Tempered
Tech- Armor
Instruction Manual
Read instruction manual before starting installation.
Pack Includes:
qe COR
ve
— e
O | | ©
Tempered Tech-Armor — Protective Tech-Armor Dust Home Button
for front of device for back of device Removers Stickers
Cleaning Set
Micro-fiber Assist Stick
Cloth
*For different brands and models of phones,
the component parts will be different.
1. Before installation, make sure all components are included
in the package as follows:
* 1 Tempered Tech-Armor front screen protector
* 1 Protective Tech-Armor rear film overlay
* 1 Cleaning Set (micro-fiber cloth and dust remover)
* 3 Home Button Stickers
2. Tempered Tech-Armor is for the front screen and the
Protective Tech-Armor is for the back of the device. Ensure
the components for each is correct before starting.
3. The following instructions must be followed in order to
achieve successful installation.
INSTALLATION INSTRUCTIONS
Installation Instructions for Tempered Tech-Armor:
Pre-Installation Cleansing Steps
1. Wash your hands thoroughly before installation.
2. Clean the device thoroughly using the Micro-fiber cloth,
List of Components
Tempered Tech-Armor front screen protector is designed slightly
smaller than the actual screen so that it can be used with a case
or other accessories.
— Tempered Tech-Armor
Device (sold separately)
Preparation for Installation of Tempered Tech-Armor
1. Remove the tear-off sheet from the back of the Tech-Armor
(adhesive side) before installing it onto the screen of the device
by utilizing the tab.
2. The front tear-off sheet
can be removed once
installation is complete.
Tempered
Tech-Armor
UT
BACK
Installation & Finishing
— Tempered Tech-Armor
1. Ensure dirt does not get onto the Tech-Armor as this will affect
the installation.
2. Carefully align and place the Tech-Armor onto the device,
ensuring that the speaker and home button are not covered
before placing onto the device.
3. Tempered glass ensures no air bubbles during installation.
4. After finishing installation, wipe the screen with the
Micro-fiber cloth,
READ AFTER INSTALLATION
In the event that the film is damaged during the installation
process, repair or replacement is not guaranteed.
Tempered Tech-Armor can be used with most Gmadix pouches,
flex gels, or snap-on covers.
Qmadix will not be held responsible for any damages caused to
devices due to not following the instructions listed in the
Tempered Tech-Armor Instruction Manual.
INSTALLATION INSTRUCTIONS CONT.
Installation Instructions for Protective Tech-Armor:
List of Components С
The front and back tear-off sheets
of the Protective Tech-Armor e
will need to be removed during
the installation process. | Tech-Armor
*Each Protective Tech-Armor will vary _
depending on the device it is made for. EYL Tee of
Preparation for Installation of Protective Tech-Armor
Protective Tech-Armor
Tab of Tech-Armor
back tear-off sheet
1. Holding the tab of the tear-off sheet on the back of the
Tech-Armor, peel 1/3 off (see above picture).
2. Front tear-off sheet can be removed once installation is complete.
Alignment & Installation
1. Ensure dirt does not get onto the Protective Tech-Armor as this
will affect the installation.
2. Starting from the top of the device, align the camera and edges
of the Tech-Armor with the device before attaching it.
3. Peel off the rest of the tear-off sheet, allowing the Tech-Armor
to adhere to the device.
4. While slowly peeling away the remainder of the sheet, gently
press down onto the Tech-Armor film overlay.
Protective
Tech-Armor Back tear-off
sheet
Device
Finishing
Using the Assist Stick or Micro-fiber cloth, pressing down, stroke
the Protective Tech-Armor from the center outwards.
Tip: To achieve best results,
cover the Assist Stick with
the Micro-fiber cloth and
repeat the process.
OPTIONAL HOME BUTTON STICKER
Tempered Tech-Armor has 3 Home Button Stickers for optional use.
1. Be sure Tempered Tech-Armor front
tear-off sheet has been removed.
2. Select one sticker and attach
to home button on the device.
DUST REMOVER
Use the dust remover sticker to remove dirt and dust that sticks
onto the Tempered Tech-Armor or behween the Tempered
Tech-Armor and device.
Limited Warranty e.
This Qmadix" product comes with a warranty effective for ninety days starting
on the date of the original purchase. This waranty does not cover damages
resulting from accident, misuse, abuse, tampering, or modification. In no event
will @madix™ be liable for damages in excess of purchase price. See
www.gmadix.com for additional information.
Madein Korea 110412 www.qmadix.com
Gmadi>x Inc., Panorama City, CA 91402
">
