- No category
advertisement
Client Manual
1.0.0.4
(English Version)
Yeastar Information Technology Co., Ltd.
Table of Contents
MyPBX Client Manual
Part 1 How To Activate MyPBX Client Addon · · · · · · · · · · · · · · · 4
1 Activate MyPBX Client Addon ·
· · · · · · · · · · · · · · · · · · · · · 4
2 MyPBX Client Addon Settings ·
· · · · · · · · · · · · · · · · · · · · · 6
Part 2 How to use Client software · · · · · · · · · · · · · · · · · · · · 8
· · · · · · · · · · · · · · · · · · · · · · · · · · · 8
· · · · · · · · · · · · · · · · · · · · · · · · 9
· · · · · · · · · · · · · · · · · · · · · · · · 14
· · · · · · · · · · · · · · · · · · · · · · · 16
4.2.1 Contacts Group Management ····························································· 18
4.15.1 About MyPBX Client ······································································· 46
· · · · · · · · · · · · · · · · · · · · · · · · · · 48
5.1.1 Call Internal Extension Number ··························································· 48
5.1.2 Call External Line Number ································································· 49
www.yeastar.com
Page 2
MyPBX Client Manual
5.5.1 Pick up a call from appointed extension ················································· 54
5.10.1 Record Conversation ······································································ 64
· · · · · · · · · · · · · · · · · · · · · · · 69
www.yeastar.com
Page 3
MyPBX Client Manual
Part 1 How To Activate MyPBX
Client Addon
1 Activate MyPBX Client Addon
To activate client Addon, you should provide your MyPBX LAN MAC address. You can find it on the motherboard or the enclosure of MyPBX.
Here is a screenshot of a MAC address:
(Figure 1-1)
Notes:
1. Client addon is available on MyPBX Enterprise/U100/U200/
U300/U5XX series only now.
2. LAN MAC is the key to get license.
Please contact the reseller/dealer from whom you got the MyPBX to purchase activation license.
Below is the steps to activate the Client addon:
Step 1. Click “Addons” to switch to the Client addon activation page. www.yeastar.com
Page 4
MyPBX Client Manual
(Figure 1-2)
Step 2. Click “Install” and enter the activation code you purchased, then click “Active”.
(Figure 1-3)
Step 3. After you click “Active”, MyPBX will pop up a reboot tag. Click “Reboot now”, the activation will take effect permanently after the MyPBX reboots.
Notes:
1. Activation is permanent in MyPBX even if you make a factory reset on MyPBX. If you want to change the number of client, you should enter the activation code again and confirm the number of client.
2. By default, MyPBX can support 2 clients even if you don’t activate it.
3. When you purchase activation code, you can ask for another developer, which is
“yea” by default.
4. You cann’t install the activation code on another MyPBX. www.yeastar.com
Page 5
2 MyPBX Client Addon Settings
MyPBX Client Manual
You can disable/enable/update the addon after it is activated successfully.
(Figure 2-1)
Disable MyPBX Client addon
You can click “Disable” to disable MyPBX client addon temporarily.
Click “Disable”, MyPBX will pop up the window below, and then click “OK” to disable it.
(Figure 2-2)
Enable MyPBX Client addon
If you have disabled MyPBX client addon, you can enable it again by clicking “Enable”.
(Figure 2-3)
Update MyPBX client addon license
If you want to change the number of client which MyPBX supports, click “Update” and enter the activation code and client number to active it again.
(Figure 2-4) www.yeastar.com
Page 6
MyPBX Client Manual
(Figure 2-5) www.yeastar.com
Page 7
MyPBX Client Manual
Part 2 How to use Client software
1 Introduction
MyPBX Client has clean and user-friendly interface as well as lovely icons. The simple and human-based practices allow users to click to call out so easily that they don’t need to remember any number; when users engaged themselves in thinking, no need to be disturbed or annoyed by constant ringing tones, just give a “command” and MyPBX Client will help you to politely decline incoming calls; when users are absent, no need to worry about missing any important calls, MyPBX Client can help record voice messages.
Not only is MyPBX Client with call management functions that can easily manage the call conference, voicemails and call recordings, but also a unified communication terminal that can send internal instant messages. www.yeastar.com
Page 8
MyPBX Client Manual
2 Install MyPBX Client
This section shows how to install MyPBX Client software on the PC.
1. Download the MyPBX from
2. http://www.yeastar.com/download/MyPBX-Client/MyPBXClientSetup1.0.0.4.exe
Double click the “ MyPBX ClientSetup1.0.0.4.exe
”, “Welcome to the MyPBX Client
Installation” screen will come up. Click “Next” to continue.
(Figure 2-1)
3. Read through the software License Agreement, select “I agree with the above terms and conditions”, and then click Next to continue. See Figure2-2.
www.yeastar.com
Page 9
MyPBX Client Manual
(Figure 2-2)
4. Click Next after going over the provisions.
5.
0
(Figure 2-3)
The Destination folder screen allows you to decide where to store MyPBX Client on your www.yeastar.com
Page 10
computer. Click ”Next” to continue.
MyPBX Client Manual
(Figure 2-4)
6. A screen pops up to notify you that:
(1) Run Installed application
(2) Create Shortcut(s) on Desktop
(3) Start MyPBX Client when I start Windows
Enable the options as you wish, and then click ‘Next’.
www.yeastar.com
Page 11
MyPBX Client Manual
7.
(Figure 2-5)
Enter into the “Installing Files” page. The system begins the installation, which will take a while.
8.
(Figure 2-6)
When the installation is complete, a screen will pop up to notify you that the software is installed successfully. Click Finish.
www.yeastar.com
Page 12
MyPBX Client Manual
(Figure 2-7) www.yeastar.com
Page 13
MyPBX Client Manual
3 Log in MyPBX Client
After the installation, you can enjoy the powerful functions MyPBX Client offers.
Double-click shortcut and launch MyPBX Client. Please enter your Ext. number and password and then click “Sign In”, see Figure 3-1.
Please pay attention when you log in for the first time:
Please click “Tools” on menuOptions, and enter the IP address of MyPBX Server and
Client Developer on Figure 3-2. You can get this IP and developer from
Admin.
About Ext. and Password
Obtain the Extension and Password from your system Admin before you log in MyPBX Client. The password for extension is the voicemail PIN.
Check it on the extension edit page on MyPBX.
If you want to modify password, please see details on Chapter 4.7
Personal Profile.
(Figure 3-1) www.yeastar.com
Page 14
MyPBX Client Manual
(Figure 3-2)
Note: On Sign in screen, you can also enable following settings : www.yeastar.com
Page 15
MyPBX Client Manual
4 Managing MyPBX Client
4.1 Extension Management
When sign in MyPBX, system opens a main screen Extension screen as Figure 4-1 shows.
Here you can edit your profile.
Call Task (pull-down)
You can create, show, clear and refresh all tasks.
Conference
Open a conference window with selected member.
Enter the ext. number you want to call here, or choose a
Click here you can show or hide dialed number through the keyboard (Figure 4-2) pull-down button.
Call button, call the number entered in the above frame.
n
(Figure 4-1)
End call button www.yeastar.com
Page 16
MyPBX Client Manual
Indicates client user is offline
(Figure 4-2)
Indicates client user is online
Indicates extension is unregistered or unavailable
Indicates extension is idle
Indicates extension is ringing
Indicates extension is busy www.yeastar.com
Page 17
MyPBX Client Manual
4.2 Contacts Management
After signed in MyPBX Client, you can see “Contacts” tag as Figure 4-3 shows. Here, you can add, edit, delete, send, import and export your private contacts.
(Figure 4-3)
4.2.1 Contacts Group Management
You can see contacts in group through “View” “Show Contacts Group” (see Figure 4-4). www.yeastar.com
Page 18
Add new group
Contact groups list
MyPBX Client Manual
Delete selected group
(Figure 4-4)
4.2.2 Add New Contact
1.
You can add new contact through MenuAdd New Contact (Figure 4-5a) or click the mouse to open the adding screen as Figure 4-5b shows. www.yeastar.com
Page 19
MyPBX Client Manual
(Figure 4-5a) (Figure 4-5b)
2. Please edit contact’s profile on the following screen; the details include name, office phone, and company name and so on. (Figure 4-6)
(Figure 4-6) www.yeastar.com
Page 20
MyPBX Client Manual
3. Click “Ok” or “Apply” to add new contact.
Note: On call history, right click on the item and from the menu you can “Save Number” to your contacts.
4.2.3 Edit Contact’s Profile
1. Click on the chosen contact, and open the “Contact” menu “Edit contact’s profile” as Figure
4-7a shows or right click to open the menu as Figure 4-7b shows.
(Figure 4-7a) (Figure 4-7b)
2. Here you can modify the contact’s information. See Figure 4-8.
www.yeastar.com
Page 21
MyPBX Client Manual
(Figure 4-8)
3.
Click “OK” to save the changes.
4.2.4 Delete Contact
1. You can delete the chosen contact through menu “Contacts”“Delete contact” or click on right mouse to delete directly. www.yeastar.com
Page 22
MyPBX Client Manual
(Figure 4-9a) (Figure 4-9b)
2. Click “Yes” to delete this contact as Figure 4-10 shows.
(Figure 4-10)
4.2.5 Import Contact
1.
You can import contacts from menu “Contacts”--> “Import Contact”. www.yeastar.com
Page 23
MyPBX Client Manual
(Figure 4-11)
2.
Select the file (.csv) you want to import and click “Open” button (figure 4-12).
www.yeastar.com
Page 24
MyPBX Client Manual
(Figure 4-12)
3.
Double click the item to select corresponding address, see Figure 4-13.
(Figure 4-13)
4. Click “OK” to finish this step.
4.2.6 Export Contacts
1.
You can export contacts to save on computer as well. See Figure 4-14. www.yeastar.com
Page 25
MyPBX Client Manual
(Figure 4-14)
2.
Select the routing that you want to save, and then click “Save” to finish as Figure 4-15 shows. www.yeastar.com
Page 26
MyPBX Client Manual
(Figure 4-15)
4.2.7 Upload local data to server
You can upload local data to MyPBX server to save it. See Figure 4-16.
Note: If you have uploaded local data to MyPBX server and you want to upload it again, your data on MyPBX server will be covered with new data. www.yeastar.com
Page 27
MyPBX Client Manual
(Figure 4-16)
4.2.8 Download client data
Since you have uploaded local data to MyPBX server, the next time you change a PC to log in
MyPBX Client, you can download client data from MyPBX server using the same username. The operation is also used in case of losing data.
Note: If you download client data, the local data on PC will be covered. www.yeastar.com
Page 28
MyPBX Client Manual
(Figure 4-17)
4.3 Call History
After signed in MyPBX Client, click “History” tag to enter the call log screen (Figure 4-18). Here you can see all the calls that have you made or answered. Call information including callee name, telephone number, call time, and duration will be available on the list. www.yeastar.com
Page 29
MyPBX Client Manual
You can arrange items in sequence according to call types, number, name, call time, and duration.
Right click on the selected item, you can generate a call, save number or delete this item from the list.
(Figure 4-18)
Stands for incoming call
Stands for outgoing call
Stands for missed call
4.4 Voicemail Management
After signed in MyPBX Client, click “Voicemail” tag to enter the voicemail listing screen (Figure
4-19). Here you can see all the caller number, name, call time, and duration. www.yeastar.com
Page 30
Play
Play selected voicemail. When playing, click the button to pause it.
MyPBX Client Manual
Stop Button
Click this button to stop the playing.
(Figure 4-19)
Unread message
Read message
Inbox: the folder where new message is stored
Old: after reading the message, the message will be automatically moved to this folder
Work: after reading the message, the message can be moved to this folder
Family: after reading the message, the message can be moved to this folder
Friend: after reading the message, the message can be moved to this folder
Note: You can call the number, save or delete the voicemail through right-clicking, but you can’t directly move the message to other folders. www.yeastar.com
Page 31
MyPBX Client Manual
4.5 Recording Management
After signed in MyPBX Client, click the “Reading” tag to enter the calls reading list screen (Figure
4-20). Here you can see all the status, call time, and duration.
Play
Play selected recording. When playing, click the button to pause it.
Stop Button
Click this button to stop the recording of the current call.
(Figure 4-20)
Note: You can call the number, save or delete the recording through right-clicking. www.yeastar.com
Page 32
MyPBX Client Manual
4.6 Call Status Management
1. When there’s an incoming call, a prompt screen will show the caller’s detailed information.
If you have already edited the caller or extension‟s profile, it will display the profile.
Click here to forward the incoming other extension or outside numbers
Click this button to reject the call.
(Figure 4-21)
2. When there’s an outgoing call, a prompt window will show the callee’s detailed information. www.yeastar.com
Page 33
MyPBX Client Manual
(Figure 4-22)
3. During a call, it prompts as Figure 4-23 shows. www.yeastar.com
Page 34
MyPBX Client Manual
Hold On
Click this button, it will hold on the call.
Call Forward
Click this button to forward the call to other extension/ contacts/ring group.
Record Button
Click this button to record the conversation.
Time
Show duration call
(Figure 4-23)
4.7 Personal Profile
For the convenient communication with your colleagues and friends, MyPBX Client provides personal information management, so that you can update profile at any time.
After signed in MyPBX Client, click “File” “Edit profile” to open personal information screen. www.yeastar.com
Page 35
MyPBX Client Manual
(Figure 4-24)
(Figure 4-25)
Here you are allowed to change name, mobile phone number.
You can change password through “File” “Change Password” setting as Figure 4-28 shows.
Open the password screen as Figure 4-26 shows and enter both the old and new password, after www.yeastar.com
Page 36
which a pop-up will prompt you as Figure 4-27 shows.
MyPBX Client Manual
(Figure 4-26)
(Figure 4-27)
4.8 Refresh
You can right click the mouse and click “Refresh” on menu as Figure 4-28 shows to gain the latest data. For example, the current page shows all extensions, MyPBX Client will get the extension information again after clicking “Refresh”. www.yeastar.com
Page 37
MyPBX Client Manual
(Figure 4-28) www.yeastar.com
Page 38
MyPBX Client Manual
4.9 Show Dial Panel or Not
You can set up whether or not to show dial panel on menu “View” “Show dial panel”. (Figure
4-29)
(Figure 4-29) www.yeastar.com
Page 39
MyPBX Client Manual
4.10 Change Language
MyPBX Client has multiple language versions. You can change the Client language through “Tools”
“Change Language”. (See Figure 4-30)
(Figure 4-30) www.yeastar.com
Page 40
MyPBX Client Manual
4.11 Call Forwarding
You can forward incoming calls at any time. Configure it through “Tools” “Options” (Figure
4-31).
(Figure 4-31)
Always: Always forward calls
No answer: If no answer calls will be forwarded to
When Busy: forward calls when you are busy in a call
Transfer to: the incoming call will be transferred to “Voice Mail” or the designated “Number” according to your own demands. www.yeastar.com
Page 41
MyPBX Client Manual
Note: If call forwarding is set to external line number, please input the prefix before number.
For example, “9” stands for PSTN trunk routing, “81” stands for SIP trunk routing, and “7” stands for Skype trunk.
4.12 Feature Codes
You can check the shortcut operation of call on hold, pick up calls and so on. Click on menu “Tools” “Options” “Feature Codes” (Figure 4-32a) or click on “Feature codes” on the interface directly as Figure 4-32b shows.
(Figure 4-32a) (Figure 4-32b) www.yeastar.com
Page 42
MyPBX Client Manual
(Figure 4-33)
4.13 Speed-dial
On menu “Tools” “Options” “Speed Dial”, you can check the speed-dial number on Figure
4-34. For example, if you want to call number 918859206002, then just dial 123 directly. www.yeastar.com
Page 43
MyPBX Client Manual
(Figure 4-34)
4.14 Calls
Through the menu “Tools”→ “Options”→ “Calls” to manage the calls. www.yeastar.com
Page 44
MyPBX Client Manual
(Figure 4-35)
Pop-up windows when someone call in: Client will bomb the caller’s ID for an incoming call.
Dial Pattern
Automatically answer dialing out: When you enable this option and click a number to dial out, your IP phone will answer it first.
Note: You should select your IP phone type correctly. For example, if you are using Yealink IP phone, please select Yealink. www.yeastar.com
Page 45
4.15 Help
MyPBX Client Manual
(Figure 4-36)
4.15.1 About MyPBX Client
You can know the MyPBX Client version number and copyright through menu “Help” “About
MyPBX Client”. See Figure 4-37. www.yeastar.com
Page 46
MyPBX Client Manual
(Figure 4-37)
4.16 Sign out & Exit
You can exit from MyPBX Client on menu “File” “Exit” or you can click on MyPBX icon on right tray and click “Exit” to exit as Figure 4-38 shows.
(Figure 4-38) www.yeastar.com
Page 47
MyPBX Client Manual
5 Main Functions
5.1 Dialing Call
Press a key to dial out easily on MyPBX Client that simple the dialing procedure and save time.
Just move the mouse on the telephone and click it to dial out.
5.1.1 Call Internal Extension Number
You can call an extension number through three ways:
(1) Double click the selected Ext. number to call out
(2) Enter the Ext. number on the input box below and click “Call” button or “Enter” to call out
(3) Click the Ext. number on the panel and then click “Call” or “Enter” to call out
Enter telephone number here to call out
(Figure 5-1) www.yeastar.com
Page 48
MyPBX Client Manual
5.1.2 Call External Line Number
(1) Call external line numbers on contacts list: You can double click on the selected number, and the system will call it with default routing. (If you don’t want to use the default routing, just select the number and change the prefix on the input box below, system will save this new prefix and apply it to this number when you call it out next time).
Double click it to call out
Number will be shown on input box. „9‟ is the prefix of default routing.
(Figure 5-2)
(2) Call external line numbers that are not on contacts list: You can enter the number on the input box and add the prefix to it, such as “9” for PSTN line routing, “81” for SIP routing; you can enquiry Admin for other settings. System will auto call this number out from an idle trunk.
5.1.3 Call back a missed call
When you miss the incoming calls, just do as follows:
(1) Double click the number on History list and call out by default routing.
(2) Select the number on History list and add the prefix on input box to call out through www.yeastar.com
Page 49
designated routing.
5.2 Incoming Calls
You can execute the following operations for an incoming call:
• reject it
MyPBX Client Manual
Click here to reject the call
(Figure 5-3)
5.3 Call Forward
Do you always encounter the following situations in office?
1. Answered a call only to find that you are not wanted on the phone but your colleague.
2. You are on a call, and there’s another incoming call that you don’t want to miss.
3. You are busy doing things and have no time to answer calls.
4. You have to go out, but don’t want to miss any calls.
Don’t worry. MyPBX Client will help you deal with these. www.yeastar.com
Page 50
MyPBX Client Manual
5.3.1 Forward before a call
When you go out or are too busy to answer a call, you can forward incoming calls to your mobile
or other number. Please see details on 4.11 Call Forwarding .
5.3.2 Transfer during a call
Step 1: Click the “Transfer call” button as Figure 5-4 shows
Click this button to forward
(Figure 5-4)
Step 2: Select the number that you want to forward to on the pop-up screen (Figure 5-5). Click to select a number, double click to forward call directly to this number. You can forward a call to an extension, a contact, a ring group/IVR, or a telephone number entered on the input box. (You need to add a prefix for forwarding to an external line number.) www.yeastar.com
Page 51
MyPBX Client Manual
(Figure 5-5)
Step 3: Hang up the call to finish transferring or click “Flash” button to intercept a transferred call. www.yeastar.com
Page 52
MyPBX Client Manual
(Figure 5-6)
5.4 Call Parking
When you are on a call, you can park the current call on the Client instead of dialing feature code.
In this case, you can click the “Call Parking” button and then MyPBX will give you a parking number. Dial this parking number on any extension to continue this call.
Hang up to finish transferring www.yeastar.com
Page 53
MyPBX Client Manual
Call Parking button
Click here to park the call
(Figure 5-7)
5.5 Pick up a Call
5.5.1 Pick up a call from appointed extension
When your colleague is absent, his phone keeps ringing, you can pick up this call through the following way:
On extension list, choose the ringing or on hold extension, right click and click “Pick up Call” on the pop-up screen as Figure 5-8 shows. www.yeastar.com
Page 54
MyPBX Client Manual
(Figure 5-8)
5.6 Call Task
Call Task can help you to call out a number on scheduled time or remind you to make a call to a preset number.
(1) You can conduct the corresponding operation through the drop-down screen as Figure 5-9 shows. www.yeastar.com
Page 55
MyPBX Client Manual
(Figure 5-9)
Make new call task: click here to pop-up a screen as Figure 5-11 shows
Show all call tasks: click here to open the task list as Figure 5-10 shows
Clear all call task: click here to delete all pre-arranged tasks
Refresh call task: click here to refresh the tasks list www.yeastar.com
Page 56
MyPBX Client Manual
(Figure 5-10)
New: Click here to create a new task as Figure 5-13 shows
Edit: Click here to edit the chosen task item
Delete: Click here to remove the selected task item
(2) Input the telephone number, call time, etc on window Figure 5-13.
The number you want to call
Select a time or period to call out
At what time you want to call
Name of this call task
Enable this function, when
Enable this function, when the time arrives, the system the time arrives, the system will only remind you to will call the number make the call
(Figure 5-11)
(3) Click “OK” to finish creating or editing task. You will see the latest task on MyPBX Client interface as Figure 5-12 shows. automatically www.yeastar.com
Page 57
MyPBX Client Manual
(Figure 5-12)
5.7 Call Conference
MyPBX provides the call conference for users. You can invite max.30 users to join the conference by MyPBX Client. www.yeastar.com
Page 58
Call Conference
Click here to invite members
MyPBX Client Manual
(Figure 5-13)
Step 1: Click “Call Conference” button to have the pop-up a screen as Figure 5-14 shows so as to invite people to join a conference. www.yeastar.com
Page 59
MyPBX Client Manual
(Figure 5-14)
Step 3: You are allowed to select people in the extension list to join this conference.
Step 4: Click “OK” to see the conference call interface as Figure 5-15 shows. www.yeastar.com
Page 60
MyPBX Client Manual
(Figure 5-15)
5.8 Internal Instant Message
MyPBX Client provides the internal instant message feature for users to chat easily with members on the extensions list.
Step 1: On extensions list, select the member you want to chat with, right click to open the chat screen. www.yeastar.com
Page 61
MyPBX Client Manual
(Figure 5-16)
Step 2: Chat with selected extension user as Figure 5-17 shows. www.yeastar.com
Page 62
MyPBX Client Manual
Words Input
Box
(Figure 5-17)
5.9 Voicemail
5.9.1 Leave a voicemail
Set “Forward to Voicemail”: Please check 4.11 Call Forwarding
5.9.2 Play a voicemail
When someone leaves a voice message on your voicemail, you can listen to the message directly.
Please check 4.4 Voicemail Management.
www.yeastar.com
Page 63
MyPBX Client Manual
(Figure 5-18)
Step 1: Select a voicemail and click “Play” button or double click the selected item to listen to it.
Step 2: You can click “Stop” button or hang up the phone to stop the play.
5.10 Recording
5.10.1 Record Conversation
MyPBX Client provides recording function for users to record conversation.
During a call, you can click “Recording” button as Figure 5-19 shows; the system will start the recording this conversation. Click “Stop” button when over; the system will auto finish the recording when you hang up the call. www.yeastar.com
Page 64
MyPBX Client Manual
(Figure 5-19)
5.10.2 Play Recording
All recordings will be stored on “Recording” listing, please refer to 4.5 Recording Management.
Recording www.yeastar.com
Page 65
MyPBX Client Manual
(Figure 5-20)
(1) Select the item that you want to play, click “Play” button or double click on selected item.
(2) You can click “Stop” button or hang up the phone to stop the play.
5.11 SMS
Right click the mouse and click “Send SMS” as Figure 5-21 shows, it will pop-up a window for sending text as Figure 5-22 shows. www.yeastar.com
Page 66
MyPBX Client Manual
(Figure 5-21) www.yeastar.com
Page 67
MyPBX Client Manual
(Figure 5-22)
Note: Before sending a SMS, please confirm that the correct configuration of SMS setting is made on MyPBX to make Email to SMS work. Choose one GSM trunk and the corresponding country code on the SMS window first, and send the SMS. www.yeastar.com
Page 68
MyPBX Client Manual
6 Uninstall MyPBX Client
Uninstalling MyPBX Client will delete all your data, including contacts number, call log and recorded voicemail on this PC. Before you uninstall MyPBX Client, make sure you have backed up the data you need.
Method 1:
1. Go to the Window’s Start menu and open MyPBX Client Uninstall
2. The next prompt screen will guide you to close the current running program first.
Choose “Next” to continue the uninstallation program.
(Figure 6-1)
3. The Uninstallation progress will delete the MyPBX Client files from your computer. When the uninstallation is complete, the Uninstall Finished screen will pop up. Click Finish button. www.yeastar.com
Page 69
MyPBX Client Manual
(Figure 6-2)
Method 2:
1. Go to the Windows Start menu and open the Control Panel.
2. Go to the Add or Remove Programs, which will open a new screen with a list of software programs installed on the computer. Scroll down to MyPBX Client and click Change/Remove button.
[Finish] www.yeastar.com
Page 70
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 16 4.1 Extension Management
- 18 4.2 Contacts Management
- 18 4.2.1 Contacts Group Management
- 19 4.2.2 Add New Contact
- 21 4.2.3 Edit Contact’s Profile
- 22 4.2.4 Delete Contact
- 23 4.2.5 Import Contact
- 25 4.2.6 Export Contacts
- 27 4.2.7 Upload local data to server
- 28 4.2.8 Download client data
- 29 4.3 Call History
- 30 4.4 Voicemail Management
- 32 4.5 Recording Management
- 33 4.6 Call Status Management
- 35 4.7 Personal Profile
- 37 4.8 Refresh
- 39 4.9 Show Dial Panel or Not
- 41 4.11 Call Forwarding
- 42 4.12 Feature Codes
- 43 4.13 Speed-dial
- 44 4.14 Calls
- 46 4.15 Help
- 46 4.15.1 About MyPBX Client
- 47 4.16 Sign out & Exit
- 48 5.1 Dialing Call
- 48 5.1.1 Call Internal Extension Number
- 49 5.1.2 Call External Line Number
- 49 5.1.3 Call back a missed call
- 50 5.2 Incoming Calls
- 50 5.3 Call Forward
- 51 5.3.1 Forward before a call
- 51 5.3.2 Transfer during a call
- 53 5.4 Call Parking
- 54 5.5 Pick up a Call
- 54 5.5.1 Pick up a call from appointed extension
- 55 5.6 Call Task
- 58 5.7 Call Conference
- 61 5.8 Internal Instant Message
- 63 5.9 Voicemail
- 63 5.9.1 Leave a voicemail
- 63 5.9.2 Play a voicemail
- 64 5.10 Recording
- 64 5.10.1 Record Conversation
- 65 5.10.2 Play Recording
- 66 5.11 SMS