ONKYO DV-CP704 Instruction manual

Contents
DVD Changer
Overview ..............................................2
DV-CP704
Instruction Manual
Connections ......................................17
Getting Started and Setting up ........22
Basic Playback ..................................23
Thank you for purchasing an Onkyo DV-CP704
DVD Changer. Read this manual carefully
before using your new DVD Changer. A good
understanding of its features and operation will
allow you to achieve optimum performance and
enjoyment.
Playback Techniques ........................34
Keep this manual for future reference.
Detailed Settings ...............................42
Miscellaneous information ...............49
En
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
2
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, PORTABLE CART WARNING
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
S3125A
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in
any way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of
this unit.
17. Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides and
10 cm (4") at the rear. The rear edge of the shelf or
board above the apparatus shall be set 10 cm (4")
away from the rear panel or wall, creating a flue-like
gap for warm air to escape.
Precautions
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal without the permission of the copyright holder.
2. AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a soft
cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards
with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
5. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
6. Handling Notes
• If you need to transport this unit, use the original
packaging to pack it how it was when you originally bought it.
• Do not leave rubber or plastic items on this unit
for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it may
not work properly the next time you turn it on, so
be sure to use it occasionally.
• When you’ve finished using this unit, remove all
discs and turn off the power.
7. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all
around this unit, especially if it’s installed in an
audio rack. If the ventilation is inadequate, the
unit may overheat, leading to malfunction.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may
rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject
to vibrations from loudspeakers. Never put the
unit on top of, or directly above a loudspeaker.
8.
9.
10.
• Install this unit horizontally. Never use it on its
side or on a sloping surface, because it may cause
a malfunction.
• If you install this unit near a TV, radio, or VCR,
the picture and sound quality may be affected. If
this occurs, move this unit away from the TV,
radio, or VCR.
To Obtain a Clear Picture—This unit is a hightech, precision device. If the lens on the optical
pickup, or the disc drive mechanism becomes dirty
or worn, the picture quality may be affected. To
maintain the best picture quality, we recommend
regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact
your Onkyo dealer for details.
Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the optical
pickup, one of the most important parts inside this
unit.
• Moisture condensation can occur in the following
situations:
– The unit is moved from a cold place to a warm
place.
– A heater is turned on, or cold air from an air
conditioner is hitting the unit.
– In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibility
of moisture condensation occurring. Doing so
may damage your discs and certain parts inside
this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any condensation will have evaporated.
Region Numbers—The DVD standard uses region
numbers to control how discs can be played around
the world, the world being divided into six regions.
This unit will only play DVD discs that match its
region number, which can be found on its rear panel
(e.g., 1 ,
).
About this Manual—This manual explains how to
use all of this unit’s functions. Although the DVD
standard offers many special features, not all discs
use them all, so depending on the disc being played,
this unit may not respond to certain functions. See
the disc’s sleeve notes for supported features.
ALL
11.
3
Precautions—Continued
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel.
1. This unit is a CLASS 1
LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
Contents
Important Safety Instructions .................. 2
Precautions................................................ 3
Contents..................................................... 5
Introduction ............................................... 6
Supplied Accessories.....................................6
DV-CP704 Features ......................................6
Disc Notes .....................................................7
DV-CP704-related Terminology.................10
Controls & Connectors........................... 11
Front Panel ..................................................11
Display ........................................................12
Rear Panel ...................................................13
Remote Controller .......................................14
Before Using the DV-CP704 ................... 16
Installing the Remote Controller’s
Batteries .................................................16
Using the Remote Controller.......................16
Connecting the DV-CP704...................... 17
Before Making Any Connections................17
AV Cables & Connectors............................17
Connecting Your TV or Projector...............18
Connecting an AV receiver .........................19
Connecting a Stereo Amp ...........................19
Connecting a Component with an HDMI
Input.......................................................20
Connecting
-compatible Components ...21
Advanced Playback.................................34
Repeat Playback ......................................... 34
A–B Repeat Playback ................................. 34
Random Playback ....................................... 35
Memory Playback....................................... 36
Selecting Camera Angles............................ 37
Selecting Languages & Audio Formats...... 38
Selecting Subtitles ...................................... 38
Setting the HDMI ....................................... 39
Using Last Memory .................................... 40
Zooming...................................................... 41
Displaying Information............................... 41
Configuring the DV-CP704......................42
Using the Onscreen Setup Menus............... 43
Picture Menu............................................... 43
Audio Menu ................................................ 45
Language Menu .......................................... 46
Display Menu ............................................. 46
Operating Setting Menu.............................. 47
Initial Setup Menu ...................................... 48
Selecting Other Languages ......................... 48
Language Code List.................................... 48
Troubleshooting ......................................49
Specifications ..........................................52
Powering Up & Setting Up the
DV-CP704....................................... 22
Powering Up the DV-CP704.......................22
First Time Setup ..........................................22
Basic Playback ........................................ 23
Loading & Removing Discs........................23
Loading Discs During Playback..................24
Selecting Discs ............................................24
Starting, Pausing & Stopping Playback ......25
Navigating Disc Menus...............................26
Using the Disc Navigation Window............27
Selecting Titles, Chapters & Tracks by
Number ..................................................28
Locating Specific Points in Time ................29
Fast Forward & Reverse..............................30
Frame-by-Frame Playback ..........................30
Slow-motion Playback ................................31
Adjusting the Display Brightness................31
Using JPEG CDs .........................................32
Using Chain Mode ......................................33
Using Party Mode .......................................33
5
Introduction
Supplied Accessories
Make sure you have the following accessories:
• DVD-R/RW, DVD+R/RW (DVD-Video, MP3/WMA/
JPEG)
• Direct digital path for signal purity
• Vector Linear Shaping Circuitry*4
Video
Remote controller (RC-655DV) & 2 batteries (AA/R6)
AV connecting cable (RCA/phono) (1.5 m)
•
•
•
•
•
•
•
•
•
•
Advanced 108 MHz/14-bit video D/A converter
HDMI*5 digital interface
Component video output
S-Video and composite video outputs
Title, chapter, track, or time search
Last Memory function allows you to resume playback
from a specific point on a DVD-Video disc, even if
that disc has been removed from the DV-CP704
Supports 4:3 and 16:9 aspect ratio TVs
Multiple camera angle support
Parental Lock function
Screen Saver function
Audio
cable (0.8 m)
This cable is used to connect the DV-CP704 to other
(Remote
-compatible Onkyo components for
Interactive) control.
To use
, in addition to an
connection, you must
make an analog audio connection (RCA) between the
DV-CP704 and your Onkyo AV receiver.
•
•
•
•
•
•
Audiophile-class performance
Dynamic Range Control setting
192 kHz/24-bit D/A converter
Coaxial digital output
Optical digital output
Analog output
Others
•
•
•
•
•
Coaxial digital cable (1.0 m)
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operation are the
same regardless of color.
Load discs without stopping playback
Adjustable display brightness
Slow motion playback
Fast forward and reverse
Repeat playback options include: Chapter, Title, 1
Disc, All Discs, Track, and Folder (MP3/WMA)
• Random playback options include: Title, 1 Disc, All
Discs, and Folder (MP3/WMA)
• Supports up to 8 soundtracks/languages
• Supports up to 32 subtitle languages
DV-CP704 Features
Highlights
•
•
•
•
•
•
•
•
•
6
Dolby*1 Digital and DTS Digital Out*2
Holds up to six discs
Chain mode for successive disc playback
Party mode plays discs in random order
DVD-Video playback
Audio CD playback
MP3/WMA*3 playback
JPEG picture display and slideshow
CD-R, CD-RW (Audio CD, MP3/WMA/JPEG)
*1. Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
*2. “DTS” and “DTS Digital Out” are trademarks of DTS, Inc.
*3. Windows Media, and the Windows logo are trademarks, or
registered trademarks of
Microsoft Corporation in the
United States and/or other countries.
*4. VLSC and the VLSC logo are registered trademarks of Onkyo
Corporation.
*5. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
Introduction—Continued
Disc Notes
Supported Discs
The DV-CP704 supports the following discs.
Disc
Logo
Format or file type
DVD-Video
*1
DVD-R*2
DVD-Video, MP3,
WMA, JPEG
DVD-RW*2
DVD-Video, MP3,
WMA, JPEG
Audio CD*3
PCM
CD-R*2
Audio CD, MP3, WMA,
JPEG
CD-RW*2
Audio CD, MP3, WMA,
JPEG
JPEG CD
JPEG
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the
DV-CP704 and you may not be able to remove the
disc properly.
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play
on the DV-CP704.
DVD Region Numbers
1
The North American DV-CP704 supports only
Region 1 DVD-Video discs bearing this logo.
4
The Australian DV-CP704 supports only Region
4 DVD-Video discs bearing this logo.
If you attempt to play a disc intended for another region,
a message saying that the disc cannot be played appears.
Function Support
– DVD+R/RW –
The DV-CP704 supports DVD+R/RW discs recorded
in the following formats:
• Discs recorded in DVD-Video mode.
• Discs recorded in ISO 9660 Level 2 or Joliet format containing MP3, WMA, or JPEG files.
*1 The North American model will only play Region 1 NTSC
DVD-Video discs. The Australian model will only play Region
4 PAL DVD-Video discs, although it can be set to AUTO, in
which case it will also play Region 4 NTSC DVD-Video discs.
*2 MP3, WMA, and JPEG files are supported on discs recorded in
ISO 9660 Level 2 or Joliet format. (See “MP3/WMA/JPEG
Compatibility” on page 8 for more details.) However, some
CD-R, CD-RW, DVD-R, and DVD-RW discs may not work
properly for any of the following reasons: incomplete disc
finalization, disc burner characteristics, disc characteristics, the
disc is damaged or dirty, the total size of the data is too small.
See the manual supplied with your disc burner for more information. Condensation or dirt on the optical pickup lens can also
affect playback.
*3 Some audio CDs feature copy protection that doesn’t conform
to the official CD standard. Since these are nonstandard discs,
they may not play properly in the DV-CP704.
• The DV-CP704 does not support disc types not listed.
• The DV-CP704 supports 8 cm and 12 cm discs.
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the
DV-CP704.
The following icons are used throughout this manual to
indicate which functions can be used with the various
disc formats and file types.
Icon
Disc format or file type
DVD
DVD-Video
CD
Audio CD
MP3
MP3 file
WMA
WMA file
JPEG
JPEG file
About this Manual
This manual explains how to use all of the DVD player’s
functions. Although the DVD standard offers many special features, not all discs use them all, so depending on
the disc being played, the DVD player may not respond
to certain functions. See your disc’s sleeve notes for supported features.
When you attempt to use a DVD feature that is
not available, this logo may appear onscreen,
indicating that the feature is not supported by
the current disc or by the DVD player.
7
Introduction—Continued
Disc Content Organization
MP3/WMA/JPEG Compatibility
■ DVD-Video Format
DVD-Video discs contain titles, which are usually subdivided into chapters.
• The DV-CP704 can play/display MP3, WMA, and
JPEG files recorded on CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R and DVD+RW discs.
• Discs must be in ISO 9660 Level 2 or Joliet format
(folders can be up to eight levels deep). Music files
recorded on discs that use the HFS (hierarchical file
system) cannot be played.
• Discs must be finalized.
• The DV-CP704 can only recognize the first session on
multisession discs.
• You can determine the order in which the DV-CP704
plays/displays your MP3/WMA songs and JPEG pictures by prefixing file and folder names with a threedigit number. For example 001.Root, 002.Folder, and
so on, and 001.Track.mp3, 002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the
Disc Navigator.
• The DV-CP704 supports up to 255 folders and up to
255 files per folder.
• If you try to play an incompatible file, the message
“This format cannot be played” appears on the display.
Title 1
Chapter 1
Chapter 2
Title 2
Chapter 1
Chapter 2
DVD-Video
■ Audio CD Format
Audio CDs contain tracks.
Track 1
Track 2
Track 3
Track 4
Track 5
Audio CD
■ MP3/WMA Files
MP3 and WMA files are typically organized into folders.
The DV-CP704 handles MP3 and WMA files as tracks.
Track 1
Folder 1
Track 2 Track 3
Folder 2
Track 1 Track 2
MP3/WMA
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
■ JPEG Files
JPEG picture files are typically organized into folders.
The DV-CP704 handles JPEG files as tracks.
Track 1
Folder 1
Track 2 Track 3
Folder 2
Track 1 Track 2
JPEG
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
■ MP3
• MP3 files must be MPEG1 Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
• MP3 files must have a “.mp3” or “.MP3” filename
extension.
• Variable bit-rates (VBR) from 64 kbps to 320 kbps are
supported. (Playing times may display incorrectly
with VBR.)
■ WMA
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
• Variable bit-rates (VBR) from 48 kbps to 192 kbps are
supported. (Playing times may display incorrectly
with VBR.)
• WMA files must have a “.wma” or “.WMA” filename
extension.
■ JPEG
• JPEG files must have a “.jpg” or “.JPG” filename
extension.
• JPEG files must be less than 5 megabytes in size.
About WMA
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
by using Windows Media® Player version 7, 7.1 or 8.
8
Introduction—Continued
Handling Discs
Copyright
• Never touch the underside of a disc. Always hold discs
by the edge, as shown.
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any recordings made from these discs will be distorted.
Underside
• Never attach adhesive tape or sticky labels to discs.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Cleaning Discs
• For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
✔
• To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
9
Introduction—Continued
DV-CP704-related Terminology
■ CD-R (compact disc recordable): A type of
CD that can be recorded only once. Can be used to
make audio CDs, or MP3/WMA/JPEG discs.
■ CD-RW (compact disc rewritable): A type of
CD that can be recorded many times. Can be used to
make audio CDs, MP3/WMA/JPEG discs.
■ Chapter: Titles on DVD-Video discs can be subdivided into chapters.
■ Component video: A video connection format
that separates the luminance (Y) and color difference
signals (PR, PB), providing better picture quality than
S-Video.
■ Composite video: A video connection format that
mixes the luminance and color signals together.
■ Dolby Digital: The multi-channel digital surround
sound format used on most DVD-Videos.
■ Downmixing: The process of mixing multiple
audio channels into fewer channels. For example, a
5.1-channel surround mix can be downmixed into
two channels for reproduction on stereo systems.
■ Downsampling: The process of reducing the sampling rate of digital audio.
■ DTS (Digital Theater System): The 5.1-channel
surround format that uses less compression for faithful reproduction.
■ DVD-R (DVD recordable): A type of DVD disc
that can be recorded only once. Can be used to make
DVD-Video discs or to store computer data.
■ DVD-RW (DVD rewritable): A type of DVD disc
that can be recorded many times. Can be used to
make DVD-Video discs or to store computer data.
■ DVD-Video: The format for storing movies on
DVD, with interactive menus, multiple language
soundtracks, subtitles, camera angles, and so on.
■ Field: In interlaced scanning, a field is a single scan
of the screen. There are two fields per frame.
■ Frame: An individual TV picture is called a frame.
With the NTSC color system there are 30 frames per
second.
■ HD: Abbreviation for high definition, as in
HDTV(high-definition TV).
■ HDCP (High-bandwidth Digital Content
Protection): The video encryption technology
developed by Intel for HDMI/DVI. It’s designed to
protect video content and requires a HDCP-compatible device to display the encrypted video.
10
■ HDMI (High Definition Multimedia Interface):
A new connection format that greatly simplifies AV
connections by carrying uncompressed SD or HD
digital video and digital audio all in one cable.
■ Interlaced scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With Interlaced scanning, two scans (fields)
are used to make each picture (frame). Contrast with
Progressive scanning.
■ JPEG (Joint Photographic Experts Group):
The compressed file format used to store digital photos.
■ LFE (low-frequency effects): The surroundsound channel used for low-frequency effects.
■ Linear PCM: The uncompressed digital audio format used for audio CDs. PCM stands for Pulse Code
modulation.
■ MP3 (MPEG 1 Audio Layer 3): Popular compressed file format for storing digital music.
■ MPEG1 (Moving Picture Experts Group 1):
The compressed digital video format used for Video
CDs.
■ MPEG2 (Moving Picture Experts Group 2):
The compressed digital video format used for
DVD-Videos, offering better picture quality than
MPEG1.
■ NTSC: The color TV system used in the United
States, Japan, Taiwan, and Korea.
■ PAL: The color TV system used in most of Europe,
the United Kingdom, Australia, Brazil, and China.
■ Progressive scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With progressive scanning, each picture
(frame) is made by scanning the entire screen in one
go, resulting is a clearer and stabler picture. Contrast
with Interlaced scanning.
■ S-Video: A video connection format that separates
the luminance (Y) and color (C) signals, providing
better picture quality than composite video.
■ Title: Movies on DVD-Video are called titles.
■ WMA (Windows Media Audio): A compressed
file format for storing digital music.
Controls & Connectors
Front Panel
A
B
C
H I J K
D
E
L
M
F
G
NO P Q R S
The page numbers in parentheses show where you can find the main explanation for each item.
A STANDBY/ON button (22, 45)
This button is used to set the DV-CP704 to On or
Standby.
Don’t turn on the power until you’ve completed,
and double checked all connections (page 22).
B STANDBY indicator (22)
This indicator lights up when the DV-CP704 is in
Standby mode.
C Disc tray (23)
The disc tray has six bays for loading up to six
discs.
D Disc tray light
This light illuminates the disc tray. It comes on
when the DV-CP704 is turned on, and is brighter
while the disc tray is open.
E DISC SKIP button (23, 24)
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
F DISC SELECT 1–6 buttons (24)
These buttons are used to select discs. Playback
starts automatically when a disc is selected with
these buttons.
G Open/Close [ ] button (22, 23, 24)
This button is used to open and close the disc tray.
K REPEAT button (34)
This button is used with the Repeat function.
L Display
See “Display” on page 12 for more information.
M Remote control sensor (16)
This sensor receives control signals from the remote
controller.
N Previous [
] button (25, 27–29, 32)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current track.
O Next [
] button (25, 27–29, 32, 35)
This button is used to select the next chapter or
track.
P PARTY MODE button (33)
This button is used with the Party mode function.
Q PAUSE [ ] button (25)
This button is used to pause playback.
R STOP [ ] button (25)
This button is used to stop playback and to cancel
Party mode.
S PLAY [ ] button (25)
This button is used to start playback and to cancel
fast forward and fast reverse.
H RANDOM button (35)
This button is used with the Random function.
I DIMMER button (31)
This button is used to adjust the display brightness
and turn the disc tray light on or off.
J DISPLAY button (41)
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
11
Controls & Connectors—Continued
Display
1
2
CHAIN MODE DISC
ALL
DVD
CD
3
TITLE
4 5
6 7 8 9 0A B
CHP
PRGV
TRACK
LAST
TOTAL
REMAIN
CDVD
D
E
C
1
2
3
4
5
6
F
The page numbers in parentheses show where you can find the main explanation for each item.
1 CHAIN MODE, ALL, DVD & CD indicators
(33)
The CHAIN MODE indicator appears when the
Chain mode function is on. The ALL, DVD, and CD
indicators show the type or Chain mode selected.
When Party mode is selected, the CHAIN MODE
and CD indicators appear.
2 DISC indicator
The number of the currently selected disc appears
here.
3 TITLE indicator
While stopped, the total number of titles on the current DVD-Video disc is displayed here. During
playback, the number of the current title is displayed.
4 CHP indicator
This indicator appears while the number of the current chapter is being displayed.
5 TRACK indicator
This indicator appears while track numbers are
being displayed. While stopped, the total number of
tracks on the current audio CD, or MP3/WMA disc
are displayed. During playback, the number of the
current track is displayed.
6 PRGV indicator
This indicator appears when the Progressive Scanning function is on.
7 LAST indicator (40)
This indicator appears when the Last Memory function has been set.
8 TOTAL indicator
This indicator appears while the total time is being
displayed.
12
9 REMAIN indicator
This indicator appears while the remaining time is
being displayed.
0 Camera angle
indicator (37)
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
A Play
indicator (25)
This indicator is shown during playback.
B Pause
indicator (25)
This indicator appears when playback is paused.
C Disc indicators 1–6 (23)
These indicators show how many discs are loaded.
The number of the current disc has a circle around
it.
When the disc tray is closed, all of the disc indicators appear until the DV-CP704 has checked each
bay for the presence of a disc. If a bay is found to
have no disc, the corresponding indicator disappears.
D Chapter & track number
Chapter and track numbers appears here.
E Time display
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
F CDVD indicator
This indicator shows the type of disc currently
selected:
DVD: DVD-Video, DVD-R, DVD-RW, DVD+R, or
DVD+RW
CD: Audio CD, MP3/WMA/JPEG CD-R, or
CD-RW
Controls & Connectors—Continued
Rear Panel
1
2
34
9
5
6
7 8
The page numbers in parentheses show where you can find the main explanation for each item.
A
REMOTE CONTROL
These
(Remote Interactive) connectors can be
connected to the
connectors on your other
Onkyo AV components for interactive control.
B ANALOG AUDIO OUTPUT
These RCA/phono connectors can be connected to
analog audio inputs on a hi-fi amp, or AV receiver.
C COAXIAL AUDIO OUTPUT
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D OPTICAL AUDIO OUTPUT
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
E HDMI OUT
This HDMI jack outputs digital video and audio and
can be connected to an HDMI input on a compatible
TV or other component.
F COMPONENT VIDEO OUTPUT
These RCA/phono connectors can be used to connect a TV or projector with component video inputs.
G S VIDEO OUTPUT
This connector can be used to connect a TV or projector with an S-Video input.
H VIDEO OUTPUT
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
I Power cord
This power cord should be connected to a suitable
wall outlet.
See page 18–21 for connection information.
13
Controls & Connectors—Continued
Remote Controller
The page numbers in parentheses show where you can
find the main explanation for each item.
A ON button (22)
1
2
This button is used to turn on the DV-CP704.
Don’t turn on the DV-CP704 until you’ve completed, and double checked all connections
(page 17).
P
Q
B STANDBY button (22)
This button is used to set the DV-CP704 to Standby.
R
C Number buttons (28, 29, 36, 47)
S
3
T
U
4
5
6
W
X
Y
7
8
9
J
a
b
c
V
Z
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific points in time.
To enter a single-digit number, simply press the corresponding button. To enter a double-digit number,
enter the numbers in order from left-to-right (e.g., to
enter 14, press [1] then [4].
The [+10] button is used to enter multiples of ten
(i.e., 10, 20, 30, and so on). For example, to enter
the number 25, press the [+10] button twice followed by the [5] button.
D AUDIO button (26, 38)
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital
or DTS).
E SUBTITLE button (26, 38)
K
This button is used to select subtitles.
d
F RANDOM button (35)
This button is used with the Random Playback function.
L
e
M
N
O
f
g
G SLOW [
]/[ ] buttons (31)
These buttons are used for slow motion playback.
H Previous [
] button (25, 27, 29, 32)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current track.
I Play [ ] button (25)
This button is used to start playback.
J Fast Reverse [
] button (30)
This button is used to start fast reverse.
K [ ], [ ], [ ], [ ] buttons (26)
These buttons are used to navigate DVD-Video
menus and the onscreen setup menus.
L TOP MENU button (26, 32)
This button is used to select the top menu.
M MENU button (26, 32)
This button is used to select the menu.
14
Controls & Connectors—Continued
N ASPECT/ZOOM button (41, 44)
This button is used to change the view mode. Pressing and holding it for a few seconds selects Zoom
mode.
O RESOLUTION button (39)
f RETURN button (43)
This button is used to exit the onscreen setup
menus.
g CHAIN MODE button (33)
This button is used with the Chain mode function.
This button is used to set the video resolution of the
HDMI OUT, and to turn the HDMI OUT on or off.
P OPEN/CLOSE [ ] button (23, 24)
This button is used to open and close the disc tray.
Q DISC SKIP [+]/[–] button (23, 24)
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
R SEARCH button (28, 29)
This button is used to search for titles, chapters,
tracks, and specific points in time.
S MEMORY button (36)
This button is used with the Memory Playback
function.
T REPEAT button (34)
This button is used to set the Repeat Playback functions.
U A–B button (34)
This button is used to set the A–B Repeat Playback
function.
V CLR button (37, 47)
This button is used to cancel various functions.
W DISPLAY button (41)
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
X ANGLE button (37)
This button is used to select different camera angles.
Y LAST MEMORY button (40)
This button is used with the Last Memory function.
Z Pause [ ] button (25, 30)
This button is used to pause playback. For DVDs,
pressing this button while playback is paused moves
the video forward one frame at a time.
a Next [
] button (25, 27, 29, 32)
This button is used to select the next chapter or
track.
b Stop [ ] button (25)
This button is used to stop playback.
c Fast Forward [
] button (30)
This button is used to start fast forward.
d ENTER button (43)
This button is used to start playback of the selected
title chapter, or track and to confirm settings.
e SETUP button (43)
This button is used to open and close the onscreen
setup menus.
15
Before Using the DV-CP704
Installing the Remote Controller’s
Batteries
1
Open the battery compartment, as
shown.
Using the Remote Controller
To use the remote controller, point it at the DV-CP704’s
remote control sensor, as shown below.
Remote control sensor
DV-CP704
30˚
)
5
.(
30˚
6
2
3
Insert the two supplied batteries (AA/
R6) in accordance with the polarity diagram inside the battery compartment.
Close the battery compartment.
Notes:
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
16
m
ft
1
x.
ro
p
Ap
Notes:
• The remote controller may not work reliably if the
DV-CP704 is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing the DV-CP704.
• If another remote controller of the same type is used in
the same room, or the DV-CP704 is installed close to
equipment that uses infrared rays, the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
DV-CP704 is installed in a rack behind colored glass
doors. Keep this in mind when installing the
DV-CP704.
• The remote controller will not work if there’s an obstacle between it and the DV-CP704’s remote control
sensor.
Connecting the DV-CP704
RCA/phono AV Connection Color Coding
This chapter explains how to connect the DV-CP704 to
your other AV components.
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
RCA/phono AV connections are usually color coded:
red, white, and yellow. Use red plugs to connect rightchannel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
Optical Digital Jack
Right (red)
The DV-CP704’s optical digital jack has shutter-type
cover that open when an optical plug is inserted and
close when it’s removed. Push plugs in all the way.
Left (white)
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
• Push the plugs in all the way
to make a good connection.
• To prevent interference, keep
audio and video cables away
from power cords and speaker
cables.
Before Making Any Connections
(Yellow)
Analog audio
Right (red)
Left (white)
Composite video
(Yellow)
Right!
Wrong!
AV Cables & Connectors
Video
HDMI connections can carry uncompressed, standard or high definition digital
video and digital audio, for the best picture
and sound quality.
HDMI
Y
Component
video
Component video separates the luminance
(Y) and color difference signals (PR, PB),
providing the best picture quality. (Some
TV manufacturers label their component
video inputs slightly differently.)
Y
PB / C B
PB / C B
PR / C R
PR / C R
S-Video
S-Video provides better picture quality
than composite video.
Composite
video
Composite video can be found on virtually
all TVs, VCRs, and other video equipment.
Use only dedicated composite video
cables.
Audio
Optical digital
Optical digital audio connections with the
optical digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
Coaxial digital
Coaxial digital audio connections with the
coaxial digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
Analog
RCA/phono analog audio connectors can
be found on virtually all AV components.
17
Connecting the DV-CP704—Continued
Connecting Your TV or Projector
This section explains how to connect the DV-CP704 to
your TV or projector.
In this hookup example, the TV handles the audio and video.
To enjoy Dolby Digital or DTS (5.1-channel surround),
you’ll need a compatible decoder (see page 19).
The DV-CP704 has three types of video output: component video, S-Video, and composite video. Component
video offers the best picture quality, so if your TV supports
it, use a commercially available component video cable to
connect the DV-CP704’s COMPONENT VIDEO OUTPUT to the component video inputs on your TV. If your
TV supports progressive scanning, you must use component video in order to take advantage of that feature.
S-Video offers better picture quality than composite
video, so if your TV supports it, use the S-Video cable to
connect the DV-CP704’s S VIDEO OUTPUT to an
S-Video input on your TV. Failing that, use the supplied
(red)
(white)
AV RCA/phono
cable (supplied)
composite video cable to connect the DV-CP704’s
VIDEO OUTPUT to a composite video input on your TV.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Component
video cable
S-Video cable
(yellow)
Only one connection
required! Choose
component video,
S-Video, or
composite video.
S VIDEO IN
IN
Y
(red)
PB
TV or projector
(white)
PR
(yellow)
VIDEO IN
L
R
ANALOG
INPUT
Notes:
• Before making any connections, turn off the
DV-CP704 and your TV and disconnect their power
cords from the wall outlets.
• Also refer to the connection information supplied with
your TV.
• If you connect a TV that does not support progressive
scanning to the component video output, change the
HDMI Output Setting to Off (see page 44).
18
• Connect the DV-CP704’s video outputs directly to
your TV. Don’t connect a VCR or other video equipment in between your DV-CP704 and TV. Doing so
may result in picture distortion, because of the copy
protection system used on DVD-Video discs.
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
Connecting the DV-CP704—Continued
Connecting an AV receiver
To enjoy Dolby Digital or DTS surround sound, you
need to connect one of the DV-CP704 digital audio outputs to the digital input on a Dolby Digital or DTS
decoder or an AV receiver with built-in decoders.
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP704’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your AV receiver, as shown.
Signal flow
L
Notes:
• Make sure that the Digital/HDMI Audio Out setting
on the Audio menu is set to All (see page 45). Otherwise, you won’t get surround sound.
• Also refer to the connection information supplied with
your AV receiver or decoder.
• When playing Dolby Digital or DTS source material,
be sure to select Dolby Digital or DTS decoding,
respectively, on your AV receiver or decoder. See the
relevant manuals.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
R
(white)
(red)
ANALOG
INPUT
Connecting a Stereo Amp
This section explains how to connect the DV-CP704 to a
stereo amp for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP704. DVD-Video discs will
sound better too.
RCA/phono cable
(white)
(red)
L
Analog Connection
AUDIO
OUTPUT
ANALOG
Use an RCA/phono audio cable to connect the
DV-CP704’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your stereo amp, as shown.
R
Signal flow
Digital Connection
L
Use an optical (or coaxial) digital audio cable to connect
the DV-CP704’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your AV receiver, as shown.
R
(white)
(red)
ANALOG
INPUT
RCA/phono cable
(white)
Coaxial digital
cable (supplied)
(red)
L
Signal flow
AUDIO
OUTPUT
ANALOG
COAXIAL
R
OPTICAL
Connect one or
the other
Optical
digital
cable
OPTICAL
COA
XIAL
Note:
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
AV component with
Dolby Digital/DTS decoder
19
Connecting the DV-CP704—Continued
Digital Connection
Use an optical (or coaxial) digital audio cable to connect
the DV-CP704’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your stereo amp, as shown.
Signal flow
OPTICAL
COA
XIAL
Connect one or the other
COAXIAL
OPTICAL
Optical
digital cable
Coaxial
digital
cable
(supplied)
Notes:
• Be sure to set the Audio menu, Digital/HDMI Audio
Out setting to “PCM” (see page 45). Otherwise an
unpleasant digital noise may be heard, which may
damage your equipment.
• Never connect the DV-CP704 to the AC-3RF input on
a Dolby Digital receiver. The AC-3RF format is not
supported by the DV-CP704.
Connecting a Component with an
HDMI Input
This section shows how to connect the DV-CP704 to a
AV receiver, HDTV, or projector that has an HDMI input
socket.
What is HDMI?
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, standard or high definition digital video and up to eight channels of digital audio. Until now, several separate video
and audio cables have been required to connect AV components together. With HDMI, a single cable is all that’s
necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires
an HDMI-to-DVI cable. The DV-CP704 supports HDCP
(High-bandwidth Digital Content Protection), and for an
HDMI-to-DVI connection to work, the other component
must also support it. Note that this may not work with
some DVI components.
Using HDMI
Use the HDMI cable to connect the DV-CP704’s HDMI
OUT to an HDMI input on your AV receiver. Alternatively, you can connect the DV-CP704 directly to the
HDMI input on your TV.
Signal flow
HDMI cable
HDMI
IN
HDTV,
projector
or
AV receiver
HDMI
IN
HDMI
20
HDMI
IN
HDTV,
projector
Connecting the DV-CP704—Continued
Notes:
• The DV-CP704 supports HDCP (High-bandwidth
Digital Content Protection), a protection system for
digital video. HDMI components that you connect to
the DV-CP704 must also support HDCP.
• The DV-CP704 supports High-Definition Multimedia
Interface Specification Information Version 1.0.
Connecting
Components
-compatible
AV receiver
HDMI & the DV-CP704
■ Video
The DV-CP704’s HDMI OUT supports the following
video resolutions:
• 720 x 480p 60 Hz
• 720 x 576p 50 Hz (Australian model only)
• 1280 x 720p 50/60 Hz
• 1920 x 1080i 50/60 Hz
If the connected HDTV or projector doesn’t support a
resolution, you may get no picture.
On the DV-CP704, you can select a resolution suitable
for use with the connected HDTV or projector (see
page 39).
■ Audio Formats
The DV-CP704’s HDMI OUT supports the following
audio formats:
• PCM (48 kHz, 44.1 kHz, 96kHz)
• Dolby Digital
• DTS
If your TV only supports HDMI digital audio up to
48 kHz, change the Linear PCM Out setting to Down
Sample On (see page 45).
If your TV doesn’t support Dolby Digital, set the Digital/
HDMI Audio Out setting to PCM (see page 45).
If your TV doesn’t support DTS, the DV-CP704 will not
be able to play DTS format audio or soundtracks. In this
case, on your DVD-Video disc’s audio setup menu,
select an audio format other than DTS.
IN
L
REMOTE
CONTROL
R
• The remote controller supplied with Onkyo AV
receiver or amplifiers can be used to control the
DV-CP704.
• The function of the upper and lower
connectors are
the same. Connect to either one.
• Connecting an
cable only does not make the system operational. You must also connect the audio
cables as well.
• For remote control operation, you must make an analog RCA connection between your DV-CP704 and the
other AV component, even if they are connected digitally.
21
Powering Up & Setting Up the DV-CP704
ON STANDBY
STANDBY/ON
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
√ 4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
16:9 Compressed
STANDBY indicator
ENTER
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting,
and select a language for the onscreen setup menus. You
can change these settings later by using the onscreen
setup menus (see page 42).
Powering Up the DV-CP704
Before connecting the power cord, connect all your AV
components (see page 17 to page 21).
Don’t forget to turn on your TV or projector and select
the video input to which the DV-CP704 is connected.
If you’re using a hi-fi amp, AV receiver, or surround
sound decoder for audio playback, turn that on as well
and select the audio input to which the DV-CP704 is
connected.
1
Connect the power cord to a suitable wall outlet.
The DV-CP704 enters Standby mode,
and the STANDBY indicator comes on.
2
To turn on the DV-CP704, press
the [STANDBY/ON] button (or the
remote controller’s [ON] button).
The DV-CP704 comes on, the display
lights up, and the STANDBY indicator
goes off.
To turn off the DV-CP704, press the
[STANDBY/ON] button (or the remote
controller’s [STANDBY] button). The
DV-CP704 enters Standby mode and
the STANDBY indicator comes on.
Remote controller
First Time Setup
The very first time you turn on your DV-CP704, the Initial Setup menu appears onscreen, as shown.
22
1
Remote controller
2
Remote controller
3
Remote controller
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select a TV
shape, and then press [ENTER].
See page 44 for more information on
the TV Shape options.
The HDMI Output Setting menu
appears.
Select a HDMI Output Setting
option, and then press [ENTER].
See page 44 for more information on
the HDMI output options.
The On-Screen Language menu
appears.
Select a language, and then
press [ENTER].
See page 46 for more information on
the language options.
The Initial Setup menu closes.
Your DV-CP704 is now ready for use. See page 23 for
information on loading discs, and page 24 for information on selecting and playing discs.
Notes:
• You can cancel the Initial Setup by pressing the
OPEN/CLOSE [ ] button, and complete the settings
later by using the onscreen setup menus (see page 48).
• You can change the language of the onscreen setup
menus, and your preferred languages for DVD menus,
foreign language soundtracks, and subtitles individually on the Language page of the onscreen setup
menus (see page 46).
• Not all DVD-Video discs have multi-language menus,
foreign language soundtracks, and subtitles. In such
cases, the disc’s default language is used.
Basic Playback
DISC SKIP
DISC SKIP
DISC
SELECT
OPEN/CLOSE
Tip: If you press the Play [ ] button,
the disc tray will close and playback of
the disc in the right bay will start automatically. If there is no disc in that bay,
the DV-CP704 will check the other
bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
PLAY
Loading & Removing Discs
DVD
CD
MP3
WMA
JPEG
This section explains how to load and remove discs.
1
Remote controller
Press the OPEN/CLOSE [ ]
button.
The disc tray opens and the six disc
number indicators appear on the display. A circle appears around the number of the disc bay on the right.
2
Place a disc, label side up, into
each bay.
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
Press the remote controller’s DISC
SKIP [+] button to turn the disc tray
counterclockwise. Press the DISC
SKIP [–] button to turn it clockwise.
Remote controller
4
Notes:
• You can load up to six discs. You don’t have to load all
six discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP704 has checked each bay for
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DV-CP704 is in Standby mode, so you don’t have to
turn it on to load or remove your discs. (The disc tray
may take several seconds to open.)
• The DV-CP704 supports 8 cm and 12 cm discs. To
avoid damaging your discs or DV-CP704, always
place discs in the center of the disc bays.
• Only load discs that are supported by the DV-CP704
(see page 7). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from
the disc tray as it closes.
• Always use the OPEN/CLOSE [ ] button to open
and close the disc tray. Never push the disc tray, and
don’t touch it, or obstruct it while it’s opening or closing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or DV-CP704.
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
See page 24 for information on selecting and playing discs.
Remote controller
23
Basic Playback—Continued
DISC SKIP
DISC SKIP
DISC
SELECT
OPEN/CLOSE
Selecting Discs
DVD
CD
MP3
WMA
JPEG
The section explains how to select loaded discs.
Loading Discs During Playback
DVD
CD
MP3
WMA
JPEG
This section explains how to load and remove discs without stopping playback.
1
Remote controller
2
Press the OPEN/CLOSE [ ]
button.
The disc tray opens.
The disc that’s currently playing
remains inside the DV-CP704 and its
disc bay is empty and won’t come to the
front. To remove this disc you must
stop playback before pressing the
OPEN/CLOSE [ ] button.
Load or remove discs as
required, and press the [DISC
SKIP] button to access the other
disc bays.
Remote controller
3
Remote controller
24
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
Playback of the current disc continues
uninterrupted until you either stop
playback or select another disc.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close, playback of the current disc will
stop, and playback of the newly
selected disc will start automatically.
Use the DISC SELECT buttons to
select loaded discs.
On the display, the number of the current disc has a circle around it.
What happens next depends on the type
of disc you selected, as follows:
DVD-Video:
Typically a menu appears onscreen.
See page 26.
Audio CD:
Playback starts automatically.
MP3/WMA/JPEG:
Playback starts automatically,
although this may vary depending
on the disc.
JPEG-only CD:
The slideshow starts automatically.
See page 32.
Notes:
• The type of disc currently selected is shown on the display: DVD, or CD (see page 12).
• You can select discs while the DV-CP704 is stopped
or during playback.
• You can use the [DISC SKIP] button to skip the current disc and start the next disc. If disc #6 is the current
disc, disc #1 will be selected next.
Basic Playback—Continued
PAUSE
STOP
PLAY
ENTER
Starting, Pausing & Stopping
Playback
DVD
This section explains how to start, pause, and stop playback.
■ Start
Remote controller
■ Pause
Remote controller
■ Stop
To start playback, press the Play
[ ] button.
Playback starts and the Play indicator appears on the display.
If the disc is a DVD-Video, you may
need to start playback from a menu (see
page 26).
Notes:
• During playback, you can select chapters or tracks by
using the Next [
] and Previous [
] buttons.
• When you stop playback of a DVD-Video disc, the
DV-CP704 remembers the point at which playback
was stopped. To resume playback from that point,
press the Play [ ] button. To cancel the Resume function, press the Stop [ ] button again. The Resume
function is reset when another disc is selected.
• With the Last Memory function you can resume playback from a specific point even if the disc has been
removed (see page 40).
• Do not move the DV-CP704 or subject it to vibration
during playback. Doing so may damage your discs or
DV-CP704.
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t keep playback
paused for too long and always press the Stop [ ] button when you’ve finished playing a DVD-Video disc.
Your DV-CP704 features a screen saver to protect
your TV from the effects of burn-in (see page 46).
With some DVD-Video discs, you may experience picture noise that is not normally visible with regular TV
broadcasts. This is usually because DVD-Video discs
uses a lot of high-resolution video data. The amount of
noise, if any, will depend on your particular TV and the
problem can sometimes be alleviated by turning down
your TV’s sharpness control.
To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause indicator appears on the display.
To resume playback, press the Play [ ]
button.
Playback resumes and the Pause
indicator disappears.
To stop playback, press the Stop
[ ] button.
Playback stops and the Play indicator disappears.
Remote controller
25
Basic Playback—Continued
• With DVD-Video discs, foreign language soundtracks
and audio formats can usually be selected during playback by using the remote controller’s [AUDIO] button
(see page 38). Similarly, subtitles can be selected by
using the remote controller’s [SUBTITLE] button (see
page 38).
AUDIO
SUBTITLE
ENTER
TOP MENU
MENU
Navigating Disc Menus
DVD
DVD-Video discs usually have an onscreen menu from
which you can select titles, chapters, and other options,
including foreign language soundtracks, subtitles, and
audio formats (e.g., Dolby Digital or DTS).
1
Load and select a DVD-Video
disc.
See page 23 and page 24.
With DVD-Video discs, a menu usually
appears automatically. If it doesn’t, try
pressing the [TOP MENU] button.
2
Use the remote controller’s navigation [ ], [ ], [ ], [ ] buttons to
select items on the menu, and
use the [ENTER] button to confirm your selection.
If you select a playback option (e.g.,
subtitles), another menu of options will
typically appear, in which case you use
the remote controller’s navigation buttons to select items and the [ENTER]
button to confirm your choice.
Remote controller
Notes:
• Not all DVD-Video discs have menus.
• Menu operation varies from disc-to-disc. See the
disc’s sleeve notes for details.
• On some DVD-Video discs, options such as foreign
language soundtracks, subtitles, and audio formats
appear on a separate menu called the disc menu, and
titles and chapters appear on what’s called the title
menu. To display the disc menu, press the [MENU]
button. If no menu appears, press the [TOP MENU]
button.
26
Basic Playback—Continued
A Folder number and file number.
B Elapsed time, remaining time, and
total time of currently playing
song. (Only elapsed time is shown
for WMA files.) (See also page 41.)
C Repeat function and Random
function status.
PLAY
D For JPEG files, a preview and the
STOP
file size are displayed here.
E Information about the song
currently playing (e.g., song title,
artist name, album name) is
displayed here, if available.
MEMORY
2
Remote controller
ENTER
TOP MENU
MENU
For audio CDs:
Use the Up/Down [ ]/[ ] buttons to
select a track, and press the Play [ ]
button (or [ENTER]) to start playback.
RETURN
Using the Disc Navigation Window
CD
MP3
WMA
JPEG
On the disc navigation window, you can select CD tracks
or MP3, WMA, or JPEG files.
1
Load and select an audio CD or
MP3, WMA, or JPEG disc.
See page 23 and page 24.
The disc navigation window appears.
It may take a while to read the contents
of discs that contain many files and
folders.
For JPEG discs, a slideshow starts automatically. To open the disc navigation
window, press the [MENU] button.
This is the display for an MP3 disc.
1
2
Play
1/10
Disc
1/8
00:05:06
00:05:30
/MP3 music
001. ROOT
002. MP3 music
Repeat
Ramdom
: Off
: Off
3
003. Onkyo 1
004. Onkyo 2
M
M
M
M
P3
001. Track01
P3
002. Track02
P3
003. Track03
P3
004. Track04
Name: Onkyo Title
4
Artist Name: Onkyo Artist
You can select the next or previous
track during playback by using the
Next [
] and Previous [
] buttons.
Press the Previous [
] button to
restart the current track. Press it again
to select earlier tracks.
Alternatively, the number button is
used to select a track.
For MP3, WMA, and JPEG discs:
To open a folder, use the remote controller’s Up/Down [ ]/[ ] buttons to
select it, and then press [ENTER].
Use the Up/Down [ ]/[ ] buttons to
select tracks in the open folder.
You can select the next or previous
track during playback by using the
Next [
] and Previous [
] buttons.
Press the Previous [
] button to
restart the current track. Press it again
to select earlier tracks.
Use the Left/Right [ ]/[ ] buttons to
select other folders.
4: DATA
00:00:24
Press the Play [ ] button to start playback. Press the Stop [ ] button to stop
playback. Press the Pause [ ] button to
pause playback and the Play [ ] button
to resume it.
5
To close a folder (i.e., move back up the
directory tree), press the [RETURN]
button.
When all the tracks in that folder have
been played, tracks in the next folder
are played.
27
Basic Playback—Continued
If the disc contains MP3/WMA files
and JPEG files, they are played/displayed in order. JPEG files will be displayed in a slideshow. Press the
[TOP MENU] button to display the
first nine pictures at thumbnail-size
(see page 32). Depending on the disc,
the first nine pictures may be displayed
automatically.
3
Number
buttons
SEARCH
CLR
Press the Stop [ ] button to stop
playback.
PLAY
ENTER
Remote controller
Notes:
• You can use the Random Playback function to play a
random selection of MP3/WMA files (page 35).
• During random playback, memory playback, or party
mode playback, the remote controller’s navigation
[ ], [ ], [ ], [ ] buttons, OPEN/CLOSE [ ] button,
and DISC SKIP [+]/[–] buttons cannot be used with
the disc navigation window.
• Depending on their size and format, some JPEG files
cannot be displayed.
Selecting Titles, Chapters & Tracks by
Number
DVD
CD
MP3
WMA
This section explains how to select titles, chapters, and
tracks by number.
1
Load and select a disc.
See page 23 and page 24.
2
Press the [SEARCH] button.
The Search window appears onscreen,
as shown.
This is the display for a DVD-Video
disc.
Remote controller
Step
Disc
1: DVD
Search
Disc
1:DVD-VIDEO
Title
Current/Total
Chapter
2/
3 Current/Total
4 / 22
With some DVD-Video discs, you can
select only titles, and the Chapter Current/Total information is not displayed.
Some discs won’t allow you to select
titles.
For audio CDs, you can select tracks.
For MP3 and WMA discs, you can
select tracks and folders.
28
Basic Playback—Continued
3
Remote controller
Use the number buttons to specify a chapter or title.
To enter, for example, “2,” press the [2]
button.
Step
Disc
1: DVD
Locating Specific Points in Time
DVD
CD
With the Time Search function you can locate specific
points in time.
Search
Disc
1:DVD-VIDEO
Title
Chapter
2/
Current/Total
3 Current/Total
2 / 22
1
Remote controller
To enter, for example, “12,” press the
[1] button, followed by the [2] button.
Step
Disc
Search
1: DVD
Disc
Search
Disc
1:DVD-VIDEO
Title
Current/Total
Remote controller
Title
-- : -- : --
3 Current/Total 12 / 22
To clear the number, press the [CLR]
button.
Use the Left/Right [ ]/[ ] buttons to
toggle between Title and Chapter or
Folder and Track.
4
1: DVD-VIDEO
Chapter
2/
Press the [SEARCH] button
twice.
The Search window appears onscreen,
as shown.
2
Remote controller
Use the number buttons to enter
a time.
To enter, for example, 1 hour, 25 minutes, 30 seconds, press the [1], [2], [5],
[3], and [0] buttons.
Search
Press the Play [ ] or [ENTER]
button to start playback of the
specified chapter or title.
During playback, you can select other
chapters by using the Next [
] and
Previous [
] buttons.
Disc
1: DVD-VIDEO
Title
1 : 25 : 30
To enter, for example, 2 minutes, 15
seconds, press the [2], [1], and [5] buttons.
Search
Disc
1: DVD-VIDEO
Notes:
• You can also select chapters by using the number buttons, without opening the Search window.
• If the current DVD-Video disc contains only one title,
you won’t be able to select other titles. Similarly, if it
contains no chapters, you won’t be able to select chapters.
• DVD-Video discs usually have onscreen menus for
selecting titles and chapters (see page 26).
• With some discs you may not be able to select titles
and chapters as described here.
3
Remote controller
Title
0 : 02 : 15
Press the Play [ ] button to
locate the specified point.
Playback starts from the specified
point.
Notes:
• The Time Search function works only within the currently playing title (DVD-Video) or track (audio CD).
For example, if the current title is one hour long and
you enter the time 1 hour, 30 minutes, nothing will
happen.
• In some cases, playback may start from a slightly different point to the one you specified.
• Time Search may not work with some discs.
• You can’t use the [SEARCH] button during random
playback, memory playback, or party mode playback.
29
Basic Playback—Continued
Number
buttons
Frame-by-Frame Playback
SEARCH
DVD
With the Frame-by-Frame Playback function, you can
forward playback one frame at a time.
1
Remote controller
PAUSE
Press the Pause [ ] button to
pause playback, and then press
the Pause [ ] button repeatedly
to forward playback one frame at
a time.
PLAY
2
To resume normal playback,
press the Play [ ] button.
Remote controller
Fast Forward & Reverse
DVD
CD
MP3
The section explains how to fast forward and reverse.
■ Fast
forward
Remote controller
Remote controller
■ Fast
reverse
Remote controller
Remote controller
During playback, press the Fast
Forward [ ] button to start fast
forward.
Playback fast forwards and “x 2”
appears onscreen.
To change the fast-forward speed, press
the Fast Forward [ ] button repeatedly to select: x 2, x 4, x 8, or x 16.
To resume normal playback,
press the Play [ ] button.
During playback, press the Fast
Reverse [ ] button to start fast
reverse.
Playback reverses and “x 2” appears
onscreen.
To change the fast-reverse speed, press
the Fast Reverse [ ] button repeatedly to select: x 2, x 4, x 8, or x 16.
To resume normal playback,
press the Play [ ] button.
Notes:
• No sound is output during fast forward or fast reverse
of a DVD-Video or MP3 disc.
• Fast forward and fast reverse cannot be used with
WMA files.
30
Notes:
• No sound is output during frame-by-frame playback.
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t display the same
frame for too long. Your DV-CP704 features a screen
saver to protect your TV from the effects of burn-in
(page 46).
Basic Playback—Continued
Slow-motion Playback
You can adjust the brightness of the display as follows.
DVD
With the Slow-motion Playback function you can watch
a scene slowly either forward or backward.
■ Forward
slow
motion
Remote controller
During playback, press the
SLOW [ ] button.
Forward slow-motion playback starts
and “ 1/2” appears onscreen.
To change the slow-motion speed, press
the SLOW Forward [ ] button repeatedly to select: 1/2, 1/4, 1/6, or 1/8.
■ Backward During playback, press the
slow
SLOW [ ] button.
motion
Backward slow-motion playback starts
and “ 1/2” appears onscreen.
Remote controller
To change the slow-motion speed, press
the SLOW Back [ ] button repeatedly
to select: 1/2, 1/4, 1/6, or 1/8.
■ Resume
playback
Adjusting the Display Brightness
1
Press the [DIMMER] button
repeatedly to cycle through the
following options:
Disc tray light off + normal brightness
Disc tray light off + dim
Disc tray light off + dimmer
Disc tray light on + normal brightness
Notes:
• When the display brightness on another Onkyo AV
component connected via
is changed, the “disc
tray light off” option might not work.
• Even if you selected the “disc tray light off” option,
the disc tray light will come on when the disc tray is
opened.
To resume normal playback,
press the Play [ ] button.
Remote controller
Notes:
• No sound is output during slow-motion playback.
• The slow-motion speed indication is only approximate, and the actual speed will vary from disc to disc.
31
Basic Playback—Continued
To pause the slideshow, press the [ ]
button. Press the Play [ ] button to
resume.
To zoom in or out, use the Fast Forward
[ ] and Fast Reverse [ ] buttons.
Use the Left/Right [ ]/[ ] and Up/
Down [ ]/[ ] buttons to move around
the picture while zoomed in. To cancel
the zoom, press the Play [ ] button.
To return to the navigation window,
press the [MENU] button.
To view the thumbnail display, press
the [TOP MENU] button.
Use the Next [
] and Previous [
]
buttons to display the next or previous
thumbnail page.
PAUSE
STOP
PLAY
ENTER
TOP MENU
MENU
Using JPEG CDs
3
The DV-CP704 supports JPEG CDs, so you can view
your photos on TV either individually or as a slideshow.
1
Load and select a CD containing
JPEG pictures.
The slideshow starts automatically.
See “Using the Disc Navigation Window” on page 27.
With some JPEG discs, the first nine
pictures automatically appear onscreen
at thumbnail-size when the disc is
selected.
Use the Next [
] and Previous [
]
buttons to display the next or previous
thumbnail page.
Use the [ ], [ ], [ ], [ ] buttons to
select a picture, and then press the Play
[ ] or [ENTER] button to start the
slideshow.
2
32
You can use the following functions during the slideshow:
To display the next or previous picture,
use the Next [
] and Previous [
]
buttons.
To turn a picture upside down, use the
Up/Down [ ]/[ ] buttons (not while
zoomed in).
To rotate a picture clockwise or counterclockwise, use the Left/Right [ ]/
[ ] buttons (not while zoomed in).
Remote controller
To stop the slideshow, press the
Stop [ ] or [MENU] button.
Depending on the type of JPEG disc,
either the first nine pictures appear in
thumbnail-size or the disc navigation
window appears.
The slideshow stops automatically
when all pictures have been displayed.
Notes:
• You can view JPEG images in high definition by
changing the HD JPEG mode setting (see page 44).
• The Memory and Random functions cannot be used
with JPEG files.
Basic Playback—Continued
CHAIN MODE
PARTY MODE
Using Chain Mode
DVD
CD
MP3
WMA
With the Chain mode function, you can play all discs, all
DVD-Video discs, or all audio CDs and MP3/WMA
discs consecutively as if they were one big disc.
1
Remote controller
2
Remote controller
Press the [CHAIN MODE] button
repeatedly to select CD, DVD, or
ALL.
The CHAIN MODE indicator flashes
on the display.
ALL:
All discs are played consecutively.
DVD:
All DVD-Video discs are played
consecutively.
CD:
All audio CDs, including MP3 and
WMA discs, are played consecutively.
To cancel Chain mode, press the
[CHAIN MODE] button repeatedly
until the CHAIN MODE indicator disappears.
Using Party Mode
CD
MP3
WMA
With the Party mode function, you can play all of the
audio CDs and MP3/WMA discs in random order.
Remote controller
Press the [PARTY MODE] button.
The CHAIN MODE and CD indicators
appear.
All loaded audio discs, including MP3
and WMA discs, are played in random
order.
Press the Stop [ ] button to stop Party
mode playback and cancel the Party
mode function.
While the CHAIN MODE indicator
is flashing, press the Play [ ]
button to start Chain mode playback.
The Chain mode function will be cancelled if you do not start playback
within 5 seconds of pressing the
[CHAIN MODE] button.
Note:
• JPEG files are skipped during Chain mode playback.
• With the DVD and All Chain modes, DVD-Video
menus are ignored and titles are played automatically.
This may not work with some discs.
• You can’t use the repeat functions with Chain mode.
• You can use the Random function with Chain mode.
33
Advanced Playback
REPEAT
PLAY
SEARCH
REPEAT
A-B
Notes:
• Repeat Playback may not work with some
DVD-Video discs.
• If you press the [REPEAT] button while the Memory
Playback function is on (see page 36), the current
memory list will play repeatedly.
• The Repeat function cannot be used with Chain mode
or Party mode.
• If you select another disc, repeat playback is cancelled.
• The Repeat function can be used in combination with
the Random function (see page 35).
RANDOM
A–B Repeat Playback
DVD
CD
MP3
With the A–B Repeat Playback function you can play a
specified section over-and-over again.
1
Remote controller
Repeat Playback
DVD
CD
MP3
WMA
JPEG
With the Repeat Playback function you can play the current disc, title, chapter, track, or folder of MP3/WMA
files over-and-over again.
1
Remote controller
2
Remote controller
3
Remote controller
34
During playback, press the [A–B]
button to set the A point (i.e., the
start of the section you want to
repeat).
“Repeat A–” appears onscreen.
Press the [REPEAT] button
repeatedly to select a repeat
option.
The currently selected repeat option
appears onscreen and “REPEAT”
appears on the display.
The available options depend on the
current disc type, as follows:
DVD-Video:
Chapter, Title, 1 Disc, All Disc.
Audio CD:
Track, 1 Disc, All Disc.
MP3/WMA/JPEG:
Track, Folder, 1 Disc, All Disc.
Press the Play [ ] button to start
repeat playback.
To cancel Repeat Playback, use
the [REPEAT] button to select
Off.
2
Remote controller
3
Remote controller
Press the [A–B] button again to
set the B point (i.e., the end of the
section you want to repeat).
Playback repeats between the A and B
points, and “Repeat A–B” appears
onscreen.
To cancel A–B Repeat Playback,
press the [A–B] button to select
Off.
Notes:
• A–B Repeat Playback may not work with some
DVD-Video discs.
• In some cases, the A and B points may be at slightly
different points to the ones you specified.
Advanced Playback—Continued
Random Playback
DVD
CD
MP3
WMA
With the Random Playback function you can enjoy a
random selection of discs, titles, chapters, tracks, or
MP3/WMA folders.
1
Select a disc.
See page 24.
2
Press the [RANDOM] button
repeatedly to select a random
option.
The currently selected random option
appears onscreen.
The available options depend on the
current disc type, as follows:
DVD-Video:
Title, 1 Disc, All Disc.
Audio CD:
1 Disc, All Disc.
MP3/WMA:
Folder (files in subfolders are not
played), 1 Disc, All Disc.
With the “Title” option, chapters within
the current title are played at random.
With the “1 Disc” option, all titles,
chapters, tracks, and folders on the current disc are played at random.
If you press the [RANDOM] button
during playback, random playback
begins after the current chapter, or track
has finished.
Remote controller
3
• You can’t use the [SEARCH] button during random
playback.
• During random playback, the remote controller’s navigation [ ], [ ], [ ], [ ] buttons and number buttons
cannot be used with the disc navigation window.
• If you select another disc, random playback is cancelled, except when the random option is set to “All
Disc,” in which case playback continues.
• The Random Playback function can be combined with
the Repeat Playback function.
Press the Play [ ] button to start
random playback.
Random playback starts.
Remote controller
4
Remote controller
To cancel random playback, use
the [RANDOM] button to select
Off.
Notes:
• To select the next random disc, title, chapter, track, or
MP3/WMA folder during random playback, press the
Next [
] button.
• Random playback may not work with some
DVD-Video discs.
• Random playback cannot be used with the Memory
Playback function.
35
Advanced Playback—Continued
3
Remote controller
Number
buttons
Press the [ENTER] button.
The new item is added to the memory
list as step 01.
MEMORY
Memory List
No.
CLR
ANGLE
Disc
Title/Folder
Chapter/Track
1
001 / 002
--- / 008
01
02
1
-
001 / 002
--- / ---
005 / 008
--- / ---
03
-
--- / ---
--- / ---
04
-
--- / ---
--- / ---
05
-
--- / ---
--- / ---
ENTER
CD
MP3
Remote controller
5
To play the memory list, press
the Play [ ] button.
WMA
With the Memory Playback function, you can create
your own memory list of up to 32 titles, chapters, or
tracks.
1
Repeat steps 2 and 3 to add more
items to the memory list.
New items will be added to the memory
list as steps 02, 03, and so on.
Remote controller
Memory Playback
DVD
4
6
Remote controller
To stop playback, press the Stop
[ ] button.
Press the [MEMORY] button.
The Memory List window appears
onscreen, as shown.
Memory List
No.
01
02
03
04
05
Disc
Title/Folder
1
001 / 002
-
--- / ----- / ----- / ----- / ----- / ---
Chapter/Track
--- / 008
--- / ----- / ----- / ----- / ----- / ---
Inserting New Items in the List
Remote controller
The top row ( ) is used to enter disc,
title/folder, and chapter/track numbers.
Steps in the memory list are numbered.
2
Remote controller
36
Enter the disc, title/folder, and
chapter/track numbers of the
item you want to add to the memory list.
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parameters, and use the number buttons to
select Title/Folder or Chapter/Track.
The number of the currently selected
disc is already entered.
To add all of the titles, folders, chapters,
or tracks on the disc, press the [+10]
button.
To insert a new item into the
memory list, use the Up/Down
[ ]/[ ] buttons to select the step
before which you want to insert
the new item, and then press the
[ENTER] button.
Memory List
No.
01
02
03
04
05
Remote controller
Disc
Title/Folder
Chapter/Track
1
001 / 002
--- / 008
1
1
3
-
001 / 002
--- / --001 / 002
001 / ----- / ---
005 / 008
--- / --003 / 008
--- / 008
--- / ---
Enter the disc, title/folder, and
chapter/track numbers of the
item to be inserted.
Press the [ENTER] button.
The new item is inserted into the memory list and subsequent items move
down the list.
Advanced Playback—Continued
Deleting Items from the List
Remote controller
To delete an item, use the Up/
Down [ ]/[ ] buttons to select it,
and then press the [CLR] button.
The item is deleted and subsequent
items move up the list.
Selecting Camera Angles
DVD
Some DVD-Video discs feature multiple camera angles
that allows you to view scenes from different angles. If
the currently playing DVD-Video disc features multiple
camera angles, the camera indicator appears onscreen
and on the display. Such a disc usually has the multiple
camera angle logo ( ) printed on its sleeve notes.
Remote controller
Editing Steps
1
Remote controller
2
Remote controller
To edit a step, use the Up/Down
[ ]/[ ] buttons to select it, edit
the disc, title/folder, and chapter/
track numbers, and then press
the [ENTER] button.
To close the Memory Play Setup
window, press the [RETURN] button.
Press the [ANGLE] button
repeatedly to cycle through the
available camera angles.
The number of the currently selected
camera angle appears onscreen. For
example, on a disc with three camera
angles, you’d see 1/3, 2/3, and 3/3.
Notes:
• With some DVD-Video discs you may not be able to
select different camera angles even though the camera
indicator is displayed.
• With some DVD-Video discs you can select camera
angles from a menu.
• Some DVD-Video discs won’t allow you to select different camera angles while playback is paused.
• Deleting the memory list:
Press the Stop button to stop playback of the memory
list, and while “Memory” is displayed onscreen, press
the [CLR] button. The memory list is deleted and
“Memory Clear” is displayed onscreen.
Notes:
• The entire memory list is cleared when the DV-CP704
is set to Standby.
37
Advanced Playback—Continued
Selecting Subtitles
DVD
Some DVD-Video discs feature subtitles in several languages. See the disc’s sleeve notes for details.
AUDIO
SUBTITLE
Selecting Languages & Audio
Formats
DVD
Some DVD-Video discs feature soundtracks in several
languages and audio formats (e.g., Dolby Digital or
DTS). Music DVD-Video discs sometimes feature
soundtracks in several audio formats, such as PCM or
Dolby Digital 5.1. See the disc’s sleeve notes for details.
Remote controller
During playback, press the
[AUDIO] button repeatedly to
cycle through the available
soundtracks.
The name of the selected soundtrack
appears onscreen for several seconds.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 25), or select
another disc, the soundtrack language will revert to
your default language (see page 46), or the disc’s
default language.
• With some discs, selecting another soundtrack may
cause the picture to skip momentarily.
• With some DVD-Video discs you need to select
soundtracks from a menu, and you may not be able to
select other soundtracks during playback.
38
Remote controller
During playback, press the [SUBTITLE] button repeatedly to cycle
through the available subtitles.
The name of the selected subtitle
appears onscreen for several seconds.
To turn off subtitles, use the [SUBTITLE] button to select Off.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 25), or select
another disc, the subtitle language will revert to your
default subtile language (see page 46), or the disc’s
default subtitle language.
• With some DVD-Video discs you can select subtitles
from a menu, and you may not be able to select subtitles during playback.
• To check the subtitle language currently selected,
press the [SUBTITLE] button once. The current setting will appear onscreen for several seconds.
Advanced Playback—Continued
RESOLUTION
Setting the HDMI
This section explains how to turn HDMI on and off and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
1
Press the [RESOLUTION] button
to turn HDMI on or off.
If HDMI is off, “HDMI OFF” appears
on the display the first time the button is
pressed. Press the button again while
“HDMI OFF” is displayed to turn on
HDMI.
To turn off HDMI, press and hold the
[RESOLUTION] button.
2
Press the [RESOLUTION] button
on the remote controller repeatedly to change the HDMI resolution.
The fist button press displays the current resolution onscreen. Press the button again while the resolution is
displayed to change the setting. The
DV-CP704 supports the following resolutions:
Auto:
The resolution is automatically set
to the native resolution of the TV
connected to the HDMI OUT.
Depending on the resolution setting on the TV, the DV-CP704 may
not output video from its analog
video outputs.
Remote controller
480p(480p/576p):
The setting displayed depends on
the country in which you purchased
the DV-CP704.
720 × 480p 60Hz or 720 × 576p
50Hz
Also output by the DV-CP704’s
analog video outputs.
720p:
1280 × 720p 50/60Hz
Not output by the DV-CP704’s analog video outputs.
1080i:
1920 × 1080i 50/60Hz
Not output by the DV-CP704’s analog video outputs.
Tip:
These settings can also be changed by using the onscreen
setup menus (see page 44).
Notes:
• Depending on your setup, you may find that there’s no
picture when you turn on HDMI. In this case, you
need to check the HDMI resolution setting and your
TV’s settings. If there is no picture, press the [RESOLUTION] button repeatedly until the picture reappears.
• While HDMI is on and the resolution is set to 480p
(480p/576p), the component video output is fixed at
progressive video.
39
Advanced Playback—Continued
LAST MEMORY
STOP
PLAY
ENTER
Using Last Memory
DVD
With the Last Memory function you can resume playback from where you left off even if another disc has
been selected or the disc has been removed. Last Memory also remembers the soundtrack and subtitle languages that you were using.
1
Remote controller
2
Remote controller
3
Remote controller
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the display.
If the [LAST MEMORY] button is
pressed again, the last memory point
will be updated.
To stop playback, press the Stop
[ ] button once or twice.
At this point you may choose to
play another disc, or to turn off
the DV-CP704.
To resume playback, select the
disc and press the Play [ ] button.
The Last Memory dialog box appears,
as shown.
Last Memory is set.
Start playback from memory location ?
Yes
40
No
Memory Clear
4
Remote controller
To resume playback from last
memory point, select “Yes,” and
then press [ENTER].
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s settings are lost.
• The Last Memory function will not work while a
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVD-Video discs.
• Even if you select another disc, or inadvertently turn
off the DV-CP704 during playback, you can resume
playback from the same point when you select the disc
again.
Advanced Playback—Continued
Displaying Information
DVD
You can display various information about the current
disc, title, chapter, or track as follows.
DISPLAY
1
DISPLAY
ZOOM
Remote controller
Zooming
DVD-V
JPEG
With the Zoom function you can enlarge any part of the
picture.
1
Remote controller
2
Remote controller
3
Remote controller
During playback or paused,
press and hold the [ZOOM] button.
The picture is enlarged.
Press the [ZOOM] again repeatedly to Zoom in.
The number of zoom steps available
depends on the resolution of the disc or
file.
After the maximum zoom, the picture
returns to its normal size.
To see other areas of the picture
while zoomed, use the remote
controller’s arrow [ ], [ ], [ ],
[ ] buttons.
Notes:
• During a JPEG slideshow, you can use the Fast Forward [ ] and Fast Reverse [ ] buttons to zoom in
and out.
• The Zoom function may not work with some DVDs.
• The Zoom function can also be used while playback is
paused or during slow-motion playback.
• The Zoom function cannot be used with HD JPEG.
2
Remote controller
3
During playback, press the [DISPLAY] button.
Various information appears onscreen.
The operating status (e.g., Stop, Play,
Resume), disc number, and disc type
information is displayed along the top
of the screen.
DVD-Video:
Current title number, total number
of titles on disc, elapsed title time,
remaining title time, total title time,
selected soundtrack, selected subtitle, and the number of available
camera angles.
Press the [DISPLAY] button
again to see more information.
DVD-Video: Current chapter number,
total number of chapters in title,
elapsed chapter time, remaining chapter time, total chapter time.
Press the [DISPLAY] button
again to cancel the information
display.
Remote controller
■ For audio CDs:
Pressing the [DISPLAY] button repeatedly during playback will display the following information:
• Elapsed track time (onscreen, the elapsed track time
and remaining track time will be displayed)
• Remaining track time
• Elapsed disc time (onscreen, the elapsed disc time and
remaining disc time will be displayed)
• Remaining disc time
■ For MP3 and WMA discs:
Pressing the [DISPLAY] button repeatedly during playback will display the following information:
• Elapsed track time
• Track name
• Folder name
• Total number of folders
41
Configuring the DV-CP704
This chapter explains the various functions and settings of the onscreen setup menus.
Functions and settings are arranged into six menus: Picture, Audio, Language, Display, Operation Setting, and Initial.
The following table lists all the functions and settings, with a brief description and page number where you can find full
details.
Menu
Picture
Audio
Language
Display
Operation
Setting
Initial Setup
Setting
Description
TV Shape
Select the aspect ratio that matches your TV.
43
View Mode
Stretch the picture to fit your TV screen.
44
HDMI Output Setting
Turn HDMI video output on or off.
44
Progressive Setting
Set the component video output to progressive or interlaced.
44
HD Resolution
Select the video resolution for the HDMI OUT.
44
HD JPEG mode
For displaying JPEG images at a high resolution on a HDTV.
44
Video Black Level
Choose a video black level.
45
Brightness
Adjust the picture brightness.
45
Sharpness
Adjust the picture sharpness.
45
PAL Output Setting
Convert the disc’s video format.
45
Digital/HDMI Audio Out
Settings for the digital signal output by the optical, coaxial, and
HDMI digital audio outputs.
45
Linear PCM Out
Select whether or not the DV-CP704 downsamples 96 kHz digital audio.
45
Dynamic Range Control
Set the Dynamic Range function.
45
On-Screen Language
Select a language for the onscreen setup menus and messages.
46
Disc Menu Language
Select your preferred language for disc menus.
46
Audio Language
Select your preferred language for soundtracks.
46
Subtitle Language
Select your preferred language for subtitles.
46
On-Screen Display
Turn on or off onscreen messages and indicators.
46
On-Screen Display Color
Select a color for onscreen setup menus and messages.
46
Background
Select a background color for when playback is stopped.
46
Screen Saver
Set the Screen Saver function.
46
Parental Lock
Set the Parental Lock function.
47
Security Code
Change a security code for use with parental lock.
47
Auto Power Off
Sets the Auto power off function.
46
This menu appears automatically the very first time you turn on
your DV-CP704. (These settings are available in other menus.)
22
TV Shape
HDMI Output Setting
On-Screen Language
42
Page #
Configuring the DV-CP704—Continued
6
Remote controller
ENTER
When you’ve finished, press the
[SETUP] button again.
The onscreen setup menu closes.
SETUP
Picture Menu
Using the Onscreen Setup Menus
This section explains how to use the onscreen setup
menus.
1
Turn on your DV-CP704 and TV.
On your TV, select the video input to
which the DV-CP704 is connected.
2
Press the [SETUP] button.
The onscreen setup menu appears, as
shown.
Remote controller
Picture
3
Remote controller
4
Remote controller
5
Remote controller
TV Shape
: 4:3 Letter box
View Mode
: Normal
HDMI Output Setting
: Off
Progressive Setting
: Interlace
HD Resolution
: Auto
HD Jpeg mode
: Off
Video Black Level
: Light
Brightness
: Level 4
Sharpness
: Level 4
Use the remote controller’s navigation buttons to navigate the
menus.
Use the Left/Right [ ]/[ ] buttons to
move left or right. Use the Up/Down
[ ]/[ ] buttons to move up or down.
When you’ve selected an item,
press the [ENTER] button to see
the available options.
Use the navigation buttons to
select the options, and press the
[ENTER] button to confirm your
selection.
Press the [RETURN] button to go back
one step.
TV Shape
With this setting you can select a picture format to match
the aspect ratio of your TV.
4:3 Letter box (default): Choose
this option if you have a standard
TV (4:3 aspect ratio). When you
watch widescreen DVD-Video
movies, the entire picture will be
visible and there will be black
bars at the top and bottom of the screen, as shown.
4:3 Pan & Scan: Choose this
option if you have a standard TV
(4:3 aspect ratio) and want to use
the full height of the screen when
watching widescreen
DVD-Video movies. In order to
use the full height of the screen, the picture will be
cropped on both sides, as shown. This option won’t
work with discs that don’t support pan and scan.
16:9 Widescreen: Choose this option if you have a
widescreen TV (16:9 aspect ratio). Depends on TV,
the picture appears stretched when watching programs
in 4:3 format.
16:9 Compressed: Choose
this option if you have a
widescreen TV (16:9 aspect
ratio) and the picture appears
stretched when watching programs in 4:3 format. Some
widescreen TVs have a setting to correct this. If your
TV doesn’t, and 4:3 programs appear stretched, select
this option to correct the problem.
Notes:
• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of 720p
or 1080i, programs in 4:3 format will appear stretched,
so we recommend that you select the 16:9 Compressed option.
• With some DVD-Video discs this setting may have no
effect. See the disc’s sleeve notes to see which picture
format is used.
43
Configuring the DV-CP704—Continued
View Mode
HD Resolution
With this setting you can adjust the aspect of the picture
so that it fits your TV screen. Due to your TV’s aspect
ratio setting and the DVD’s aspect ratio, black bars may
appear above and below the picture or at the sides and the
aspect of the picture may be unsuitable. In this case, use
this setting to adjust the aspect of the picture as you like.
With this setting you can set the video resolution for the
HDMI OUT.
Normal (default): The picture is displayed in its
original aspect ratio.
View Mode 1: The picture is stretched horizontally
to make it fit the height of the screen.
View Mode 2: The picture is stretched vertically to
make it fit the width of the screen.
View Mode 3: The picture is stretched horizontally
and vertically to make it fit the screen.
Tip:
The view mode can also be changed by using
the remote controller’s [ASPECT] button.
Note:
• This setting does not apply to DVD menus.
HDMI Output Setting
With this setting you can turn the HDMI video output on
or off. See page 39 for more information.
On (default): Video is output by the HDMI OUT.
Off: Video is not output by the HDMI OUT.
Note:
• When this setting is set to On, video is output by the
analog video outputs only when the HD Resolution is
set to 480p/576p.
Progressive Setting
With this setting you can set the component video output
to progressive or interlaced. While the HDMI Output Setting is set to On, this setting is fixed at Progressive and
cannot be changed. See page 39 for more information.
Interlaced: Component video output is interlaced.
Progressive: Component video output is progressive.
Note:
• This setting can also be changed by pressing and holding the Previous [
] button, and then pressing
[STANDBY/ON] button.
44
Auto: The resolution is automatically set to the
native resolution of the TV connected to the HDMI
OUT.
480p (480p/576p) (default): The setting displayed
depends on the country in which you purchased the
DV-CP704.
720 x 480p 60 Hz or 720 x 576p 50 Hz
720p: 1280 x 720p 50/60 Hz
1080i: 1920 x 1080i 50/60 Hz
Tip:
When the HDMI Output Setting is set to On, you can
also change this setting by using the remote controller’s
[RESOLUTION] button (see page 39).
Notes:
• Initially, the DV-CP704 is configured to output both
HDMI and analog video. However, if after changing
the resolution settings there’s no picture, with the analog video connection or HDMI connection in place,
press the [RESOLUTION] button repeatedly to
restore the picture.
• If Auto selected but the DV-CP704 doesn’t support the
TV’s native resolution, the resolution will be 480p/
576p.
• When the resolution is set to 720p or 1080i, no video
is output by the analog video outputs.
HD JPEG mode
If your TV is connected to the HDMI OUT and the
HDMI resolution is set to 720p or 1080i, this setting
allows you to display your JPEG pictures in high definition.
On: JPEG pictures displayed in high definition.
Off: JPEG pictures displayed as normal.
Notes:
• If your TV is connected to a video output other than
the HDMI OUT, or the HD Resolution set to something other than 720p or 1080i, even if this setting is
set to On, your JPEG pictures will not be displayed in
high definition.
• When using HD JPEG, it may take a while to display
each picture. And the Zoom function cannot be used.
Also, onscreen status messages such as “Play” and
“Stop” are not displayed.
Configuring the DV-CP704—Continued
Video Black Level
With this setting you can adjust the picture blackness of
analog video output.
Audio Menu
Digital/HDMI Audio Out
Light: Blacks are lighter, and the entire picture
becomes lighter.
With this setting you can configure the optical, coaxial,
and HDMI digital outputs.
Dark: Blacks are darker, and the entire picture
becomes darker.
All: Dolby Digital and DTS signals are output as
they are.
Brightness
PCM: Dolby Digital signals are down mixed to 2
channels and output as PCM.
With this setting you can adjust the picture brightness.
Off: No digital signals are output.
Level 1-7: 1 is the darkest. 7 is the brightest. The
default brightness is 4 (standard).
Sharpness
With this setting you can adjust the picture sharpness.
Level 1-7: 1 is the softest. 7 is the sharpest. The
default sharpness is 4 (standard).
PAL Output Setting (Australian model only)
With this setting you can specify how the DV-CP704
outputs video signals when playing NTSC format
DVD-Video discs.
AUTO (default): Use this option to watch PAL and
NTSC format discs. The DV-CP704 does not convert
the video format. When you play a PAL disc, the
video output will be PAL format. And when you play
an NTSC disc, it’ll be NTSC format. Your TV must
support NTSC playback in order to watch NTSC format discs.
NTSC: Use this option if you want to play only
NTSC format discs.
PAL: Use this option if your TV doesn’t support
NTSC playback, or the picture is distorted when
watching NTSC discs. The DV-CP704 will convert
NTSC format video signals to PAL-compatible format.
Notes:
• This setting can be changed only when playback is
stopped.
• This setting can also be changed by pressing and holding the Next
button, and then pressing
[STANDBY/ON] button.
Linear PCM Out
With this setting you can configure the DV-CP704 to
output digital audio with higher sampling rates (e.g.,
96 kHz) as it is or down sample it to 48 kHz.
If the AV component you connect to the DV-CP704’s
digital audio outputs supports 96 kHz digital audio,
select Down Sample Off. Otherwise, select Down Sample On.
Down Sample On (default): 96 kHz digital audio is
down sampled and output at 48 kHz.
Down Sample Off: 96 kHz digital audio is output as
it is.
Notes:
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for A/D conversion to the
analog audio outputs.
• With some discs, even if you select Down Sample Off,
the digital audio will be down sampled to 48 kHz, and
in some cases may not be output by the DV-CP704’s
digital audio outputs.
Dynamic Range Control (Dolby Digital
only)
With the Dynamic Range Control function you can
reduce the dynamic range of Dolby Digital material so
that you can still hear quiet parts even when listening at
low volume levels—ideal for watching movies late at
night when you don’t want to disturb anyone.
Off (default): The full dynamic range is preserved.
On: The dynamic range of Dolby Digital material is
compressed.
Notes:
• The impact of the Dynamic Range Control function
depends on the Dolby Digital material that you are
playing and with some material there will be little or
no effect.
• When the DV-CP704 is set to Standby, this function is
automatically set to off.
45
Configuring the DV-CP704—Continued
Language Menu
• With some DVD-Video discs you can select subtitles
from a menu.
On-Screen Language
On-Screen Display
Disc Menu Language
With this setting you can turn on or off onscreen messages, such as “Play,” “Stop,” and “Resume.”
With this setting you can select your preferred language
for disc menus. When you play a DVD-Video disc with
multiple language disc menus, your preferred language
will be selected automatically.
Select “Others” if you can’t find your language displayed. See “Selecting Other Languages” on page 48.
Notes:
• Not all DVD-Video discs have menus in multiple languages.
• Even if a DVD-Video disc has menus in multiple languages, this setting may not always work.
• If a DVD has only one menu language, that will be
used.
• With some DVD-Video discs you can select languages
from a menu.
Audio Language
With this setting you can select your preferred language
for soundtracks. When you play a DVD-Video disc with
multiple language soundtracks, your preferred language
will be selected automatically.
Select “Others” if you can’t find your language displayed. See “Selecting Other Languages” on page 48.
Notes:
• Not all DVD-Video discs have soundtracks in multiple
languages.
• Even if a DVD-Video disc has soundtracks in multiple
languages, this setting may not always work.
• If a DVD has only one soundtrack, that will be used.
• With some DVD-Video discs you can select languages
from a menu.
Subtitle Language
With this setting you can select your preferred language
for subtitles. When you play a DVD-Video disc with
multiple language subtitles, your preferred language will
be selected automatically.
Select “No Subtitle” if you don’t want subtitles displayed. Select “Others” if you can’t find your language.
See “Selecting Other Languages” on page 48.
Notes:
• Not all DVD-Video discs have subtitles.
• Even if a DVD-Video disc has subtitles in multiple
languages, this setting may not always work.
• If a DVD has only one subtitle language, that will be
used.
46
Display Menu
With this setting you can select a language for the
onscreen setup menus and messages.
Select one of the displayed language.
Off: Onscreen messages are not displayed.
On (default): Onscreen messages are displayed.
On-Screen Display Color
With this setting you can set the color and theme of the
Disc navigation window.
Sapphire (default):
Pearl:
Amethyst:
Garnet:
Background
With this setting you can select the color of the background that’s displayed when the DV-CP704 is stopped.
Blue:
Gray:
Graphic (default): The theme picture specified for
the On-Screen Display Color setting is used.
Screen Saver
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
Off: Screen saver off.
On (default): Screen saver on.
When the Screen Saver function is set to On, and
DVD-Video playback is stopped for 15 minutes, the
Screen Saver function automatically displays a moving
image.
Once the screen saver has been activated, you can cancel
it by pressing the Play [ ] button.
Note:
• The Screen Saver function also works with audio CDs
and MP3/WMA discs.
Auto Power Off
The Auto power off function automatically turns off the
DV-CP704 after 20 minutes of inactivity.
Configuring the DV-CP704—Continued
Operating Setting Menu
Parental Lock
With the Parental Lock function you can block access to
certain scenes that the authors have flagged as being
unsuitable for children.
To use parental lock, you must set a security code.
1
Select “Operation Setting” menu
in the setup.
2
Use the Up/Down [ ]/[ ] buttons
to select “Parental Lock”, and
then press the [ENTER] button.
The security code input screen appears.
Remote controller
3
Remote controller
4
Remote controller
• Not all discs use parental lock. See the disc’s sleeve
notes for details.
• Discs with parental lock may cut certain scenes,
replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.
Change the Security Code
To change the Security Code, confirm your existing code
then enter a new one.
1
Select “Operation Setting” menu
in the setup.
2
Use the Up/Down [ ]/[ ] buttons
to select “Security Code”, and
then press the [ENTER] button.
The security code input screen appears.
Remote controller
Enter the security code using the
remote controller’s number buttons, and then press the [ENTER]
button.
The default security code is “8888.”
You can change the security code in the
next step.
Remote controller
Use the Up/Down [ ]/[ ] buttons
to change the level of parental
lock, and then press the [ENTER]
button.
At level 8 parental lock is off, with level
1 being the strictest level.
Remote controller
Notes:
• When entering a security code, you can use the [CLR]
button to delete the numbers entered so far, if necessary.
3
4
Enter the existing security code
using the remote controller’s
number buttons, and then press
the [ENTER] button.
The default security code is “8888.”
Even if a new security code has been
entered, the code “8888” can still be
used.
Once the security code has been
entered, the new security code input
screen appears.
Enter the new security code
using the remote controller’s
number buttons, and then press
the [ENTER] button.
The new security code has been set.
Note:
• If you forget your security code, enter “8888” instead.
“8888” is a security code that can always be used.
47
Configuring the DV-CP704—Continued
Initial Setup Menu
This menu appears automatically the very first time you
turn on the DV-CP704. See “First Time Setup” on
page 22 for more information.
TV Shape—see page 43
HDMI Output Setting—see page 44
On-Screen Language—see page 46
Selecting Other Languages
This section explains how to select other languages for
disc menus, audio, and subtitles.
1
Remote controller
2
Remote controller
3
Remote controller
Select “Others” from the Disc
Menu Language, Audio Language, or Subtitle menu, and
then press [ENTER].
The language code boxes appear.
Use the remote controller’s Left/
Right [ ]/[ ] buttons to select the
code boxes.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
See adjacent table for language codes.
When you’ve finished, press the
[ENTER] button.
Language Code List
Use this list when specifying other languages.
Language
Japanese
English
French
German
Italian
Spanish
Chinese
Dutch
Portuguese
Swedish
Russian
Korean
Greek
Afar
Abkhazian
48
Code
JA
EN
FR
DE
IT
ES
ZH
NL
PT
SV
RU
KO
EL
AA
AB
Language
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Code
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
Language
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots-Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Code
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
Language
Burmese
Nauru
Nepali
Norwegian
Occitan
Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Romanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Sinhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Code
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Troubleshooting
Symptom
Possible cause
The power cord is not connected.
Can’t turn
on the
DV-CP704?
External interference is affecting the DV-CP704’s digital circuitry.
The wrong input source is selected on your TV.
The video cable is not connected properly.
No HDMI Video Output?
The HDMI Output Setting is set to Off.
Your TV doesn’t support HDMI Resolution settings of
720p and 1080i.
Remedy
Connect the power cord to a suitable wall outlet
(page 22).
Turn off the DV-CP704, wait five seconds, then try turning
it on again. If that fails, disconnect the power cord from the
wall outlet, wait 10 seconds, reconnect it, then try turning it
on again.
On your TV, select the input to which the DV-CP704 is
connected (page 22).
Check the video cable and correct as necessary (page 18).
Try pressing the [RESOLUTION] button on the remote
controller repeatedly to switch the HDMI OUT on, and
then pressing the [RESOLUTION] button repeatedly to
get picture (page 39).
No Component Video Output?
Your TV does not support progressive scanning, and
the HDMI OUT is on.
No picture?
While the HDMI OUT is on, the component video output outputs progressive video.
The HDMI Resolution is not set to 480p (480p/576p).
Press and hold down the remote controller’s [RESOLUTION] button to turn off the HDMI OUT (page 39).
Make sure the PRGV indicator is not on.
Press and hold down the remote controller’s [RESOLUTION] button to turn off the HDMI OUT, and then set the
progressive Setting on the onscreen setup menus to Interlaced (page 39, 44). Make sure the PRGV indicator is not
on.
Press the remote controller’s [RESOLUTION] button
repeatedly to change the resolution (page 39).
Press and hold down the remote controller’s [RESOLUTION] button to turn off the HDMI OUT, and then set the
progressive Setting on the onscreen setup menus to Interlaced (page 39, 44). Make sure the PRGV indicator is not
on.
No S-Video or Composite Video Output?
The HDMI Resolution is not set to 480p (480p/576p).
The wrong input source is selected on your hi-fi amp
or AV receiver.
The audio cable is not connected properly.
Try pressing the [RESOLUTION] button on the remote
controller repeatedly to get picture (page 39).
On your hi-fi amp or AV receiver, select the input to
which the DV-CP704 is connected (page 19).
Check the audio cable and correct as necessary
(page 18–20).
The hi-fi amp or AV receiver connected to the
DV-CP704’s audio outputs is not on.
Turn on the hi-fi amp or AV receiver.
The Digital/HDMI Audio Out setting is incorrect.
Check the Digital/HDMI Audio Out setting and correct as
necessary (page 45).
No Sound from the HDMI OUT?
The Digital/HDMI Audio Out setting is set to Off.
No sound?
The DVD player is connected to the DVI jack on your
TV or AV receiver.
The HDMI setting on your TV or AV receiver is set to
DVI.
Your TV or AV receiver doesn’t support Dolby Digital.
Your TV or AV receiver doesn’t support DTS.
Your TV or AV receiver doesn’t support 96 kHz PCM.
Change the Digital/HDMI Audio Out setting to either All
or PCM (page 45).
You won’t hear any sound from the HDMI output if the
source component is only DVI/HDCP-Compatible
(page 45).
Change the HDMI setting on your TV or AV receiver to
HDMI (page 45).
Change the Digital/HDMI Audio Out setting to PCM
(page 45).
The DV-CP704 will not be able to play DTS format audio
or soundtracks. On your DVD-Video disc’s audio setup
menu, select an audio format other than DTS.
Change the Linear PCM Out setting to Down Sample On
(page 45).
49
Troubleshooting—Continued
Symptom
Possible cause
No Digital Audio Output?
The Digital/HDMI Audio Out setting is set to
Off.
Your TV or AV receiver doesn’t support Dolby
Digital.
No sound?
Your TV or AV receiver doesn’t support DTS.
The picture distorts
occasionally?
Picture instability or
noise?
Can’t start playback?
Can’t play MP3/WMA/
JPEG discs?
Can’t select MP3 files?
Can’t play WMA files?
Can’t view JPEG files?
Your TV or AV receiver doesn’t support
96 kHz PCM.
The disc is dirty.
You’re using the Fast Forward or Fast Reverse
function.
The DV-CP704 is connected to your TV via a
VCR or other video equipment and its copy
protection system is affecting the picture.
No discs loaded.
The selected disc cannot be played because
it’s incompatible.
The disc is upside down.
The disc is not centered in the disc bay.
The disc is dirty.
The selected disc has parental lock and the
Parental Lock function is on.
The disc is not ISO9660 Level 2 format or
Joliet.
The disc has not been finalized.
MP3 files without a “.mp3” or “.MP3” filename extension are not recognized.
WMA files without a “.wma” or “.WMA” filename extension are not recognized.
The WMA file’s copyright option is on.
JPEG files without a “.jpg” or “.JPG” filename
extension are not recognized.
Change the Digital/HDMI Audio Out setting to
either All or PCM (page 45).
Change the Digital/HDMI Audio Out setting to
PCM (page 45).
The DV-CP704 will not be able to play DTS format audio or soundtracks. On your DVD-Video
disc’s audio setup menu, select an audio format
other than DTS.
Change the Linear PCM Out setting to Down Sample On (page 45).
Remove the disc and clean it (page 9).
A little picture distortion may occur when using
these functions. This is normal.
Connect the DV-CP704 directly to your TV
(page 18).
Load some discs (page 23).
Load only compatible discs (page 7).
Load the disc the correct way up (page 23).
Place the disc in the center of the disc bay (page 23).
Remove the disc and clean it (page 9).
Turn off the Parental Lock function (page 47).
Use only ISO9660 Level 2 format or Joliet discs
(page 8).
Finalize the disc (page 8).
Use the correct filename extension (page 8).
Use the correct filename extension (page 8).
Don’t use the copyright option (page 8).
Use the correct filename extension (page 8).
The JPEG file is too big.
Use JPEG files that are less than 5 megabytes
(page 8).
The message “BAD DISC”
appears on the display?
The disc is dirty.
Remove the disc and clean it (page 9).
Buttons on the
DV-CP704 and remote
controller don’t work?
Power supply voltage fluctuations and other
anomalies, such as static electricity, can interfere with normal operation.
There are no batteries in the remote controller.
The batteries are flat.
The batteries are installed incorrectly.
Buttons on the
DV-CP704 work OK but
those on the remote controller don’t?
You’re not pointing the remote controller at
the DV-CP704’s remote sensor.
You’re too far away from the DV-CP704.
A strong light source is interfering with the
DV-CP704’s remote sensor.
If the DV-CP704 is installed in a cabinet with
colored glass doors, the remote controller may
not work reliably when the doors are closed.
50
Remedy
Turn off the DV-CP704, wait five seconds, then
turn it on again. If that doesn’t resolve the issue,
disconnect the power cord from the wall outlet,
wait five seconds, reconnect it, then try again.
Install new batteries (page 16).
Replace with new batteries (page 16).
Check the batteries and correct as necessary
(page 16).
Point the remote controller at the DV-CP704’s
remote sensor (page 16).
Use the remote controller closer to the DV-CP704
(page 16). The remote controller has a range of
approximately 16 ft. (5 meters).
Make sure that the DV-CP704 is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
Open the doors, or use a cabinet without colored
glass.
Troubleshooting—Continued
■ Abnormal Behavior
The DV-CP704 contains a microcomputer for signal processing and control functions. In very rare situations, severe
interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this
should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
Alternatively, press and hold the Stop [ ] button until “RESET” appears on the display (about 10 seconds).
■ Restoring the Default Settings
To reset the DV-CP704 to its factory defaults, turn it on, and when “ONKYO DVD” has disappeared from the display,
while holding down the Stop [ ] button, press the [STANDBY/ON] button. “INITIALIZE” appears on the display.
When the reset is complete, “COMPLETE” is displayed, and the DV-CP704 enters Standby mode.
■ HDMI Status Mode
If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection
by pressing and holding down the DV-CP704’s [DISPLAY] button for 10 seconds until a message ID appears on the
display. Look up the message ID in the following tables and check the HDMI connections and settings on both the
DV-CP704 and the connected component.
HDMI connection and HDMI-related settings status
Displayed ID
Message
MSG ID 001
MSG ID 015
Turn the DV-CP704 and the connected component off, then turn them on again. Make sure that the
connected component is working properly and that the DV-CP704’s HDMI settings are configured
suitably for that component.
No picture from the HDMI connection
Displayed ID
Message
MSG ID 002
The HDMI Output Setting is set to Off. Change it to On (page 44).
MSG ID 003
MSG ID 004
The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI
input on the TV or AV receiver is correctly configured to received HDMI.
MSG ID 005
MSG ID 006
MSG ID 007
Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
The connected component may not support HDCP. Make sure the connected component supports
HDCP.
Turn the DV-CP704 and the connected component off, then turn them on again.
The DV-CP704 may be connected to the other component’s DVI jack. Some TVs may not properly
receive the video output by the DV-CP704. Also, with a DVI connection, there will be no sound.
MSG ID 008
The DV-CP704’s HD Resolution setting is set to 720p or 1080i. If your TV doesn’t support these
resolutions, select another resolution (page 39).
MSG ID 009
The connected component may not be receiving the HDMI signal properly.
Try selecting another resolution on the DV-CP704 (page 39).
No sound from the HDMI connection
Displayed ID
Message
MSG ID 010
The DV-CP704’s Digital/HDMI Audio Out setting is set to Off. Change the setting to All or PCM
(page 45).
MSG ID 011
MSG ID 014
The connected component may not support 96 kHz PCM. Set the DV-CP704’s Linear PCM Out
setting to Down Sample On (page 45).
MSG ID 012
MSG ID 013
The connected component may not support Dolby Digital. Set the DV-CP704’s Digital/HDMI Audio
Out setting to PCM (page 45).
MSG ID 016
MSG ID 017
The connected component may not support DTS.
The DV-CP704 cannot play the DTS format audio or soundtrack. On your DVD-Video disc’s audio
setup menu, select an audio format other than DTS.
51
Specifications
Standard NTSC (U.S. model), PAL/AUTO (Australian
model)
Signal system
Frequency
response
DVD linear audio
4 Hz–22 kHz @ 48 kHz sampling rate
4 Hz–44 kHz @ 96 kHz sampling rate
CD audio
4 Hz–20 kHz (44.1 kHz)
Signal-to-noise ratio
95 dB
Audio dynamic range
95 dB
Total harmonic distortion
0.007% (1 kHz)
Wow and flutter
Below threshold of measurability
Temperature
Operating
conditions
Video outputs
Audio outputs
Install horizontally
COMPONENT VIDEO
Y: 1.0 V (p–p), 75 Ω, negative sync, RCA/phono x3
PB/PR: 0.7 V (p–p), 75 Ω
S VIDEO (S-Video)
Y: 0.7 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x1
C: 0.286 V (p–p), 75 Ω
VIDEO (composite video)
1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1
OPTICAL
–22.5 dBm, optical connector x1
COAXIAL
0.5 V (p–p), 75 Ω, RCA/phono x1
ANALOG
2.0 V (rms), 540 Ω, RCA/phono x2
HDMI output
General
5° to 35° C (41° F to 95° F)
Installation
19 pin connector
Power supply
120 V AC, 60 Hz (U.S. model)
100–240 V AC, 50/60 Hz (Australian model)
Power consumption
13 W
Power consumption in Standby mode
0.35 W (U.S. model)
0.35 W (Australian model)
Weight
5.5 kg (12.1 lbs.)
Dimensions (W x H x D)
435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17 ins.)
Disc compatibility
Audio CD, DVD-Video, MP3, WMA, JPEG, CD-R/RW,
DVD-R/RW (Video Mode), DVD+R/RW (Video Mode).
Discs that have not been property finalized may only be
partially playable or not playable at all.
Specifications and features subject to change without notice.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8124
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
HOMEPAGE
http://www.onkyo.com/
I0607-1
SN 29344218
(C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved.
52
* 2 9 3 4 4 2 1 8 *
">