LG RC8066AS2Z Owner's manual
Please read this manual carefully before operating
your dryer and retain it for future reference.
P/NO. : MFL67708613
Big Capacity Drum
The big capacity drum on this LG dryer allows you to
dry more washing at once, saving time!
Lower Energy Consumption
LG dryers use less energy than conventional dryers due to optimised heat exchanger and auto cleaningTM technology.
This LG Heat pump dryer has been designed to save you money.
Reduced Drying Times
Drying times are now shorter due to Hybrid heating system
and optimised heat exchanger on this LG dryer.
Reduced noise levels
We have reduced the operating noise of this LG dryer by using
innovative sound-absorbing and noise-screening technologies,
making it much quieter than conventional dryers.
Steam Refresh
LG’s steam technology allows you to inject fabrics with a swirling
jet of hot steam to refresh clothes, reduce static, and make
ironing easier. Simply select the Steam Refresh cycle, or you can
add a steam option to selected cycles.
Easy of Use
The wide, electronically controlled LED display on this machine
is very easy to use. Simply select the cycle you require
and your LG dryer will do the rest.
SmartDiagnosis™ is available.
C ontents
Safety Instructions
Installation Instructions
Appearance & Design
Operating Your Dryer
Additional Functions
Caring for Your Dryer
Additional Tips for Smart Use
Troubleshooting Guide
Technical Data
afety Instructions
For your safety, the information in this manual must be followed to minimise the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury or death.
• Serious injury or death may occur when not observing the following rules.
• It is strictly forbidden to use the product for anything other than the manufacturer authorised
usage. LG doesn't take full responsibility for the damage by inaccurate and improper usages.
• Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you
understand and have the skills to carry out.
• Before plugging in the power
cord, make sure cord is
earthed and connected to a
circuit breaker.
No earthing may cause
breakdowns or an electric
• Do not use a damaged power
cord or place heavy objects
on the cord.
A damaged power cord may
cause fire or electric shock.
• Do not plug into an adaptor. Do
not use with an extension lead.
• Do not touch the plug or
switch on with wet hands.
Abnormal heating of outlet
may cause a fire.
May cause an electric shock.
• Do not remove the top plate
when installing the dryer.
• Do not modify this product.
• Disconnect the power cord by
grasping the plug, not the
May cause breakdown, fire or
electric shock.
May cause damage of cord
resulting in fire or electric
• Keep the dryer away from
cookers, naked flames, or any
other inflammable objects.
• Wipe dirt and stains from the
power cord and insert the
plug firmly into the socket.
May cause fire or parts to melt.
Dirt and poor connections
may cause fire.
Safety Instructions
afety Instructions
Safety Instructions
• Do not use if power cord,
plug or socket is damaged.
• Keep pets away from the
May cause fire or electric
Pets may damage the dryer,
or may receive an electric
• Do not install or store the
dryer where it will be exposed
to the weather.
• Do not press buttons using
sharp implements such as
knives and screwdrivers.
May cause fire, electric shock
or malfunction.
May damage the dryer or
cause electric shock.
• Do not use an extension cord
or an adaptor to connect the
power cord.
• Do not dry articles that have
been cleaned in, washed in,
soaked in, or spotted with
combustible or explosive
substances (such as wax, oil,
paint, gasoline, degreasers,
dry-cleaning solvents,
kerosene, etc.).
May cause fire or electric
May cause fire or explosion.
• Do not splash water on to the
• Do not place flammable items
near the dryer.
May cause fire or electric shock.
May cause toxic gases, parts
damage, fire or explosion.
• Unplug the power cord when
cleaning or not using the
• Before the appliance is
removed from service or
discarded, unplug the
appliance then disassemble
the door and cut off the
power cord to prevent misuse.
Water or dirt may cause an
electric shock.
May cause accident and
• Do not allow children or pets to play
on or inside the dryer.
• The appliance is not intended for use
by young children or infirm people
without supervision.
• Young children should be supervised
to ensure that they do not play with
Children and pets may injure or suffocate themselves.
• The packaging bag is not a
toy. Destroy after opening.
To avoid the possibility of
suffocation, keep the
packaging bag away from
babies and
afety Instructions
• If this appliance is supplied from a cord extension set or an electrical connector, the portable
outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and
should not be placed in a tumble dryer.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with
an extra amount of detergent before being dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry cleaning solvents or other flammable or explosive substances
should not be used in a tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom
rugs, nonslip mats or raincoats) should not be dried in a tumble dryer on a heat setting.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not be dried in
the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Plastic articles such as shower caps or waterproof nappy covers should not be placed
in a tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• If the dryer is installed on a carpet, damage may be caused to it by ventilated air.
May cause spontaneous combustion leading to explosion and fire.
• Fabric softeners, or similar products, should be used as specified by the fabric softener
• To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property
damage, personal injury or death.
Safety Instructions
It may cause an electric shock, a fire, malfunction and deformation.
Installation Instructions
nstallation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the preparation and
use of your dryer, and it is important that you review this entire manual before proceeding with any
installation or use. Be sure to observe all listed warnings and cautions. These installation instructions are
intended for use by qualified installers. Read these installation instructions completely and carefully.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t try to
lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the door,
they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or cables.
Check the dryer for damage occurred
during transportation.
Do not connect the dryer if it has visible signs of
If you are not confident, contact your local LG
agent. Always empty the dryer completely
before transporting it.
Your dryer should not be located near to a gas
hob, cooker, heater or grill, as flames from the
burners could damage your dryer. When the dryer
is fitted beneath a work surface, allow
30cm~50cm space at either side of the dryer and
at the back of the dryer to allow air to exit the rear
grill. This air flow is critical for condensation of
water during the drying process.
If you use this dryer near or stacked on top of
your washing machine, separate main plugs and
sockets must be used for each appliance.
Do not use a 2-way adaptor or extension lead.
You can stack the dryer on top of your washing
machine to save space. A stacking kit is available
from your local appliance specialist.
Stacking Installation Instructions
Your LG dryer can be placed on top of a front loading washing machine and securely fixed with a stacking kit (see following page for instructions). This installation must be conducted by an experienced
installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing machine and will
ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulations are dangerous. Any of these could result in an electric
shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, trapped in a door,
or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
nstallation Instructions
Stacking Kit
In order to stack this dryer an LG stacking kit is
This dryer may only be stacked on top of an LG washer. DO NOT attempt to stack this dryer on any other
washer, as damage, injury or property damage could
• Incorrect installation can cause serious
• The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more experienced service personnel.
• The dryer is not suitable for a built-in installation. Please do not install as a built-in
• Do not operate if the dryer is disassembled.
3. Align the stacking kit holes and the rear cover
3-1) 23.6 inch(600mm)
Washer Top plate size
21.7 inch
23.6 inch
Installation Procedure
1. Place the LG dryer on the LG washing machine.
2. Remove the two screws from the bottom of the
rear cover on each side as illustrated below.
3-2) 21.7 inch(550mm)
• Fasten the 2 screws that were removed earlier
from dryer to stacking kit.
• Use 4 screws in accessory box [0.6inch(16mm)]
to assemble washer rear cover and stacking kit.
• The procedure for the opposite side will be the
Installation Instructions
nstallation Instructions
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the event of
malfunction or breakdown, earthing will reduce
the risk of electric shock by providing a path of
least resistance for the electric current.
This appliance is equipped with an earthed cord
and an earthing plug. The plug must be plugged
into an appropriate outlet that is properly
installed and earthed in accordance with local
- For better drying performance, please
keep the rear of the product away from
the wall.
- Do not install the dryer where there is a
risk of frost or dust.
• The tumbles dryer may not be able to
operate properly or may be damaged by
freezing of condensed water in the
pump and drain hose.
Additional Grounding Procedure
Some countries may require a separate ground. In
such cases, the required accessory ground wire,
clamp and screw must be purchased
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A plumber
will be required.
The dryer should not be installed next to a
refrigeration appliance.
Do not install the dryer next to a
high-temperature appliance, such as a
refrigerator, oven or stove etc.
which can affect drying performance and
The dryer works best at a room
temperature of 23°C.
Avoid installing the product around a heat
The warm air venting from the rear side of
the dryer must be well ventilated.
If not, this can bring on problems.
nstallation Instructions
Level the Dryer
1. Levelling the dryer prevents unnecessary
noise and vibration. Place your dryer on a
solid, level floor.
2. If the dryer is not properly level, adjust the
front levelling feet as necessary.
Turn them clockwise to raise and
counter-clockwise to lower until the dryer no
longer wobbles, both front-to-back,
side-to-side and corner-to-corner.
Adjustable Feet
Dryer is raised
Adjustable Feet
Dryer is lowered
Adjustable Feet
Diagonal Check
When pushing down the edges of the machine,
the machine should not move up and down at all
(Please check both directions).
If the machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
Installation Instructions
Place the dryer in an area free from flammable
materials, condensation and not liable to
nstallation Instructions
Connecting the water supply hose
Installation Instructions
The dryer must be connected to the cold water tap using the new water supply hose. Do not use old
Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2).
Do not strip or cross-thread when connecting inlet hose to the valve.
If the water supply pressure is more than 1000 kPa, a decompression device should be installed.
Periodically check the condition of the hose and replace the hose if necessary.
Periodically inspect and replace hoses if bulges, kinks, cuts, wear or leaks are found.
Step 1 : Check rubber seal in the inlet hose.
Two rubber seals are supplied with the water inlet
They are used for preventing water leaks.
Make sure the connection to the tap is sufficiently
Y connector
Step 2 : Check the installation environment.
A type
-. When using both washer and dryer with one
water tap.
Assemble Y connector and short hose.
Connect the female part of the short hose to the
water tap.
Connect the male part of Y connector to the
female part of the long hose.
Connect another male part of Y connector to the
female part of the inlet hose of washer.
B type
-. When using only the dryer from one tap.
Connect the female part of the long hose to the
water tap.
Y connector
• After connecting the inlet hose to water tap, turn
on the water tap to flush out foreign substances
(dirt, sand or sawdust) in the water lines.
Let water drain into a bucket, and check the
water temperature.
nstallation Instructions
Step 4 : Turn on the cold water tap.
Check for leaks.
Check that the water taps are turned on.
Check for leaks around “Y” connector, tap, and
• After completing the connection, if water
leaks from the hose, repeat the same steps.
Installation Instructions
Step 3: Connect hose to dryer.
• Connect the water supply hoses to the COLD
water tap tightly by hand and then tighten
another 2/3 turn with pliers.
Make sure that there are no kinks in the hose
and that they are not crushed.
A ppearance & Design
Product Layout
Control Panel
Appearance & Design
Water Container
Condenser Cover
Air Ventilation Grill
Control Panel
SmartDiagnosis™ function is
available only for the products
with a SmartDiagnosis™ mark.
• Time Delay
• Anti Crease
• Favorite
• Buzzer
Cycle selector
• (More)
• Steam
• Spin Speed
(*Drum Light)
• Dry Level
(*Child Lock)
• (Less)
O perating Your Dryer
Cycle Selection Table
Sensor Dry Cycle
Easy care
Bulky Item
Bed linen, table linen, towels,
T-shirts and polo shirts
Bed linen, table linen, tracksuits,
anoraks and blankets
Shirts and blouses
Trousers, dresses, skirts and
Shirts, T-shirts, trousers,
under-wear and socks
Shirts, T-shirts, under-wear,
anoraks and socks
Bed clothes, sheets
Jeans and colour fading
For thick and quilted fabrics
For thick and quilted fabrics that do not need to be
For fabrics that do not need to be ironed
For fabrics that do not need to be ironed
For fabrics that do need to be ironed
For thick and quilted fabrics that do not need to be
For fabrics that do not need to be ironed
For fabrics that do need to be ironed
For polyamide, acrylic, and polyester that do not
need to be ironed
For polyamide, acrylic, polyester that do need to be
For bulky items
Steam Refresh
Shirts and blouses
Sports Wear
Soccer kit and training wear
Linen and towels, excluding
fabrics applied to delicate, sports For small loads of suitable fabrics with short drying
wear, bulky Item cycle.
For fabrics that are heat-sensitive like synthetic
Silk, fine fabrics and lingerie
For wool fabrics
Timed Drying Cycle
Refresh clothes without tumble drying
Silk, wool, delicate lingerie
Tumbles without heat
All fabrics that need refreshing
Bath towels, bath robes,
Small items & damp clothing
dishcloth and quilted fabrics
Everyday items suitable for heat drying
made of acrylic
Rack Dry
Cool Air
Warm Air
Sanitising non washable items quickly and easily
using the power of steam alone.
Recommend to use this cycle for cotton and
polyester material.
Crease release of fabric
Fabrics are not dried completely. Hang up fabrics!
For polyester material
Comforter bedding and
Children’s clothing
For jeans which do not need to be ironed
Steam Hygiene
Quick Dry
Dry Level
If the load is less than 1kg, please use the “Warm Air” Cycle in timed Drying Cycle.
Wool items should be dried using the “Wool” Cycle and heat-sensitive fabrics including silk, underwear and
lingerie should be dried using the “Delicate” Cycle. Please comply with the recommended laundry load when
you select your desired cycle found on page 23, otherwise your clothes may be damaged.
Operating Your Dryer
Mixed Fabric
Laundry Type
Towels, dressing gowns and bed
Terry towels, tea towels, towels
and bed linen
Bath towels, tea towels,
underwear and cotton socks
Sheets, pillowcase and towels
O perating Your Dryer
Please read before using your LG dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG dryer is
correctly installed and ready for use. (See installation instructions)
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG dryer until
the machine is balanced.
2. Check the water container, filter, control panel and drum to make sure everything is in place.
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any odours from the
interior of the LG dryer to disperse.
Operating Your Dryer
The final part of a tumble dryer cycle occurs without heat (cool down cycle) so that the items are
left at a temperature to ensure that they will not be damaged.
1. Turn the power on.
Turn the
power on.
First, press the ‘‘Power’’ button. The indicator
light above the button will become illuminated
indicating that the machine is all set to run.
2. Open the door.
3. Check the filter and water container
are clean.
The filter is inside the door rim or in the back
of the door. It needs to be cleaned before and
after drying.
Open the door and check the filter is clean. If
not, please clean it referring to page 19.
Also check if the water container needs to be
emptied for better drying results.
Open the
4. Place laundry into the drum after
The clothes should be sorted by fabric type
and dryness level and all the strings and belts
of clothes should be well tied and fixed before
being put into the drum.
Push the laundry to the back to keep it away
from the door seal.
If not, the door seal and clothes may be
Do not dry unwashed items in the tumble
Check the
O perating Your Dryer
5. Close the door.
Select the
Before you close the door, make sure fabrics are well placed inside and that foreign
objects, especially flammable ones, are not
caught around the door.
Be careful not to trap laundry between the
loading door and rubber seal.
6. Select the drying cycle you want.
Take out
the laundry.
7. Press the start button.
You will hear the drum rotating.
8. After the cycle has finished, open the
door and remove the laundry.
Be careful! The drum inside could still be hot.
(Operation time varies depending on your cycle
selection or options.)
Clean the
the filter
if it is
The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that
the items are left at a temperature that will not
damage them.
9. Clean the filter and empty the water
The filter should be cleaned after each load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
- Take care if using a vacuum cleaner to clean
the filter, as it is easily damaged and torn.
If there is a residue build up on the filter,
scrub the filter with a brush to remove.
- If you want to open the door while the dryer
is operating, please press the Start/Pause
button first, wait until the drum completely
stops and then open the door.
Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly
removed and spread out so that the heat is
This dryer must not be used for purposes
other than those for which it was designed.
Operating Your Dryer
You can choose a cycle by turning the cycle
selector knob until the required cycle is indicated.
If you press Start/Pause button without choosing a
cycle, the dryer will proceed with the Cupboard
cycle. Please refer to Cycle Selection table (page
13) for the detailed information.
O perating your dryer
Rack Dry
The drying rack is placed inside the dryer as seen in the
picture below. Remove and discard packing material
before use.
The Rack Dry is designed for use with items that
you do not want to tumble dry including sweaters and
delicate fabrics.
Check the lint filter and remove any lint
accumulated from items dried on the rack.
Operating Your Dryer
To use the Drying rack :
1. Open the door.
2. Do not remove the filter.
3. Place drying rack over the bottom of
the dryer door opening.
Reset the rack on the dryer back
Push down on the frame front to
secure over filter.
4. Place wet items on top of the rack.
Allow space around items for air to
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
1. Insert wire
edge to the
drum centre.
2. Place delicate
fabrics or
A dditional Functions
Start/Pause Additional programme
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Cycle selector
• Cycles are available according to the
laundry type.
• The lamp will light up to indicate selected
Additional programme
• Use these buttons to select the desired
options for the selected cycle.
• This allows you to select additional options
and will light up when selected.
• This Start/Pause button is used to start the
dry cycle or pause the dry cycle.
• Press The Start/Pause button to stop the
cycle temporarily.
• When in Pause, the power is turned off
automatically after 4 minutes.
Additional Functions
A dditional Functions
Time Delay
You can use the Time Delay option to
delay the finishing time of the drying cycle.
Maximum Time Delay is 19 hours.
Minimum Time Delay is 3 hours.
1. Turn the dryer on.
2. Select a cycle.
3. Set time delay hour by pressing the
“ ”, “ ” button.
4. Press Start/Pause button.
Additional Functions
Anti Crease
The Anti Crease option prevents creases
that are formed when the laundry is not
unloaded promptly at the end of the drying
cycle. When Anti Crease is selected, the
dryer repeatedly runs and pauses, giving
you 2 hours to unload the laundry. If the
door is opened during the Anti Crease
option, the option is cancelled.
Favorite option allows you to store a
customised dry cycle for future use.
1. Turn the dryer on.
2. Select a cycle.
3. Select the option or additional program.
(Anti Crease, Spin Speed etc.)
4. Press and hold the Favorite option button
for 3 seconds.
The Favorite option is now stored for future
use. To reuse the stored cycle, select the
Favorite option and press Start/Pause.
Do not open the dryer door during Steam
cycles. Do not touch the steam nozzle in
the drum during or after the steam cycle.
Using the Steam cycle
The Steam Refresh cycle uses the power of
steam to quickly reduce wrinkles in fabrics.
1. Turn the dryer on.
2. Select steam cycle.
3. Press the “ ”, “ ” button.
4. Press the Start/Pause button.
For these settings, the dryer tumbles while
the water in the steam generator is heated.
Steam Hygiene
Steam Refresh
Easy Iron /
Static Shield
Static Shield
Cotton, Easy Care,
Mixed Fabric
Bulky Item
Do not use Steam cycle for delicates such
as wool, silk, and easily discoloured clothes.
Child Lock (
Drum Light
Whilst the dryer is running it is possible to
see inside the drum if you select the Drum
Light function.
- Light on : Door is opened.
- Light off : Door is closed.
Off automatically.
Spin speed
This additional programme is able to control
drying time and you can select high or normal.
(Default option is normal)
- High : When washing dehydration proceeds
from more than 1,200 rpm.
- Normal : When washing dehydration
proceeds from less than 1,000 rpm.
Spin RPM is based on the LG Washing
For the safety of children, press Dry Level
button for about 3 seconds.
You will see “
” indication on the LED.
You can see “
” sign on LED window.
- All controls except Child Lock and Power
buttons will be disabled.
- Child Lock continues after the end of cycle.
To turn the Child Lock off, press Dry Level
button for about 3 seconds.
This is an option to enable you to adjust
the volume of beeper sound.
C aring for Your Dryer
Care and Cleaning is Very Important
Empty Water Container
It’s not difficult to care for your dryer but it is important
that you do care for it. Follow the instructions below.
Condensed water is collected in the water container.
Empty the water container after every use.
Not doing so will affect the drying performance.
If the water container is full, the “Empty Water”
lamp glows and the buzzer sounds while the dryer
is operating. If this should occur, the water
container needs to be emptied within the next hour.
Clean Filter
Clean the filter after each use and check it before
each use. It should also be cleaned if the ‘‘Clean
Filter’’ light becomes illuminated and the buzzer
sounds whilst the dryer is in operation.
Cleaning or emptying the filter will reduce drying times
and energy consumption and lengthen the dryer life.
- The lint trap has to be cleaned frequently, if applicable.
- Lint must not to be allowed to accumulate around the
tumble dryer.
- The filter must be cleaned after every cycle is finished.
1. Pull out the
1. Open the door.
Caring for Your Dryer
2. Empty water
container in
the sink.
2. Pull the filter out.
3. Clean the filter
by using a
vacuum cleaner
or rinsing under
the tap.
4. Replace the filter.
- Push the filter all
the way down to
avoid interference
with the door.
5. Close the door.
3. Push it back.
4. Press the Start/Pause button.
A high atmospheric temperature and a small
room may both increase drying time as well as
energy consumption.
Do not drink the condensed water.
- After washing the filter please dry thoroughly.
- Lint must not be left to accumulate in the dryer.
If “Clean Filter” symbol is displayed during
the operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button.
If the laundry is not spun at a high speed
during washing, energy consumption and
drying time will increase.
In some instances, the LED window may
display “
” (Empty water symbol) and the
dryer may stop because the water container
is full.
C aring for Your Dryer
The condenser is also a very important part for efficient drying performance results so it needs special care from you. It
is recommended that the condenser be cleaned three or four times a year or when the condenser clean lamp blinks.
1. Push the cap and open the condensing
4. Clean the condenser thoroughly under a
tap, letting the water flow through
Caring for Your Dryer
< Front >
Condensing cover
< Side >
2. Open seal by turning the locking lever
5. Put everything back together by following the
instructions in reverse order
Sealing cover
The locking lever must be closed
after cleaning the condenser as below.
3. Pull the condenser out by inserting a finger
into the tab at the front of the condenser.
(Don’t force the condenser)
If “Clean Condenser” symbol is displayed,
clean the condenser promptly.
- Operating when the condenser is clogged
with lint can damage the dryer.
This also increases energy consumption.
- Do not use sharp objects to clean the heat
exchanger. This could cause damage and
- Never operate the dryer without the heat
C aring for Your Dryer
Ventilation Grill and Cool Air
Inlet Grill
Vacuum the front ventilation grill 3-4 times a year to
make sure there is no build up of lint or dirt that
could cause improper air flow.
3. Connect
drain hose
to the kit.
Moisture Sensor
Condensed Water Drain-out
Normally, condensed water is pumped up to the water
container where water is collected until manually emptied. Water can also be drained out directly to a mains
drain, especially when the dryer is stacked on top of a
washing machine. With a connecting kit for a mains
drain hose, simply change the water path and reroute
to the drainage facility as below:
1. Take
kit out.
2. Separate
hose from
the kit.
Caring for Your Dryer
- Warm air is exhausted through the ventilation grill
- Adequate ventilation has to be provided
to avoid the back flow of gases into the
room from appliances burning other
fuels, including open fires.
The device senses the moisture level of the
laundry during operation, which means it must
be cleaned regularly to remove any build up of
lime scale on the surface of the sensor. Wipe
the sensors inside drum (as illustrated)
C aring for Your Dryer
Before cleaning the dryer's interior, unplug the power cord to avoid electric shock hazards.
• Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if
there is no floor drain (gully) in the immediate vicinity.
The water inlet filter
" icon will be displayed on the control panel when water does not enter the dryer.
• If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Caring for Your Dryer
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Carefully remove the filter from inlet valve and
clean the filter using a bristle brush.
4. Replace the filter and tighten up the inlet hose.
A dditional Tips for Smart Use
Drying Guide
Capacity of dryer
Easy Care Iron
Bulky Item
Steam Hygiene
Steam Refresh
Sports Wear
Quick Dry
8 kg
8 kg
8 kg
8 kg
8 kg
4 kg
4 kg
4 kg
4 kg
4 kg
2 kg
3 kg
3 kg
Dress Shirts Max.5EA
2 kg
3 kg
1.5 kg
1 kg
Dry woollens on “wool’’ cycle. Be sure to follow fabric care
label symbols first. Wool may not be completely dried from
the cycle, so don't repeat drying. Pull woollens to their
original shape and dry them flat.
Display Drying Time
(Including Cooling Time)
Below are fabric care label Symbols.
Woven and Loopknit Materials
Tumble dry
Some woven and loopknit materials may shrink, depending on quality.
Permanent Press /
Crease resistant
Permanent Press and Synthetics
Do not overload your dryer. Take out permanent press
items as soon as the dryer stops to reduce creases.
Baby Clothes and Night Gowns
Gentle / Delicate
Do not tumble dry
Always check the manufacturer’s instructions.
Do not dry
Rubber and Plastics
High heating
Do not dry any items made from or containing rubber or
plastics such as:
a) Aprons, Bibs and Chair Covers
b) Curtains and Table Clothes
c) Bathmats
Medium heating
Low heating
No heat / air
Do not dry fibreglass articles in your dryer.
Glass particles left in the dryer could be picked up by your
clothes the next time you use the dryer and irritate your skin.
Line Dry / hang to dry
Fabric Care Labels
Dry flat
Clothes have their own wash care labels, so drying
according to the wash care label is recommended.
Not only that, the laundry must be sorted according to size
and type of fabric.
For the best drying performance and most efficient energy
usage, do not overload the dryer.
Drip dry
In the shade
Additional Tips for Smart Use
A dditional Tips for Smart Use
Product Specification
Additional Tips for Smart Use
Rated Capacity
Dryer Type
Energy Efficiency Class
Annual Energy Consumption (AEc )
Automatic Tumble Dryer
EU Ecolabel Award
Power Consumption at Full Load
-. Off-mode (Po )
-. Left-on mode (PI )
Duration of Left-on mode
Standard Cotton Program
Drying Time (Tt )
-. Tdry
-. Tdry1/2
Condensation Efficiency Class
-. Ct
-. Cdry
-. Cdry1/2
Sound Power Level
LG Electronics
Condenser Household Tumble Dryer
Cotton Light Normal
Estimated Performance
Programme Dry Level
Load Content
Cotton 100%
Cotton 100%
Off mode
mode (PI)
• Tested in accordance with EN61121 and Directive 932/2012
• Set programme at "Cotton Light Normal (Full & Half Load)" for test in accordance in conformity with
EN61121 and Directive 932/2012
- Standard Cotton programme : Cotton Light + Normal (Default)
(This is the most efficient programme in terms of the test conditions proposed by EN61121 and Directive 932/2012)
• Information about the ‘standard cotton programme’ specifies that it is suitable to dry normal wet cotton laundry and
that it is the most efficient programme in terms of energy consumption for drying wet cotton laundry.
• The test results depend on room temperature, type and amount of load, water hardness and water inlet
• If the product is installed as built under, it may cause performance degradation.
A dditional Tips for Smart Use
Spare Parts
Accessory Parts
Spare parts that are required under the terms
of warranty are provided free of charge. If the
warranty has expired then spare parts must be
purchased from the service centre.
• Accessories available:
Disposal of the Dryer
1. Dryer Rack (Included)
2. Y connector and hose (Included)
3. Condensing Drain Hose and Hose Holder
(Purchased Separately)
Service Contact
If there is a problem with your dryer, first consult
the Trouble Shooting Guide. If you cannot find
the error and you are unable to resolve the
problem, please contact the Service centre.
Stacking Kit
A Customer Service representative will ask you
the following questions:
1. Name, address and postcode
2. Phone number
3. Description of problem
4. Model number and serial number of your
5. Date of Purchase
Holder : 2EA, Screw : 4EA
Purchased Separately
• The stacking kit can be used for washer
top plate size 550mm and 600mm for
If stacking is needed, you must stack
the dryer upon an LG washing
A stacking kit is sold separately.
Additional Tips for Smart Use
It is requested that you dispose of your dryer
safely to protect your children and others from
possible injury.
The door, lid and other protruding parts must be
removed and the power cord should be cut off
before safe disposal.
roubleshooting Guide
Troubleshooting Tips
To save you time and money, the following page will help answer your questions before service call.
What to do
Dryer won’t run
1. Check dryer is plugged in.
2. Check "Start" button is pressed.
3. Check door is properly closed.
4. Check Room temperature is not below 5°C.
5. Check a fuse is not blown or the circuit breaker is tripped and replace them.
(Caution : electric dryers generally use two fuses or breakers)
After emptying the water container and Cleaning filter during operation, you must
press the Start button, then the dryer operates again.
It takes a long time
to dry
1. The filter should be cleaned after each load.
2. Check water container is emptied.
3. Check cleanness of condenser.
4. Select correct programme setting for fabric type
5. Check air ventilation grill or rear vents of dryer are not obstructed
6. Check clothes are not excessively wet
7. Check the dryer is not overloaded
Troubleshooting Guide
1. Check filter is clean
2. Check condenser unit is not clogged
Clothes are covered
in Fluff
The drying time is
not consistent
The drying time for a load will vary depending on the heat setting, the size of the load,
the type of fabrics, the wetness of the clothes and the condition of the lint filter.
Water is leaking
Check if the door or seal cover is dirty or damaged.
The clothes are
Check the laundry is not overloaded. Try a shorter drying time and remove items
whilst they still retain a slight amount of moisture. Use the anti-crease function.
The garments have
To avoid shrinkage, please follow the care and use instructions for your garment, as some fabrics shrink naturally when washed and other fabrics should
not be placed in a dryer.
Check lint filter is empty.
Check all the items in the dryer are clean
Check all the laundry has been correctly sorted by fabric type
Check dryer is not overloaded
Check if there is any paper, tissues or other degradable items amongst the
laundry and remove.
roubleshooting Guide
Error Mode
: The door must be closed and Start/Pause button must be pressed for re-operation.If
error message continues to occur, unplug the power cord and call the service centre
for advice.
: If error message continues to occur, unplug the power cord and call the service centre for
Drum light does not work
• Contact the customer service centre.
Troubleshooting Guide
roubleshooting Guide
The SmartDiagnosis™ function is available only
for the products with a SmartDiagnosis™ mark.
In case of a mobile phone with static option, the
smart diagnosis function may not operate.
Using SmartDiagnosis™
Troubleshooting Guide
• Only use this feature when instructed to do so
by the call centre. The transmission sounds
similar to a fax machine, and so has no
meaning except to the call centre.
• SmartDiagnosis™ cannot be activated if the
dryer does not power up. If this happens, then
troubleshooting must be done without
If you experience problems with your dryer,
call LG’s customer information centre. Follow
the call centre agent's instructions, and do the
following steps when
1. Press the Power button to turn on the dryer. Do
not press any other buttons or turn the cycle
selector knob.
2. When instructed to do so by the call centre,
place the mouthpiece of your phone close to the
"SmartDiagnosis™" icon and Power
Max. 10 mm
3. Press and hold the “ (More)” button for
three seconds, while holding the mouthpiece
of your phone close to the
"SmartDiagnosis™" icon and Power
4. Keep the phone in place until the tone transmission has finished.
This takes about 6 seconds, and the display
will count down the time.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
• Pressing the Power button during the transmission will shut off the SmartDiagnosis™.
5. Once the countdown is over and the tones
have stopped, resume your
conversation with the call centre agent, who
will then be able to assist you using the information transmitted for analysis during your
call to the customer information centre.
“Smart Diagnosis is a troubleshooting feature
designed to assist, not replace, the traditional
method of troubleshooting through service
calls. The effectiveness of this feature depends
upon various factors, including, but not limited
to, the reception of the cellular phone being
used for transmission, any external noise that
may be present during the transmission, and
the acoustics of the room where the machine is
located. Accordingly, LG does not guarantee
that Smart Diagnosis would accurately
troubleshoot any given issue.”
echnical Data
60 in.2
(387 cm2)
60 in.2
(387 cm2)
(2.5 cm)
(61.0 cm)
(2.5 cm)
Weight : 46.8kg, Black Door
46.5kg, Glass(Cr) Door
Ventilation Requirement
Electrical Requirements
Alcove or
230 V
50 Hz
Ensure air flow of
112 cu.ft./min
through dryer
Closet door must have
2(louvered) openings,
each having a minimum
area of 60 sq. inches
(387 sq.cm), located 3
inches (8 cm) from
bottom and top of door.
Ensure you connect the dryer to the correct
electricity voltage. The ratings plate on your
dryer shows you what the voltage should be.
Technical Data
W arranty
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your local council, waste disposal service or the shop
where you purchased the product.
• When disposing of the appliance, cut off the mains cable, destroy the plug and disassemble the door
to prevent anything from being trapped inside.
What is not covered.
Service trips to your home to instruct you on the product.
If the product is connected to any voltage other than that shown on the rating plate.
Faults caused by accidental damage, neglect, misuse or Acts of God.
If the fault is caused by reasons other than normal domestic use or use in accordance
with the owner's manual.
Faults caused by vermin, for example rats, mice etc.
Noise or vibration that is considered normal, for example, water drain sound, spin sound
or warning beeps.
Correcting the installation for example, leveling the product, adjustment of drain.
Normal maintenance recommended by the owner's manual.
Removal of foreign objects/substances from the machine including the pump and inlet
hose filter, for example, grit, nails, bra wires and buttons etc.
Replacing fuses, correcting wiring or correcting plumbing.
Correction of unauthorised repairs.
Incidental or consequential damage to personal property caused by possible defects with
this appliance.
If this product is used for commercial purposes its warranty is invalidated.
(Example: Public places such as public bathroom, lodging house, training centre,
If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the products, or the replacement of a defective part, shall be
borne by the owner.
M emo
For U.K. Customer
CUSTOMER SERVICE Tel : +44- (0) 844 847 5454
: +44- (0) 844 847 1413
LGEUK SERVICE WEB-SITE : http://uk.lge.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF