- Home
- Domestic appliances
- Floor care
- Vacuum cleaners
- BLUEROCK
- 10”Z1 CORE DRILLING MACHINE
- User manual
- 20 Pages
BLUEROCK 10”Z1 CORE DRILLING MACHINE core drill OPERATIONAL MANUAL
Below you will find brief information for core drill 10”Z1 CORE DRILLING MACHINE. This machine is designed to drill through masonry, concrete or other mineral rock types using annular coring bits. It can be used vertically, horizontally or overhead (inverted) provided an acceptable work environment. The machine has a two-speed gearbox, a safety clutch and a water hose and valve. It can drill holes from 1” to 10” in diameter.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Volume
OPERATIONAL MANUAL
MODEL: 10”Z1 CORE DRILLING MACHINE
1.2
by BLUEROCK ® Tools
M W S - 1 0 ” Z 1 C O R E D R I L L
UNPACKING THE ITEM
CAUTION: This machine is packed together with items that may be sharp, oily and overly heavy objects. Remove the machine from the packaging in a safe manner. Check to ensure all accessories are included with the item while unpacking. If any parts are found to be missing, contact the retailer as soon as possible. Do not throw away the packaging until the item is out of the guarantee period. Dispose of the packaging in an environmentally responsible manner. Recycle if possible. Keep all plastic bags away from children due to risk of suffocation.
WEEE - Waste Electrical & Electronic Equipment. Note this machine should be disposed of as electrical & electronic waste.
SLURRY DISPOSAL
NOTE: It is recommended to dispose of the drilling slurry (the muddy/dusty water material) in an environmentally responsible manner. The disposal of slurry directly into sewage systems, sewers, lakes, rivers, or direct earth without treatment can be environmentally harmful and possibly illegal. Ask your local public authorities about current regulations in your area.
© THE NEWMAN TRADING COMPANY LLC DBA BLUEROCK® TOOLS 2016
1100 SW 16
th
St • Suite D
Renton, WA 98057
Phone 206.604.8363 • Fax 425.572.5167 www.bluerocktools.com
1 0 ” Z 1 C O R E D R I L L
Table of Contents
SAFETY
PRE-OPERATIONAL SAFETY CHECKS
OPERATIONAL SAFETY CHECKS
HEALTH WARNINGS
SPECIFICATIONS
INCLUDED ACCESSORIES
ADDITIONAL AVAILABLE ACCESSORIES 5
A
DDITIONAL ACCESSORIES FOR THIS MACHINE CAN BE FOUND IN
BLUEROCK ® T
OOLS ONLINE SHOP AT
WWW
.
BLUEROCKTOOLS
.
COM OR FROM YOUR LOCAL RETAILER
.
5
4
4
OPERATIONS
PURPOSE
OPERATIONAL PRINCIPLES
MACHINE COMPONENTS
TRANSPORTING THE MACHINE
RUNNING THE MACHINE
INSTALLING CORING BITS
TROUBLESHOOTING
1
1
1
2
6
6
6
6
7
7
9
10
GENERAL MAINTENANCE
OCCASIONAL MAINTENANCE
PARTS LIST
BREAKDOWN VIEW – OVERVIEW 10”Z1/10”Z1RB
BREAKDOWN VIEW – MOTOR
BREAKDOWN VIEW – GEARBOX
BREAKDOWN VIEW – DRILLING STAND
14
15
16
11
11
13
17
1 0 ” Z 1 C O R E D R I L L Chapter
1
Safety
DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE
OPERATING INSTRUCTIONS!
Safety glasses must be worn at all times in work areas.
Appropriate footwear must be worn.
Long and loose hair must be contained.
Close fitting/protective clothing must be worn.
Safety gloves should be worn at all times and jewelry must not be worn.
Hard-hat must be worn while using machine.
Hearing protection should be worn when using this machine.
Dust mask must be worn while using this machine.
Read operational manual prior to use.
PRE-OPERATIONAL SAFETY CHECKS
Ø
Examine the power cord and plug for damage. This tool is supplied with a ground plug and must always be used with a properly grounded circuit.
Ø
Examine the body of the machine and inspect for damage or defects.
OPERATIONAL SAFETY CHECKS
Ø
ONLY to be operated by qualified personal who have read instructions.
o NOTE: Failure to read and follow instructions could result in electrical shock, fire, property damage and/or
serious injury!
Ø
DO ensure all non-essential people are clear of the immediate work area.
Ø
DO be attentive at all times. Keep your eye on the work piece. Always be in a sensible state of mind and do not use the machine if you cannot fully concentrate.
Ø
DO keep body parts, clothing & power cords clear of turning/cutting pieces. Stay alert and use common since when using this tool.
Ø
DO allow machine to reach operating speed before starting a hole.
1
1 0 ” Z 1 C O R E D R I L L
Ø
DO unplug machine while changing or adjusting cutting bits so as not to accidentally turn machine on.
Ø
DO remove adjusting wrenches prior to turning the machine on.
Ø
DO guard against electric shock by only operating this tool on a properly functioning GFCI (Ground Fault Circuit
Interrupt) circuit.
Ø
DO be mindful that power tools can expose an operator to vibrations transmitted trough contact with the machine.
Prolonged exposure can lead to medical issues which should be discussed with a medical professional.
Ø
DO tie in a drip loop in the power cord to prevent water from running into the power receptacle.
Ø
DO use a dust extraction system for cutting materials that create dust. The operator should also wear a protective respiratory device.
Ø
DO NOT make adjustments to machine while the machine is running.
Ø
DO NOT switch off the machine when it is under load, except in an emergency.
Ø
DO NOT remove or modify grounding plug. Only to be used on a properly grounded GFCI circuit.
Ø
DO NOT leave the machine running when not in use.
Ø
DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure work piece.
Ø
DO NOT allow operator to make contact with grounded surfaces such as metal objects.
Ø
DO NOT allow liquids to enter the machine’s ventilation system.
Ø
DO NOT operate machine outside of machine specifications.
Ø
DO NOT touch moving parts while the machine is running as death or dismemberment could occur.
Ø
DO NOT operate machine overhead (Inverted) when drilling “wet” type cores.
Ø
DO NOT remove machines electrical components while connected to a power source. Only to be removed for service by qualified personal and put back on the machine after service is complete.
Ø
DO NOT allow children or untrained personal to operate machine.
Ø
DO NOT use this machine in the rain or a wet environment.
Ø
DO NOT operate in the presence of explosive materials as power tools create sparks which may ignite dust or fumes.
Ø
DO NOT drill into an area that may contain a live electrical wire/circuit.
Ø
DO NOT use this machine without safely securing to the work piece being drilled.
Ø
DO NOT use full water pressure when drilling with “wet” type bits! You only need minimal water to drill with these machines. Extreme water pressure can cause water to enter the gearbox!
Ø
DO NOT operate this machine on a lower voltage as it may result in reduced power level and the machine could become unstable while cutting. This could also limit the motor life.
o
NOTE: Use of long small gauge power extension cords can result in decreased voltage. As local voltages can vary, it may be a good idea to test the voltage at the end of the extension cord to ensure proper voltage requirements are met. You might also consult an electrician to make sure the length of cord matches up with the proper wire gauge for this size motor. Make sure to use outdoor cords when operating outdoors.
HEALTH WARNINGS
Ø
Certain dust created by drilling contains chemicals known to cause cancer, birth defects or other reproductive harm.
The examples of these chemicals are below:
o
Lead from lead based paint.
2
1 0 ” Z 1 C O R E D R I L L o
Crystalline silica from bricks, cement and assorted masonry products.
§
TO REDUCE RISK OF EXPOSURE TO THESE CHEMICALS, WORK IN A WELL VENTILATED
AREA WITH VACUUM SYSTEMS, RESPIRATORS AND WITH ALL SUITABLE SAFETY
EQUIPMENT.
3
1 0 ” Z 1 C O R E D R I L L
Specifications
ELECTRICAL DATA
Voltage
Current
Motor Size
Power Connection
110V, 50-60Hz, Single Phase
21.6 Amps (30A Circuit Use Recommended)
2600W
US Standard 3 Prong Type B Plug
Chapter
2
MECHANICAL DATA
Cutter Range
Cutting Speed
Tool Holder
Safety Clutch
Water hose and Valve
Travel
Stand Height
SHIPPING DATA
Shipping Weight
Shipping Carton
1” to 10” Max Diameter (255mm)
460/900 RPM Two Speed Gearbox
1) Gear 2 (900 rpm) for 1”-4” Holes
2) Gear 1 (460 rpm) for 4”-10” Holes
Direct Arbor 1-1/4” 7 UNC Spindle
Yes
Yes
21”
31.5”
76 Lbs
40” x 10” x 17”
Included Accessories
DESCRIPTION
Instruction Manual
Wrenches
Feed Handle
Water Hose and Valve
Alternate Hose
Top Bolt for Binding in Ceilings
Hex Wrench
Spare Brushes (set)
Black Frame Handle
QTY
1
2
1
1
1
1
3
1
1
4
1 0 ” Z 1 C O R E D R I L L
Note
UPON RECEIPT, CHECK CAREFULLY TO ENSURE THAT THE
MACHINE IS IN GOOD CONDITION AND HAS ALL
ACCESSORIES LISTED ABOVE.
Additional Available Accessories
Additional accessories for this machine can be found in BLUEROCK ® Tools online shop at www.bluerocktools.com or from your local retailer.
DESCRIPTION
1” Wet Coring Bit
1.25” Wet Coring Bit
1.5” Wet Coring Bit
1.75” Wet Coring Bit
2” Wet Coring Bit
2.5” Wet Coring Bit
3” Wet Coring Bit
3.5” Wet Coring Bit
4” Wet Coring Bit
4.5” Wet Coring Bit
5” Wet Coring Bit
6” Wet Coring Bit
7” Wet Coring Bit
8” Wet Coring Bit
9” Wet Coring Bit
10” Wet Coring Bit
1” Dry Coring Bit
1.25” Dry Coring Bit
1.5” Dry Coring Bit
1.75” Dry Coring Bit
2” Dry Coring Bit
2.5” Dry Coring Bit
2.75” Dry Coring Bit
3” Dry Coring Bit
3.5” Dry Coring Bit
4” Dry Coring Bit
5” Dry Coring Bit
1-1/4” 7 UNC to 5/8” 11 UNC Core Bit Adapter
10” Extension Rod
12” Extension Rod
18” Extension Rod
5
1 0 ” Z 1 C O R E D R I L L
Chapter
3
Operations
Note
THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE OPERATING
THIS MACHINE!
PURPOSE
Ø
The purpose of the 10”Z1 Core Drill is to drill through masonry, concrete or other mineral rock types using annular coring bits.
Ø
These drills are designed to be bolted to the drilling surface through their base.
o
NOTE: Make sure the base fits completely on the surface and the base is securely fastened using wedge anchors to bolt to the surface.
Ø
These machines can be used vertically, horizontally or overhead (inverted) provided an acceptable work environment. NOTE: For safety, when drilling horizontally or overhead a safety chain/strap should always be used.
o
CAUTION: If drilling overhead you are only permitted to use dry type core bits with a vacuum system. “Wet” type holes overhead would allow water into the motor and create an extremely dangerous situation.
OPERATIONAL PRINCIPLES
Ø
The main drilling shaft rotates in a forward clockwise direction. The main drilling motor connects to the tool spindle to make contact with a surface and slowly bore a hole. Using the feed handles on the side of the drill, the user can raise or lower the drilling motor.
Ø
These drills are ONLY to be used with diamond impregnated coring bits.
o
When drilling with “wet” type bits, the bit ends pulverizes the material and the water brings the material out of the cut.
o
When drilling with “dry” type bits, the bit end pulverizes the material and dust brings the material out of the cut.
MACHINE COMPONENTS
Ø
The main components of the 10”Z1 are the spindle, gearbox, motor, carriage, drill stand and base. The spindle is driven by the transfer case and the motor.
o
These components must be not be removed except by a qualified technician. Power must be disconnected prior to any service.
Ø
This machine has one primary adjusting point for the travel between the drill carriage and the drill stand.
The main way to increase or decrease the users ability to move the drill by hand is with this system. These
6
1 0 ” Z 1 C O R E D R I L L
are the black hex bolts on the side and back of the machine that have a locking nut around them. These are generally used to tighten up the travel as the slides wear over time. Be mindful to evenly adjust these so that the travel is even and smooth. The ideal travel generally keeps the drill in place when the user is not using the drill (this is usually on the tighter side) although individual users needs may vary. The side black carriage bolt can also be used for temporarily locking the carriage in place.
1) Motor Brush Holder
2) Motor On/Off Switch
3) Top Bolt for Binding in Ceilings
4) Drill Motor
5) Carriage Adjusting Bolts
6) Black Frame Handle
7) Drill Carriage
8) Feed Handle
9) Gearbox
10) Spindle
11) Drill Stand
12) Coring Bit (not included)
13) Stand Base
TRANSPORTING THE MACHINE
Ø
When transporting the machine, always use two hands.
Ø
DO NOT transport the machine with bits in the spindle.
Ø
If transporting inside a vehicle, it is recommended to transport it on its side so as to avoid the item falling over.
Ø
DO NOT carry the machine by the cord.
Ø
DO NOT allow the cord or plug to drag along the floor when transporting.
RUNNING THE MACHINE
Ø
Do all pre-operational and operational safety checks from Chapter 1.
Ø
Consider your security and stability as well as the orientation of the machine in the work area.
7
1 0 ” Z 1 C O R E D R I L L o
Consider the work surface material, condition, strength, density and rigidity. These factors directly affect the tools efficiency.
Ø
Secure the machine base to the work surface by using a wedge anchor or other method to ensure the base does not move.
Ø
Use the four leveling bolts on the corners of the base to level the machine.
Ø
After placing the machine in work area, connect a safety chain or strap if necessary.
o
The safety chain should attach to the machine (preferably through the carrying handle or O bolt) as well as attached to the work area in such a manner that prevents the machine from detaching or falling from the work area.
Ø
Ensure the feed handles are securely attached to the feed spindle.
Ø
Ensure the work surface is free of debris, oil, etc.
Ø
Select and set up fluid delivery method or dust system.
Ø
Select the gear you will be using.
o
Do not force the gear shifter when changing between gears. There is a neutral position between gear 1 and gear 2.
o
Change gears when the machine is stopped or almost stopped.
Ø
If using the machine horizontally with the water system, connect hose to the side of the machine using the connector.
o
This connector takes standard ¾” US garden hose hookup.
o
Make sure the water valve is in the off position.
§
This is generally at a 90 degree angle from the valve hose.
o
Partially turn the water spigot on (usually half a turn).
§
CAUTION: DO NOT turn the hose on fully! You need sufficient water when using wet type bits. Using too much water pressure can cause the bits to not cut properly as well as water entering the gearbox.
Ø
Select appropriate size cutting bit. See section below for details on securing bit.
Ø
Check that the machine is firmly attached to the work area.
Ø
Plug the machine into power source.
o
Form a loose knot in the power cord close to the plug connection to prevent fluid from running down the cord and into the power receptacle.
Ø
Turn feed handle raising the cutter until the bit is above the work surface.
Ø
Open the water valve to allow water to come out to the work surface.
Ø
ATTENTION: BE AWARE THESE MACHINES ARE EXTREMELY POWERFUL. THEY HAVE A TREMENDOUS
AMOUNT OF TORQUE WHICH MIGHT NOT BE SUITABLE FOR ALL POTENTIAL USERS. ESPECIALLY IN
LOW GEAR AND WITH LARGER BITS. DESPITE THE SAFETY CLUTCH, THESE DRILLS CAN STILL
INJURE THE USER. IF IN DOUBT, CONTACT A PROFESSIONAL FOR ADVICE.
Ø
Turn the machine on by flipping the breaker switch to the “on” position.
Ø
Very slowly engage the cutting bit with the material surface by lightly engaging the hand crank down towards the material.
o
NOTE: During the initial stages of contact the bit may wander.
Ø
After about 1/8” of cutting has been achieved in the work surface, slightly more force can be applied. This will be the normal amount of force the rest of the hole.
8
1 0 ” Z 1 C O R E D R I L L o
NOTE: Do not force the hole. Let the machine do most of the work. Excessive physical effort should be avoided as it can cause damage to the machine or the user.
o
If the unit jams in a hole, stop the drill immediately to prevent injury. Disconnect the drill from the power supply and loosen the cutter by turning drill spindle counterclockwise. Never attempt to free bit by starting motor!
§
After an interruption in drilling, make sure the drill bit is free and turns before restarting the hole. Be very careful at this point to make certain the drill does not bind when restarting.
Ø
Make sure to keep the cutting material lubricated.
Ø
Ease up on feed pressure as the cutter starts breaking through the backside of the material.
o
Be certain all is clear on the output side of this core to prevent injury to persons or property.
Ø
Finish drilling the hole.
Ø
Turn the motor off and disconnect power once the drill is safely back up in the non-drilling position.
Ø
Turn water valve off.
Ø
Unbolt the wedge anchor.
Ø
Disconnect safety chain/strap and move the drill to a new drilling location.
INSTALLING CORING BITS
Ø
WARNING: Core bits can be sharp and should only be handled with gloves so as not to cut the user during installation or removal.
Ø
Check that the bits are not damaged.
o
Coring bits that are damaged should not be used.
Ø
Make certain the machine is unplugged from power.
Ø
Raise the drill motor to ensure ample room to install the bit.
o
Apply grease to the spindle thread to prevent corrosion and allow easier core bit removal.
Ø
Insert the coring bit and screw it onto the drill spindle.
Ø
Tighten the bit until fully tightened.
o
Use wrenches that fit the spindle and coring bit to fully tighten.
9
1 0 ” Z 1 C O R E D R I L L
Troubleshooting
Note
SERVICING SHOULD ONLY BE DONE BY A QUALIFIED TECHNICIAN.
DON’T FORGET TO UNPLUG POWER TO UNIT PRIOR TO SERVICE!
Chapter
4
PROBLEM SOLUTION
Motor does not turn on. 1) Check external power source (extension cord, breaker, etc).
2) Loose internal wire. Check and secure if necessary.
3) Motor brushes defective. Replace if necessary.
4) Check to ensure the motor on/off switch is operable. Replace if necessary.
Excessive sparking when motor is running.
1) This may indicate the presence of debris in the motor or worn out carbon brushes. Check the brushes for unusual wear and replace if necessary. Clean out the internal motor armature if necessary.
2) Armature has a rough edge. Inspect and replace if necessary.
Hole is not cutting.
Bit is jammed while coring.
Coring speed has reduced.
Core bit appears to wobble.
Water escapes at the water swivel or gear housing.
1) Cutting bit is dull. Replace bit.
2) Work area material is not appropriate for bit type.
1) Debris is lodged between core hole and bit. Rotate bit in both directions to and inspect bit for debris.
2) Make sure stand is secured to work surface.
1) Bit has hit rebar. Adjust feed control to prevent motor overload while cutting through rebar.
2) Diamonds on bit have glazed over. Deglaze bit or dress diamond rim on bit and check water flow rate.
3) Diamonds on bit have worn away. Replace core bit.
4) New core bit. Core at slow rate with new bits for 2-3 coring cycles.
5) The safety clutch is slipping. Tighten clutch.
6) Drilling progress is prevented by an accumulation of dust. Use suitable vacuum cleaner.
7) Water flow rate is too low. Increase water flow.
8) Core is stuck in the core bit. Remove core.
1) Spindle is damaged. Replace spindle and check bearings.
2) Bit is bent or damaged. Replace bit.
3) The core bit is not screwed securely onto the spindle.
4) Coring material is attaching to the bit. Inspect bit and increase water flow rate.
1) The water pressure is too high. Turn down water flow.
2) The shaft seal is defective. Replace seal
3) The water hose is damaged. Replace hose.
10
1 0 ” Z 1 C O R E D R I L L
General Maintenance
Ø
Inspect electrical cords and electrical connections.
Ø
Keep machine clean and free of debris.
Ø
Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø
Keep cutting tools sharp and clean. Sharp bits are less likely to bind and are easier to control.
Chapter
5
Occasional Maintenance
Ø
Have the power tool serviced by a qualified service technician using identical replacement parts.
o
Change motor brushes:
1) Disconnect drill from power.
2) Unscrew left and right side brush holder caps using a flathead screw driver.
3) Take out old brushes.
o
If you need to, use the screw driver to nudge them out.
4) Replace with exact same size new brushes.
5) Screw in brush holder caps tightly.
o
Adjusting Carriage:
1) Periodically check and adjust slides as necessary.
2) Use hex wrench to loosen the hex bolts on the carriage. There are four hex bolts on each adjusting slide. Backing out the bolts will loosen feed tension, while tightening the bolts will increase feed tension.
3) Adjust the bolts evenly while moving the handle up and down so that there’s no free play yet not binding anywhere through its range of travel.
o
Change Gear Oil:
1) Change if necessary using NLGL-2 grade grease. This service is generally done around the 50 hour service mark.
o
Adjust Safety Clutch:
1) Adjust clutch as necessary.
o
NOTE: A torque wrench is necessary for this service.
11
1 0 ” Z 1 C O R E D R I L L o
Make certain the spindle is facing the ground so as not to get oil/grease everywhere. Locate the hex screws holding the gear housing together and remove them.
o
Gently pull the gear housing apart. You may use a couple flat screwdrivers to gently apply pressure to separate the housings.
o
Take the main clutch nut off of the clutch. Apply some Loctite type of thread glue on the clutch threads.
o
Reapply the nut to the thread.
o
Hold the spindle in place using the box wrench. See diagram below.
o
Use the torque wrench to tighten the clutch nut.
o
Torque the tensioning nut to 40 NM (354 inch/lbs, 29.5 ft/lbs).
o
With the clutch nut tightened, reassemble the housings. Make sure the orientation of the internal gears is correct and the housings mate correctly.
o
Reattach the bolts that hold the housing together.
12
1 0 ” Z 1 C O R E D R I L L
Chapter
6
Parts List
No Name
1 Spring ring for holes
No Name
36 Shaft sleeve
2 Washer 37 Hex nut
3 Rubber sealing 42x55x8 38 Needle bearing BK1816
No Name
71 Brush assembly
72 Brush holder
73 Rivet of label
4 Label
5 Water sealer
6 Adjust shim
7 Main spindle
9 6205 bearing
10 Label
11 Seal gland
12 Small cover plate
13 M4x6 nut bolt
14 Spring plate
15 Pin 10x30
16 Spring column pin
17 Spring
18 Spring plate
19 Column pin A3x25
20 Button
21 Spring for shaft
22 Middle cover
23 Mechanic stick
24 Inner hexagonal screwM6x105
25 Spring washer
26 Plain washer
27 Gear box
28 Pressing ring
39 Seal ring
40 Adapter of water switch
41 Water switch
42 Ball valve
8 Spring ring for holes 52 43 Binding ring
44 Shim
45 Binding bolt
46 Water adapter with machine
47 6201 bearing
74 Label
75 M5x10 socket head cap screw
76 Rear cover of shell
77 M4x14 nut bolt
78 Socket head cap screw
M4x90
79 Spring washer
80 Plain washer
81 Nut
60 Flat key C4x16
61 No2 gear
62 6201 bearing
63 Armature
82 Washer
48 No7 gear spindle 83 Spring washer
49 Ball thrust bearingAXK3047 84 M5x6 nut bolt
50 No6 gear
51 Copper tube
85
86
Cover of switch box
M4x10 nut bolt
52 Flat key C4x12
53 Change speed spindle
87 Seal of switch box
88 Electric capacity
54 Ball thrust bearingAXK4060 89 Switch
55 Copper tube 90 Switch box
56 No4 gear 91 ST4.2x13 nut bolt
57 Ball thrust bearingAXK1730 92 Wire with plug
58 6200 bearing 93 PRCD switch (Optional)
59 Gear spindle 94 Protecting jacket
95
96
97
98
13
Ring of wire
M4x16 nut bolt
Handle ball
Operating arm
No Name
106 Spring washer
107 M8x55 nut bolt
108 Square pipe assembly
109 M5x8 nut bolt
110 M12x65 nut bolt
111 M16x75 nut bolt
112 NutM16
113 Clamp assembly
114 Base (RB Optional)
115 M6x50 screw bolt
(RB Optional)
116 2" wheel (RB
Optional)
117 Plain washer (RB
Optional)
118 Nut M6 (RB Optional)
119 M8x20 nut bolt
120 Elevating body cover
121 M8x35 nut bolt
122 Handle
123 M5x16 nut bolt
124 Bushing
125 Peg
126 Movable pulley
127 Pulley yoke
128 Adjustment sheet
129 M8x10 nut bolt
130 Top nut bolt of stand
131 M4x6 nut bolt
132 Track
133 Plain washer
1 0 ” Z 1 C O R E D R I L L
29 Small friction disk
30 No8 gear
31 Spline tube
32 Outer friction disk
33 Friction disk
64 Draught ring
65 Bead flange
66 Stator
67 Cover of stator
68 6202 bearing
34 Inner spline friction disk 69 Shell
35 Disk spring 70 Brush cap cover
99 Sleeve of operating arm
100 Fastener
101 Bead flange
102 6003 bearing
103 Operating gear spindle
104 Stop pin
105 Elevating body
Breakdown View – Overview 10”Z1/10”Z1RB
8x12x110
134 Lengthen board
14
1 0 ” Z 1 C O R E D R I L L
Breakdown View – Motor
15
1 0 ” Z 1 C O R E D R I L L
Breakdown View – Gearbox
16
1 0 ” Z 1 C O R E D R I L L
Breakdown View – Drilling Stand
17
advertisement
Key Features
- two-speed gearbox
- safety clutch
- water hose and valve
- 1” to 10” diameter holes
- vertical, horizontal or overhead use
- wedge anchor mounting
- diamond impregnated coring bits