TH-PPE-24 Installation Instructions & Technical Specifications
24” (610mm) Fixed Length Projector Pole Accessory
General Features
Maximum Weight:
454kg (1000lbs)
Pole Compatibility: Colour: Warranty:
1.5” NPT White 10 years
Component Checklist
Pole Connector
HARDWARE
Set Screw
(x4)
Security Screw
(x4)
2.5mm Security
Allen Key
Plastic Cover
Extension Pole IMPORTANT INFORMATION:
! IMPORTANT - Install Telehook Projector Pole as per
installation instruction.
! This product supports a maximum load of 454kg (1000lbs.).
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the component checklist and hardware above.
Step 2. Assembly Technical Specifications
Existing Installation
Thread must be 1.5”
NPT
54mm (2.1”) OD
48mm
(1.9”)
ID
41.8mm
(1.6”)
1.5”NPT
1.5”NPT
39.1mm
(1.5”)
76mm
(3”)
47.3mm
(1.8”)
2.1. When pole & connector are in place, secure by inserting the 4
Standard OR Security Set Screws using the supplied Allen key.
Note: Pole can be installed in reverse orientation.
Extension
Pole
Removable
Plastic Cover
649.6mm
(25.5”)
24”
(609.6mm)
1.5”NPT
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.05.13 ©