Genua genucard Quickstart Guide

PDF

Dokument

Annons

genucard

Quickstart Guide

This Quickstart Guide provides a short overview of the genucard Mobile Security Device's functionality, and how to use it.

Document version: 14.09.2016

genua GmbH

Domagkstrasse 7

85551 Kirchheim/Munich

Germany www.genua.de

Content

What is the genucard?

Scope of Delivery

Ports

Installing the Driver

Installing genucard

Web GUI

Internet Connection

VPN Connection genucard Client for Windows

Installation genucard Client for Windows genucard Client Login genucard Client - Icons genucard Client - Menu genucard Client - Connections genucard Client - Hotspot Login genucard Client - Create/Edit Profiles genucard Client - Status genucard Credential Providers

Power Supply

LAN and DSL/PPPoE

Internet Profile LAN

Internet Profile DSL/PPPoE

Using WiFi

Internet Profile WiFi

Using USB Devices

Internet Profile 3G/USB Modem

USB Update

Using Smartcard

Technical Specifications

LED Signals

What is the genucard?

The genucard Mobile Security Device enables secure, fast, and easy connections from your laptop/PC via the Internet to your company network.

genucard is equipped with a firewall to handle all connections, as well as a VPN gateway to strongly encrypt data communication.

Scope of delivery

1 x genucard

2 x USB cable (Micro

USB to Type A)

Ports

1 2 3 4 5

Reset button

USB port (modems, Bluetooth sticks, software update and installation)

Network interface

Micro USB data connection to the laptop

Micro USB power socket

3G SIM card port

Smartcard port

Attachment for external 3G antenna

Attachment for external WiFi antenna

Installing the Driver

Windows Vista, 7, 8, 8.1 and Windows 10:

The driver already is included in the operating system.

genucard is detected as an RNDIS Internet Sharing Device

Windows XP:

Windows XP also provides RNDIS drivers. However, current version of ActiveSync needs to be installed.

Linux:

Current Linux kernels come with a driver for genucard

Mac OS X:

Presently, no driver is available for Mac OS X.

Installing genucard

Insert the USB stick with the installation file in USB port on the genucard. (This step is not needed if the system administrator already has performed the installation.)

Connect the genucard USB interface to the laptop with the included USB cable.

genucard will boot automatically and install.

The installation is done once the System LED turns steady green (see page 42/43 for LED signals).

genucard now can be accessed via the Web GUI.

Web GUI

To use genucard, log in to the Web GUI by entering the following URL in your Web browser: http://my.genucard

Enter your Loginname and Password, and click on

Login.

The genucard GUI will now let you establish Internet and VPN connections.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Internet Connection

To establish an Internet connection via genucard, first choose the correct Internet profile in the dropdown menu

Internet,Select Internet connection.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click on the button Connect.

A green check mark will be displayed in the status field once the Internet connection has been established.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click on the button Disconnect to terminate the connection.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

VPN Connection

First check if there is an established Internet connection via the genucard.

To establish a VPN connection via genucard, choose the correct VPN from the dropdown menu VPN,Select VPN

connection.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Click on the button Connect.

A green check mark will be displayed in the status field once the VPN connection has been established.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click on the button Disconnect to terminate the VPN connection.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

genucard Client for Windows

In addition to the genucard GUI, the genucard Windows Client

(Windows app) is available for Windows XP, Vista, 7, 8, 8.1 and Windows 10.

The app can be attached to the task bar, and offers a quick overview of the genucard status and connections.

It also can initialize/terminate Internet and VPN connections for a previously configured genucard.

The genucard Windows Client can be downloaded from the support area on the genua website: https://www.genua.de/support/downloads/release-downloads/genucard.html

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Installing the genucard Client for Windows

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

genucard Client Login

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

genucard Client - Icons

The genucard was not recognized by the system, or is not connected.

Click the genucard client icon to open the menu:

The genucard was recognized by the system and is ready.

An Internet connection has been established.

A VPN connection has been established.

A problem was detected.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

genucard Client Menu

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

genucard Client - Connections

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

genucard Client - Hotspot Login

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

genucard Client - Edit/Modify Profiles

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

genucard Client - Status

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

genucard Credential Provider

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Now insert the genucard. It will be up and running within 30 seconds, and you can log in with your genucard Loginname and

Password or Smardcard PIN.

First check if the correct installation file for your system type

(32 or 64bit) was downloaded.

To determine the system type:

Click Start

Right click Computer

Properties

System Type

First run the installation file genucard-setup.

This will start the setup wizard and display the intended system type in the title bar (32 bit -> "x86", 64 bit -> "x64").

If the type matches, click on Next.

In the next window, select the installation target and options.

To initialize a connection via genucard before Windows login, select the option genucard Credential Provider.

Deactivate Fast User-Switching to prevent multiple user logins at the same time.

Then click Next.

If machine authentication is required (to restrict a genucard to specific systems), select the respective key file and click Next.

Click the genucard client icon to open the menu:

Webinterface: Opens the default browser with the genucard

Web interface, as described on page 7ff.

Change smartcard PIN: Opens a window to edit the smartcard PIN if a smartcard is used.

Status: Status information about the current connection, and options for establishing/closing Internet and

VPN

Protocol: Displays genucard client protocol information.

Notifications: Opens the genucard client message tab.

Profiles: Displays available profiles and any modification

options.

About: Displays genucard client information.

Close: Closes the genucard client.

The Internet field in the Status tab lists available preconfigured profiles for Internet connections. Select a profile and click

Connect. Once a connection is established, a VPN can be initialized.

To do so, select a VPN from the predefined list and click Connect.

To log in to a hotspot, select the Internet connection option Open

WiFi in the Status tab.

This will open a hotspot login dialog.

If you need an individual profile, and the administrator has activated permission to do so, you can create one in the Profiles tab.

Click on Create Profile to start a wizard for the various connection options.

The icons on the Status tab show the status of machine authentication, connection to the genucard, as well as the Internet and VPN connections.

Hover over over the icons with the mouse for more information.

If a connection is required before Windows login (e.g. for Active

Directory authentication) the Credential Provider must be installed when setting up the genucard.

See Installation genucard Client for Windows.

Subsequently, network authentication can selected at Windows login. (See arrow.)

First log in at the genucard.

Enter your genucard Username (german: Benutzername) and

Password (german: Kennwort)

Click Install to start the setup, then Yes in the user account window.

Finish the installation by clicking Finish.

In the next dialog, select the connection (german: Verbindung) to access the target network.

Once the connection has been established, you can log on

Windows as usual.

Power Supply

Important:

Be sure to have adequate power before using WiFi or 3G.

To do so, attach the Data and Power USB connections to your laptop.

4 5

Alternatively, the optional power supply can be plugged into the power connection.

See page 42/43 for LED signals.

LAN and DSL/PPPoE

The genucard already is attached to your laptop.

Insert the LAN cable into the genucard port.

Internet Profile LAN

To set up a LAN Internet profile, the following information is necessary (unless DHCP is used): genucard IP address and prefix (e.g. 192.168.0.101/24)

Optionally:

Default IPv4 gateway

DNS server

If specified by the system administrator:

MTU (Maximum Transmission Unit)

Internet Profile DSL/PPPoE

To set up a DSL/PPPoE Internet profile, the following information is necessary:

If required by your Internet provider:

Username

Password

If specified by the system administrator:

MTU (Maximum Transmission Unit)

Using WiFi

To use WiFi, the genucard must be attached to your laptop with both Micro USB cables (Power and Data).

Internet Profile WiFi

To set up a WiFi Internet profile, the following information is necessary:

If you intend to use encrypted WiFi:

Password

If the WiFi network cannot not be automatically detected:

SSID

If specified by the system administrator:

MTU (Maximum Transmission Unit)

If an additional login (WISPr) for a WiFi Hotspot is required, you will be prompted for the username and password when establishing the Internet connection.

Using USB Devices

genucard also supports other devices provided by genua, such as the Bluetooth stick.

Attach the genucard Data and Power USB interfaces to your laptop using the provided Micro USB cables.

4 5

Insert the USB device in the genucard USB port.

Internet Profile 3G/USB Modem

To set up a USB Internet profile, the following information is necessary:

If the mobile phone is attached via USB:

No further information needed

To use an attached 3G module:

Username

Password

Phone Number

3G (integrated modem):

SIM PIN

Access Point Name

If specified by the system administrator:

MTU (Maximum Transmission Unit)

USB Update

The genucard is already connected to your laptop and booted.

Insert the USB stick with the update configuration file in the genucard.

The update will start automatically. During update, the

System LED will blink red and green.

Do not remove genucard from the laptop during the update! This can cause severe damage.

The update is done once the System LED turns a steady green. genucard will reboot if necessary.

Using Smartcard

genucard can be used with a Smartcard to securely store private keys.

Remove the small chip card (ID-000 format) from the large chip card (ID-1 format) and insert it in the genucard

Smartcard slot:

ID-1 ID-000

At login, enter your PIN in the GUI field Password. After your first login, you must change the PIN. To do so, click on the key icon in the lower righthand corner of the GUI.

Successively entering an incorrect PIN three times

will lock the genucard! You will need the PUK to unlock it by executing

"# smartcard-change-pin -u PUK PIN"

on the commandline.

The Web GUI will display an error message if an incorrect PIN is entered. The message that the genucard has been locked will be displayed after three or more incorrect attempts, and then entering the correct PIN.

Technical Specifications

CPU:

Memory:

Ethernet:

USB Host:

SIM Slot:

PowerPC: Freescale MPC5121e

256MB SDRAM + 128MB NAND Flash

1x 10/100 MBit (RJ45)

1x Typ A (Flash Firmware, ext. modem)

SIM card adapter ID-000 format

USB Power: 1x Micro B

USB Data:

Smartcard-

Slot:

LED:

1x Micro B

Smartcard (SIM format, Key storage)

8 sets red/orange/green LEDs

Technical Specifications

Ext. antenna attachments:

Case measurements:

1x 3G, 1x WiFi

11 x 11 x 2 cm

Temperature range: 0-50 ℃ (during operation)

-20-70 ℃ (during storage)

Humidity:

20-80% operation)

10-80% storage)

Altitude above sea level: max. 2000m (during operation)

max.

LED Signals

Power LED

orange blinking: Power status being checked

orange steady: Power available for basic functions

green steady: Power available for all functions

System LED

green steady:

red blinking: genucard active

Bootloader being loaded

green (slow) blinking: Configuration being loaded

red/green blinking: Configuration/software update being

applied.

Do not remove genucard from laptop while updating!

INTERNET LED

green blinking: Network connection being established

orange blinking: WISPr authentication

green steady: Internet connection established

red blinking: Connection attempt failed

VPN LED

green blinking: green steady:

Connection being established

VPN connection established

USB

USB LED

green steady: USB connected

UMTS

WLAN, 3G, LAN

green steady: green blinking:

Interface is active

Data is being exchanged

All LEDs

red blinking: genucard is not configured

www.genua.de

Hej! Jag är en AI-chattbot som är särskilt tränad för att hjälpa dig med Genua genucard Snabbstartsguide. Jag har noggrant granskat dokumentet och kan hjälpa dig att hitta den exakta information du behöver eller förklara innehållet på ett tydligt och enkelt sätt. Oavsett om du letar efter vägledning om specifika funktioner, felsökningssteg eller allmän användning, tveka inte att ställa dina frågor. Ju mer detaljer du ger om dina bekymmer eller behov, desto mer exakt och effektivt kan jag hjälpa dig!

Assistent skriver

Assistenten är inte tillgänglig. Försök igen senare.

Det ser ut som att du har kommit till ett dokument som är skrivet på flera språk, inklusive ett som inte är ditt modersmål. Du kan använda följande länkar för att tillfälligt dölja sidor utan det språk du föredrar.