Samsung S27A850D User manual User manual

Add to my manuals
90 Pages

advertisement

Samsung S27A850D User manual User manual | Manualzz
User Manual
SyncMaster
S27A850D
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00082A-11
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
ⓒ 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
z
An administration fee may be charged if either
†
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
†
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
z
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Before Using the Product
2
Before Using the Product
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Symbols for safety precautions
A serious or fatal injury may result if instructions are not followed.
Warning
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
3
Before Using the Product
Cleaning
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth.
z
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
z
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
!
Before Using the Product
4
Before Using the Product
Securing the Installation Space
z
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
10 cm
10 cm
10 cm
10 cm
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (81page) if the inside of the monitor needs
cleaning. (service fee will be charged).
Before Using the Product
5
Before Using the Product
Safety Precautions
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
z
An electric shock or fire may result.
Do not plug many products into the same power socket.
z
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
z
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
z
An unstable connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
!
z
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
z
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
z
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
!
z
Otherwise, a fire may result.
Before Using the Product
6
Before Using the Product
Caution
Do not unplug the power cord when the product is in use.
z
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
z
!
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
z
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
!
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
z
An electric shock or fire may result.
!
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
z
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
z
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
!
z
Children may suffocate.
Before Using the Product
7
Before Using the Product
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
z
The product may fall and break or cause a personal injury.
z
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
z
!
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
z
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
z
The product may fall and injure children.
Caution
Take care not to drop the product when moving it.
z
Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.
z
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
z
The product may fall and break or cause a personal injury.
z
Install the product only on cabinets or shelves of the right size.
Before Using the Product
8
Before Using the Product
Put down the product carefully.
z
The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
z
Be sure to consult Samsung Customer Service Center (81page) before
installation if you want to install the product at such a place.
Operation
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
z
An electric shock or fire may result.
z
Contact Samsung Customer Service Center (81page) for repair.
Before moving the product, turn off the power switch and disconnect the power
cable and all other connected cables.
!
z
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center
(81page).
!
z
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
z
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (81page).
z
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
z
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
9
Before Using the Product
During a lightning or thunderstorm, power off the product and remove the power
cable.
z
!
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
z
An electric shock or fire may result.
!
Do not move the product by pulling the power cord or any cable.
z
Otherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
!
GAS
z
Sparks can cause an explosion or fire.
z
During a lightning or thunderstorm, do not touch the power cord or antenna
cable.
Do not lift or move the product by the power cord or any cable.
z
Otherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
!
z
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
z
Otherwise, a fire may result from an increased internal temperature.
Before Using the Product
10
Before Using the Product
100
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
z
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (81page).
z
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
z
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (81page).
z
Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
z
!
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
-_!
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
z
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
z
Your eyesight may deteriorate.
!
Do not put DC power adapters together.
z
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
z
Otherwise, a fire may result.
Before Using the Product
11
Before Using the Product
Do not let water enter the DC power device or get the device wet.
z
An electric shock or fire may result.
z
Avoid using the product outdoors where it can be exposed to rain or snow.
z
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
z
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
!
Do not hold the monitor upside-down or move it by holding the stand.
z
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
z
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
z
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
!
Before Using the Product
12
Before Using the Product
Exercise caution when adjusting the product angle or stand height.
!
z
Otherwise, children's fingers or hands may become stuck and injured.
z
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
z
Product failure or personal injure may result.
Correct posture to use the product
Use the product in the correct posture as follows:
z
Straighten your back.
z
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
z
Adjust the angle so light does not reflect on the screen.
z
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
z
Keep your elbows at about a right angle.
z
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
13
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
CONNECTING AND USING
A SOURCE DEVICE
2
Copyright
3
3
Icons used in this manual
Symbols for safety precautions
4
Cleaning
4
5
5
Cleaning
Securing the Installation Space
Precautions for storage
6
Safety Precautions
6
7
9
Electricity and Safety
Installation
Operation
13
Correct posture to use the product
18
Checking the Contents
18
19
Removing the Packaging
Checking the Components
20
Parts
20
22
Frontal Buttons
Reverse Side
23
Installation
23
24
24
25
26
Attaching the Stand
Adjusting the Product Tilt and Height
Rotating the Monitor Screen
Installing a Wall-mount Kit or Desktop Stand
Anti-theft Lock
27
"MagicRotation Auto"
28
Before Connecting
28
Pre-connection Checkpoints
Table Of Contents
14
Table Of Contents
SCREEN SETUP
CONFIGURING TINT
29
Connecting and Using a PC
29
30
31
32
Connecting to a PC
Driver Installation
Setting Optimum Resolution
Changing the Resolution Using a PC
35
Connecting Headphones
36
Connecting the Product to a PC as a
USB HUB
36
36
Connecting a PC to the Product
Utilizing the Product as a USB HUB
37
Connecting the Power
38
MAGIC
38
39
SAMSUNG MAGIC Bright
SAMSUNG MAGIC Color
40
Brightness
40
Configuring Brightness
41
Contrast
41
Configuring Contrast
42
Sharpness
42
Configuring Sharpness
43
Response Time
43
Configuring Response Time
44
Red
44
Configuring Red
45
Green
45
Configuring Green
46
Blue
46
Configuring Blue
47
Color Tone
47
Configuring the Color Tone Settings
Table Of Contents
15
Table Of Contents
RESIZING OR
RELOCATING THE
SCREEN
SETUP AND RESET
48
Gamma
48
Configuring Gamma
49
PBP
49
50
Mode
Contrast
51
Image Size
51
Changing the Picture Size
52
H-Position & V-Position
52
Configuring H-Position or V-Position
53
ECO
53
55
58
59
Eco Motion Sensor
Eco Light Sensor
Eco Saving
Eco Icon Display
61
Menu Transparency
61
Changing Menu Transparency
62
Language
62
Changing the Language
63
PC/AV Mode
63
Configuring PC/AV Mode
64
Auto Source
64
Configuring Auto Source
65
Display Time
65
Configuring Display Time
66
Key Repeat Time
66
Configuring Key Repeat Time
67
Customized Key
67
Configuring Customized Key
Table Of Contents
16
Table Of Contents
INFORMATION MENU AND
OTHERS
TROUBLESHOOTING
GUIDE
SPECIFICATIONS
APPENDIX
68
Off Timer On/Off
68
Configuring Off Timer On/Off
69
Off Timer Setting
69
Configuring Off Timer Setting
70
Reset
70
Initializing Settings (Reset)
71
INFORMATION
71
Displaying INFORMATION
71
Configuring Brightness in the Startup
Screen
72
Requirements Before Contacting
Samsung Customer Service Center
72
72
72
Testing the Product
Checking the Resolution and Frequency
Check the followings.
75
Q&A
77
General
78
PowerSaver
79
Standard Signal Mode Table
81
Contact SAMSUNG WORLDWIDE
86
Correct Disposal of This Product
(Waste Electrical & Electronic
Equipment)
87
Terminology
INDEX
Table Of Contents
17
1
1.1
Preparations
Checking the Contents
1.1.1 Removing the Packaging
1
Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2
Remove the Styrofoam from the product.
3
Check the components and remove the Styrofoam and plastic bag.
4
z
The appearance of actual components may differ from the image shown.
z
This image is for reference only.
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
18
1
Preparations
1.1.2 Checking the Components
z
Contact the dealer from whom you purchased the product if any item is missing.
z
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick Setup Guide
Warranty Card
User Manual
(Not available in all locations)
Power cable
DC power adapter
USB 3.0 cable
Dual-link DVI cable
DP cable (optionally)
Stand base
Components may differ in different locations.
Items sold separately
The following items can be purchased at your nearest retailer.
HDMI-DVI cable
Stereo cable
1 Preparations
19
1
1.2
Preparations
Parts
1.2.1 Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons
Description
z
Open or close the onscreen display (OSD) menu, or return to the last
menu.
z
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [
] for five
seconds.
To unlock the locked OSD control, press the MENU button [
]
for more than five seconds.
If the OSD control is locked,
z
Brightness and Contrast can be adjusted, and INFORMATION
can be viewed.
z
The function that was configured as Customized Key before
locking the OSD control can be used by pressing the [
] button.
1 Preparations
20
1
Preparations
Icons
Description
Configure Customized Key and press [
enabled.
z
]. The following options will be
ECO - MAGIC - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Adjust the screen brightness.
Volume can be adjusted if a cable is connected to the [DP IN] or
[AUDIO IN] port.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Digital1/Digital2/DisplayPort). If you power on
the product or change the input source by pressing the [
] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Separate the screen in half and display output from two different source
devices simultaneously on the left and right sides of the screen.
Turn the screen on or off.
Power Indicator
The power indicator will be lit when the product is operating normally.
z
Refer to "9.2 PowerSaver"for details about the power-saving
function.
z
To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
1 Preparations
21
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port
Description
Connects to the DC power adapter.
Connects to a PC via a DVI cable.
Connects to a PC via a DP cable.
Connect to a USB device. Compatible with a USB cable version 3.0
or lower.
Connects to the stereo cable
Connects to an audio output device such as headphones.
Connects to a PC via a USB cable.
This port can only connect to a PC.
1 Preparations
22
1
1.3
Preparations
Installation
1.3.1 Attaching the Stand
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Insert the stand base into the
stand in the direction of the
arrow.
Do not remove the fixing pin until
you are finished attaching the
stand.
Tightly fasten the screw to the
bottom of the base.
After installing the stand, place
the product upright.
You can remove the fixing pin
and adjust the stand now.
- Caution
Do not hold the product upside
down only by the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
23
1
Preparations
1.3.2 Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
z
To adjust the height, remove the fixing pin.
z
The monitor tilt and height can be adjusted.
z
Hold the top center of the product and adjust the height carefully.
1.3.3 Rotating the Monitor Screen
You can rotate your monitor as shown below.
z
Be sure to fully extend the stand before rotating the monitor.
z
If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.
z
Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
24
1
Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Unfasten the screw from the
back of the product.
Lift and detach the stand.
Installing a Wall-mount Kit or Desktop Stand
2
1
A
3
4
B
A Attach the wall-mount kit or desktop stand here
B Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
1 Preparations
25
1
Preparations
Notes
z
Using a screw longer than the standard length can damage the internal components of the
product.
z
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
z
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
z
Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
z
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
z
Be sure to use a wall-mount kit that complies with the standards.
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details.
The lock device is sold separately.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object
such as a desk.
2
3
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of
the product.
4
Lock the locking device.
z
An anti-theft locking device can be purchased separately.
z
Refer to the user guide provided with your anti-theft locking device for details.
z
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
26
1
1.4
Preparations
"MagicRotation Auto"
The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor
and rotates the Windows screen accordingly.
[Software Installation]
1
2
Insert the user manual CD provided with the product into the CD-ROM drive.
Follow the instructions given on the screen to proceed with installation.
After installation, the on-screen display (OSD) menu will be displayed in the language of the operating
system.
(This complies with the basic policies of Windows.)
[Caution]
1
2
Compatible only with Windows 7 (32 bits or 64 bits)
Compatible with a graphics card that complies with the DDC/CI and MS API standards
With a graphics card that does not comply with the aforementioned standards, the "MagicRotation
Auto" function may not be available.
3
4
To maximize the performance of the function, update the graphics card driver to the latest version.
Fourteen languages are available as installation languages.
(QJOLVK)UDQoDLV'HXWVFK0DJ\DU,WDOLDQR3ROVNL3RUWXJXrV
ƧNJLjLjǁƿǀ(VSDxRO6YHQVND7UNoHᣣᧄ⺆㩷∝䇁ଞ˲߭
5
If the orientation is set to a mode other than "Landscape" in the screen resolution menu on Windows
7, the "MagicRotation Auto" function may not work properly.
6
The OSD menu will be displayed if the monitor is rotated. When the monitor is rotated, the screen
reconfiguration process may be displayed or screen burn-in may appear, depending on the graphics
card. This is performed by the Windows operating system and has nothing to do with the product.
7
If you do not want the screen to rotate automatically when the monitor is rotated, press the Windows
and L keys at the same time to lock the Windows operating system. If the operating system cannot
be locked, it is due to the constraints of Windows API and has nothing to do with the product.
1 Preparations
27
2
2.1
Connecting and Using a Source Device
Before Connecting
2.1.1 Pre-connection Checkpoints
z
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
z
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
z
Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device
28
2
2.2
Connecting and Using a Source Device
Connecting and Using a PC
2.2.1 Connecting to a PC
z
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection using a Dual-link DVI cable (digital type)
DVI IN
1
2
Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
Connect the DC power adapter to the product and a power socket, and turn on the power switch
on the PC.
(For details, refer to "2.5 Connecting the Power".)
3
Press [
] on the product to change the input source to Digital1 or Digital2.
z
Audio is not available if the PC and product are connected via the [DVI] port.
z
Refer to "2.3 Connecting Headphones" for details on how to enable sound.
Connection Using the DP Cable
DP IN
1
Connect one end of the DP cable to the [DP IN] port on the side of the product and the other end to
the DP port on the PC.
2
Connect the DC power adapter to the product and a power socket, and turn on the power switch
on the PC.
(For details, refer to "2.5 Connecting the Power".)
3
Press [
] to change the input source to DisplayPort.
2 Connecting and Using a Source Device
29
2
Connecting and Using a Source Device
If audio is supported, the Volume can be adjusted using the [
] buttons on the front of the product.
2.2.2 Driver Installation
z
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers for this product.
z
An installation driver is contained on the CD supplied with the product.
z
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
1
2
3
4
Insert the user manual CD provided with the product into the CD-ROM drive.
5
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Click "Windows Driver".
Follow the instructions given on the screen to proceed with installation.
Select your product model from the list of models.
Refer to your Windows OS manual for further details.
2 Connecting and Using a Source Device
30
2
Connecting and Using a Source Device
2.2.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
The optimal resolution for this monitor is as follows:
2560 x 1440 60Hz
Follow the above settings to set the resolution.
(QJOLVK
/DQJXDJH
1
2
Press [
(QWHU
] to move to the language you want and press the [
To hide the information message, press [
].
].
z
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
z
The optimum resolution (2560 x 1440) can also be selected in Control Panel on your PC.
z
The optimum resolution of (2560 x 1440) is supported through the dual-link DVI and DP cables
only.
2 Connecting and Using a Source Device
31
2
Connecting and Using a Source Device
2.2.4 Changing the Resolution Using a PC
z
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture
quality.
z
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings and change the resolution.
2 Connecting and Using a Source Device
32
2
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel
Personalization
Display Settings and change the resolution.
2 Connecting and Using a Source Device
33
2
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution and change the resolution.
2 Connecting and Using a Source Device
34
2
2.3
Connecting and Using a Source Device
Connecting Headphones
AUDIO IN
1
Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT
port on the PC.
If the stereo cable is connected, the Volume can be adjusted using the [
] buttons on the front
of the product.
2
Connect an audio output device such as headphones or speakers to [
] on the product.
2 Connecting and Using a Source Device
35
2
2.4
Connecting and Using a Source Device
Connecting the Product to a PC as a USB HUB
2.4.1 Connecting a PC to the Product
The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source
device directly to the product and control the device from the product, without having to connect the
device to the PC.
To use the product as a USB hub, connect the product to a PC using a USB cable.
Connect the USB cable to [
] on the back of the product and USB [
] on the PC.
A USB 2.0 cable can be used to connect the product to a PC. However, the PC should support USB
3.0 for the USB 3.0 function to work fully.
2.4.2 Utilizing the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
A PC cannot connect to multiple source devices at the same time as it has a limited number of input/
output ports available. The HUB feature on the product will improve your work efficiency by allowing you
to connect multiple source devices to the USB ports on the product at the same time without connecting
them to a PC.
If multiple source devices are connected to the PC, the many cables around the PC may look messy.
Connecting the devices directly to the product will resolve such inconvenience.
An external mass-storage HDD requires external power supply. Be sure to connect it to a power
source.
2 Connecting and Using a Source Device
36
2
2.5
Connecting and Using a Source Device
Connecting the Power
Put the DC power adapter in the groove, with the switch
facing upward.
- Push the adapter until you hear a “click.”
Connect the power cable to the DC power adapter. Next,
connect the DC power adapter to the product.
Plug in the power cable to the power socket.
- Removing the DC power adapter
To remove the DC power adapter, lift it outwards from the
bottom as shown in the image.
When using the adapter without fixing it to the back of the monitor, the adapter jack can easily get
disconnected or the cable may break. Be sure to securely fix the adapter in the groove.
2 Connecting and Using a Source Device
37
3
3.1
Screen Setup
Configure the screen settings such as brightness and color tone.
MAGIC
This feature optimizes the brightness and colors according to how the product will be used.
3.1.1
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when Eco Light Sensor or Eco Saving is set to On.
z
This menu is not available when PBP is set to On.
SAMSUNG
Configuring MAGIC
Bright
1
2
3
4
Press [
] on the product.
Press [
] to move to PICTURE and press [
] on the product.
Press [
] to move to MAGIC and press [
Press [
SAMSUNG
] to move to MAGIC
Bright and press [
] on the product.
] on the product.
The following screen will appear.
MAGIC
SAMSUNG
MAGIC Bright
SAMSUNG
MAGIC Color
Return
: Custom
6WDQGDUG
*DPH
:
&LQHPD
'\QDPLF&RQWUDVW
Move
Enter
z
Custom: Customize the contrast and brightness as required.
z
Standard: Obtain a picture quality suitable for editing documents or using Internet.
z
Game: Obtain a picture quality suitable for playing games that involve many graphic effects and
dynamic movements.
z
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD
content.
z
5
6
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
3 Screen Setup
38
3
Screen Setup
3.1.2
SAMSUNG MAGIC Color
SAMSUNG
MAGICColor
is a new picture-quality improvement technology developed independently by Samsung,
which delivers vivid natural colors without picture quality degradation.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
This menu is not available when PBP is set to On.
SAMSUNG
Configuring MAGIC
Color
1
2
3
4
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to MAGIC and press [
Press [
SAMSUNG
] to move to MAGIC
Color and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
MAGIC
SAMSUNG
MAGIC Bright
: Custom
SAMSUNG
: 2II
'HPR
Full
Intelligent
MAGIC Color
Return
5
6
Move
Enter
SAMSUNG
z
Off: Disable MAGICColor.
z
SAMSUNG
Demo: Compare normal screen mode with MAGIC
Color mode.
z
Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture.
z
Intelligent: Improve the chroma for all areas except the flesh colors in the picture.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
3 Screen Setup
39
3
3.2
Screen Setup
Brightness
Adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
z
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
z
This menu is not available when Eco Light Sensor or Eco Saving is set to On.
3.2.1 Configuring Brightness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Brightness and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
MAGIC
೛
%ULJKWQHVV
&RQWUDVW
6KDUSQHVV
5HVSRQVH7LPH
)DVWHU
5HWXUQ
4
Adjust the Brightness using the [
$GMXVW
(QWHU
] button.
3 Screen Setup
40
3
3.3
Screen Setup
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
3.3.1 Configuring Contrast
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
MAGIC
೛
Brightness
Contrast
Sharpness
Response Time
Faster
Return
4
Adjust the Contrast using the [
Adjust
Enter
] button.
3 Screen Setup
41
3
3.4
Screen Setup
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when PBP is set to On.
3.4.1 Configuring Sharpness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Sharpness and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
MAGIC
೛
Brightness
Contrast
Sharpness
Response Time
Faster
Return
4
Adjust the Sharpness using the [
Adjust
Enter
] button.
3 Screen Setup
42
3
3.5
Screen Setup
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
z
It is best to set Response Time to Normal or Faster when you are not viewing a movie.
z
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
z
This menu is not available when PBP is set to On.
3.5.1 Configuring Response Time
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
] on the product.
Press [
] to move to Response Time and press [
] on the product.
The following screen will appear.
PICTURE
MAGIC
೛
Brightness
Contrast
Sharpness
Response Time
Normal
Faster
Fastest
Return
4
5
Press [
Move
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
3 Screen Setup
43
4
Configuring Tint
SAMSUNG
Adjust the tint of the screen. This menu is not available when MAGIC
Bright is set to Cinema or
Dynamic Contrast mode.
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when PBP is set to On.
4.1.1 Configuring Red
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Red and press [
] on the product.
] on the product. The following screen will appear.
COLOR
Red
50
Green
50
Blue
Color Tone
Normal
Gamma
4.1
Mode1
Return
4
Adjust the Red using the [
50
Adjust
Enter
] button.
4 Configuring Tint
44
4
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when PBP is set to On.
4.2.1 Configuring Green
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Green and press [
] on the product.
] on the product. The following screen will appear.
COLOR
Red
50
Green
50
Blue
Color Tone
Normal
Gamma
4.2
Configuring Tint
Mode1
Return
4
Adjust the Green using the [
50
Adjust
Enter
] button.
4 Configuring Tint
45
4
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when PBP is set to On.
4.3.1 Configuring Blue
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Blue and press [
] on the product.
] on the product. The following screen will appear.
COLOR
Red
50
Green
50
Blue
Color Tone
Normal
Gamma
4.3
Configuring Tint
Mode1
Return
4
Adjust the Blue using the [
50
Adjust
Enter
] button.
4 Configuring Tint
46
4
Color Tone
Adjust the general color tone of the picture.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
This menu is not available when PBP is set to On.
4.4.1 Configuring the Color Tone Settings
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Color Tone and press [
] on the product.
] on the product.
The following screen will appear.
COLOR
Red
Green
50
Blue
50
Color Tone
Gamma
Return
4
5
4.4
Configuring Tint
50
Cool 2
Cool 1
Normal
Warm 1
Warm 2
Custom
Adjust
Enter
z
Cool2: Set the color temperature to be cooler than Cool1.
z
Cool1: Set the color temperature to be cooler than Normal mode.
z
Normal: Display the standard color tone.
z
Warm1: Set the color temperature to be warmer than Normal mode.
z
Warm2: Set the color temperature to be warmer than Warm1.
z
Custom: Customize the color tone.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
4 Configuring Tint
47
4
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
This menu is not available when PBP is set to On.
4.5.1 Configuring Gamma
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
] on the product.
Press [
] to move to Gamma and press [
] on the product.
The following screen will appear.
COLOR
Red
50
Green
50
Blue
Color Tone
1RUPDO
Gamma
4.5
Configuring Tint
Mode1
Mode2
Mode3
Return
4
5
Press [
50
Adjust
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
4 Configuring Tint
48
5
PBP
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
Compatible with Windows 7 only.
5.1.1 Mode
1
2
3
4
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
Press [
] to move to PBP and press [
Press [
] to move to Mode and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
PBP
5.1
Resizing or Relocating the Screen
Mode
Contrast
Return
Off
On
Move
Enter
Input signal
5
6
Press [
Left side of the screen
Digital1 or DisplayPort
Right side of the screen
Digital2
] to move to the option you want and press the [
].
The selected option will be applied.
If the PBP function is active
z
The left and right images will appear one after the other.
z
Press SOURCE. The input source (Digital1
DisplayPort) for the left screen will be changed. The
screen may flicker if the input signal is unstable.
z
The optimum resolution for the left and right sides of the screen is 1280x1440 (width x height).
z
To display the left side of the screen in full-screen mode, press the [
z
Only the Eco item is enabled for Customized Key.
] button.
5 Resizing or Relocating the Screen
49
5
Resizing or Relocating the Screen
z
The PBP function may not be available depending on the specifications of the graphics card used.
If the screen is blank in PBP mode when the optimum resolution (1280 x 1440) is selected, go to
Control Panel
Display
Screen Resolution and click Detect on the PC.
(Instructions are based on Windows 7.)
If the screen is blank when the resolution is set to 1280 x 1440, change the resolution to 1280 x
1024.
(For further details on how to configure the resolution, refer to "2.2.4
Changing the Resolution
Using a PC".)
5.1.2
1
2
3
4
Contrast
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
Press [
] to move to PBP and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
PBP
Mode
Contrast
Return
5
6
Press [
2Q
50
Adjust
Enter
] to move to the option you want and press the [
].
The selected option will be applied.
5 Resizing or Relocating the Screen
50
5
5.2
Resizing or Relocating the Screen
Image Size
Change the picture size.
This menu is not available when PBP is set to On.
5.2.1 Changing the Picture Size
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
Press [
] to move to Image Size and press [
] on the product.
] on the product.
The following screen will appear.
SIZE&POSITION
▶
PBP
Image Size
H-Position
Auto
Wide
V-Position
Return
Move
Enter
z
Auto: Display the picture according to the aspect ratio of the input source.
z
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
SIZE&POSITION
▶
PBP
Image Size
H-Position
4:3
Wide
Screen Fit
V-Position
Return
Move
Enter
z
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
z
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
z
Screen Fit: Display the picture with the original aspect ratio without cutting off.
Requirements to activate Image Size
4
5
z
When connecting to digital output device via DVI/DP cable
z
When signal resolution is 480p, 576p , 720p, 1080i, 1080p
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
5 Resizing or Relocating the Screen
51
5
5.3
Resizing or Relocating the Screen
H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
z
This menu is only available when Image Size is set to Screen Fit.
z
This menu is not available when PBP is set to On.
5.3.1 Configuring H-Position or V-Position
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
] on the product.
Press [
] to move to H-Position or V-Position and press [
] on the product.
The following screen will appear.
SIZE&POSITION
SIZE&POSITION
▶
PBP
Image Size
Screen Fit
H-Position
V-Position
Return
4
Press [
Move
▶
PBP
Image Size
Screen Fit
3
H-Position
3
3
V-Position
3
Enter
Return
Move
Enter
] to configure H-Position or V-Position.
5 Resizing or Relocating the Screen
52
6
6.1
Setup and Reset
ECO
The Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu
page so that you can conveniently configure the power saving settings.
6.1.1
Eco Motion Sensor
The Eco Motion Sensor activates to save power when it does not detect any movement within a
specified area for a specified period of time.
Eco Motion Sensor is not available when the monitor is used in portrait mode.
Configuring Eco Motion Sensor
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Eco Motion Sensor and press [
] on the product.
] on the product.
].
The following screen will appear.
ECO
Eco Motion Sensor
೛Backlight
Eco Light Sensor
೛Sensitivity
Off
5 Min
10 Min
20 Min
30 Min
1h
೛Brightness Level
Eco Saving
Off
Eco Icon Display
Off
Return
Move
Enter
This option is disabled if the product is connected to a PC that is in power-saving mode.
z
Off: Deactivate the Eco Motion Sensor function.
z
5 Min: Automatically turn off the power if the sensor has not detected any movement of an
object or person for 5 minutes within the specified range of detection.
z
10 Min: Automatically turn off the power if the sensor has not detected any movement of an
object or person for 10 minutes within the specified range of detection.
z
20 Min: Automatically turn off the power if the sensor has not detected any movement of an
object or person for 20 minutes within the specified range of detection.
z
30 Min: Automatically turn off the power if the sensor has not detected any movement of an
object or person for 30 minutes within the specified range of detection.
z
1 h: Automatically turn off the power if the sensor has not detected any movement of an object
or person for 1 hour within the specified range of detection.
5
Press [
] to move to the option you want and press the [
].
6 Setup and Reset
53
6
Setup and Reset
6
The selected option will be applied.
Configuring Backlight
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Backlight and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
ECO
Eco Motion Sensor
: 5 Min
೛Backlight
Eco Light Sensor
Off
Dimming
೛Sensitivity
೛Brightness Level
Eco Saving
Off
Eco Icon Display
Off
Return
Move
Enter
Off: Turn off the screen and activate DPMS mode. If Off is selected, it takes several seconds for
z
the monitor to detect movement and turn on after it turned off.
Dimming: Reduce the brightness of the screen (still turned on).
z
5
6
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
z
The performance of Eco Motion Sensor is maximized to a specific user distance (1m) and angle
(40 degrees).
z
The sensor may not detect you if you are motionless.
z
If you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor or turn the Eco Icon Display Off.
z
Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.
6 Setup and Reset
54
6
Setup and Reset
6.1.2
Eco Light Sensor
The Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting
the screen brightness depending on the ambient light intensity.
z
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
z
This menu is not available when Eco Saving is set.
Configuring Eco Light Sensor
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Eco Light Sensor and press [
] on the product.
] on the product.
].
The following screen will appear.
ECO
Eco Motion Sensor
5 Min
೛%DFNOLJKW
Off
Eco Light Sensor
ϩࡸ
Off
On
೛Sensitivity
೛Brightness Level
Eco Saving
Off
Eco Icon Display
Off
Return
5
6
Move
Enter
z
Off: Deactivate the Eco Light Sensor function.
z
On: Automatically adjust the brightness according to the ambient light intensity.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
55
6
Setup and Reset
Configuring Sensitivity
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Sensitivity and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
ECO
Eco Motion Sensor
: 5 Min
೛%DFNOLJKW
Off
Eco Light Sensor
On
೛Sensitivity
High
Medium
Low
೛Brightness Level
Eco Saving
Eco Icon Display
Off
Return
z
Move
Enter
High: High sensitivity that maximizes the varying level of screen brightness depending on the
ambient light intensity.
z
Medium: Intermediate sensitivity that sets a varying level of screen brightness between High
and Low depending on the ambient light intensity.
z
Low: Low sensitivity that minimizes the varying level of screen brightness depending on the
ambient light intensity.
5
6
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
56
6
Setup and Reset
Configuring Brightness Level
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Brightness Level and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
ECO
Eco Motion Sensor
5 Min
೛Backlight
Off
Eco Light Sensor
On
೛Sensitivity
High
೛%ULJKWQHVV/HYHO
Brighter
Current
Dimmer
Off
Eco Saving
Eco Icon Display
Return
5
6
Move
z
Brighter: Increase the current brightness of the screen.
z
Current: Maintain the current brightness of the screen.
z
Dimmer: Decrease the current brightness of the screen.
Press [
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
57
6
Setup and Reset
6.1.3
Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the
monitor panel.
z
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
z
This menu is not available when Eco Light Sensor is set.
Configuring Eco Saving
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Eco Saving and press [
] on the product.
] on the product.
] on the product. The following screen will
appear.
ECO
Eco Motion Sensor
5 Min
೛Backlight
Off
Eco Light Sensor
Off
೛Sensitivity
೛Brightness Level
Eco Saving
Eco Icon Display
ଥࢿ
Off
Return
5
6
Move
Enter
z
75%: Change the monitor power consumption to 75% of the default level.
z
50%: Change the monitor power consumption to 50% of the default level.
z
Off: Deactivate the Eco Saving function.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
58
6
Setup and Reset
6.1.4
Eco Icon Display
Configuring Eco Icon Display
1
2
3
4
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to ECO and press [
Press [
] to move to Eco Icon Display and press [
] on the product.
] on the product.
].
The following screen will appear.
ECO
Eco Motion Sensor
5 Min
೛Backlight
Dimming
Eco Light Sensor
Off
೛Sensitivity
೛Brightness Level
Eco Saving
Eco Icon Display
Return
5
6
Off
ଥࢿ
On
Move
Enter
z
Off: Disable the Eco Icon Display function.
z
On: Display the operation status of the Eco sensor as a pop-up guide.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
Eco Motion Sensor Activated
w–žŒ™Gv
z
sec
If the monitor is left idle for the period of time to which the off timer is configured when Eco
Motion Sensor is enabled, Eco Motion Sensor will activate and switch the monitor to powersaving mode.
z
A 10-second countdown timer will start along with the above picture before the power-saving
mode activates showing the operation status of the Eco Motion Sensor.
Eco Light Sensor Activated
z
Eco Light Sensor Activated
If the screen brightness is adjusted according to the ambient light intensity when the Eco Light
Sensor is on, a pop-up as shown above will appear showing the adjusting screen brightness.
z
If the screen becomes brighter as the ambient light becomes brighter, the brightness slide bar
level will increase with a sun image displayed. If the screen becomes darker, the brightness slide
6 Setup and Reset
59
6
Setup and Reset
bar level will decrease with a moon image displayed. The brightness slide bar will be displayed
for 3 seconds after the sensor activates.
You've saved
* tree(s).
z
A pop-up as shown above will appear when an energy tree completes while Eco Icon Display
is On.
If the above picture is displayed, it means the Eco Icon Display option is On. Change this
setting to Off if you do not want to display the pop-up.
z
The amount of energy saved by the Eco Motion Sensor, Eco Light Sensor, and Eco Saving
functions will accumulate and the progress can be viewed as a growing energy tree.
The energy tree grows as the energy savings of the monitor accumulate. Accordingly, the
tree's growth will also be affected by other functions that involve power consumption such as
the brightness control function.
z
The amount of energy savings accumulated by using the power-saving functions, such as Eco
Motion Sensor, Eco Light Sensor and Eco Saving, will be calculated and represented as an
amount of carbon dioxide.
z
A complete energy tree will be displayed when the amount of energy savings accumulates to as
much as the amount of carbon dioxide a tree absorbs in a year. This shows that your energy
saving is as effective as planting a tree so that you can easily understand the accumulation of
energy savings over time and its effect by viewing the progress of a tree growing.
z
The progress of a tree growing will be represented as 10 different images (stages). After one
full-grown tree is complete, the initial image will be restored and the number of trees will
continue to accumulate. The number for energy trees will be rounded to one decimal place.
6 Setup and Reset
60
6
6.2
Setup and Reset
Menu Transparency
Set the transparency for the menu windows:
6.2.1 Changing Menu Transparency
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Menu Transparency and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
ECO
Language
PC/AV Mode
PC
Auto Source
Auto
Display Time
20 sec
Key Repeat Time
Acceleration
Return
4
5
Press [
೛
Off
On
3&
Menu Transparency
Move
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
61
6
6.3
Setup and Reset
Language
Set the menu language.
z
A change to the language setting will only be applied to the onscreen menu display.
z
It will not be applied to other functions on your PC.
6.3.1 Changing the Language
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Language and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
ECO
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
Key Repeat Time
Return
4
5
Press [
'HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
ଞ˲߭
,WDOLDQR
0DJ\DU
3ROVNL
3RUWXJXrV
ƧNJLjLjǁƿǀ
6YHQVND
7UNoH
ᣣᧄ⺆
ଞ˲߭
∝䇁
Move
Enter
] to move to the language you want and press the [
].
The selected option will be applied.
6 Setup and Reset
62
6
6.4
Setup and Reset
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
This menu is not available when PBP is set to On.
6.4.1 Configuring PC/AV Mode
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to PC/AV Mode and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
೛
ECO
Menu Transparency
On
Language
English
PC/AV Mode
Auto Source
PC
AV
Display Time
20 sec
Key Repeat Time
Acceleration
Return
4
5
Press [
Move
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
63
6
6.5
Setup and Reset
Auto Source
Activate Auto Source.
This menu is not available when PBP is set to On.
6.5.1 Configuring Auto Source
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Auto Source and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
೛
ECO
Menu Transparency
On
Language
English
PC/AV Mode
3&
Auto Source
Display Time
Auto
0DQXDO
Key Repeat Time
Acceleration
Return
4
5
Move
z
Auto: The input source is automatically recognized.
z
Manual: Manually select an input source.
Press [
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
64
6
6.6
Setup and Reset
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
6.6.1 Configuring Display Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Display Time and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
೛
ECO
Menu Transparency
On
Language
English
PC/AV Mode
3&
Auto Source
Display Time
Key Repeat Time
Return
4
5
Press [
5 sec
10 sec
20 sec
200 sec
Move
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
65
6
6.7
Setup and Reset
Key Repeat Time
Control the response rate of a button when the button is pressed.
6.7.1 Configuring Key Repeat Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Key Repeat Time and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
೛
ECO
Menu Transparency
On
Language
English
PC/AV Mode
3&
Auto Source
Display Time
Key Repeat Time
Return
z
Acceleration
sec
sec
No Repeat
Move
Enter
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4
5
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
66
6
6.8
Setup and Reset
Customized Key
You can set Customized Key to the mode you want as follows.
This menu is not available when PBP is set to On.
6.8.1 Configuring Customized Key
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Customized Key and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
Customized Key
Off Timer On/Off
ECO
MAGIC
Image Size
Off Timer Setting
Reset
Return
z
4
5
Move
Enter
ECO - MAGIC - Image Size
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
67
6
6.9
Setup and Reset
Off Timer On/Off
Enable or disable the off timer that automatically powers off the product.
6.9.1 Configuring Off Timer On/Off
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer On/Off and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
Customized Key
ECO
Off Timer On/Off
Ѱ࢖
Off
On
Off Timer Setting
Reset
Return
4
5
Move
Enter
z
Off: Deactivate the off timer so that the product does not power off automatically.
z
On: Activate the off timer so that the product powers off automatically.
Press [
] to move to the option you want and press the [
].
The selected option will be applied.
6 Setup and Reset
68
6
Setup and Reset
6.10 Off Timer Setting
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the
specified number of hours.
This menu is only available when Off Timer On/Off is set to On.
6.10.1 Configuring Off Timer Setting
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer Setting and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
Customized Key
ECO
Off Timer On/Off
On
Off Timer Setting
4h
Reset
Return
4
Press [
Adjust
Enter
] to configure Off Timer Setting.
6 Setup and Reset
69
6
Setup and Reset
6.11 Reset
Return all the settings for the product to the default factory settings.
This menu is not available when PBP is set to On.
6.11.1 Initializing Settings (Reset)
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Reset and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
Customized Key
ECO
Off Timer On/Off
Off
Off Timer Setting
Reset
No
Yes
Return
4
5
Press [
Move
] to move to the option you want and press the [
Enter
].
The selected option will be applied.
6 Setup and Reset
70
7
7.1
INFORMATION Menu and Others
INFORMATION
View the current input source, frequency and resolution.
7.1.1 Displaying INFORMATION
1
2
Press [
Press [
] on the product.
] to move to INFORMATION.
The current input source, frequency and resolution will appear.
PICTURE
COLOR
'LJLWDO
SIZE&POSITION
N+]+]11
[
SETUP&RESET
INFORMATION
Move
Exit
7.2
Enter
Configuring Brightness in the Startup Screen
Adjust Brightness using the [
] button in the startup screen where there is no on screen display menu
available.
1
Press [
] in the startup screen. The following screen will appear.
Brightness
Exit
2
Adjust the Brightness using the [
100
Adjust
Enter
] button.
Volume can be adjusted if a cable is connected to the [DP IN] or [AUDIO IN] port.
7 INFORMATION Menu and Others
71
8
8.1
Troubleshooting Guide
Requirements Before Contacting Samsung Customer
Service Center
8.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1
2
3
4
Power off both the PC and product.
Disconnect the cable from the product.
Power on the product.
If the Check Signal Cable message appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
8.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "9.3 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
8.1.3 Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product
and PC, and ensure the connection is secure.
(Refer to "2.2 Connecting and Using a PC")
Screen issue
The power LED is off.
The screen will not switch on.
Check that the power cable is connected
correctly (Refer to "2.2 Connecting and Using a
PC")
The message Check Signal Cable appears.
Check that the cable is properly connected to the
product. (Refer to "2.2 Connecting and Using a
PC")
Check that the device connected to the product is
powered on.
8 Troubleshooting Guide
72
8
Troubleshooting Guide
Screen issue
Not Optimum Mode is displayed.
This message appears if the signal from the
graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to
suit the product performance, referring to
Standard Signal Mode Table (79page).
The images on the screen look distorted.
Check the cable connection to the product (Refer
to "2.2 Connecting and Using a PC")
The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable,
etc) and try again.
Set the resolution and frequency to the
recommended level. (Refer to "9.1 General")
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
Check that the resolution and frequency for the
PC are within the range of resolution and
frequency compatible with the product, and if
required, change the settings, referring to
Standard Signal Mode Table (79page) in this
manual and the INFORMATION menu on the
product.
The screen is too bright. The screen is too dark.
Adjust Brightness(40page) and Contrast(41page).
Screen color is inconsistent.
Change the COLOR settings.
(Refer to "Configuring Tint")
The colors on the screen have a shadow and are
distorted.
Change the COLOR settings.
White does not really look white.
Change the COLOR settings.
(Refer to "Configuring Tint")
(Refer to "Configuring Tint")
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust
the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
8 Troubleshooting Guide
73
8
Troubleshooting Guide
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
8 Troubleshooting Guide
74
8
8.2
Troubleshooting Guide
Q&A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.
z
Windows XP: Select Control Panel
Themes
Display
Settings
Appearance and
Advanced
Monitor, and
adjust Refresh rate under Monitor settings.
z
Windows ME/2000: Select Control Panel
Settings
Advanced
Display
Monitor, and adjust Refresh rate
under Monitor settings.
z
Windows Vista: Select Control Panel
Personalization
Advanced Settings
Personalization
Appearance and
Display Settings
Monitor, and adjust Refresh rate under
Monitor settings.
z
Windows 7: Select Control Panel
Personalization
Advanced settings
Display
Appearance and
Screen Resolution
Monitor, and adjust Refresh rate under
Monitor settings.
8 Troubleshooting Guide
75
8
Troubleshooting Guide
Question
How can I change the
resolution?
Answer
z
Windows XP: Go to Control Panel
Display
z
Appearance and Themes
Settings and adjust the resolution.
Windows ME/2000: Go to Control Panel
Display
Settings
and adjust the resolution.
z
Windows Vista: Go to Control Panel
Personalization
Personalize
Appearance and
Display Settings and adjust
the resolution.
z
Windows 7: Go to Control Panel
Personalization
Display
Appearance and
Adjust Resolution and adjust the
resolution.
How do I set power-saving
mode?
z
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Display
Screen Saver Settings
or BIOS SETUP on the PC.
z
Windows ME/2000: Set power-saving mode in Control Panel
Display
Screen Saver Settings or BIOS SETUP on the
PC.
z
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.
z
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
8 Troubleshooting Guide
76
9
9.1
Specifications
General
Model Name
Panel
Synchronization
Size
27 inches (68 cm)
Display area
596.74mm(H) x 335.66mm(V)
Horizontal
Frequency
31~90 kHz
Vertical
Frequency
56~76 Hz
Display Color
Resolution
S27A850D
16.7 M (True 8 bit)
Optimum
resolution
2560 x 1440 @ 60 Hz
Maximum
resolution
2560 x 1440 @ 60 Hz
Maximum Pixel Clock
270 MHz (DVI-D, DP)
Power Supply
This product uses 100 to 240V. Refer to the label at the back of
the product as the standard voltage can vary in different
countries.
Signal connectors
DVI-Dual x 2, DP
USB
1UP/3DOWN(USB3.0)
Dimensions (W x H x D) / Weight
642.5 X 442.5 X 224.5 mm / 25.3 X 17.4 X 8.8 inches
6.9 kg / 15.2 Ibs
Environmental
considerations
Operating
Temperature : 32˚F ~ 122˚F (0˚C ~ 50˚C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4˚F ~ 140˚F (-20˚C ~ 60˚C)
Humidity : 5 % ~ 90 %, non-condensing
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the
monitor and PC system optimizes the monitor settings. Monitor
installation takes place automatically. However, you can
customize the installation settings if desired.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product,
approximately 1 pixel per million (1ppm) may appear brighter or
darker on the panel. This does not affect product performance.
The above specifications are subject to change without notice to improve quality.
Class B device (broadcast communications device for home use)
9 Specifications
77
9
Specifications
This Class B device designed for home use is registered for EMC requirements and can be used in all
regions.
(USA Only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
9.2
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-savign mode only functions when the product is connected to a PC with a
power-saving function.
PowerSaver
Normal Operation
Power saving mode
Power off
(Power button)
Power Indicator
On
Blinking
Off
Power Consumption
69 W (Without USB : 53 W)
1W
1W
z
The displayed power consumption level can vary in different operating conditions or when settings
are changed.
z
To reduce the power consumption to 0 watts, turn off the power switch on the back of the product
or disconnect the power cable. Be sure to disconnect the power cable when you will not be using
the product for an extended period of time. To reduce the power consumption to 0 watts when the
power switch is not available, disconnect the power cable.
9 Specifications
78
9
9.3
Specifications
Standard Signal Mode Table
This product can be set to only one resolution for each screen size to obtain the optimum picture quality
due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade
the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for
the screen size of your product.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank with the power LED on. In such a case, change the settings according
to the following table by referring to the graphics card user manual.
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350
31.469
70.086
25.175
+/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA,1440 x 900
55.935
59.887
106.500
-/+
9 Specifications
79
9
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA,1600 x 1200
75.000
60.000
162.000
+/+
VESA,1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1200
74.556
59.885
193.250
-/+
VESA, 2560 x 1440(RB)
88.787
59.951
241.500
+/-
z
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
z
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
9 Specifications
80
Appendix
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca
http://www.samsung.com/ch_fr
(French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com
BRAZIL
0800-124-421
4004-0000
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
CHILE
800-SAMSUNG (726-7864)
http://www.samsung.com
From mobile 02-482 82 00
COLOMBIA
01-8000112112
http://www.samsung.com
COSTA RICA
0-800-507-7267
http://www.samsung.com
DOMINICA
1-800-751-2676
http://www.samsung.com
ECUADOR
1-800-10-7267
http://www.samsung.com
EL SALVADOR
800-6225
http://www.samsung.com
GUATEMALA
1-800-299-0013
http://www.samsung.com
HONDURAS
800-27919267
http://www.samsung.com
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com
PANAMA
800-7267
http://www.samsung.com
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
Appendix
81
Appendix
EUROPE
ALBANIA
42 27 5755
http://www.samsung.com
AUSTRIA
0810 - SAMSUNG
(7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be
(Dutch)
http://www.samsung.com/be_fr
(French)
BOSNIA
05 133 1999
http://www.samsung.com
BULGARIA
07001 33 11
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Zrt., česká organizační složka, Oasis Florenc,
Sokolovská394/17, 180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
FINLAND
030 - 6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
01805 - SAMSUNG
(726-7864,€ 0,14/Min)
http://www.samsung.com
CYPRUS
From landline : 8009 4000
http://www.samsung.com
GREECE
From landline : 80111-SAMSUNG
(7267864)
http://www.samsung.com
From landline & mobile : (+30)
210 6897691
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
KOSOVO
+381 0113216899
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MACEDONIA
023 207 777
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900 - SAMSUNG
(0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815-56 480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
http://www.samsung.com
Appendix
82
Appendix
EUROPE
PORTUGAL
808 20 - SAMSUNG (808 20
http://www.samsung.com
7267)
RUMANIA
From landline : 08010-SAMSUNG
http://www.samsung.com
(7267864)
From landline & mobile : (+40)
21 206 01 10
SERBIA
0700 Samsung (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG
http://www.samsung.com
(0800-726 786)
SPAIN
902 - 1 - SAMSUNG
(902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848-SAMSUNG
(7267864, CHF 0.08/min)
http://www.samsung.com/ch
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
LITHUANIA
8-800-77777
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
TURKEY
444 77 11
http://www.samsung.com
http://www.samsung.com/ch_fr
(French)
CIS
RUSSIA
8-800-555-55-55
http://www.samsung.com
GEORGIA
8-800-555-555
http://www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500
(GSM: 7799)
http://www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
MONGOLIA
-
http://www.samsung.com
Appendix
83
Appendix
CIS
UKRAINE
0-800-502-000
http://www.samsung.com/ua
http://www.samsung.com/
ua_ru
BELARUS
810-800-500-55-500
http://www.samsung.com
MOLDOVA
00-800-500-55-500
http://www.samsung.com
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 - 4698
http://www.samsung.com/hk
http://www.samsung.com/
hk_en/
INDIA
1800 1100 11
http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
021-5699-7777
http://www.samsung.com
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864)
for PLDT
http://www.samsung.com
1-800-3-SAMSUNG (726-7864)
for Digitel
1-800-8-SAMSUNG (726-7864)
for Globe
02-5805777
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
THAILAND
1800-29-3232
http://www.samsung.com
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
VIETNAM
1 800 588 889
http://www.samsung.com
Appendix
84
Appendix
MIDDlE EAST
IRAN
021-8255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864)
http://www.samsung.com
KUWAIT
183-2255
http://www.samsung.com
BAHRAIN
8000-4726
http://www.samsung.com
EGYPT
08000-726786
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com
MOROCCO
080 100 2255
http://www.samsung.com
SAUDI ARABIA
9200-21230
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
AFRICA
CAMEROON
7095- 0077
http://www.samsung.com
COTE D'LVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
0302-200077
KENYA
0800 724 000
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
Appendix
85
Appendix
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Appendix
86
Appendix
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as
required. It allows you to change the screen brightness, tint, size and many other settings using
menus displayed on the screen.
HUB
HUB refers to a device that is a common connection point for multiple devices connected over a
network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single
network.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the
brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to
brighter areas on the screen. Changes to the screen brightness are expressed with black and white
variation, and grey scale refers to the medium area between black and white. Changing the grey scale
through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted
as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of
screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that
the screen refreshes 60 times per second. The screen scanning rate depends on the performance of
the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are
transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal
frequency is measured in kHz and represents how many times horizontal lines per second are
transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the
horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal
frequency is indicated in 85kHz.
Appendix
87
Appendix
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and
represents how many images can be created per second by those horizontal lines. A vertical
frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is
also called "refresh rate" and affects screen flicker.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the
level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for
performing multiple tasks at the same time.
E.g. A resolution of 2560 x 1440 consists of 2,560 horizontal pixels (horizontal frequency) and 1,440
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and PC to
produce an optimum display environment.
The monitor uses VESA DDC (international standard) to execute Plug & Play.
Appendix
88
Index
A
INFORMATION 71
Auto Source 64
Installing the Product 23
B
K
Before Connecting 28
Key Repeat Time 66
Blue 46
Brightness 40
L
Languagey 62
C
Checking the Contents 18
Cleaning 4
Color Tone 47
M
MAGIC 38
Menu Transparency 61
Configuring Brightness in the Startup Screen
71
Connecting and Using a PC 29
O
Connecting Headphones 35
Off Timer On/Off 68
Contrast 41
Off Timer Setting 69
Copyright 2
Correct Disposal of This Product 86
Correct posture to use the product 13
Customized Key 67
P
Parts 20
PBP 49
PC/AV Mode 63
D
PowerSaver 78
Display Time 65
Q
E
Q & A 75
ECO 53
R
G
Red 44
Gamma 48
Requirements Before Contacting Samsung
Customer Service Center 72
General 77
Green 45
Reset 70
Response Time 43
I
Image Size 51
Index
89
Index
S
Safety Precautions 6
Sharpness 42
Standard Signal Mode Table 79
T
Terminology 87
U
Utilizing the Product as a USB HUB 36
Index
90

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement