208.90 [8.22]
Back View
E
D
C
B
A
15.9 [0.63]
0.6 [0.02]
39.74 [1.56]
Top View
J1
J2
J3
J4
6 5 4 3 2 1
VO3
Side View
GND
RTN
VO1
Output Socket
Input connector: IEC 60320 C14
Output socket: J1—STARCONN (091A01-8A00A)
J2, J3, J4----FCI (10073379-001LF)
Pin definition of J1:
Pin
A1
A2 - A6
B1 - B6
C1 - C6
D1 - D6
E1
E2
E3
E4
E5
E6
Definition
PRESENT
NA
NA
GND
NA
ALARM
I2C-SCL
I2C-SDA
SLOT ADDRESS 1
SLOT ADDRESS 2
SLOT ADDRESS 3
Description
To indicate to the system that the module is inserted in the power bay. This pin has been shorted to the GND in the module
3.3V output GND
AC input power off alarm signal (H:abnormal, L:OK)
I2C clock signal
I2C data signal
Slot address and I2C communication address; A3: A2: A1
000: The module in slot A
010: The module in slot B
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
51
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 51
COMMUNICATION
CUSTOM POWER SERIES
PAC2700S54-CB Power Module
Introduction
PAC2700S54-CB cassette AC-DC power module has 90 to 290Vac wide input voltage and single output
of -53.5V. The module is configured with fan for cooling through a front-to-back airflow, support CAN
communication and multi modules current sharing. Surge protection meet IEC61000-4-5 and ITU-TK.21
standard. Be suitable for switches, blade server, routers, transport network equipments and so on.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Features
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
CAN communication protocol
Suitable for the TT, TN, IT power
supply system
N+N, N+M redundant backup
Output voltage range
PAC2700S54-CB
-53.5V
-
Output power
PAC2700S54-CB
2700W
≤1200W
Output line regulation
PAC2700S54-CB
1%Vo
Vin=90 - 290 VAC; Po=2700W
Output load regulation
PAC2700S54-CB
1%Vo
Vin=220 VAC; Po=0 - 2700W
Output ripple and noise (PK-PK)
PAC2700S54-CB
300mV
Oscilloscope bandwidth: 20 MHz
Operating input voltage
PAC2700S54-CB
90 - 290 [email protected]/60Hz
Maximum input current
PAC2700S54-CB
18.5A
Vin=220 VAC; Po=2700W
Power factor
PAC2700S54-CB
0.98
Vin=220 VAC; Po=2700W
Input OVP
PAC2700S54-CB
Turn on: 290V AC
Turn off: 300V AC
Hysteresis: 10.0V
Input UVP
PAC2700S54-CB
Turn on: 90V AC
Turn off: 80V AC
Hysteresis: 10.0V
Output OVP
PAC2700S54-CB
58.5 - 60.5V
Over current Protection
PAC2700S54-CB
[email protected]=40 - 53.5V;
[email protected]=30 - 40V;
[email protected]=17 - 30V;
[email protected]=0 - 17V;
Over temperature Protection
PAC2700S54-CB
-
Operating ambient temperature
PAC2700S54-CB
-25 - 55ºC
-
Storage temperature
PAC2700S54-CB
-40 - 70ºC
-
CAN communication
PAC2700S54-CB
Input voltage/current/power
Output voltage/current/power
Output OVP/UVP alarm
-
Surge
PAC2700S54-CB
Line to earth: ±6kV
Line to line: ±6kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
PAC2700S54-CB
0.45 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Vin=176 - 290V AC
Vin=90 - 175V AC
Input characteristics
-
Protection characteristics
Latch-off
Hiccup: power on-off repeatedly
Self-recovery
Absolute maximum ratings
Other characteristics
52
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 52
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
PAC2700S54-CB
Input Voltage
90 - 290 Vac
Output Voltage
-53.5V
Output Current
50.5A
Output Power
2700W
Efficiency
95.5%
Mechanical Diagram
Unit: mm [in.]
20-M2_5X8
7-M3X6
13.0 [0.51]
Output Alarm
TOP
104.8 [4.13]
Input
PAC-2700WA
5.9 [0.23]
425.3 [16.74]
14.7 [0.58]
470.9 [18.54]
Top View
Side View
1
5.7 [0.22]
10.5 [0.41]
25.9 [1.02]
5.7 [0.22]
4.7 [0.18]
12.5 [0.49]
30.6 [1.20]
40.8 [1.61]
Front View
11.9 [0.47]
8.9 [0.35]
6
12.8 [0.50]
9.9 [0.39]
ROW E
19.4 [0.76]
ROW D
30.3 [1.19]
ROW C
Back View
ROW B
ROW A
Communication interface
Pin definition of communication interface:
Pin
A4
A5
A6
Definition
ISHARE+
ISHAREADDR3
B1
PRESENT
B2
B4, B5
B6
C5
C6
D1
D3
D5
D6
E1
E3
VCC_GND
ON/OFF
ADDR2
ADD5
ADD1
CAN_L_1
CAN_L_0
ADDR4
ADDR0
CAN_H_1
CAN_H_0
E5
ENABLE
E6
A1 - A3, C1 - C4,
D2, D4, E2, E4
ADDR_GND
Description
ISHARE+
ISHAREAddress3
To indicate to the system that the module is inserted
in the power bay. This pin has been shorted to the
VCC_GND in the module
Return loop of VCC which come from the system
ON/OFF control signal (H:OFF; L:ON)
Address2
Address5
Address1
CAN L of channel 1
CAN L of channel 0
Address4
Address0
CAN H of channel 1
CAN H of channel 0
Output enable control (H:disable.L:enable), when
“ON/OFF” and “ENABLE” both be enabled, the
module can output
Address signal GND
NA
-
DC Output: -48V
RTN
Communication
Interface
AC input: PE
L
N
Input connector: JONHON (CZ36E-3T)
Output socket:
DC output---MOLEX (75556-1500)
Communication interface: Tyco (5223008-1)
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
53
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 53
COMMUNICATION
CUSTOM POWER SERIES
PAC1600T5453-CB Power Module
Introduction
PAC1600T5453-CB cassette AC-DC power module has 90 to 290Vac wide input voltage, 53V/52.5/3.3V
triple isolated outputs, total rating output power 1600W. The module is configured with fan for cooling
through a left-to-right airflow, support Hot-swap. Surge protection meet IEC61000-4-5 and ITU-TK.21
standard. Be suitable for the application of switches, routers and so on.
Specification
Model
Parameter
Notes & Conditions
PAC1600T5453-CB
[email protected] ~ 56.2V
[email protected] ~ 55.2V
[email protected] - 3.57 V
Output power
PAC1600T5453-CB
[email protected]
[email protected]
[email protected]
Output line regulation
PAC1600T5453-CB
2%Vo
Vin=90 - 290 VAC; Po=1600W
Output load regulation
PAC1600T5453-CB
5%Vo
Vin=220 VAC; Po=0 - 1600W
Output ripple and noise (PK-PK)
PAC1600T5453-CB
[email protected]
[email protected]
[email protected]
Operating input voltage
PAC1600T5453-CB
90 - 290 [email protected]/60Hz
Maximum input current
PAC1600T5453-CB
10A
Vin=220 VAC; Po=1600W
Power factor
PAC1600T5453-CB
≥0.95
Vin=110 VAC; Po=986W
Vin=220 VAC; Po=1600W
Input OVP
PAC1600T5453-CB
Turn on: 290V AC
Turn off: 295V AC
Hysteresis: ≥5.0V
Input UVP
PAC1600T5453-CB
Turn on: 90V AC
Turn off: 85V AC
Hysteresis: ≥5.0V
Output OVP
PAC1600T5453-CB
Vo1/[email protected] - 61.5V
[email protected] - 4.9V
Over current Protection
PAC1600T5453-CB
[email protected] - 33 A
[email protected] - 22.5A
Over temperature Protection
PAC1600T5453-CB
-
Output characteristics
Output voltage range
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
I2C communication protocol
Hot swap
Suitable for the TT, TN, IT power
supply system
1+1 redundant backup
[email protected]=176 - 290V,
<[email protected]=90-175V
[email protected]=176 - 290V,
<[email protected]=90-175V
[email protected]=90 - 290V
Oscilloscope bandwidth: 20 MHz
Input characteristics
-
Protection characteristics
Latch-off
Hiccup
Hiccup
Self-recovery
Absolute maximum ratings
Operating ambient temperature
PAC1600T5453-CB
-5 - 55ºC
-
Storage temperature
PAC1600T5453-CB
-40 - 70ºC
-
I2C communication
PAC1600T5453-CB
Input power;
Output voltage;
Air inlet temperature;
Remote reset (10s);
Fault alarm:
Fan failure alarm;
OTP alarm;
-
Impulse current
PAC1600T5453-CB
DM: 3kA, CM: 5kA
-
Surge
PAC1600T5453-CB
Line to earth: ±6 kV
Line to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
PAC1600T5453-CB
0.25 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Other characteristics
54
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 54
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
PAC1600T5453-CB
Input Voltage
Output Voltage
Output Current
Output Power
Efficiency
100 - 240 Vac
Vo1: 53.5V
Vo2: 52.5V
Vo3: 3.4V
22A/
7.6A/
7.6A
1600W
91.0%
Mechanical Diagram
11.9±0.1
[0.467±0.003]
16.0±0.1
[0.630±0.003]
11.9±0.1
[0.467±0.003]
8.0±0.2
[0.315±0.005]
209.3
+0.3
-0.4
[0.856±0.007]
+0.011
]
-0.015
29911619
IN
PSU1600-AC
ON
OUT
Side View
OFF
0
93.4 -0.3
[0.614±0.007]
15.6±0.2
[0.024±0.003]
FAULT
[0.626±0.003]
0.6±0.1
15.9±0.1
21.8±0.2
0
201.1 -0.4
+0.000
[7.915
]
-0.015
[1.634 +0.000 ]
-0.011
[8.238
0
41.5 -0.3
[1.811±0.007]
46.0±0.2
11.7±0.1
[0.461±0.003]
[1.909±0.003]
32.5±0.1
[1.280±0.003]
48.5±0.1
05
183.8 +0.2
-0.6
113.5±0.1
[4.469±0.003]
155
05
Top View
[7.236 +0.007
-0.023 ]
25.0±0.1
[0.984±0.003]
Unit: mm [in.]
[7.614 +0.000
-0.011 ]
Front View
Back View
Pin definition of J3:
Pin
a1
Definition
CARDIN_PWR
Type
Description
Output
Detect whether the power module
securely connects to the system
backplane. If yes, pin a1 and pin c1 are
short-circuited; if not, pin a1 and pin c1
are disconnected.
a2, a5, a9
NC
N/A
NC
a3
ISHARE+
Output
Current share bus +
a4
ISHARE-
Output
Current share bus -
a6 - a8
Vout3
Output
Output: 3.3 V
a10
I2C_SCK_PWR
Output/Input
I2C clock signal
a11
I2C_SDA_PWR
Output/Input
I2C data signal
b1 - b11
NC
N/A
-
c1 - c11
GND
N/A
GND
d1 - d11
NC
N/A
-
e1 - e8
Vout3
Output
Output: 3.3 V
e9 - e10
NC
N/A
-
e11
CARDIN_PWR
Output
Same function as pin a1
Vo1
e
d
c
b
a
11
1
RTN Vo2 RTN
J3
J2
RTN
J1
Output Socket
Input connector: IEC 60320 C14
Output socket: J1----FCI (10073379-001LF)
J2----STARCONN (095U03-00410A-M9)
J3----FCI (HM2R30PA5100N9LF)
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
55
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 55
COMMUNICATION
CUSTOM POWER SERIES
PAC320D2805-CN Power Module
Introduction
PAC320D2805-CN cassette AC-DC power module has 90 to 290Vac wide input voltage, 28V and
5V dual outputs. The output voltage of 28V can be adjusted from 17V to 30.5V through the IIC bus.
A radiator should be pasted to the shell for cooling. The module built-in 20KA lightning protection
component, and surge protection to meet IEC61000-4-5 standard. Be suitable for the power supply of
wireless base station.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Features
Output voltage range
PAC320D2805-CN
17 - 30.5V
5.48 - 5.71V
-
•
•
•
•
•
Output power
PAC320D2805-CN
Vo1: 320W
Vo2: 75W
The whole range of Vin, Iout and TA,
Po1+Po2<320W
Output line regulation
PAC320D2805-CN
1%Vo
Vin=90 - 290 VAC; Po=320W
Output load regulation
PAC320D2805-CN
2%Vo
Vin=220 VAC; Po=0 - 320W
Output ripple and noise (PK-PK)
PAC320D2805-CN
[email protected]
[email protected]
Operating input voltage
PAC320D2805-CN
90 - 290 [email protected]/60Hz
Maximum input current
PAC320D2805-CN
7A
Vin=220 VAC; Po=320W
Power factor
PAC320D2805-CN
0.95
Vin=220 VAC; Po=320W
Input OVP
PAC320D2805-CN
Turn on: 290V AC
Turn off: 295V AC
Hysteresis: 5.0V
Input UVP
PAC320D2805-CN
Turn on: 90V AC
Turn off: 85V AC
Hysteresis: 5.0V
Output OVP
PAC320D2805-CN
[email protected]
Vo2 hiccup while Vo1 OVP
Hiccup
Over current Protection
PAC320D2805-CN
[email protected] A
[email protected] A
Hiccup
Over temperature Protection
PAC320D2805-CN
-
Operating ambient temperature
PAC320D2805-CN
-40 - 45ºC
-
Storage temperature
PAC320D2805-CN
-40 - 70ºC
-
I2C communication
PAC320D2805-CN
Input power;
Adjust output voltage;
Fault alarm;
Remote power off;
-
Impulse current
PAC320D2805-CN
DM: 20kA, CM: 20kA
-
Surge
PAC320D2805-CN
Line to earth: ±4 kV
Line to line: ±2kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
PAC320D2805-CN
0.25 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
I2C communication protocol
Oscilloscope bandwidth: 20 MHz
Input characteristics
-
Protection characteristics
Self-recovery
Absolute maximum ratings
Other characteristics
56
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 56
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
Input Voltage
PAC320D2805-CN
90 - 290 Vac
Output Voltage
Vo1: 28V
Vo2: 5.5V
Output Current
11.43A
13.67A
Output Power
Efficiency
320W
91.0%
Mechanical Diagram
Unit: mm [in.]
8.2 [0.32]
23.9 [0.94]
5-4.0 [0.16]
6-1.1x1.1
14190148
37.6 [1.48]
95.5 [3.76]
14100077
106.6 [4.19]
L
Top View
Side View
37.6 [1.48]
AC input: N
241.3 [9.50]
95.5 [3.76]
38.2 [1.50]
10-M3X6
11.1 [0.44]
Side View
Side View
Pin definition of J3:
Pin definition of DC output connector
Definition
Description
PWR_5V5
Output: 5.5V
PWR_5V5
Output: 5.5V
PWR_5V5
Output: 5.5V
V28
Output: 28V
V28
Output: 28V
V28
Output: 28V
Communication
Connector
Power GND
1
1
14190148
Pin
1
2
3
4
5
6
Pin definition of communication connector
Definition
Description
AC_DOWN
AC input power off alarm
PWR_ID_1
Module identification ID_1
PWR_ID_0
Module identification ID_0
PWR_DWN_M
Remote power off
GND
Signal GND
PWR_I2CRS
I2C reset control (remain high>700ms)
PWR_I2C_SDA
I2C data signal
PWR_I2C_SCL
I2C clock signal
14100077
Pin
1
2
3
4
5
6
7
8
DC Output Connector
Input connector: N---SuZhou Huazhan (H18S)
L---SuZhou Huazhan (H18P)
Output connector:
DC output---Senda Zhejiang (VH-6A-B1-HW)
Communication interface---Senda Zhejiang (SDW12502-8A-C-HW)
Power GND---SuZhou Huazhan (H18P)
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
57
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 57
COMMUNICATION
CUSTOM POWER SERIES
PAC600S12-CE/CB Power Module
Introduction
PAC600S12 series cassette AC-DC power module have 90 to 290Vac wide input voltage, 12V and 3.3V
dual outputs, total rating output power 600W. The module is configured with fan for cooling through a
back-to-front airflow or the reverse direction. This series has two version, and the only difference is the
airflow direction. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for switches,
routers, access equipments, server, storage and so on, that need power supply of 12V.
Specification
Model
Parameter
Notes & Conditions
Output characteristics
Features
•
•
•
•
•
•
•
•
Over current protection
Short circuit protection
Output overvoltage protection
Over temperature protection
I2C communication protocol
Hot swap
Suitable for the TT, TN, IT power
supply system
1+1 redundant backup
Output voltage range
ALL
11.64 ~ 12.36V
3 - 3.8 V
-
Output power
ALL
[email protected]
-
Output line regulation
ALL
2%Vo
Vin=90 - 264 VAC; Po=600W
Output load regulation
ALL
3%Vo
Vin=220 VAC; Po=0 - 600W
Output ripple and noise (PK-PK)
ALL
[email protected]
Operating input voltage
ALL
90 - 290 [email protected]/60Hz
Maximum input current
ALL
7.8A
Vin=220 VAC; Po=600W
Power factor
ALL
≥0.95
Vin=220 VAC; Po=600W
Input UVP
ALL
Turn on: 90V AC
Turn off: 85V AC
Output OVP
ALL
13.5 ~ 16V
Hiccup
Over current Protection
ALL
52 - 60A
Hiccup
Over temperature Protection
ALL
E: 70ºC
B: 60ºC
Self-recovery
Operating ambient temperature
ALL
-25 - 55ºC
-
Storage temperature
ALL
-40 - 85ºC
-
I2C communication
ALL
Output voltage/current/power
Electronic label
(Rating output power, Device
type, Device name)
-
Surge
ALL
Line to earth: ±6 kV
Line to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF)
ALL
0.25 million hours
Telcordia SR332, Vin=220VAC, 100%
load, TA=25ºC
Oscilloscope bandwidth: 20 MHz
Input characteristics
-
Protection characteristics
Hysteresis: 5.0V
Absolute maximum ratings
Other characteristics
58
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 58
COMMUNICATION
CUSTOM POWER SERIES
Model Selector
Model
PAC600S12-CE
PAC600S12-CB
Input Voltage
90 - 290 Vac
90 - 290 Vac
Output Voltage
12V/3.3V
12V/3.3V
Output Current
50A/0.1A
50A/0.1A
Output Power
600W
600W
Efficiency
90.5%
90.5%
Notes
E: back-to-front airflow
B: front-to-back airflow
Mechanical Diagram
Unit: mm [in.]
35.1 [1.38]
5.0 [0.20]
38.0 [1.50]
22.3 [0.88]
8.0
204.7 [8.06]
4.0 [0.16]
16.4 [0.65]
90.0 [3.54]
99.0 [3.90]
100.7 [3.96]
195.5 [7.70]
Front View
14.6 [0.57]
Top View
39.6 [1.56]
43.0 [1.69]
57.2 [2.25]
5.0 [0.20]
4.0 [0.16]
90.0 [3.54]
3.6 [0.14]
93.4 [3.68]
Side View
Back View
Pin definition of output connector:
Pin
P3
P4
Definition
12V+
12VGND
D2
SHARE-12V
D3
PG-12V
D4
3.3V
D5
D6
C4
C5
I2C-SDA
I2C-SCL
A0
A1
C6
PRESENT
B2
B3
Alarm
3V3
B4
WP
B6
A2
A3
SHARE-48V
A4
PG-48V
A5
PSKILL
P2
P1
48V48V+(RTN)
Description
12V output current sharing signal, when two modules working
in current sharing mode, this pin of each module should connect
together
Indicator whether the 12V output voltage is OK
(H:OK, L:abnormal)
3.3V power supply from the main board, giving I2C chip power
supply of module
I2C data signal
I2C clock signal
I2C E2PROOM address0
I2C E2PROOM address1
To indicate to the system that the module is inserted in the power
bay. This pin has been shorted to the 12VGND in the module
AC input power off or UVP alarm signal (H:OK, L:abnormal)
Output: 3.3V/100mA
Write Protect: this pin should connected to 3.3V power supply
from the main board, using 12VGND
I2C E2PROOM address2
48V output current sharing signal, when two modules working
in current sharing mode, this pin of each module should connect
together
Indicator whether the 48V output voltage is OK
(H:OK, L:abnormal)
Hot swap signal, short pin, when this pin connect to the 12VGND
by the back board, the module be enable
48V output
SIGNAL
POWER
POWER
P1 P2 1 2 3 4 5 6 P3 P4
PART NUMBER ROWS
12V output
1892200-5
D
C
B
A
J J J J
J J
TM TM K K K K K K TM TM
HD
N N N N N N
S S S S S S
HD
Output Connector
Input connector: IEC 60320 C14
Output connector: Tyco (1892200-5)
Tolerances
±0.5[0.02in.] (≤63[2.48])
±1.0[0.04in.] (>63[2.48])
59
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 59
CDI has expert engineers on staff, ready to help
you with your design and reduce your time to market.
CDI has online ordering and thousands of parts in stock to help
you with your prototyping and fulfillment needs.
WEST REGION
Northwest
AK, HI, OR, WA
(888) 734-9600 Toll-Free
(425) 984-0196 Fax
[email protected]
Nothern California
Northern Nevada
(800) 536-9833 Toll-Free
(408) 733-7044 Direct
(408) 516-9769 Fax
[email protected]
Southern California
Southern Nevada
(800) 372-1580 Toll-Free
(858) 535-0003 Direct
(760) 897-2132 Fax
[email protected]
Rocky Mountain
AZ, CO, ID, MT, NM,
UT, WY
(800) 551-7357 Toll-Free
(720) 962-5152 Direct
(303) 265-9372 Fax
[email protected]
CENTRAL REGION
North Central
IA, IL, KS, MN, MO,
ND, NE, SD, WI
(866) 457-9430 Toll-Free
(312) 873-3725 Fax
[email protected]
South Central / South
AL, AR, LA, MS, OK, TN, TX
(800) 848-4234 Toll-Free
(972) 578-2644 Direct
(214) 722-1577 Fax
[email protected]
Southeast
FL, GA, NC, SC, PR
(800) 558-2351 Toll-Free
(321) 724-9910 Direct
(321) 729-6579 Fax
[email protected]
EAST REGION
Ohio Valley
IN, KY, MI, OH
(800) 931-8258 Toll-Free
(703) 995-0929 Fax
[email protected]
Northeast
CT, MA, ME, NH, NY
RI, VT
(800) 303-6440 Toll-Free
(413) 771-0089 Fax
[email protected]
Mid-Atlantic
DE, MD, NJ, PA, WV
VA, DC
(800) 293-2080 Toll-Free
(703) 995-0929 Fax
[email protected]cdiweb.com
CORPORATE FACILITIES
Executive Office / IT
2601 Blake Street, Suite 450
Denver, CO 80205
(303) 531-1800 Direct
(720) 294-0998 Fax
Accounting
(303) 531-1880 Direct
[email protected]
NORTH AMERICA
Canada
(877) 691-4121 Toll-Free
(877) 565-9506 Fax
[email protected]
Mexico
+1 (866) 851-5776 x4750 US Toll-Free
+52 (33) 1524-1514 Direct
+52 (33) 3335-5509 Fax
[email protected]
INTERNATIONAL SALES
Europe / UK / Russia
+1 (303) 357-2743 Direct
+1 (321) 729-6579 Fax
[email protected]
Asia / China / Japan / Australia
Middle East / Israel
+1 (800) 536-9833 Toll-Free (US)
+1 (408) 733-7044 Direct
+1 (408) 516-9769 Fax
[email protected]
Brazil / Central &
South America
+1 (303) 357-2740 (Español / English)
+1 (303) 279-0305 (Português / English)
+1 (312) 873-3725 Fax
[email protected]
[email protected]
Sales Management
(866) 851-5776 Toll-Free
[email protected]
Warehouse
7550 South Grant Street
Littleton, CO 80122
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademark Notice
, HUAWEI, and
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334
Page 60
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement