User Guide

User Guide
SBT559 User Manual
Location of Controls
Using your Bluetooth Headphones
On an Android Phone
• Go to SETTINGS > BLUETOOTH
Search for devices (Make sure Bluetooth is
turned ON)
Right earpiece
Bluetooth Headphones
12:12 PM
Bluetooth settings
Bluetooth
1
2
3
4
Visible
Make device visible
Search for devices
Bluetooth Headphones
User Guide
SBT559
On other Cell Phones/Devices
• Review the instruction manual that came
with your phone/device.
Bluetooth: Enabled
Paired Devices:
*Empty *
Searching for devices
Rejecting a call
To reject a call, press the [
Redial a number
Double press the [
will be redialed.
] button for 2 seconds.
] button. The last number called
User Guide
Playing Music
1. Press and HOLD the [ ] button for 6 seconds until
the voice prompt “Bluetooth enter pairing mode” is
heard and the LED indicator light flashes RED
and BLUE alternately.
2. Keep your Bluetooth headphones and Bluetooth
enabled device within 3 feet of each other during
the pairing process.
3. Set your mobile phone or other Bluetooth enabled
device to search for Bluetooth devices.
To enjoy wireless music on your Bluetooth
Headphones, make sure you are connected to a
Bluetooth enabled device. Once connected, you can
control the music with the controls on the headphones or on your connected device.
Micro USB
Charging Cable
On an iPhone
• Go to SETTINGS > BLUETOOTH
(Make sure Bluetooth is turned ON)
12:12 PM
Charging the Bluetooth Headphones
1. Connect the small end of the Micro USB charging cable
to the charging port on the headphones.
2. Connect the large end of the Micro USB charging cable
to your computer's USB port or an AC adapter (not
included).
3. The LED indicator light turns RED when charging.
4. When fully charged, the LED indicator light turns off.
Bluetooth
ON
Paired
3G
Bluetooth
Micro USB
Charging Cable
Bluetooth:
On
Discoverable:
Yes
Paired Devices
Add New Device
SBT559
Computer
Make sure you charge your headphones for at least 4
hours before using them for the first time.
Most media enabled smart phones will display
“Connected to phone audio and media” when
connected to the Bluetooth headphones. This
means you can make phone calls and enjoy your
music.
Play/pause
• Quick press the [
• Quick press the [
] button to play music.
] button to pause music.
Skipping songs
• Quick press the [ + ] button to skip to the previous
song.
• Quick press the [ - ] button to skip to the next song.
Adjusting the volume
• To increase the volume, long press the [ + ] button.
• To decrease the volume, long press [ - ] button.
Now discoverable
On a Blackberry
• Go to SETTINGS/OPTIONS > BLUETOOTH
• Enable BLUETOOTH
Micro USB
Charging Port
The screenshots above are typical of many Bluetooth
enabled devices in the market today, and are used
to assist in the explanation of the pairing process.
Your Bluetooth enabled device’s interface and
interaction with the headphones may differ slightly
from the illustrations above.
The SBT559 supports a multi-connect function that
allows the headphones to pair with two mobile devices
at the same time. To connect to a second device:
Devices
SBT559
4. When the Bluetooth enabled device finds the
headphones, select “SBT559” from the list of
found devices.
5. If required, enter the password 0000. Select OK
or Yes to pair with your device.
6. After a successful registration, the voice prompt
“Bluetooth is connected” will be heard and the
LED indicator light will slowly flash BLUE.
Pairing the headphones with a second
Bluetooth enabled device
Bluetooth
Headphones
Answering/ending a call
• To answer a call, quick press the [ ] button.
• To end a call, quick press the [ ] button again.
Pairing the headphones with a Bluetooth
enabled device
If a paired device is in range when the
headphones are turned on, the headphones
will connect to it automatically.
3.5mm
Auxiliary Cord
You can also adjust the volume from your connected
device’s volume control.
1 found
Stop
In the box
Bluetooth Headphones
Scanning
Bluetooth devices
1. [ ] button:
• Long press = power OFF/ON; enter pairing mode
• Quick press = play/pause music; answer/end call
• Double press = redial last number
2. [ + ] button:
• Long press = increase volume
• Quick press = skip to previous song
3. LED indicator light
4. [ - ] button:
• Long press = decrease volume
• Quick press = skip to next song
5. AUX-IN jack
6. Micro USB charging port
SBT559
Adjusting the volume
• To increase the volume, long press the [ + ] button.
• To decrease the volume, long press the [ - ] button.
Device name
SBT559
5
6
User Guide
Powering ON/OFF
• To turn ON, press and HOLD the [ ] button until the
voice prompt “Bluetooth is turned on” is heard.
• To turn OFF, press and HOLD the [ ] button until the
voice prompt “Bluetooth is turned off” is heard.
1. Make sure the headphones are connected to the first
device.
2. Now power the headphones OFF.
3. Press and HOLD the [ ] button for 6 seconds until
the voice prompt “Bluetooth enter pairing mode” is
heard. The LED indicator light will flash RED and BLUE
alternately.
4. Set your second mobile device to search for
Bluetooth devices.
5. When the second mobile device finds the headset,
select SBT559 from the list of found devices.
6. If required, enter the password 0000. Select OK or Yes
to pair.
7. After a successful pairing, turn the headphones OFF,
then turn them ON again. The headphones will
automatically connect to both phones and the voice
prompt “Bluetooth is connected” will be heard.
You can also adjust the volume from your connected
device’s volume control.
Troubleshooting Tips
I can pair the Bluetooth headphones with my
Bluetooth device, but I cannot hear any music.
1. Make sure your Bluetooth device supports A2DP
profile.
2. Turn up the volume on your Bluetooth device.
3. You may have to unpair the headphones, then re-pair
to your device.
I cannot get the Bluetooth headphones into Pairing
mode.
1. Make sure the Bluetooth headphones are turned OFF
before beginning the pairing process.
2. Press and HOLD the [ ] button for 6 seconds until
the voice prompt “Bluetooth enter pairing mode” is
heard and the LED indicator light flashes RED
and BLUE alternately.
4. Check that the headphones are charged.
My Bluetooth Device is not able to pair with the
Bluetooth headphones.
1. Make sure the Bluetooth headphones are turned
OFF before beginning the pairing process.
2. Keep your headphones and Bluetooth enabled
device within 3 feet of each other during the pairing
process.
3. Check that YOUR device’s Bluetooth feature is
turned ON.
4. Try repeating the pairing process. See “Pairing the
headphones with a Bluetooth enabled device”.
Legal information
Caution: Any changes or modifications not expressly
approved could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
Using as wired headphones
1. Connect the one end of the included 3.5mm
Auxiliary Cable to the AUX-IN jack on the
headphones, and the other end of the cable to the
other end to an external device’s headphone jack
(smartphone, tablet, computer, or MP3 player).
2. Open a media player on your device and click on
PLAY to start playing your music.
3. Use the controls on your connected device to
control music playback and volume.
Connecting the audio cable will override
Bluetooth mode. When the cable is
disconnected, the headphones will automatically reconnect to the last paired device.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90) days from
your original date of purchase return it to the authorized
service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
● Call the Customer Support number located below, or go
to our website portal to receive an SRO number.
● Provide proof of the date of purchase within the package
(Dated bill of sale).
● Prepay all shipping costs to the authorized service center,
and remember to insure your return.
● Include a return shipping address (no P.O. Boxes), a
telephone contact number, and the defective unit within
the package.
● Describe the defect or reason you are returning the
product.
Your product will be repaired or replaced, at our option, for
the same or similar model of equal value if examination by
the service center determines this product is defective.
Products received damaged as a result of shipping will
require you to file a claim with the carrier.
The shipping address of the authorized service center is:
 Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
Phone: 1-877-768-8481
Monday-Friday 8AM-10PM(EST)
www.southerntelecom.com
Click on “Product Support”
Warranty service not provided
This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation or operation,
lack of reasonable care, and unauthorized modification. This
warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being
returned to the authorized service center for repair must be
suitably packaged.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of
incidental or consequential damages, or limations on how
long an implied warranty lasts so the above limitations on
exclusions may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that
vary from state to state.
Sharper Image® name and logo are registered trademarks. Manufactured and
marketed by Southern Telecom under license. © Sharper Image. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement