FCC Information and Copyright

FCC Information and Copyright
TP67XE Setup Man ual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features.............................................................................. 2
Rear Panel Connectors.............................................................................. 3
Motherboard Layout................................................................................. 4
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ............................................... 5
FAN Headers.............................................................................................. 7
Installing System Memory ........................................................................ 8
Connectors and Slots................................................................................ 10
3.1
3.2
How to Setup Jumpers............................................................................. 14
Detail Settings .......................................................................................... 14
4.1
4.2
4.3
Operating System.................................................................................... 20
Raid Arrays............................................................................................... 20
How RAID Works..................................................................................... 20
5.1
5.2
T-Series UEFI BIOS ................................................................................... 24
T-Series Software...................................................................................... 27
6.1
6.2
6.3
6.4
Driver Installation Note.......................................................................... 37
Extra Information.................................................................................... 38
AMI BIOS Post Code................................................................................. 39
Troubleshooting ....................................................................................... 41
Chapter 2: Hardware Installation .......................... 5
Chapter 3: Headers & Jumpers Setup .................. 14
Chapter 4: RAID Functions .................................. 20
Chapter 5: T-Series UEFI BIOS & Software........... 24
Chapter 6: Useful Help ........................................ 37
Appendix: SPEC In Other Languages ................... 42
German.................................................................................................................. 42
French .................................................................................................................... 44
Italian..................................................................................................................... 46
Spanish ................................................................................................................... 48
Portuguese ............................................................................................................ 50
Polish...................................................................................................................... 52
Russian ................................................................................................................... 54
Arabic..................................................................................................................... 56
Japanese ................................................................................................................ 58
TP6 7 X E
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 3
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
CFX Bridge X 1
SLI Bridge X 1
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
SPEC
Supports Execute Disable Bit / Enhanced Intel
Socket 1155
CPU
Intel Core i7 / i5 / i3 / Pentium / Celeron
processor
Chipset
Memory 64 Technology / Virtualization Technology /
Hyper Threading
Intel P67
IT8728
Environment Control initiatives,
Provides the most commonly used legacy
Hardware Monitor Controller
Super I/O functionality.
Fan Speed Controller
Low Pin Count Interface
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 4
Dual Channel Mode DDR3 memory module
Main
Max Memory Capacity 16GB
Supports DDR3 1066 / 1333
Memory
Each DIMM supports 512MB/
Supports DDR3 1600 (OC) / 1866 (OC) / 2133 (OC)
1GB/2GB/4GB DDR3
Registered DIMM and ECC DIMM is not supported
Super I/O
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
SATA 2 & 3 Integrated Serial ATA Controller
LAN
Sound
Codec
SATA Version 2.0 / 3.0 specification compliant
10 / 100 Mb/s / 1Gb/s auto negotiation
Realtek RTL 8111E
Half / Full duplex capability
7.1 channels audio out
ALC892
High Definition Audio
USB3.0
NEC uPD720200 / Asmedia ASM1042
Data transfer rates up to 600 MB/s
IEEE 1394
VT6315N
1394a
PCI slot
x2
Supports PCI expansion cards
PCI Express Gen2 x 16 slot
x2
Supports PCI-E Gen2 x16 expansion cards
PCI Express Gen2 x 1 slot
x2
Supports PCI-E Gen2 x1 expansion cards
SATA3 Connector
x2
Each connector supports 1 SATA3 devices
SATA2 Connector
x3
Each connector supports 1 SATA2 devices
Connectors Front Panel Connector
x1
Supports front panel facilities
Front Audio Connector
x1
Supports front panel audio function
CPU Fan Header
x1
CPU Fan power supply (with Smart Fan function)
System Fan Header
x2
System Fan Power supply
Clear CMOS Header
x1
Restore CMOS data to factory default
USB2.0 Connector
x3
Each connector supports 2 front panel USB2.0 ports
Slots
On Board
2
SpeedStep® / Intel Architecture-64 / Extended
TP6 7 X E
SPEC
Back Panel
I/O
Consumer IR Connector
x1
Supports infrared function
Serial Port Connector
x1
Connects to RS-232 Port
IEEE 1394 Connector
x1
Connects to IEEE 1394 device
S/PDIF out Connector
x1
Supports digital audio out function
Power Connector (24pin)
x1
Connects to Power supply
Power Connector (8pin)
x2
Connects to Power supply
PS/2 Keyboard
x1
Connects to PS/2 Keyboard
RCA + S/PDIF Out
x1
Provides digital audio out function
1394 Port
x1
Connects to IEEE 1394 device
eSATA Port
x1
Connect to SATA devices
LAN port
x1
Connect to RJ-45 ethernet cable
USB2.0 Port
x6
Connect to USB2.0 devices
USB3.0 Port
x2
Connect to USB3.0 devices (by NEC uPD720200 /
ASM1042) and USB2.0/USB1.X devices (by P67)
Audio Jack
Board Size
x6
244 (W) x 305 (L) mm
ATX
Biostar reserves the right to add or remove support
OS Support Windows XP / Vista / 7
1.4
for any OS with or without notice
REAR PANEL CONNECTORS
PS/2
Keyboard
USB2.0X2
RCA +
S/PDIF Out
USB2.0X2
USB2.0X2
Center
NOTE:
Provide Audio-In/Out and Mic. connection
IEEE 1394
eSATA
LAN
USB3.0X2
Line In
Rear
Line Out
Side
Mic In
USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is
controlled by NEC uPD720200 / Asmedia ASM1042, but, USB2.0/USB1.X is controlled by
P67.
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
U SB_KBMS1
ATXPWR 2
C PU_FAN1
ATXPWR3
PH8
PH7
PH6
PH5
PH4
PH3
PH2
PH1
SPDIF1
VTT_ LED2
VTT_LED1
USB2
DDR 3_B2
DDR 3_B1
CPU1
DDR 3_A2
USB_1394_
ESATA1
DDR 3_A1
Socket 1155
RJ45U SB1
AUD IO2
ATXPWR1
SYS_FAN2
PEX16_1
PEX1_1
LAN
BAT1
PEX1_2
Super
I/O
Intel
P67
SATA1
PEX16_2
SATA2
PCI1
CODEC
SATA3
JCMOS1
PCI2
JSPDIFOUT1
F_AUDIO1
J_COM1
BIOS
F_1394A1
CIR1
Note: ■ represents the 1st pin.
4
F_USB3 F_USB2 F_U SB1
SYS_FAN1
PANEL1
SW_RST1
SW_PWR1
TP6 7 X E
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.
Step 2: Remove the Pin Cap.
5
Motherboard Manual
Step 3: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.
6
TP6 7 X E
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
SYS_FAN1/SYS_FAN2: System Fan Headers
SY S_FA N2
3
1
1
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate
sense
3
SY S_FA N1
Note:
The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports
4-pin head connector. When connecting with wires onto connectors, please note that the
red wire is the positive and should be connected to pin#2, and the black wire is Ground
and should be connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
8
DDR3_B1
DDR3_B2
DDR3_A1
DDR3_A2
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
TP6 7 X E
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB
DDR3_A2
512MB/1GB/2GB/4GB
DDR3_B1
512MB/1GB/2GB/4GB
DDR3_B2
512MB/1GB/2GB/4GB
Total Memory
Size
Max is 16GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
X
O
X
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
Note:
Memory module must be installed in DDR3-A2 or DDR3-B2 to boot the
system.
9
Motherboard Manual
2.4
CONNECTORS AND SLOTS
SATA1: Serial ATA3 Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA3 interface,
it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
Pin
1
2
3
4
5
6
7
Assignment
Ground
TX+
TXGround
RXRX+
Ground
SATA2/3: Serial ATA2 Connectors
The motherboard has a PCI to SATA Controller with 3 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA2
Pin
1
2
3
4
5
6
7
SATA3
7
10
4
1
Assignment
Ground
TX+
TXGround
RXRX+
Ground
TP6 7 X E
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.
PEX16_2: PCI-Express Gen2 x8 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, for an aggregate of 8GB/s totally.
PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth over the traditional PCI architecture.
PEX16_1
PEX1_1
PEX1_2
PEX16_2
11
Motherboard Manual
PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
ATXPWR2/3: ATX Power Source Connectors
These connectors provide +12V to CPU power circuit. If the CPU power plug is
4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2/3.
ATXP WR2
8
5
8
1
4
4
ATX PWR3
5
Pin
1
2
3
4
5
6
7
8
Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground
1
Note:
Generally, any of ATXPWR2 and ATXPWR3 can be plugged. When system is
overclocked, it is recommended to plug in both ATXPWR2 and ATXPWR3 for stability.
12
TP6 7 X E
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
Note:
Before you power on the system, please make sure that ATXPWR1 ~ ATXPWR3
connectors have been well plugged-in.
13
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW_LED
On/Off
+ + -
9
1
16
8
+ SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
14
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
TP6 7 X E
F_USB1/F_USB2/F_USB3: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ USB3 F_ USB1
F_USB2
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
TPA1+
TPA1GND
GND
TPB1+
TPB1VCC
VCC
N/A
KEY
F_1394A1: IEEE 1394 Header
This header allows user to connect IEEE 1394 device.
2
10
1
9
15
Motherboard Manual
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
1
16
3
Assignment
+5V
SPDIF_OUT
Ground
TP6 7 X E
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
1
3
Pin 2-3 Close:
Clear CMOS data.
1
3
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
17
Motherboard Manual
On-Board LED Indicators
There are 12 LED indicators on the motherboard showing system status.
PH8
PH7
PH6
PH5
PH4
PH3
PH2
PH1
VTT_LED2
VTT_LED1
PH1 ~ PH8 / VTT_LED1 ~ VTT_LED2: Power Status Indicators
Please refer to the tables below for specific messages:
PH1~PH8
VTT_LED1~VTT_LED2
ON
OFF
Phase Indicator
Phase Active
Phase Inactive
On-Board Buttons
There are 2 on-board buttons.
SW_PWR1
SW_RST1
SW_RST1: Reset button.
SW_PWR1: Power Switch button.
18
TP6 7 X E
BIOS POST Code/CPU Temperature Indicator
This indicator will show POST code while booting. After the booting sequence,
it will show current CPU temperature through hexadecimal figure. Please
refer to Chapter 6.3 for all the BIOS POST codes.
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
2 6
1 5
19
Motherboard Manual
CHAPTER 4: RAID FUNCTIONS
4.1
OPERATING SYSTEM
Supports Windows Vista and Windows 7.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
4.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
20
Block 2
Block 4
Block 6
TP6 7 X E
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
21
Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
22
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
TP6 7 X E
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
23
Motherboard Manual
CHAPTER 5: T-SERIES UEFI BIOS & SOFTWARE
5.1
T-SERIES UEFI BIOS
T-Series UEFI BIOS Features
Overclocking Navigator Engine (O.N.E.)
Self Recovery System (S.R.S)
Smart Fan Function
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive
!! WARNING !!
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below
in this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this
manual. For further information of setting up the UEFI BIOS,
please refer to the UEFI BIOS Manual in the Setup CD.
A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual CPU System, Manual Memory System, Manual PWM
System, and Manual Voltage System.
Main
Advanced
Chipset
BIOS SETUP UTILITY
Boot
Security
O.N.E
Notice: Please Clear CMOS if system no display
after overclocking
Start Page
[Page - Main]
====Manual CPU system====
Fixed CPU Ratio
CPU Ratio
CPU Base Clock(1/100 MHZ)
CPU Core Current Max(Amp)
Power Limit 1 Value (Watt)
Power Limit 2 Switch
Power Limit 2 Value
Enhanced Intel SpeedStep Tech
Turbo Mode
1 Core Ratio Limit
2 Core Ratio Limit
3 Core Ratio Limit
4 Core Ratio Limit
CPU C1E
[Disabled]
28
10000
150
95
[Enabled]
118
[Enabled]
[Enabled]
31
30
30
29
[Enabled]
Save & Exit
Start Page help
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Notice:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
24
TP6 7 X E
NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.
C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
Main
>
>
>
>
>
>
>
>
Advanced
Chipset
BIOS SETUP UTILITY
Boot
Security
O.N.E
PCI Subsystem Settings
ACPI Settings/WakeUp Event control
CPU Configuration
SATA Configuration
USB Configuration
SMART FAN Control
Super IO Configuration
H/W Monitor
Save & Exit
SMART FAN Control
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
↓
25
Motherboard Manual
Advanced
BIOS SETUP UTILITY
SMART FAN Control
CPU Smart FAN
> CPU FAN Calibrate
Control Mode
FAN Ctrl OFF(oC)
FAN Ctrl ON( oC)
FAN Ctrl Start value
FAN Ctrl Sensitive
[Disabled]
CPU FAN Smart control
function. [Disabled]: Full ON
[Auto]:By parameters below.
[Manual]
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
CPU Smart FAN
This item allows you to control the CPU Smart Fan function.
CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~127, with
an interval of 1.
Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
0~127, with an interval of 1.
26
TP6 7 X E
5.2
T-SERIES SOFTWARE
Installing T-Series Software
1. Insert the Setup CD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching T-Series Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status. This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)
27
Motherboard Manual
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:
28
TP6 7 X E
3 Pre-set Modes: V6, V12, AUTO for different overclocking experience.
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
29
Motherboard Manual
Pressing TOVERCLOCKER logo
displays information about
manufacturer and software version.
You can update current version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto P hase Mode
Reset Time &
Consumption
Display CPU
information
30
TP6 7 X E
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
31
Motherboard Manual
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.
This block will show
the information which
would be collect ed in
the mail.
condition
* Describe
of your system.
your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
32
TP6 7 X E
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
33
Motherboard Manual
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
Clear CMOS function
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
34
AMI BIOS
TP6 7 X E
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.
35
Motherboard Manual
BIOScreen Utility (Optional)
This utility allows you to personalize your boot logo easily. You can choose
JPG or BMP as your boot logo so as to customize your computer.
Please follow the following instructions to update boo logo:
1. Load Image:Choose the picture as the boot logo.
2. Transform:Transform the picture for BIOS and preview the result.
3. Update Bios:Write the picture to BIOS Memory to complete the update.
36
TP6 7 X E
CHAPTER 6: USEFUL HELP
6.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
37
Motherboard Manual
6.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
38
TP6 7 X E
6.3
AMI BIOS POST CODE
Checkpoint
03
04
05
06
07
08
C0
C1
C2
C5
C6
C7
0A
0B
0C
0E
13
20
24
2A
2C
2E
31
33
Description
Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS,
POST, Runtime data area. Also initialize BIOS modules on POST entry and
GPNV area. Initialized CMOS as mentioned in the Kernel Variable
"wCMOSFlags."
Check CMOS diagnostic byte to determine if battery power is OK and
CMOS checksum is OK. Verify CMOS checksum manually by reading
storage area. If the CMOS checksum is bad, update CMOS with power-on
default values and clear passwords. Initialize status register A.
Initializes data variables that are based on CMOS setup questions.
Initializes both the 8259 compatible PICs in the system
Initializes the interrupt controlling hardware (generally PIC) and interrupt
vector table.
Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the
POSTINT1Ch handler. Enable IRQ-0 in PIC for system timer interrupt.
Traps INT1Ch vector to "POSTINT1ChHandlerBlock."
Fixes CPU POST interface calling pointer.
Initializes the CPU. The BAT test is being done on KBC. Program the
keyboard controller command byte is being done after Auto detection of
KB/MS using AMI KB-5.
Early CPU Init Start -- Disable Cache – Init Local APIC.
Set up boot strap processor Information.
Set up boot strap processor for POST.
Enumerate and set up application processors.
Re-enable cache for boot strap processor.
Early CPU Init Exit.
Initializes the 8042 compatible Key Board Controller.
Detects the presence of PS/2 mouse.
Detects the presence of Keyboard in KBC port.
Testing and initialization of different Input Devices. Also, update the Kernel
Variables.
Traps the INT09h vector, so that the POST INT09h handler gets control for
IRQ1. Uncompress all available language, BIOS logo, and Silent logo
modules.
Early POST initialization of chipset registers.
Relocate System Management Interrupt vector for all CPU in the system.
Uncompress and initialize any platform specific BIOS modules. GPNV is
initialized at this checkpoint.
Initializes different devices through DIM.
See DIM Code Checkpoints section of document for more information.
Initializes different devices. Detects and initializes the video adapter
installed in the system that have optional ROMs.
Initializes all the output devices.
Allocate memory for ADM module and uncompress it. Give control to ADM
module for initialization. Initialize language and font modules for ADM.
Activate ADM module.
Initializes the silent boot module. Set the window for displaying text
information.
39
Motherboard Manual
Checkpoint
37
38
39
3A
3B
3C
40
52
60
75
78
7C
84
85
87
8C
8D
8E
90
A1
A2
A4
A7
A9
AA
AB
AC
B1
00
40
Description
Displaying sign-on message, CPU information, setup key message, and any
OEM specific information.
Initializes different devices through DIM. See DIM Code Checkpoints section
of document for more information. USB controllers are initialized at this
point.
Initializes DMAC-1 & DMAC-2.
Initialize RTC date/time.
Test for total memory installed in the system. Also, Check for DEL or ESC
keys to limit memory test. Display total memory in the system.
Mid POST initialization of chipset registers.
Detect different devices (Parallel ports, serial ports, and coprocessor in
CPU, etc.) successfully installed in the system and update the BDA,
EBDA…etc.
Updates CMOS memory size from memory found in memory test. Allocates
memory for Extended BIOS Data Area from base memory. Programming the
memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
Initializes NUM-LOCK status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested. Check boot password if installed.
Late POST initialization of chipset registers.
Build ACPI tables (if ACPI is supported).
Program the peripheral parameters. Enable/Disable NMI as selected.
Initialization of system management interrupt by invoking all handlers.
Please note this checkpoint comes right after checkpoint 20h.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill the
free area in F000h segment with 0FFh. Initializes the Microsoft IRQ Routing
Table. Prepares the runtime language module. Disables the system
configuration display if needed.
Initialize runtime language module. Display boot option popup menu.
Displays the system configuration screen if enabled. Initialize the CPU’s
before boot, which includes the programming of the MTRR’s.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector.
Prepare BBS for Int 19 boot. Init MP tables.
End of POST initialization of chipset registers. De-initializes the ADM
module.
Save system context for ACPI. Prepare CPU for OS boot including final
MTRR values.
Passes control to OS Loader (typically INT19h).
TP6 7 X E
6.4
TROUBLESHOOTING
Probable
1.
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
Solution
1.
2.
3.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
System only boots from an optical
files.
drive. Hard disks can be read,
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
41
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Unterstützt Execute Disable Bit / Enhanced Intel
Socket 1155
SpeedStep® / Intel Architecture-64 / Extended
CPU
Intel Core i7 / i5 / i3 / Pentium / Celeron
Memory 64 Technology / Virtualization Technology /
Prozessoren
Hyper Threading
Chipsatz
Intel P67
IT8728
Umgebungskontrolle,
Bietet die häufig verwendeten alten Super Hardware-Überwachung
Super E/A
E/A-Funktionen.
Lüfterdrehzahl-Controller/-Überwachung
Low Pin Count-Schnittstelle
"Smart Guardian"-Funktion von ITE
Dual-Kanal DDR3 Speichermodul
DDR3 DIMM-Steckplätze x 4
Unterstützt DDR3 1066 / 1333
Arbeitsspeich Max. 16GB Arbeitsspeicher
er
Unterstützt DDR3 1600(OC) / 1866(OC) / 2133(OC)
Jeder DIMM unterstützt 512MB/
registrierte DIMMs. ECC DIMMs werden nicht
1GB/2GB/4GB DDR3.
unterstützt.
Datentransferrate bis zu 3.0Gb/s / 6.0Gb/s.
SATA 2 & 3
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 2.0 / 3.0
10 / 100 / 1000 Mb/s Auto-Negotiation
LAN
Realtek RTL 8111E
Halb-/ Vollduplex-Funktion
HD
Unterstützt High-Definition Audio
Audio-Unters ALC892
7.1-Kanal-Audioausgabe
tützung
USB3.0
NEC uPD720200 / Asmedia ASM1042
Datenübertragungsraten bis zu 600 MB / s
IEEE 1394
VT6315N
1394a
Steckplätze
42
PCI-Steckplatz
x2
PCI Express Gen2 x16 Steckplatz
x2
PCI Express Gen2 x 1-Steckplatz
x2
TP6 7 X E
Spezifikationen
SATA3-Anschluss
x2
Jeder Anschluss unterstützt 1 SATA3-Laufwerk
SATA2-Anschluss
x3
Jeder Anschluss unterstützt 1 SATA2-Laufwerk
Fronttafelanschluss
x1
Unterstützt die Fronttafelfunktionen
Front-Audioanschluss
x1
Unterstützt die Fronttafel-Audioanschlussfunktion
CPU-Lüfter-Sockel
x1
CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Sockel
x2
Onboard-Ans "CMOS löschen"-Sockel
x1
chluss
x3
USB2.0-Anschluss
System-Lüfter-Stromversorgungsanschluss
Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse
Verbraucher-IR Anschluss
x1
Serieller Anschluss
x1
IEEE 1394-Anschluss
x1
S/PDIF Ausgangsanschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (8-polig)
x2
PS/2-Tastatur
x1
RCA + S/PDIF Heraus
x1
1394-Anschluss
x1
eSATA Anschluss
x1
LAN-Anschluss
x1
USB2.0-Anschluss
x6
USB3.0-Anschluss
x2
Unterstützt die digitale Audioausgabefunktion
Rückseiten-E
/A
USB3.0 Geräte (durch NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X Geräte (durch P67)
Audioanschluss
Platinengröße 244 mm (B) X 305 mm (L)
x6
ATX
Biostar behält sich das Recht vor, ohne Ankündigung
OS-Unterstüt
zung
Windows XP / Vista / 7
die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.
43
Motherboard Manual
FRENCH
SPEC
Prend en charge les technologies d'exécution de bit
Socket 1155
UC
de désactivation / Intel SpeedStep® optimisée/
Processeurs Intel Core i7 / i5 / i3 / Pentium /
d'architecture Intel 64 / de mémoire étendue 64 / de
Celeron
virtualisation / Hyper Threading
Chipset
Super E/S
Intel P67
IT8728
Initiatives de contrôle environnementales,
Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Contrôleur /moniteur de vitesse de ventilateur
Interface à faible compte de broches
Fonction "Gardien intelligent" de l'ITE
Module de mémoire DDR3 à mode à double voie
Fentes DDR3 DIMM x 4
Prend en charge la DDR3 1066 / 1333
Mémoire
Capacité mémoire maximale de 16 Go
Prend en charge la DDR3 1600 (OC) / 1866 (OC) /
principale
Chaque DIMM prend en charge des DDR3 de 2133 (OC)
Les DIMM à registres et DIMM avec code correcteurs
512Mo/1Go/2Go/4Go
d'erreurs ne sont pas prises en charge
Taux de transfert jusqu'à 3.0Go/s / 6.0Go/s.
SATA 2 & 3 Contrôleur Serial ATA intégré :
Conforme à la spécification SATA Version 2.0 / 3.0
LAN
10 / 100 / 1000 Mb/s négociation automatique
Realtek RTL 8111E
Half / Full duplex capability
Prise en
charge
Prise en charge de l'audio haute définition
ALC892
Sortie audio à 7.1 voies
audio HD
USB3.0
NEC uPD720200 / Asmedia ASM1042
Taux de transfert de données jusqu'à 600 Mo / s
IEEE 1394
VT6315N
1394a
Fentes
44
Fente PCI
x2
Fente PCI Express Gen2 x16
x2
Fente PCI Express Gen2 x1
x2
TP6 7 X E
SPEC
x2
Connecteur SATA2
x3
Connecteur du panneau avant
x1
Prend en charge les équipements du panneau avant
Connecteur Audio du panneau avant x1
Prend en charge la fonction audio du panneau avant
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Connecteur USB2.0
x3
Connecteur
embarqué
Chaque connecteur prend en charge 1 périphérique
Connecteur SATA3
SATA3
Chaque connecteur prend en charge 1 périphérique
SATA2
Alimentation électrique du ventilateur UC (avec
fonction de ventilateur intelligent)
Alimentation électrique du ventilateur système
Chaque connecteur prend en charge 2 ports USB2.0
de panneau avant
Connecteur de IR du consommateur x1
Port série
x1
Connecteur IEEE 1394
x1
Connecteur de sortie S/PDIF
x1
Connecteur d'alimentation
x1
Prend en charge la fonction de sortie audio
numérique
(24 broches)
Connecteur d'alimentation
x2
(8 broches)
Clavier PS/2
x1
RCA + Sortie S/PDIF
x1
Port 1394
x1
E/S du
Port eSATA
x1
panneau
Port LAN
x1
arrière
Port USB2.0
x6
Port USB3.0
x2
USB3.0 dispositifs (par NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X dispositifs (par P67)
Fiche audio
Dimensions
244 mm (l) X 305 mm (H)
x6
ATX
de la carte
Support SE Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de supprimer
le support de SE avec ou sans préavis
45
Motherboard Manual
ITALIAN
SPECIFICA
Supporto di Execute Disable Bit / Enhanced
Socket 1155
CPU
Intel SpeedStep® / Architettura Intel 64 /
Processore Intel Core i7 / i5 / i3 /
Tecnologia Extended Memory 64 / Tecnologia
Pentium / Celeron
Virtualization / Hyper Threading
Chipset
Intel P67
Funzioni di controllo dell’ambiente:
IT8728
Super I/O
Fornisce le funzionalità legacy Super I/O Monitoraggio hardware
usate più comunemente.
Controller / Monitoraggio velocità ventolina
Interfaccia LPC (Low Pin Count)
Funzione "Smart Guardian" di ITE
Modulo di memoria DDR3 a canale doppio
Memoria
principale
Alloggi DIMM DDR3 x 4
Supporto di DDR3 1066 / 1333
Capacità massima della memoria 16GB
Supporto di DDR3 1600 (OC) / 1866 (OC) /
Ciascun DIMM supporta DDR3
2133 (OC)
512MB/1GB/2GB/4GB
DIMM registrati e DIMM ECC non sono
supportati
Velocità di trasferimento dei dati fino a 3.0Gb/s
SATA 2 & 3 Controller Serial ATA integrato
/ 6.0Gb/s.
Compatibile specifiche SATA Versione 2.0/3.0
LAN
Negoziazione automatica 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacità Half / Full Duplex
Supporto audio High-Definition (HD)
Supporto
audio HD
ALC892
Uscita audio 7.1 canali
USB3.0
NEC uPD720200 / Asmedia ASM1042
Velocità di trasferimento dati fino a 600 MB / s
IEEE 1394
VT6315N
1394a
Alloggio PCI
Alloggi
Alloggio PCI Express Gen2 x16 x2
Alloggio PCI Express Gen2 x1
46
x2
x2
TP6 7 X E
SPECIFICA
Connettori
su scheda
Connettore SATA3
x2
Ciascun connettore supporta 1 unità SATA3
Connettore SATA2
x3
Ciascun connettore supporta 1 unità SATA2
Connettore pannello frontale
x1
Supporta i servizi del pannello frontale
Connettore audio frontale
x1
Supporta la funzione audio pannello frontale
Collettore ventolina CPU
x1
Collettore ventolina sistema
x2
Collettore cancellaz ione CMOS
x1
Connettore USB2.0
x3
Alimentazione ventolina CPU (con funzione
Smart Fan)
Alimentazione ventolina di sistema
Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Connettore IR del consumatore x1
Porta seriale
x1
Connettore IEEE 1394
x1
Connettore output S/PDIF
x1
Connettore alimentazione
x1
Supporta la funzione d’output audio digitale
(24 pin)
Connettore alimentazione
x2
(8 pin)
Tastiera PS/2
x1
RCA + S/PDIF Fuori
x1
Porta 1394
x1
I/O
Porta eSATA
x1
pannello
Porta LAN
x1
Porta USB2.0
x6
Porta USB3.0
x2
posteriore
USB3.0 dispositivi (da NEC uPD720200 /
ASM1042) USB2.0/USB1.X dispositivi (da P67)
Connettore audio
Dimension
i scheda
244 mm (larghezza) x 305 mm
(altezza)
supportati
ATX
Biostar si riserva il diritto di aggiungere o
Sistemi
operativi
x6
Windows XP / Vista / 7
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
47
Motherboard Manual
SPANISH
Especificación
Admite Bit de deshabilitación de ejecución / Intel
Socket 1155
CPU
SpeedStep® Mejorado / Intel Architecture-64 /
Procesador Intel Core i7 / i5 / i3 / Pentium /
Tecnología Extended Memory 64 / Tecnología de
Celeron
virtualización / Hyper Threading
Conjunto de
chips
Súper E/S
Intel P67
IT8728
Iniciativas de control de entorno,
Le ofrece las funcionalidades heredadas de
Monitor hardware
uso más común Súper E/S.
Controlador/monitor de velocidad de ventilador
Interfaz de cuenta Low Pin
Función "Guardia inteligente" de ITE
Módulo de memoria DDR3 de canal Doble
Ranuras DIMM DDR3 x 4
Admite DDR3 de 1066 / 1333
Memoria
Capacidad máxima de memoria de 16GB
principal
Cada DIMM admite DDR de
Admite DDR3 de 1600(OC) / 1866(OC) / 2133(OC)
No admite DIMM registrados o DIMM compatibles
512MB/1GB/2GB/4GB
con ECC
Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s.
SATA 2 & 3 Controlador ATA Serie Integrado
Compatible con la versión SATA 2.0 / 3.0.
Red Local
Negociación de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Funciones Half / Full dúplex
Soporte de sonido de Alta Definición
Soporte de
sonido HD
ALC892
Salida de sonido de 7.1 canales
USB3.0
NEC uPD720200 / Asmedia ASM1042
Tasas de transferencia de datos hasta 600 MB / s
IEEE 1394
VT6315N
1394a
Ranuras
48
Ranura PCI
X2
Ranura PCI Express Gen2 x16
X2
Ranura PCI Express Gen2 x 1
X2
TP6 7 X E
Especificación
Conector SATA3
X2
Cada conector soporta 1 dispositivos SATA3
Conector SATA2
X3
Cada conector soporta 1 dispositivos SATA2
Conector de panel frontal
X1
Soporta instalaciones en el panel frontal
Conector de sonido frontal
X1
Soporta funciones de sonido en el panel frontal
Cabecera de ventilador de CPU
X1
Fuente de alimentación de ventilador de CPU (con
función Smart Fan)
Cabecera de ventilador de sistema X2
Conectores
en placa
Cabecera de borrado de CMOS
X1
Conector USB2.0
X3
Conector de IR del consumidor
X1
Puerto serie
X1
Cabecera IEEE 1394
x1
Conector de salida S/PDIF
X1
Conector de alimentación
X1
Fuente de alimentación de ventilador de sistema
Cada conector soporta 2 puertos USB2.0 frontales
Soporta función de salida de sonido digital
(24 patillas)
Conector de alimentación
X2
(8 patillas)
Teclado PS/2
X1
RCA + Salida S/PDIF
x1
Puerto 1394
x1
Panel
Puerto eSATA
X1
trasero de
Puerto de red local
X1
E/S
Puerto USB2.0
X6
Puerto USB3.0
X2
USB3.0 dispositivos (por NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X dispositivos (por P67)
Conector de sonido
Tamaño de
la placa
244 mm. (A) X 305 Mm. (H)
Soporte de
sistema
operativo
Windows XP / Vista / 7
X6
ATX
Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.
49
Motherboard Manual
PORTUGUESE
ESPECIFICAÇÕES
Suporta as tecnologias Execute Disable Bit /
Socket 1155
CPU
Processador Intel Core i7 / i5 / i3 / Pentium /
Celeron
Chipset
o Super I/O
/ Extended Memory 64 / Virtualization / Hyper
Threading
Intel P67
IT8728
Especificaçã
Enhanced Intel SpeedStep® / Intel Arquitecture -64
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
utilizadas em termos da especificação Super
I/O.
Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Módulo de memória DDR3 de canal duplo
Ranhuras DIMM DDR3 x 4
Suporta módulos DDR3 1066 / 1333
Memória
Capacidade máxima de memória: 16 GB
Suporta módulos DDR3 1600 (OC) / 1866 (OC) /
principal
Cada módulo DIMM suporta uma memória
2133 (OC)
DDR3 de 512MB/ 1GB/2GB/4GB
Os módulos DIMM registados e os DIMM ECC não
são suportados
Velocidades de transmissão de dados até 3.0 Gb/s /
6.0 Gb/s.
SATA 2 & 3 Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão
2.0 / 3.0.
LAN
Auto negociação de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacidade semi/full-duplex
Suporte
para áudio
de alta
Suporta a especificação High-Definition Audio
ALC892
Saída de áudio de 7.1 canais
definição
USB3.0
NEC uPD720200 / Asmedia ASM1042
Taxas de transferência de dados até 600 MB / s
IEEE 1394
VT6315N
1394a
Ranhuras
50
Ranhura PCI
x2
Ranhura PCI Express Gen2 x16
x2
Ranhura PCI Express Gen2 x 1
x2
TP6 7 X E
ESPECIFICAÇÕES
Conectores
na placa
Conector SATA3
x2
Cada conector suporta 1 dispositivo SATA3
Conector SATA2
x3
Cada conector suporta 1 dispositivo SATA2
Conector do painel frontal
x1
Para suporte de várias funções no painel frontal
Conector de áudio frontal
x1
Suporta a função de áudio no painel frontal
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector USB2.0
x3
Conector de IR do consumidor
x1
Porta série
x1
Conector IEEE 1394
x1
Conector de saída S/PDIF
x1
Conector de alimentação
x1
Alimentação da ventoinha da CPU (com a função
Smart Fan)
Alimentação da ventoinha do sistema
Cada conector suporta 2 portas USB2.0 no painel
frontal
Suporta a saída de áudio digital
(24 pinos)
Conector de alimentação
x2
(8 pinos)
Entradas/S
aídas no
painel
traseiro
Teclado PS/2
x1
RCA + Saída S/PDIF
x1
Porta 1394
x1
Porta eSATA
x1
Porta LAN
x1
Porta USB2.0
x6
Porta USB3.0
x2
USB3.0 dispositivos (por NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X dispositivos (por P67)
Tomada de áudio
Tamanho
da placa
244 mm (L) X 305 mm (A)
Sistemas
operativos
suportados
x6
ATX
A Biostar reserva-se o direito de adicionar ou
Windows XP / Vista / 7
remover suporte para qualquer sistema operativo
com ou sem aviso prévio.
51
Motherboard Manual
POLISH
SPEC
Obsługa Execute Disable Bit / Enhanced Intel
Socket 1155
Procesor
SpeedStep® / Intel Architecture-64 / Extended
Procesor Intel Core i7 / i5 / i3 / Pentium /
Memory 64 Technology / Virtualization Technology /
Celeron
Hyper Threading
Chipset
Intel P67
Gniazda DDR3 DIMM x 4
Moduł pamięci DDR3 z trybem podwójnego kanału
Pamięć
Maks. wielkość pamięci 16GB
Obsługa DDR3 1066 / 1333
główna
Każde gniazdo DIMM obsługuje moduły
Obsługa DDR3 1600 (OC) / 1866 (OC) / 2133 (OC)
512MB/1GB/2GB/4GB DDR3
Brak obsługi Registered DIMM oraz ECC DIMM
IT8728
Funkcje kontroli warunków pracy,
Zapewnia najbardziej powszechne funkcje
Monitor H/W
Super I/O.
Kontroler/Monitor prędkości wentylatora
Interfejs Low Pin Count
Funkcja ITE "Smart Guardian"
Super I/O
Transfer danych do 3.0 Gb/s / 6.0 Gb/s.
SATA 2 & 3 Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 2.0 / 3.0.
10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN
Realtek RTL 8111E
szybkości
Działanie w trybie połowicznego / pełnego dupleksu
Obsługa High-Definition Audio
Obsługa
audio HD
ALC892
7.1 kanałowe wyjście audio
USB3.0
NEC uPD720200 / Asmedia ASM1042
Cena transferu danych do 600 MB / s
IEEE 1394
VT6315N
1394a
Gniazda
52
Gniazdo PCI
x2
Gniazdo PCI Express Gen2 x16
x2
Gniazdo PCI Express Gen2 x 1
x2
TP6 7 X E
SPEC
Złącze SATA3
x2
Każde złącze obsługuje 1 urządzenie SATA3
Złącze SATA2
x3
Każde złącze obsługuje 1 urządzenie SATA2
Złącze panela przedniego
x1
Obsługa elementów panela przedniego
Przednie złącze audio
x1
Obsługa funkcji audio na panelu przednim
Złącze główkowe wentylatora
procesora
Zasilanie wentylatora procesora (z funkcją Smart
x1
Złącze główkowe wentylatora
Złącza
wbudowane
Back Panel
I/O
systemowego
x2
Fan)
Zasilanie wentylatora systemowego
Złącze główkowe kasowania CMOS x1
Złącze USB2.0
x3
Złącze Konsument IR
x1
Port szeregowy
x1
Złącze IEEE 1394
x1
Złącze wyjścia S/PDIF
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (8 pinowe)
x2
Klawiatura PS/2
x1
RCA + wyjścia S/PDIF
x1
Port 1394
x1
Port eSATA
x1
Port LAN
x1
Port USB2.0
x6
Port USB3.0
x2
Każde złącze obsługuje 2 porty USB2.0 na panelu
przednim
Obsługa funkcji cyfrowego wyjścia audio
USB3.0 urządzeń (przez NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X urządzeń (przez P67)
Gniazdo audio
Wymiary
płyty
244 mm (S) X 305 mm (W)
Obsluga
systemu
operacyjne
go
x6
ATX
Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
53
Motherboard Manual
RUSSIAN
СПЕЦ
CPU
(центральн
ый
процессор)
Набор
микросхем
Поддержка технологий Execute Disable Bit /
Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /
Celeron
/ Extended Memory 64 Technology / технологии
виртуализация / Hyper Threading
Intel P67
Модуль памяти с двухканальным режимом DDR3
Слоты DDR3 DIMM x 4
Основная
Максимальная ёмкость памяти 16 ГБ
память
Каждый модуль DIMM поддерживает
512МБ/1ГБ/2ГБ/4ГБ DDR3
Super I/O
Enhanced Intel SpeedStep® / Intel Architecture-64
Поддержка DDR3 1066 / 1333
Поддержка DDR3 1600(OC) / 1866(OC) / 2133(OC)
Не поддерживает зарегистрированные модули
DIMM and ECC DIMM
IT8728
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Регулятор скорости вентилятора/ монитор
возможности Super I/O.
Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
SATA 2 & 3
Локальная
сеть
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 3.0 гигабит/с /
6.0 гигабит/с.
Соответствие спецификации SATA версия 2.0/3.0
Автоматическое согласование 10 / 100 / 1000
Realtek RTL 8111E
Мб/с
Частичная / полная дуплексная способность
Звуковая
поддержка
жесткого
Звуковая поддержка High-Definition
ALC892
7.1канальный звуковой выход
диска
USB3.0
NEC uPD720200 / Asmedia ASM1042
скорости передачи данных до 600 МБ / с
IEEE 1394
VT6315N
1394a
Слоты
54
Слот PCI
x2
Слот PCI Express Gen2 x16
x2
Слот PCI Express Gen2 x 1
x2
TP6 7 X E
СПЕЦ
Разъём SATA3
x2
Каждый разъём поддерживает 1 устройство SATA3
Разъём SATA2
x3
Каждый разъём поддерживает 1 устройство SATA2
Разъём на лицевой панели
x1
Поддержка устройств на лицевой панели
Входной звуковой разъём
x1
Источник питания для вентилятора центрального
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
Встроенны вентилятора системы
й разъём
Задняя
панель
средств
ввода-выв
Поддержка звуковых функций на лицевой
панели
x2
процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы
Открытое контактирующее
приспособление CMOS
x1
USB2.0-разъём
x3
Разъём едока ИКЫЙ
x1
Последовательный порт
x1
IEEE 1394-разъём
x1
Разъём вывода для S/PDIF
x1
Разъем питания (24 вывод)
x1
Разъем питания (8 вывод)
x2
Клавиатура PS/2
x1
RCA + вывода для S/PDIF
x1
1394-порт
x1
eSATA порт
x1
Порт LAN
x1
USB2.0-порт
x6
USB3.0-порт
x2
ода
Каждый разъём поддерживает 2 USB2.0-порта на
лицевой панели
Поддержка вывода цифровой звуковой функции
USB3.0 устройств (по NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.X устройств (по P67)
Гнездо для подключения
наушников
Размер
244 мм (Ш) X 305 мм (В)
x6
ATX
панели
Поддержка
OS
Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7
удалять средства обеспечения для OS с или без
предварительного уведомления.
55
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت‬
‫‪Socket 1155‬‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰیﺔ‬
‫‪SpeedStep® / Intel Architecture-64 / Extended‬‬
‫‪Intel Core i7 / i5 / i3 / Pentium /‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Memory 64 Technology / Virtualization Technology /‬‬
‫ﺑﺘﺮدد یﺼﻞ إﻟﻰ ‪Celeron‬‬
‫‪Hyper Threading‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ ‪Intel P67‬‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻋﺪد‪4‬‬
‫ﺳﻌﺎت ‪ 1333 / 1066‬ﻣﻴﺠﺎ ﺑﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ‪ 1866 (OC) / 2133‬ﺳ ﻌﺎت ‪ DDR3‬ﻧ ﻮع ﻣﻦ اﻟﺬاآﺮة ﺗ ﺪﻋﻢ‬
‫ﻣﻴﺠﺎ ﺑﺎیﺖ و‪ /512 /1‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺑﺎی ﺖ ﻣﻴﺠ ﺎ )‪(OC) / 1600(OC‬‬
‫و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺑﺎیﺖ‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫‪IT8728‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪ Super I/O‬اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ / 6.0‬ﺛﺎﻧﻴ ﺔ‪/‬ﺝﻴﺠﺎﺑ ﺖ ‪ 3.0‬إﻟ ﻰ ﺗﺼ ﻞ ﺑﺴ ﺮﻋﺎت اﻟﺒﻴﺎﻧ‬
‫‪ SATA 2 & 3‬ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫ﺎت ﻧﻘ ﻞ‬
‫‪.‬ﺛﺎﻧﻴ ﺔ‪/‬ﺝﻴﺠﺎﺑ ﺖ‬
‫‪ 2.0 / 3.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ ‪Realtek RTL 8111E‬‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫اﻟﺘﻌﺮیﻒ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫‪ALC892‬‬
‫‪ 7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫‪NEC uPD720200 / Asmedia ASM1042 USB3.0‬‬
‫‪VT6315N IEEE 1394‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫اﻟﻔﺘﺤﺎت ﻓﺘﺤﺔ‪PCI Express x16 Gen2‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x 1‬‬
‫ﺛﺎﻧﻴ ﺔ ‪ /‬ﺑﺎی ﺖ ﻣﻴﻐ ﺎ ‪ 600‬إﻟ ﻰ ﺗﺼ ﻞ ﺑﻴﺎﻧ ﺎت ﻧﻘ ﻞ ﻣﻌﺪﻻت‬
‫‪1394a‬‬
‫ﻋﺪد ‪2‬‬
‫ﻋﺪد‪2‬‬
‫ﻋﺪد ‪2‬‬
‫‪56‬‬
‫‪TP6 7 X E‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫ﻣﻨﻔﺬ ‪SATA3‬‬
‫ﻋﺪد ‪2‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA3‬‬
‫ﻣﻨﻔﺬ ‪SATA2‬‬
‫ﻋﺪد ‪3‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ واﺣﺪ ﻣﻦ أﺝﻬﺰة ‪SATA2‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ ‪Smart Fan‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪2‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫اﻟﻠﻮﺣﺔ ﻣﻨﻔﺬ ‪USB2.0‬‬
‫ﻣﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻋﺪد ‪3‬‬
‫ﻣﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ‪IEEE 1394‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪8‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪2‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺗﻴﺢ ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫‪RCA+ S/PDIF Out‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪1394‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ‪eSATA‬‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪6‬‬
‫ﻣﻨﺎﻓﺬ ‪USB3.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪6‬‬
‫یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫یﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬
‫) ﻗﺒ ﻞ ﻣﻦ ‪(NEC uPD720200 / Asmedia ASM1042‬‬
‫‪USB3.0‬ﻷﺝﻬﺰةا‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ ‪ 244‬ﻣﻢ )ﻋﺮض( ‪ 305 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫‪USB2.0/USB1.X‬اﻷﺝﻬﺰة ) ﻗﺒ ﻞ ﻣﻦ ‪(P67‬‬
‫‪ATX‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪Windows XP / Vista / 7‬‬
‫ﺑﺪون إﺥﻄﺎر‪.‬‬
‫‪57‬‬
Motherboard Manual
JAPANESE
仕様
Execute Disable Bit / Enhanced Intel SpeedStep® /
Socket 1155
CPU
Intel Architecture-64 / Extended Memory 64
Intel Core i7 / i5 / i3 / Pentium / Celeron プロ
Technology / Virtualization Technology / Hyper
セッサ
Threadingをサポートします
チップセット Intel P67
DDR3 DIMMスロット x 4
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量16GB
DDR3 1066 / 1333 をサポート
メインメモリ
各DIMMは 512MB/1GB/2GB/4GB DDR3をサ DDR3 1600(OC) / 1866(OC) / 2133(OC) をサポート
Super I/O
ポート
登録済みDIMMとECC DIMMはサポートされません
IT8728
環境コントロールイニシアチブ、
もっとも一般に使用されるレガシーSuper I/O機
H/Wモニター
能を採用しています。
ファン速度コントローラ/ モニター
低ピンカウントインターフェイス
ITEの「スマートガーディアン」機能
最高3.0 Gb/秒 / 6.0 Gb/秒のデータ転送速度
SATA 2 & 3 統合シリアルATAコントローラ
SATAバージョン2.0 / 3.0仕様に準拠。
LAN
10 / 100 / 1000 Mb/秒のオートネゴシエーション
Realtek RTL 8111E
半/全二重機能
ALC892
HDオーディ
オのサポート
ハイデフィニションオーディオのサポート
7.1 チャンネルオーディオアウト
USB3.0
NEC uPD720200 / Asmedia ASM1042
データ転送速度最大600 MB /秒の
IEEE 1394
VT6315N
1394a
スロット
58
PCIスロット
x2
PCI Express Gen2 x16スロット
x2
PCI Express Gen2 x 1スロット
x2
TP6 7 X E
仕様
SATA3コネクタ
x2
各コネクタは1つのSATA3デバイスをサポートします
SATA2コネクタ
x3
各コネクタは1つのSATA2デバイスをサポートします
フロントパネルコネクタ
x1
フロントパネル機能をサポートします
フロントオーディオコネクタ
x1
フロントパネルオーディオ機能をサポートします
CPUファンヘッダ
x1
CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ
x2
システムファン電源装置
CMOSクリアヘッダ
x1
USB2.0コネクタ
x3
オンボードコ
ネクタ
各コネクタは2つのフロントパネルUSB2.0ポートをサポ
ートします
消費者IRコネクタ
x1
シリアルポート
x1
IEEE 1394コネクタ
x1
S/PDIFアウトコネクタ
x1
電源コネクタ(24ピン)
x1
電源コネクタ(8ピン)
x2
PS/2キーボード
x1
RCA + S/PDIF アウト
x1
1394ポート
x1
eSATAポート
x1
LANポート
x1
USB2.0ポート
x6
USB3.0ポート
x2
デジタルオーディオアウト機能をサポートします
背面パネル
I/O
USB3.0デバイス (で NEC uPD720200 / Asmedia
ASM1042) USB2.0/USB1.Xデバイス (で P67)
オーディオジャック
ボードサイズ 244 mm (幅) X 305 mm (高さ)
OSサポート Windows XP / Vista / 7
x6
ATX
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。
2011/04/19
59
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement