User Handbook
DPF-D7
7” DIGITAL PICTURE FRAME
IMPORTANT SAFETY INFORMATION
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK)
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
Do not install or operate near any heat sources such as radiators, stoves, or other apparatus that produce heat.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning: To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. The product must not be exposed to dripping and splashing and no object filled with liquids such as a vase of flowers should be placed on the product.
No naked flame sources such as candles should be placed on the product.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device.
Caution: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure.
IMPORTANT
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio ommunication.
However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1
- Consult the dealer or an experienced radio/TV technician for help.
ELECTRICAL INFORMATION
Mains Supply: The mains operating voltage of the power unit is on the rating plate which is on the pin face of the unit.
The means of disconnecting the power supply from the mains supply is the mains plug integrated into the unit. This must be unobstructed and freely operable at all times.
Caution
This appliance operates on a 9V DC supply. The unit is intended for use only with the AC power adaptor supplied with the appliance.
CONTROLS AND FUNCTIONS
TOP VIEW
1 2 3 4 5 6 7 8
REAR VIEW
D
COPY/
DELETE
LH SIDE VIEW
9
1: Power Light
2: Power ON/OFF Key
3: Play/Pause & Mode Key
4: Menu Key
5: Up; Copy/Delete Key
6: Down; Rotate Key
7: Prev. Key
8: Next Key
9: USB 1.1 Input Socket
10: DC 9V Power Input
11: SD/MMC/XD/ Memory Stick Input
10
UNPLUG THE SET FROM THE MAINS WHEN MAKING
CONNECTIONS, ATTACHING OR REMOVING COMPONENTS!
A
C
A: Plug the DC connector in
B: Plug the memory card in
(if you are using one)
C: Hinge out the Stand.
D: Swivel for Portrait orientation.
E: Place on a flat stable surface.
F: Lay Frame back on Stand.
E
2
B
11
F
REMOTE HANDSET CONTROLS
6
5
8
7
SOURCE MENU
HANDSET PREPARATION
Remove the protective strip from the battery compartment. The battery is pre-fitted.
Eventually you will need to replace the battery, To do so follow the procedure as shown in the drawing below
1. Press the catch inward
2. Slide the battery tray out
3. Insert a CR 2025 battery as shown
4. Close the tray.
3
2
CR2025
ZOOM
1
1
2
3
4
1: ZOOM Key
2: Up; Copy/Delete Key
3: Next Key
4: Down; Rotate Key
5: Prev. Key
6: Play/Pause & Mode Key
7: SOURCE Key
8: Menu Key
The handset contains a Lithium cell.
There is a risk of fire and burns if the battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Do not attempt to open or service the battery. Replace only with a
CR2025 battery. Discard used batteries in accordance with recycling regulations in force in your area.
The handset controls are identical to the controls on the Frame Control
Panel with the exception of two additional controls.
ZOOM: increases the picture size.
SOURCE - enables you to switch between pictures stored on an inserted
USB drive and a memory card.
To operate: Point the handset at the remote eye on the frame and press the relevant key.
3
PRELIMINARIES
UNPACKING
The carton contains: The 7” Picture Frame: Remote handset and battery: 9VDC mains power adaptor
Unpack all the components carefully. Inspect the components carefully. If any item is damaged or missing, contact the Tesco store from where you purchased this product, or if that is not possible, your nearest Tesco store. Please have your receipt ready when you call.
Retain the packaging. If you dispose of it, do so in accordance with recycling regulations in your area. Retain the User Handbook. If you pass the unit on to a third party make sure you pass on the handbook.
GETTING STARTED
The Picture Frame has two card input sockets:
The Card Slot will accept a SD, MMC, XD card or a Memory Stick.
To insert a card: Insert the card with the connectors facing down. Push the card in until it clicks.
To remove a card: Press the card in and then release it. The card will now partially eject. Remove the card.
The USB socket accepts a standard USB flash drive of specification 1.1 or 2.0.
$
Plug either a USB drive or a Memory card into the Picture Frame.
If you plug both devices in: the Frame will read the USB card first.
If you do not plug a card or a USB drive in: the Frame will display pictures stored in the unit’s internal memory (if any).
$
Stand the picture frame on a stable level surface where it is unlikely to fall or get knocked over.
$
Unwrap the DC connecting cord.
$
Plug the DC adaptor into the 9V DC input of the Picture Frame.
$
Plug the adaptor into a mains point.
$
Switch on at the mains point.
$
Now press the POWER switch on the Frame to switch on.
POWER
OPERATION
The welcome screen will load
The Frame will detect the Card type and then load the data on the card.
PHOTO
SD/MMC PHOTO
PHOTO
SETTING
SETTING
USB PHOTO
The length of time loading takes will depend on the amount of data on the card.
EMPTY CARD/NO PICTURES ON CARD/WRONG DATA TYPE
If there is no usable data on the card: you will see
NO MEDIA. PLEASE SELECT OTHER FILE
If you do not load a card or USB drive: the frame will display any pictures stored in internal memory.
If there are no stored pictures or inserted media the Welcome Screen will stay on screen.
PHOTO
STORED MEDIA
SETTING
PLAYING PICTURE FILES
If there are usable files on the card:
The frame will enter Slide Show mode and load the card
The amount of time the loading process takes depends on the amount of data on the card as well as the size of the individual pictures.
All the pictures on the card will now display in sequence.
To move to the next picture: Press the NEXT key once
To move on several pictures: Press NEXT repeatedly.
To move to the previous picture: Press the PREV. key once
To move back several pictures: Press PREV the required no. of times.
NOTE: When you use the NEXT/PREV keys to move between pictures, the next picture will have to load. The amount of loading time depends on the size of the picture - large resolution pictures take longer to load.
ROTATING A PICTURE
Press the DOWN/ROTATE key:
Press ONCE to rotate 90º to the right
Press TWICE to rotate the picture 180º
Press THREE TIMES to rotate the picture 270º
Press again to restore the picture to normal view
ROTATE
SWITCHING BETWEEN SOURCES
Press the SOURCE key on the handset to switch between USD and media card inputs. You cannot view pictures stored in the internal memory when a media card or USB drive is inserted.
PLAY MODES
Pressing the PLAY/PAUSE/MODE key cycles the display modes as below:
Slide Show Mode Browse Mode Thumbnail Mode
4
BROWSE MODE
During Slide Show Mode:Press the PLAY/PAUSE/MODE key
The picture currently displaying will pause
The screen will briefly display Browse Mode
Browse mode is a manual mode:
To move to the next picture: Press the NEXT key
To move to the previous picture: Press the PREV. key
After loading the new picture will display and pause.
In Browse mode you can display a picture for an indefinite amount of time.
COPYING A PICTURE TO THE FRAME
Copying a picture can only be done from Browse Mode.
Display the picture to be copied
Press UP/COPY DELETE
COPY?
Yes No
to select, to confirm
COPY/DELETE
To copy the picture
Press PLAY/PAUSE/MODE
WAIT CAPTURE PHOTO 01/15
The message indicates the number of pictures in the memory. You can store up to 15 images
The file will be copied to internal memory and the frame will revert to Browse mode. This process will not delete the picture from the drive.
If you do not want to copy the picture:
Press the NEXT key
to select NO
COPY?
Yes No
to select, to confirm
Press PLAY/PAUSE/MODE to return to Browse Mode
THUMBNAIL MODE
Press the PLAY/PAUSE/MODE key to enter Thumbnail Mode
SD/MMC 002/211 3008 X 200 DSC_0002.JPG
The pictures on the disc will now display in pages of 12 thumbnails. After the page has loaded the current picture will be highlighted and basic information about the current picture will be displayed in the lower widow.
To move to the next picture: Press the NEXT key
To move to the previous picture: Press the PREV. key
To move to the next page of thumbnails:
Press the DOWN/ROTATE key
To move to the previous page of thumbnails:
Press the UP/COPY DELETE key
To select and play the current picture:
Press the PLAY/PAUSE/MODE key.
The frame will load the picture and then enter Slide show mode. All the pictures on the disc will now play starting with the selected picture.
ZOOM AND PAN
ZOOM
To increase the picture size on the screen, press the ZOOM key on the handset.
The picture increases 100% 133% 150% 200% and back to 100%
!
If you are in Slide show mode the picture is paused and will stay on screen indefinitely. Setting the Zoom to 100% will resume normal play.
PAN: In ZOOM mode
!
Press the keys to move the picture up, down and sideways.
5
PLAYING PICTURES IN THE FRAME MEMORY
Switch the Frame off with the POWER key.
Remove the USB and/or memory card.
Switch the Frame ON with the POWER key.
The Welcome Screen will load
The message STORED MEDIA will appear.
PHOTO
All pictures in the internal memory will now play in Slide Show Mode
STORED MEDIA
Browse Mode and Thumbnail Mode are available.
SETTING
DELETING A PICTURE FROM THE FRAME
Enter BROWSE MODE. Display the picture to be copied
Press UP/COPY DELETE
DELETE?
Yes No
to select, to confirm
COPY/DELETE
If you do not want to delete the picture
Press PLAY/PAUSE/MODE to return to Browse Mode
If you want to delete the picture:
Press the PREV. key to select YES
Press PLAY/PAUSE/MODE to delete the file.
DELETE?
Yes No
to select, to confirm
The Frame will now return to Browse Mode and display the first picture on the frame
6
THE SETUP MENU
Your digital picture frame can be set up to suit your personal preference.
Switch the Frame on with the POWER key.
Press the NEXT or PREV. keys to highlight the
SETTING icon.
Press the PLAY/PAUSE/MODE key
PHOTO
SETTING
Press the UP/DOWN keys to select a MENU ITEM
Press the NEXT key to access the Menu Item
Press the required keys to select a setting
Press the PLAY/PAUSE key to confirm the setting
Now press the DOWN key to move to the next menu choice
--GENERAL SETUP PAGE–
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
EXIT SETUP
02
05 S
NORMAL
OFF
BRIGHTNESS
Press the keys to select
BRIGHTNESS
Press the key to enter the menu
Press the brightness level
USE TO DIRECT USE TO SELECT ITEM
GO TO GENERAL SETUP PAGE
key to select the
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
EXIT SETUP
02
05 S
NORMAL
OFF
Press to confirm and return to the main menu.
Brightness +2
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
02
05 S
NORMAL
OFF
SETTING UP THE PICTURE FRAME
SLIDE SHOW TIME
This menu allows you to set the time a picture stays on the screen in Slide Show Mode.
Press the keys to select SLIDE SHOW TIME
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
EXIT SETUP
02
05 S
NORMAL
OFF
05 Seconds
10 Seconds
30 Seconds
01 Minute
Press the key to enter the menu
Press the keys to alter the Slide Show Time
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
EXIT SETUP
02
05 S
NORMAL
OFF
05 Seconds
10 Seconds
30 Seconds
01 Minute
MATTING
This allows you to add tasteful themed picture frame effects to the screen.
Press the keys to select MATTING
Press the key to enter the menu
Press the keys to select a Frame mode
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
DEFAULT
EXIT SETUP
02
10 S
NORMAL
OFF
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
OFF
Press to confirm and return to the main menu.
PHOTO MODE
Because most digital cameras use an aspect ratio different from the Frame you may see black bars at the sides of some pictures. Photo mode lets you to expand the image (ZOOM) to full screen. Some top/bottom cropping may occur.
Press the keys to select PHOTO MODE
Press the key to enter the menu
Press the keys to select NORMAL or ZOOM
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
02
10 S
NORMAL
OFF
NORMAL
ZOOM
Press to confirm and return .
Press to confirm and return .
DEFAULT
This allows you to restore the Picture frame to the settings it had when it left the factory.
Press the keys to select DEFAULT
Press the key to enter the menu
BRIGHTNESS
SLIDESHOW TIME
PHOTO MODE
MATTING
02
05 S
NORMAL
OFF
DEFAULT RESET
EXIT SETUP
Press the PLAY/PAUSE key to restore default settings
If you do not want to restore factory Defaults:
Press the key to return to the main menu.
TO EXIT THE MAIN MENU
Press the keys to select EXIT SETUP
MATTING
DEFAULT
EXIT SETUP
OFF
7
Press the PLAY/PAUSE key to Exit
PHOTO
SD/MMC PHOTO
This brings you back to the Main Screen.
Press the key
This highlights the PHOTO icon and restarts Slide
Show mode.
PHOTO
SD/MMC PHOTO
SETTING
SETTING
FURTHER INFORMATION
Internal Memory and Picture Resolution
The Internal Memory of the Frame is 16Mb. This is sufficient for 15 pictures. Images above 1Mb will automatically be downsampled to about 1Mb.
The screen resolution is 800x480 pixels. This corresponds to a total resolution of 340,000 pixels
(0.340MP). Playing very high resolution pictures through the screen will slow loading times without improving viewability.
Formats, Files and Folders
This unit recognises JPG format pictures. If there are other files on the disc these will not be recognised.
If the pictures are organised in folders, the folder structure will not be recognised but all the JPG format pictures will be recognised and played.
Extended Use
Heat: After extended use, the frame may get warm.
This is normal and not a cause for concern.
Screen Burn: Contrary to popular belief, if you leave a static picture on the screen for a long time you may leave a permanent ‘after image’ on the screen. The Slide show mode stops this from occurring.
IMPORTANT NOTE:
Many pictures will not be viewable over the full screen. Because most digital cameras use an aspect ratio of either 3:2 or 4:3 whereas the Picture Frame has an aspect ratio of 16:9, black bars may appear at the sides of your pictures - this is normal and not a fault. See P. 7 for information on extending an image to full screen.
CARE AND WARRANTY
After Use
Switch the set off via the POWER switch.
Unplug the adaptor from the mains supply and then unplug the adaptor from the Picture Frame.
Unplug any connected memory card or USB stick.
Store the unit and the power adaptor in a cool dry place, out of the reach of children and pets.
Care and Cleaning
Care and cleaning operations should be carried out with the unit unplugged from the mains.
The plastic and metal parts can be cleaned with a barely damp cloth and then dried carefully.
Do NOT touch the screen with bare fingers, or with hard or pointed objects. Clean the screen carefully with a specially treated cloth, such as a Calotherm cloth available from chamists and opticians.
Warranty
Your Technika appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please contact the
TESCO electrical help line on 0845 456 6767.
Please have your original purchase receipt with you when you call. This warranty in no way affects your consumer rights.
8
SPECIFICATIONS
Model:
Power Supply:
DPF-D7
DC 9V
DC 9V1A/AC100-240V Power adaptor:
Internal Memory 16Mb
Screen Resolution: 800 x480 pixels
USB Compliance USB 1.1or higher
Memory Card Input SD/MMC/MS/XD
UK: Waste electrical products should not be disposed of with household waste.
Separate disposal facilities exist, for your nearest facilities see www.recyclemore.co.uk or in-stor e for details.
ROI: Produced after 13th August 2005. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
WARRANTY
Your Tesco appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please contact the TESCO electrical help line on 0845 456 6767. Please have your original purchase receipt with you when you call. This warranty in no way affects your consumer rights.
SPECIFICATIONS
Supply Voltage :
Battery Back-up:
Power Consumption :
Radio Frequency Range :
AC 230-240V ~ 50Hz
2x1.5V AA batteries
21W
FM 87.5 - 108 MHz
AM 530 - 1600 kHz
Amplifier Output Capacity: 3.2 W
Produced after 13th August 2005.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice
.
Tesco Stores Ltd, Delamare Road, Cheshunt, Herts, EN8 9SL
