JVC | EM32FL | User manual | JVC EM32FL 32" Full HD Black LED TV

JVC EM32FL 32
User Manual
Emerald FT/FL Series LED HDTV
EM32FL
EM39FT
EM55FT
32” Class
39” Class
55” Class
Before operating your LED TV, please read this manual thoroughly.
(*Images shown in this user manual are for illustration purpose only.)
Rev. 03/14
Contents
Congratulations on purchasing your new JVC TV. To get the most out of your JVC LED TV, read these
instructions before making any adjustments, and retain them for future reference.
For assistance, call the JVC Customer Support and Service Center 1-855-868-1928 or visit our website
http://jvc-tv.com/support
We recommend that you register your JVC LED TV either at our website http://jvc-tv.com/support or fill
out and mail the Product Registration Card on the back of the manual.
Retain your purchase receipt and write down the model and serial number located at the back of your
LED TV for easy reference when obtaining service support.
Serial Number:
Model Number:
MHL, Mobile High-Definition Link and the MHL Logo are
trademarks or registered trademarks of the MHL, LLC.
This product qualifies for ENERGY STAR in the
“factory default” setting and this is the setting in which
power savings will be achieved. Changing the factory
default picture setting or enabling other features will
increase power consumption that could exceed the
limits necessary to qualify for Energy Star rating.
®
HIGH-DEFINITION MULTIMEDIA INTERFACE
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. JVC, THE JVC LOGO, AND OTHER
JVC TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF JVC KENWOOD Corporation.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
© Copyrights 2014 AmTRAN Video Corporation. ALL RIGHTS RESERVED.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To Reduce The Risk Of Electric Shock, Do Not Remove Cover (Or Back). No User-Serviceable Parts
Inside. Refer Servicing To Qualified Service Personnel.
The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient
or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect
the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult
the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance,
(example – use only shielded interface cables when connecting to computer or peripheral devices). Any
changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618 USA
Telephone No: 1-855-868-1926
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
2
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
ENGLISH
1)
2)
3)
4)
5)
6)
7)
8)
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such
as vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type
of liquid into the unit.
19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
3
Important Safety Instructions
22) When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious
personal injury. Read the owner’s manual of the other equipment carefully and follow the
instructions when making any connections.
23) Sudden high volume sound may cause hearing or speaker damage. When you use
headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate
level. If you use headphones continuously with high volume sound, it may cause hearing
damage.
24) Do not allow the product to output distorted sound for an extended period of time. It may
cause speaker overheating and fire.
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point
of cable entry as practical.
26) The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use TV
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger TVs are popular purchases. However, TVs are not
always supported on the proper stands or installed according to the manufacturer’s recommendations.
TVs that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and
cause injury.
THIS MANUFACTURER CARES !
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” TV. Care should be
taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious
children.
4
Important Safety Instructions
ENGLISH
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly. When this happens, unit’s
performance will be impaired. To prevent this, let the unit stand in its new surroundings for
about an hour before switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air
conditioner. In such cases, change the location of the unit.
HOW TO HANDLE THE LED PANEL
• Do not press hard or jolt the LED panel. It may cause the LED panel glass to break and injury may
occur.
• If the LED panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may
cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the
liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15
minutes or longer in clean water.
Possible Adverse Effects on LED Panel:
If a fixed (non-moving) pattern remains on the LED Panel for long periods of time, the image can become
permanently engrained in the LED Panel and cause subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is
displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9)
media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal
style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation.
• LED Panels are manufactured using an extremely high level of precision technology, however
sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a
sign of a malfunction.
• Do not install the TV near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as
infrared cordless headphones.
5
Important Safety Instructions
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that
the antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements of the grounding electrode.
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable
system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
6
Important Safety Instructions
ENGLISH
DTV Transition Advisory
As of June 12, 2009, all U.S. television stations have switched to digital broadcasting. As a result,
owners of analog television sets must connect a digital-to-analog converter box to the television
set or subscribe to cable or satellite TV to receive over-the-air TV. Analog-only TVs continue to
work as before to receive low power, Class A or translator television stations and with cable and
satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For more information about the DTV transition, visit www.dtv.gov.
FCC’s Consumer Center
Email: dtvinfo@fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
Fax: 1-866-418-0232; or writing to:
Mail: Federal Communications Commission
Consumer and Governmental Affairs Bureau
Consumer Inquiries and Complaints Division
445 12th Street, SW
Washington, DC 20554
7
Contents
Contents
Contents.......................................................1
Important Safety Instructions.....................3
Television Antenna Connection Protection.... 6
External Television Antenna Grounding..... 6
DTV Transition Advisory......................................... 7
Contents.......................................................8
Attaching the Stand...................................10
Unpacking the TV...................................................10
Removing the Stand..............................................10
EM32FL.................................................................10
EM39FT.................................................................10
EM55FT.................................................................10
Package Contents..................................... 11
Remote Control Batteries......................... 11
Parts and Functions..................................12
Front Views................................................................12
Rear View...................................................................12
EM32FL.................................................................12
EM39FT.................................................................12
EM55FT.................................................................13
Remote Control.......................................................14
Making Connections.................................15
Connecting Antenna / Cable..............................15
Connecting HD Devices.......................................15
Connecting External Speakers / Soundbar /
AV Receivers.............................................................16
Digital Connection...........................................16
Basic Operations.......................................17
Setup Wizard............................................................17
Exit Store Demo.................................................18
Basic TV Operation.................................................18
One button operation (Note:EM32FL and
EM39FT only)..........................................................18
Changing Channel............................................19
Mute Volume......................................................20
Set Sleep Timer..................................................20
Display Info.........................................................20
Set Aspect Ratio................................................20
Selecting Input Source.........................................21
Multimedia Mode...................................................21
8
Playing Multimedia Files................................21
Multimedia: Photo............................................22
Audio Only Mode....................................................22
Wall Mount................................................................23
Installing Wall Mount............................................23
Wall Mount Specifications (VESA).....................23
Adjusting the Menu Settings....................24
Menu Operation......................................................24
Input Menu...............................................................25
Picture Menu............................................................25
Picture Mode......................................................25
Backlight..............................................................25
Contrast................................................................25
Brightness............................................................25
Color......................................................................25
Tint.........................................................................25
Sharpness............................................................26
Size & Position....................................................26
Color Temperature............................................26
Advanced Picture..............................................26
Reset Picture Mode..........................................26
Audio Menu..............................................................26
Bass........................................................................26
Treble.....................................................................26
Balance.................................................................26
Lip Sync................................................................27
TV Speakers.........................................................27
Audio Only...........................................................27
Digital Audio Out..............................................27
Equalizer Settings.............................................27
Reset Audio Mode............................................27
Setup Menu..............................................................27
Name Input.........................................................27
CEC Settings........................................................28
Menu Language................................................28
Time & Local Settings......................................28
Parental Control.................................................28
Setup Wizard.......................................................29
System Information..........................................29
Reset All Settings..............................................29
Closed Caption........................................................30
Wide.............................................................................30
Channel Menu.........................................................31
Select Antenna / Cable...................................31
Scan Channels....................................................31
Contents
ENGLISH
Add Channel.......................................................32
Delete Channel..................................................32
Sleep Timer...............................................................32
Appendix....................................................33
Supported Resolution...........................................33
Troubleshooting........................................34
Specifications............................................35
Limited Warranty.......................................36
ON PARTS AND LABOR....................................36
Parts and Labor..................................................36
Type of Service...................................................36
Limitations and Exclusions............................36
Personal Data.....................................................37
Important Open Source Software Notice.37
Third Party Application Notice.....................37
9
Attaching the Stand
The stand installation varies depending on
model. Perform the installation according to the
instructions of your TV model.
Unpacking the TV
1 Remove TV accessories and protective foam.
2 Remove TV from the box and place it on a flat
and clean surface with TV screen facing down.
3 Attach the stand to TV using the provided
screw.
EM32FL
EM39FT
EM55FT
10
Removing the Stand
When the TV needs to be transported, remove
the stand and pack the TV back in the carton.
To remove the stand, perform the assemble
steps in reverse order according to your TV
model.
Package Contents
Remote Control
LED TV
ENGLISH
Check if the following items are included in your package.
Batteries
SLEEP
MEDIA
I
MENU
IN
FO
UT
NP
W
N
OK
ID
E
RE
TU
R
A U D IO
VOL
CH
MUTE
1
2
4
5
7
8
9
_
0
ENT
3
6
HDMI
PC
TV
VIDEO
COMP
MUSIC
Quick Start Guide
Power Cord
Quick
GuideStart
DOWNLOAD FULL VERSION USER MANUAL
http://jvc-tv.com/support
Remote Control Batteries
1
2
Push the tab, then lift to open the cover.
3
Close the battery cover.
Insert the batteries, making sure the [+] and
[-] polarities are correct.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation
may cause battery leakage or damage the remote control.
Always replace batteries in pair. Do not combine a used
battery with a new one.
Do not use different battery types together
(e.g. “Alkaline” and “Carbon-zinc”).
If the remote control is not to be used for a long period of
time, remove the batteries to prevent battery leakage.
11
Parts and Functions
Front View
Power indicator
Remote control IR receiver
Rear View
EM32FL
EM39FT
(*MHL port does not charge
when TV is OFF.)
Power / Multi-Function Button Operation:
• Press the button to show Quick Control Menu and switch between options
• Press and hold the button to select highlighted option
• To power off TV, press and hold the button while Quick Control Menu is not on screen
12
ENGLISH
EM55FT
(*MHL port does not charge
when TV is OFF.)
13
Parts and Functions
Remote Control
14
1
12
2
13
SLEEP
3
14
MEDIA
15
MENU
4
I
IN
FO
UT
NP
16
17
OK
18
5
W
N
1 IR Transmitter: Sends remote control signal to
the TV.
2 SLEEP button: Select a sleep mode timer (Off,
30 minutes, 60 minutes, 90 minutes, 120 minutes,
180 minutes).
3 Playback controls: The buttons are used for
Photo, Music, Video, and HDMI CEC function.
4 INPUT button: Change the input source.
5 WIDE button: Change the display mode
(Normal, Wide, Zoom Panoramic).
6 MUTE button: Turn the TV audio off or on.
7 VOL (Volume) buttons: Press VOL to
increase volume or VOL to decrease volume.
8 Number pad (0~9, –): Use the number keys to
directly change channel.
9 HDMI button: Press to directly set HDMI as the
input source signal.
10 VIDEO button: Press to directly set Composite
VIDEO as the input source signal.
11 COMP button: Press to directly set Component
as the input source signal.
12 Remote Control LED: Lights red when a
button is pressed.
13 POWER button: Turn the TV on or off.
14 MEDIA button: Enter USB media mode.
15 MENU button: Display the MENU screen.
16 INFO button: Display program information (if
available).
/
/
/ :
17 Direction buttons
Navigate the menu, select options, or adjust
settings value.
18 OK button: Enter a menu or confirm an option.
19 RETURN button: Return to a previous menu or
screen.
20 AUDIO button: Enter Audio Only mode and
turn the screen off. See page 24.
21 CH (Channel) buttons: Use CH to
increase the channel number or CH
to
decrease the channel number.
22 ENT (Enter) button: Access the entered
channel number or display the Channel list screen.
23 TV button: Directly set TV as the input source
signal.
24 PC button: Directly set PC as the input source
signal (This function is only available to models
with VGA input)
25 MUSIC button: Directly set Music as the input
source signal.
ID
E
6
7
RE
TU
R
A U D IO
VOL
19
20
CH
21
MUTE
8
1
2
3
4
5
6
7
8
9
_
0
ENT
22
23
9
HDMI
PC
TV
10
VIDEO
COMP
MUSIC
11
24
25
Notes:
To obtain best results, use the remote control with a proper
distance from the TV and ensure that there are no obstacles
between them.
Aim the remote control transmitter to the remote control
sensor on the TV.
Do not expose the remote control to direct sunlight. This
may affect the performance of the remote control.
Making Connections
ENGLISH
Connecting Antenna / Cable
Connect the 75 ohm coaxial cable directly to the DTV/TV Cable/Antenna jack of the TV.
DTV / TV
CABLE / ANTENNA
75 ohm coaxial cable
Connecting HD Devices
You can connect different devices to the TV using HDMI, Composite, or Component connections.
Check the type of connection available on your device.
15
Making Connections
Connecting External Speakers / Soundbar / AV Receivers
Digital Connection
Connect the SPDIF/Optical audio cable to the Audio OUT optical port of the TV and the optical
port of the soundbar, AV receiver, or audio system.
Digital Audio System
TV
AUDIO OUT
Audio OUT
Audio IN
OPTICAL
OPTICAL
Optical audio cable
Note:
• The optical audio cable is not included with the TV.
Connecting Music Port
The TV supports music playback from portable music players, such as an MP3 player or iPodTM.
16
Setup Wizard
4
The Setup Wizard will assist you with setting up
your TV for the first time. Please follow the
instruction carefully.
Press or to select the Time Zone, then press
OK.
Time Zone
Select the Time Zone
Note: If you would like to setup over-the-air or cable
programming, make sure the antenna or cable TV system is
connected. See page 14 for setup.
1
2
Time Zone:
Alaska
When you turn on the TV for the first time, the
Setup Wizard screen will appear.
Press or to select the menu language, then
press OK.
Change
5
OK Select
RETURN Previous Setup
INFO Exit
Press or to set Daylight Saving Time “ON” or
“OFF”, then press OK.
Menu Language
Language Selection
Language:
Daylight Saving
English
Daylight Saving Selection.
Daylight Saving:
Change
3
OK Select
Off
INFO Exit
Press or to select the TV Mode, then press
OK.
TV Mode options :
• Home Use: Select this mode for in home
use.
Change
6
OK Select
RETURN Previous Setup
INFO Exit
Press or to select the TV service, then press
OK.
• Store Demo: Select this mode for in
store demo.
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
Note:
• Store Demo is for retailers only.
Cable
Signal Type:
• To exit Store Demo, see page 18.
Start Scan
Move
Change
OK Select
RETURN Previous Setup
INFO Exit
17
ENGLISH
Basic Operations
Basic Operations
7
Exit Store Demo
Press OK to start channel scan.
1
2
Scanning
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Press RETURN.
Press or to select “OK”, then press OK to
confirm.
Scan Status:
0%
Analog Channel:
Digital Channel:
0
0
Do you wish to exit Retail Mode?
Stop Scan
OK
Cancel
OK Select
Basic TV Operation
Note:
• Scanning may take some time to complete.
• Select Stop Scan to cancel the auto scan at anytime.
8
When auto scan is complete, press OK to
continue.
Scan Finish
One button operation
(Note:EM32FL and EM39FT only)
The TV power button also serves as multi-function
button for input select, TV channel and volume
control
• Press the button to show Quick Control Menu and
switch between options
Channel scan completed.
Analog Channels:
Digital Channels:
• Press and hold the button to select highlighted
option
12
26
• To power off TV, press and hold the button while
OK
Quick Control Menu is not on screen
OK Select
9
RETURN Previous Setup
INFO Exit
Press OK to complete setup.
Finish
Initial Setup has finished, please press "OK" to
exit Setup Wizard.
OK
OK Select
18
RETURN Previous Setup
INFO Exit
Basic Operations
ENGLISH
Changing Channel
Press the number buttons to directly select
channels.
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press ENT after pressing
the number buttons.
To Browse Channel
Press the Channel up/down buttons on the remote
control.
CH
Press to scroll through the
channels manually.
To Select Analog Channels
1~9
Press 1~9 as needed. Example, to select channel 2, press 2, then
press ENT.
10~99
Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
100~135:
Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
19
Basic Operations
To Select Digital Channels
Press the first 3 digits, then press _ , followed by
the remaining number. Example, to select channel
15-1, press 1, 5, _ , 1, then press ENT.
To Select by Channel List
All channels found from channel scan are listed on
the Channel List screen. You can select channels
from this screen.
1
2
3
Press ENT to display the Channel List screen.
Press
or
to select a channel number,
then press ENT.
Press RETURN to close the Channel List
screen.
Mute Volume
Press MUTE to turn the sound off. To turn the
sound back on, press MUTE again or any of the
VOL buttons.
Set Sleep Timer
Sleep timer sets the TV to automatically turn off
after a preset amount of time. After setting a preset
amount of time, the TV will automatically turn off
after the timer has expired.
1
2
Press SLEEP to display the Sleep screen.
Press SLEEP repeatedly or press
or
to
scroll through the options, then press OK.
To cancel sleep, set the timer to Off.
Display Info
Press INFO to display the channel or input
information on the screen.
Press INFO again to hide the Info screen.
Set Aspect Ratio
1
2
Press WIDE to display the Wide menu.
Press WIDE repeatedly or press
or
to
scroll through the options, then press OK.
Normal
When watching a 4:3 content,
the TV displays a standard
picture with black side bars.
When viewing a 16:9 content,
it displays a full picture.
Wide
When displaying a 4:3
content, the picture is
stretched horizontally to fill
the width of the screen. When
watching a 16:9 content, the
image is slightly overscan.
Zoom
The entire picture is uniformly
enlarged to retain its original
proportion. However, some
parts of the picture may be
hidden.
Panoramic
The picture is stretched
horizontally on the left and
right sides to fill the width of
the screen. The center of the
picture is not stretched.
Stretch
The picture is stretched
horizontally on the left and
right sides.
Note:
• Panoramic mode is only available on 4:3 contents.
• Stretch is only available on 16:9 contents.
20
Aspect Ratio options in PC mode.
Normal
When watching a 4:3 content, the TV displays
SLEEP
a standard picture
with black side bars. When
viewing a 16:9 content, it displays the full
picture, pixel to pixel.
Multimedia Mode
The TV Allows you to play image slide shows from a
USB memory stick.
Note:
• Only supported multimedia files can be played back.
MEDIA
MENU
Playing Multimedia Files
1
Insert the USB memory stick into the USB slot
of the TV.
Take note of the correct direction.
Do not force the device into the slot.
TV
(side panel)
W
N
USB
I
IN
FO
Stretch
When watching a 4:3 content, the picture is
stretched hozontally to fill the width of the
screen. When watching a 16:9 content, the
picture is stretched Horizontally on the left
OK
and right sides.
UT
NP
ID
E
TU
R
Selecting Input Source
RE
A U D IO
The TV provides various ways to select the
input source:
VOL
2
CH
A message box will appear on the screen.
Press or to select OK.
MUTE
On the Remote Control
• Press INPUT repeatedly to scroll through
the input source
1 options,
2 then 3press OK
to select the input.
• To directly select
4 an input
5 source,
6 press
the direct input button located at the
bottom of the remote control.
7
8
9
_
0
ENT
HDMI
PC
TV
VIDEO
COMP
MUSIC
USB media detected. Enter multimedia
menu?
OK
3
4
5
Cancel
Press OK to select your option.
Press
or
press OK.
to select the USB source, then
If prompted, press
or
player, then press OK.
to select Photo
21
ENGLISH
Basic Operations
Basic Operations
6
The displayed screen varies depending on the media type you selected.
Press
,
,
or
to select a file or function, then press OK.
Multimedia: Photo
PATH:/MMP/Photo/
Photo
File Name: P1130130
Resolution: 768x1024
Size:
113KB
..
P1130130
P1130131
P1130132
P1130133
P1130134
P1130136
P1130137
1
2
3
Start Slideshow
Sort:
Newest First
View:
Thumbnails
Setting
4
P1130135
Page 1 of 7
1 Start Slideshow button: Play slide show.
2 Sort button: Change sorting order. The label on this button varies depending on the
current sorting order. (Name A-Z, Name Z-A, Newest First, Oldest First)
3 View button: Change view mode. The button label varies depending on the current view.
(Folders, Thumbnails)
4 Setting button: Change slide show settings.
Audio Only Mode
While watching TV or playing music, you can set the TV to Audio Only mode to turn off the TV display and
save power.
1
2
22
Press AUDIO to activate Audio Only mode. A message appears on the screen, then after a few
seconds, the TV display turns off.
Press any button to turn on the display again and exit Audio Only mode.
Wall Mount
Installing Wall Mount
The wall mount kit allows you to mount the TV on the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount kit.
Note: The wall mount kit is not included with the product.
For product protection and safety reasons, JVC strongly recommends contacting a technician or professional for assistance installing the wall mount and setting up the TV. If you
decide to install the wall mount and TV without the assistance of a technician or professional, JVC will not be responsible for any damage to the product or injury to yourself or
others.
Do not install your wall mount while your TV is turned on. It can result in personal injury
due to electric shock
1 Disconnect all cables connected to the TV.
2 Carefully place the TV on a flat and clean surface with screen facing down. It is
recommended to place the TV cover or protection sheet between the TV and flat
surface.
3 Remove the screw attaching the stand and TV.
4 Remove and store the stand for future use.
Wall Mount Specifications (VESA)
Product Model #
VESA hole pattern (mm)
Standard Screw
EM32FL (32”)
100 x 100
M4
EM39FT (39”)
100 x 100
M4
EM55FT (55”)
400 x 400
M8
23
ENGLISH
Basic Operations
Adjusting the Menu Settings
Menu Operation
Options or submenu
Main Menu
*Input sources menu varies depending on model.
Remote Control
1
Display the menu.
Press MENU.
2
Select a menu option.
or
to select a menu or option.
1. Press
2. Press OK or to enter a menu or confirm
an option.
Adjust or select the
setting.
or
to select an option. Or,
1. Press
press or to adjust a setting, such as
Brightness.
3
2. Press OK to apply the settings.
4
24
Exit the menu.
To exit the menu, press RETURN. Or, to
return to a previous screen one at a time,
press MENU or .
Adjusting the Menu Settings
ENGLISH
Input Menu
Select the input source signal.
• TV: To watch analog or digital TV channels.
• Video: To use VCRs, camcorders, or game consoles connected via
composite connection.
• Component: To use VCRs, camcorders, or game consoles connected via
component connection.
• HDMI-1 : To connect HD devices via HDMI Connection.
• HDMI/MHL: To connect MHL devices via HDMI/MHL Connection.
• Music: To play music from a music player connected via music port.
Picture Menu
Adjust picture options such as Brightness, contrast, and advanced picture settings.
Picture Mode
Select the picture mode.
Custom
Standard
Movie
Game
Vivid
Sport
For custom picture settings.
For standard picture settings.
For moving pictures such as movies.
For fast and dynamic pictures suitable with playing
games.
For bright and vivid picture settings.
Suggested settings for sporting events.
Backlight
Adjust the backlight that affects the overall brilliance of the picture. (0 ~100)
Contrast
Adjust the white level in the picture. Low contrast makes pictures look dark, high contrast makes
pictures washed out. (0 ~100)
Brightness
Adjust the brightness setting. (0 ~100)
Color
Adjust the amount of color level in the picture. (0 ~100)
Tint
Adjust the picture hue. (-50 ~ 50)
25
Adjusting the Menu Settings
Sharpness
Adjust the sharpness of the edges of elements in the picture.
Size & Position
Horiz. Position / Vertical Position
Horizontal Size / Vertical Size
Adjust the horizontal / vertical position of the picture.
Adjust the horizontal / vertical size of the picture.
Color Temperature
Color Temperature
Red / Green / Blue Gain
Red / Green / Blue Offset
Reset Color Temperature
Apply a preset color temperature setting.
(Custom / Cool / Natural / Warm)
Adjust the red / green / blue gain settings according to your
preference.
Adjust the red / green / blue offset settings according to your
preference.
Reset the color temperature to default settings.
Advanced Picture(*May be unavailable on certain models.)
CrystalColor
Dynamic Contrast
Adaptive Backlight
Noise Reduction
Digital NR
Film Mode
CrystalColor produces more vivid and crisp color
pictures. (Off / Normal / Rich)
Dynamic contrast automatically enhances the
image for greater picture details.
Enable or disable adaptive backlight. (Off / On)
Reduce the noise level.
(Off / Low / Medium / High)
Reduce noise level of digital signals.
(Off / Low / Medium / High)
Produce smoother motion picture when viewing
movies .
Reset Picture Mode
Reset the picture mode settings to default.
Audio Menu
Bass
Adjust the bass level to your preference. (-12 ~ 12)
Treble
Adjust the treble level to your preference. (-12 ~ 12)
Balance
Adjust the audio level of the L/R channels of the speakers to your preference. (-10 ~ 10)
26
Adjusting the Menu Settings
ENGLISH
Lip Sync
Adjust to match the movements and the lips of the person talking on the
screen. (0 ~ 5)
TV Speakers
Turn the internal speakers on or off.
Audio Only
Output audio from the TV speakers but turn off the TV display. See page
24.
Digital Audio Out
Select the type of digital audio output. (Off / Dolby Digital / PCM)
Equalizer Settings
Adjust the equalizer settings. (120Hz / 500Hz / 1.5KHz / 5KHz / 10KHz)
Reset Audio Mode
Reset the audio mode settings to default settings.
Setup Menu
Name Input
The Name Input feature of the TV allows you to add a label name on an input source.
To label an input source , perform the following steps:
1
2
3
4
5
6
Press MENU.
Press
or
to select “Setup”, then press or OK.
Press
or
to select “Name Input”, then press or OK.
Press
or
to select “Input Source”, then press or OK.
Press
or
to select the input source that you want to add
a label name to, then press OK.
To select a custom label:
1. Press
or
to select “Input Labels”,
then press or OK.
2. Press
or
to select “Custom” and press OK.
To enter desired label:
or
to select the text box, then press OK.
1. Press
2. Press
,
, or to select a character, then press OK.
3. Press
,
, or to select “OK”, then press OK.
Input Source
Component
Input Labels
Custom
My Input
Press RETURN to close the menu screen.
27
Adjusting the Menu Settings
CEC Settings
CEC allows you to control devices using your TV remote control when the CEC devices are
connected via HDMI.
Enable or disable CEC function.
CEC Function
Device Search
If CEC Function is enabled, select to search for CEC devices.
System Audio Control Connect to your device though Audio Return Channel-enabled HDMI Port (HDMI 1)
Menu Language
Select the on-screen menu language.
Time & Local Settings
Time Zone
Daylight Saving
Select a location to apply the time zone.
Enable or disable daylight saving time.
Parental Control
The Parental Control feature allows you to control and restrict TV programs by Channel Lock , TV
Rating, or Movie Rating.
Access Parental Control Menu
The Parental Control menu requires you to enter the password to access its submenu.
1
2
3
4
Press MENU.
Press
or
to select “Setup”, then press or OK.
Press
or
to select “Parental Control”, then press or OK.
Enter the 4-digit password. Press
options.
or
,
to select “OK”, then press OK to access the submenu
Please enter password.
OK
Cancel
Note: The default password is “0000”.
5
Press
or
to select the submenu options, then press
or OK to enter the submenu.
Restrict By Channel
Use the Channel Lock feature to restrict viewing a specified channel. Once locked channel is selected, the
TV displays a blank screen.
1
2
28
In the “Parental Control” menu, press
Press
or
or
to select “Channel Lock”, then press or OK.
to highlight a channel that you want to lock.
Adjusting the Menu Settings
Press OK to mark and lock the channel.
Enable Rating
Press to return to the previous screen or press RETURN to close the
menu screen.
Channel Lock
Restrict By TV/Movie Rating
You can select which TV/Movie rating to lock for viewing.
1
In the “Parental Control” menu, press
or
to select a rating
submenu, then press or OK.
• “Enable Rating”: Select “On” to enable rating.
• “USA-TV”: Set the rating by age level and genre.
• “USA-Movie”: Set by USA movie rating standards.
• “CAN-English”: Set by Canadian English movie rating standards.
Off
ENGLISH
3
4
USA-TV
USA-Movie
CAN-English
CAN-French
Alt. Region Rating
Block Unrated Shows
Off
New Password
Reset Parental Settings
• “CAN-French”: Set by Canadian French movie rating standards.
• “Block Unrated Shows”: Select “On” to block unrated shows.
2
3
Press
or
, then press OK to select the rating.
Press to return to the previous screen or press RETURN to close the menu screen.
Change Password
1
2
3
In the “Parental Control” menu, press
or
to select “Change Password”, then press or OK.
Enter a new password, then press OK.
Re-enter the new password, then press OK to complete.
Power Indicator
To turn on/off the LED power indicator while TV is on.
Setup Wizard
Run the guided setup.
System Information
Display the system information of the TV.
Reset All Settings
Reset all TV settings to default settings.
29
Picture
Adjusting the Menu Settings
Closed Caption
Audio
Setup
Closed Caption decodes and displays closed caption data of television programs
as subtitle. This feature displays text on the screen or it translates and displays text
PIP
in another language.
1
2
3
Press MENU.
Press
or
Analog Closed Caption
Off
Digital Closed Caption
Off
Closed Caption
to select “Closed Caption”, then press or OK.
Press
or
to select “Analog Closed Caption” or
“Digital Closed Caption, then press or OK.
Digital CC Options
Wide
Note: Either “Analog Closed Caption” or “Digital Closed Caption” is available
depending on your TV service.
Channel
4
5
Press
or
to select a closed caption type or select “Off” to disable this
feature, then press OK.
For digital closed caption, you can select closed caption options, such as text
or
to select “Digital CC Options”, then press
size and text color. Press
OK. Select desired options.
Press RETURN to close the menu screen.
Wide
Select WIDE to change TV viewing aspect ratio.
1
2
3
Press MENU.
Press
or
to select “Wide”, then press or OK.
Press
or
to select “Normal” or “Wide”,
“Zoom”, “ Panoramic“
Note: refer to Basic Operation section for details.
30
Audio
Channel Menu
Select Antenna / Cable
PIP
ENGLISH
Adjusting the Menu Settings
Setup
Select Antenna or Cable for the service connected to your TV.
1
2
3
4
Closed Caption
Press MENU.
TV Mode
Cable
Auto Channel Scan
Press
or
to select “Channel”, then press or OK.
Partial Channel Scan
Press
or
to select “TV Mode”, then press or OK.
Find Channel
Press
or
to select “Antenna” or “Cable”, then press
OK.
Channel
Channel Management
Wide
Digital MTS
English
Scan Channels
Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly. See page 14.
1
2
3
Press MENU.
Press
or
to select “Auto Channel Scan”, then press or OK.
Press
or
to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press
OK.
Note: Auto scan may take 15 to 30 minutes to find available channels.
31
Partial Scan Channels
You can partially scan for network signal within a specified range of channels.
1
2
3
4
Press MENU.
Press
or
to select “Partial Channel Scan”, then press or OK.
Press
or
to select “Scan Mode”, then press or OK.
Press
or
to select an option, then press OK.
• “Analog/Digital”: scan for both analog and digital channels
• “Analog”: scan for analog channels
• “Digital”: scan for digital channels
5
6
7
Press
or
to select “From Channel”, then enter a starting channel range.
Press
or
to select “To Channel”, then enter an ending channel range.
Press
or
to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1
2
3
4
5
Press MENU.
Press
or
to select “Channel”, then press or OK.
Press
or
to select “Find Channel”, then press or OK.
Press
or
to select “Enter Channel”, then enter a channel.
Press
to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1
2
3
4
5
Press MENU.
Press
or
to select “Channel”, then press or OK.
Press
or
to select “Channel Management”, then press or OK.
Press
or
, then press OK to mark the channels that you want to remove from the
Channel List.
Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time.
32
Appendix
Model Name
EM32FL/EM39FT/EM55FT
Supported PC Timing
(HDMI)
640 x 480 @ 60, 75Hz
ENGLISH
Supported Resolution
720 x 400 @ 70Hz
800 x 600 @ 60, 75Hz
1024 x 768 @ 60, 75Hz
1920 x 1080 @ 60Hz
Supported Video Timing (NTSC, Composite)
480i
Supported Video Timing
(ATSC, Composite, HDMI)
480i, 480p, 720p, 1080i, 1080p
33
Troubleshooting
If your TV fails to work properly, check the following guidelines for possible causes and solutions.
Consult your local dealer or service outlet if problems persist.
Problem
No power.
Solution
• Make sure the power cord is plugged in.
• The power is off, press the Power button to turn on the TV.
• Try another outlet.
Poor sound or no sound.
• Unplug the unit for an hour, then plug it back in.
• Press the VOL button on the remote control or the Power/Multi
Function button on the TV to adjust volume .
• Press MUTE on the remote control to ensure that mute is not on.
• The channel or cable TV is experiencing problems, tune to
another channel.
• Check the TV audio settings.
Poor picture or no picture.
• Check for possible sources of interference.
• The channel or cable TV is experiencing problems, tune to
another channel.
• Make sure that channels are set into memory.
• Check the antenna or cable TV connections.
Poor reception on some
channels.
• Check for possible sources of interference.
• The channel or cable TV is experiencing problems, tune to
another channel.
• Make sure that channels are set into memory.
• The network signal is weak, adjust the antenna to receive better
reception.
The remote control does
not work.
• Check for possible sources of interference.
• Batteries may be weak, dead, or inserted incorrectly.
• Point the remote control directly at the remote sensor on the TV
with an angle of 35º.
• Remove any obstacles between the remote control and the TV.
TV shuts off.
• Remote control is out of range, move closer to the TV.
• Sleep timer is set.
No CATV reception.
• Power is interrupted.
• Check all cable TV connections.
Closed caption is not
activated.
34
• Set the TV Mode in Channel menu.
• The program tuned is not closed captioned. Try another channel.
• Enable Closed Caption in the menu.
Specifications
Display Specifi
cation:
Size Class (Diagonal):
Resolution / Aspect:
Backlit:
Refresh Rate / Frame Rate:
Contrast Ration:
TV Features
Color Enhancement:
Tuner:
PIP / POP:
Close Caption:
Parental Control:
g
g
(EPG):
Picture Modes:
Audio
Audio Technology:
EM32FL
EM39FT
EM55FT
32” (actual viewable
size: 31.5”)
1920 x 1080 / 16:9
DLED
60Hz
1200:1
39” (actual viewable
size: 38.5”)
1920 x 1080 / 16:9
DLED
60Hz
5000:1
55” (actual
viewablesize: 54.6”)
1920 x 1080 / 16:9
DLED
CM120Hz
1200:1
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
MTS Stereo Decoder,
Dolby Digital Decoder
(5.1 Ch Pass Through)
Yes
10 Watts x 2
MTS Stereo Decoder,
Dolby Digital Decoder
(5.1 Ch Pass Through)
Yes
10 Watts x 2
MTS Stereo Decoder,
Dolby Digital Decoder
(5.1 Ch Pass Through)
Yes
15 Watts x 2
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes, Energy Star 6.0
Yes
Yes, Energy Star 6.0
Yes
Yes, Energy Star 6.0
1
2 (one port for MHL)
1(
share with component
0
1
1
1
2 (one port for MHL)
1(
share with component
0
1
1
1
3 (one port for MHL)
1(
share with component
0
1
1
Graphic Equalizer:
Speaker Output Power:
Convenience Features
Ambient Sensor:
Interactive Setup Guide:
Input Port Naming:
Audio Only Mode:
HDMI-ARC:
HDMI-CEC:
USB Multimedia:
Remote:
Energy Saving Features
Auto Power OFF (DPMS):
Energy Star:
Input / Output
Input:
Antenna In:
HDMI:
Component:
Composite (RCA):
VGA / RGB:
Music Port:
USB:
Output:
Optical Digital Audio Out:
Stereo Audio Out:
Mechanical
Wall Mount Pattern:
Without Stand (WxHxD) and Weight
(Approx.):
1
1
1
1
1
1
100mm x 100mm
28.4” x 16.9” x 2.4“ /
10.1 lbs
100mm x 100mm
34.6” x 20.3” x 2.5“ /
12.3 lbs
400mm x 400mm
48.8” x 28.5” x 2.7“ /
38.6 lbs
With Stand (WxHxE) and Weight
(Approx.):
28.4” x 18.7” x 5.9” /
10.8 lbs
34.6” x 22.3” x 7.7” /
13.1 lbs
48.8” x 30.2” x 11“ /
43.9 lbs
ENGLISH
Specifications are subject to change without prior notice.
35
ON PARTS AND LABOR
Limited Warranty
This Limited Warranty covers units that are purchased as new and in the United States Only. This Product is manufactured,
distributed, and warranted by AmTRAN Video Corporation (hereinafter known as “Warrantor”) under brand license by JVC
KENWOOD Corporation. The Warrantor provides a warranty to the original purchaser of a new Product against defects in
materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be defective within the warranty period, the Warrantor will either repair or
replace the Product at its sole option and discretion.
To obtain warranty service, contact our Technical Support:
Visit the Web Site: http://jvc-tv.com/support
Or call our Customer Support and Service Center
1-855-868-1928
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A DESIGNATED SERVICE CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty
period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or
recertified at the Warrantor’s option and sole discretion. Replacement parts and Products are warranted for the remaining
portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is longer.
Type of Service
Defective Products must be sent to the designated service center to obtain warranty service. The Warrantor is not responsible
for the transportation costs to the service center, but will cover the costs for return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A DESIGNATED SERVICE CENTER FOR WARRANTY
SERVICE.
Product returned to designated service centers must utilize either the original carton box and shipping material or packaging
that affords an equal degree of protection. Technical Support will provide instructions for packing and shipping the covered
Product to the designated service center.
Limitations and Exclusions
The Warrantor’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover
product issues caused by any other reason, including but not limited to cosmetic damage, normal wear and tear, improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer
misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than
by an authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are
not covered. This one year limited warranty does not cover Products that are sold “AS IS”, “Open Box”, “FACTORY RECERTIFIED”,
or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. THE WARRANTOR’S TOTAL LIABILITY FOR ANY AND ALL LOSSES
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGE, OR
DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE
PRICE OF THE PRODUCT. THE WARRANTOR SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
36
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY
IS SUBJECT TO CHANGE WITHOUT NOTICE. CHECK HTTP://JVC-TV.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your Product is capable of storing personal data and other information, all contents and information will be deleted in the
course of some in-home and all ship-in warranty service. If this occurs, your product will be restored to you configured as
originally purchased. You will be responsible for restoring all applicable data and passwords. Recovery and reinstallation of
user data is not covered under this Limited Warranty. In order to protect your personal information, we recommends that you
always clear all personal information from the unit before it is serviced, regardless of the servicer.
Important Open Source Software Notice
Some JVC device may contain free software which is based on the license granted under the GNU General Public License
and Lesser General Public License (hereinafter “GPL/LPGL”) that are subject to the GPL2.0/LGPL2.1 You may use, modify, or
distribute only if you agree to all of the terms and conditions of the GPL/LGPL. For more details on the list of JVC devices with
open source software, please visit http://jvc-tv.com/support
Please note that any software component developed or created independently by AmTRAN Video Corporation shall not be
subject to “GPL/LGPL” requirement for provision of the source code. Users are urged to read the details for the relevant license
carefully before using the software component covered by “GPL/LGPL.”
You can obtain a copy of the GPL/LGPL license from http://www.gnu.org/licenses/gpl and http://www.gnu.org/licenses/lgpl.
For details of any open source software on your JVC device, please visit the following web site:
http://jvc-tv.com/support
Please note that we are unable to answer any inquiry relating to the contents, etc of the source code.
Permission is hereby granted, free of charge, to any person obtaining a copy of any such software and associated
documentation files (the “Open Source Software”), to deal in the Open Source Software without restriction including without
limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Open Source
Software, and to permit persons to whom the Open Source Software is furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT, IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
Third Party Application Notice
You may encounter third-party applications (including links to websites, widgets, software or other software utilities
(“Applications”) that interact with the Product. Such Applications are owned and operated by third parties that are not
related to or sponsored by us. Use of an Application through the Product is at your own option and risk. We do not endorse
any included third-party Applications or third-party products or services. Your use of included Applications is subject to the
terms of use and privacy policy of the Application provider.
AmTRAN Video Corporation, PO Box 50427 Irvine, CA 92619
37
ENGLISH
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
Do not send product or other
correspondence to this address
Attn: Product Registration
P.O. BOX 50427
IRVINE, CA 92619
Place
Stamp
Here
Register Online: http://jvc-tv.com/support
First Name
Last Name
Address
Apt. #
City
State
Zip Code
Phone Number
E-mail Address
Model Number
Serial Number
Dealer Name
Purchase Price
Date of Purchase
Comments
I would like to receive the JVC Community e-mail newsletter
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising