Pyle PHBT3E headphone User manual

Pyle PHBT3E is a Bluetooth Stereo Headset that offers a range of features for a seamless wireless audio experience. With Bluetooth 2.1+EDR connectivity, it ensures a stable connection within a 32-foot range. The device supports multiple Bluetooth profiles, including A2DP1.2, AVRCP1.0, HSP1.0, and HFP1.5, allowing for music playback, call handling, and remote control capabilities. It boasts a frequency response of 110Hz – 20kHz and a loudspeaker output of 15mW, delivering clear and dynamic audio.

PDF Download

Document

Table of contents
Flexible Durable Sports Bluetooth
Stereo Headset
PHBT3E
PHBT3E USER MANUAL
1 Introduction
2 Kit Contents
3 Connection Diagram
4 How to use
4.1 General function
4.2 Pairing to mobile phone
4.3 Charging your dev ice
5 Technical specification
6 Service and Support
7 FAQ
1
1
2
2
2
3
5
5
6
6
1. Introduction
Congratulations, and thank you for choosing the PHBT3E
Bluetooth Stereo Headphone. This manual will help you
operate the Bluetooth Stereo Headphone, but you should
first familiarize yourself with the Bluetooth functionality
of your mobile phone or other devices before using the
Bluetooth Stereo Headphone
Safety Rules
1\ Please follow the directions depicted in this manual
closely to ensure your safety. Before using this Bluetooth
Stereo Headphone, we would strongly encourage you
to read through this user manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
3\ Do not modify, repair or dismantle this Bluetooth
Stereo Headphone. Doing so may result in fires, electric
shocks, complete breakdown of this Bluetooth Stereo
Headphone, etc. All of which, are not covered under
warranty.
4\ Do not use any solvents or volatile liquid to clean the
Bluetooth Stereo Headphone.
5\ Do not use the Bluetooth Stereo Headphone in a
hazardous location.
2.Pakage Content :
1x Bluetooth Headset S2
1x USB Charger Cable
1x User Manual
www.pyleaudio.com
1
1
PYLE USER MANUAL
PHBT3E USER MANUAL
3.Connection Diagram
Desired Result
ķTurn on/
Enter the pairing mode/
Turn off /
Play/
Pause/
Answer call/
End call/
ĺ Charge port
Reject call/
Ĺ MIC
Last number redial
ĸ Volume up/
Volume down/
Previous/
Next
4.How to use
4.1. General Functions
Desired Result
Answer call
Short click the Ś button while the
incoming call.
Reject call
Volume up/
Previous
RequiredAction
Turn on
Press the ķbutton for 2 seconds when
the device is off. (Red LED light and a tone
voice beep)
Turn off
Press the ① button for 3 seconds when
the device is on.(a tone voice beep and all
LED is off)
Enter the
pairing mode
Press the ① button in power off mode
and hold on for 5 seconds.(Blue LED and
Red LED quickly flash alternately with two
beep tone voice).
Pairing
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth Master
Device and to perform pairing action(detail
refer to the chapter about pairing).
Low battery warning
The red LED flash.
Last number redial
Double click Ś button on connected state.
2
Charging
End call
Volume down/
Next
RequiredAction
Plug the charger to port of the device
(Red LED is on).
Transfer call
voice
Play/pause
Volume up
Short click the Ś button while ongoing call.
Press the ① button for 1~2 seconds to
reject call when the call is ringing
Double Press the ① button to transfer
the call voice between the mobile phone
and device while ongoing call.
Short click the ① button to play music
when the device is connected/ short click the
① button to to pause when the device
is playing.
Volume Down
Clockwise dial ②Eutton Don't loosen for volume up.
Counterclockwise dial ② button and don't loosen
for volume down.
Previous
Clockwise short dial ② button for Previous music
Next
Counterclockwise short dial ② button for next music.
Factory reset
At same time Long press Ś and Counterclockwise
dial ② don't loosen for 5 second at pairing mode
to clear the paired device list
PHBT3E USER MANUAL
Turn on the Bluetooth Stereo Headphonego to the paring
mode.
Search your Bluetooth devices onyour phone by
following the phone's instructions. Refer to your phone's
user manual for more information.
After a few second the phone will list the device as a
discover device. Select it and follow your phone
instruction to select this pairing.
Then your phone will request a passkey or PIN, enter
0000 as your PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
To use your Bluetooth Stereo Headphone, you must first pair
your Stereo Headphone with a phone or a computer. Once
your Bluetooth Stereo Headphone is paired to a specific
mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your
computer, a Bluetooth adapter is necessary. Install the
adapter on your computer and ensure its Bluetooth
function is activated.
Turn on the device go to the paring mode.
Open the Bluetooth software (such as BlueSoleil)
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetoth software for more information.
After a few second the “ device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device”
with same operation.
Open your media player soft to play music, watch
TV/move and play game, then all the sound will be
playback on your device.
3
4
4.2. Pairing to Mobile phone or other device
PHBT3E USER MANUAL
PHBT3E USER MANUAL
4.3.Charging your device
Value
Parameter
The device easily connects to an AC charger or a USB
charger with cord with Micro USB plug.Make sure that
your device is full charged for at least 6 hours before initial
use. Insert one terminal of your power cord to AC main or USB
port of PC and other end of dord to Micro USB port. While
charging,the red LED is lit constantly. When charging is
completed, the blue LED turns on.
Distortion
1.0%
Playback Time
Charging Time
About 10 hours
Dimension (L&times;W&times;H)
Weight
About 3 hours
About: 4.25 x .86 x 3.7 inch
R ] 6.Service and Support
Warning:
You must have a compatible USB or DC charging
cord.
You must charge the Bluetooth Headset if it has been
not used for more than 12 months.
5.Technical specification
Parameter
Value
Bluetooth
Specification
Bluetooth 2.1+EDR
Bluetooth Profile
A2DP1.2/AVRCP1.0/HSP1.0/HFP1.5
RF Range
32' feet
Frequency
Response
110Hz – 20kHz
Loudspeaker
Output
15mW
Signal-To-Noise
90dB
5
If your device is not performing as it should,please return
it to your place of purchase or the Pyle Service Center for
service.
7. FAQ
1\ Why is there no power even when the Stereo Headphone
is power on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The red LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with
phone or computer, if the connection is not
established, please reconnect again. Make sure the
Stereo Headphone device is paired and connected
target phone or other master device.
3\How can I know the Bluetooth Stereo Headphone has
been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
6
">

Hello! I am an AI chatbot specifically trained to assist you with the Pyle PHBT3E headphone User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Frequently asked questions

Press and hold the power button for 2 seconds until the red LED light turns on and a tone beeps.

Press and hold the power button for 3 seconds until all LED lights turn off and a tone beeps.

1. Turn on the Bluetooth function on your mobile phone. 2. Press and hold the power button on the headphone for 5 seconds until the blue and red LED lights flash alternately. 3. Select "PHBT3E" from the list of available Bluetooth devices on your phone. 4. Enter "0000" as the pairing code if prompted.

Connect the Micro USB end of the charging cable to the charging port on the headphone and the other end to a USB power source. The red LED light will turn on while charging and turn blue when fully charged.

The battery life is about 10 hours of playback time on a single charge.

The Bluetooth range is up to 32 feet.

The headphone supports the following Bluetooth profiles: A2DP1.2, AVRCP1.0, HSP1.0, and HFP1.5.