Lexus IS 200t, IS 300, IS 350 vehicle User manual
Below you will find brief information for vehicle IS 200t, vehicle IS 300, vehicle IS 350. This document will guide you through the settings and customization options available for your vehicle, empowering you to personalize your driving experience. You can configure everything from door lock settings to climate control and lighting. Learn how to tailor these features to suit your specific preferences.
advertisement
Lexus Personalized Settings
Your vehicle includes a variety of electronic features that can be programmed to your preferences. Programming of these features is performed once at no charge by your
Lexus Dealer provided you obtain the service at the 6-month/5,000-mile scheduled maintenance service.
It is also possible to customize certain vehicle features yourself using the navigation system.
Vehicles with Display Audio system:
IS 200t/300/350
MENU Menu
Climate Nav LEXUS App Suite Info
Display
Setup
CONTROLLER
STEP 1 Press the MENU button.
Radio Media Phone Setup
STEP 2
Setup
Scroll to by turning the
Controller. Push to select.
Navigation Vehicle Phone LEXUS
App Suite
Data Services
Settings
Page2
STEP 3 Scroll to and push
Controller to select.
Vehicle Settings
Maintenance
Vehicle Customization
LEXUS Park Assist
Vehicle must be in “ ON” mode to program personalized settings.
Please refer to the 2016 IS 200t/300/350
Quick Guide or Owner’s Manual for more information on Display Audio operations.
STEP 4 Push Controller to select .
STEP 5 Select category and scroll to specific customization setting.
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□ The doors automatically lock when the vehicle is taken out of park and placed into another
range (Standard) = By shift from P
□ The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□ The doors automatically unlock when the vehicle is placed into park (Standard) =
By shift to P
□ All the doors automatically unlock when the driver door is opened = By driver door
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□ Pressing the unlock button one time will unlock all doors = Off
□ Pressing the unlock button one time unlocks the driver door, and two times unlocks all doors (Standard) = On
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□ Gripping the driver door handle will unlock the driver door (Standard) = Driver’s door
LPS options were correct at time of development. All options are subject to change without prior notice.
Settings that can be customized by:
Using the navigation system
Dealer
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
5. Auto Relock Timer
When the doors are unlocked and not opened:
□ They will automatically re-lock in 120 seconds.
□ They will automatically re-lock in 60 seconds. (Standard)
□ They will automatically re-lock in 30 seconds.
□ OFF. Doors will NOT automatically re-lock.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□ Press the lock/unlock button and the emergency flashers will not flash = Off
□ Press the lock/unlock button and the emergency flashers will flash (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□ The seat heater intensity differs depending on the temperature inside the cabin, when seat heater is operating = Timer
□ The seat heater intensity will not automatically adjust to temperature (Standard) = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□ It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□ It will automatically achieve a set temperature, warm or cool, without engaging the air conditioner compressor * = Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF Timer
When the headlights are in the AUTO position after the ignition is switched off and all doors are closed:
□ The headlights will turn off in 90 seconds.
□ The headlights will turn off in 60 seconds.
□ The headlights will turn off in 30 seconds. (Standard)
□ The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□ OFF
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
□ 0 seconds
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park and the ignition is turned off, the driver seat can be set to the following:
□ Remain in the current position, as set by the driver = Off
□ Automatically move partially away from the steering wheel partially = Partial
□ Automatically move fully away from the steering wheel fully = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be programmed as follows:
□ The driver seat will move to memory position when the driver door is unlocked. (Standard)
□ The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□ Turning the key one time will unlock all doors = Off
□ Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□ The buzzer will not sound = Off
19. Access System with Elec. Key
When unlocking the doors:
□ Deactivates Smart Access. Access using electronic key unlock button = Off
Programmable by Dealer Only (cont’d)
20. Panic Mode
When pressing the panic button on the electronic key:
□ The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key left and holding the position for 2 seconds will not open the windows and moonroof. (Standard)
□ Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key right and holding the position for 2 seconds will not close the windows and moonroof. (Standard)
□ Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23. Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
24. Open Windows and Moonroof with Electronic Key*
When pressing the unlock button on the electronic key for 3 seconds:
□ The windows and moonroof will not open (Standard) = Off
□ All the windows and moonroof will open = On
25. Slide/Tilt Moonroof with Electronic Key*
When option #24 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□ On (Standard) = On
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
28. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
□ The cabin light will not illuminate = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be programmed for the following:
□ The outer foot lights will illuminate. (Standard)
30. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for the following:
□ The foot lights will illuminate. (Standard)
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The driver seat belt buzzer will sound. (Standard)
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The passenger seat belt buzzer will sound. (Standard)
□ The passenger seat belt buzzer will not sound.
33. Opening the Trunk
Pressing the trunk release button on the electronic key will open the trunk. The release button can be programmed as follows:
□ Press button one time to release the trunk. (No delay)
□ Press button two times to release the trunk.
□ Press and hold button for 0.8 seconds to release the trunk. (Standard)
□ Press and hold button for 2 seconds to release the trunk.
□ The button can be turned off so the trunk cannot be opened using the electronic key.
34. Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□ Medium (Standard)
□ Soft
□ Loud
Programmable by Dealer Only (cont’d)
20. Panic Mode
When pressing the panic button on the electronic key:
□ The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key left and holding the position for 2 seconds will not open the windows and moonroof. (Standard)
□ Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key right and holding the position for 2 seconds will not close the windows and moonroof. (Standard)
□ Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23. Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
24. Open Windows and Moonroof with Electronic Key*
When pressing the unlock button on the electronic key for 3 seconds:
□ The windows and moonroof will not open (Standard) = Off
□ All the windows and moonroof will open = On
25. Slide/Tilt Moonroof with Electronic Key*
When option #24 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□ On (Standard) = On
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
28. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
□ The cabin light will not illuminate = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be programmed for the following:
□ The outer foot lights will illuminate. (Standard)
30. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for the following:
□ The foot lights will illuminate. (Standard)
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The driver seat belt buzzer will sound. (Standard)
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The passenger seat belt buzzer will sound. (Standard)
□ The passenger seat belt buzzer will not sound.
33. Opening the Trunk
Pressing the trunk release button on the electronic key will open the trunk. The release button can be programmed as follows:
□ Press button one time to release the trunk. (No delay)
□ Press button two times to release the trunk.
□ Press and hold button for 0.8 seconds to release the trunk. (Standard)
□ Press and hold button for 2 seconds to release the trunk.
□ The button can be turned off so the trunk cannot be opened using the electronic key.
34. Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□ Medium (Standard)
□ Soft
□ Loud
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□ The doors automatically lock when the vehicle is taken out of park and placed into another
range (Standard) = By shift from P
□ The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□ The doors automatically unlock when the vehicle is placed into park (Standard) =
By shift to P
□ All the doors automatically unlock when the driver door is opened = By driver door
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□ Pressing the unlock button one time will unlock all doors = Off
□ Pressing the unlock button one time unlocks the driver door, and two times unlocks all doors (Standard) = On
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□ Gripping the driver door handle will unlock the driver door (Standard) = Driver’s door
Door Lock Settings (cont’d)
5. Auto Relock Timer
When the doors are unlocked and not opened:
□ They will automatically re-lock in 120 seconds.
□ They will automatically re-lock in 60 seconds. (Standard)
□ They will automatically re-lock in 30 seconds.
□ OFF. Doors will NOT automatically re-lock.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□ Press the lock/unlock button and the emergency flashers will not flash = Off
□ Press the lock/unlock button and the emergency flashers will flash (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be programmed as follows:
Settings that can be customized by:
Using the navigation system
Dealer
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings off volume 1 volume 2 volume 3 volume 4 volume 5
(standard) volume 6 volume 7
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□ The seat heater intensity differs depending on the temperature inside the cabin, when seat heater is operating = Timer
□ The seat heater intensity will not automatically adjust to temperature (Standard) = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□ It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□ It will automatically achieve a set temperature, warm or cool, without engaging the air conditioner compressor * = Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings very dark dark normal
(standard) light very light
11. Headlamps Auto-OFF Timer
When the headlights are in the AUTO position after the ignition is switched off and all doors are closed:
□ The headlights will turn off in 90 seconds.
□ The headlights will turn off in 60 seconds.
□ The headlights will turn off in 30 seconds. (Standard)
□ The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened.
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
2
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□ OFF
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
□ 0 seconds
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park and the ignition is turned off, the driver seat can be set to the following:
□ Remain in the current position, as set by the driver = Off
□ Automatically move partially away from the steering wheel partially = Partial
□ Automatically move fully away from the steering wheel fully = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be programmed as follows:
□ The driver seat will move to memory position when the driver door is unlocked. (Standard)
□ The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□ Turning the key one time will unlock all doors = Off
□ Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□ The buzzer will not sound = Off
19. Access System with Elec. Key
When unlocking the doors:
□ Deactivates Smart Access. Access using electronic key unlock button = Off
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□ The doors automatically lock when the vehicle is taken out of park and placed into another
range (Standard) = By shift from P
□ The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□ The doors automatically unlock when the vehicle is placed into park (Standard) =
By shift to P
□ All the doors automatically unlock when the driver door is opened = By driver door
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□ Pressing the unlock button one time will unlock all doors = Off
□ Pressing the unlock button one time unlocks the driver door, and two times unlocks all doors (Standard) = On
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□ Gripping the driver door handle will unlock the driver door (Standard) = Driver’s door
5. Auto Relock Timer
When the doors are unlocked and not opened:
□ They will automatically re-lock in 120 seconds.
□ They will automatically re-lock in 60 seconds. (Standard)
□ They will automatically re-lock in 30 seconds.
□ OFF. Doors will NOT automatically re-lock.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□ Press the lock/unlock button and the emergency flashers will not flash = Off
□ Press the lock/unlock button and the emergency flashers will flash (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□ The seat heater intensity differs depending on the temperature inside the cabin, when seat heater is operating = Timer
□ The seat heater intensity will not automatically adjust to temperature (Standard) = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□ It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□ It will automatically achieve a set temperature, warm or cool, without engaging the air conditioner compressor * = Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF Timer
When the headlights are in the AUTO position after the ignition is switched off and all doors are closed:
□ The headlights will turn off in 90 seconds.
□ The headlights will turn off in 60 seconds.
□ The headlights will turn off in 30 seconds. (Standard)
□ The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□ OFF
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
□ 0 seconds
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park and the ignition is turned off, the driver seat can be set to the following:
□ Remain in the current position, as set by the driver = Off
□ Automatically move partially away from the steering wheel partially = Partial
□ Automatically move fully away from the steering wheel fully = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be programmed as follows:
□ The driver seat will move to memory position when the driver door is unlocked. (Standard)
□ The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□ Turning the key one time will unlock all doors = Off
□ Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□ The buzzer will not sound = Off
19. Access System with Elec. Key
When unlocking the doors:
□ Deactivates Smart Access. Access using electronic key unlock button = Off
Settings that can be customized by:
Using the navigation system
Dealer
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Vehicle Customization
Door Lock Settings
Climate Settings
Light Settings
Other Vehicle Settings
Dealer only
Dealer only
Dealer only
Dealer only
3
Programmable by Dealer Only (cont’d)
20. Panic Mode
When pressing the panic button on the electronic key:
□ The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key left and holding the position for 2 seconds will not open the windows and moonroof. (Standard)
□ Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key right and holding the position for 2 seconds will not close the windows and moonroof. (Standard)
□ Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23. Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
24. Open Windows and Moonroof with Electronic Key*
When pressing the unlock button on the electronic key for 3 seconds:
□ The windows and moonroof will not open (Standard) = Off
□ All the windows and moonroof will open = On
25. Slide/Tilt Moonroof with Electronic Key*
When option #24 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□ On (Standard) = On
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
28. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
□ The cabin light will not illuminate = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be programmed for the following:
□ The outer foot lights will illuminate. (Standard)
30. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for the following:
□ The foot lights will illuminate. (Standard)
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The driver seat belt buzzer will sound. (Standard)
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The passenger seat belt buzzer will sound. (Standard)
□ The passenger seat belt buzzer will not sound.
33. Opening the Trunk
Pressing the trunk release button on the electronic key will open the trunk. The release button can be programmed as follows:
□ Press button one time to release the trunk. (No delay)
□ Press button two times to release the trunk.
□ Press and hold button for 0.8 seconds to release the trunk. (Standard)
□ Press and hold button for 2 seconds to release the trunk.
□ The button can be turned off so the trunk cannot be opened using the electronic key.
34. Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□ Medium (Standard)
□ Soft
□ Loud
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□ The doors automatically lock when the vehicle is taken out of park and placed into another
range (Standard) = By shift from P
□ The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□ The doors automatically unlock when the vehicle is placed into park (Standard) =
By shift to P
□ All the doors automatically unlock when the driver door is opened = By driver door
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□ Pressing the unlock button one time will unlock all doors = Off
□ Pressing the unlock button one time unlocks the driver door, and two times unlocks all doors (Standard) = On
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□ Gripping the driver door handle will unlock the driver door (Standard) = Driver’s door
5. Auto Relock Timer
When the doors are unlocked and not opened:
□ They will automatically re-lock in 120 seconds.
□ They will automatically re-lock in 60 seconds. (Standard)
□ They will automatically re-lock in 30 seconds.
□ OFF. Doors will NOT automatically re-lock.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□ Press the lock/unlock button and the emergency flashers will not flash = Off
□ Press the lock/unlock button and the emergency flashers will flash (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□ The seat heater intensity differs depending on the temperature inside the cabin, when seat heater is operating = Timer
□ The seat heater intensity will not automatically adjust to temperature (Standard) = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□ It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□ It will automatically achieve a set temperature, warm or cool, without engaging the air conditioner compressor * = Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF Timer
When the headlights are in the AUTO position after the ignition is switched off and all doors are closed:
□ The headlights will turn off in 90 seconds.
□ The headlights will turn off in 60 seconds.
□ The headlights will turn off in 30 seconds. (Standard)
□ The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□ OFF
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
□ 0 seconds
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park and the ignition is turned off, the driver seat can be set to the following:
□ Remain in the current position, as set by the driver = Off
□ Automatically move partially away from the steering wheel partially = Partial
□ Automatically move fully away from the steering wheel fully = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be programmed as follows:
□ The driver seat will move to memory position when the driver door is unlocked. (Standard)
□ The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□ Turning the key one time will unlock all doors = Off
□ Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□ The buzzer will not sound = Off
19. Access System with Elec. Key
When unlocking the doors:
□ Deactivates Smart Access. Access using electronic key unlock button = Off
Programmable by Dealer Only (cont’d)
20. Panic Mode
When pressing the panic button on the electronic key:
□ The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key left and holding the position for 2 seconds will not open the windows and moonroof. (Standard)
□ Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key right and holding the position for 2 seconds will not close the windows and moonroof. (Standard)
□ Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23. Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
Settings that can be customized by:
Using the navigation system
Dealer
Dealer only
Dealer only
Dealer only
Dealer only
24. Open Windows and Moonroof with Electronic Key*
When pressing the unlock button on the electronic key for 3 seconds:
□ The windows and moonroof will not open (Standard) = Off
□ All the windows and moonroof will open = On
25. Slide/Tilt Moonroof with Electronic Key*
When option #24 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□ On (Standard) = On
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
28. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
□ The cabin light will not illuminate = Off
Dealer only
Dealer only
Dealer only
Dealer only
Dealer only
4
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be programmed for the following:
□ The outer foot lights will illuminate. (Standard)
30. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for the following:
□ The foot lights will illuminate. (Standard)
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The driver seat belt buzzer will sound. (Standard)
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The passenger seat belt buzzer will sound. (Standard)
□ The passenger seat belt buzzer will not sound.
33. Opening the Trunk
Pressing the trunk release button on the electronic key will open the trunk. The release button can be programmed as follows:
□ Press button one time to release the trunk. (No delay)
□ Press button two times to release the trunk.
□ Press and hold button for 0.8 seconds to release the trunk. (Standard)
□ Press and hold button for 2 seconds to release the trunk.
□ The button can be turned off so the trunk cannot be opened using the electronic key.
34. Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□ Medium (Standard)
□ Soft
□ Loud
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□ The doors automatically lock when the vehicle is taken out of park and placed into another
range (Standard) = By shift from P
□ The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□ The doors automatically unlock when the vehicle is placed into park (Standard) =
By shift to P
□ All the doors automatically unlock when the driver door is opened = By driver door
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□ Pressing the unlock button one time will unlock all doors = Off
□ Pressing the unlock button one time unlocks the driver door, and two times unlocks all doors (Standard) = On
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□ Gripping the driver door handle will unlock the driver door (Standard) = Driver’s door
5. Auto Relock Timer
When the doors are unlocked and not opened:
□ They will automatically re-lock in 120 seconds.
□ They will automatically re-lock in 60 seconds. (Standard)
□ They will automatically re-lock in 30 seconds.
□ OFF. Doors will NOT automatically re-lock.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□ Press the lock/unlock button and the emergency flashers will not flash = Off
□ Press the lock/unlock button and the emergency flashers will flash (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□ The seat heater intensity differs depending on the temperature inside the cabin, when seat heater is operating = Timer
□ The seat heater intensity will not automatically adjust to temperature (Standard) = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□ It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□ It will automatically achieve a set temperature, warm or cool, without engaging the air conditioner compressor * = Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF Timer
When the headlights are in the AUTO position after the ignition is switched off and all doors are closed:
□ The headlights will turn off in 90 seconds.
□ The headlights will turn off in 60 seconds.
□ The headlights will turn off in 30 seconds. (Standard)
□ The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□ OFF
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□ 30 seconds
□ 15 seconds (Standard)
□ 7.5 seconds
□ 0 seconds
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park and the ignition is turned off, the driver seat can be set to the following:
□ Remain in the current position, as set by the driver = Off
□ Automatically move partially away from the steering wheel partially = Partial
□ Automatically move fully away from the steering wheel fully = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be programmed as follows:
□ The driver seat will move to memory position when the driver door is unlocked. (Standard)
□ The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□ Turning the key one time will unlock all doors = Off
□ Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□ The buzzer will not sound = Off
19. Access System with Elec. Key
When unlocking the doors:
□ Deactivates Smart Access. Access using electronic key unlock button = Off
Programmable by Dealer Only (cont’d)
20. Panic Mode
When pressing the panic button on the electronic key:
□ The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key left and holding the position for 2 seconds will not open the windows and moonroof. (Standard)
□ Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□ Turning the key right and holding the position for 2 seconds will not close the windows and moonroof. (Standard)
□ Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23. Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
24. Open Windows and Moonroof with Electronic Key*
When pressing the unlock button on the electronic key for 3 seconds:
□ The windows and moonroof will not open (Standard) = Off
□ All the windows and moonroof will open = On
25. Slide/Tilt Moonroof with Electronic Key*
When option #24 is on, the moonroof can be programmed for the following:
□ Slide (Standard)
□ Tilt
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□ On (Standard) = On
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
28. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be programmed for the following:
□ The cabin light will illuminate (Standard) = On
□ The cabin light will not illuminate = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be programmed for the following:
□ The outer foot lights will illuminate. (Standard)
30. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for the following:
□ The foot lights will illuminate. (Standard)
Settings that can be customized by:
Using the navigation system
Dealer
Dealer only
Dealer only
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The driver seat belt buzzer will sound. (Standard)
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□ The passenger seat belt buzzer will sound. (Standard)
□ The passenger seat belt buzzer will not sound.
33. Opening the Trunk
Pressing the trunk release button on the electronic key will open the trunk. The release button can be programmed as follows:
□ Press button one time to release the trunk. (No delay)
□ Press button two times to release the trunk.
□ Press and hold button for 0.8 seconds to release the trunk. (Standard)
□ Press and hold button for 2 seconds to release the trunk.
□ The button can be turned off so the trunk cannot be opened using the electronic key.
34. Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□ Medium (Standard)
□ Soft
□ Loud
Dealer only
Dealer only
Dealer only
Dealer only
Date
Repair Order Number ( Dealer only)
Customer Signature
Vehicle Identification Number ( Dealer only)
5
advertisement
Key Features
- Door Lock Settings
- Climate Settings
- Light Settings
- Other Vehicle Settings
- Personalized Settings
Frequently Answers and Questions
How do I program the automatic door locks?
Can I adjust the interior light timer?
How do I access the vehicle's personalized settings?
Related manuals
advertisement