DELL Professional P2314H User's Guide

Add to My manuals
37 Pages

advertisement

DELL Professional P2314H User's Guide | Manualzz

Model No.: P2314H

Regulatory model: P2314Ht

User’s Guide

Dell P2314H

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2013 Dell Inc. All rights reserved.

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and Inspiron™ are trademarks of Dell Inc.; Intel ® , Centrino ® , Core ™ , and Atom ™ are either trademarks or registered trademarks of Intel Corporation in the U.S. and other countries; Microsoft ® , Windows ® , and Windows start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Bluetooth ® is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license;

Blu-ray Disc ™ is a trademark owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players; Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

2013 – 07 Rev. A01

Contents

About Your Monitor..........................................................................6

Package Contents...........................................................................................6

Product Features.............................................................................................8

Identifying Parts and Controls.....................................................................9

Front View.............................................................................................................9

Back View.............................................................................................................10

Side View..............................................................................................................11

Bottom View........................................................................................................11

Monitor Specifications..................................................................................12

Flat-Panel Specifications..................................................................................12

Resolution Specifications.................................................................................13

Video Supported Modes....................................................................................13

Preset Display Modes.........................................................................................13

Electrical Specifications....................................................................................13

Physical Characteristics....................................................................................14

Environmental Characteristics........................................................................14

Power Management Modes.............................................................................15

Pin Assignments.................................................................................................16

Plug and Play Capability..............................................................................18

Universal Serial Bus (USB) Interface..........................................................19

LCD Monitor Quality and Pixel Policy.......................................................21

Maintenance Guidelines..............................................................................21

Cleaning Your Monitor......................................................................................21

Setting Up the Monitor...................................................................22

Attaching the Stand

...................................................................................

22

Connecting Your Monitor

.......................................................................

22

Organizing the Cables

..............................................................................

24

Attaching the Cable Cover

......................................................................

25

Removing the Stand

..................................................................................

25

Wall Mounting(Optional)

.........................................................................

26

Operating the Monitor...................................................................27

Power on the monitor..................................................................................27

Using the Front Panel Controls..................................................................27

Using the On-Screen Display (OSD) Menu...............................................29

OSD Warning Messages....................................................................................42

Setting the Maximum Resolution..............................................................43

Using the Tilt, Swivel, and Vertical Extension..........................................44

Tilt,Swivel.............................................................................................................44

Vertical Extension...............................................................................................45

Rotating the Monitor.....................................................................................46

Contents  3

Adjusting the Rotation Display Settings of Your System .......................47

Troubleshooting..............................................................................48

Self-Test...........................................................................................................48

Built-in Diagnostics.......................................................................................49

Common Problems.......................................................................................50

Product Specific Problems..........................................................................55

Universal Serial Bus(USB) Specific Problems...........................................56

Appendix...........................................................................................57

WARNING: Safety Instructions....................................................................57

FCC Notices (U.S. Only) and Other Regulatory Information.................57

Contacting Dell..............................................................................................57

Setting Up Your Monitor................................................................58

Setting the display resolution to 1920 x 1080 (maximum)...................58

If you have a Dell desktop or a Dell portable computer with internet access..............................................................................................................59

If you have non Dell desktop, portable computer, or graphic card....60

Procedure on setting up dual monitors in Windows Vista, Windows 7 and

Windows 8 ...........................................................................................61

4  Contents Contents  5

About Your Monitor

Package Contents

Your monitor ships with the components shown below. Ensure that you have

received all the components and contact Dell

if something is missing.

NOTE: Some items may be optional and may not ship with your monitor.

Some features or media may not be available in certain countries.

NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.

• Monitor

• Stand

• Cable Cover

6  About Your Monitor

• Power Cable (varies by countries)

• VGA Cable

• DisplayPort Cable

• USB Upstream Cable

(enables the USB ports on the monitor)

• Drivers and

Documentation Media

• Quick Setup Guide

• Product and Safety

Information Guide

About Your Monitor  7

Product Features

The Dell P2314H flat panel display has an active matrix, thin-film transistor

(TFT), liquid crystal display (LCD), and LED backlight. The monitor features include:

• 58.42 cm (23-inch) active area display (Measured diagonally) 1920 x 1080 resolution, plus full-screen support for lower resolutions.

• Tilt, swivel, vertical extension and rotate adjustment capabilities.

• Removable pedestal and Video Electronics Standards Association

(VESA™) 100 mm mounting holes for flexible mounting solutions.

• Plug and play capability if supported by your system.

• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

• Software and documentation media includes an information file

(INF), Image color Matching File (ICM), Dell Display Manager software application and product documentation. Dell Display Manager included

(comes in the CD attached with the monitor).

• Security lock slot.

• Stand lock.

• Asset Management Capability.

• Energy Star Compliant.

• EPEAT Gold Compliant.

• RoHS compliant.

• BFR/PVC- reduced.

• Arsenic-Free glass and Mercury Free for Panel only.

• Energy Gauge shows the energy level being consumed by the monitor in real time.

• TCO Certified Displays.

Identifying Parts and Controls

Front View

Front View Front panel controls

Label Description

1. Function buttons (For more information, see Operating the Monitor)

2. Power On/Off button (with LED indicator)

8  About Your Monitor About Your Monitor  9

Back View Side View

Back view Back view with monitor stand

Label Description

1

2

3

4

5

6

7

VESA mounting holes (100 mm x 100 mm - behind attached VESA Cover)

Regulatory label

Stand release button

Security lock slot

Use

Wall mount monitor using VESAcompatible wall mount kit (100 mm x

100 mm).

Lists the regulatory approvals.

Release stand from monitor.

Use a security lock to secure the moni­ tor. (security lock not included).

Barcode serial number label

Dell Soundbar mounting slots

Refer to this label if you need to contact

Dell for technical support.

Attaches the optional Dell Soundbar.

Cable management slot Use to organize cables by placing them through the slot.

10  About Your Monitor

Bottom View

Bottom view

Label Description Use

1. AC power connector To connect the monitor power cable.

2. DP connector Connect your computer DP cable.

3 DVI connector

4 VGA connector

To connect your computer to the monitor using a DVI cable.

To connect your computer to the monitor using a VGA cable.

5 USB upstream port Connect the USB cable that came with your monitor to the monitor and the computer.

Once this cable is connected, you can use the

USB connectors on the monitor.

About Your Monitor  11

6

7

USB downstream port

Stand lock

Connect your USB device. You can only use this connector after you have connected the

USB cable to the computer and USB upstream connector on the monitor.

To disable the stand release button and lock the stand assembly using an M3 X 6 mm screw

(screw not included).

Monitor Specifications

Flat Panel Specifications

Screen type

Panel type

Viewable image dimensions

Diagonal

Horizontal Active Area

Vertical Active Area

Area

Pixel pitch

Viewing angle

Luminance output

Contrast ratio

Dynamic contrast ratio

Faceplate coating

Backlight

Response Time

Color depth

Color gamut (Typical)

Active matrix - TFT LCD

In plane switching

58.42 cm (23 inches)

509.18 mm (20.05 inches)

286.42 mm (11.28 inches)

145839.34 mm 2 (226.05 inch 2 )

0.2652 (H) mm x 0.2652 (V) mm

178° (vertical) typical, 178° (horizontal) typical

250 cd/m² (typical)

1000:1 (typical)

2,000,000:1

AG type,Haze 25%, hard-coating 3H

LED edgelight system

8ms Typ. g-to-g with OD

16.7 million colors

83%* (CIE1976)

*[P2314H] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.

Resolution Specifications

Horizontal scan range

Vertical scan range

Maximum resolution

30 kHz to 83 kHz (automatic)

56 Hz to 76 Hz (automatic)

1920 x 1080 at 60 Hz

12  About Your Monitor

Video Supported Modes

Video display capabilities

(DVI playback)

480p, 576p, 720p, 1080p and 1080i

Preset Display Modes

Display Mode Horizontal

Frequency

720 x 400

640 x 480

(kHz)

31.5

31.5

640 x 480

800 x 600

37.5

37.9

800 x 600 46.9

1024 x 768 48.4

1024 x 768 60.0

1152 x 864 67.5

1280 x 1024 64.0

1280 x 1024 80.0

1600 x 900 60.0

1920 x 1080 67.5

Vertical

Frequency

(Hz)

70.0

60.0

75.0

60.0

75.0

60.0

75.0

75.0

60.0

75.0

60.0

60.0

Pixel Clock

(MHz)

28.3

25.2

Sync Polarity

(Horizontal/

Vertical)

-/+

-/-

31.5

40.0

49.5

65.0

78.8

108.0

108.0

135.0

108.0

148.5

-/­

+/+

+/+

-/­

+/+

+/+

+/+

+/+

+/­

+/+

Electrical Specifications

Video input signals

Synchronization input signals

AC input voltage/ frequency/current

Inrush current

• Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance

Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance

• DP 1.2 signal input support

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG

(Composite SYNC on green)

100 VAC to 240 VAC/

50 Hz or 60 Hz + 3 Hz/1.5 A (Max.)

120 V:30 A (Max.)

240 V:60 A (Max.)

About Your Monitor  13

Physical Characteristics

Connector typ e

Signal cable type

Dimensions (with stand)

Height(extended)

Height(compressed)

Width

Depth

Dimensions (without stand)

Height

Width

Depth

Stand dimensions

Height (extended)

Height(compressed)

Width

Depth

Weight

Weight with packaging

Weight with stand assembly and cables

Weight without stand assembly

(For wall mount or VESA mount considerations - no cables)

Weight of stand assembly

3.34 kg (7.35 lb)

1.87 kg (4.11 lb)

15-pin D-subminiature, blue connector; DVI-D, white connector; DP, black connector

Digital: Detachable, DVI-D, Solid pins.

Analog: Detachable, D-Sub, 15 pins

493.0 mm (19.41 inches)

363.0 mm (14.29 inches)

545.8 mm (21.49 inches)

180.0 mm (7.09 inches)

323.0 mm (12.72 inches)

545.8 mm (21.49 inches)

46.5 mm (1.83 inches)

399.7 mm (15.74 inches)

354.2 mm (13.94 inches)

225.0 mm (8.86 inches)

180.0 mm (7.09 inches)

7.39 kg (16.26 lb)

5.67 kg (12.47 lb)

Environmental Characteristics

Temperature

Operating

Non-operating

0 °C to 40 °C

Storage: -20 °C to 60 °C (-4 °F to 140 °F)

Shipping: -20 °C to 60 °C (-4 °F to 140 °F)

14  About Your Monitor

Humidity

Operating

Non-operating

Altitude

Operating

Non-operating

Thermal dissipation

10% to 80% (non-condensing)

Storage: 5% to 90% (non-condensing)

Shipping: 5% to 90% (non-condensing)

5,000 m (16,400 ft) max

12,191 m (40,000 ft) max

68.24 BTU/hour (maximum)

129.66 BTU/hour (typical)

Power Management Modes

If you have VESA’s DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

VESA

Modes

Horizontal Sync

Vertical

Sync

Video Power

Indicator

Normal operation

Active-off mode

Active

Inactive

Switch off -

Active

Inactive Blanked Glowing

-

Active

-

White

White

Off

Power Consumption

20 W (typical)/38 W

(maximum)

Less than 0.3 W

Less than 0.3 W

The OSD function will only in the normal operation mode. When any button is pressed in Active-off mode, the following message will be displayed:

About Your Monitor  15

Activate the computer and the monitor to gain access to the OSD.

NOTE: This monitor is ENERGY STAR ® -compliant.

NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

VGA Connector

8

9

10

11

12

13

14

15

DVI Connector

GND-B

Computer 5V/3.3V

GND-sync

GND

DDC data

H-sync

V-sync

DDC clock

4

5

6

7

Pin Number 15-pin Side of the Connected Signal Cable

1 Video-Red

2

3

Video-Green

Video-Blue

GND

Self-test

GND-R

GND-G

16  About Your Monitor

10

11

12

13

6

7

8

9

14

15

16

Pin Number 24-pin Side of the Connected Signal Cable

1 TMDS RX2­

2

3

4

5

TMDS RX2+

TMDS Ground

Floating

Floating

DDC Clock

DDC Data

Floating

TMDS RX1­

TMDS RX1+

TMDS Ground

Floating

Floating

+5 V/+3.3 V power

Self test

Hot Plug Detect

About Your Monitor  17

17

18

19

20

21

22

23

24

TMDS RX0­

TMDS RX0+

TMDS Ground

Floating

Floating

TMDS Ground

TMDS Clock+

TMDS Clock-

Displayport Connector

6

7

8

9

10

11

12

13

14

15

16

3

4

5

Pin Number 20-pin Side of the ConnectedSignal Cable

1 ML0(p)

2 GND

ML0(n)

ML1(p)

GND

ML1(n)

ML2(p)

GND

ML2(n)

ML3(p)

GND

ML3(n)

GND

GND

AUX(p)

GND

18  About Your Monitor

17

18

19

20

AUX(n)

HPD

Re-PWR

PWR

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended

Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings,

see Operating the Monitor .

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the monitor.

NOTE: This monitor supports High-Speed Certified USB 2.0 interface.

Transfer Speed DataRate Power Consumption

High speed 480 Mbps 2.5 W (Max, each port)

Full speed

Low speed

12 Mbps

1.5 Mbps

USB Upstream Connector

2.5 W (Max, each port)

2.5 W (Max, each port)

Pin Number

1

2

3

4

4-pin Side of the Connector

DMU

VCC

DPU

GND

About Your Monitor  19

USB Downstream Connector

Pin Number

1

2

3

4

4-pin Side of the Connector

VCC

DMD

DPD

GND

USB Ports

• 1 upstream - back

• 4 downstream - back

NOTE: USB 2.0 functionality requires a USB 2.0-capable computer.

NOTE: The monitor’s USB interface works only when the monitor is on or in the power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality.

LCD Monitor Quality and Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on

Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/ support/monitors .

20  About Your Monitor

Maintenance Guidelines

Cleaning Your Monitor

WARNING: Read and follow the

Safety Instructions

before cleaning the monitor.

WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

• To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

• Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor. 

• If you notice white powder when you unpack your monitor, wipe it off with a cloth.

• Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than light-colored monitors.

• To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.

About Your Monitor  21

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached from monitor when it is shipped from the factory.

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.

Connecting the White DVI Cable

Connecting the Blue VGA Cable

To attach the monitor stand:

1. Remove the cover and place the monitor on it.

2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.

3. Press the stand till it snaps into its place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section,

follow the Safety Instructions .

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

2. Connect either the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back of your computer. Do not connect both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems.

22  Setting Up the Monitor

Connecting the black DisplayPort Cable

CAUTION: The graphics are used for the purpose of illustration only.

Appearance of the computer may vary.

Setting Up the Monitor  23

Connecting the USB Cable

After you have completed connecting the DVI/VGA/DP cable, follow the procedures below to connect the USB cable to the computer and complete your monitor setup:

1. Connect the upstream USB port (cable supplied) to an appropriate USB

port on your computer. (See bottom view

for details.)

2. Connect the USB peripherals to the downstream USB ports on the monitor.

3. Plug the power cables for your computer and monitor into a nearby outlet.

4. Turn on the monitor and the computer.If your monitor displays an image, installation is complete. If it does not display an image, see

Solving Problems .

5. Use the cable slot on the monitor stand to organize the cables.

Attaching the Cable Cover

Removing the Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.

Organizing the Cables

After attaching all necessary cables to your monitor and computer, (See

Connecting Your Monitor

for cable attachment,) use the cable management slot to organize all cables as shown above.

24  Setting Up the Monitor

To remove the stand:

1. Place the monitor a flat surface.

2. Press and hold the Stand release button.

3. Lift the stand up and away from the monitor.

Setting Up the Monitor  25

Wall Mounting (Optional)

Operating the Monitor

Power On the Monitor

Press the button to turn on the monitor

(Screw dimension: M4 x 10 mm).

Refer to the instructions that come with the VESA-compatible wall mounting kit.

1. Place the monitor panel on a soft cloth or cushion on stable flat table.

2. Remove the stand.

3. Use a screwdriver to remove the four screws securing the plastic cover.

4. Attach the mounting bracket from the wall mounting kit to the LCD.

5. Mount the LCD on the wall by following the instructions that came with the wall mounting kit.

NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load bearing capacity of 3.34 kg.

Using the Front Panel Controls

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.

26  Operating the Monitor

The following table describes the front panel buttons:

Operating the Monitor  27

Front panel Button Description

1

Shortcut key/ Preset

Modes

Use this button to choose from a list of preset color modes.

2

Shortcut key /

Brightness/Contrast

Use this button to directly access the “Brightness/

Contrast“ menu.

3

Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See

Accessing the Menu System

.

Menu

4

Exit

Use this button to go back to the main menu or exit the OSD main menu.

5

Power

(with power light indicator)

Use the Power button to turn the monitor on and off.

The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

28  Operating the Monitor

Front Panel Button

Use the buttons on the front of the monitor to adjust the image settings.

1

Front panel Button Description

Use the Up key to adjust (increase ranges) items in the

OSD menu.

Up

2

Use the Down key to adjust (decrease ranges) items in the OSD menu.

Down

3 Use the OK key to confirm your selection.

OK

4 Use the Back key to go back to the previous menu.

Back

Operating the Monitor  29

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1. Press the MENU button to launch the OSD menu and display the main menu.

Icon

Menu and

Submenus

Energy Use

Brightness/

Contrast

Description

This meter shows the energy level being consumed by the monitor in real time.

Use this menu to activate Brightness/Contrast adjustment.

NOTE: Auto Adjust is only available when you use the analog (VGA) connector.

2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.

NOTE: Auto Adjust is only available when you use the analog (VGA) connector.

3. Press the or button once to activate the highlighted option.

4. Press the and buttons to select the desired parameter.

5. Press to enter the slide bar and then use the  or button, according to the indicators on the menu, to make your changes.

6. Press the button once to return to the main menu to select another option or press the button two or three times to exit from the OSD menu. 

30  Operating the Monitor

Brightness

Contrast

Brightness adjusts the luminance of the backlight.

Press the button to increase brightness and

Press the max 100). button to decrease brightness (min 0 ~

NOTE: Brightness control will be greyed out during

“Screen dim” in PowerNap option when screen saver is activated.

Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.

Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max

100).

The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

Operating the Monitor  31

Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto

Adjustment, you can further tune your monitor by using the Pixel Clock and Phase controls under

Displays Settings.

Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor.

The following dialog appears on a black screen as the monitor automatically adjusts to the current input:

NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector.

Auto Select

VGA

DVI-D

DisplayPort

Select Auto Select to scan for available input signals.

Select VGA input when you are using the analog

(VGA) connector. Press to select the VGA input source.

Select DVI-D input when you are using the Digital

(DVI) connector. Press to select the DVI input source.

Select DisplayPort input when you are using the

DisplayPort(DP) connector. Press to select the

DisplayPort input source.

32  Operating the Monitor Operating the Monitor  33

Color Settings Use the Color Settings menu to adjust the monitor’s color settings .

Input Color

Format

Allows you to set the video input mode to.

• RGB: Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter.

• YPbPr: Select this option if your DVD player supports only YPbPr output.

Preset Mode Allows you to choose from a list of preset color modes.

• Standard: Loads the monitor’s default color settings. This is the default preset mode.

• Multimedia: Loads color settings ideal for multimedia applications.

• Movie: Loads color settings ideal for movies.

• Game: Loads color settings ideal for most gaming applications.

• Text: Loads color settings ideal for office

• Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint.

• Cool: Decreases the color temperature. The screen appears cooler with a blue tint.

• Custom Color: Allows you to manually adjust the color settings. Press the and  buttons to adjust the Red, Green, and Blue values and create your own preset color mode.

34  Operating the Monitor Operating the Monitor  35

36 

Image

Enhance

Hue

Saturation

Reset Color

Settings

Which can automatically sharpen images, enhance hues and boost color contrast.

To enhance image clarity.

NOTE: Image Enhance is only available for Standard,

Multimedia, Movie and Game mode.

This feature can shift color of video image to green or purple. This is used to adjust the desired flesh tone color. Use or to adjust the hue from ‘0’ to ‘100’ .

Press to increase the green shade of the video image.

Press to increase the purple shade of the video image.

NOTE: Hue adjustment is available only for Movie and Game mode.

This feature can adjust the color saturation of the video image. Use or to adjust the saturation from ‘0’ to ‘100’.

Press to increase the monochrome appearance of the video image.

Press to increase the colorful appearance of the video image.

NOTE: Saturation adjustment is available only for video input.

Resets your monitor’s color settings to the factory defaults.

Operating the Monitor

DISPLAY

SETTINGS

Use the Display Settings to adjust image.

Wide Mode

Horizontal

Position

Vertical

Position

Sharpness

Pixel Clock

Phase

Dynamic

Contrast

Adjust the image ratio to Wide 16:9, 4:3, 5:4.

Use the and buttons to adjust image left and right. Minimum is ‘0’ (-). Maximum is ‘100’ (+).

NOTE: When using a DVI source, the Horizontal

Position setting is not available.

Use the and buttons to adjust image up and down. Minimum is ‘0’ (-). Maximum is ‘100’ (+).

NOTE: When using a DVI source, the Vertical

Position setting is not available.

This feature can make the image look sharper or softer. Use or to adjust the sharpness from

‘0’ to ‘100’.

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Use the and buttons to adjust for best image quality.

If satisfactory results are not obtained using the

Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.

NOTE: Pixel Clock and Phase Adjustments are only available for “VGA” input.

Dynamic Contrast adjusts the contrast ratio to

2,000,000 : 1.

Push the button to select the Dynamic Contrast

“On” or “Off”.

Operating the Monitor  37

Reset Display

Settings

ENERGY

SETTINGS

Select this option to restore default display settings.

Energy Smart To turn on or off dynamic dimming.

Energy Smart turned “on” will activate the dynamic dimming. With Energy Smart turned on, the monitor will consume overall less power compared to when

Energy Smart is turned “off”.

NOTE: Under Energy Smart mode, the energy usage bar will decrease when transitioning from bright scenes to darker scenes. The energy usage bar will increase when transitioning from dark scenes to bright scenes.

USB

System

Monitor status ON

Monitor with upstream connected

ON

(Disbled)

Monitor without upstream connected

ON

Standby

ON

(Disbled)

OFF/ON*

(depends on

OSD selections)

OFF

OFF

(Disbled)

OFF

Power Button

LED

Reset Energy

Settings

Allows you to set the power LED indicator on or off to save energy.

Select this option to restore default Energy Settings.

38  Operating the Monitor

MENU

SETTINGS

Language Language option to set the OSD display to one of eight languages (English, Espanol, Francais,

Deutsch, Brazilian Portuguese, Russian, Simplified

Chinese or Japanese).

Transparency This function is used to change the OSD background from opaque to transparent.

Timer OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Lock

Reset Menu

Settings

Use the and buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.

Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.

NOTE:

Lock function – Either soft lock (through OSD menu) or hard lock (Press and hold the button above power button for 10 sec)

Unlock function– Only hard unlock (Press and hold the button above power button for 10 sec)

Select this option to restore default Menu settings.

Operating the Monitor  39

40 

OTHER

SETTINGS

Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.

DDC/CI DDC/CI (Display Data Channel/Command

Interface) allows your monitor parameters

(brightness, color balance etc) to be adjustable via software on your computer. You can disable this feature by selecting “Disable”.

Enable this feature for best user experience and optimum performance of your monitor.

LCD

Conditioning

Helps reduce minor cases of image retention.

Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting “Enable”.

Reset Other

Settings

Factory

Reset

Personalize

Select this option to restore default other settings, such as DDC/CI.

Reset all OSD settings to the factory preset values.

User can select from “Preset Modes”, “Brightness/

Contrast”, “Auto Adjust”, “Input Source”, “Aspect

Ratio” and set as shortcut key.

Operating the Monitor

Reset

Personalization

Allows you to restore shortcut key to the default setting.

Operating the Monitor  41

OSD Warning Messages

When the monitor does not support a particular resolution mode you will see the following message:

This means that the monitor cannot synchronize with the signal that it is

receiving from the computer. See Monitor Specifications for the Horizontal

and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.

You will see the following message before the DDC/CI function is disabled.

When monitor enters Power Save mode, the following message appears:

Activate the computer and wake up the monitor to gain access to the OSD

42  Operating the Monitor

If you press any button other than the power button one of the following messages will appear depending on the selected input:

If either VGA or DVI-D or DP input is selected and both VGA and DVI-D and

DP cables are not connected, a floating dialog box as shown below appears. or or

See Solving Problems for more information.

Setting the Maximum Resolution

In Windows Vista ® , Windows ® 7 or Windows ® 8:

1. For Windows ® 8 only, select the Desktop tile to switch to classic desktop.

2. Right-click on the desktop and click Screen resolution.

3. Click the Dropdown list of the Screen resolution and select 1920 x 1080.

4. Click OK.

If you do not see 1920 x 1080 as an option, you may need to update your

Operating the Monitor  43

graphics driver. Depending on your computer, complete one of the following procedures:

If you have a Dell desktop or portable computer:

• Go to www.dell.com/support , enter your service tag, and download the latest driver for your graphics card.

If you are using a non-Dell computer (portable or desktop):

• Go to the support site for your computer and download the latest graphic drivers.

• Go to your graphics card website and download the latest graphic drivers.

Using the Tilt, Swivel, and Vertical Extension

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.

Tilt, Swivel

With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle.

Vertical Extension

NOTE: The stand extends vertically up to 130 mm. The figure below illustrates how to extend the stand vertically.

NOTE: The stand is detached when the monitor is shipped from the factory.

44  Operating the Monitor Operating the Monitor  45

Rotating the Monitor

Before you rotate the monitor, your monitor should be fully vertically extended (

Vertical Extension ) and fully tilted ( Tilt

) up to avoid hitting the bottom edge of the monitor.

NOTE: To use the Display Rotation function (Landscape versus

Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. Todownload the graphics driver, go to www.dell. com/support and see the Download section for Video

Drivers for latest driver updates.

NOTE: When in the Portrait View Mode, you may experience performance degradation in graphic-intensive applications

(3D Gaming and etc.).

Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System.

NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the

’contents’ on your display.

To adjust the Rotation Display Settings:

1. Right-click on the desktop and click Properties.

2. Select the Settings tab and click Advanced.

3. If you have an ATI graphics card, select the Rotation tab and set the

preferred rotation.

If you have an nVidia graphics card, click the nVidia tab, in the left-hand

column select NVRotate, and then select the preferred rotation.

If you have an Intel ® graphics card, select the Intel graphics tab, click

Graphic Properties, select the Rotation tab, and then set the preferred

rotation.

NOTE: If you do not see the rotation option or it is not working correctly, go to www.dell.com/support and download the latest driver for your graphics card.

46  Operating the Monitor Operating the Monitor  47

Troubleshooting

CAUTION: Before you begin any of the procedures in this section,

follow the Safety Instructions

Self-Test

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue connector) cables from the back of computer.

3. Turn on the monitor.

The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains blue. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.  or or

4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged.

5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.

48  Operating the Monitor

Built-in Diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.

To run the built-in diagnostics:

1. Ensure that the screen is clean (no dust particles on the surface of the screen).

2. Unplug the video cable(s) from the back of the computer or monitor.

The monitor then goes into the self-test mode.

3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears.

4. Carefully inspect the screen for abnormalities.

5. Press the Button 4 on the front panel again. The color of the screen changes to red.

6. Inspect the display for any abnormalities.

7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white screens.

The test is complete when the white screen appears. To exit, press the Button

4 again. 

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.

Operating the Monitor  49

Common Problems

The following table contains general information about common monitor problems you might encounter and the possible solutions.

Common

Symptoms

No Video/Power

LED off

What You

Experience

No picture

Possible Solutions

• Ensure that the video cable connecting the monitor and the computer is properly connected and secure.

No Video/Power

LED on

No picture or no brightness

• Verify that the power outlet is functioning properly using any other electrical equipment.

• Ensure that the power button is depressed fully.

• Ensure that the correct input source is selected via the

Input

Source Select

button.

• Check the “

Power Button LED

” option under Energy Settings in

OSD Menu

• Increase brightness & contrast controls via OSD.

• Perform monitor self-test feature check.

• Check for bent or broken pins in the video cable connector.

• Run the built-in diagnostics.

• Ensure that the correct input source is selected via the

Input

Source Select

button.

Poor Focus

Shaky/Jittery

Video

Missing Pixels

Picture is fuzzy, blurry, or ghosting

Wavy picture or fine movement

LCD screen has spots

Perform Auto Adjust via OSD.

Adjust the Phase and Pixel Clock controls via OSD.

Eliminate video extension cables.

Change the video resolution to the correct aspect ratio (16:9).

Perform Auto Adjust via OSD.

• Reset the monitor to Factory

Settings.

Adjust the Phase and Pixel Clock controls via OSD.

Check environmental factors.

Relocate the monitor and test in another room.

Cycle power on-off.

Pixel that is permanently off is a natural defect that can occur in

LCD technology.

Reset the monitor to Factory

Settings.

For more information on Dell

Monitor Quality and Pixel Policy, see Dell Support site at: www.dell. com/support/monitors .

50  Operating the Monitor Operating the Monitor  51

Stuck-on Pixels LCD screen has bright spots

Brightness

Problems

Geometric

Distortion

Picture too dim or too bright

Screen not centered correctly

• Cycle power on-off.

• Pixel that is permanently off is a natural defect that can occur in

LCD technology.

• For more information on Dell

Monitor Quality and Pixel Policy, see Dell Support site at: www.dell. com/support/monitors .

• Reset the monitor to Factory

Settings.

• Auto Adjust via OSD.

• Adjust brightness & contrast controls via OSD.

• Reset the monitor to Factory

Settings.

• Auto Adjust via OSD.

• Adjust Horizontal Position &

Vertical Position controls via OSD.

NOTE: When using DVI-D input, the positioning adjustments are not available.

52  Operating the Monitor

Horizontal/

Vertical Lines

Synchronization

Problems

Safety Related

Issues

Screen has one or more lines

• Reset the monitor to Factory

Settings.

• Perform Auto Adjust via OSD.

• Adjust Phase and Pixel Clock controls via OSD.

• Perform monitor self-test feature check and determine if these lines are also in self-test mode.

• Check for bent or broken pins in the video cable connector.

Screen is scrambled or appears torn

Visible signs of smoke or sparks

• Run the built-in diagnostics.

NOTE: When using DVI-D input, the

Pixel Clock and Phase adjustments are not available.

• Reset the monitor to Factory

Settings.

• Perform Auto Adjust via OSD.

• Adjust Phase and Pixel Clock controls via OSD.

• Perform monitor self-test feature check to determine if the scrambled screen appears in selftest mode.

• Check for bent or broken pins in the video cable connector.

• Restart the computer in the safe mode.

• Do not perform any troubleshooting steps.

• Contact Dell immediately.

Operating the Monitor  53

Intermittent

Problems

Missing Color

Wrong Color

Monitor malfunctions on & off

• Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.

• Reset the monitor to Factory

Settings.

Picture missing color

Picture color not good

Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.

Perform monitor self-test feature check.

Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.

Check for bent or broken pins in the video cable connector.

Change the Color Setting Mode in the Color Settings OSD to

Graphics or Video depending on the application.

• Try different Color Preset Settings in Color Settings OSD. Adjust

R/G/B value in Color Settings

OSD if the Color Management is turned off.

• Change the Input Color Format to PC RGB or YPbPr in the

Advance Setting OSD.

• Run the built-in diagnostics.

54  Operating the Monitor

Image retention Faint shadow • Use the Power Management from a static from the image left on the static image feature to turn off the monitor at all times when not in use (for monitor for a long displayed period of time appears on the

more information, see

Management Modes

).

Power

screen

• Alternatively, use a dynamically changing screensaver.

Product Specific Problems

Specific

Symptoms

What You

Experience

Screen Image is image is too centered on small screen, but does not fill entire viewing area

Cannot adjust the monitor with the buttons on the front panel

No Input

Signal when user controls are pressed

OSD does not appear on the screen

No picture, the LED light is white.

Possible Solutions

• Check the Scaling Ratio setting in

Image Setting OSD

• Reset the monitor to Factory Settings.

• Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.

• Check the signal source. Ensure the

Computer is not in the power saving mode by moving the mouse or pressing any key on the keyboard.

• Check to make sure Video Source to

VGA or DVI-D is powered and playing video media.

• Check whether the signal cable is plugged in properly. Re-plug the signal cable if necessary.

• Reset the computer or video player.

Operating the Monitor  55

The picture The picture does not fill cannot fill the entire screen. the height or width of the screen

• Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.

• Run the built-in diagnostics.

NOTE: When choosing DVI-D mode, the Auto Adjust function will not be available.

Universal Serial Bus (USB) Specific Problems

Specific

Symptoms

What You

Experience

USB USB interface is peripherals not working are not working

Possible Solutions

• Check that your monitor is turned ON.

• Reconnect the upstream cable to your computer.

• Reconnect the USB peripherals

(downstream connector).

• Switch off and then turn on the monitor again.

• Reboot the computer.

• Some USB devices like external portable HDD require higher electric current; connect the device directly to thecomputer system.

High Speed High Speed • Check that your computer is USB

USB 2.0 USB 2.0 2.0-capable. interface is slow. peripherals working slowly or not working at all

• Some computers have both USB 2.0 and USB 1.1 ports. Ensure that the correct USB port is used.

• Reconnect the upstream cable to your computer.

• Reconnect the USB peripherals

(downstream connector).

• Reboot the computer.

56  Operating the Monitor

Appendix

WARNING: Safety Instructions

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

For information on safety instructions, see the Product Information Guide.

FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at: http://www.dell.com/regulatory_compliance .

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.

To get online monitor support content:

1. Visit www.

dell.com/support/monitors.

To contact Dell for sales, technical support, or customer service issues:

1. Visit www.dell.com/support.

2. Verify your country or region in the Choose A Country/Region dropdown menu at the bottom of the page. 

3. Click Contact Us on the left side of the page.

4. Select the appropriate service or support link based on your need.

5. Choose the method of contacting Dell that is convenient for you.

Appendix  57

Setting Up Your Monitor

Setting the display resolution to 1920 x 1080 (maximum)

For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps:

In Windows Vista ® , Windows ® 7, Windows ® 8:

1. For Windows ® 8 only, select the Desktop tile to switch to classic desktop.

2. Right-click on the desktop and click Screen Resolution.

3. Click the Dropdown list of the Screen Resolution and select 1920 x 1080.

4. Click OK.

If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the provided directions:

1: If you have a Dell™ desktop or a Dell™ portable computer with internet access.

2: If you have non Dell™ desktop, portable computer, or graphic card.

If you have a Dell desktop or a Dell portable computer with internet access

1. Go to www.dell.com/support , enter your service tag, and download the latest driver for your graphics card.

2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1080 again.

NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions. 

58  Setting Up Your Monitor Setting Up Your Monitor  59

If you have non Dell desktop, portable computer, or graphic card

In Windows Vista ® , Windows ® 7, Windows ® 8:

1. For Windows ® 8 only, select the Desktop tile to switch to classic desktop.

2. Right-click on the desktop and click Personalization.

3. Click Change Display Settings.

4. Click Advanced Settings.

5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

6. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).

7. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1080 again.

NOTE: If you are unable to set the resolution to 1920 x 1080, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1920 x 1080. 

Procedures for setting up dual monitors in Windows Vista

®

, Windows

®

7 or

Windows

®

8

Content

(a) For Windows Vista ®

(b) For Windows ® 7

(c) For Windows ® 8

(d) Setting Display Styles For Multiple Monitor

(a) For Windows Vista

®

Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP etc.) and follow any of the below setup method.

Method 1: Using keyboard shortcut “Win+P”

1.

Press the Windows logo key + P on your keyboard.

2.

While holding down the Windows logo key tween the display selections.

, press P to toggle be­

Method 2: Using the “Personalize” menu

1.

Right-click on the desktop and click Personalize .

2.

Click Display Settings .

60  Setting Up Your Monitor Setting Up Your Monitor  61

3.

Click Identify Monitors .

You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.

(b) For Windows

®

7

Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP etc.) and follow any of the below setup method.

Method 1: Using keyboard shortcut “Win+P”

1.

Press the Windows logo key + P on your keyboard.

2.

While holding down the Windows logo key tween the display selections.

, press P to toggle be­

Method 2: Using the “Screen Resolution” menu

1. Right-click on the desktop and click Screen resolution.

2. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect.

You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.

62  Setting Up Your Monitor Setting Up Your Monitor  63

Method 2: Using the “Screen Resolution” menu

1. From the Start screen, select Desktop tile to switch to the Classic

Windows desktop.

(c) For Windows

®

8

Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP etc.) and follow any of the below setup method.

Method 1: Using keyboard shortcut “Win+P”

1. Press the Windows logo key + P on your keyboard.

2. While holding down the Windows logo key , press P to toggle be­ tween the display selections.

2. Right-click on the desktop and click Screen resolution .

3. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect .

You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.

64  Setting Up Your Monitor Setting Up Your Monitor  65

66  Setting Up Your Monitor

(d) Setting Display Styles For Multiple Monitor

After the external monitor(s) have been set up, users can select the desired display style from Multiple displays menu: Duplicate, Extend,

Show Desktop On.

 Duplicate these displays: Duplicate the same screen on two monitors with the same resolution, chosen based on the monitor with a lower resolution.

(i) For Windows Vista ®

[DUPLICATE NOT AVAILABLE]

(ii) For Windows ® 7

Setting Up Your Monitor  67

(iii) For Windows ® 8 (i) For Windows Vista ®

 Extend these displays: This option is recommended when an exter­ nal monitor is connected to a laptop, and each monitor can display different screen independently to improve user convenience. The rel­ ative position of the screens can be set up here, for example monitor

1 may be set up to be to the left of monitor 2 or vice versa. This de­ pends on the physical position of the LCD monitor in relation to the laptop. The horizontal line displayed on both monitors can be based on the laptop or external monitor. These are all adjustable options, and all a user need do is drag the monitor of the main screen to the extended monitor.

(ii) For Windows ® 7

68  Setting Up Your Monitor Setting Up Your Monitor  69

(iii) For Windows ® 8

 Show desktop only on…: Display the status of a particular monitor.

This option is typically chosen when the laptop is used as a PC so the user can enjoy a large external monitor. Most current laptops support mainstream resolutions. As shown in the figure above, the resolution of the laptop monitor is only 1366 x 768, but after connecting a 23” external LCD monitor, users can immediately improve their visual enjoyment to 1920 x 1080.

70  Setting Up Your Monitor

(i) For Windows Vista ®

Setting Up Your Monitor  71

(ii) For Windows ® 7

Change the appearance of your displays

[ l d en t ofy ]

Disp l ay. [L"MObil e P C Ots p l a y

1024 768 Resolution:

Orien t a t ion: 'a l'\ dscape

Mu k rpl e diSplays:

I ow daltt o p on ly o n 1

Duplicat e t hese d i spl a ys

You must sel e d Ext end thes e d is Ia n al chan g es .

Connect t o a proJector (or press t he

II key and t ap P)

Make tm and other rtems larg8 or smaiiH

What drsplay settongs should I choose?

Advanced sett ngs

[ O K j L

C an c el ]

L

A pp ly ]

Chan g e the appearan c e o f you r displa ys

D etect ldent ofy

R6ol ut 1on: 10.l4 76d

Or i en t abor\:

Mukiple displays: l• d~IJ.ro;::

J nal chang~.

ConnKt to a prOJectOr (or pr~s he

II key and tap P)

M a ke text and other Items larger or smalltr

What d1~plty sett1ngs should I choose: ?

Advanced sett ngs

[ OK

=:J [

C a nc e l

::J [

A pply

72  Setting Up Your Monitor

(iii) For Windows ® 8

Ill Screen Resolution

00

1f '!J

<<

A pp ~ arance and Person aliza t i on .Displa y • Screen Resolution

C h a n ge t h e a pp eara n ce of y o u r di s pl a y s

Id e n t i fy

Displa y:

R e so lu t io n:

Orient ati on:

1366

X

768 landscape

Mu l t i p l e y s : Sho w desktop on ly on 1 Y

• You mu st s el ec

~~~~at~ et s: e~ ~ s::a y s nal c hang e s.

Makii!:thism y m

Sho w d es kt ~ o ~ on 2

Proj e ct to a second scr e en ( or press th e W i ndo w s l ogo k ey

II

P )

Make text and other items l arger or smaller

W hat displa y sett i ngs should I choos e ?

O K

Ill

00

Screen Resolution

L!l

« A ppe ara nc e a nd Personalization ~ D i sp la y ~ S<r~en Reso l ution

C h a n g e t h e a pp eara n c e o f your di s pl a y s

D ispla y:

L m

[ij> m

P2314 H n

3

R e solution: 1366

X

768

Or ientati on: landscape

Mu lti p l e d i spla y s: Sho w d es ktop o n ly on 2 ~

£'n

Y ou m u s t se lec o""""' ' 'h "' ; ' "' 'Y '

Extend these displa ys

J na l chang es .

Sho w deskto on ly on 1 ...

Mak:ethism y m

Project to .s second screen ( or p ress th e W indo w s l ogo k ey

P )

Malee text and other Items larger or smaller

W hat displa y settings shoul d I choose?

A d v a n c e d sett in gs

J ]

Se arch Control P;me l

0 s

...El

P I

~

Adva nced settmgs

Setting Up Your Monitor  73

advertisement

Key Features

  • Business 58.4 cm (23") LED IPS
  • Full HD 1920 x 1080 pixels 16:9
  • 8 ms 250 cd/m² 1000:1
  • 20 W

Related manuals

advertisement