VT207 Series
LCD Monitor
User Guide
Table of contents
Notices.......................................................................................................... iii
Safety information....................................................................................... iv
Care & Cleaning............................................................................................ v
1.1Welcome!....................................................................................... 1-1
1.2
Package contents.......................................................................... 1-1
1.3
Assembling the monitor base...................................................... 1-2
1.4
Connecting cables........................................................................ 1-2
1.5
Monitor introduction..................................................................... 1-3
1.5.1
Front of the LCD monitor................................................. 1-3
1.5.2
Rear of the LCD monitor.................................................. 1-5
1.5.3
QuickFit Function............................................................. 1-6
2.1Detaching the arm/stand
(for VESA wall mount).................................................................. 2-1
2.2
Adjusting the monitor................................................................... 2-2
3.1Touch Operation........................................................................... 3-1
4.1
OSD (On-Screen Display) menu.................................................. 4-1
4.1.1
How to reconfigure........................................................... 4-1
4.1.2
OSD Function Introduction............................................... 4-1
4.2
Specifications................................................................................ 4-6
4.3
Troubleshooting (FAQ)................................................................. 4-7
4.4
Supported Timing List.................................................................. 4-8
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
• The wall socket shall be installed near the equipment and shall be
easily accessible.
iv
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
vi
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
1.1Welcome!
Thank you for purchasing the ASUS® VT207 Series LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the VT207 Series brings you!
1.2
Package contents
Check your VT207 Series LCD package for the following items:
LCD monitor
Monitor base
Quick start guide
1 x Power cord
1 x VGA cable
1 x DVI cable (optional)
1 x USB cable
1 x Warranty card
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VT207
1-1
1.3
Assembling the monitor base
To assemble the monitor base:
1.
Connect the base with the arm of monitor and turn clockwise. A click
indicates that the base has been connected successfully.
2.
Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
2
1
1.4
Connecting cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-5.
1-2
Chapter 1: Product Introduction
1.5
Monitor introduction
1.5.1
Front of the LCD monitor
1
1.
3
4
5
Button:
•
Automatically adjust the image to its optimized position, clock, and
phase by long pressing this button for 2-4 seconds (for VGA mode
only).
•
Use this hotkey to switch from six video preset modes (Scenery Mode,
Standard Mode, Theater Mode, Game Mode, Night View Mode, and
sRGB Mode) with SPLENDID™ Video Enhancement Technology.
•
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
•
Press this button to decrease the value of the function selected or move
to the next function.
•
Press this button to activate the QuickFit function designed for
alignment.
•
The QuickFit function contains 2 pages of common grid patterns, and
photo sizes. (Please refer to 1.5.3 QuickFit Function)
2.
3.
2
Button
MENU Button:
•
Press this button to enter the OSD menu.
ASUS LCD Monitor VT207
1-3
•
Press this button to enter/select the icon (function) highlighted
while the OSD menu is activated.
•
This is QuickFit cycle key.
•
Press this button to increase the value of the function selected
or move to the previous function. This is also a hotkey for
Brightness adjustment.
4.
Button:
5.
1-4
Power Button/Power Indicator:
•
Press this button to turn the monitor on/off.
•
The color definition of the power indicator is as the table below.
Status
Description
Blue
ON
Amber
Standby mode
OFF
OFF
Chapter 1: Product Introduction
1.5.2
Rear of the LCD monitor
6
5
7
1.
AC-IN port
2.
USB port (only for touch function)
3.
DVI port
4.
VGA port
5.
Kensington Lock
6.
Screw holes for VESA Wall Mount
7.
Control buttons
ASUS LCD Monitor VT207
1
2
3
4
1-5
1.5.3
QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.
1. Grid patterns
The grid patterns facilitate designers and users to organize content and
layout on a page and achieve a consistent look and feel.
Alignment Grid
2. Photo size
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in
real size on the screen.
Photo 4x6, 3x5, 2x2
1-6
Chapter 1: Product Introduction
2.1Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VT207 Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1.
Pull the stop lever and turn anticlockwise to unlock.
2.
Detach the base from the monitor.
3.
Use your fingers gently pull away the plate that covers the stand
neck. Use a screwdriver to remove the four screws that secure the
stand to the monitor.
4.
Detach the stand from the monitor.
5.
Use a screwdriver to loosen 4 screws from rear cover.
•
e recommend that you cover the table surface with soft cloth to
W
prevent damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
2
1
3
4
5
6
•
The VESA wall mount kit ( 75 x 75 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/
load 10.8kg according to the model listed in the specification table
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VT207
2-1
2.2
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling while changing its
angle.
• You can adjust the monitor’s angle from -5˚ to 20˚.
• Do not touch the Touch screen when you change the angle. It may
cause damage or break the Touch screen and LCD screen.
-5 ~ 20
2-2
Chapter 2: Setup
3.1Touch Operation
• ASUS VT207 is a touch monitor which uses 10 point touch panel
technology. Please used with latest OS like Windows 8.
• You can use either single finger touch, or multi-finger touch up to
maximum simultaneous 10 touch points.
10-Point Touch
• To activate touch functionality, you need to connect the display with the
provided USB cable to your computer.
• You do not need to install any other software.
• ASUS VT207 offers you groovy touch gestures like tap, grab, pinch,
rotate, zoom, swipe, etc. The gestures allow you to launch programs
and access the setting of your ASUS VT207 Display. The functions can
be activated by using the hand gestures to ASUS VT207.
ASUS LCD Monitor VT207
3-1
Left edge swipe (on Windows 8 only)
Swipe from the left edge of the screen to shuffle your running apps.
Right edge swipe (on Windows 8 only)
Swipe from the right edge of the screen to launch the Charm bar.
Finger slide( on Windows 8 only)
Slide your finger to scroll up and down and slide your finger to pan the
screen left or right.
3-2
Chapter 3: Touch operation
Zoom out
Bring together your two fingers on the touch panel.
Zoom in
Spread apart your two fingers on the touch panel.
Single Tap/Double tap
Single Tap
Touch the target on the screen with one fingertip for one quick tap, then
release.
ASUS LCD Monitor VT207
3-3
Double Tap
Touch the target on the screen with one fingertip for two quick taps, then
release.
Tap an app to launch it (on Windows 8 only).
Double-tap an item to launch it.
Tap and hold
To move an app, tap and hold the app tile and drag it to a new location. To
close an app ( on Windows 8 only), tap and hold the top side of the running
app and drag it down to the bottom of the screen to close it.
3-4
Chapter 3: Touch operation
NOTE:• You can access to OS website to get more description
on touch operation.
• Do not touch the screen with sharp objects, it may result in damage, and void warranty.
• Do not push hard, or rest anything on the glass surface (if
in horizontal position) as it will damage the screen and void
warranty.
• Please keep your hands clean and dry before touching the
screen to ensure fluid touch operation.
• The touch function works only on OS and applications which
support touch functions.
ASUS LCD Monitor VT207
3-5
4.1
OSD (On-Screen Display) menu
4.1.1
How to reconfigure
VT207
Splendid
Scenery Mode
Color
Standard Mode
Image
Theater Mode
Input Select
Game Mode
System Setup
Night View Mode
sRGB
Move
Menu
Exit
1.
Press the [MENU] button to activate the OSD menu.
2.
Press  and  to navigate through the functions. Highlight and
activate the desired function by pressing the [MENU] button. If the
function selected has a sub-menu, press  and  again to navigate
through the sub-menu functions. Highlight and activate the desired
sub-menu function by pressing the [MENU] button.
3.
Press  and  to change the settings of the selected function.
4.
To exit the OSD menu, press the
to adjust any other function.
4.1.2
1.
button. Repeat step 2 and step 3
OSD Function Introduction
Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
VT207
Splendid
Scenery Mode
Color
Standard Mode
Image
Theater Mode
Input Select
Game Mode
System Setup
Night View Mode
sRGB
Move
4-1
Menu
Exit
Chapter 4: General Instruction
•
Scenery Mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Enhancement.
•
Standard Mode: This is the best choice for document editing
with SPLENDID™ Video Enhancement.
•
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Enhancement.
•
Game Mode: This is the best choice for game playing with
SPLENDID™ Video Enhancement.
•
Night View Mode: This is the best choice for playing darkscene game or watching movie with SPLENDID™ Video
Enhancement.
•
sRGB: This is the best choice for viewing photos and graphics
from PCs.
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
In the sRGB, the Brightness, Contrast, Saturation, Color
Temp., Skin Tone, Sharpness, and ASCR functions are not userconfigurable.
ASUS LCD Monitor VT207
4-2
2.
Color
Select the image color you like from this function.
VT207
Splendid
Brightness
Color
Contrast
Image
Saturation
Input Select
Color Temp.
System Setup
100
80
50
User Mode
Skin Tone
Natural
Smart View
Move
Menu
OFF
Exit
•
Brightness: The adjusting range is from 0 to 100. The
is also a hotkey to activate this function.
button
•
Contrast: The adjusting range is from 0 to 100.
•
Saturation: The adjusting range is from 0 to 100.
•
Color Temp.: Contain three preset color modes (Cool, Normal,
Warm) and one User Mode.
•
Skin Tone: Contain three color modes including Reddish,
Natural, and Yellowish.
•
Smart View: The versatile viewing positions with Smart View
Technology.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
3.
Image
You can adjust the image Sharpness, Aspect Control, ASCR Position
(VGA only), and Focus (VGA only) from this main function.
VT207
Splendid
Sharpness
Color
Aspect Control
Full
Image
ASCR
OFF
Input Select
Position
System Setup
Focus
Move
4-3
Menu
40
Exit
Chapter 4: General Instruction
4.
•
Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100. (Only disable for selecting “Standard Mode” and
“sRGB Mode” in Splendid menu.)
•
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”.
•
ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at
“Standard Mode” and “sRGB Mode”.)
•
Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
•
Focus: Reduce Horizonal-line noise and Vertical-line noise of
the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
Input Select
Select the input source from VGA, DVI.
VT207
Splendid
VGA
Color
DVI
Image
Input Select
System Setup
Move
ASUS LCD Monitor VT207
Menu
Exit
4-4
5.
System Setup
Adjust the system configuration.
VT207
Splendid
Splendid Demo Mode
OFF
Color
ECO Mode
OFF
Image
OSD Setup
Input Select
Language
System Setup
Information
English
All Reset
Move
4-5
Menu
Exit
•
Splendid Demo Mode: Activate the demo mode for the
Splendid function.
•
ECO Mode: Activate the ecology mode for power saving. (Some
gray levels may not be distinguished if ECO is ON. Its brightness
is lower than that when setting the Contrast Ratio to 100.)
•
OSD Setup: Adjust the horizontal postition (H-Position), vertical
position (V-Position), OSD Timeout, DDC/CI, and Transparency
of the OSD screen.
•
Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
•
Information: Display the monitor information of Input Port,
Resolution, H-freq., V-freq, and Model Name.
•
All Reset: Set to “Yes” to revert all settings to the factory default
status.
Chapter 4: General Instruction
4.2
Specifications
Model
VT207N
Panel Size
19.5”W(49.53 cm)
Max. Resolution
1600 x 900
Brightness (Typ.)
200cd/m2
Intrisinc Contrast Ratio
(Typ.)
1000:1
Viewing Angle (CR=10)
≧170°(H) / ≧160°(V)
Display Colors
16.7 M
Response Time
5ms
DVI input
Yes
D-Sub input
Yes
USB port(only for touch
function)
Yes
Power ON Consumption
Note
Power ON< 16.4 W*
* Based on Energy Star 6.0 standard
Power Saving Mode
< 0.5 W
Power OFF Mode
< 0.5 W
Tilt
-5° ~ +20°
VESA Wall Mounting
Yes (75mm x 75mm)
Phys. Dimension (WxHxD)
481 x 362 x 200mm
Box Dimension (WxHxD)
553 x 420 x 127mm
Net Weight (Esti.)
2.9kg
Gross Weight (Esti.)
4.7kg
Voltage Rating
AC 100~240V(Built-in)
*Specifications subject to change without notice.
ASUS LCD Monitor VT207
4-6
4.3
Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and • Check if the monitor and the computer are in the
there is no screen image
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or • Press the
button for two seconds to
sized properly
automatically adjust the image.
• Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave • Make sure the signal cable is properly connected to
pattern is present in the image
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects • Inspect the signal cable and make sure that none of
(white does not look white)
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
• Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
• Adjust the Phase and Clock settings via OSD.
4-7
Chapter 4: General Instruction
4.4
Supported Timing List
VESA / IBM Modes Support Timing (D-SUB, DVI-D inputs)
Resolution
640 x 350
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1600 x 900
VT207
Refresh Rate
70Hz
60Hz
67Hz
72Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
75Hz
60Hz
Horizontal Frequency
31.469KHz
31.469KHz
35KHz
37.861KHz
37.5KHz
31.469KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
49.725KHz
48.363KHz
56.476KHz
60.023KHz
67.5KHz
63.981KHz
79.976KHz
60KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor VT207
4-8
Download PDF

advertising