- No category
advertisement
Fujitsu LifeBook
E Series
BIOS Guide
LifeBook E Series Model
E8210
(Vista OS)
Document Date: 03/29/07
Document Part Number: FPC58-1645-01
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N
1
L i f e B o o k E S e r i e s B I O S
2
E Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook.
The BIOS Setup Utility configures:
■
■
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following (or use the TrustedCore Menu, as detailed in the next section):
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS
Setup Utility with the current settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the following menus and information screens:
■
■
■
■
■
■
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
Clicking on any of the fields will invoke the screen, information, or action described.
The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main,
Advanced, Security, Boot, Info, and Exit. This document explains each menu in turn, including all submenus and setup items.
The following procedures allow you to navigate the setup utility menus:
1. To select a menu, use the cursor keys:
[ ], [ ]
2. To select a field within a menu or a submenu, use the cursor keys:
[ ], [ ].
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next lower selection and [F5] or [-] to go to the next higher selection.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the [Esc] key.
6. To go to the Exit menu from any other menu, press the [Esc] key.
■ Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen.
■ Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed.
Pressing the Enter key again will select the highlighted choice.
7. Pressing the [F9] key resets all items in the BIOS to the default values.
8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too
severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps:
1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen:
Error message - please run SETUP program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
■ If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshooting Section in the system User’s Guide.
The Troubleshooting Section includes a list of error messages and their meanings.
■ If your data security settings require it, you may be asked for a password before the operating system will be opened.
3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values.
M a i n M e n u
3
L i f e B o o k E S e r i e s B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information.)
The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of the field’s function and any special information needed to help understand the field’s use.
System Time and System Date can also be set from your operating system without using the setup utility. Use the Date and
Time icon on your Windows Control panel or type time or date from the MS-DOS prompt.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Info Exit
Item Specific Help
System Time: [ 14 :57:01]
System Date: [03/30/2007]
Drive0 [FUJITSU MHV2060BH]
Drive1 [MATSHITADVD-RAM UJ-841S]
Language: [English (US)]
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
System Time:
Options
–—
Default
–—
System Date: –— –—
Description
Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/2007. You may change each segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
Drive0
Drive1:
Language:
Options
Selects the Drive0
Serial ATA drive submenu
Selects the Drive1
Serial ATA drive submenu
■
■
English (US)
Japanese (JP)
Default Description
The product number of the hard drive.
Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional device configuration options for this interface.
The product number of the CD-
ROM drive.
[English (US)]
Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allowing additional device configuration options for this interface.
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
5
L i f e B o o k E S e r i e s B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
PhoenixBIOS Setup Utility
Main
Drive0 [FUJITSU MHV2060BH]
Item Specific Help
Type:
Total Sectors:
Maximum Capacity:
[Auto] ]
LBA Format
117210240
60012MB SATA1
Select Serial ATA/IDE drive installed here.
[Auto]
The BIOS auto-types the drive on boot time.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 2. Drive0 Master Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Type:
LBA Format
Total Sectors:
Maximum
Capacity:
Options
■
■
Auto
None
---
---
Default
[Auto]
---
---
Description
Selects the hard drive device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Setup items do not appear.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
6
M a i n M e n u
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
PhoenixBIOS Setup Utility
Main
Drive1 [MATSHITADVD-RAM UJ-841S] Item Specific Help
Type: [ Auto ]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode:
Ultra DMA Mode:
[Standard]
[Disabled]
Select Serial ATA/IDE drive installed here.
[Auto]
The BIOS auto-types the drive on boot time.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 3. Drive1 Submenu
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field
Type:
Multi-Sector
Transfers:
LBA Mode
Control:
Options
■
■
Auto
None
■
■
■
■
■
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
■
■
Disabled
Enabled
Default
[Auto]
[Disabled]
[Disabled]
Description
NOTE: The Type field does not appear as a drop-down menu. Tap the spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following setup items do not appear.
This option cannot be changed (automatically identified by the
BIOS). Specifies the number of sectors per block for multiple sector transfer.
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed (automatically identified by the BIOS).
7
L i f e B o o k E S e r i e s B I O S
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field
Transfer Mode:
Ultra DMA
Mode:
Options
■
■
■
■
■
■
■
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
■
■
■
■
■
■
■
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Default
[Standard]
[Disabled]
Description
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed (automatically identified by the BIOS). Multi-word DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed (automatically identified by the BIOS).
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.
8
A d v a n c e d M e n u
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
■
■
■
■
■
Set the I/O addresses for the serial and parallel ports.
Set the keyboard and mouse features.
Select between the display panel and an external
CRT display.
Enable or disable compensation for your display.
Enable or disable the IDE, Mouse, LAN, and Wireless
LAN controllers.
■
Configure CPU and USB features in your system.
(See Navigating through the Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the field’s function and any special information needed to help understand the field’s use.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Info Exit
Serial/Parallel Port Configurations
Keyboard/Mouse Features
Video Features
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
Item Specific Help
Configures serial ports and parallel ports.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 4. Advanced Menu
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Serial/Parallel Port
Configurations
Description
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify settings for serial, infrared and parallel ports.
Keyboard/Mouse Features
Video Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters.
When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays.
Internal Device Configurations When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the ATA, IDE, Bluetooth, Modem, LAN, and WLAN Controllers.
9
L i f e B o o k E S e r i e s B I O S
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
Description
When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery life optimization.
When selected, opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support.
When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button, Wake Up On LAN, and control volume settings.
When selected, opens the event logging submenu.
10
A d v a n c e d M e n u
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu lets you set the I/O addresses and interrupt levels for the serial, infrared and parallel ports of your notebook.
■ To prevent IRQ and address conflicts, avoid changing the default settings. If you must change the settings, you can call 1-800-8Fujitsu for technical assistance.
I/O addresses, DMA channels and
Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same address assigned, your notebook will not function normally. Keep a record of original settings before making any changes if restoration is required. See your hardware and software documentation as well as the setup utility to determine settings and limitations.
■ If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting Section in the system User’s Guide. The
Troubleshooting Section includes a list of error messages and their meanings.
■ All I/O addresses in Table 5 are in hexadecimal.
Advanced
PhoenixBIOS Setup Utility
Serial/Parallel Port Configurations
Serial port: [ Enabled ]
Infrared Port:
Mode:
[Enabled]
[FIR]
Base I/O Address/IRQ: [2E8/IRQ 3]
DMA Channel: [DMA 3]
Parallel Port:
Mode:
Base I/O Address:
Interrupt:
[Enabled]
[Bi-directional]
[378]
[IRQ 7]
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled with user configuration.
[Auto]
Plug & Play OS configures the port.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 5. Serial/Parallel Port Configuration Submenu
11
L i f e B o o k E S e r i e s B I O S
Table 5: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu
Menu Field
Serial Port:
Base I/O Address/IRQ:
Infrared Port:
Mode:
Base I/O Address/IRQ:
DMA Channel:
Parallel Port:
Mode:
Base I/O address:
Interrupt:
Options
■
■
■
Disabled
Enabled
Auto
■
■
■
■
3F8/IRQ 4
2F8/IRQ 3
3E8/IRQ 4
2E8/IRQ 3
■
■
■
Disabled
Enabled
Auto
■
■
IrDA
FIR
■
■
■
■
3F8/IRQ 4
2F8/IRQ 3
3E8/IRQ 4
2E8/IRQ 3
■
■
DMA 1
DMA 3
■
■
■
Disabled
Enabled
Auto
■
■
■
Output Only
Bi-directional
ECP
■
■
■
378
278
3BC
■
■
IRQ 5
IRQ 7
Default
[Enabled]
[3F8/IRQ 4]
[Enabled]
[FIR]
[2E8/IRQ 3]
[DMA 3]
[Enabled]
[Bi-directional]
[378
[IRQ 7]
Description
Configures the serial port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or
OS to choose the configuration (Auto).
Allows user to set the serial port base I/O address and interrupt request when serial port is Enabled.
Configures the infrared port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the
BIOS or OS to choose the configuration (Auto).
When the infrared port is enabled this option is available allowing the user to set the mode for the infrared port.
Allows user to set the infrared port I/O address and interrupt request when the infrared port is Enabled.
Allows user to set the infrared port DMA Channel when the infrared port is Enabled.
Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the
BIOS or OS to choose the configuration (Auto).
When the parallel port is enabled this option is available allowing the user to set the parallel port mode. Bi-directional allows twoway transfer of information between your notebook and a connected parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices.
Allows user to set the parallel port base I/O address when the parallel port is Enabled.
Allows user to set the parallel port interrupt when the parallel port is Enabled.
12
A d v a n c e d M e n u
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Keyboard/Mouse Features Item Specific Help
Numlock:
Hot Plug:
[ Auto ]
[Enabled]
Internal Pointing Device: [Auto Disabled]
Initialization on Resume: [Fast]
[On] or [Off]
Numlock is On or Off.
[On/Padlock Off]
Numlock is On, but use with [Fn] for 10-key input.
[Auto]
Numlock is set to On/
Padlock Off when PS/2 keyboard is connected, otherwise Off.
* Windows XP preserves
Numlock state when the user logs off.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 6. Keyboard/Mouse Features Submenu
F9 Setup Defaults
F10 Save and Exit
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Numlock:
Hot Plug:
Internal Pointing Device:
Initialization on Resume:
Options
■
■
■
■
Auto
On
Off
On/Padlock Off
■
■
Disabled
Enabled
■
■
■
■
Auto Disabled
Manual Setting
Always Enabled
Always Disabled
■
■
Fast
Normal
Default
[Auto]
[Enabled]
[Auto Disabled]
[Fast]
Description
Sets the NumLock function state when the computer completes booting. When [On] or [Off], Numlock is on or off. When [On/Padlock Off] is selected, Numlock is on, but [Fn] key must be pressed used for 10-key input. When [Auto] is selected, Numlock is set to On/Padlock Off when a PS/2 keyboard is connected, otherwise it is off.
Windows XP preserves Numlock state when the user logs off.
Enables and disables the ability to plug a mouse or keyboard into the PS/2 port and have it immediately recognized and activated.
Sets the device controlling the mouse cursor on the screen. Always
Enabled makes the pointing device always enabled whether there is an external mouse or not. Always Disabled makes the pointing device always disabled. Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS/2 port. Manual
Setting allows the device to be enabled or disabled using a HotKey.
When Fast is selected, initialization for the external PS/2 devices is optimized to speed up on Resume. When Normal is selected, initialization is not optimized.
13
L i f e B o o k E S e r i e s B I O S
Video Features Submenu of the Advanced Menu
The Video Features submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Video Features Item Specific Help
Display: [ Auto ]
Compensation: [Enabled]
Select display terminal.
* This setting is not effective after operating system starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 7. Video Features Submenu
F9 Setup Defaults
F10 Save and Exit
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Display:
Compensation:
Options
■
■
■
■
Internal
Flat Panel
External (Analog)
External (Digital)
Autos
■
■
Disabled
Enabled
Default
[Auto]
[Enabled]
Description
Selects where the video signal will be routed. Note that this setting is overridden after Windows starts up.
Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolutions of 1024 x 768 or 800 x 600 will still cover the entire screen. A resolution below 800 x 600 will fill the screen, but due to the low resolution, will appear blocky and may not be acceptable. Note that this setting is overridden after Windows starts up.
14
A d v a n c e d M e n u
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN and Wireless
LAN Controllers.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Internal Device Configurations Item Specific Help
Serial ATA Controller:
AHCI Configuration: [Enabled]
IDE Controller:
Bluetooth(R): [Enabled]
LAN Controller:
Wireless LAN:
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Serial ATA port is disabled.
[Enabled]
Serial ATA port is enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Serial ATA Controller:
AHCI Configuration:
IDE Controller:
Modem Controller:
LAN Controller:
Wireless LAN:
Options
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
Default
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Description
Enables or disables the Serial ATA port.
Enables or disables the selected Advanced Host Controller Interface (AHCI).
Enables or disables selected IDE devices.
Enables or disables Modem controller.
Enables or disables the LAN controller.
Enables or disables the Wireless LAN controller.
15
L i f e B o o k E S e r i e s B I O S
CPU Features Submenu of the Advanced Menu
The CPU Features submenu provides options for configuring the Intel SpeedStep power management features of the
CPU.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
CPU Features Item Specific Help
Core Multi-Processing:
[Enabled]
SpeedStep(R) Technology: [Enabled]
On [Maximum
XD Bit functionality: [Enabled]
Select Core
Multi-Processing enabled or disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 9. CPU Features Submenu
F9 Setup Defaults
F10 Save and Exit
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Core
Multi-Processing:
SpeedStep(R)
Technology:
On Battery:
On AC:
XD Bit functionality:
Options
■
■
Enabled
Disabled
■
■
Disabled
Enabled
■
■
■
Maximum
Performance
Battery Optimized
Automatic
■
■
■
Maximum
Performance
Battery Optimized
Automatic
■
■
Enabled
Disabled
Default
[Enabled]
[Enabled]
[Battery
Optimized]
[Maximum
Performance]
[Enabled]
Description
Enables or disables the Intel Core Multi-Processing features.
Enables or disables the SpeedStep(R) Technology features. When disabled, On Battery and On AC are disabled.
When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power require-
ments
are optimized for battery operation. When Automatic is selected, the CPU speed is determined by the power source used.
When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power require-
ments
are optimized for battery operation. When Automatic is selected, the CPU speed is determined by the power source used.
Enables or disables the Execute Disable Bit feature.
16
A d v a n c e d M e n u
USB Features Submenu of the Advanced Menu
The USB Features submenu provides options for enabling or disabling the USB devices such as mice, keyboard and floppy disk drive.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
USB Features
Item Specific Help
Legacy USB Support
[Enabled]
SCSI SubClass Support: [Enabled]
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation is enabled and USB devices are available without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Legacy USB Support:
SCSI SubClass Support:
Options
■
■
Disabled
Enabled
■
■
Disabled
Enabled
Default
[Enabled]
[Enabled]
Description
When Enabled is selected, Legacy USB Emulation is enabled and the USB devices are available without a USB-aware OS.
When Disabled is selected, Legacy USB support is disabled.
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may cause the system to hang during POST, depending on the device that is connected.
17
L i f e B o o k E S e r i e s B I O S
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Miscellaneous Configurations Item Specific Help
Power Button:
Wake up on LAN:
Force LAN Boot:
Volume Setting:
UMA Video Memory Size:
[Disabled]
[Disabled]
[Disabled]
[Middle]
[128MB]
Configures the power button.
*ACPI OS ignores this setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 11. Miscellaneous Configurations Submenu
F9 Setup Defaults
F10 Save and Exit
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field
Power Button:
Wake up on LAN:
Force LAN Boot:
Volume Setting:
Options
■
■
Disabled
Power Off
■
■
Disabled
Enabled
■
■
Disabled
Enabled
Default
[Disabled]
[Disabled]
[Disabled]
[Middle]
Description
Selecting Disabled disables the power button. Selecting Power Off allows you to turn off system power with the power button.
Selecting Enabled allows the system to wake up when the internal LAN device receives a specific signal while in power-off state. Selecting Disabled disables this feature.
This feature is active only when “Wake up on LAN” is enabled. When enabled, in the event of a system wake-up on LAN, the system will try to first boot from the LAN before attempting to boot from any other device, regardless of the BIOS boot priority settings or disabling of the Preboot
Execution Environment.
Selects the initial volume setting for the system.
UMA Video Memory Size:
■
■
■
■
Off
Minimum
Middle
Maximum
■
■
■
64MB
128MB
224MB
[128MB] Allows you to select the maximum shared video memory size. Video memory is dynamically allocated as needed for running applications by
Dynamic Video Memory Technology (DVMT).
18
A d v a n c e d M e n u
Event Logging Submenu of the Advanced Menu
The Event Logging submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Event Logging Item Specific Help
Event Log Capacity:
Event Log Validity:
View Event Log:
Space Available
Valid
[ Enter ]
Event Logging:
System Boot Event:
[Enabled]
[Disabled]
Clear All Event Logs: [No]
Mark Events as Read: [Enter]
Press <Enter> key to view the contents of the event log.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 12. Event Logging Submenu
F9 Setup Defaults
F10 Save and Exit
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Event Log Capacity:
Options
Event Log Validity:
View Event Log:
Event Logging:
■ Enter
■
■
Disabled
Enabled
System Boot Event:
■
■
Disabled
Enabled
Clear All Event Logs:
Mark Events as Read:
■
■
No
Yes
■
Enter
Default
Space Available
Valid
[Enter]
[Enabled]
[Disabled]
[No]
[Enter]
Description
Display only
Display only
Allows you to view content of event log
Turns event logging on and off for all DMI events.
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Lets you mark all events currently in the event log as having been read.
19
L i f e B o o k E S e r i e s B I O S
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security features of your notebook to fit your operating needs
and to view the current data security configuration. (See
Navigating through the Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields for the Security Menu and its submenus, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.
Remember your passwords! If you set and forget your User and Master hard disk passwords, Fujitsu Computer Systems will not be able to reset it. You may lose data and have to replace your system board or hard disk drive.
■ Entering a password incorrectly 3 times in a row causes the keyboard and mouse to be locked out and the warning [System
Disabled]
to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot.
■ If you make an error when re-entering the password a Warning will display on the screen. To try again press [Enter], then retype the password. Press [Esc] to abort the password setting process.
■
If the Power Management Security is
Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled.
■ Boot sector protection must be set to
[Normal] to install or upgrade an operating system.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Info Exit
Supervisor Password Is:
User Password Is:
Clear
Clear
Set Supervisor Password [ Enter ]
Set User Password [Enter]
Minimum User Password Length: [0]
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
Hard Disk Security
[Disabled]
[Disabled]
[Disabled]
[All]
[Enabled]
Owner Information
Security Chip Setting
Security Panel on Resume: [Enabled]
Item Specific Help
Press <Enter> key to set Supervisor Password to enable any password features.
Then password entry is required to enter BIOS
Setup.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 13. Security Menu
F9 Setup
F10 Save and Exit
20
S e c u r i t y M e n u
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Supervisor
Password is:
User Password is:
Set Supervisor
Password
Set User Password
Minimum User
Password Length:
Password on Boot:
Options
–—
–—
–—
–—
–—
■
■
■
Disabled
First Boot
Every Boot
Default
Clear
Clear
[Enter]
[Enter]
[0]
[Disabled]
Description
A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not.
A display-only field. Set is displayed when the general user password is set, and Clear when it is not.
Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility.
This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. A User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS setup utility.
Supervisor can set password length (0 to 8) for user password. User cannot set a password shorter than the minimum length.
When set to First Boot, a password (User or Supervisor) is required just once after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Every Boot, a password (User or Supervisor) is required every time after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required.
When disabled, password entry is not required when the system wakes up automatically. When enabled, password entry is required upon wake up.
On Automatic
Wake up:
KB Lock on
Resume:
■
■
Disabled
Enabled
■
■
Disabled
Enabled
[Disabled]
[Disabled] When set to Enabled, the PS/2 mouse and keyboard inputs are locked out upon
Resume from Suspend or Save to Disk mode until you enter the password.
When set to Disabled no password is required. If no Supervisor Password is set, this feature is not available and no password is required.
Supervisor only allows access to boot the computer to removable media after the Supervisor Password is entered.
Boot from
Removable Media:
Flash Write:
Hard Disk Security:
Owner
Information:
Security Chip
Setting
Security Panel on
Resume:
■
■
All
Supervisor only
[All]
■
■
Disabled
Enabled
[Enabled]
–—
–—
–—
–—
___ ___
When disabled, the BIOS Flash memory will be write protected.
Configures hard disk security features.
Sets Owner information.
Opens the Security Chip Setting submenu to configure the Security Chip.
■
■
Disabled
Enabled
[Enabled] Enables or disables the Security Panel feature upon Resume from Suspend.
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
21
L i f e B o o k E S e r i e s B I O S
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Hard Disk Security Item Specific Help
Drive0: Clear
Set Master Password [Enter]
Set User Password [Enter]
Drive1: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Press <Enter> key to
Set User Hard Disk
Password. The hard disk is locked with the password. Data in the locked disk cannot be read on other systems.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
Figure 14. Hard Disk Security Submenu
F9 Setup Defaults
F10 Save and Exit
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Drive0:
Set Master
Password
Set User Password
Drive1:
Set Master
Password:
Options
___
___
___
___
___
Default
Clear
[Enter]
[Enter]
Not
Available
[Enter]
Description
Display-only. Default is Clear. When the Drive0 Password has been set, the field changes to Set. When this password is set, the primary hard disk drive cannot be used in another system unless the password is entered.
Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set, it must be used to access the hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted.
Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it must be used to access the modular hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted.
Display-only. Default is Not Available. When Drive1 Password has been set, the field changes to Set. When this password is set, the secondary (modular) hard disk drive cannot be used in another system unless the password is entered.
Sets, changes or cancels the Drive1 Master Password. The Drive1 Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive1Master Password is set, it must be used to access the hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted.
22
S e c u r i t y M e n u
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Set User Password:
Password Entry on
Boot:
Options
___
■
■
Disabled
Enabled
Default
[Enter]
[Enabled]
Description
Sets, changes or cancels the Drive1 USer Password. The Drive1 User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive1 User Password is set, it must be used to access the modular hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted.
When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
23
L i f e B o o k E S e r i e s B I O S
Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information. Note that the owner information cannot be set without having entered a Supervisor Password.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Owner Information Item Specific Help
Owner Information Is: Clear
Set Owner Information [Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Owner Information
Is:
Set Owner Information:
Foreground Color:
Background Color:
Options
–—
–—
■
■
■
■
■
■
Black
Blue
Green
Cyan
Red
Magenta
■
■
■
■
■
■
Black
Blue
Green
Cyan
Red
Magenta
■
■
■
■
■
Brown
White
Gray
Light Blue
Light Green
■
■
■
■
■
Brown
White
Gray
Light Blue
Light Green
■
■
■
■
■
Light Cyan
Light Red
Light Magenta
Yellow
Bright White
■
■
■
■
■
Light Cyan
Light Red
Light Magenta
Yellow
Bright White
Default
Clear
[Enter]
[Gray]
[Black]
Description
Display only.
Field to write owner information, (i.e., name).
Set foreground color.
Set background color.
24
S e c u r i t y M e n u
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting submenu is used to enable or disabled the embedded security chip.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Exit
Security Chip Setting Item Specific Help
Security Chip:
Clear Security Chip
[Enabled]
[Enter]
Security Chip State: Enabled
Activated
Menu Field
Security Chip:
F1 Help
ESC Exit
Options
■
■
Disabled
Enabled
Clear Security Chip –—
Security Chip State: –—
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Security Chip Setting Submenu
Default
[Disabled]
[Enter]
–—
Description
Allows you to enable or disable the security chip. Note that this is only active if a Supervisor Password has been entered. A reboot is required after exit to configure the Security Chip correctly. Clear Security Chip option becomes selectable after reboot.
This field is not selectable until after the security chip is enabled and the system is rebooted.
Display only, to indicate the state of the chip if it has been enabled or disabled.
25
L i f e B o o k E S e r i e s B I O S
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Boot
Quick Boot:
Boot Time Diagnostic Screen:
[Enabled]
[Disabled]
Boot Menu: [Enabled]
Preboot Execution Environment: [Enabled]
Boot Device Priority
Item Specific Help
[Disabled]
All diagnostic tests will be done.
[Enabled]
Some diagnostic tests may be skipped while booting to speed up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 17. Boot Menu
Table 17: Fields, Options and Defaults for the Boot Menu
Menu Field
QuickBoot:
Boot-time
Diagnostic Screen:
Boot Menu:
Preboot Execution
Environment:
Boot Device
Priority
Options
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
■
■
Disabled
Enabled
—
Default
[Enabled]
[Disabled]
[Enabled]
[Enabled]
—
Description
Turns on and off booting with a truncated set of Power On Self Test.
(Fewer tests mean faster startup.)
Turns on and off display of test results instead of Fujitsu logo screen during Power On Self Test.
When Disabled, the Boot Menu is disabled and the [F12] key is ignored. When Enabled, the Boot Menu is enabled.
Turns on and off the preboot execution environment feature.
This menu allows setting up the source for the operating system.
See “The Boot Device Priority Submenu” in the following section.
26
B o o t M e n u
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■ Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Boot
Boot Device Priority Item Specific Help
Boot priority order:
1: Floppy Disk Drive
2: Drive0: FUJITSU MHV2060BH
3: Drive1: None
4: CD/DVD Drive
5: NETWORK: B02 D00 Yukon PXE
6:
7:
8:
Excluded from boot order:
: USB MEMORY: None
: USB HDD: None
Keys used to view or configure devices:
<+>/<Space> or <-> moves the device up or down.
<x> exclude or include the device to boot.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
Change Values
Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 18. Boot Device Priority Submenu
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: Drive1:
4: CD/DVD Drive
5: NETWORK:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
Description
The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten, depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
27
L i f e B o o k E S e r i e s B I O S
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info Menu is a display only screen that provides the configuration information for your notebook.
those fields. These fields are for information purposes only, and cannot be modified by the user.
The following table shows the names of the menu fields for the Info menu and the information displayed in
The information, including CPU type and speed, and total memory, displayed on this screen varies according to the unit you purchased.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Boot Info
BIOS Version: 1.23
BIOS Date: 03/28/2007
BIOS Area: E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Core(TM)2 CPU T7200
2.00 GHz
128 KB
4096 KB
Total Memory: 1024 MB
Memory Slot 1: 512 MB DDR2 SDRAM
Memory Slot 2: 512 MB DDR2 SDRAM
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup
F10 Save and Exit
Figure 19. Info Menu
Table 19: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon the system configuration.
Menu Field
BIOS Version:
BIOS Date:
BIOS Area:
CPU Type:
CPU Speed:
Default
1.XX
XX/XX/XXXX
E000h – FFFFh
Intel(R) Core(TM)2 CPU T7200
2.00 GHz
Menu Field
L1 Cache:
L2 Cache:
Total Memory:
Memory Slot 1:
Memory Slot 2:
Default
128 KB
4096 KB
1024 MB
512 MB DDR2 SDRAM
512 MB DDR2 SDRAM
28
E x i t M e n u
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
The following table shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main Advanced Security Power Savings Boot Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Exit System Setup and save your changes to
CMOS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
Figure 20. Exit Menu
Table 20: Fields, Options and Defaults for the Exit Menu
F9 Setup
F10 Save and Exit
Menu Field
Exit Saving
Changes
Exit Discarding
Changes
Load Setup
Defaults
Discard
Changes
Save Changes
Save Changes and Power Off
Description
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory, then exit the utility. A confirmation message Save Configuration changes and exit now? [Yes][No] is displayed.
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No].
When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory. The message Save configuration changes and power off now? [Yes] [No] will be displayed. When confirmed, the system will shut down. If No is selected, the system will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
29
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 E Series BIOS
- 2 BIOS Setup Utility
- 2 Entering the BIOS Setup Utility
- 2 Using the TrustedCore Menu
- 2 Navigating through the Setup Utility
- 2 Entering the Setup Utility After a Configuration Change or System Failure
- 4 Main Menu - Setting Standard System Parameters
- 6 Drive0 Submenu of the Main Menu
- 7 Drive1 Submenu of the Main Menu
- 9 Advanced Menu - Setting Device Feature ControLS
- 11 Serial/Parallel Port Configuration Submenu of the Advanced Menu
- 13 Keyboard/Mouse Features Submenu of the Advanced Menu
- 14 Video Features Submenu of the Advanced Menu
- 15 Internal Device Configurations Submenu of the Advanced Menu
- 16 CPU Features Submenu of the Advanced Menu
- 17 USB Features Submenu of the Advanced Menu
- 18 Miscellaneous Configurations Submenu of the Advanced Menu
- 19 Event Logging Submenu of the Advanced Menu
- 20 Security Menu - Setting the Security Features
- 21 Exiting from the Security Menu
- 21 When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another me...
- 22 Hard Disk Security Submenu of the Security Menu
- 24 Owner Information Submenu of the Security Menu
- 25 Security Chip Setting Submenu of the Security Menu
- 26 Boot Menu - Selecting the Operating System Source
- 27 Boot Device Priority Submenu of the Boot Menu
- 28 Info Menu - Displays basic system information
- 29 Exit Menu - Leaving the Setup Utility