NAVIGATION

NAVIGATION*

Learn how to enter a destination and operate the navigation system.

Basic Navigation Operation

A real-time navigation system uses GPS and a map database to show your current  location and help guide you to a desired destination. You can operate the system using voice commands or the touchscreen.

To reduce the potential for driver distraction, certain manual functions may be inoperable or grayed out while the vehicle is moving. Voice commands are always available.

Steering Wheel Controls

Use the steering wheel controls to control the system.

BACK button: Press to cancel a command or operation.

TALK button: Press to give navigation commands.

Talk Button Tips

•  When using the Talk button, wait for a beep before saying a command.

•  To bypass the system prompts, simply press the Talk button again to say your command.

•  Speak in a clear, natural voice.

•  Reduce all background noise.

•  Close the windows and moonroof.

System Guidance Volume

Adjust the navigation system volume.

1. From the HoMe screen, select Settings.

2. Select System.

3. Select the Sound/Beep tab.

4. Select Guidance volume, and adjust the level.

Select oK when complete.

5. Press BACK to exit the menus.

*if equipped

NAVIGATION

Navigation Display and Controls

Touch icons on the screen to enter information and make selections.

Street name

Traffic incident icon

Current vehicle position

Search icon

Traffic flow

Map menu

MAP: Display the map screen.

Navigation: Display the navigation screen.

MENU: Display navigation options.

BACK:  Go back to  the previous display.

WARNING

Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

operate system controls only when the conditions permit you to safely do so.

NAVIGATION

Entering a Destination

Use several methods to enter a destination.

Home Address

Store your home address in the system so you can easily route to it.

1. From the map screen, select the Search icon.

2. Select MeNU.

3. Select Set Home Location.

4. Select enter My Address.

5. Select Search All.

6. Enter the street number and select Done.

7. enter the street name and select Done. Select the street from the list.

8. Select the address from the list. A map of the address is shown. Select Select.

When your home address is stored, you can press the Talk button and say 

“Navigation” and then “Go home” at any time. You can also select Go Home from the Where To? menu.

Street Address enter a street address.

1. From the map screen, select the Search icon.

2. Select Address.

3. Select Search All.

4. Enter the street number and select Done.

5. enter the street name and select Done. Select the street from the list.

6. Select the address from the list.

7. Select Go!.

You can also enter a street address using voice commands. Press the Talk button and say 

“Navigation” and then “Find Address.” Follow the prompts.

NAVIGATION

Place Category enter a destination using a point of interest or landmark.

1. From the map screen, press MeNU.

2. Select Where To?.

3. Select Categories.

4. Select a category (and a subcategory if necessary).

5. Select a place from the list.

6. Select Go!.

You can also enter a street address using voice commands. Press the Talk button and say 

“Navigation” and then “Find Place.” Follow the prompts.

Recent Places

Select an address from a list of your 50 most recent destinations.

1. From the map screen, press MeNU.

2. Select Where To?.

3. Select recent.

4. Select a place from the list.

5. Select Go!.

NAVIGATION

Saved Places

Save locations so you can quickly route to them.

Saving a location

1. From the map screen, press MeNU.

2. Select Where To?.

3. Select enter Search.

4. enter the address or place name.

5. Select the destination name when it appears on the map screen.

6. Select the menu icon.

7. Select Save.

8. Select oK.

You can also save your current location. From the map screen, select the vehicle icon. Select Save. enter a name for the location. Select Done. Select oK.

Routing to a saved location

1. From the map screen, press MeNU.

2. Select Where To?.

3. Select Saved.

4. Select the destination from the list.

5. Select Go!.

NAVIGATION

Routing

After a destination is set, you can alter or cancel your route.

Map Legend

During route guidance

Next guidance point

Speed limit

Search icon

Cancel route

Turn-by-turn directions

Shows a more detailed view of the next maneuver on the upper display.

Lane guidance

Distance to next guidance point

Current route

NAVIGATION

Traffic view traffic flow and incidents in major metro areas. You can also select traffic to avoid. Traffic coverage is limited in Canada.

Viewing traffic

1. From the map screen, select the traffic icon.

2. Select Traffic Conditions.

3. Traffic icons are shown on the map. Select the magnifying glass icon to display a full list of traffic delays.

Avoiding traffic on your route

1. From the map screen, select the traffic icon.

2. Select Traffic on route.

3. Select an incident to avoid from the list.

4. Select the menu icon.

5. Select Avoid.