LG 47LA6200 46.9" Full HD 3D compatibility Smart TV Wi-Fi Grey LED TV

LG 47LA6200 46.9" Full HD 3D compatibility Smart TV Wi-Fi Grey LED TV
OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
42LA6200
47LA6200
50LA6200
55LA6200
60LA6200
42LA6205
47LA6205
50LA6205
55LA6205
60LA6205
P/NO : MFL67711002 (1302-REV01)
www.lg.com
2
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your
product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
yyDo not use this apparatus near water.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The
lightning flash with arrowhead symbol,
WARNING/CAUTION
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
yyClean only with a dry cloth.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
ENGLISH
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death.
CAUTION
If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
yyDo not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
yyDo not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
yyDo not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ by
country).
The note helps you understand and use the product
safely. Please read the note carefully before using
the product.
Power Supply
WARNING: This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
Short-circuit
the panel with a hand or
yyDo not press strongly upon
Breaker
a sharp object such as a nail, pencil or pen, or make
a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
yyProtect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
yyOnly use attachments/accessories specified by the
manufacturer.
yyUse only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
yyUnplug this apparatus during lightning storms or
when unused for long periods of time.
Short-circuit
Breaker
yyCAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner’s manual to be certain. Do
not connect too many appliances to the same AC
power outlet as this could result in fire or electric
shock. Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part
by an authorized service. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance. Do
notSupply
move the TV with the power cord plugged in.
Power
Do not use a damaged or loose power cord. Be sure
do grasp the plug when unplugging the power cord.
Do not pull on the power cord to unplug the TV.
Power Supply
Power Supply
yyRefer all servicing to qualified service personnel.
yyWarning - To reduce the risk of fire or electrical
Servicing is required when the apparatus has been
shock, do not expose this product to rain, moisture
damaged in any way, such as power-supply cord or
or other liquids. Do not touch the TV with wet
plug is damaged, liquid has been spilled or objects
hands.
Power
Supply Do not install this product near flammable
have fallen into the apparatus, the apparatus has Short-circuit
objects
such as gasoline or candles, or expose the
been exposed to rain or moisture, does not operate Breaker
TV to direct air conditioning.
normally, or has been dropped.
yyDo not stick metal objects or any other conductive
material into the power cord. Do not touch the end
of the power cord while it is plugged in.
yyKeep the packing anti-moisture material or vinyl
packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit
the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach of
children.
yyDo not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Power Supply
Power Supply
Power Supply
ENGLISH
Short-circuit
Breaker
Short-circuit
Breaker
3
4
IMPORTANT SAFETY INSTRUCTIONS
yyGrounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not
try to ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Power Supply
ENGLISH
yyAs long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
yyDo not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.
yyOutdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can come in contact with such power
lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
NEC: National Electrical Code (NEC Art 250, Part H)
yyCleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners or benzine.
yyMoving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press or put
stress on the front panel of the TV.
yyVentilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other
materials while plugged. Do not install in excessively
dusty places.
yyIf you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
yyKeep the product away from direct sunlight.
yyNever touch this apparatus or antenna during a
thunder or lightning storm.
yyWhen mounting a TV on the wall, make sure not
to install the TV by hanging the power and signal
cables on the back of the TV.
yyDo not allow an impact shock or any objects to fall
into the product, and do not drop anything onto the
screen.
yyDisconnecting the Main Power
The power outlet used with this device must remain
easily accessible.
yyStore the accessories (battery, etc.) in a safe
location out of the reach of children.
yyThis apparatus use batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact your
local authorities for disposal or recycling information.
yyDo not dispose of batteries in a fire.
yyDo not short circuit, disassemble or allow the
batteries to overheat.
IMPORTANT SAFETY INSTRUCTIONS
Preventing “Image burn” or “Burn-in” on your TV
screen
For USA and Canada
FCC NOTICE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
yyIf a fixed image displays on the TV screen for a long
period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is
“image burn” or “burn-in” and not covered by the
warranty.
yyIf the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on the
letterboxed area of the screen.
yyAvoid displaying a fixed image on the TV screen for
a long period of time (2 or more hours for LCD, 1
or more hours for the Plasma TV) to prevent image
burn.
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
ENGLISH
yyDot Defect
The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by
plastic thermal contraction due to temperature and
humidity. This noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level
noise is generated from a high-speed switching
circuit, which supplies a large amount of current
to operate a product. It varies depending on the
product.
This generated sound does not affect the
performance and reliability of the product.
yyTake care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or cause
defects in the product.
yyIf the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV. Some minute dot
defects may be visible on the screen, appearing as
tiny red, green, or blue spots. However, they have
no adverse effect on the TV’s performance. Avoid
touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary distortion effects on the
screen.
5
6
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging
(For 3D models)
WARNING
Viewing Environment
yyViewing Time
- When watching 3D content, take 5 - 15 minute
breaks every hour. Viewing 3D content for a long
period of time may cause headache, dizziness,
fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
ENGLISH
yySome users may experience a seizure or other
abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D Content.
yyDo not watch 3D videos if you feel nausea, are
pregnant and/ or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure
disease, etc.
yy3D Content are not recommended to those who
suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be
experienced.
yyIf you have strabismus (cross-eyed), amblyopia
(weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue due to
double images. It is advised to take frequent breaks
than the average adult.
yyIf your eyesight varies between your right and left
eye, revise your eyesight prior to watching 3D
Content.
CAUTION
Viewing Environment
yyViewing Distance
- Maintain a distance of at least twice the screen
diagonal length when watching 3D Content. If
you feel discomfort in viewing 3D Content, move
further away from the TV.
Viewing Age
yyInfants / Children
- Usage/ Viewing 3D Content for children under the
age of 5 are prohibited.
- Children under the age of 10 may overreact and
become overly excited because their vision is in
development (for example: trying to touch the
screen or trying to jump into it. Special monitoring
and extra attention is required for children watching
3D Content.
- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yyTeenagers
- Teenagers under the age of 19 may be stimulated
to light coming from 3D videos. Advise them not
to watch 3D videos for a long time when they are
tired.
yyElderly
- The elderly may perceive less of a 3D effect than
the youth. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
Symptoms which require discontinuation or
refraining from watching 3D contents
yyDo not watch 3D Content when you feel fatigue
from lack of sleep, overwork or drinking.
yyWhen these symptoms are experienced, stop using/
watching 3D Content and get enough rest until the
symptom subsides.
- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness,
discomfort, double image, visual inconvenience or
fatigue.
yyMake sure to use LG 3D glasses. Otherwise, you
may not be able to view 3D videos properly.
yyDo not use 3D glasses instead of your normal
glasses, sunglasses or protective goggles.
yyUsing modified 3D glasses may cause eye strain or
image distortion.
yyDo not keep your 3D glasses in extremely high or
low temperatures. It will cause deformation.
yyThe 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of cloth
when wiping the lenses. Do not scratch the lenses
of the 3D glasses with sharp objects or clean/wipe
them with chemicals.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
7
LICENSES
Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol
together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit ‘http://opensource.lge.com’.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping and handling) upon email request to ‘[email protected]’. This offer
is valid for three (3) years from the date on which you purchased the product.
ENGLISH
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
8
TABLE OF CONTENTS
TABLE OF CONTENTS
ENGLISH
2
IMPORTANT SAFETY INSTRUCTIONS
6
Viewing 3D Imaging (For 3D models)
7
LICENSES
7
OPEN SOURCE SOFTWARE NOTICE
8
TABLE OF CONTENTS
9
INSTALLATION PROCEDURE
9
ASSEMBLING AND PREPARING
33 USING THE USER GUIDE
9
11
12
13
14
14
15
17
17
Unpacking
Optional Extras
Parts and Buttons
Lifting and moving the TV
Setting up the TV
-Attaching the stand
-Mounting on a table
-Mounting on a wall
-Tidying cables
18
MAKING CONNECTIONS
18
19
Connecting to an antenna or cable
Connecting to a HD receiver, DVD Player, or
VCR
-HDMI Connection
-DVI to HDMI Connection
-Connecting to a mobile phone
-Component Connection
-Composite Connection
Connecting to a PC
-HDMI Connection or DVI to HDMI
Connection
Connecting to an Audio System
-Digital Optical Audio Connection
Connecting Headphones
Connecting a USB Drive
19
20
21
22
23
24
24
26
26
27
27
28 REMOTE CONTROL
30 MAGIC REMOTE CONTROL
FUNCTIONS
31
31
31
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
32
WATCHING TV
32
Turning the TV on for the first time
34 SPECIFICATIONS
37
EXTERNAL CONTROL DEVICE SETUP
38 MAINTENANCE
38
38
38
Cleaning Your TV
-Screen, frame, cabinet and stand
-Power cord
38 TROUBLESHOOTING
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
yyThe available menus and options may differ from
the input source or product model that you are
using.
yyNew features may be added to this TV in the
future.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
9
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
4
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product
functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick
and 18 mm (0.7 inches) width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s
USB port.
B
A
*A
*B
B
A
10 mm (0.39 inches)
18 mm (0.7 inches)
ENGLISH
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.
10
ASSEMBLING AND PREPARING
ENGLISH
(For LA6200 series)
(For LA6205 series)
Remote Control, Batteries (AAA)
(See p. 28)
Magic Remote Control,
Batteries (AA)
(See p. 30)
Owner’s Manual
Power Cord
Stand Body, Stand Base
(See p. 14)
Stand Screws
8 EA, M4 x 14
(See p. 14)
(For 42/47/50LA6200,
42/47/50LA6205)
(For 42LA6200, 42LA6205)
(For 47/50LA6200, 47/50LA6205)
Desk-mount Cable
2 EA
(See p. 15)
Bracket Screw
2 EA, M4 x 8
(See p. 15)
Bracket Screw
2 EA, P4 x 8
(See p. 15)
Cable Holder
(See p. 17)
Cinema 3D Glasses
The number of 3D glasses may
differ depending on the model
or country.
(For 42/47/50LA6200,
42/47/50LA6205)
Desk-mount Screw
2 EA
(See p. 15)
ASSEMBLING AND PREPARING
11
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AN-MR400
Magic Remote
AG-F***
Cinema 3D Glasses. All glasses
with the Cinema 3D logo are
supported by the 3D TVs in this
manual.
AG-F**DP
Dual Play Glasses. For playing
head-to-head games. Converts
most 2 player split-screen
games to full screen.
Tag On
LG Audio Device
Tag On
Near Field Communication (NFC)
tag.
ENGLISH
AN-VC4**
Video Call Camera
12
ASSEMBLING AND PREPARING
Parts and Buttons
Screen
OK
SETTINGS
INPUT
ENGLISH
Buttons
Speakers
Power Indicator
Remote control Sensor and
Intelligent Sensor1
Button
Description
/
(^ / v)
Scrolls through the saved channels.
/
(+ / -)
Adjusts the volume level.
(OK ⊙)
Selects the highlighted menu option or confirms an input.
(SETTINGS)
Accesses the main menus, or saves your input and exits the menus.
(INPUT
Changes the input source.
(ꔰ / I)
)
Turns the power on or off.
1 Intelligent Sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING
13
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged and for
safe transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as this may
result in damage to the screen.
yyIt is recommended to move the TV in the box or
packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the
power cord and all cables.
yyWhen holding the TV, the screen should face away
from you to avoid damage.
yyHold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part, speaker,
or speaker grill area.
ENGLISH
yyWhen transporting a large TV, there should be at
least 2 people.
yyWhen transporting the TV by hand, hold the TV as
shown in the following illustration.
yyWhen transporting the TV, do not expose the TV to
jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the left
or right.
14
ASSEMBLING AND PREPARING
Setting up the TV
The TV can be mounted to a wall or the stand can be attached if the TV will be positioned on an entertainment center or
stand.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to
protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward
after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
1
3
4 EA
M4 x 14
ENGLISH
Stand Body
Front
4 EA
M4 x 14
Stand Base
2
ASSEMBLING AND PREPARING
Mounting on a table
1
15
NOTE
Lift and tilt the TV into its upright position on a table.
yyWhen adjusting the angle of the TV, watch out for
your fingers.
»»Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
- Leave a 10 cm (4 inch) (minimum) space from the
wall for proper ventilation.
10 cm (4 inc
hes)
10 cm
10 cm
10 cm
Front
Rear
Securing the TV to a table
2
Connect the power cord to a wall outlet.
(For 42/47/50LA6200, 42/47/50LA6205)
CAUTION
yyDo not place the TV near or on sources of heat, as
this may result in fire or other damage.
Swivel 15 degrees to the left or right and adjust the
angle of the TV to suit your view.
15˚
1
Connect the Desk-mount Cables to the Stand Base
using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using the Deskmount Screws.
3
Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
15˚

(For 42LA****)
M4 X 8
2 EA
2 EA
(For 47/50LA****)
P4 X 8
2 EA
WARNING
yyTo prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
ENGLISH
Adjusting the angle of the TV to suit view
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
16
ASSEMBLING AND PREPARING
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is located at
the rear of the TV.
For more information of installation and using, refer
to the manual provided with the Kensington security
system or visit http://www.kensington.com.
Securing the TV to a wall (optional)
(Depending on model)
Connect the Kensington security system cable between
the TV and a table.
NOTE
ENGLISH
yyThe Kensington security system is optional. You
can obtain additional accessories from your local
dealer.
1
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
yyMake sure that children do not climb on or hang on
the TV.
NOTE
yyUse a platform or cabinet that is strong and large
enough to support the TV securely.
yyBrackets, bolts and ropes are optional. You can
obtain additional accessories from your local dealer.
ASSEMBLING AND PREPARING
17
Mounting on a wall
CAUTION
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket at the
rear of the TV. Install the wall mount bracket on a solid
wall perpendicular to the floor. If you are attaching the
TV to other building materials, please contact qualified
personnel to install the wall mount. Detailed instructions
will be included with the wall mount. We recommend
that you use an LG brand wall mount.
yyDisconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
yyIf you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
yyDo not over tighten the screws as this may cause
damage to the TV and void your warranty.
yyUse the screws and wall mounts that meet the
VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered by
the warranty.
NOTE
10 cm (4 inches)
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that meet the
VESA standard. Standard dimensions for the wall mount
kits are described in the following table.
Model
VESA (A x B)
42LA6200
42LA6205
47/50/55/60LA6200
47/50/55/60LA6205
Tidying cables
200 x 200
400 x 400
1
Gather and bind the cables with the cable
management.
2
Gather and bind the cables with the cable holder on
the back of the TV.
A
B
Standard screw
M6
M6
Number of screws 4
4
Wall mount
bracket (optional)
LSW430B
LSW230B
Cable Holder
Cable Management
CAUTION
yyDo not move the TV by holding the cable holder
and cable management, as the cable holders may
break, and injuries and damage to the TV may
occur.
ENGLISH
yyUse the screws that are listed on the VESA
standard screw specifications.
yyThe wall mount kit includes an installation manual
and necessary parts.
yyThe wall mount bracket is optional. You can obtain
additional accessories from your local dealer.
yyThe length of screws may differ depending on the
wall mount. Make sure to use the proper length.
yyFor more information, refer to the manual supplied
with the wall mount.
18
MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs,
audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external
device’s connection, refer to the manual provided with each device.
NOTE
yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the
TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the
connected device.
yyThe external device connections shown may differ slightly from illustrations in this manual.
yyConnect external devices to the TV regardless of the order of the TV port.
yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.
yyRefer to the external equipment’s manual for operating instructions.
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from
the actual items and a RF cable is optional.
VHF Antenna
ENGLISH
UHF Antenna
Antenna
ANTENNA/
CABLE IN
Coaxial (75Ω)
(*Not Provided)
Terminal
CAUTION
yyMake sure not to bend the copper wire of the RF
cable.
Copper wire
yyComplete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
NOTE
yyUse a signal splitter to use more than 2 TVs.
yyVisit ‘http://lgknowledgebase.com’ for more
information about the antenna and cable
connection. Search for antenna.
yyDTV Audio Supported Codec: MPEG, Dolby Digital.
MAKING CONNECTIONS
19
Connecting to a HD receiver, DVD Player, or VCR
Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV
with the HDMI cable as shown in the following illustration.
NOTE
yyUse the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.
yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yyHDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/192k), DTS.
HDMI
IN 1(ARC)
IN 2
(*Not Provided)
DVD / Blu-Ray / HD Cable Box / HD STB
ARC (Audio Return Channel)
yyWhen connected with a high-speed HDMI cable,
digital audio can be sent to a compactible device
without an additional optical audio cable.
yyARC is only supported on the HDMI input 1 (ARC)
port. An external audio device that supports ARC
should be connected to HDMI 1 if you wish to use
ARC
ENGLISH
IN 3(MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
20
MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the
DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
NOTE
yyWhen using the HDMI/DVI cable, Single link is only supported.
IN 3(MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
PC-AUDIO IN
ENGLISH
VIDEO/ Y
PB
PR
L/MONO
IN 1(ARC)
IN 2
(*Not Provided)
AUDIO R
COMPONENT IN / AV IN
RED
WHITE
(*Not Provided)
AUDIO OUT
DVI OUT
DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS
21
Connecting to a mobile phone
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to
television sets.
NOTE
IN 3(MHL)
yyConnect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV.
yyThis only works for the MHL-enabled phone.
yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone.
yyAn MHL passive cable is needed to connect the TV and a mobile phone.
yyRemove the MHL cable from the TV when:
- the MHL function is disabled.
- your mobile device is fully charged in standby mode.
MHL Cable
(*Not Provided)
Mobile phone
ENGLISH
22
MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with
a component cable as shown in the following illustration.
NOTE
yyIf cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.
yyCheck to ensure the cables are matched with the corresponding color connection.
PC-AUDIO IN
VIDEO/ Y
PR
PB
L/MONO
AUDIO R
COMPONENT IN / AV IN
RED
WHITE
RED
BLUE
GREEN
ENGLISH
(*Not Provided)
(*Not Provided)
VIDEO
RED
WHITE
RED
BLUE
GREEN
L
R
AUDIO
DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS
23
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with
the composite cable as shown in the following illustration.
NOTE
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
yyCheck to ensure the cables are matched with the corresponding color connection.
PC-AUDIO IN
VIDEO/ Y
PB
PR
L/MONO
AUDIO
OR
COMPONENT IN / AV IN
(*Not Provided)
RED
WHITE
YELLOW
L (MONO) AUDIO R
VCR / DVD / Blu-Ray / HD Cable Box
ENGLISH
RED
WHITE
YELLOW
VIDEO
24
MAKING CONNECTIONS
Connecting to a PC
NOTE
yyIt is recommended to use an HDMI connection for the best image quality.
yyDepending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise
is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE menu until the picture is clear.
yyThe synchronization input form for Horizontal and Vertical frequencies is separate.
yyDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen
properly.
yyIf you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the
next page.
yyWhen using the HDMI/DVI cable, Single link is only supported.
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HDMI Connection
IN 3(MHL)
HDMI
IN 2
(*Not Provided)
PC
PC-AUDIO IN
IN 2
IN 3(MHL)
IN 1(ARC)
ENGLISH
Choose any HDMI input port to connect.
It does not matter which port you use.
IN 2
IN 1(ARC)
MAKING CONNECTIONS
25
Method B: DVI to HDMI Connection
IN 3(MHL)
Choose any HDMI input port to connect.
It does not matter which port you use.
VIDEO/ Y
PB
PR
L/MONO
AUDIO R
COMPONENT IN / AV IN
IN 1(ARC)
PC-AUDIO IN
IN 2
(*Not Provided)
RED
ENGLISH
WHITE
(*Not Provided)
AUDIO OUT
DVI OUT
PC
26
MAKING CONNECTIONS
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the
optical audio cable as shown in the following illustration.
NOTE
yyDo not look into the optical output port. Looking at the laser beam may damage your vision.
yyAudio with ACP (Audio Copy Protection) function may block digital audio output.
ENGLISH
OPTICAL
DIGITAL
AUDIO OUT
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
MAKING CONNECTIONS
27
Connecting Headphones
You listen to the sound using headphones.
NOTE
yyAUDIO menu options are disabled when headphones are connected.
yyWhen changing AV MODE with headphones connected, the change is applied to video but not to audio.
yyOptical Digital Audio Out is not available when headphones are connected.
yyHeadphone impedance: 16 Ω
yyMax audio output: 10 mW to 15 mW
yyHeadphone jack size: 0.35 cm (0.13 inches)
Headphone
H/P OUT
(*Not Provided)
Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the
TV and access the Smart Share menu to use various multimedia files.
NOTE
yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the
USB port on the TV directly.
Choose any USB input port to connect.
It does not matter which port you use.
USB IN 3
(*Not Provided)
USB IN 1
USB IN 2
USB
USB Hub
ENGLISH
Connecting a USB Drive
28
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this
manual carefully and use the TV correctly. To install batteries, open the battery cover,
replace batteries (1.5 V AAA) matching the
and
ends to the label inside the compartment,
and close the battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
For LA6200 series
(POWER)
Turns the TV on or off.
RATIO
(User Guide)
Sees user-guide.
INPUT
RATIO
Resizes an image.
TV
ENGLISH
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
INPUT
Changes the input source. Turns the TV on if it is off.
TV
Returns to the last TV channel.
Number button
Enters numbers.
FAV
CH
VOL
MUTE
P
A
G
E
LIST
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Tunes to the last channel viewed.
Q.MENU
INFO
SMART
MY APPS
VOL
Adjusts the volume level.
FAV
Accesses your favorite channel list.
OK
Used for viewing 3D video.
BACK
AV MODE EXIT
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
SLEEP
SETTINGS
MUTE
Mutes all sounds.
REMOTE CONTROL
RATIO
INPUT
TV
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
INFO
Shows information on the current program.
SMART
Accesses the Smart Home menu.
MY APPS
Shows the list of Apps.
Q.MENU
Accesses the quick menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK ꔉ
Selects menus or options and confirms your input.
FAV
CH
VOL
MUTE
Q.MENU
SMART
P
A
G
E
ꕣ BACK
Returns to the previous level.
AV MODE
Selects an AV mode.
EXIT
Clears all on-screen displays and returns to TV viewing.
MY APPS
OK
BACK
AV MODE EXIT
Color buttons
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Control buttons ( , , ,
, )
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
SLEEP
Sets the sleep timer.
SLEEP
SETTINGS
SETTINGS
Accesses the main menu.
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
ENGLISH
INFO
29
30
MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic remote control battery is low. Change the battery.” is displayed,
replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA)
matching
and
ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control at the remote control sensor on the TV. To remove the batteries,
perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
For LA6205 series
Pointer (RF transmitter)
Wheel (OK)
ENGLISH
Selects menus or options and confirms
your input.
Scrolls through the saved channels.
If you press the navigation button while
moving the pointer on the screen, the
pointer disappears, and the Magic remote
control works as a regular remote control.
To display the pointer again, shake the
Magic remote control from side to side.
BACK
Returns to the previous screen.
(POWER)
Turns the TV on or off.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
BACK
SMART
SMART
Accesses the Smart Home menu.
Voice recognition
-This is a beta version and only available in
selected functions for supported models.
-Network connection is required to use the
voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.
When a voice is recognized, the processing
message appears on the screen.
• Use the magic remote control no further
than 10 cm from your face.
Used for viewing 3D video.
/Q.MENU
VOL
CH
/Q.MENU
Accesses the Universal Control.
Accesses the quick menu.
VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
1
31
2
i
The Magic Remote Control operates by pairing with your
TV.
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the TV on and
press the
Wheel (OK). When registration
is completed, the completion message
appears on the screen.
If registration fails, turn the TV off and back
on, then press the
Wheel (OK) to
complete registration.
How to Re-register the Magic Remote Control
BACK
SMART
1 Press and hold the
BACK and
buttons together for 5 seconds
SMART
to reset, then register it by following “How
to register the Magic remote control”
above.
2 To re-register the Magic remote control,
press and hold the
BACK button for 5
seconds toward the TV.
t)
1 You can move the pointer by moving the
remote up and down or left and right.
»»If the pointer does not work properly,
wait 10 seconds and then try again.
2 If the pointer disappears, move the remote
control slightly to left or right. It will then
automatically appear on the screen.
»»If the pointer has not been used for a
certain period of time, it will disappear.
1
2
3
If you press
Wheel (OK) on the Magic remote
control, the screen above opens.
It shows information about the current program
and screen.
Pressing this button will display number
keypad which you can select channel number.
You can select My Apps Menu.
Precautions to Take when Using
the Magic Remote Control
yyUse the Magic remote control within the maximum
communication distance (10 m, 32.8ft). Using the remote
control beyond this distance, or with an object obstructing
it, may cause a communication failure.
yyA communication failure may occur due to nearby devices.
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic remote control.
yyThe Magic remote control may be damaged or may
malfunction if it is dropped or receives a heavy impact.
yyTake care not to bump into nearby furniture or other
people when using the Magic remote control.
yyManufacturer and installer cannot provide service related
to human safety as the applicable wireless device has
possibility of electric wave interference.
yyIt is recommended that an Access Point (AP) be located
more than 1 m (3.28 ft) away from the TV. If the AP is
installed closer than 1 m (3.28 ft), the Magic remote
control may not perform as expected due to frequency
interference.
ENGLISH
How to use Magic Remote Control
3
32
WATCHING TV
WATCHING TV
Turning the TV on for the first time
NOTE
yySelect Home when prompted. Store mode
puts the TV in demo mode.
yyIf you select Store, the any customized
settings will switch back to the default settings
of Store in 5 minutes.
yyThe Standby light feature is disabled in Store
Demo mode.
When you turn the TV on for the first time, the Initial
setting screen appears. Select a language and customize
the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press the power button on the
remote control to turn the TV on.
The Initial setting screen appears if you turn the TV
on for the first time.
4
NOTE
NOTE
yyIf you do not complete the Initial setting, it will
appear whenever the TV turns on.
yyDisconnect the power cord from the power
outlet when you do not use the TV for a long
period of time.
yyYou can also access Initial Setting by accessing
OPTION in the main menu.
3
Follow the on-screen instructions to customize your
TV settings according to your preferences.
Language Selection
ENGLISH
Selects a language to
display.

Enviroment Selection
Select Home for the home
environment.

Time Zone Setting

Auto Energy Saving mode
Selects the time zone and
daylight saving.
(Depending on country)
Select Auto Energy Saving
mode.
Setting

Network Connection

Select TV watching Type
Sets your network to
enable network-related
features on the TV.
Set the TV and set-top box
for each watching type.

Auto Tuning
Scans and saves available
channels automatically.

Setting is complete
Confirms the setting
options.

Experience Magic
Remote Control
When the basic settings are complete,
press the OK button.
Simple guide of Magic
Remote Control
(Depending on model)
5
To turn the TV off, press the power button on the
remote control.
USING THE USER GUIDE
USING THE USER GUIDE
OPTION > To set language
SMART
 Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
User Guide allows you to easily access detailed TV
information.
1
2
Press SMART
menu.
button to access the Smart Home
Menu
Language
Selects a screen menu language.
Audio
Language
[In Digital Mode Only]
When watching a digital broadcast containing several audio
languages, you can select the language you want.
Voice Search
Language
Select User Guide and press the OK button.
Select the language to make voice search
✎O
nly the voice search adopted model support this
setting.
33
1
2
Try Now
Close
1
Shows the description of the selected menu. You
can use
/
to move between pages.
2
Moves to the selected menu directly from the
User Guide.

User Guide
ENGLISH
1
User Guide
To use input device
To set time options
CHANNEL Setting
To set TV lock options
PICTURE, SOUND Setting
To set language
OPTION
LG SMART Function
Advanced Function
To set caption
To set other options
Information
Index
2
3
Online User Guide
4
5
(Depending on country)
1
2
Shows the video you were watching.
Guide categories.
List of topics in the current category.
3
You can use
pages.
4
An index of key words present in the User Guide.
5
Provides the detailed information on the functions
of LG Smart TV when the Internet is connected.
(It may not be available depending on the country/
language.)
/
button to move between
34
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
AC 100 - 240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
75 Ω
Operating Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
42LA6200
(42LA6200-UA)
MODELS
42LA6205
(42LA6205-UA)
964 x 631 x 294 (mm)
With stand
37.9 x 24.8 x 11.5 (inch)
Dimensions (Width x
Height x Depth)
964 x 573 x 78 (mm)
Without stand
ENGLISH
Weight
37.9 x 22.5 x 3.0 (inch)
With stand
11.8 Kg (26.0 lbs)
Without stand
10.0 Kg (22.0 lbs)
Current Value / Power consumption
MODELS
50LA6200
(50LA6200-UA)
47LA6205
(47LA6205-UA)
50LA6205
(50LA6205-UA)
1,076 x 695 x 327 (mm)
1,131 x 725 x 327 (mm)
44.5 x 28.5 x 12.8 (inch)
1,076 x 637 x 79.4 (mm)
1,131 x 667 x 80.9 (mm)
42.3 x 25.0 x 3.1 (inch)
44.5 x 26.2 x 3.1 (inch)
With stand
15.0 Kg (33.0 lbs)
17.0 Kg (37.4 lbs)
Without stand
12.8 Kg (28.2 lbs)
14.5 Kg (31.9 lbs)
1.3 A / 130 W
1.4 A / 140 W
55LA6200
(55LA6200-UA)
60LA6200
(60LA6200-UA)
55LA6205
(55LA6205-UA)
60LA6205
(60LA6205-UA)
Dimensions (Width x
Height x Depth)
Without stand
Current Value / Power consumption
MODELS
1,246 x 803 x 343 (mm)
1,355 x 865 x 343 (mm)
49.0 x 31.6 x 13.5 (inch)
53.3 x 34.0 x 13.5 (inch)
1,246 x 732 x 77.2 (mm)
1,355 x 793 x 65.3 (mm)
49.0 x 28.8 x 3.0 (inch)
53.3 x 31.2 x 2.5 (inch)
With stand
21.5 Kg (47.3 lbs)
25.9 Kg (57.0 lbs)
Without stand
18.7 Kg (41.2 lbs)
23.1 Kg (50.9 lbs)
1.6 A / 160 W
1.8 A / 180 W
With stand
Dimensions (Width x
Height x Depth)
Without stand
Weight
47LA6200
(47LA6200-UA)
42.3 x 27.3 x 12.8 (inch)
With stand
Weight
1.1 A / 110 W
Current Value / Power consumption
SPECIFICATIONS
HDMI (DTV) supported mode
Resolution
HDMI (PC) supported mode
Horizontal Frequency
(kHz)
Vertical
Frequency (Hz)
Horizontal
Frequency (kHz)
Resolution
Vertical Frequency
(Hz)
720x480
31.469
31.50
59.94
60.00
640x480
31.469
59.94
800x600
37.879
60.31
1280x720
44.96
45.00
59.94
60.00
1024x768
48.363
60.00
59.94
60.00
23.97
24.000
29.976
30.00
59.94
60
1152x864
54.348
60.053
1360x768
47.712
60.015
1920x1080
33.72
33.75
26.97
27.000
33.716
33.75
67.43
67.500
1280x1024
63.981
60.020
1920x1080
67.5
60.00
Wireless LAN module (WN8122E1) specification
Component supported mode
Standard
Horizontal
Frequency (kHz)
Resolution
720x480i
1280x720p
1920x1080i
1920x1080p
Vertical
Frequency (Hz)
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
15.73
59.94
15.73
60.00
5725 to 5850 MHz
31.47
59.94
802.11a: 16.5 dBm
31.50
60
802.11b: 16 dBm
44.96
59.94
45.00
60.00
802.11n - 2.4GHz: 15.5 dBm
33.72
59.94
802.11n - 5GHz: 16.5 dBm
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.500
60.00
Output Power (Max.)
yyBecause band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
yyContains FCC ID: BEJWN8122E1
Contains IC: 2703H-WN8122E1
Bluetooth module (BM-LDS401) specification
(For LA6205 series)
Component port connecting information
Standard
Component ports on the
Y
PB
PR
Y
PB
PR
Video output ports
Y
B-Y
R-Y
on DVD player
Y
Cb
Cr
Y
Pb
Pr
TV
802.11g: 15.5 dBm
Frequency Range
Output Power (Max.)
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
yyContains FCC ID: BEJLDS401
Contains IC: 2703H-LDS401
ENGLISH
720x480p
35
36
SPECIFICATIONS
3D supported mode (For 3D TV)
yyVideo, which is input as below media contents is switched into the 3D screen automatically.
3D supported mode automatically
Input
Signal
1080p
HDMI
1080i
720p
480p
USB
1080p
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
54.00
24
67.50
30
27.00
24
33.75
30
67.50
60
Playable 3D video format
F/P, L/A
67.50
F/P, F/A
33.75
S/S, T&B, S/S Full
90.00
45.00
F/P, L/A
S/S, T&B, S/S Full
60
63.00
F/P, L/A
31.50
T/B, S/S, S/S Full
33.75
30
S/S, T&B, C/B, MPO(Photo)
DLNA
Playable 3D video format
ENGLISH
DTV
Dual Stream
S/S : Side by Side, S/S Full :Side by Side Full, S/S Half :Side by Side Half,
T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative, L/A : Line Alternative, C/B : Checker Board
R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential
SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP
37
3D supported mode manually
Input
Signal
TV
-
ATV(CVBS)
-
Component
-
HDMI-PC
HDMI-DTV
USB / DLNA
(Movie)
USB / DLNA
(Photo)
1080p
Playable 3D video format
2D to 3D, S/S, T&B
2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S)
Others
2D to 3D, S/S, T&B
Interlace
2D to 3D, S/S, T&B
Progressive
704 x 480p (Over)
704 x 480i (Over)
2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S )
2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S )
2D to 3D, S/S, T&B
704 x 480 (Under)
2D to 3D
320 x 240 (Over)
2D to 3D, S/S, T&B
320 x 240 (Under)
2D to 3D
1024 x 768p
1280 x 720p
2D to 3D, S/S, T&B
1920 x 1080p
Others
2D to 3D
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit ‘www.lg.com’.
ENGLISH
Miracast™ / WiDi
38
MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
yyMake sure to turn the power off and disconnect the power cord and all other cables first.
yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to
prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe
immediately with a dry cloth.
CAUTION
yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the
screen and image distortions.
yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as
these may damage the screen’s finish and cause discoloration.
yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
ENGLISH
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to
yyCheck if the batteries are still working and properly installed ( to ,
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings.
yyIf there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
).
CHILD SAFETY:
It Makes A Difference How and Where
You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product,
please keep these safety tips in mind:
THE ISSUE
• The home theater entertainment experience is a growing trend and
larger flat panel displays are popular purchases. However, flat panel
displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
• Flat panel displays that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests or carts may fall over
and cause injury.
THIS MANUFACURER CARES!
• The consumer electronics industry is committed to making home
entertainment enjoyable and safe.
TUNE INTO SAFETY
• One size does NOT fit all. Follow the manufacturer’s
recommendations for the safe installation and use of your flat panel
display.
• Carefully read and understand all enclosed instructions for proper
use of this product.
• Don’t allow children to climb on or play with furniture and television
sets.
• Don’t allow place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.
• Remember that children can become excited while watching a
program, especially on a “larger than life” flat panel display.
Care should be taken to place or install the display where it cannot
be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables connected to the
flat panel display so that they cannot be pulled or grabbed by curious
children.
WALL MOUNTING: IF YOU DECIDE TO WALL
MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount
manufacturers.
• If you have any doubts about your ability to safely install your flat
panel display, contact your retailer about professional installation.
• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted to
walls with steel studs or old cinder block construction.
If you are unsure, contact a professional installer.
• A minimum of two people are required for installation.
Flat panel displays can be heavy.
LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000
1-888-865-3026
1-888-542-2623
USA, Consumer User
USA, Commercial User
CANADA
Register your product Online!
www.lg.com
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
This product qualifies for ENERGY STAR in the
“factory default (Home Use)” setting.
Changing the factory default settings or enabling
other features may increase power consumption
that could exceed the limits necessary to quality for
ENERGY STAR.
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
45
Q.Menu
R/C Button
01
CH -, PR -
R/C Button
4C
List, - (ATSC Only)
R/C Button
02
Volume +
R/C Button
53
List
R/C Button
03
Volume -
R/C Button
5B
Exit
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
61
Blue
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
63
Yellow
R/C Button
08
Power
R/C Button
71
Green
R/C Button
09
Mute
R/C Button
72
Red
R/C Button
0B
Input
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0E
SLEEP
R/C Button
91
AD (Audio Description)
R/C Button
0F
TV, TV/RAD
R/C Button
7A
User Guide
R/C Button
R/C Button
7C
Smart / Home
R/C Button
10 - 19 Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
7E
SIMPLINK
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8E
►► (Forward)
R/C Button
20
Text (Teletext)
R/C Button
8F
◄◄ (Rewind)
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AA
Info
R/C Button
28
Return (BACK)
R/C Button
AB
Program Guide
R/C Button
30
AV (Audio / Video) Mode
R/C Button
B0
► (Play)
R/C Button
39
Caption/Subtitle
R/C Button
B1
ꕗ (Stop / Live TV)
R/C Button
40
Λ (Arrow Key / Cursor Up)
R/C Button
BA
ꕘ (Freeze / Slow Play /
Pause)
R/C Button
41
V (Arrow Key / Cursor
Down)
R/C Button
BD
ꔄ (REC)
R/C Button
42
My Apps
R/C Button
DC
3D
R/C Button
43
Menu / Settings
R/C Button
9F
App / *
R/C Button
44
OK / Enter
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
1
3
(PC)
2
SERVICE ONLY
(PC)
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN IN
4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
RS-232C IN
(CONTROL & SERVICE)
Phone jack Type
RS-232C
• You need to purchase the phone-jack to RS-232 cable required
for theIN connection between the PC and
(CONTROL & SERVICE)
the TV, which is specified in the manual.
(TV)
(TV)
(PC)
(PC)
* For other models, connect to the USB port.
1
3
(PC)
(PC)
1
3
2
2
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
RS-232C with RS-232C Cable (Legacy)
(TV)
(TV)
(TV)
(TV)
-- This connection can only be used for the following models: 55/47/39LN5450-UA,
55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.
1
3
(PC)
(PC)
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(TV)
(TV)
(CONTROL & SERVICE)
2
-- This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF,
50/60PN6500-UA, and 60PN6550-UA.
Customer Computer
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RS-232C IN
RXD
2
2
TXD
TXD
3
1
RXD
GND
5
3
GND
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
6
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to OPTION and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power off k
a
00
02. Aspect
Ratio
k
c
(p.7)
03. Screen
Mute
k
d
(p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast
k
g
00 to 64
07.
Brightness
k
h
00 to 64
04. Volume
Mute
05. Volume
Control
08. Color/
Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10.
Sharpness
k
k
00 to 32
11. OSD
Select
k
l
00 to 01
m
00 to 01
12. Remote
Control Lock k
Mode
COMMAND1 COMMAND2
DATA
(Hexadecimal)
13. Balance
14. Color
(Colour)
Temperature
15. ISM
Method (Only
Plasma TV)
16. Energy
Saving
17. Tune
Command
18. Channel
(Programme)
Add/Del(Skip)
k
t
00 to 64
x
u
00 to 64
j
p
(p.8)
j
q
00 to 05
m
a
(p.8)
m
b
00 to 01
19. Key
m
c
Key Codes
20. Control
Back Light,
Control Panel
Light
21. Input
select (Main)
22. 3D (Only
3D models)
23. Extended
3D (Only 3D
models)
m
g
00 to 64
x
b
(p.10)
x
t
(p.11)
x
v
(p.11)
* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
01.Power (Command: k a)
►► To control Power Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show Power On. (Works TV is On Only)
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][01][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : C
inema Zoom 1
Original
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
03. Screen Mute (Command: k d)
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04.Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05.Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07.Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
08.Color/Colour (Command: k i)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
* Commands may work differently depending on model and signal.
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
09.Tint (Command: k j)
14.Color(Colour) Temperature (Command: x u)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
10.Sharpness (Command: k k)
15.ISM Method (Command: j p) (Only Plasma TV)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11.OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 01 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12.Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 01 : Lock off
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
16.Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13.Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
17.Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan, Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Analogue Terrestrial/Cable
[Data 00][Data 01] Channel Data
Data00 : High byte channel data
Data01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 80 : Cable TV (CATV)
EXTERNAL CONTROL DEVICE SETUP
[Data 00][Data 01]: Channel Data
Data00 : High Channel data
Data01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data05: Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 01 : Cable TV (CATV)
* Digital Terrestrial/Cable
Data00 : xx (Don't care)
Data02 : Input Source (Digital)
- 10 : Terrestrial TV (DTV)
- 20 : Terrestrial Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
[Data 01][Data 02]: Major Channel Number
Data01 : High byte Channel Data
Data02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data03 : High byte Channel Data
Data04 : Low byte Channel Data
* Tune Command Examples:
1.Tune to the analogue terrestrial (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analogue Terrestrial TV = 00
Result = ma 00 00 0a 00
Data05 : Input Source (Digital)
- 02 : Terrestrial TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
Number
- 22 : Terrestrial TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
2.Tune to the digital terrestrial (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Terrestrial TV = 10
Result = ma 00 00 01 10
3.Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
* Analogue Terrestrial/Cable
Data00 : Physical Channel Number
- Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data01 & 02: xx (Don't care)
Data03 & 04: xx (Don't care)
* Tune Command Examples:
1.Tune to the analogue cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analogue Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2.Tune to the digital terrestrial (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Terrestrial TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Terrestrial/Satellite
Data 00: xx (Don't care)
ENGLISH
ENG
* Digital Terrestrial/Cable/Satellite
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Terrestrial TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital terrestrial (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Terrestrial TV = 02
Total = ma 00 00 00 11 00 01 02
20.Control Back Light (Command: m g)
• For LCD TV / LED TV
►► To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21.Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
2.Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
Transmission [x][b][ ][Set ID][ ][Data][Cr]
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
18.Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
19.Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
DataKey code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
EXTERNAL CONTROL DEVICE SETUP
23.Extended 3D(Command: x v) (only 3D models)
(Depending on model)
(Depending on model)
►► To change 3D option for TV.
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
DataStructure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02]
have no meaning.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 00]
[Data 01]
[Data 02]
[Data 03]
00
O
O
X
01
X
X
X
02
X
X
X
03
X
X
O
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
3) When[Data 00] is 06, 07, 08
00 : Off
01 : On
4) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
ENGLISH
ENG
22.3D(Command: x t) (only 3D models)
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement