Headphones with Headset Functionality
NS63
Active Noise Canceling
Headphones with Headset Functionality
Congratulations, and thank you for choosing the
MEElectronics NoiseSHIELD NS63
Active Noise Canceling Headphones
Please read this manual in its entirety and
visit meelec.com/manual for additional
information and troubleshooting
If you have any questions or issues
after reading the manual, please contact
MEElectronics customer service at
[email protected]
or (626) 965-1008
Package Contents
Warning
NoiseSHIELD NC63 Features
Putting Batteries in the NC63
Listening to Music/Audio
Noise Canceling Only Use
When Not in Use
Headset Use
Headset Use: Controlling Volume
Headset Use: Taking Phone Calls
Microphone and Remote Use
Warranty
Troubleshooting
Specifications
1
2
3
4
5
6
7
8
10
11
12
13
15
NS63
MUTE
Active Noise
Canceling
Headphones
Protective
Case
Headset
Cable
Audio
Cable
User
Manual
Note: An online version of this manual is available on meelec.com
Warning
Noise canceling headphones attenuate external low-pitched sounds.
Be aware that when the active noise canceling feature is on auditory
queues will sound different.
Do not use headphones at high volumes for extended periods of time
as doing so will result in permanent hearing damage. It is advised you
keep volume levels moderate to low at all times for your safety. Do
not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Please visit www.osha.gov for more info.
It is advised to turn the volume on your music player all the way
down before connecting your headphones. After the headphones are
connected, gradually increase the volume until a comfortable listening
level is achieved.
• Do not store the headphones in direct sunlight,
near heating devices or in hot, humid or dusty places.
• Do not subject the headphones to strong impact.
• Do not allow the headphones to become wet.
NoiseSHIELD NS63 Features
The NoiseSHIELD NS63 is a feature-rich high quality active noise
canceling (ANC) headphone.
• No batteries are necessary for the NoiseSHIELD NS63 to
work, however two AAA batteries are required for the ANC
function to work.
• Equipped with a jack on the left ear cup for a detachable
cable, the NoiseSHIELD NS63 works with any cable that has
a standard 3.5mm plug. Both a standard audio cable and
headset cable are included.
• The Mute button on the left ear cup will mute the audio signal.
When on, ANC will remain active but audio will be muted while
the mute button is pressed.
• The ANC feature can be activated for noise reduction without
the audio cable plugged in for ANC-only functionality.
• The NoiseSHIELD NS63 has a battery life of up to 32 hours
from a pair of AAA batteries for ANC functionality.
• NoiseSHIELD technology blocks out unwanted external noise
without changing the sound of your music!
Putting Batteries in the NS63
THE NOISE CANCELING FUNCTION REQUIRES 2 AAA BATTERIES.
BATTERIES NOT INCLUDED.
1.
Remove
the battery
compartment
lid on the
right ear cup
by sliding it in
the direction
of the arrow
+
OPEN
+
OPEN
+
+
BATTERY
BATTERY
+
BATTERY
2.
Insert AAA
batteries in
the correct
orientation
as shown.
3.
Replace the
battery
compartment
lid and slide it
the opposite
direction of the
arrow until it
clicks in place
BATTERY
right ear cup
+
OPEN
www.meelec.com
04
Listening to Music/Audio
MUTE
power
switch
headphone
jack
power
indicator
left ear cup
audio device
audio
cable
headset
cable
1. Connect either the audio cable or headset cable to the jack on the
left ear cup, making certain the plug is firmly seated.
If using the headset cable, orient it so that the microphone is closest
to the headphones.
2. Connect the other end of the cable to the headphone jack of your
audio device.
3. To activate the noise canceling function, move the power switch on
the left ear cup to the “ON” position; power indicator should light up
green. (If you do not wish to use active noise canceling , move
power switch to the “OFF” position.)
05
brings musical enjoyment to everyone
Noise Canceling Only Use
A.
B.
C.
D.
E.
F.
mute button
ON position
power switch
headphone jack
OFF position
power indicator
A
MUTE
B
C
E
F
D
left ear cup
1. To activate noise canceling function, move the power switch on
your headphones to the “ON” position; power indicator should
light up green.
There is no need to connect a cable to use the noise canceling
function only; simply turn the headphones on and wear them.
www.meelec.com
06
When Not In Use
• When not using your headphones, move the power switch to the
“OFF” position.
• Remove battery if you will not be using the noise-cancelling
functionality of the headphones for an extended period of time
(greater than one week).
• Store the headphones in the included protective carrying case.
• To clean the headphones, wipe with a clean, soft cloth. Do not use
harsh chemical cleaners on the headphones.
MUTE
07
brings musical enjoyment to everyone
Headset Use
The included headset cable features an inline microphone, remote,
and universal volume control. The headset cable is compatible with
most smartphones and tablets.
For full compatibility and functionality, including controlling media playback,
please visit meelec.com/phone.
universal volume control
+
remote button
maximum volume setting
microphone
Maximum volume is located when the switch
is closest to the + on the remote.
Microphone
Remote
button
Universal
volume
control
The opening for the microphone is located as shown.
For best results ensure microphone/remote unit is close
to your mouth with the opening facing you
Please see page for information on using the remote
button
The + symbol indicates the maximum volume position.
If you don’t hear sound, please check the volume control
slider.
Headset Use (Cont.)
Use the headset cable with smartphones.
MUTE
power
switch
headphone
jack
power
indicator
left ear cup
audio device
headset
cable
Plug the 3-pin plug into
the NoiseSHIELD NS63’s
headphone jack
09
Plug the 4-pin plug
into compatible
phone or tablet
brings musical enjoyment to everyone
Headset Use: Volume Control
Important:
Volume is controlled on the inline mic/remote unit.
If you don’t hear any sound, or the volume is low, adjust the volume
slider toward the + symbol on the remote.
Headset Use: Taking Phone Calls
Functionality for iPhone® and most Android™ phones:
Phone Mode
Button Press
Incoming phone call
Phone call in progress
Single press
Single press
Action
Answer phone call
End call
Note: If you experience issues please make sure no other applications are interfering
with remote functionality
MUTE
www.meelec.com
10
Microphone and Remote Use:
Controlling Media
Note: iPhone and Android devices support multi-tasking, allowing one
program to have priority over others, which can affect remote button
functionality. If your remote button is not working, try bringing the program
you want the remote to work with into focus (active window).
Apple device functionality (iPhone, iPad®, iPod touch®):
Phone Mode
No incoming
call/active call
Button Press
Action
Single press
Play/pause music
press
Start track over or previous track
Quick double
Quick triple press
Next track
Activate voice control (iPod Touch 3G, 4G,
iPhone 3GS, 4); Activate Siri (iPod Touch
5G and newer, iPhone 4S and newer)
Android device functionality:
Phone Mode
No incoming
call/active call
Button Press
Action
Single press
Play/Pause
Quick triple press
Varies with the application
Quick double press
Next track
Note: Different applications will behave differently, and this is not a
guarantee of functionality
11
brings musical enjoyment to everyone
Warranty
The NoiseSHIELD NS63 is covered by a 1 year manufacturer warranty
against manufacturing defects. Cleaning your NS63 when necessary will
extend the life of your headphone.
For issues with your product, contact customerser[email protected]
Contact [email protected] for warranty claims from:
• Within the US or Canada from an authorized reseller
(see www.meelec.com/wheretobuy)
• From www.meelec.com
• From the MEElectronics store at Amazon.co.uk
For international retailers or distributors and unauthorized resellers
(see authorized resellers at www.meelec.com/wheretobuy)
contact your retailer for warranty service.
Troubleshooting
Problem
Ambient
noise is not
reduced
Solution
Make sure the noise canceling function switch is in the
ON position and the green light is lit; if the light is not lit,
change the batteries
Adjust the headphones to completely cover your ears
Turn the power switch off and then on again to ensure
synchronization of the noise canceling signal
All outside
sounds
are not
eliminated
The NS63 reduces external noise by up to -18dB and no
ANC headset on the market can completely eliminate
outside noises; Constant, low-frequency noises are
reduced the most.
No sound
Check that the audio or headset cable is plugged into the
NS63 completely and the other end is plugged
completely into an audio source, audio is playing, and the
volume is loud enough to hear
If you are using the headset cable with a computer,
laptop, media player, or airplane headphone jack, the
4-pin headset plug may not be compatible; use the
stereo audio cable instead
If you are using the headset cable, make sure the volume
control is not at the minimum position; adjust both the
volume on the device and headset cable to a comfortable
level
Make sure the mute button is not being pressed
Troubleshooting Continued
Problem
During
phone calls
the person
on the other
end can’t
hear me
Solution
Check to make sure you are using the headset cable,
make sure the microphone/remote unit is closest to the
headphones the microphone is close to your mouth
Check the compatibility of your phone at
meelec.com/phone
Try unplugging the headset cable and plugging it back in
to your phone
If you are using a computer, you may need an adapter
(Skype adapter on meelec.com) to separate the
microphone and audio signals
The remote
button
doesn’t work
Check to make sure you are using the headset cable and
make sure the microphone/remote unit is closest to the
headphones
Check the compatibility of your device at
meelec.com/phone; if the sound improves when you
press the remote button, the device is not compatible
Multitasking devices can prevent button presses from
being recognized; make sure the application you want to
work with the remote is the active window
Specifications
Driver:
40 mm cobalt magnet dynamic driver
Impedance:
32 ohms + 15% @ 1K 1mW
Frequency response:
Sensitivity:
Active noice reduction:
Power requirements
Battery life
20 Hz to 20 KHz
108 dB
12 dB at 300 Hz
2 x 1.5V AAA battery
Up to 32 hours with ANC active
MEElectronics and its logo are registered trademarks of S2E, Inc.
All rights reserved.
iPod®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Android™ is a trademark of Google Inc.
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement