Wireless Body Analysis Scale (HS5)

Balance d'analyse corporelle sans fil (HS5)

Bilancia pesapersone wireless iHealth (HS5)

Báscula inalámbrica de análisis corporal (HS5)

Drahtlos-Körperanalysewaage (HS5)

OWNER’S MANUAL

MODE D'EMPLOI

MANUALE D’ISTRUZIONI

MANUAL DEL PROPIETARIO

BEDIENUNGSANLEITUNG

EN

iHealth

TM

INTRODUCTION

PACKAGE CONTENTS

INTENDED USE

IMPORTANT NOTE FOR USERS

CONTRAINDICATION

PARTS AND DISPLAY INDICATORS

SET UP REQUIREMENTS

SET UP PROCEDURES

SET UP THE SCALE’S WI-FI CONNECTION

MEASUREMENT INSTRUCTIONS

SPECIFICATIONS

GENERAL SAFETY AND PRECAUTIONS

TROUBLESHOOTING

CARE AND MAINTENANCE

WARRANTY INFORMATION

EXPLANATION OF SYMBOLS

10

12

12

12

8

9

4

5

3

3

2

2

1

2

1

1

INTRODUCTION

Thank you for purchasing the iHealth Wireless Body Analysis

Scale. You will now be able to measure, track, and share vital body composition parameters from the comfort of your home.

In addition to body weight, the iHealth Wireless Body Analysis

Scale measures:

This manual will guide you through the set up procedures and highlight the Scale’s key features. Please keep it handy for future reference.

To learn more about these body composition parameters, refer to the FAQ section of the iHealth App or visit www.ihealthlabs.com.

PACKAGE CONTENTS

INTENDED USE

The iHealth Wireless Body Analysis Scale is a precision electronic instrument intended for adult use. The Scale utilizes full electronic methodology and pressure sensors to non-invasively measure body composition components automatically. The measurements are displayed and stored on an iPod touch, iPhone, or iPad with a date and time stamp.

1

IMPORTANT NOTE FOR USERS

Pregnant women need to consult their healthcare provider before use. Some physical conditions could affect hydration levels that may lead to inaccurate results. Please consult your healthcare provider for more information.

Always store the iHealth Wireless Body Analysis Scale in a dry place. To ensure accurate results, keep the Scale away from magnetic fields as these may adversely affect results or possibly damage the Scale.

CONTRAINDICATION

Never use this product in combination with medical electronic devices such as:

!

!

!

(1) Medical electronic implants such as pacemakers.

(2) Electronic life support systems such as artificial heart/lungs.

(3) Portable electronic medical devices such as electrocardiographs.

This product could cause these devices to malfunction posing a considerable health risk to users of these devices.

PARTS AND DISPLAY INDICATORS

2

User

Wirless Signal

Body Fat

Settings

SET UP REQUIREMENTS

The iHealth Wireless Body Analysis Scale is designed to be used with the following iPod touch, iPhone and iPad models: iPhone 3GS iPad (3rd generation) iPad2 iPad

SET UP PROCEDURES

from the App Store.

It is very important that every Scale user follows the on-screen instructions to register and complete a personal profile because data points such as height and age are necessary to measure body composition.

3

and WPA2 personal security modes.

Open the battery cover on the back of the Scale and

!

!

!

!

batteries.

Rechargeable batteries are not suitable for this

Scale.

To avoid damage as a result of battery leakage, remove the batteries if the Scale is not going to be used for 3 months or more.

Avoid getting battery fluid in your eyes. If it gets in your eyes, immediately rinse with clean water and contact a physician.

PUSH

The Scale and the batteries must be disposed of according to local regulations at the end of their service life.

Select a weight unit by adjusting the switch under the battery cover.

SET UP THE SCALE’S WI-FI CONNECTION

(Prior to first use, or when changing routers.)

PUSH

STEP 1: Connect iOS device to your home Wi-Fi.

(Settings->Wi-Fi->On)

STEP 2: Turn Bluetooth searching for the Scale.

STEP 3:

will start

Bluetooth screen. Select device to detect the Bluetooth

4

STEP 5: The wireless signal icon on the Scale’s display will flash for a few seconds and then stabilize when Wi-Fi connection is successful. The Scale should display as shown below.

The Bluetooth connection will then automatically disconnect from the Scale. Your scale is now connected to your home Wi-Fi and ready to use.

MEASUREMENT INSTRUCTIONS

a. Launch the iHealth App. Step on the Scale to turn it on and wait

5

b. Stand on all four electrodes with bare feet. Your weight data will appear on the Scale display first, followed by Body Fat %.

Remain on the scale for a few seconds to allow the scale to continue the measurement. If you have socks on, the Scale will only display your weight.

The iHealth App will show detailed body composition data including Weight, BMI, Body Fat, Lean Mass, Body Water

Daily Calorie Intake (DCI).

Note: If the Body Fat measurement fails, only your weight will be displayed.

6

user is by matching the new weight with weight previously recorded. If the weight of two or more users is similar, the Scale lower left corner to select the appropriate user, and then step lightly on the lower right corner to confirm. When taking measurements without an iOS device, your current measurement data will be uploaded to the Cloud automatically.

button under the battery cover on the back of the Scale to reset the Wi-Fi connection, then proceed to the “SET UP THE SCALE’S

each user’s memory is full, any new measurements will overwrite the oldest ones.

The Scale shuts down automatically after 2 minutes following completion of the measurement. If a new measurement is started or any App operation is performed during this time, such as uploading the memory contents of the Scale to an iOS device, the shutdown timer will be reset to 2 minutes.

7

GENERAL SAFETY AND PRECAUTIONS

1. Read all of the information in the Owner’s Manual and other included product information in the packaging before operating this product.

2. Please stand on the Scale with bare feet, keeping as still as

possible until the results appear on the display.

3. Do not stand on the edge of the Scale as you may fall or receive inaccurate measurements.

!

in a fall.

5. Ensure that the surface of the Scale is clean and dry before you step onto it as it may become slippery when wet.

6. Treat your Scale with care. Do not drop it or jump on it. The the electronic sensors inoperative, cause you to fall, or adversely affect the accuracy of measurements.

7. Never immerse the Scale in water. Clean the surface with a damp cloth.

8. Do not use the Scale on an uneven floor, a soft surface or a carpet as doing so may result in unreliable data.

batteries if the Scale is not going to be used for more than 3 months.

Infants or young children or any person who cannot stand still without assistance, should not use it.

11. It may not be safe for people with pacemakers to use this

Scale.

12. Avoid using this Scale near strong magnetic fields, such as microwave ovens, etc.

13. The Scale may not perform accurately if it is stored or used outside the specified temperature and humidity ranges cited under Specifications.

operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

9

interference that may cause undesired operation.

15. Changes or modifications not expressly approved by iHealth

Lab Inc. invalidate the user’s warranty for this equipment.

16. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

help.

17. This device complies with Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of the

device.

TROUBLESHOOTING

Scale model name is not listed on the Bluetooth Menu of the iOS device on the back of the Scale.

10

Bluetooth connection failed

Wi-Fi sharing pop-up window doesn’t show on the iOS device

1.Turn off and turn on the

Bluetooth, and re-establish the

Bluetooth connection.

2.If the problem persists, restart your iOS device.

Re-establish the Bluetooth connection appear on the Scale display

App and Scale connection failed

1. Make sure iOS device is connected to a router.

2. Make sure MAC address is not filtered by router.

3. Repeat from Step 3 of “CONNECT the Quick Start Guide

Make sure Scale is powered on, and

Wi-Fi signal is stable, not flashing.

Make sure your iOS device and Scale is connected to the same router.

Wi-Fi symbol doesn’t appear on the Scale display

Wi-Fi symbol turns off after back of the Scale.

Make sure your router is powered on

The Scale does not respond Remove the batteries from the Scale.

Wait 1 minute and re-install the batteries.

If problem persists, replace with a new set of batteries.

Make sure batteries are installed correctly, if the problem persists, replace with a new set of batteries.

Remove the batteries, wait 1 minute and then replace with a new set of batteries. If problem persists, please contact iHealth Customer Service.

The current weight may be beyond the

Place feet in the center of the Scale, stand still, and allow the Scale to shut off completely after weighing. Do not move the Scale unnecessarily.

11

Make sure Scale is connected to a router.

Make sure router is connected to internet.

The Scale failed to detect body impedance. Make sure you step on all four electrodes with bare feet, and try again.

CARE AND MAINTENANCE

1. Avoid high temperatures and directly sunlight. Do not immerse the Scale in water, as this will damage the Scale.

2. If the Scale is stored in near freezing or freezing temperatures, allow it to acclimatize to room temperature before use.

3. Do not attempt to disassemble the Scale.

more than 3 months.

5. Clean the Scale with a soft damp cloth if dirty. Do not use abrasive or solvent-based cleaners.

6. The Scale is essentially maintenance-free and requires no user intervention.

7. The Scale will maintain its safety and performance features for

WARRANTY INFORMATION

The iHealth Wireless Body Analysis Scale is warranted to be free from defects in materials and workmanship appearing within 1 year from the date of purchase, when used in accordance with the instructions provided. The above warranties extend only to the original retail purchaser. We will, at our option, repair or replace without charge any product covered by the above warranties.

Repair or replacement is our only responsibility and your only remedy under the above warranties.

EXPLANATION OF SYMBOLS

!

12