Global Graphics Epson Stylus Pro 4800 Printer plugin User Guide

PDF

Документ

ProofMate (ProofReady) Plugin for Epson Stylus Pro 4800 Printers

Version 1.2r1

August 2010

AG50566 Rev. 5

Copyright and Trademarks

Epson4800 ProofReady Plugin for Epson StylusPro 4800 printers

Version 1.2r1

Part number: HQN-EPSON4800-1.2r1

Document issue: 125

August 2010

Certificate of Computer Registration of Computer Software. Registration No. 2006SR05517

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Global Graphics Software

Ltd.

The information in this publication is provided for information only and is subject to change without notice. Global Graphics

Software Ltd and its affiliates assume no responsibility or liability for any loss or damage that may arise from the use of any information in this publication. The software described in this book is furnished under license and may only be used or copied in accordance with the terms of that license.

Harlequin is a registered trademark of Global Graphics Software Ltd.

The Global Graphics Software logo, the Harlequin at Heart Logo, Cortex, Harlequin RIP, Harlequin ColorPro, EasyTrap,

FireWorks, FlatOut, Harlequin Color Management System (HCMS), Harlequin Color Production Solutions (HCPS),

Harlequin Color Proofing (HCP), Harlequin Error Diffusion Screening Plugin 1-bit (HEDS1), Harlequin Error Diffusion

Screening Plugin 2-bit (HEDS2), Harlequin Full Color System (HFCS), Harlequin ICC Profile Processor (HIPP), Harlequin

Standard Color System (HSCS), Harlequin Chain Screening (HCS), Harlequin Display List Technology (HDLT), Harlequin

Dispersed Screening (HDS), Harlequin Micro Screening (HMS), Harlequin Precision Screening (HPS), HQcrypt, Harlequin

Screening Library (HSL), ProofReady, Scalable Open Architecture (SOAR), SetGold, SetGoldPro, TrapMaster, TrapWorks,

TrapPro, TrapProLite, Harlequin RIP Eclipse Release and Harlequin RIP Genesis Release are all trademarks of Global

Graphics Software Ltd.

Protected by U.S. Patents 5,579,457; 5,808,622; 5,784,049; 5,862,253; 6,343,145; 6,330,072; 6,483,524; 6,380,951;

6,755,498; 6,624,908; 6,809,839.

Other U.S. Patents Pending

Protected by European Patents 0 803 160; 0 772 934; 0 896 771; 672 29 760.8-08.

Portions licensed under U.S. Patent No. 5,212,546; 4,941,038.

TrueType is a registered trademark of Apple Computer, Inc.

The ECI and FOGRA ICC color profiles supplied with this Harlequin RIP are distributed with the kind permission of the ECI

(European Color Initiative) and FOGRA respectively, and of Heidelberger Druckmaschinen AG (HEIDELBERG).

The IFRA ICC profiles supplied with this Global Graphics Software are distributed with the kind permission of IFRA and of

GretagMacbeth.

International Cooperation for Integration of Processes in Prepress, Press and Postpress, CIP4, Job Definition Format, JDF and the CIP4 logo are trademarks of CIP4.

Adobe, Adobe Photoshop, Adobe Type Manager, Acrobat, Display PostScript, Adobe Illustrator, PostScript, Distiller and

PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries which may be registered in certain jurisdictions.

Global Graphics Software Ltd is a licensee of Pantone, Inc. PANTONE cations for accurate color. PANTONE

¬© Pantone, Inc., 1991.

¬Æ

, Hexachrome

¬Æ

Colors generated by ScriptWorks are four-color process simulations and may not match PANTONE-identified solid color standards. Consult current PANTONE Color Publi-

, and PANTONE CALIBRATED‚Ñ¢ are trademarks of Pantone, Inc.

Other brand or product names are the registered trademarks or trademarks of their respective holders.

ROOFMATE (PROOFREADY) PLUGIN FOR EPSON 4800

US Government Use

Epson StylusPro software is a computer software program developed at private expense and is subject to the following Restricted Rights Legend: ‚ÄúUse, duplication, or disclosure by the United States Government is subject to restrictions as set forth in (i) FAR 52.227-14 Alt III or (ii) FAR 52.227-19, as applicable. Use by agencies of the Department of Defense (DOD) is subject to Global Graphics Software‚Äôs customary commercial license as contained in the accompanying license agreement, in accordance with DFAR 227.7202-1(a). For purposes of the FAR, the Software shall be deemed to be ‚Äòunpublished‚Äô and licensed with disclosure prohibitions, rights reserved under the copyright laws of the United States.‚Äù Global Graphics Software Incorporated, 31 Nagog Park, Suite 315,

Acton MA 01720.

Chapter 1– Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1

Plugin features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2

1.4

System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Enabling the printer plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.6

1.7

Allocating additional memory to the RIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2– Output Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1

2.2

Epson output devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting device options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3

2.4

Adding new output devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Halftone screen selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 3– ProofReady Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1

Supplied ProofReady profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 4– Creating Page Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1

Creating a page setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.2

Page layout options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 5– Calibration and Color Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.1

Calibrating the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.2

5.3

5.4

Recalibrating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Creating an ICC profile and installing in the RIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Creating ColorPro profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Appendix A– Output File Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

A.1

Content generating tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

A.2

Checking tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

A.3

Examples of tag usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Appendix B– Post processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

B.1

Post processing substitution codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

B.2

Checking the command string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Appendix C– Memory Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

C.1

Determining processing overhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

C.2

Memory factor tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Appendix D– Quality modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

D.1

Quality mode table Epson4800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Appendix E– Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

E.1

RIP Monitor windows output messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

E.2

Problems with passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Chapter 1–Getting Started

This manual describes the Epson Stylus Pro 4800 printer plugin for the Harlequin RIP.

The plugin adds new output devices to the Harlequin RIP for use in your page setups. Each device provides support for a variety of inking regimes and Harlequin ProofReady profiles, which provide expert, out the box color management for printing proofs.

1.1 Plugin features

With its advanced 8-color Epson UltraChrome K3 ink technology, the Epson printer is capable of delivering prints with amazing color fidelity, gloss-level, and scratch resistance. The plugin has been engineered to support the full range of nine inks maintained by the printer, including five color inks, four black inks, with two userexchangeable black ink types.

Briefly, the plugin has the following features:

• A selection of Harlequin RIP plugin devices for outputting to the Epson Stylus Pro 4800 printer.

• A selection of ProofReady color management profiles, each designed to produce outstanding results on a range of Epson papers and inks.

• Support for HEDS1 and HEDS2, Global Graphics advanced screening technology.

1.2 System requirements

The following components are needed to install and run the plugin.

1.2.1 Windows

These are the platform requirements for a Windows operating system.

• Intel Pentium 4.1 GHz (or equivalent).

• 256 MB of RAM (512 MB recommended for variable sized dot devices).

• Microsoft Windows 2003 Server, Windows 2008 Server, Windows XP, Windows Vista and Windows 7.

Note: The plugin is supported on the same platform as the Harlequin RIP release.

1.2.2 Apple Mac

These are the platform requirements for a Mac OS X operating system.

• Intel Mac and PowerPC G4.

• 256 MB of RAM with virtual memory turned on (128 MB recommended).

• Mac OS X v.10.4.x (Tiger), 10.5.x (Leopard) and 10.6.x (Snow Leopard).

Note: The plugin is supported on the same platform as the Harlequin RIP release.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

1.2.3 Memory and disk space requirements

The following minimum system requirements are needed to run the Epson plugin plugin successfully:

• 128 MB RAM.

• 1 GB disk space (additional space may be required for large format or high-resolution output).

• For large format or high-resolution jobs, in the Configure RIP dialog box, increase the Printer buffer setting to at least 20000 KB and Disk space left for system to 20 MB.

For a precise method of determining the amount of memory required by the RIP when processing jobs for the

Epson plugin, see

Appendix C, “Memory Requirements” .

1.2.4 Supported RIPs

The Epson plugin has been approved for use with the following RIPs:

• Harlequin RIP v7.2 Genesis Release.

• Harlequin PLUS Server RIP v8.0r0 and later.

• Harlequin PLUS Server RIP v8.1r0 and later.

• Harlequin PLUS Server RIP v8.3r0 and later.

1.2.5 Optional items

Depending on how you want to process your print jobs, the following optional items will also be needed:

• Harlequin ColorPro, required for Harlequin RIP ProofReady

‚ color management technology.

• HEDS, HEDS1 and/or HEDS2‚ required for Harlequin Error Diffusion Screening (HEDS) technology.

• HDS or HDS Light screens‚ required for Harlequin Dispersed Screening (HDS) technology.

Your Harlequin RIP supplier will be able to provide you with necessary serial numbers to enable these features in the RIP.

1.3 Installing plugins

This section describes how to add plugins once the RIP is installed.

The InstallAnywhere installer allows you to easily install the Harlequin RIP products contained on the CD.

Instructions for installation can also be found in the install.htm file in the directory above the Install_xx file

(where xx is the customer name abbreviation). To ensure you have the necessary privileges for installing the

Harlequin RIP, you may have to log on as System Administrator.

The plugin requires the Harlequin RIP to be installed on the target machine. Install the RIP first, if this is a new installation.

Insert the Harlequin RIP Plugin CD-ROM and open it.

At the top level of the CD run the setup program for the operating system you are running.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Follow the InstallAnywhere screen instructions. Select the Next button to move onto the next screen and the Previous button to return to a previous screen. Every step of the install procedure is shown in the left hand window.

Figure 1.1 InstallAnywhere dialog

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

The Choose Plugins screen shows all the products available in the package. When you select a product, a short description of its function appears. Those products not checked in the list will not be installed.

Figure 1.2 InstallAnywhere Choose Plugin dialog

Note: Use the scroll bar at the right side of the display to view more selection options.

Use the Choose Install Folder screen to select the installation folder of the Harlequin RIP which is to be associated witrh the plugin. If you wish you can choose a different install folder to the default. Click

Choose... and navigate to the required folder. If at any time you wish to restore the default location click

Restore Default Folder. Click Next to move onto the next stage.

If you select an invalid or incorrect RIP folder an error message appears.

Read the agreement displayed in the Output Plugin License Agreement window. You must click the I accept... option to continue. Click Next.

The Pre-installation Summary creen allows you to examine your installation choices. If required, use the

Previous button to return to earlier screens and modify your selections, otherwise click Install to proceed with the installation.

The Install Complete screen indicates that the installer has finished. If any errors have occurred a message will be displayed. Click Done to exit from the installer. You can view the details of the errors by opening the xx

_InstallLog.xml

file which is located in the installation folder.

1.4 Enabling the printer plugin

The Epson plugin plugin needs to be enabled in the Harlequin RIP before it can be used, along with related plugins for screening and color management, unless you have already preset a key, in which case the plugin will already be enabled.

Start the Harlequin RIP. Choose Harlequin RIP > Configure RIP (or CTRL+R) to open the Configure RIP dialog. Click Extras to open the Configure RIP Extras dialog (

Figure 1.3

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Figure 1.3 The Configure RIP Extras dialog

To enable a plugin from the list available, you must enter a password as supplied by your Harlequin RIP supplier.

Select the plugin that you wish to add and click Add... the Enable Feature dialog box is displayed. Enter the supplied password in the dialog box and click OK.

Figure 1.4 Enabling RIP features

Click OK the close the Configure RIP Extras dialog, and then click OK to close the Configure RIP dialog.

The features will now be enabled in the RIP and may be used in your page setups to process jobs, as described in

Chapter 4, “Creating Page Setups”

1.4.1 Screening plugin compatibility

The Epson Stylus Pro 4800 printer is compatible with the following plugins:

• HEDS1, HEDS2: version 2.1 (for 7.x RIPs)

• HEDS v3 (for Harlequin PLUS Server RIP v8.0r0 and later)

Note: We do not recommend the use of AM screens, such as Elliptical or Euclidian, with Epson Stylus Pro printers because the nature of the inkjet dot shape and placement makes the results indifferent.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

1.4.2 Installing screening plugins

HEDS screening plugins must be installed and enabled in the Harlequin RIP before they can be used.

Depending on which device you choose to use the plugin uses a default screening method, as follows:

• 1-bit single dot size devices (

) HDS Super Fine screening

• 2-bit variable dot size devices (

VSD

) HEDS2 screening

Other screening methods are possible when using

devices, for example, HDS Fine/Medium/Coarse/Super

Coarse or HEDS1.

To use a different screen requires you to configure the Separation style from the Page Setup dialog.

To use any of these screening methods the relevant screening plugin(s) must be installed and enabled in the

Harlequin RIP. Failure to do this will cause the RIP to use Euclidean screening instead in the case of 1-bit devices, or, in the case of 2-bit devices, may cause the RIP to will result in Interpreter errors when a job is run such as

%%[ Error: rangecheck; OffendingCommand: setscreen ]%%

(HEDS is installed but not enabled) or

%%[ Error: rangecheck; OffendingCommand: setsystemparams; Info: Override screen name not known. ]%%

(HEDS is not installed). The following versions of the screening plugins are compatible with the ProofReady plugin:

• HEDS1 and HEDS2: version 2.1.1 or later (for 7.x RIPs)

• HEDS v3 (for Harlequin PLUS Server RIP v8.0r0 and later)

HDS screens are automatically installed with the RIP and just need to be enabled, however HEDS1 and HEDS2 must be installed and enabled separately, as described in the next section.

In addition to the screening plugins, the screening plugin requires a color management option, such as Harlequin

ColorPro

‚Ñ¢

to be enabled.

1.5 Location of plugin folders

Table 1.1

shows the correct Harlequin RIP installation folders for the Epson Stylus Pro 4800 printer and supplied screening plugins. This information is provided for reference only. Unless instructed by Technical Support, you should not move these folders or delete information contained in them or the plugins may cease to function correctly.

Source folder

\epson4800\

Description

Epson Stylus Pro 4800 printer

HEDS1 screening

Destination folder

\<RIP-folder>\SW\Devices\

\HEDS1\ (v7.x)

\HEDS1\ExtraStart\HEDS1Init\

(v7.x)

\HEDS2\ (v7.x)

\HEDS2\ExtraStart\HEDS2Init\

(v7.x)

\HEDS\ (v8.x)

HEDS2 screening

\<RIP-folder>\SW\Screenin

\<RIP-folder>\SW\Sys\ExtraStart

\<RIP-folder>\SW\Screenin

\<RIP-folder>\SW\Sys\ExtraStart

HEDS1+HEDS2 screening

\<RIP-folder>\SW\Extensions \Core

Module\heds

Table 1.1 Default installation folders for supplied plugins

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

1.6 Allocating additional memory to the RIP

To process jobs with the Epson plugin plugin you may need to allocate additional memory to the RIP printer buffer. The precise amount of memory required depends upon the nature of the job to be processed. Large, high quality jobs will require more memory than small, low quality jobs.

The basic memory requirements for the RIP is to provide sufficient memory to prevent the operating system from page buffering, which has the undesired effect of slowing the RIP down. At the other end of the scale, the more memory you can make available to the RIP the better it will process the job. Figures of 500 MB and above may be needed to process some large jobs, especially if options such as in-RIP trapping and screening are being used. In general, the more memory the RIP has available to use, the better it performs.

To set the printer buffer memory allocation, open the Configure RIP dialog ( Figure 1.5

) and enter a value into

the Printer Buffer box. Suggested settings are:

• Low/medium resolution prints on standard size pages: 20000 KB

• High resolution prints on standard size pages: 40000 KB

• Low/medium resolution prints on large size pages: 40000 KB

• High resolution prints on large size pages: 60000+ KB

Any other RIP memory settings should be configured according to the recommendations given in your RIP manual, since these vary according to the RIP release you are running.

Figure 1.5 Setting the printer buffer size in the RIP

1.7 Related documentation

For more details about the printer you are using, see the manufacturer’s documentation supplied with the printer or the relevant product support section of the manufacturer’s web site.

For more information on installing the Harlequin RIP, see the ECRM WorkMates Getting Started Guide.

For more information about the RIP, see the Harlequin RIP OEM Manual.

For more information about Harlequin ColorPro, see the ColorMate (ColorPro) User’s Guide.

AG50566 REV. 5

Chapter 2–Output Devices

The Epson Stylus Pro 4800 printer adds several new output devices to the RIP. Select the device you wish to use in your page setup, and the RIP will process jobs for the Epson Stylus Pro 4800 printer using the correct device settings for ink, media type, and output quality.

2.1 Epson output devices

Table 2.1

lists the Harlequin RIP output devices that are available in the page setup area of the RIP after installing the Epson Stylus Pro 4800 printer.

Device

SP4800 Roll

SP4800 Sheet

SP4800 VSD Roll

SP4800 VSD Sheet

Usage

Produces output for roll-fed paper using fixed sized ink dots, which can be small, medium or large.

Produces output for sheet-fed paper using fixed sized ink dots, which can be small, medium or large.

Produces output for roll-fed paper using varying sized ink dots.

Produces output for sheet-fed paper using varying sized ink dots.

Table 2.1 Epson Stylus Pro 4800 devices

Each device also has a selection of Harlequin ProofReady profiles for instant color management. See

“Calibration and Color Management”, page 19

for a list of ProofReady profiles that are available.

2.2 Setting device options

The devices installed by the Epson Stylus Pro 4800 printer plugin can be configured to suit your particular job processing requirements. For instance, you can change the media and ink types to suit those installed in your printer, change the output quality to increase throughput or print quality, and add post-processing commands which run after the job has been processed.

Note: The Epson 4880 plugin devices will be installed at the same time as those for the Epson 4800 as they are found in the same Epson4800 plugin tough different passwords are required.

The device options are accessed via the Configure Device dialog (

Figure 2.1

), by clicking Configure device in a page setup. Any changes you make to a device remain local to the particular page setup they were made in and

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

do not effect other page setups. This means you can have multiple page setups for the same output device, each with different device settings to suit your job processing needs.

Figure 2.1 The Configure Device dialog

The following device processing options are available:

Output method

Used to specify the output method for the job. Some output methods (for instance, LPT1) are only available if the operating system supports it. The following options are available:

File

Network

Outputs to the disk location that is specified in File Output, using the file template options (if any) that are specified in File template. This is the default output method for the plugin.

Outputs to the printer whose IP address and port number are specified in the

Network Output settings. The printer must be fitted with a suitable network interface card (NIC) for this option to work.

USB:<printer model>

Outputs to the printer which is connected via USB to the RIP machine. Where

printer model

> is the model name returned by the printer. Note that a printer will only appear when the host USB subsystem has acknowledged its presence.

SPL:<printer name>

Where <

printer name

> is the name by which the printer is known to Windows. The plugin outputs data via the Windows printer spooler, offering the possibility of outputting to connection methods not directly supported by the plugin.

File output

Used to specify a location for the output file. By default it is the RIP

folder, but you may choose any valid location on your system or network.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

File template

Used to enter a file naming template for the processed jobs. By default the file naming template is:

<dos>out<5unique><dot>epf

, which creates a file name that is cross platform (8.3 file name) and is suitable

for multi-page jobs. See Appendix A, “Output File Naming” for more information on using file naming tem-

plates.

IP address

Used to specify the network IP address or resolved name of the printer.

Port number

The TCP/IP port number used by the device to accept print jobs. If sending output to a single printer using a Jet-

Direct unit the Port number must be set to

9100

Some print servers can drive several printers simultaneously and the different physical connections or ports have their own numbers (which may vary with the type of server). For example, on a JetDirect unit with three output ports, the physical ports named 1, 2, and 3 have port numbers

9100

9101

, and

9102

respectively.

For genuine Epson network interface cards the following ports are commonly available:

9100

Used for raw (no protocol), binary and bidirectional communications.

515

Used for lpr-protocol, binary and unidirectional commumications.

For non-Epson network print servers consult the relevant documentation, but note that port

515

is less likely to work with non-Epson interfaces.

Media type

Used to specify the media that is installed in the printer.

Note: This setting can be overridden by the Profile Hook associated with a selected ProofReady profile.

Media size

This option is not enabled. Instead, use the options in the Page Layout dialog to specify the paper size, as

described in “Page, media and paper size”, page 18 .

Output bin

This option allows you to select either Manual feed or the Default paper bin when a Sheet device is selected.

Paper feed adjustment offset

Enter a value in the range between -70 and +70 to control the rate of feed of the paper for your particular printer.

The default value is zero. Positive values increase the rate of feed to reduce dark banding. Negative values decrease the rate of feed to reduce white banding. Try single digit (positive or negative values first.

Ink type

Used to specify the ink type that is installed in your Epson printer. Your printer manual should be able to advise you on the correct ink type to use for the paper you are using.You must choose the correct ink type, otherwise an error message will be generated and you will not be able to print.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Desired quality

Used to specify the overall output quality of the job. For excellent quality, choose Enhanced Microweave; for faster printing (but lower quality) choose Faster Microweav. For good quality/speed use Standard Microweave.

Use Printer Microweave to let the printer handle the microweave processing, if it can.

Compression

Used to specify the compression mode for data that is delivered to the printer. The available options are as follows:

None

Run length

Data is sent raw (uncompressed). Can result in longer print times.

Data is sent compressed, which often reduces the transmission time and hence speeds up printing.

Cut media after each page

If using a roll-fed device, select the

Cut Media

option to have the printer cut the paper at the end of each page.

Alternatively, select the

Print Line

option to print a thin line on the media where the cut would normally occur. The

Follow Panel

option means that the cut option configured on the printer is used.

Bidirectional printing

Select this option to use bidirectional printing, which allows the print head to print both when moving left to right and when moving right to left, thus speeding up printing. Be sure to check the output quality when bidirectional printing is being used.

Expanded margins

This option is applicable to Sheet mode only.

The normal margin specification defines the paper area upon which the printer can print with 100% accuracy, and is generally set to a conservative value. The Expanded margins option, for those printers which support it, make the printable area (usually at the top or the bottom of a sheet) larger, so that this extra area can be used for printing. The printing in the expanded margin area may be of reduced quality.

For example, a printer with a normal margin of 3 mm at top, left and right sides and 14 mm bottom: the expanded margins will now be 3 mm all round. Therefore, in this case you will gain 11 mm extra printable area at the bottom of the page.

If expanded margins are selected, the following message is printed in the log, to remind you that you are potentially sacrificing quality (in the expanded area).

Expanded margins selected. Print quality may be reduced in expanded region.

Note: If this option is disabled in the Configure Device the Expanded margins option is not available on the selected printer.

Account name

The name entered into this field is sent to the printer identifying the user who sent the job.

Use your login name as Account name

If this option is checked, the text in the Account name field is ignored and the login user name (the name that appears at the top of the Start menu) is sent to the printer.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Post processing

Use the panel options to set up your post processing options. You may enter any command that can be run from

a command line, and use the substitution codes listed in Appendix B, “Post processing”

to pass parameters to the command for executing. Note that Enable must be selected before the commands will execute.

Note: Windows commands interpreted by cmd.exe, such as echo, cannot be run directly, and should be included in a batch file.

2.3 Adding new output devices

The Harlequin RIP printer plugins supplied by Global Graphics often contain devices for more than one type of printer model. To limit the device list, however, only a single set of devices is added to the device list when a printer is enabled in the RIP. To add other devices you must add them manually, one at a time, as described next.

Open the Harlequin RIP Device Manger, by choosing Harlequin RIP > Device Manager.

From the plugin list, select the correct plugin.

Click New to open Device Manager Edit.

Enter the following details:

Name

A name for the device. This should match the device name (including the use of upper and lower case letters).

Choose a type from the list.

Type

Address

Leave blank.

Click OK to apply these settings.

The new device will be created and will appear in the list of devices available for selection in a page setup.

2.4 Halftone screen selection

The Harlequin RIP supplies halftone screens of various types for use with printers which support six, seven, eight or more inks. Screen selection is largely an automatic choice determined by the selected device. In particular, you should not change the default screening method when using ProofReady profiles as this will certainly affect the print quality.

A detailed explanation of the screens which are available and what effect they have on printed output is beyond the scope of this manual, but a brief description for each screening method is given below.

HEDS 1

HEDS 2

This is one of the in-RIP EDS screens used to produce the supplied profiles for

1-bit (single dot) device types. To use this screen, the HEDS1 screening plugin

must be installed and enabled, as described in “Screening plugin compatibility”, page 5

This is one of the in-RIP EDS screens used to produce the supplied profiles for

2-bit (variable size dot) device types. To use this screen, the HEDS2 screening

plugin must be installed and enabled, as described in “Screening plugin compatibility”, page 5

HDS Super Fine (HDS SF)

This is one of the screens used to produce the supplied profiles for biplane device types. If using a supplied profile based on this screen, ensure that this option is selected from the Edit Style dialog box accessed from the Separations

Manager. This screen is only available for use with biplane or 1-bit (single dot) device types.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

HDS Fine

HDS Medium

HDS Coarse

HDS Super Coarse

This is an alternative to HDS Super Fine, producing a coarser screen than HDS

Super Fine. This screen is only available for use with 1-bit (single dot) device types.

Chain

The Medium, Coarse, and Super Coarse variants of HDS are only recommended as special effects screens. These screens are only available for use with

1-bit device types.

This screen is only available for use with 1-bit device types.

AG50566 REV. 5

Chapter 3–ProofReady Profiles

To address the needs of print production professionals and their requirement for great looking proofs out of the box, the Epson Stylus Pro 4800 printer plugin includes ProofReady profiles for Harlequin RIPs.

3.1 Supplied ProofReady profiles

The ProofReady profiles supplied for the Epson Stylus Pro 4800 printer are listed in Table 3.1, page 14

. The table also lists the media type, resolution, halftone screening method and inking scheme used to create the profile. If a suitable profile is not available for your particular setup, you will need to create your own, by following the instructions in

Chapter 5, “Calibration and Color Management” , which describes the procedures for creating

ICC and ColorPro profiles and for calibrating the printer to ensure consistent and reliable results.

ProofReady profiles are available for selection in a page setup once a device that supports them has been

selected and the Harlequin ColorPro plugin has been enabled in RIP Extras, as described in “Enabling the printer plugin”, page 4

. For details on configuring a page setup to output to the Epson Stylus Pro 4800 printer,

see Chapter 4, “Creating Page Setups”

ProofReady profiles list

Figure 3.1 Page Setup dialog shown location of ProofReady profiles

ProofReady Profile Resolution

Media type

(part number)

Screening

Enhanced Matte 360 360 x 360 Enhanced Matte (S047125) HDS SF

Enhanced Matte 720 720 x 720 Enhanced Matte (S047125) HEDS2

Photo SemiGloss 720 720 x 720 Photo SemiGloss Paper

(S041779)

SemiMatte Proof 720 720 x 720 Proofing Paper SemiMatte

(S041724)

Premium SemiMatte

Photo 720

720 x 720 Premium SemiMatte Photo

(S041738)

HEDS2

Table 3.1 Epson4800 ProofReady profiles

Inking limits

Inking

PhotoInk2213

Matte

PhotoInk2213

Matte

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Premium Glossy 250g 1440 x 720 Premium Glossy Photo

1440 (S041742)

SemiMatte Proof 14401440 x 720 Proofing Paper SemiMatte

(S041724)

Premium Glossy 250g 2880 x 1440 Premium Glossy Photo

2880 (S041742)

Premium Luster 250g

2880

2880 x 1440 Premium Luster Photo

(S041737)

Proof White Semi-

Matte 720

Proof White Semi-

Matte 1440

Proof Paper Publication 720

Proof Paper Publication 1440

720 x 720

1440 x 720 Proofing Paper White Semi-

720 x 720

Proofing Paper White Semi-

Matte (SO42003)

Proofing Paper White Publication (SO41997)

1440 x 720 Proofing Paper White Publication (SO41997)

HEDS2

HDS SF

HEDS2

Table 3.1 Epson4800 ProofReady profiles

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213

Photo

PhotoInk2213 Matte is Cyan, Yellow, Magenta, Black, Light Cyan, Light magenta, Matte Black, Light Black,

Extra light black, sometimes shortened to CYMKLcLmMkLkElk, that is 2x Cyan, 2 x Magenta, 1 x Yellow, 3 x

Black.

PhotoInk2213 Photo is CYMKLcLmPkLkElk, where Pk is Photo Black (2x Cyan, 2 x Magenta, 1 x Yellow, 3 x

Black).

For more information see

Appendix D, “Quality modes”

Note: The inking limits values (when available) can be used when configuring a CRD (Color Rendering Dictionary) for a new ColorPro setup.

AG50566 REV. 5

Chapter 4–Creating Page Setups

Every job that you supply to the RIP takes its imaging options from a named page setup. You can keep a number of different page setups which you use regularly, like one that has Harlequin Precision Screening (HPS) turned on, and one that does not, one that previews images, and one that produces proofs for a particular paper type and resolution.

This section describes which imaging options to choose when outputting to the Epson Stylus Pro 4800 printer, and in particular which options to choose when creating press proofs.

4.1 Creating a page setup

Follow these steps to create a page setup for an Epson 4800 device that includes color management using a

ProofReady profile.

Figure 4.1 The Page Setup dialog is used to set job imaging options

In the Harlequin RIP, open the Page Setup Manager by choosing Harlequin RIP > Page Setup Manager, or using the shortcut key CTRL+S.

Click New in the Page Setup Manager to create a new page setup.

Click Device and choose the Epson4800 device that you wish to use when processing jobs. See

Chapter 2,

“Output Devices” for details about which devices are available.

To change any of the device settings, choose Configure device. See “Epson output devices”, page 8 for a

list of Epson4800 devices and their usage. In particular, the device options should be changed to suit your required output method, to add post processing commands (if needed), and to specify the correct media type and ink type. Do not, however, change the Quality setting from

Enhanced Microweave

when using

ProofReady profiles, as the profiles were created specifically for this setting.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Depending on which paper you are proofing for, select the correct profile from the ProofReady list. If the

correct paper type is not listed, you will need to create your own color profile, as described in “Creating

ColorPro profiles”, page 22

. See

Chapter 3, “ProofReady Profiles”

for a list of the ProofReady profiles supplied with the Epson4800 plugin.

The following imaging options should be left at their default settings:

Resolution

Style

Automatically set by the device.

Color

Calibration

Automatically set by the ProofReady profile.

Automatically set by the ProofReady profile. For optimum results you should choose a calibration set generated for your printer, rather than for a reference

Tone curves

Automatically set by the ProofReady profile.

Halftone screen selection is automatically set by the chosen ProofReady profile. Or it can be selected manually through the Separations Manager, by changing the Dot shape option in the style sheet for something else. Be aware, however, that ProofReady profiles are created for a specific screening method, and that changing it may result in unsatisfactory results.

Click Page Layout to open the Page Layout dialog and use the options that are available to set your media size and page layout settings. It is important to match the printer settings (as set on the printer control

panel) with the settings in Page Layout, if problems are to be avoided when outputting jobs. See Section 4.2

for further details on page layout.

When you have finished creating your page setup, click Save As and enter a name for your new page setup.

It’s good practice to choose a name which describes the purpose of the page setup. For example,

Epson4800 UCM Glossy Photo Wt1440

The new page setup can now be used in the Harlequin RIP to process jobs.

4.2 Page layout options

The following points should be noted when setting the page layout options for a job.

AG50566 REV. 5

Figure 4.2 Page Layout options

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

4.2.1 Margins and centering options

The margins and centering options control where the imaged page is printed on the media. There is a small margin around the edge of the media which must also be taken into account. The margin width varies from printer to printer, but your printer manual should be able to provide the necessary information.

The positioning of the job is also different for roll and sheet-fed devices:

Roll-fed devices

When the device is roll-fed, the page defined by the job is located at the top-left of the sheet, unless you set a non-zero Left Margin or select the Center page on

Media Width check box. You can also set both the Top Margin (TM) and the

Bottom Margin (BM). If you increase the Bottom Margin (BM) on a roll-fed device this adds space to the bottom of the page.

Note: The unprintable left margin is taken out of the image area unless a non-zero left margin is set, you are, therefore, advised to set the left margin to at least 5 mm.

Sheet-fed devices

When the device is sheet-fed, the origin of the page defined by the job is located at the bottom-left of the sheet. However, in the Page Layout dialog box of some versions of the RIP, only the Top Margin (TM) is editable with a default value of

0.00

inches. If these default settings are applied the job will be located at the top-left of the sheet. To prevent this, the Top Margin (TM) is applied as the Bottom Margin (BM). If your version of the RIP needs to swap these values a message confirming this is displayed in the RIP monitor window.

If you increase the Bottom Margin (BM) on a sheet-fed device, space cannot be added to the bottom of the page. This means that the space available on the sheet is reduced.

4.2.2 Page, media and paper size

In the context of the Epson4800 page layout options, page size refers to the dimensions of the frame within which text and images are printed, and media size refers to the dimensions of the paper loaded into the printer.

Epson, on the other hand, use the term “paper size” when talking about media size. To print unclipped pages, the page size must not exceed the media/paper size.

Most jobs specify their own page size, so setting the page size options is often not necessary. Exceptions include

EPS files and font proofs. Depending on which device is selected (roll or sheet) some of the sizing options will not be available if they are not relevant.

4.2.3 Transverse paper

All the standard paper sizes are available as transverse paper sizes, in which the dimensions of the paper have been reversed. For example, with A4 Transverse the paper is loaded into the printer with the landscape edge

(long edge) first. When using a transverse paper, all the other settings should remain at their default settings.

AG50566 REV. 5

Chapter 5–Calibration and Color Management

The quality of your color management will have a strong influence on the overall quality, gamut range, tonal depth and color accuracy of your prints. It is vital, therefore, that your color profiles are created correctly, using a properly calibrated printer.

The information in this section describes how to calibrate your printer. Once you have done this you will be able to create ICC and Harlequin ColorPro profiles, and use them to manage color in your jobs.

For more information on managing color in the Harlequin RIP, see the ColorMate (ColorPro) User’s Guide (for details on ColorPro).

5.1 Calibrating the printer

For optimum results, Global Graphics recommends that you calibrate the printer for each device, paper type and output resolution combination that you use. To provide a useful starting point, the plugin is supplied with a number of calibration profiles that define an ideal, or reference, state for the printer. These can be found in

RIP_folder\SW\Config\Devices\DevCalibration\

, one profile for each device type.

However, the response of your printer (the user printer) will undoubtedly differ from the reference printer.

Therefore, to obtain optimum output quality, you need to calibrate the printer so that it responds in the same way as the reference printer. The adjustments needed to correct the user printer so that it matches the reference printer are defined in a calibration set. The supplied calibration profiles are distinguished from user-generated calibration sets by being enclosed in parentheses, like these

( )

5.1.1 Print and measure an initial target

Create a page setup in the Harlequin RIP with the following options:

• Device - select the correct device

• ProofReady - select

(None)

• Calibration - select the paper/resolution type

In the Harlequin RIP, click Output > Print Calibration to open the Print Calibration window. From the list choose your page setup then click Print uncalibrated target.

Measure the printed target with Genlin, or your preferred calibration program. Genlin is installed with the

Harlequin RIP and is described in the Harlequin RIP OEM Manual.

In the Harlequin RIP, click Output > Calibration Manager to open the Calibration (Dot Gain) Manager. In the Manager click Device and select the correct device, then click New to open the Edit uncalibrated target for__¶ window.

In Edit uncalibrated target for__, click Profile and select the correct paper/resolution type. All other options should be left at their default settings (ensure Force solid colors remains unchecked).

In the Name field, enter an appropriate name for the initial profile, for example

Premium Glossy 250g

1440-1

Click Import > Import to read the calibration data.

Click OK until all open windows are closed.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

5.1.2 Print and measure a second target

Open your page setup (the one you used to print the initial target). From the Calibration list, select the calibration profile you just created (

Premium Glossy 250g 1440-1

) then click OK to close the page setup window.

Open the Print Calibration window. Select your page setup and click Print calibrated target (note this time you are selecting calibrated target). Measure the printed target.

Open the Calibration (Dot Gain) Manager. Select the appropriate device and choose the calibration profile that you made with the initial target.

Click the Copy button to create a duplicate of the profile. From the list select the copy and click Edit from calibrated target to open the Edit calibrated target for __¶ window.

Change the name of the profile to

Premium Glossy 250g 1440-2

and click Import > Import to add the calibration set.

Click OK until all open windows are closed.

5.1.3 Print and measure a final target

In the RIP, open your page setup and from the Calibration list select

Ucm Enhanced Matte 720-2

. Click

OK to close the window.

Open the Print Calibration window. Select your page setup and click Print calibrated target. Measure the target with Genlin or your preferred calibration program.

Open the Calibration (Dot Gain) Manager. Select the device and the calibration set you created for the second target.

Click the Copy button to create a copy of the profile. Select the copy and click the Edit from calibrated target button.

Name the profile

Premium Glossy 250g 1440-F

, to indicate it is the final calibration set. Click Import to read the calibration data, and click OK to add the calibration set to the Calibration Manager. You should remove all the intermediate calibration sets from the Calibration Manager to avoid choosing the wrong profile in a page setup.

Modify your page setup so that it uses the final calibration set.

5.2 Recalibrating

You should periodically recalibrate the printer to ensure consistent output results, as follows:

Click Output > Print Calibration to open the Print Calibration window. Select the appropriate page setup and click Print calibrated target. Measure the printed target.

In the RIP, click Output > Calibration Manager to open the Calibration (Dot Gain) Manager window and select the calibration set used in the page setup.

Click Edit from calibrated target to open the Edit calibrated target for __¶ window. Click Import > Import to read the calibration data and OK to save the profile. You may want to enter a new name for the profile to indicate it is an updated profile, for example

Ucm Enhanced Matte 720-Date

Modify your page setup so that it uses the new calibration set.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

5.3 Creating an ICC profile and installing in the RIP

Creating an ICC profile and installing it in the RIP consists of:

“Creating a suitable page setup”, page 21

“Printing and measuring an ICC target”, page 21 .

“Install the ICC profile in your RIP”, page 22

5.3.1 Creating a suitable page setup

To process the ICC profiling targets and output them to a printer, you will need to create a page setup which uses the correct printer model, media type, ink and output quality, as described in

Chapter 4, “Creating Page Setups” .

The page setup must not have any color management or calibration options selected; these should be set to

(None)

(No color management)

as applicable. Or, if you have created a Golden State profile for the printer, using Global Graphics SetGold utility for example, you may select the profile and use it as a suitable reference state for the printer. See Chapter 5 Configuring Output Formats in the RIPMate User Guide Manual for more information about creating page setups.

Having created a suitable page setup, use it to print the ICC profiling target and measure it using an appropriate software package.

The exact procedure you should use varies from package to package, but it is possible to give some general hints:

• Total area coverage: For some paper types the total area coverage should be limited. This depends on the paper, ink type, resolution and screening used, but a good guide is to limit the coverage for coated media

(Premium) to 280%, whereas matte media should be around 320%. Some experimentation may be required to determine the optimum setting.

• Number of patches: Although the number of color patches printed and measured is not always a guide to color quality, it is generally true that printing more patches produces better results for any given ICC profiling package.

Having created the ICC profile, install it using the menu option Color > Install ICC Profile. In the Linear

Calibration From menu in the Install ICC Profile dialog box choose either:

•

Linear

if the page setup you used contained no color management data (raw state); or

• The name of the calibration profile or calibration set that you used in the page setup (golden state). The calibration data is incorporated into the ICC profile when you import it. This means you can delete the temporary calibration profile or calibration set once you have imported the ICC profile.

You can create a color setup using this profile (see “Creating ColorPro profiles”, page 22

for details).

5.3.2 Printing and measuring an ICC target

Using your page setup, print the ICC target and measure it with your favorite profiling tool, and save the profile to a suitable location.

Some hints for obtaining better results:

• Total area coverage: For some paper types the total area coverage should be limited. This depends on the paper, resolution and screening used, but a good guide is to limit the coverage to 280% for uncoated papers and to 340% for coated papers. Some experimentation may be required to determine the optimum setting.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

• Black generation: The presence of black ink in highlights can in some cases be objectionable and can introduce an unnecessarily grainy appearance to some images. Select a setting which images black only in dark regions. (If it is not clear which settings will image black only in dark regions, select the minimum amount of black generation allowed by the ICC profiling package.)

5.3.3 Install the ICC profile in your RIP

The ICC profile can be installed using the Install ICC Profile dialog ( Figure 1 ).

Figure 1 The Install ICC Profile dialog

In your RIP, select Color > Install ICC Profile and select the profile you created above that you wish to import.

In the Install ICC Profile dialog, select the following options:

• Device profile: Check this option to add a profile for the output device.

• For Device: Select from the drop-down list the device the ICC profile is to be used for.

• Linear calibration from: Select from the drop-down list

Linear

if the page setup contained no color management data, or the name of the Golden state profile used to create the target.

• The name of the calibration profile or calibration set that you used in the page setup (golden state).

After installing this profile you can use it to create a color setup, as described next.

5.4 Creating ColorPro profiles

The selection of a calibration profile (pre Eclipse Release RIPs) or a ProofReady profile (Eclipse Release or later RIPs) automatically includes a default color setup to provide instant color management. The color profiles used in the default color setups are also available for the creation of your own color setups. Alternatively, you could also create a color setup using imported ICC profiles. See

“Creating an ICC profile and installing in the

RIP”, page 21

for further information on creating ICC profiles. Creating your own color setup allows you to specify the input profiles as well as other color setup options.

Follow these steps to create a color setup:

Choose the menu option Color > Color Setup Manager.

Choose the device for which you want to create this color setup from the Device menu.

For example, choose

SP4800 VSD Roll

Click New ColorPro Setup.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

In the New Color Setup dialog box, choose the options for the color setup you are creating.

For example, choose

3M Matchprint

for the CMYK input profile and

RGB

for the RGB input profile and then choose

Premium Glossy 250g 1440

as the output profile.

Choose Default Perceptual from the Output Rendering Intents menu.

Set the remaining options as desired. For details of these options see the ColorMate (ColorPro) User’s

Guide.

Click Save As to save this color setup.

Enter a name for the color setup in the Save As text box in the Save Setup dialog box. Click Save and then

OK to close the Color Setup Manager.

You may now use this color setup in a page setup.

AG50566 REV. 5

Appendix A–Output File Naming

Using text and tags you can automatically generate an output file name from the job name, job details (such as colorant information and resolution), or date and time information. The tags are entered in the File Template field in the Epson Configuration dialog box, and a complete list of supported tabs can be found in

Table A.1, page 24 .

Most tags are content tags, representing variables such as the date and time a job is processed; the other tags allow you to reject names that would be illegal in a specified operating system. The maximum length of variables can be specified by preceding the tag name with an integer. For example,

<5jobname>

truncates the job name to a maximum of five characters. Tags that produce numeric values are truncated from left to right, whereas tags that produce alphanumeric strings (strings containing the characters a-z, A-Z, and 0-9) are trun-

cated from right to left. See “Examples of tag usage”, page 26

for further details.

Fixed text can be part of the file name stem or extension. For example, stem_

<3unique><sepname><dot>epf would generate a file name of the form: stem_

000Cyan.epf

, in which stem_ can be any identifying text.

Try to use a file name extension that does not clash with any established convention. The extension epf

is a suggestion only and is formed from the initial letters of Epson Printer File

Note: This file naming scheme does not provide useful file names derived from job names that contain doublebyte characters.

A.1 Content generating tags

The following tags are available and can be used in any order

Tag Description

<date>

<dot>

<job#>

The color space of the device, such as PhotoInk.

The name of the separation, such as

Cyan

The date when the job is processed, in the format

YYYYMMDD

, unless a truncated form is specified.

Separates the stem of the file name from the file extension, and appears as a period character (

) in the file name. For example,

stem

<dot>

ext appears as stem.ext

. The use of the

<dot>

tag enables the verification of the stem and extension lengths.

The job number allocated by the RIP. Automatic numbering means that successive jobs have incremented job numbers: 000, 001, 002, 003, and so on.

The page buffer name without the page number prefix and without characters illegal to the operating system. White space characters are used, if present in the job name.

The page buffer name without the page number prefix, and using only alphanumeric characters (a-z, A-Z, 0-9). White space characters are not used.

Table A.1 Output file name tags

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Tag

<page#>

<time>

<xres>

<yres>

Description

This gives the job name without the separation name in brackets, For example, where <jobname> would give myjob(PANTONE Reflex Blue CVC)

<jobonly> will give myjob

The page number (allocated by the RIP), within the current job. For example: 002.

The page number prefix from the page buffer name, such as

, and so on.

You can use this tag to include the characters from the prefix before the full stop in the job name (that is, the prefix, not including the dot and space characters).

The time when the job is processed, in the 24-hour format

HHMMSS

, unless a truncated form is specified.

A unique sequence number used to make file names unique when outputting files to a directory.

The horizontal resolution of the page, as specified in the page setup.

The vertical resolution of the page, as specified in the page setup.

Table A.1 Output file name tags

A.2 Checking tags

The plugin always checks the legality of an automatically generated file name against the requirements of the operating system on which the RIP and the plugin are running.

To enable portability of files from one operating system to another, you can also use tags to specify the operating system for which generated file names must be suitable. The use of these tags changes the rules by which a file name is deemed valid. The tags do not modify the file names generated, but cause error messages if the file name is invalid.

For example, you can create the template

<dos>Averylongfilename.epf

, but an error is generated. This error occurs because DOS file names require the 8.3 format for stem and extension, which this template fails to meet

by having 17 characters in its stem. Table A.2

lists the operating system tags.

Tag

<ascii>

<dos>

<mac>

<unix>

<win32>

Description

This limits the character set of the file name (from the point of the tag onwards) to ascii characters in the range 32 (0x20) to 126 (0x7E). Char-actors outside this range are discarded. If the user wishes to substitute invalid characters rather than discarding them, prefix the ascii tag with the substitution character value in decimal.

Verifies that the file name is a legal file name for the MS-DOS operating system.

Verifies that the file name is a legal file name for the Mac OS 9.x operating system.

Verifies that the file name is a legal file name for the Mac OS X operating system.

Verifies that the file name is a legal file name for the UNIX operating system.

Verifies that the file name is a legal file name for Windows operating systems.

Table A.2 Operating system tags

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

A.3 Examples of tag usage

The following examples demonstrate the format of strings produced by individual tags. Some examples also show how the tags may be used in combination to form a template. The examples are based on these job details:

Page buffer name: 1. Uncalibrated Target: Epson Stylus Roll-Fed 4-Color Target.

Date: 10th of March, 2007.

Note: When creating multiple copies of a file, the same page buffer provides tag information. If a template contains dynamic tags (such as

<time>

, where the value changes each time that a page buffer file is output), then multiple copies of the file are created. If the template contains just static tags (such as

, where the job name remains constant), then a single output file is created because previous files are overwritten.

This tag includes the color space of the device in the file name string.

For example, the template

<colorant><dot>epf

produces a file name of the form

PhotoInk.epf for a device using a PhotoInk color space.

The tag

can be used to include the name of the separation in a file name, for example:

Cyan

You can include just the first letter of the separation by using the tag

<1colorname>

, which truncates the separation name to its first letter. If a composite style is used this is indicated by the string

Composite

. If a monochrome style is used this is indicated by the string

Gray

<date>

The template

<date><dot>epf

produces the file name

20070310.epf

. You can remove the year information by using the tag

<4date> to produce the file name

0310.epf

<dos>

The use of this tag verifies that the file name is suitable for use in a DOS operating system. Illegal characters such as a colon, and white space characters are removed.

For example, the template

<dos><jobname><dot>epf

, would generate an illegal file name because the job name is greater than the eight characters allowed in DOS operating systems. Truncation can be forced by using the template

<dos><8jobname><dot>epf

, which produces the file name

Uncalibr.epf

<dot>

This tag separates the file name stem from the file name extension and enables the verification of their lengths. It is particularly necessary when creating file names compatible with DOS and Windows, otherwise the extension may be considered as part of the file name.

For example, the template

<dos><8jobname>.epf

would cause an error because the dot is removed as an illegal character and epf

is then considered part of the file name stem.

<job#>

You can use this tag to include the job number in the file name string. The default length of the number is three digits, so the first file name created with this tag would be 000, unless a different length is specified.

You can specify the length of the job number by preceding the

<job#>

tag with an integer. For example,

5job#

> creates job numbers five digits long.

In multi-page jobs use the

<page#>

tag as well as the

<job#>

tag to differentiate between the different pages of a job.

This tag ensures that only legal operating system characters are used in the job name.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

For example, in the RIP running under any Microsoft Windows operating system, the template

<jobname><dot>epf

can produce the file name

Uncalibrated Target Epson Stylus Roll-Fed 4-

Color Target.epf

. The colon character (

) is removed from the file name, because this is not a valid file name character for any version of Microsoft Windows.

This tag ensures that only alphanumeric characters are used in the job name.

For example, in the RIP running under a Windows operating system, the template

<jobname1><dot>epf can produce the file name

UncalibratedTargetEpsonStylusRollFed4ColorTarget.epf

. The colon, hyphens and white space characters are removed from the file name, because they are not alphanumeric characters.

The use of this tag verifies that the file name is suitable for use in a Mac OS X operating system. Illegal characters such as a colon, or double-quotation marks are removed.

For example, the template

<macosx><jobname><dot>epf

produces the file name

Uncalibrated Target

Epson Stylus Sheet-Fed 4-Color Target.epf

, in which the colon has been removed.

<page#>

You can use this tag to include the page number in the file name string.

For example, the template

<page#><dot>epf produces a file name of the form

001.epf

. It is advisable to use this tag with the job number tag to differentiate between the same pages of different jobs.

You can use this tag to include the page number prefix from the page buffer name in the file name string.

For example, based on the page buffer name above, this tag produces the string

<time>

You can use this tag to include the time a file is processed in the file name string.

For example, if printing to file at 15:39:36 (approximately 3:39 pm) this tag produces the string

153936

You can use this tag to generate a unique sequence number for the page. The default length of the number generated is four digits long, so the first number would be

0000

. The length of the number can be specified, as detailed in the example for the tag

<job#>

, e.g.

<2unique>

When restarting the RIP, the unique numbering will attempt to restart at its initial value, for example:

0000

However, if a file exists with that number, the next available unique number is used.

<unix>

The use of this tag verifies that the file name is suitable for use in the UNIX operating system. Illegal characters such as an asterisk, colon, and quotation marks are removed. The

<dot>

tag cannot be used with this tag because file names in UNIX are composed of a single string and are not considered to have separate file extensions.

For example, using the template

<unix><255jobname>.epf

produces the file name

UncalibratedTargetEpsonStylusRoll-Fed4-ColorTarget.epf

, in which the colon and white space characters have been removed.

<win32>

The use of this tag verifies that the file name is suitable for use in a Windows operating system. Illegal characters such as an asterisk, colon, or quotation marks are removed.

For example, the template

<win32><jobname><dot>epf

produces the file name

Uncalibrated Target

Epson Stylus Sheet-Fed 4-Color Target.epf

, in which the colon has been removed.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

<xres>

You can use this tag to include the horizontal resolution of the page in the file name string.

For example, you can differentiate between pages with a resolution of 1440 x 720 dpi and 720 x 720 dpi by using this tag. This tag produces a string such as

1440

720

, depending on the horizontal resolution.

<yres>

You can use this tag to include the vertical resolution of the page in the file name string. For example, on a page with the resolution 1440 x 720, this tag produces the string

0720

AG50566 REV. 5

Appendix B–Post processing

The Configuration dialog box has a Post processing: Command text box in which you can enter commands and their options, in the same way as a command line. These commands are carried out after the page buffer has been sent to the printer or once the output file has been created. The commands available depend on the platform on which you are running the RIP.

The command can be a simple batch file or a complex application, provided that you give the command all necessary options and information as a command; a command needing operator intervention is likely to cause problems. You can specify options understood by the application, and data such as the path of the relevant input or output files.

You can use post processing commands to convert the file to a different format or to send somebody an e-mail notifying them that a job has been processed. There are several other possibilities, such as extracting information for use in reports, limited only by your ability to obtain or create a suitable application and to supply information to it.

If the string you enter into the Post Processing: Command text box refers to a post processing application then this application must be available on the computer running the RIP. The string should normally include the file extension and the full path name of the application file. However, you can type just the file name if the application file has the extension

.EXE

and is in one of the directories specified by the

PATH

variable.

Your string can contain substitution codes, which are expanded by the RIP. See the next section for details.

B.1 Post processing substitution codes

When using the post processing feature of the Epson4800 plugin, the RIP recognizes the substitution codes in the following list. You can insert an integer between the percent character and the letter code, to restrict the maximum number of characters used in the result string. For example,

%6j

represents the first six characters of the job name.

Post processing substitution codes

Description

The current separation color, represented by a string with a default length of one character. Typical separation names are

Cyan

Magenta

Yellow

and

Black

. Examples for the default length are:

, and

The current date in the format YYYYMMDD, with a default string length of 8. For example, 26 April 2007 becomes: 20070426.

The output file name, as created by the template specified in the

File

Output: File Template

text box in the Configuration dialog box. For example: out00001.epf

The current page buffer name as shown in the Output

Controller/Monitor, after removal of the numeric prefix and non-alphanumeric characters. For example: the page buffer name

1. Apple.ps

becomes

Appleps

The current page buffer name as shown in the Output

Controller/Monitor. For example:

1. Apple.ps

Table B.1 Post processing substitution codes

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Post processing substitution codes

Description

The current job number, an integer that the RIP increments each time it processes a new job. For example:

The full output directory path specified in the File Output: Change... text box. For example:

C:\SWNT\SW\Output\

The current page number within the job. For example:

The job resolution in dots per inch. For example:

300

The current page buffer name as shown in the Output

Controller/Monitor, after removal of the numeric prefix, any bracketed text and any text that appears before a colon (:), semi-colon (;), a commercial at symbol (@), and a hyphen (-). For example: the page buffer name

1. Apple-test(new).ps

becomes test.ps

The current time in the format HHMMSS, using the 24 hour clock. The default length is 6. For example, a time just after 7:30 pm would be shown:

193211

The current file name suffix. For example: epf

The current file name stem. For example: out00001

Table B.1 Post processing substitution codes

B.2 Checking the command string

The RIP reports each command and the working directory in the main RIP monitor window, in the following form. Italics show which text can vary with different jobs and page setups.

Running post-job command "C:\test\logfile.bat out00002.epf 112442" in directory

C:\SWNT\SW\Output

The above example refers to a batch file (logfile.bat) which uses a program to send an e-mail confirming that a job has been processed. The e-mail contains the output file name (out00002.epf) and the time it was processed (approximately 11:24). These details were provided by using the substitution codes

and

in the post processing text box. The working directory is the output file folder specified in the File Output: Change... text box. If no output file folder is specified then the working directory is the

directory in which the output file is created. This includes any resolution component indicated by an Add resolution to path setting in the plugin configuration dialog.

For a more thorough test of how commands behave when used at the command prompt of the operating system, try creating a batch (

.BAT

) file with these contents and using the name of the batch file as the application in your command string.

echo %1 %2 %3 %4 %5 %6 %7 %9 pause

Note: If you have problems with a command, test it outside the RIP by opening a command window and running the command manually. If you think that you have used any substitution code from which the RIP might generate an element containing characters with a special meaning to your operating system, try surrounding that code with double quotes. For example, use

"%f"

in the post processing text box rather than just

If there are no special characters involved, look at the number of substitution codes that you are using and the length of the command string both before and after expansion of the substitution codes. The limit on the length of the expanded command string varies with the Microsoft Windows environment but you should have no problems with up to 125 characters in the string after expansion.

AG50566 REV. 5

Appendix C–Memory Requirements

To operate efficiently and reliably, the Harlequin RIP requires an adequate amount of memory when processing jobs. Depending on the size and complexity of the jobs you wish to process, you may need to allocate additional memory resources to the RIP when processing output for the Epson Stylus Pro 4800 printer.

C.1 Determining processing overhead

The following procedure will help you to determine how much memory overhead is required for the RIP when processing a job for the Epson Stylus Pro 4800 printer. Before you begin, you will need to know what the page size, output resolution, screening method and microweave settings are for the job(s) you wish to process. This information is available through the page setup dialog you are using to process the job.

Using the tables in “Memory factor tables”, page 33

, look up the figures for the job you wish to process.

For example, if the job is being output at 1440 dpi, using enhanced microweave with HEDS2 screening, the memory factors will be

8.2 / 2.2

8.2

is the printer buffer overhead, and

2.2

is the minimum memory left for system overhead.

To calculate the printer buffer overhead:

Printer buffer overhead = (Page width in inches) x (printer buffer factor) + 5

Example:

Page width:

inches

Printer buffer factor:

8.2

Printer buffer overhead:

(17 x 8.2) + 5 = 144.4 MB

To calculate the total printer buffer required by the RIP:

Total printer buffer = (Printer buffer overhead) + (Printer buffer baserecommendation)

The base-recommendation value for the printer buffer is

20 MB

, so the total printer buffer, using the example figures, is:

144.4 + 20 = 164.4 MB

, or approximately

169000 Kbytes

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Enter the figure of

169000

in the Printer buffer box of the Configure RIP dialog, as shown

Figure C.1

Figure C.1 The Configure RIP dialog

To calculate the minimum memory left for system overhead:

Minimum memory left for system overhead = (Page width in inches) x (minimum memoryleft-factor)

Example:

Page width:

inches

Minimum memory left factor:

2.2

Minimum memory left for system overhead:

17 x 2.2 = 37.4 MB

To calculate the total minimum memory left for system required by the RIP:

Total minimum memory left for system = (Minimum memory left for system overhead) +

(Minimum memory left for system base-recommendation)

The base-recommendation value for the printer buffer is

30 MB

, so the total printer buffer using the example figures is:

37.4 + 30 = 67.4 MB

, or approximately

69000 Kbytes

Enter the figure of

69000

in the Minimum memory left for system box of the Configure RIP Options dia-

log, as shown Figure C.2

Figure C.2 The Configure RIP Options dialog

Click OK to confirm your new memory settings.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

C.2 Memory factor tables

Resolution

(dpi)

360

720

1440

2880

Enhanced

Microweave

Standard

Microweave

0.2 / 0.4

0.6 / 1.1

0.2 / 0.2

0.6 / 0.6

1.1 / 1.1

4.1 / 4.2

Table C.1 Memory factors

Fast

Microweave

0 / 0

0.6 / 0.6

1.1 / 1.1

4.1 / 4.2

Printer

Microweave

0 / 0

N/A

0 / 0

Resolution

(dpi)

360

720

1440

Enhanced

Microweave

Standard

Microweave

1.2 / 0.7

4.1 / 2.2

1.2 / 0.4

4.1 / 1.2

8.2 / 2.2

Table C.2 Memory factors

Fast

Microweave

0 / 0

4.1 / 1.2

8.2 / 2.2

Printer

Microweave

0 / 0

AG50566 REV. 5

Appendix D–Quality modes

This section provides a table of the various quality modes available for each available resolution.

D.1 Quality mode table Epson4800

Resolution (dpi)

VSD 360 / 360

VSD 720 / 720

VSD 1440 / 1440

VSD 2880 / 2880

Fixed 360 / 360

Fixed 720 / 720

Fixed 1440 / 1440

Fixed 2880 / 2880

Printer Faster Normal

Yes

Yes No

Table D.1 Quality modes

Yes

Best

Yes

AG50566 REV. 5

Appendix E–Troubleshooting

This section describes messages that may appear in the RIP monitor window and offers troubleshooting advice and tips on how to maximize your use of the plugin. If you have difficulty understanding any message, report the exact message to your support organization.

Note: Most of these messages appear in the RIP monitor window and are preceded by details of the plugin and device that you are using. For example:

ProofReady - Epson 4800 Sheet

Message...

E.1 RIP Monitor windows output messages

Any problems that occur when outputting a job will be reported by the RIP in the RIP monitor window. Most output problems can be cleared by aborting the output job in the RIP before removing the printer media.

E.1.1 Printer messages

The following printer-related messages may by reported by the plugin.

Auto sheet feeder will not be used because it is not allowed with the selected media

This message indicates that manual sheet feed has been forced on media that does not support it. These include: Smooth Fine Art Paper, Textured Fine Art Paper, Velvet Fine Art Paper.

Auto cut has been switched off because it is not allowed with the selected media

This message indicates that auto-cut has been prohibited on the selected roll media type.

Printer rear cover open

Output will stop until the printer cover is closed.

Multi-sensor error

See printer documentation.

Cleaning failed

See printer documentation.

Ink levels K n%, C n%, M n%, Y n%, LC n%, LM n%, LK n%, ELK n%

Where n%

represents a number followed by a percent sign, for example,

87%

. Indicates the remaining percentage of ink for each of the cartridges on an 8-color printer loaded with 8-color inks.

Warning - ink low - cartridge %s

Where

is a string, for example,

, or

. This message indicates that one or more ink cartridges are getting low the numbers refer to the cartridge positions, from left to right, on the printer. (The numbers should also be printed above the ink cartridge position on the printer).

means cartridge number 3 is low.

#2, #5, #7

means cartridge number 2, cartridge number 5 and cartridge number 7 are all low.

The selected ink combination does not match this printer

This error occurs when the print job does not match the inks that are installed in the printer. For example, if you attempt to send a job to the printer that contains matte black and the printer only has photo black installed.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Note: The plugin is only able to output this message when it is able to query the printer and check the ink variant. On unidirectional communication connections, or if the printer is in a state which prevents it responding to the query, the plugin may be unable to detect the mismatch before it starts to send the job. In such cases, a command-error will occur on the printer.

Control panel in use

This message occurs when the printer control panel is being used. The plugin resumes printing when the printer allows it, that is, when the control panel is not being used.

Paper gap error

The paper is too thick or the adjustment lever is in the wrong position.

Cutter position error

The roll paper cutter did not return to the correct position.

Cutter jam

The cutter is jammed.

Ink color error

This error occurs when the ink is changed during a print, for example, the black ink was changed from

Photo to Matte.

Ink combination error

An ink combination error.

Warning: Top and Bottom Margin values will be swapped.

This warning informs you that your version of the RIP needs to swap values specified in the Page Layout dialog box for the top and bottom margins to correctly deal with sheet-fed devices.

Device overrides applied for profile (profile details)

The device settings required by supplied profiles are known to the plugin and these settings override any settings you may have changed. This is to ensure correct color management.

SWOP proofing overrides applied for profile 'SWOP-cert SemiMatte Proof'

The device settings required by the SWOP certified profile are known to the plugin and these settings override any settings you may have changed. This is to ensure correct color management.

Warning - no image in the printable region

This warning is rare and only appears when an image smaller than the unprintable area is positioned at the edge of the media so that it is completely clipped. In this case, the job is processed but the output page will be blank.

Page Layout media size is less than the Configure Device paper size - clipping may occur.

This message can appear if you create a page setup that uses a custom paper size and you edit the page setup so that it uses a larger, standard paper size. If this is the case, clipping may occur because the media values in the Page Layout dialog used for the custom paper size are still associated with this page setup and in this instance they specify the maximum paper size. You can either change the media values in the Page

Layout dialog box so that they are larger than the paper size chosen in the Configure Device dialog box, or you can create a completely new page setup.

Image width too large for device - clipping may occur

Image height too large for devices

These messages can occur when limits on the movement of the head prevent the printer from using the entire printable area of the media.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Failed to allocate buffers for swathes (

kb)

If this message occurs, try increasing both the Minimum memory left for system and the Memory for the

RIP by the amount shown in the brackets. On a PC platform, both of these options are in the Configure RIP

Options dialog box, accessed by choosing Harlequin RIP > Configure RIP and clicking Options.

On a Macintosh platform, you must use the menu option File > Get Info to configure the memory for the

RIP. You can then set the preferred size to your chosen value.

Failed to allocate buffer for compression swathe

Failed to allocate SwatheArray

Failed to allocate BandsCache; not enough memory

If any of these messages occurs, try increasing the Minimum memory left for system and the Memory for the RIP by multiples of 1 MB. On a PC platform, both of these options are in the Configure RIP Options dialog box, accessed by choosing Harlequin RIP > Configure RIP and clicking Options.

Failed to allocate band buffers (

Kb); not enough memory

If this message occurs, try increasing both the Minimum memory left for system and the Memory for the

RIP by the amount shown in the brackets. On a PC platform, both of these options are in the Configure RIP

Options dialog box, accessed by choosing Harlequin RIP > Configure RIP and clicking Options.

Alternatively, you can increase the Printer buffer by the amount shown in the brackets. This option is also within the Configure RIP Options dialog box.

Not enough system memory to output this page

This message can appear during output when the RIP is not supplying enough memory for the needs of the operating system on the computer. Set Minimum memory left for system to 10000 Kb in the Configure RIP

Options dialog box. You may need to set a higher figure for large page sizes.

Warning - this printer (printer name) may not be the expected model

The model name returned by the printer is not one of the expected names for the output device. In this case, the quality of the output cannot be guaranteed.

Unable to confirm printer status/model

Either the connection method does not support bidirectional communications, or the initial attempt to determine the printer status and model name did not produce a reply within 15 seconds. The plugin will assume that the printer is in the correct state and is the correct model and it will send the job to the printer.

Warning - printer status is unreliable

This messages indicates that the status information being returned by the printer may be corrupted.

Command error on printer or wrong ink type

If this message occurs, you will need to restart the printer. You should also check that the ink type selected in your page setup is correct for the printer, before resubmitting the job.

The selected ink type is incorrect for this printer

This message can occur when the job or associated profiles are for a different ink type to that installed in the printer. You should ensure that the Calibration and Color profiles used in your page setup are for the ink type installed in your printer (Photographic Dye

‚Ñ¢

versus Archival

‚Ñ¢

), or that you are using the correct

UltraChrome Black (Photo Black versus Matte Black). You should also check that the Ink type, as chosen in the Configure Device dialog, is correct.

%%[Error - Inking regime <name> is not a dictionary ]%%

Each inking regime name should be associated with a value comprising a PostScript language dictionary.

%%[Error - Inking regime <name> has not been defined ]%%

This message appears when the inking regime information necessary for the particular ink, screening, inking regime and resolution combination is missing. Check that you are using a supported combination.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Warning - ink type not recognized and will not be verified

This message appears when the ink type information associated with a job has not been recognized. In such cases, the plugin cannot verify whether the printer is using the ink type required by the job.

Printer communication failed (error details )

Unable to connect to printer (error details )

The text and numbers in parentheses varies, depending on the reason why the RIP cannot connect to the printer. The final number is the error code generated by the operating system and can be used by GGS to determine the exact cause of the connection failure.

Unknown output method selected

Unable to connect to printer (%s : %d, %d)

Unable to open output (error details)

These messages may appear with a variety of text replacing error details. The text varies according to the method of output that you chose in the Epson Configuration dialog box and the exact problem. This text should help you diagnose the problem. If you have difficulty understanding any message, report the exact message to your support organization.

Note: The above message may appear if both the parallel port and the USB port are connected to the printer at the same time. In this case, the parallel port is disabled by the USB port. To enable the use of the parallel port, unplug the USB connection at the printer. The printer will immediately process any page buffers.

Warning - printer maintenance required (see printer panel)

Warning - printer ink cover open

Warning - printer bin 1 paper low

Warning - printer bin 2 paper low

Warning - <ink name> ink low

Warning - <ink name> ink out

Paper jam

Ink out

Paper size /type check error

Paper eject error

Print head too hot

Paper too thick

Printer nozzle check error

Wrong ink cartridge

Printer busy printing through another interface

Printer cover open

Printer paper lever released

Paper out

Wrong paper type or paper type select not complete

Printer initializing

Paper not cut

Printer paper set lever released

Printer ink cover open

Printer ink lever released

Printer is waiting for the ink to dry

Paper not straight

These messages are relayed directly from the printer and should also appear in the control panel of your printer. See the manual for your printer for details on how to respond to these error or status messages.

Warning - CMYK data being output to photo printer

You are sending CMYK direct to the printer, bypassing the PhotoInk conversion.This is unlikely to result in good output.

Warning - Media Type '%s' is not known

The media name supplied in the PSU is not defined in the mediaTypeNames file.

Warning: Media %s is based on unknown name '%s', in file %s

The media name was found in the media type file, but the plugin does not know how to handle it.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

/Base value not a string in file %s

The media name is converted internally to a media ID using the /Base name, but the name provided is not recognized.

Unknown error (

) reported by printer

This message appears if the RIP is unable to recognize the error reported by the printer. A brief error message may appear in the Output Controller/Monitor dialog box, which may help you diagnose the problem.

If necessary, report the error to your supplier for further details.

Unable to create file - "

full path name of output file

This message informs you that the RIP was unable to create an output file. The full path name of the file that it tried to create is specified within the quotation marks. Check that the file does not already exist and that the output folder is not read-only. You must also ensure that enough disk space is available.

Unable to create file using path "full path name of output file" and template "file name

template"

This message informs you that the RIP was unable to create an output file due to a problem with the file path of the output file and the file name template. Check that all the specified directories in the full path name exist and are writable. If an earlier error message indicates that an invalid file name template was specified, you must enter a valid file name template in the Configure Device dialog box.

Job output for "job name", sent on

< date

> < time

This message informs you that the RIP has finished sending the job to the printer. The job name is specified in quotation marks and is followed by the date and time at which the job was output.

Job output for "job name", filename "full path name of output file", finished on

< date

< time

This message informs you that the RIP has finished creating an output file. The job name and the full path name of the output file are specified in quotation marks, followed by the date and time at which the output file was closed.

Job output for "job name" is aborting - Printer will print data that it has already received.

This message can appear during printer output. It is not a separate error, only an indication of how the RIP and the printer are recovering from an error reported in an earlier message.

If the RIP aborted due to a problem with the parallel (LPT1) connection method, you may be prompted to retry or cancel the job. If this is the case, click Cancel to abort the job and then check that the printer is switched on and connected using the correct cable.

Job output for "job name" is aborting

This message can appear during the creation of an output file. It is not a separate error, only an indication of how the RIP is recovering from an error reported in an earlier message.

Job output for "job name", aborted on

< date

> < time

This message informs you that the RIP has aborted output of the job to the printer. The reason for aborting the job should be reported in an earlier error message.

Job output for "job name", filename "full path name of output file", aborted on

< date

< time

This message informs you that the RIP has aborted the creation of an output file. The reason for aborting the job should be reported in an earlier error message.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Job output for "job name" using path "

ull path name of output file" and template "file

name template", aborted on <date> <time>

This message informs you that the RIP has aborted the creation of an output file. The reason for aborting the job should be reported in an earlier error message.

Printer maintenance tank full

Each time you perform nozzle cleaning cycles after changing ink sets on some Epson Stylus Pro printers, the excess ink is captured in the printer maintenance tank. This error message appears when the printer maintenance tank is full. In this case the current job is aborted. You should either empty the printer maintenance tank or replace it.

Printer maintenance tank removed

This warning appears when the printer maintenance tank used for collecting excess ink on some Epson

Stylus Pro printers has been removed. In this case the current job is suspended until the printer maintenance tank is replaced.

Maintenance tank remaining nn%

Stylus Pro printers have a maintenance tank for collecting waste ink. On some of these printers, when the tank is 50% full, a warning message is issued. If the tank becomes too full the printer may stop printing altogether.

Poor or erratic image quality

Try to localize the problem. If there are any error or warning messages look at their causes and try the associated cures. If there are no messages, start by printing any test pages available on the printer itself, perhaps from a test or diagnostic menu. If the problem is not present in any of these tests, there is likely to be some problem or inappropriate setting in the page setup.

The ProofReady combo box is disabled.

You have not enabled Harlequin ColorPro in the RIP. You will only be able to use calibrated output on the printer, with no color profiles.

No output

Make sure that you are sending output to a printer that is properly connected, powered up, supplied with ink and media, and ready to receive data. Confirm that the printer itself is working by printing a test page, alignment test, or similar printer-based function.

Output appears clipped

When printing using large paper sizes or high resolutions a VM Error may occur. Some jobs may suppress the VM Error and print using the default page size specified in the Page Layout dialog box, so that the output appears clipped. If this occurs we recommend that you increase the Band size in the Configure RIP options dialog box to 1024 KB.

PhotoInk color management fails to preserve 100% process black

When using a PhotoInk device type, the Preserve 100% process black color setup option may not be honored. To prevent black from being color managed in this instance, you should add a page feature to your page setup, which runs the following PostScript language code:

<</ReuseColorChains false>> setsystemparams

If necessary, refer to the OEM manual for details on creating and using page features.

E.1.2 Print issues

Printer ejects paper before completing a page

This behavior is normal after the RIP has detected an error and displayed a warning message.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

Otherwise, this behavior is rare but may occur when using a Microsoft Windows platform and a parallel port to drive the printer. It may be due to the mode set for the parallel port, the printer cable, or some interaction between these items. Reset the printer before retrying the same page. If the problem persists, check the mode set for the port in the computer BIOS: do not use EPP mode, particularly if you have a RIP security dongle attached to the same port. If the port is also in use for a dongle, move the printer to another parallel port. Finally, try a new bidirectional parallel printer cable.

E.1.3 File naming messages

This section details possible error messages that may appear in the RIP monitor window due to the use of incor-

rect file name templates (see Appendix A, “Output File Naming” ). Suggestions are given to prevent these errors.

All messages are prefixed with the text:

File name generation error

Filename too long for target platform

This message appears when the combined file name stem and extension are too long for the target platform.

For example, the combined length of the file name stem and extension must not exceed 255 characters on a

Windows platform or 31 characters on a Macintosh platform. To prevent this error, use truncated tags, as shown in the example for the

<dos>

tag in “Examples of tag usage”, page 26

File stem too long for target platform

This message appears when the file name stem is too long for the target platform. To prevent this error, restrict the length of the stem by reducing the fixed text, or by using truncated tags. The example for the

<dos>

tag in “Examples of tag usage”, page 26

demonstrates truncation.

Extension too long for target platform

This message appears when the file name extension is too long for the target platform. For example, file names in UNIX are not considered to have a separate file name extension. If using the

<dot>

tag in conjunction with the

<unix>

tag this error would be generated. To prevent this error create a template such as

<unix><jobname>.epf

rather than using the

<dot>

tag.

Full pathname too long for target platform

This message appears when the full path name (combination of the file path and the file name) is too long for the target platform. For example, in Windows operating systems the full path name must not exceed 259 characters. To prevent this error, examine the number of characters in the Browse folders file path (for example,

C:\HQ55\RIP\FILES\

) and create a template in which the combined length of the file path and the file name do not exceed the limit for the platform.

The folder name/path was not supplied

This message appears when the file path is not specified in the Browse Folders text box within the Epson

Configuration dialog box. To prevent this error, provide a valid file path.

Unknown tag found in template

This message appears when an unknown tag is found in the template. This is most likely due to a spelling error.

Template contains an incomplete tag

This message occurs when the opening and closing brackets of a tag are missing, that is < or > is missing.

Template resulted in a null filename

This message occurs when the template only contain characters that are not allowed in file name on the relevant platform.

Tag delimiter mismatch in template

This message appears when a tag delimiter, either

, is missing from a tag. Check that all the tags have both delimiters.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

An extension is required but not found

This message appears when a file extension is expected but is not specified in the template. For example, if using the

<dot>

tag, a file extension must be given.

File requested is not writeable

This message appears when trying to write to a file that already exists and that has read-only access. If you wish to overwrite the file, then you must change the file permissions to provide write access.

Unique name requested but all names are in use

This message appears when no further unique numbers are available. For example, if using the template stem<1unique><dot>epf

, this error would occur once the file names stem1.epf

through stem9.epf

had been generated, because no further unique numbers are available.

E.1.4 Post processing messages

This section details possible messages that may appear during post processing (see

Appendix B, “Post processing”

Running post processing command "command" in folder "folder name"

This is a progress message, confirming the command that is being run.

Post processing command failed - Cannot change directory to "directory path"

This error message appears when there is a problem changing to the specified directory that prevents the completion of the post processing. Check that the directory exists and that you have permission to access the directory.

Post processing command failed - "status value"

This error message appears when the post processing has been unsuccessful. The

status value

is the error code generated by the command or shell you are using and can be used by your system administrator to determine the exact cause of the post processing failure.

E.1.5 Miscellaneous messages

The following is a general list of error messages or warnings that may appear in the RIP monitor window:

%%[ Error: rangecheck; OffendingCommand: get ]%%

This message may appear if you try to use a 1-bit device type without first enabling the HEDS1 screening plugin.

To prevent this error, ensure you enable the HEDS1 plugin, as described in “Enabling the printer plugin”, page 4

, before using a 1-bit device type.

%%[ Error: VMerror; OffendingCommand: pagedevice ]%%

%%[Error: undefinedfilename; Offending Command: run]%%

This error message appears if you have created a device type using a name similar to the name of the device type on which it is based. If you use the same text to name the new device as that used to label the device type, you must match the use of lowercase and uppercase characters in the device type label. To prevent this error, open the Device Manager, select the device and click Edit. In the Device Manager Edit dialog box, change the name of the device to something completely different.

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

%%[Warning:Error running file <file name>]%%

This warning appears if you there is a PostScript error in the named file. In such cases, the job will be processed as if the file does not exist.

%%[Error occurred in profile hook <file name>]%%

This warning appears if there is a PostScript error in the named profile hook file. The job is aborted when such an error occurs.

Wrong data format for device(Depth

, Channels

)

This message can appear if you attempt to output a page buffer generated for a 2-bit device type to a biplane device type, or vice versa. The RIP displays this error and disables output in the Output Controller/Monitor dialog box.

If you wish to output the page buffer, select it from the Active Queue list and click Info to change the

Output device to either a 2-bit or biplane device type, depending on the device that the page buffer was originally created for. Deselect the Disable output check box to enable output.

Alternatively, you can delete the page buffer by selecting it and clicking Remove.

This error also occurs when you attempt to send pre-separated jobs to a separating workflow. In this case, the error message will show that the channel has been mismatched, for example:

Channels 1 vs 4

, or

Channels 1 vs 6

, or

Channels 1 vs 7

, or

Channels 1 vs 8

To resolve this, you should either choose to recombine pre-separated jobs, or reject them. In the latter case, a second page setup can be configured using a monochrome colorspace for use with pre-separated jobs.

%%[ Warning - unable to install screens for PhotoCMYK ]%%

Installed screens for PhotoCMYK.

%% [ Error: ioerror; Offending Command: setscreen ] %%

This message can appear if you try to use HDS (v8) or HEDS screens listed in the Edit Style dialog box before enabling the use of HDS or HDS light. In this case, you must enable HDS or HDS light in the Configure RIP Extras dialog box and then re-submit your job.

%%[ Error: rangecheck; OffendingCommand: setsystemparams ]%%

This will happen is if you attempt to use HEDS screening (for example, by using a VSD printer device) but you have not installed the HEDS plugin. Install the HEDS plugin and then enter its password and retry.

%%[ Error: ioerror; OffendingCommand: pagedevice ]%%

This will happen if you have enabled HDS with a password but have not installed the additional HDS screens, required by 7 and 8 color PhotoInk printers, {{ from extrahds }}.

E.2 Problems with passwords

If you have problems enabling a device or option you should confirm with your supplier the password or password file. They may provide you with a new password or password file. If this is the case, you may need to provide the serial number of your RIP. The RIP displays this number in the RIP monitor window when starting up, in the form:

Serial number: 1234-56

AG50566 REV. 5

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 4800

You must also tell your supplier the platform for which you require the password or password file. The platform is the combination of operating system and processor type. For example, you might specify Windows NT, and

Intel processor (CPU).

Once you have a valid password or password file, follow the relevant steps:

Password file

Password

Copy the password file into the

Passwords

folder, which is a subfolder of the

folder. See the Harlequin RIP OEM Manual for further details.

Use the File > Configure RIP menu option to display the Configure RIP dialog box. Click the Extras button in the Configure RIP dialog box to display the

Extras dialog box. Select the entry for the device or option that you wish to add, and click Add to display the Enable Feature dialog box. Enter the password given to you by your supplier, and click OK.

AG50566 REV. 5

ProofMate (ProofReady) Plugin for Epson Stylus Pro 4800 Printers

Contents

Chapter 1–Getting Started

1.1 Plugin features

1.2 System requirements

1.2.1 Windows

1.2.2 Apple Mac

1.2.3 Memory and disk space requirements

1.2.4 Supported RIPs

1.2.5 Optional items

1.3 Installing plugins

1.4 Enabling the printer plugin

1.4.1 Screening plugin compatibility

1.4.2 Installing screening plugins

1.5 Location of plugin folders

1.6 Allocating additional memory to the RIP

1.7 Related documentation

Chapter 2–Output Devices

2.1 Epson output devices

2.2 Setting device options

Output method

File output

File template

IP address

Port number

Media type

Media size

Output bin

Paper feed adjustment offset

Ink type

Desired quality

Compression

Cut media after each page

Bidirectional printing

Expanded margins

Account name

Use your login name as Account name

Post processing

2.3 Adding new output devices

2.4 Halftone screen selection

Chapter 3–ProofReady Profiles

3.1 Supplied ProofReady profiles

Chapter 4–Creating Page Setups

4.1 Creating a page setup

4.2 Page layout options

4.2.1 Margins and centering options

4.2.2 Page, media and paper size

4.2.3 Transverse paper

Chapter 5–Calibration and Color Management

5.1 Calibrating the printer

5.1.1 Print and measure an initial target

5.1.2 Print and measure a second target

5.1.3 Print and measure a final target

5.2 Recalibrating

5.3 Creating an ICC profile and installing in the RIP

5.3.1 Creating a suitable page setup

5.3.2 Printing and measuring an ICC target

5.3.3 Install the ICC profile in your RIP

5.4 Creating ColorPro profiles

Appendix A–Output File Naming

A.1 Content generating tags

A.2 Checking tags

A.3 Examples of tag usage

Appendix B–Post processing

B.1 Post processing substitution codes

B.2 Checking the command string

Appendix C–Memory Requirements

C.1 Determining processing overhead

C.2 Memory factor tables

Appendix D–Quality modes

D.1 Quality mode table Epson4800

Appendix E–Troubleshooting

E.1 RIP Monitor windows output messages

E.1.1 Printer messages

E.1.2 Print issues

E.1.3 File naming messages

E.1.4 Post processing messages

E.1.5 Miscellaneous messages

E.2 Problems with passwords

Пов''язані