PORTABLE DIGITAL AUDIO PLAYER Basic Model : HT

PORTABLE DIGITAL AUDIO PLAYER Basic Model : HT
PORTABLE DIGITAL AUDIO PLAYER
Basic Model : HT-XQ100
* Application : HT-XQ100
HT-TXQ100
SERVICE
DVD RECEIVER AMP SYSTEM
Manual
Features
* Multi-Disc Playback & FM Tuner
* Dolby Pro Logic II
* DTS (Digital Theater Systems)
* TV Screen Saver Function
* USB Host Play
MODEL : HT-XQ100
* DVD-Audio compatible
* Power Saving Function
* HDMI
* Optional Wireless receiver amplifier
- Confidential -
INDEX
Ch1
Precautions
1-1. Safety Precautions
1-2. Servicing Precautions
1-3. Precautions for Electrostatically
Sensitive Device (ESDs)
1-4. Special Precautions and Warning
Lables for Laser Products
1-5. Special Precautions for HDD
Ch2
1-3
1-4
1-5
2-2
2-3
2-4
3-1
3-2
3-3
Adjustments
MICOM Initialixation & Update
Ch5
4-1
How to disassemble
How to disassemble
Ch6
Ch7
5-1
Troubleshooting
1. Power
2. Output
3. PROTECTION
6-1
6-2
6-4
Exploded View & Parts List
1. Total Exploded View
2. Parts List
Ch8
MAIN
9-1
DVD
9-2
Ch10
Wiring Diagram
Ch11
7-1
7-5
8-1
10-1
PCB Diagram
1.Descriptions of Major PCB Parts
11-1
2. MAIN PCB Check'
11-7
3. AMP PCB Check
11-13
4. SMPS PCB Check
11-15
Ch12
Schematic Diagram
1. AMP
12-1
2. FRONT
12-2
3. MPEG
12-3
4. DSP
12-4
5. MICOM
12-5
6. FUNC
12-6
7. HDMI
12-7
8. IN-OUP
12-8
9. PH-USB
12-9
10. RF
12-10
11. SPK Jack
12-11
12. Wireless
12-12
Ch13
Electrical Parts List
Electrical Parts List
Block Diagram
Wiring Diagram
Product Functions
1. SPK Connection & Setup
2. Main Functions
3. New Functions
Ch4
1-1
1-2
Product Descriptions
2. Specifications
3. Notes on Discs
4. Accessories
Ch3
Ch9
Circuit Description
1. Description
13-1
2. Function Description
13-4
Ch14
HTS Reference
1. HTS (Home Theater Sytsem)
14-1
2. About “Sound”
14-2
1. Precautions
Follow these safety, servicing and ESD precautions to prevent damage and protect against potential hazards
such as electrical shock and X-rays.
1-1 Safety Precautions
1. Be sure that all of the built-in protective
devices are replaced.
2. When reinstalling the chassis and its
assemblies, be sure to restore all protective
devices, including control knobs and
compartment covers.
3. Make sure that there are no cabinet
openings through which people-particularly children--might insert fingers
and contact dangerous voltages. Such
openings include the spacing between the
picture tube and the cabinet mask,
excessively wide cabinet ventilation slots,
and improperly fitted back covers.
4. Design Alteration Warning:
Never alter or add to the mechanical or
electrical design of the unit. Example: Do
not add auxiliary audio or video connectors. Such alterations might create a safety
hazard. Also, any design changes or additions will void the manufacturer's warranty.
5. Leakage Current Hot Check (Figure 1-1):
Warning: Do not use an isolation
transformer during this test. Use a leakagecurrent tester or a metering system that
complies with American National Standards
Institute (ANSI C101.1, Leakage Current for
Appliances), and Underwriters Laboratories
(UL Publication UL1410, 59.7).
Fig. 1-1 AC Leakage Test
6. Insulation Resistance Cold Check:
(1) With the unit's AC plug disconnected
from the AC source, connect an electrical
jumper across the two AC prongs. (2) Set
the power switch to ON. (3) Measure the
resistance between the shorted AC plug and
any exposed metallic parts. Example:
Screwheads, antenna, control shafts or
handle brackets.
If any of the exposed metallic parts has a
return path to the chassis, the measured
resistance should be between 1 and 5.2
megohms. If there is no return path, the
measured resistance should be "infinite." If
the resistance is outside these limits, a shock
hazard might exist. See Figure 1-2
With the unit completely reassembled, plug
the AC line cord directly into a 120V AC
outlet. With the unit's AC switch first in
the ON position and then OFF, measure the
current between a known earth ground
(metal water pipe, etc.) and all exposed
metal parts. Examples: Handle brackets,
metal cabinets, screwheads and control
shafts. The current measured should not
exceed 0.5 milliamp. Reverse the powerplug prongs in the AC outlet and repeat.
Fig. 1-2 Insulation Resistance Test
Samsung Electronics
1-1
Precautions
1-1 Safety Precautions (Continued)
7. Components, parts and wiring that appear
to have overheated or that are otherwise
damaged should be replaced with parts
that meet the original specifications.
Always determine the cause of damage or
overheating, and correct any potential
hazards
8. Observe the original lead dress, especially
near the following areas: Antenna
wiring, sharp edges, and especially the
AC and high voltage power supplies.
Always inspect for pinched, out-of-place,
or frayed wiring. Do not change the
spacing between components and the
printed circuit board. Check the AC
power cord for damage. Make sure that
no wires or components touch thermally
hot parts.
9. Product Safety Notice:
Some electrical and mechanical parts
have special safety-related characteristics
which might not be obvious from visual
inspection. These safety features and the
protection they give might be lost if the
replacement component differs from the
original--even if the replacement is rated
for higher voltage, wattage, etc.
10 Components that are critical for safety are
indicated in the circuit diagram by
shading,
or
. Use replacement
components that have the same ratings,
especially for flame resistance and
dielectric strength specifications. A
replacement part that does not have the
same safety characteristics as the original
might create shock, fire or other hazards.
1-2 Servicing Precautions
Warning1:
First read the "Safety Precautions" section of this manual. If some unforeseen circumstance creates a conflict
between the servicing and safety precautions, always follow the safety precautions.
1. Servicing precautions are printed on the
cabinet. Follow them.
2. Always unplug the unit's AC power cord
from the AC power source before
attempting to: (a) Remove or reinstall any
component or assembly, (b) Disconnect an
electrical plug or connector, (c) Connect a
test component in parallel with an
electrolytic capacitor.
3. Some components are raised above the
printed circuit board for safety. An
insulation tube or tape is sometimes used.
The internal wiring may be clamped to
prevent contact with thermally hot
components. Reinstall all such elements to
their original position.
4. After servicing, always check that the
screws, components and wiring have been
correctly reinstalled. Make sure that the
portion around the serviced part has not
been damaged.
1-2
5. Check the insulation between the blades of
the AC plug and accessible conductive parts
(examples: metal panels, input terminals
and earphone jacks).
6. Insulation Checking Procedure: Disconnect
the power cord from the AC source and
turn the power switch ON. Connect an
insulation resistance meter (500V) to the
blades of the AC plug.
The insulation resistance between each
blade of the AC plug and accessible
conductive parts (see above) should be
greater than 1 megohm.
7. Never defeat any of the B+ voltage
interlocks. Do not apply AC power to the
unit (or any of its assemblies) unless all
solid-state heat sinks are correctly installed.
8. Always connect a test instrument's ground
lead to the instrument chassis ground
before connecting the positive lead; always
remove the instrument's ground lead last.
Samsung Electronics
Precautions
1-3 Precautions for Electrostatically Sensitive Devices (ESDs)
1. Some semiconductor ("solid state") devices
are easily damaged by static electricity.
Such components are called Electrostatically
Sensitive Devices (ESDs). Examples include
integrated circuits and some field-effect
transistors. The following techniques will
reduce the occurrence of component
damage caused by static electricity.
5. Use only a grounded-tip soldering iron
when soldering or unsoldering ESDs.
2. Immediately before handling any
semiconductor components or assemblies,
drain the electrostatic charge from your
body by touching a known earth ground.
Alternatively, wear a discharging
wrist-strap device. (Be sure to remove it
prior to applying power--this is an electric
shock precaution.)
7. Do not remove a replacement ESD from its
protective package until you are ready to
install it. Most replacement ESDs are
packaged with leads that are electrically
shorted together by conductive foam,
aluminum foil or other conductive
materials.
6. Use only an anti-static solder removal
device. Many solder removal devices are
not rated as "anti-static" (these can
accumulate sufficient electrical charge to
damage ESDs).
8. Immediately before removing the protective
material from the leads of a replacement
ESD, touch the protective material to the
chassis or circuit assembly into which the
device will be installed.
3. After removing an ESD-equipped assembly,
place it on a conductive surface such as
aluminum foil to prevent accumulation of
electrostatic charge.
4. Do not use freon-propelled chemicals.
These can generate electrical charges that
damage ESDs.
9. Minimize body motions when handing
unpackaged replacement ESDs. Motions
such as brushing clothes together, or lifting
a foot from a carpeted floor can generate
enough static electricity to damage an ESD.
1-4 Special Precautions and Warning Labels for Laser Products
(UL)
(CSA)
This Product Complies with
DHHS Rules 21CFR, Sub
chapter J.At date of Manufacture
(UL,CSA,EU)
CERTIFIED ONLY TO CANADIAN
ELECTRICAL CODE.
CLASS 1
LASER PRODUCT
CERTIFIE EN VERTU DU CODE
CANADIAN DE LELETRICITE
SEULEMENT
Fig. 1-3 Warning Labels (Location: Enclosure Block)
(UL,CSA,SCAN)
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATEO AVOIDEXPOSURE TO BEAM
ADVARSEL: USYNLIG LASERSTRÅLING VED ABNING
NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION
UNDGA UDSAETTELSE FOR STRALING
VARO:AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTINA NAKYMATTÖMALLE LASERSATEILYLLE ALA
KATSO SATEESEEN!
VARNING:OSYNLIG LASERSTRÅLNING NAR DENNA DEL
(EU)
UL
CSA
EU
SCAN
: Manufactured for U.S.A. Market.
: Manufactured for Canadian Market.
: Manufactured for European Market.
: Manufactured for Scandinavian
Market.
AR OPPNAD OCH SPARREN AR URKOPPLAD BETRAKTA
EJSTRÅLEN!
Fig. 1-4 Warning Labels (Location: Disc Clamper, Inner Side of Unit Door or Nearby Unit Chassis )
Samsung Electronics
1-3
Precautions
1-4 Special Precautions and Warning Labels for Laser Products (Continued)
1-4-1 Warnings
1. When servicing, do not approach the LASER
exit with the eye too closely. In case it is
necessary to confirm LASER beam emission,
be sure to observe from a distance of more
than 30 cm from the surface of the objective
lens on the optical pick-up block.
2. Do not attempt to handle the objective lens
when the DISC is not on the tray.
1-4-2 Laser Diode Specifications
Material: GaAs+ GaAlAs
Wavelength: 760-800 nm
Emission Duration: Continuous
Laser Output: 0.2 mw (measured at a
1.6 mm distance from the objective lens
surface on the optical pick-up block.)
1-4-3 Handling the Optical Pick-up
1. Static electricity from clothing or the body
may cause electrostatic breakdown of the
laser diode in the Optical Pickup. Follow
this procedure:
2. Place a conductive sheet on the work bench
(i.e., the black sheet used for wrapping
repair parts.) Note: The surface of the work
bench should be covered by a copper
ground plane, which is grounded.
3. The repair technician must wear a wrist
strap which is grounded to the copper sheet.
4. To remove the Optical Pickup block:
Place the set on the conductive sheet, and
momentarily touch the conductive sheet
with both hands. (While working, do not
allow any electrostatic sources--such as
clothes--to touch the unit.)
5. Ground the "Short Terminal" (located on the
PCB, inside the Pickup Assembly) before
replacing the Pickup. This terminal should
be shorted whenever the Pickup Assembly
is lifted or moved.
6. After replacing the Pickup, reopen the Short
Terminal. See diagrams below:
1-5 Special Precautions for HDD
* HDD Data Maintenance Step
1. Since the data on the HDD is weak to mechanical shock, place the HDD in a safe
location that is free from mechanical shock once it is removed from the main unit.
2. In order to safe keep the data on the HDD, back up the data before the repair or
make sure not to place the HDD near any electrical appliance that generates a strong
magnetic field.
1-4
Samsung Electronics
2. Product Description
1. Specifications
G
E
N
E
R
A
L
T
F U
N
M E
V
I
D
E
O
R
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
Component Video
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
XQ100
S
P
E
A
K
E
R
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
Samsung Electronics
90W
5 kg
521 x 320 x 178 mm
41°F ~ 95°F
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
80W x 2(3Ω)
80W
80W x 2(3Ω)
100W(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
3Ω
3Ω
150Hz~20kHz
40Hz~200Hz
82dB/W/M
85dB/W/M
100W
100W
160W
200W
Front 170x 470 x 170 mm
Rear
97 x 206 x 79 mm
Center 442 x 94 x 76 mm
Subwoofer 160 x 363 x 394 mm
Front 1.6 kg
Rear
0.7 kg
Center 1 kg
Subwoofer 7.8 kg
2-1
2. Notes on discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
Audio + Video
DVD
8cm
COMPACT
Audio + Video
VIDEO-CD
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
DivX
MPEG4
MP3
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
2-2
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Samsung Electronics
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may
not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
CD-R/RW DivX Discs
• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the
user might not be played.
• Software update for unsupported formats is not supported.
(Example: QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with high frame rate might not be played while playing a DivX file.
• For more information about the formats authorized by DivX Networks, Inc., visit "www.divxnetworks.net".
Samsung Electronics
2-3
3. Accessories
Commodity Photo
Commodity Name
Remote Control
Batteries for Remote
Control (AAA Size)
2-4
Materials Cord
AH61-02204A
AH61-02204A
Video Cable
AH61-02204A
FM Antenna
AH61-02204A
ANYNET Cable
AH61-02204A
HDMI Cable
AH61-02204A
Otical Cable
AH61-02204A
User's Manual
AH61-02204A
Samsung Electronics
3. Product Functions
1. SPK connection
Accessories
Remote Control
HDMI Cable
Video Cable
FM Antenna
User's Manual
Description
—Front Panel—
Power (
Eject button
Disc Insert Hole
Display
) button
—Side Panel—
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
Function button
Volume control
button
External Digital Optical
Input Connector
Use this to connect external equipment
capable of digital output.
TX Card Connector
Component Video Output
Connectors
Headphone Jack
External Audio
Input Connectors
USB Port
Connect a TV with component video
inputs to these jacks.
HDMI OUT Port
FM Antenna Connector
button
Play/Pause (
) button
Stop ( ) button
Tuning up & Skip (
) button
Tuning up & Skip (
) button
—Rear Panel—
5.1 Channel Speaker
Cooling Fan
Output Terminals
Cooling Fan
Samsung Electronics
3-1
2. Main Functions
Disc Playback
C
SW
L
R
LS
1
Load a disc vertically into the Disc
Insert Hole.
2
To eject the disc, press the EJECT
button
• Insert a disc so that the label side faces forward.
RS
DVD
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
Selecting the Listening Position
VCD
CD
• Playback starts automatically.
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Note
• Depending on the content of the disc, the initial screen may appear different.
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Caution
speakers.
• Avoid getting fingerprints on the writing surface of a disc.
It may cause the disc to not read properly.
Center Speaker C
• It is best to install it at the same height as the front
Subwoofer SW
• The position of the subwoofer is not so critical.
• You can also install it directly over or under the TV.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
Selecting Audio/Subtitle Language
HT-XQ100/HT-XQ100W
Center Speaker
Audio Language Selection Function
Front Speaker (R)
Front Speaker (L)
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
Subwoofer
FR 3/3
Rear Speaker (R)
Rear Speaker (L)
Subtitle Language Selection Function
Connecting the Speakers
1
Press down the terminal
tab on the back of the
speaker.
2
Insert the black wire into the
black terminal (–) and the red
wire into the red (+) terminal,
and then release the tab.
Black
3
Connect the connecting plugs to the back
of the Home Theater.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
1
Press INFO button
twice.
2
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
• To operate this function, you can also
Red
or
Caution
• Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. If this occurs, place the speaker
away from your TV set.
EN 1/3
EN 01/ 03
OFF
Note
press the Select AUDIO or Select
SUBTITLE buttons on the remote control.
• Depending on the disc, the Subtitle
and Audio Language functions may
not be available.
SP 02/ 03
FR 03/ 03
OFF / 03
3-2
Samsung Electronics
Using Disc Menu
DVD
Subtitle Display
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
1
In Stop mode,
press MENU
button.
• When playing a VCD (version 2.),
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select Disc Menu and it is not
3
Press Cursor ,
, buttons to
select the desired
item.
• Each time you press the button, your selection will toggle between “SUBTITLE (1/1, 1/2 ...)” and
• If the disc has only one subtitle file, it will be played automatically.
• Below for more details concerning Subtitle usage with DIVX discs.
“SUBTITLE OFF”.
• Press ENTER button.
supported by the disc, the "This menu is not
supported" message appears on the screen.
this toggles between PBC ON
and OFF.
Press the SUBTITLE button.
Audio Display
Press the AUDIO button.
MOVE
ENTER
MOVE
EXIT
ENTER
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between “AUDIO (1/1, 1/2 ...)” and
EXIT
Note
• Disc menu display may be different depending on the disc.
Note
•
"
“
”.
" is displayed when there is one supported language in the disc.
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions
may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
Using the Title Menu
DVD
1
2
Press Cursor ,
button to move to
‘Title Menu’.
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology
to provide audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
at near DVD-quality video and audio.
1. Supported Formats
• This product only supports the following media formats.If both video and audio formats are not
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, the availability of this feature may vary.
In Stop mode,
press MENU
button.
DivX(Digital internet video eXpress)
supported, the user may experience problems such as broken images or no sound.
3
●
Press ENTER
button.
Supported Video Formats
Format
Supported Versions
●
WMV
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
Sampling Frequency
• The title menu appears.
AVI
DivX3.11 ~ 5.1
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
MOVE
ENTER
EXIT
MOVE
ENTER
Press MENU button to exit the setup screen.
• Title menu display may be different depending on the disc.
Note
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may
EXIT
experience shaking on the screen during playback.
2. Caption Function
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media
•
3. New Functions
DivX Playback
file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name.
Setting TV Screen type
• The functions on this page apply to DIVX disc playback.
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
Skip Forward/Back
During playback, press the
button.
• Goes to the next file whenever you press
button, if there are over
2 files in the disk.
• Goes to the previous file whenever you press
button, if there are
1
over 2 files in the disk.
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Fast playback
To play back the disc at a faster speed,
press
or
during playback.
MOVE
ENTER
MOVE
EXIT
ENTER
EXIT
• Each time you press either button, the playback speed will change as
follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
3
5 Minute Skip function
During playback, press the
,
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
• Once the setup is complete, you will
button.
• Playback skips 5 minutes forward whenever you press
• Playback skips 5 minutes back whenever you press
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
be taken to the previous screen.
button.
button.
Zoom Function
MOVE
1
Press ZOOM
button.
2
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
Press RETURN button to return to the previous level.
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
• DIVX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX
Press MENU button to exit the setup screen.
and may not be playable in this unit.
Samsung Electronics
3-3
Adjusting the TV Aspect Ratio (Screen Size)
Compatible Devices
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
1. USB devices that support USB Mass Storage v1.0.
(USB devices that operate as a removable disk in Windows
(2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
• For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference.
Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• You can enjoy the widescreen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
●
4:3PS
(4:3 Pan&Scan)
Supported Formats
File name
File
extension
Bit rate
Version
Pixel
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
Still Picture
JPG
JPG .JPEG
–
–
640*480
–
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Music
MP3
.MP3
80~384kbps
–
–
44.1kHz
WMA
.WMA
56~128kbps
V8
–
44.1kHz
VCD
MPG.MPEG .DAT
1.5Mbps
VCD1.1,VCD2.0
320*480
44.1KHz
V1,V2,V3,V7
720*480
44.1KHz~48KHz
720*480
44.1KHz~48KHz
Movie
Note
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
WMV
.WMV
4Mbps
DivX.
AVI,.ASF
4MbpsDivX3.
11~DivX5.1,Xvid
Sampling
Frequency
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation
when connected to a PC are not supported.
• A device using NTFS file system is not supported.
(Only FAT 16/32 (File Allocation Table 16/32) file system is supported.)
• Some MP3 players, when connected to this product,may not operate depending on
the sector size of their file system.
• The USB HOST function is not supported if a product that transfers media files by
its manufacturer-specific program is connected.
Playing Media Files using the USB HOST feature
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
1
Connect the USB
device to the USB
port on the rear of
the unit.
2
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices.
For information on the supported devices, see pages 75.
Press the FUNCTION
button on the main
unit or the USB button
on the remote control
to select the USB
mode.
• “USB” appears on the display screen
and then disappears.
• USB MENU screen appears on the TV
screen and the saved file is played.
To stop playback, press the STOP (
) button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal
before disconnecting the USB cable.
(1) Press the Stop button twice in a row.
The display will show REMOVE ➞ USB.
(2) Remove the USB cable.
Skip Forward/Back
During playback, press the
• When there is more than one file, when you press the
• When there is more than one file, when you press the
button.
button, the next file is selected.
button, the previous file is selected.
Fast playback
To play back the disc at a faster speed, press
or
during playback.
• Each time you press either button, the playback speed will change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
3-4
Samsung Electronics
4. Adjustments
MICOM Initialization & U
Initializing the Micom
In STANDBY status, press and hold the ‘STOP’ button for more than 5 seconds.
After that, the red STANDBY LED blinks and the Micom is reset.
Updating the Micom
There is a 6-pin connector port at the rear of the Home Theater.
Connect the 6-pin cable to this port and start the update.
For an update, the following are needed.
(Computer, ROM-Writer, Connection Cable, Update Program)- OTP is available only for a Flash Micom.
Checking the Micom and MPEG Versions
1) Play a DVD or CD.
2) Open the disc tray and press the Menu button on the remote control.
3) Press the ‘8’, ‘9’ and ‘5’ numeric keys in sequence and press the ‘Select’ button.
Initializing and Updating the DVD Flash Memory
1) Prepare a CD or USB storage device including a HEX file for the update. Insert the CD into the disk tray or
connect the USB storage device to the Home Theater.
2) When you turn the power on, the ‘Updating’ message appears on the screen and then the power is
turned on and off.
3) When the disk tray opens, remove the disk.
4) In “No Disc” status, if you press the ‘STOP’ button for more than 5 seconds, the ‘INITIALIZE’ message
appears on the screen and the power is turned off.
5) The initialization is complete.
Samsung Electronics
4-1
5. How to disassemble
Disassembling
Picture
1. Separating the Rear Cover and Rear Cabinet /Stand
Assy
1. Separate the Rear Cover by pulling it away.
2. Remove the 14 screws.
3. Detach the internal fan connection cable slowly
and carefully
4. Separate the SMPS connection cable.
2. Separating the Main PCB
Remove the 2 screws and separate the 8
connected cables.
5-1
Samsung Electronics
Disassembling
Picture
3. Separating the Wireless PCB
Remove the screw.
4. Separating the Tuner PACK
Remove the screw.
Carefully separate the Tuner PACK, which is held
on by 2 catches.
5. Separating the AUX-PCB and HDMI-PCB
Remove the 2 screws and separate the cable
connected to the AUX-PCB and HDMI-PCB.
6. Separating the AMP-PCB
Remove the 2 screws and separate the connected
cable.
Samsung Electronics
5-2
Disassembling
Picture
7. Separating the AMP-PCB
Remove the screw.
8. Separating the Phone/USB PCB
Remove the screw.
9. Separating the DVD-Mecha
1. Remove the 2 screws. Separate the Holder
PCB Main.
2. Remove the 3 screws.
10. Separating the Power / Open PCB
Remove the 3 screws.
Remove the 2 screws.
5-3
Samsung Electronics
Disassembling
Picture
11. Separating the FUNCTION
Remove the 3 screws and separate the cable connected.
12. Separating the Front PCB
1. Remove the 3 screws and separate the
Central Cabinet.
2. Remove the 3 screws.
Samsung Electronics
5-4
5-2. Disassembling the HT-XQ100 Mecha (Mecha-Deck)-DECK)
Disassembling
Picture
1. You have to short the marked part on the
figure before separating the Flat Cable to
protect the Pick-Up.
2. Separate the Pick-Up Cable from the Holder.
5-5
Samsung Electronics
Disassembling
…Pictureł
2
3. Remove the 2 screws and separate the
Holder Cable.
4. Remove the 2 screws and separate the
Traverse-Deck.
5. After replacing the Traverse Deck, reassemble in the reverse order.
Samsung Electronics
5-6
6. TroubleShooting
1. POWER
UIC1
Main PCB; pin
#14,40,55,89(5V)
NO
NO
Check for Circuit at SMPS
PCB
;FUSE(F1),T2(open or short)
Check NORMAL
VOLTAGE at SMPS PCB
;ZD3 (1N5231)(5V)
NO
Replace ZD4.
Check Resistance from GND
to pin #22 of MICOM 5V(UIC1)
If the short (0 ohm),
Replace MICOM (UIC1)
Check pattern from CON3
to pin #22 of UIC1(5V)
YES
Check for
SMPS POWER
at MAIN PCB(MCON3)
:#1~#12(5V)
NO
Replace MCON3
wire
YES
Check for
POWER-SENSE(5V)
at Main PCB
;pin #22 of UIC1
POWER PCB
(SMPS)
C42(+) CHECK(5V)
NO
Check pattern between
All VDD to ALL GND(Short Test)
YES
Check for connector from Main PCB to
Front PCB ;Front FCN4, Main
MCON4
6-1
Samsung Electronics
2. Output
Check Voltage at
AMP PCB J3 is
about 31.5V?
NO
Check connector J3
Check T1 (Trans)
Check BD1, F1(Fuse)
NO
Check Voltage for
; 3.3 V (EL6,BEAD)
YES
Check audio channel
at MIC1(TAS5508)
PWM signal
YES
Check
IC1R,IC1L,IC1CW is
broken?
NO
Replace MIC1
(Modulator IC TAS5508)
Check Voltage at MIC1 DVDD
(pin #15,36) ;3.3 V
NO
Check for COIL
L1FR,L1FL,L1YR,L1YL,L1RL,L1RR
L2FR,L2FL,L2YR,L2YL,L2RL,L2RR
(OPEN or SHORT ?)
PWM : AMP PCB MIC1
Pin#40,41,42,43,44,45,46,47,49,50,51,52
YES
Replace POWER stage IC
LRCLK : AMP PCB J7 Pin#11
Samsung Electronics
TBCK : AMP PCB J7 Pin#12
MCLK : MAIN PCB J7 Pin#21
6-2
3. PROTECTION(When Power ON and 'PROTECTION' Mark is displayed)
AMP PCB J3,J7
Connection Check
NO
Reconnect
YES
When J3 is detached,
Check SMPS(31.5V)
NO
Replace SMPS
YES
When J7 is detached,
Check PROTECTION
NO
Check MAIN PCB
YES
Check AMP PCB
IC1R,IC1L,IC1CW is
broken?
YES
Replace AMP IC
NO
Check SPK OUTPUT
SHORT?
YES
Check AMP PCB Pattern and
Solder
NO
Replace AMP PCB Ass'y
6-3
Samsung Electronics
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or
if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
I cannot eject the disc.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this Home
Theater.
• Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
• When listening to a CD or radio, sound is output to the front
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
Samsung Electronics
•
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six
speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
6-4
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Is the remote control being operated within its operation range of
The remote control does
not work.
angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be
changed.
• The main unit is not
working. (Example: The power
them. And depending on the disc, they may work differently.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
goes out or strange noise is heard.)
• The Home Theater is
not working normally.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
6-5
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
Samsung Electronics
7.Exploded Views and Parts List
1. Total Exploded View
AH342
AC290
AS221
AH367
AS198
AK270
AL140
AK290
AC285
AC040
AC320
AK265 AK170
AH340
AC010
AD300
AD255
AS100 AH312
AC305
AS376
AB323
AB323
AS374
AF025
Samsung Electronics
7-1
2. Parts List
Location
No
AA130
AA218
AC040
AC050
AC285
AC290
AC305
AC320
AD255
AH312
AH340
AH342
AH367
AK170
AK265
AK270
AM020
AS040
AS198
AS221
- This pag
pag e includes
includes par ts contents that ser vice is av
av ailable
ailable Part No.
AH97-01670A
AH97-01671A
AH64-03967B
AH64-03968A
AH63-01176A
AH63-01174A
AH63-01175A
AH63-01177B
AH64-03981B
AH61-02163A
AH61-02164A
AH61-02165D
AH61-02171A
AH64-03971B
AH64-03972B
AH64-03969B
AH31-00039B
6003-001129
AH63-01178A
AH63-01224A
Samsung Electronics
Description; Specification
ASSY-FRONT;ABS,HT-XQ100,ASSY-STAND;ABS+SECC,HT-XQ100,CABINET-MIDDLE;HT-XQ100,ABS 94HB,2.5,-,CABINET-REAR;HT-Q100,ABS 94HB,2.5,-,-,-,
COVER-POWER CORD;HT-Q100,ABS 94HB,2.5,-,
COVER-REAR;HT-Q100,ABS 94HB,2.5,-,-,-,-,
COVER-STAND;HT-Q100,ABS 94HB,2.5,-,-,-,COVER-USB;HT-XQ100,ABS+ELAS,0.8,-,-,-,-,
DECORATION-NAVIGATION;HT-XQ100,ABS 94HB,
HOLDER-LED;HT-Q100,ABS 94HB,-,-,BLK,-,HOLDER-PCB MAIN;HT-Q100,ABS 94HB,-,-,BLK
HOLDER-PCB AUX;HT-XQ100,ABS 94HB,-,-,BLK
HOLDER-RUBBER;HT-Q100,URETHANE,-,-,BLK,KNOB-FUNCTION;HT-XQ100,ABS 94HB,-,-,-,-,
KNOB-NAVIGATION;HT-XQ100,ABS 94HB,-,-,-,
KNOB-OPEN;SPACE
MOTOR FAN;C151BK10A2430,RDM5015S,0.12A,SCREW-TAPTITE;BH,+,2,M3(DOUBLE),L14,ZPC(
SHIELD-FRONT;HT-Q100,SECC,0.5,-,-,-,SHIELD-PHONE;HT-Q100,SPTE,0.4,130,40,-,-
Q’TY
1
1
1
1
1
1
1
1
1
1
1
1
6
1
1
1
1
19
1
1
- This pag
pag e includes
includes par ts contents that ser vice is av
av ailable
ailable -
8. Electrical Parts List
Location no.
Code no.
*****
AC1
AC19
AC23
AC9
AIC3
AQ1
AR1
AR8
BC25
BD12
C10C
C12
C14
C19C
C1FR
C21
C22FR
C24C
C4
C5
C8
C8YL
CD101
CN1
CON1
CON13
CON4
CON6
D1
D2
DD2
EC55
FB13
FBN1
FBN11
FBN2A
FBN2B
FC3
FCN1
FCN4
FD97
FIC1
FJ1
FJ2
FJ3
FKD1
FKR15
FKR17
FQ1
FR1
FR1
FR12
FR2
FR3
FSW8
FSW9
H/S
H/S
HC6L
HC8
HD1
HIC
HIC1
HL1L
HOLDE
HPC7
HPL1R
HR1
HR2
HR30
HR4
HR8R
HREG1
HREG2
IC1R
IC2
J11
J3
JC12
JC14
JC19
JC2
JC5
JCON2
2401-000651
2203-005148
2203-002398
2401-000414
1002-001392
0501-002184
2007-000094
2007-000091
2402-000009
3301-000314
2305-000407
2203-001071
2203-000405
2203-005171
2203-000236
2402-001198
2203-000787
2401-002300
2401-000303
2203-000815
2402-001049
2401-004106
AH65-30010A
3708-001618
3710-002223
3708-001934
3701-001314
3711-005306
0401-001090
0401-001099
0403-001062
2203-005249
3301-001495
3711-000967
AH39-00871A
AH39-00869A
3711-000906
2401-001508
3711-003591
3708-001837
0601-002151
0609-001187
AH39-00866A
3711-000028
3711-000814
0601-001238
2007-000079
2007-000082
0501-000422
2001-000415
2007-000121
2003-000708
2007-000451
2003-000775
3404-000165
3404-001242
AH62-00119C
AH62-00062G
2203-000998
2401-000042
0402-000309
1201-000163
1204-002421
2703-000404
AH61-02117A
2203-000531
2701-000179
2007-000309
2007-000075
2007-000362
2007-001164
2007-000097
1203-003091
1203-002935
1201-002270
1003-001561
2007-000134
AH39-00870A
2203-000315
2203-001640
2401-001092
2203-000626
2203-000280
3710-002342
Description & Specification Remarks
HT-XQ100 Parts List
*****
C-AL;2.2uF,20%,50V,GP,TP,4x7,5
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;22nF,10%,50V,X7R,1608
C-AL;10uF,20%,16V,GP,TP,4x7,5
IC-A/D CONVERTER;WM8775EDS,24BIT,SSOP,28
TR-SMALL SIGNAL;KTD1304,NPN,200mW,SOT-23
R-CHIP;22Kohm,5%,1/10W,TP,1608
R-CHIP;12Kohm,5%,1/10W,TP,1608
C-AL,SMD;47uF,20%,6.3V,GP,TP,5.3x5.3x5.
BEAD-SMD;120ohm,1.6x0.8x0.8mm,-,-,C-FILM,LEAD-PEF;470nF,5%,100V,TP,-,5mm
C-CER,CHIP;0.056nF,5%,50V,C0G,1608
C-CER,CHIP;0.18nF,5%,50V,C0G,1608
C-CER,CHIP;1000nF,10%,16V,X7R,2012
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-AL,SMD;330UF,20%,6.3V,GP,TP,6.6X6.6X7
C-CER,CHIP;0.33NF,5%,50V,C0G,TP,2012
C-AL;47uF,20%,50V,GP,TP,6.3x11,5
C-AL;100uF,20%,25V,GP,TP,6.3x11,5
C-CER,CHIP;0.033nF,5%,50V,C0G,1608
C-AL,SMD;10uF,20%,16V,GP,TP,3.3x3.3x5.4
C-AL;680uF,20%,50V,-,BK,12.5 x 35,5
CLAMP-WIRE;-,-,-,-,-,CONNECTOR-FPC/FFC/PIC;5P,1mm,SMD-A,Sn-Pb
SOCKET-BOARD TO CABLE;30P,2R,2mm,SMD-S,A
CONNECTOR-FPC/FFC/PIC;13P,1.25MM,STRAIGH
CONNECTOR-HDMI;19P,2R,FEMALE,SMD-A,AU
HEADER-BOARD TO CABLE;BOX,4P,1R,2MM,SMDDIODE-SWITCHING;1SS355,80V,100MA,SOD-323
DIODE-SWITCHING;1N4148WS,75V,150mA,SOD-3
DIODE-ZENER;UDZ4.7B,4.55-4.75V,200MW,SOD
C-CER,CHIP;100nF,10%,50V,X7R,1608
BEAD-SMD;120ohm,2012,2500mA,TP,115ohm/1
HEADER-BOARD TO CABLE;BOX,4P,1R,2mm,ANGL
WIRE HARNESS;HT-XQ100,4P,2mm,50mm,UL,4P,
WIRE HARNESS;HT-XQ100,3P,2mm,200mm,UL,3P
HEADER-BOARD TO CABLE;BOX,3P,1R,2MM,ANGL
C-AL;47uF,20%,16V,GP,TP,6.3x5,5
HEADER-BOARD TO CABLE;BOX,4P,1R,2mm,SMDCONNECTOR-FPC/FFC/PIC;15P,1mm,SMD-S,Sn-P
LED;SMD,BLUE,1.6x0.8x0.35mm,468nm,
MODULE REMOCON;HORIZONTAL,12.4mm,TR
WIRE HARNESS;HT-XQ100,4P,2mm,100mm,UL,4P
HEADER-BOARD TO CABLE;BOX,4P,1R,2MM,STRA
HEADER-BOARD TO CABLE;BOX,2P,1R,2.5mm,AN
LED;LTL-1CHESS-UA,ROUND,RED,3.1mm,697nm
R-CHIP;1.8Kohm,5%,1/10W,TP,1608
R-CHIP;3.3Kohm,5%,1/10W,TP,1608
TR-SMALL SIGNAL;KTA1273,PNP,-30V,-30V,-2
R-CARBON;18ohm,5%,1/4W,AA,TP,2.4x6.4mm
R-CHIP;820ohm,5%,1/10W,TP,1608
R-METAL OXIDE(S);47ohm,5%,1W,AA,TP,3.3x9
R-CHIP;180ohm,5%,1/4W,TP,3216
R-METAL OXIDE(S);68ohm,5%,1W,AA,TP,3.3x9
SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWITCH-TACT;15V DC,20MA,250GF,12.4X12.4X
HEAT SINK-AMP;HT-XQ100,AL SKIVE,-,-,-,-,
HEAT SINK-TR;HT-DS400,AL EXTR,-,-,-,-,-,
C-CER,CHIP;0.047nF,5%,50V,C0G,1608
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
DIODE-RECTIFIER;1SR154-400,400V,1A,SOD-1
IC-OP AMP;4560,SOP,8P,173MIL,DUAL,100V/m
IC-VIDEO ENCODER;SAA7128AH/V1,QFP,44P,10
INDUCTOR-SMD;220uH,10%,3225
HOLDER-IC;HT-Q20,ABS+GF,-,-,-,-,COMMON P
C-CER,CHIP;2.7nF,10%,50V,X7R,1608
INDUCTOR-AXIAL;33UH,10%,4298
R-CHIP;10ohm,5%,1/10W,TP,1608
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;12ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,1%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
IC-POSI.FIXED REG.;FAN1587AMC33X,TO-263,
IC-POSI.ADJUST REG.;AIC1117ACE,TO-252,3P
IC-AUDIO AMP;TAS5142,PSOP3,36P,15.9x11mm
IC-LED DRIVER;PT6961,SOP,32P,300MIL,-,40
R-CHIP;33Kohm,5%,1/10W,TP,1608
WIRE HARNESS;HT-XQ100,9P,2.5mm,150mm,UL,
C-CER,CHIP;0.12nF,5%,50V,C0G,1608
C-CER,CHIP;0.39nF,10%,50V,X7R,1608
C-AL;330uF,20%,10V,GP,-,8x11.5,2.5m
C-CER,CHIP;0.022nF,5%,50V,C0G,1608
C-CER,CHIP;0.01nF,0.5pF,50V,C0G,1608
CONNECTOR-SOCKET;8P,1R,2.0mm,STRAIGHT,AU
Samsung Electronics
Location no.
JCON3
JJ1
JJ2
JL1
JL5
JR13
JR3
JR7
L1C
L50
MC11
MC21
MC23
MC26
MC31
MC32
MC40
MC43
MC47
MC6
MC66
MC80
MCON1
MCON1
MCON1
MCON2
MCON3
MCON4
MCON5
MCON6
MCON7
MDIC1
MDIC2
MDIC3
MIC1
MIC1
MIC3
MIC4
MIC6
MIC8
MJ4
MQ1
MR15
MR167
MR2
MR29
MR3
MR30
MR35
MR54
MR65
MR66
MR68
MR7
MR8
MR85
MR9
MREG1
NC6
NC7
NC8
NQ3
NR17
OPIC1
OPIC2
OPIC3
OPIC4
PC24
PC7
PC9
PJ1
PS300
PS300
Q1
Q3
R110
R11C
R15
R150
R2SW
R34
R37
R3SW
R46
R58
R8
R80
R8RL
RCN1
Code no.
3711-006098
0603-001164
3722-002454
2703-002238
2703-001254
2007-001044
2007-000029
2007-001167
AH27-00055A
2901-001302
2401-002042
2203-001052
2203-005221
2401-000240
2203-001656
2203-000888
2203-001103
2203-000646
2203-000440
2203-006170
2203-000681
2203-000257
3708-000266
3711-006097
3708-002024
3708-001094
AH39-00867A
3708-002050
AH39-00865A
3708-000303
3708-001051
1003-001450
1003-001508
1201-001842
1204-002361
0801-002683
1107-001505
1204-002450
1103-001334
1105-001535
3708-002023
1203-003526
3301-001069
2007-000084
2007-000882
2007-000100
2007-000695
2007-000093
2007-000962
2007-000694
2007-000643
2007-000799
2011-000816
2007-000052
2007-000539
2007-000118
2007-000109
1203-002425
2401-001020
2401-000048
2401-001164
0501-000010
2007-000087
1001-001170
0802-001007
0802-001025
0801-002518
2401-001975
2401-001364
2401-001102
3722-000143
AH59-01670A
AH59-01690A
0504-000128
0505-000110
2007-001010
2007-002425
2011-000475
2007-000941
2007-000312
2007-000080
2007-000077
2007-000455
2007-000253
2007-000449
2007-001166
2007-000070
2007-000462
3708-001765
Description & Specification Remarks
CONNECTOR-HEADER;NOWALL,16P,2R,2.0mm,STR
OPTIC TRANSMITTER;5V,16Mb/s,-,-,650nm,40
JACK-PIN;6P,SN NI,RD/BU/GN/RD/WT/YL,ANG
INDUCTOR-SMD;1UH,5%,2012
INDUCTOR-SMD;1.8uH,10%,2012
R-CHIP;56ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/8W,TP,2012
R-CHIP;75ohm,5%,1/10W,TP,1608
COIL CHOKE;DBF-1310A,HT-DS600,10uH,-,-,2
FILTER-EMI SMD;20V,0.3A,-,-,2.0x1.2x1.3m
C-AL;220uF,20%,10V,GP,TP,6.3x11,5
C-CER,CHIP;0.56nF,10%,50V,X7R,TP,1608
C-CER,CHIP;15nF,10%,50V,X7R,1608
C-AL;100uF,20%,10V,GP,TP,5x11,5
C-CER,CHIP;0.47nF,5%,50V,NP0,1608
C-CER,CHIP;4.7nF,10%,50V,X7R,1608
C-CER,CHIP;6.8nF,10%,50V,X7R,1608
C-CER,CHIP;0.024NF,5%,50V,C0G,TP,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
C-CER,CHIP;220nF,10%,16V,X7R,1608
C-CER,CHIP;0.027nF,5%,50V,C0G,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
CONNECTOR-FPC/FFC/PIC;32P,1.25MM,STRAIGH
CONNECTOR-HEADER;NOWALL,30P,2R,2.0mm,STR
CONNECTOR-FPC/FFC/PIC;35P,1MM,SMD-S,TIN,
CONNECTOR-FPC/FFC/PIC;13P,1.25MM,STRAIGH
WIRE HARNESS;HT-XQ100,12P,2mm,380mm,UL,1
CONNECTOR-FPC/FFC/PIC;15P,1mm,ANGLE,TIN,
WIRE HARNESS;HT-XQ100,4P,2mm,150mm,UL,4P
CONNECTOR-FPC/FFC/PIC;6P,1.25MM,STRAIGHT
CONNECTOR-FPC/FFC/PIC;13P,1.25MM,ANGLE,S
IC-MOTOR DRIVER;BA5954FM,SOP,28P,300MIL,
IC-MOTOR DRIVER;FAN8082DTF,SOP,8P,200MIL
IC-OP AMP;TL3472CD,SO,TP,8P,-,DUAL,-,PAL
IC-MODULATOR;TAS5508PAG,TQFP,64P,-,PLAST
IC-CMOS LOGIC;74HCT245,TRANSCEIVER,TSSOP
IC-FLASH MEMORY;49BV162AT,16Mbit,1Mx16/2
IC-PAL/NTSC DECODER;ES6697FDF,PQFP,256P,
IC-EEPROM;K524A60X81,1KX8BIT,SOP,8P,5X4M
IC-DRAM;M12L128168A-7T,-,128MBIT,4X2MX
CONNECTOR-FPC/FFC/PIC;6P,1MM,SMD-S,TIN,N
IC-VOL. DETECTOR;KIA7029AP,TO-92,3P,4.58
BEAD-SMD;120ohm,1.6x0.8x0.8mm,200mA,TP,
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7ohm,5%,1/10W,TP,1608
R-CHIP;68Kohm,5%,1/10W,TP,1608
R-CHIP;3.3ohm,5%,1/10W,TP,1608
R-CHIP;20Kohm,5%,1/10W,TP,1608
R-CHIP;5.1Kohm,1%,1/10W,TP,1608
R-CHIP;3.3ohm,5%,1/8W,TP,2012
R-CHIP;270ohm,5%,1/10W,TP,1608
R-CHIP;360ohm,5%,1/10W,TP,1608
R-NET;100ohm,5%,1/16W,L,CHIP,8P,TP,3
R-CHIP;10Kohm,1%,1/10W,TP,1608
R-CHIP;200ohm,5%,1/10W,TP,1608
R-CHIP;390ohm,5%,1/10W,TP,1608
R-CHIP;1Mohm,5%,1/10W,TP,1608
IC-POSI.FIXED REG.;AP1117,SOT-223,3P,138
C-AL;3.3UF,20%,50V,GP,TP,4X7,5
C-AL;47uF,20%,25V,GP,TP,5x11,5
C-AL;33uF,20%,16V,GP,TP,5x11mm,5mm
TR-SMALL SIGNAL;KSC1008,NPN,800mW,TO-92,
R-CHIP;6.8Kohm,5%,1/10W,TP,1608
IC-AUDIO SWITCH;CS8415A-CZZ,RECEIVER&DEC
IC-CMOS LOGIC;74LCX244,BUFFER/LINE DRIVE
IC-CMOS LOGIC;74LCX374,D FILP-FLOP,TSSOP
IC-CMOS LOGIC;74LCX157,2-INPUT MULTIPLEX
C-AL;47uF,20%,16V,GP,TP,5x11mm,5mm
C-AL;470uF,20%,16V,GP,TP,10x12.5,5
C-AL;330uF,20%,16V,GP,TP,8x11.5mm,5
JACK-PHONE;1P(VER),AG,BLK,ANGLE
SPEAKER SYSTEM;PS-XQ100,PS-F/C/RXQ100,-,
SPEAKER SYSTEM;PS-XQ100,PS-WXQ100,-,-,-,
TR-DIGITAL;-,NPN,200MW,22K/22K,SOT-23,TP
FET-SILICON;2N7002,N,60V,115mA,7.5ohm,0.
R-CHIP;51Kohm,5%,1/10W,TP,1608
R-CHIP;1ohm,5%,1/10W,TP,1608
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,32
R-CHIP;47Kohm,5%,1/8W,TP,2012
R-CHIP;10ohm,5%,1/4W,TP,3216
R-CHIP;2Kohm,5%,1/10W,TP,1608
R-CHIP;470ohm,5%,1/10W,TP,1608
R-CHIP;18Kohm,1%,1/10W,TP,1608
R-CHIP;1.5ohm,5%,1/4W,TP,3216
R-CHIP;180ohm,5%,1/8W,TP,2012
R-CHIP;75ohm,5%,1/8W,TP,2012
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;18ohm,5%,1/8W,TP,2012
CONNECTOR-FPC/FFC/PIC;24P,0.5mm,SMD-S,SN
8-1
Location no.
RFC10
RFC15
RFC16
RFC20
RFC26
RFC29
RFC32
RFC44
RFC52
RFD1
RFQ1
RFR15
RFR19
RFR22
RFR23
RFR28
RFR33
RFR34
RFR46
RFR57
RFR70
RIC1
SC21
SC23
SCON1
SCON1
SIC5
SL1
SPK1
SR18
SR19
SR22
SR45
U1
U2
U4
U7
UC1
UC17
UC22
UC3
UC6
UIC1
UQ1
UQ2
UR14
UR2
UR28
UR4
UR51
UR8
USB1
VQ1
VR3
WCON1
WCON1
X1
X1
X1
X2
XD17
X-TAL
ZD1
ZD2
8-2
Code no.
2203-000491
2203-001222
2203-000189
2203-001634
2203-000357
2203-000575
2203-000975
2203-005065
2401-001355
0407-000116
0501-000632
2007-000122
2007-000103
2007-000124
2007-000458
2007-000120
2007-000123
2007-000308
2007-000483
2007-000078
2007-000071
1201-002059
2203-000384
2203-001083
3710-002356
3711-006121
0904-001922
2703-000185
3716-001243
2007-000102
2007-000552
2007-000092
2007-000113
1203-001369
1003-001684
1105-001376
1205-002671
2401-001952
2203-000972
2203-001607
2409-000123
2401-000759
0903-001405
0501-000341
0504-000156
2007-000074
2007-000402
2007-000090
2007-000106
2007-000081
2007-000072
3722-001051
0501-000002
2007-000076
3708-001755
3709-001287
2801-004132
2801-003863
2801-004182
2801-004284
0401-001110
2802-001174
0403-000398
0403-001010
AH81-02111B
AH81-02111C
AH81-02111D
AH81-02177B
AH81-02164J
AH81-02183C
AH81-02183D
AH63-01250A
AH97-01674A
3301-000132
3809-001658
3809-001811
3809-001816
3809-001818
3809-001860
3809-001864
6902-000385
AH39-00257F
AH39-00721A
AH39-40001V
AH40-00090A
AH42-00018A
AH44-00119A
AH59-01643S
AH59-01648A
AH65-00007A
AH68-01852B
AH68-01852C
AH68-01871H
Description & Specification Remarks
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;0.82nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608
C-CER,CHIP;33nF,10%,50V,X7R,1608
C-CER,CHIP;0.15nF,5%,50V,C0G,1608
C-CER,CHIP;220nF,10%,25V,X7R,2012
C-CER,CHIP;47nF,10%,25V,X7R,TP,1608,C-CER,CHIP;1000nF,+80-20%,10V,Y5V,1608
C-AL;470uF,20%,10V,GP,TP,8x11.5mm,5
DIODE-ARRAY;DAP202K,80V,100mA,CK2-3,SOTTR-SMALL SIGNAL;2SB1197K,PNP,200mW,SOT-2
R-CHIP;1.2Kohm,5%,1/10W,TP,1608
R-CHIP;120Kohm,5%,1/10W,TP,1608
R-CHIP;2.2Kohm,5%,1/10W,TP,1608
R-CHIP;18Kohm,5%,1/10W,TP,1608
R-CHIP;680ohm,5%,1/10W,TP,1608
R-CHIP;1.5Kohm,5%,1/10W,TP,1608
R-CHIP;10ohm,5%,1/8W,TP,2012
R-CHIP;1OHM,5%,1/8W,TP,2012
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;22ohm,5%,1/10W,TP,1608
IC-RF AMP;ES6603SF,LQFP,64P,10X10MM,SING
C-CER,CHIP;0.015nF,5%,50V,C0G,1608
C-CER,CHIP;0.005nF,0.1pF,50V,NP0,TP,1608
SOCKET-BOARD TO CABLE;6P,1R,5.08mm,ANGLE
HEADER-BOARD TO BOARD;NOWALL,6P,1R,5.08m
IC-USC;ubi9021,8Bit,QFP,48P,9.0x9.0mm
INDUCTOR-SMD;3.3uH,10%,2012
TERMINAL-BLOCK;-,12P,14mm,-,R-CHIP;100Kohm,5%,1/10W,TP,1608
R-CHIP;20ohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;33ohm,5%,1/10W,TP,1608
IC-VOL. DETECTOR;XC61CN1902,SOT-23,3P,63
IC-DISPLAY DRIVER;FLI2301BD,PQFP,208P,28
IC-DRAM;W986432DH-7,4X512KX32BIT,TSOP(
IC-TRANSMITTER;SII9030CTU80,TQFP,80P,12x
C-AL;4.7uF,20%,50V,GP,TP,5x7mm,5mm
C-CER,CHIP;47nF,10%,16V,X7R,1608
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-EDL;47000uF,4uA,5.5V,-,BK,-,5mm
C-AL;220nF,20%,50V,GP,TP,5x11mm,5mm
IC-MICROCONTROLLER;LC87F5CC8A,8Bit,QFP,1
TR-SMALL SIGNAL;KSC1623-L,NPN,200mW,SOTTR-DIGITAL;KSR2103,PNP,200MW,22K/22K,SOT
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;150ohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;220Kohm,5%,1/10W,TP,1608
R-CHIP;2.7Kohm,5%,1/10W,TP,1608
R-CHIP;47ohm,5%,1/10W,TP,1608
JACK-USB;4P/1C,AU,BLK,ANGLE,A TYPE
TR-SMALL SIGNAL;KSA812,PNP,150MW,SOT-23,
R-CHIP;330ohm,5%,1/10W,TP,1608
CONNECTOR-FPC/FFC/PIC;15P,1mm,STRAIGHT,S
CONNECTOR-CARD SLOT;10P,1.5mm,SMD-A,AU10
CRYSTAL-UNIT;13.5MHZ,10PPM,ATS-49/U,24PF
CRYSTAL-UNIT;48MHz,30ppm,28-AAA,18pF,80o
CRYSTAL-SMD;13.5MHZ,10PPM,28-AAN,24PF,60
CRYSTAL-SMD;27MHZ,10PPM,28-AAN,20PF,30OH
DIODE-SWITCHING;-,80V,100MA,SOD-523,TP
RESONATOR-CERAMIC;10MHZ,0.5%,BK,8X3.5X3M
DIODE-ZENER;UZP8.2B,7.7-8.7V,1000MW,DO-4
DIODE-ZENER;DZP5.6B,5.2-6V,1000mW,DO-41,
A/S PART-FRONT SPEAKER;PS-FXQ100,-,PS-FX
A/S PART-CENTER SPEAKER;PS-CXQ100,-,PS-C
A/S PART-REAR SPEAKER;PS-RXQ100,-,PS-RXQ
SPEAKER;PS-Q20,SPK CORD ? CONNECTOR,FR
SPEAKER;SPEAKER UNIT,6??,11mm,G111A02,
SPEAKER-UNIT;PS-XQ100,WOOFER-FRONT/CENTE
SPEAKER-UNIT;PS-XQ100,WOOFER UNIT-REAR,SHIELD-AMP;HT-XQ100,SPTE,0.3,-,-,-,ASSY-KNOB POWER;ABS,HT-XQ100,CORE-FERRITE;AC,28.8x19.3x7.5mm,1400,290
CABLE-FLAT;30V,80C,70mm,32P,1.25mm,UL289
CABLE-FLAT;30V,80,180mm,15P,1.0mm,UL2069
CABLE-FLAT;30V,80,160,13P,1.25mm,UL2896
CABLE-FLAT;30V,80,300,15P,1.0mm,UL20696
CABLE-FLAT;30V,80,100,35P,1.0mm,AWM20696
CABLE-FLAT;30V,80,100mm,13P,1.25mm,AWM20
BAG PE;LDPE,T0.03,W250,L350,TRP,8,1PE
CBF-POWER CORD;MAX980,-,CP2,250V,2.5A,18
CBF MODULE CABLE;HT-DS1000,19,3000,19,7.
CABLE-AUDIO CABLE;-,-,1P-1P,3000MM,-,-,TUNER-PACK;KST-ML004FA0-52,FM,-,-,-,-,75
ANTENNA-FM;T150S1F-1,-,-,-,-,-,1500??50m
SMPS;HT-XQ100,ORTP-751,AC-DC,500W,1
REMOCON-ASSY;HT-XQ100,EXP,-,-,60,-,-,-,DECK-MECHA DVD;-,VSH-L33D-0818,MAGNET TY
CLAMPER CORE;SB15 UH 16?28?9,FERRITE,-,1
MANUAL USERS;HT-XQ100,SEUK,ENG,-,MOJO,15
MANUAL USERS;HT-XQ100,ELS,FRN/GER/NL,-,M
LABEL CAUTION;HT-XQ100G,ELS,-,-,-,-,-,-,
Location no.
Code no.
AH92-02449A
AH92-02516B
AH92-02517A
AH92-02569A
Description & Specification Remarks
ASSY PCB-AMP;HT-XQ100,5.1CH 500W
ASSY PCB-MAIN;HT-XQ100,PAL USE
ASSY PCB-FRONT;HT-Q100,XQ100(G),ALL BUYE
ASSY PCB-HDMI;HT-XQ100,Q100,,VIDEO OUT
Samsung Electronics
9. Block Diagram
1. MAIN Part
Samsung Electronics
9-1
2. Block Diagram in detail(HDMI)
ENCODER
SAA7128H
Composite
S-Video
RGB
COMPOSITE
Y/C
R(Pr)
G(Y)
Component
M
P
E
G
B(Pb)
Analog Output
SCALER
FLI2301
HDMI Tx
SIL9030
HDMI-Out
13.5MHz
The HDMI the reception it does not
support from HT-XQ100.
HDMI-In
HDMI Rx
SIL9011
SDRAM
W983264DH
9-2
A40X21
EDID
Samsung Electronics
10. Wiring Diagram
Samsung Electronics
10-1
11. PCB Diagram
1. Descriptions of Major PCB Parts
11-1
Samsung Electronics
1-1 MAIN PCB
Samsung Electronics
11-2
1-2 AMP PCB
11-3
Samsung Electronics
1-3 AMP Modulator
Samsung Electronics
11-4
1-4 HDMI PCB (TOP)
11-5
Samsung Electronics
1-5 HDMI PCB (Bottom)
Samsung Electronics
11-6
2. MAIN PCB Check
11-7
Samsung Electronics
Samsung Electronics
11-8
11-9
Samsung Electronics
Samsung Electronics
11-10
11-11
Samsung Electronics
Samsung Electronics
11-12
3. AMP PCB Check
11-13
Samsung Electronics
1) Check if there is a damaged part.
(Short/Damaged IC/Damaged Printed Circuit)
2) Check the connection status of the connector.
3) Check if there is a soldering short on the bottom.
Samsung Electronics
11-14
4. SMPS PCB Check
1) Check the fuse and varistor.
2) Check the AC input.
3) Check the connector cable.
4) Check the connected damaged
part/Damaged Printed
11-15
Samsung Electronics
12. Schematic Diagram
- This Document can not be used without Samsung’s authorization -
1. AMP
Samsung Electronics
12-1
2. FRONT
12-2
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
3. MPEG
Samsung Electronics
- This Document can not be used without Samsung’s authorization -
12-3
4. DSP
12-4
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
5. MICOM
Samsung Electronics
- This Document can not be used without Samsung’s authorization -
12-5
6. FUNCTION
12-6
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
7. HDMI
Samsung Electronics
- This Document can not be used without Samsung’s authorization -
12-7
8. IN-OUT
12-8
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
9. PHONE-USB
Samsung Electronics
- This Document can not be used without Samsung’s authorization -
12-9
10. RF
12-10
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
11. SPK Jack
Samsung Electronics
- This Document can not be used without Samsung’s authorization -
12-11
12. Wireless
12-12
- This Document can not be used without Samsung’s authorization -
Samsung Electronics
13. Circuit Board Description
1. D escription (HT-XQ100)
1. Power
4. Open/Close
7. Volume
2. Disc Tray
5. Function
8. Head Phone Jack
3. LED Display
6. Multi Switch
9. USB Jack
Samsung Electronics
13-1
13-2
1. Speaker Output
4. Component Output
2. WIRELESS-READY
5. Digital7. FM Antenna
3. Ext. Audio Input
6. FM Antenna Connector
4. Video Out
8. HDMI OUT
Samsung Electronics
Samsung Electronics
13-3
2. Function Description (HT-XQ100)
13-4
Samsung Electronics
Samsung Electronics
13-5
1. Definition of Home Theater
What is Home Theater?
Home theater system is the proper combination of audio and video system at home which enable
you to enjoy more dynamic sound and vivid image in a wide screen of movie theater.
This effect can be implemented with wide screen, high quality projector, Dolby digital and DTS
sound effects.
Now you can enjoy surround sound field wieh realistic presence and Dolby digital at your home as if
you are in a movie theater.
As time goes by, home theater system has become recognized as a system that helps listen sound
closer to the original sound rather than video. In this 21st century, most movie and animation films
will be produced for home theater and reproduce sound closer to original sound.
14-1
Samsung Electronics
2. Concept of Sound
What is Sound Range?
People can listen to the sounds with frequency between 200Hz~20.000Hz
As time goes by, home theater system has become recognized as a system that helps listen sound
closer to the original sound rather than video. In this 21st century, most movie and animation films
will be produced for home theater and reproduce sound closer to original sound.
What is Sound Pressure?
* A measure of how well speaker converts electric signal it receives to sound
* Unit of sound pressure is decibel and mainly measures the size of sound at 1 m away after
sending 1 W power from speaker.
❋ High sound pressure doesn't necessary mean good performance
What is Timbre?
* How well the unique sound of musical instrument is expressed
* Better if violin and cello sound are accurately distinguished. Good timbre means high quality.
Samsung Electronics
14-2
2. Concept of Sound
By reproducing standard channels used during soundtrack recording of movie,
it outputs 3 sounds of movie (words / music / sound effects) from 6 different
speakers and provides surround dynamic sound effects so that you can even
feel the direction of sound.
5 channel
A
Center Speaker : Voice ( over 95%)
B
Front Speaker (L/R) : Music Sound
C
Rear Speaker (L/R) : Sound Effect
0.1 channel
D
Subwoofer : Low Sound Effect
* Power amp is embedded in active sub woofer
* Require separate amp since there is no amp in passive sub woofer
❋ No difference in performance of active sub woofer and passive sub woofer
14-3
Samsung Electronics
4. Home Theater Sound Format
Overview
* As home theater has recently penetrated deep into consumer's market in Korea, Dolby digital and
DTS, the sound format for 5.1 channel home theater, are the mainstream in the market.
* Expanded type of 6.1 channel or 7.1 channel are recently released in the market, but there are
not much DVD title that can support expanded type.
1958 1Ch Mono/ 2Ch Stereo
1982 Matrix 3Ch Dolby Surround
1987 Matrix 4Ch Dolby Pro Logic
1995 5.1Ch Dolby Digital
1997 DTS (Digital Theater System)
1999 Matrix 6.1Ch Dolby Digital Sourround EX
Home theater format...
Stereo
Is used in general audio and analog TV and and consists of 2
channels, at front left/right
Dolby Surround
In this sound format, 4 audio channels (Front left / right / center /
surround) are entered in 2 channel and reproduce in 4 channels
through device with Dolby decoder.
Center channel is not completely separated so that it forms virtual
center channel with help of front left / right channel.
Samsung Electronics
14-4
Dolby Prologic
– Provide 4 channels (Front Left/Right/Center/Surround)
– Reinforced from Dolby Surround
① Center channel is completely separated
➁ Separation between channels gets higher
Dolby Digital
– Provide completely separate 5.1 channel
(Front Left/Right, Center, Rear Left/Right, Sub Woofer)
– Main sound format of home theater
– Reinforced from Dolby Prologic
– Rear surround left/right channels give different sound
– Support sub woofer reinforcing Bass
❋ Dolby Digital is also called AC-301
AC-3(Audo-Coding-3) : 3rd digital audio coding Dolby Research Center has
developed.
DTS(Digital Theater System)
– Technology of providing 5.1 channel sound, higher quality than
Dolby Digital
– Home appliance produced to apply system installed at 1,800 theaters throughout the world.
✪ Comparison of DTS and Dolby Digital(DD)
14-5
Samsung Electronics
Dolby Prologic
– Latest technology reproducing music CD recorded in 2 channel,
cassette tape and video tape made in Dolby Prologic into 5.1
channel.
– Surround speaker that makes you feel more natural, deeper and
wider than existing Dolby Prologic.
(Ex-Profound sound adds more realistic presence from 5 speakers
and sub woofer when you watch soccer match.)
DTS (Digital Theater System)
THX (Abbreviation of Tomlison Holman's Experiment)
– THX is not a sound format like a Dolby or DTS, but is a standard of sound. Like standard KS mark
in Korea, THX means good certification in sound effects.
– THX issues certificate when a movie, theater or home theater system satisfy proper standards.
Samsung Electronics
14-6
5. Home Theater Components
Amp / Receiver
Amp: Device of raising output after tuning signal of CD player or DVD into
unique sound timbre
Various Types and Usages of Amplifier
- For Listening to Music ¡æ For Music+ Movie
- ① AV Receiver (Dedicated Lamp for Home Theater) : Preferred by Home Theater mania.
➁ DVD Receiver (DVD Player+ Amp+ Radio Tuner) : Suitable for beginner of Home Theater
- Many A/V companies adopt DVD receiver type for expansion of easy and economic Home Theater
system.
Popular Korean Products
- Popular for those who pursue relatively good sound quality at low price
- Product priced between 400,000 won~600,000 won are popular.
14-7
Samsung Electronics
Popular Foreign Products
– Popular for those who prefer profound sound volume/output(Hi-fi mania, Home Theater mania)
– Products in the range of middle and low price such as Denon, Yamaha, Onkyo (900,000~1.1 million won) are popular.
– There is very expensive product over 10 million won among foreign audio markers such as
Merdian, Mcintosh, Krell.
Type of Amp/Receiver
* Pre Amp
A device that receives, adjusts and sends signal from source devices (tape deck, CD player, radio
tuner, etc.) to power amplifier.
* Power Amp
A device that amplifies the signal from Pre Amp into big sound so that speaker can vibrate.
* Integrated Amp
A device that combines pre-amp and power amp into one.
* Receiver
A device that contains tuner for radio broadcasting and integrated amp.
A/V Receiver
General Amplifier
– Support 2 channels (Left, Right Speaker)
– Mainly reproduce music
– No decoder : cannot cope with various sound formats
A/V Receiver
– Support multi-channel (support 5.1 channel)
Launch products supporting 6.1 channel and 7.1 channel
recently.
– Reproduce music and movie sound realistically
– Has decoder
Can cope with various sound formats such as Dolby Digital.
DTS
– Rich input/output
– Use digital signal type and has no sound
A/V Receiver
A device of implementing home theater more conveniently with
radio and A/V receiver embeded in DVD player.
Samsung Electronics
14-8
How to Select Amp/Receiver
- Select the products that can support both Dolby Digital and DTS since they require both for vivid
sound
- Performance of amp gets better in output(W) but high output is a burden in narrow house.
- Important to match output(W) and capacity(§Ù) of amp and speaker.
- It is advantageous for beginners to purchase DVD receiver type that has amp and radio tuner in
DVD player
- If the budget is tight, it is recommended to continue to upgrade after purchasing a low-priced system.
* Computer will be of no use when it is outdated.
* But, home theater system can be utilized in various ways due to feature of A/V device.
Speaker
Speaker system consists of speaker unit and enclosure.
The type and price range are diverse from expensive big speaker to miniature thin speaker.
Difference between famous speaker and big A/V speaker
- Speaker units are similar(there are a few several speaker unit makers in the world)
- Design, finishing, assembling and tuning process of enclosure are different.
(Prestige speakers are made manually in whole processes of manufacturing)
Famous speaker brands: B&W, JBL, BOSE, Definitve, B&O, etc.
14-9
Samsung Electronics
Speaker Structure
Speaker Unit
- Divided into for high tone, middle tone and low tong
- Tweeter : for high pitch
Smallest unit suitable for feature of high tone reproduction
- Mid-Range : for middle tone
Mid sound reproduction ability is the most critical standard
of speaker evaluation
- Woofer : for low tone
Much bigger size than other speaker unit
Enclosure
- Case of speaker unit
- Enclosure sways sound quality of reproduction
- Low tone is almost acattered without enclosure, and only
high sound tone is heard.
Type of Speaker System
Full Range Speaker
A speaker system producing sound with one speaker unit.
2 Way Type
A speaker system designed using units of 2 woofers for bass and tweeter for high tone.
3 Way Type
Difference between foreign prestige speaker and big A/V maker's speaker.
Samsung Electronics
14-10
ELECTRONICS
© Samsung Electronics Co.,Ltd. MAY. 2005
Printed in Korea
Code no. AH68-01642U
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement