Samsung NX 30 User manual

USER
MANUAL
ENG This user manual includes detailed usage instructions
for your camera. Please read this manual thoroughly.
Copyright information
• Microsoft Windows and the Windows logo are registered trademarks of
the Microsoft Corporation.
• Mac and Apple App Store are registered trademarks of the Apple
Corporation.
• Google Play Store is a registered trademark of Google, Inc.
• Adobe, the Adobe logo, Photoshop and Lightroom are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• Camera specifications or contents of this manual may be changed
without prior notice due to upgrade of camera functions.
• You are not allowed to reuse or distribute any part of this manual
without prior permission.
• We recommend using your camera within the country where you
purchase it.
• Use this camera responsibly and adhere to all laws and regulations
concerning its use.
• microSD™, microSDHC™, and microSDXC™ are registered trademarks of
the SD Association.
• HDMI, the HDMI logo, and the term "High
Definition Multimedia Interface" are
trademarks or registered trademarks of HDMI
Licensing LLC.
PlanetFirst represents Samsung Electronics' commitment to
sustainable development and social responsibility through
eco-driven business and management activities.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered
trademarks of the Wi-Fi Alliance.
• Trademarks and trade names used in this manual are the property of
their respective owners.
1
Health and safety information
Always comply with the following precautions and usage tips to avoid
dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself
or others
Do not disassemble or attempt to repair your camera.
You can damage the camera and expose yourself to the risk of an electric
shock.
Do not use your camera near flammable or explosive gases
and liquids.
This may cause a fire or explosion.
Do not insert flammable materials into the camera or store
these materials near the camera.
This may cause a fire or electric shock.
Do not handle your camera with wet hands.
This may result in an electric shock.
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or
animals. If you use the flash too close to your subject’s eyes, this can cause
temporary or permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children
and animals. Small parts may cause choking or serious injury if swallowed.
Moving parts and accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause
permanent damage to your camera’s internal components.
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a fire.
Do not handle the power supply cord or the charger during a
thunderstorm.
This may result in an electric shock.
2
Health and safety information
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Comply with any regulations that restrict the use of a camera
in a certain area.
• Avoid interference with other electronic devices.
Caution—situations that could cause damage to your
camera or other equipment
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause serious
damage to your camera.
• Turn off the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations and
turn off your camera when directed by airline personnel.
• Turn off the camera near medical equipment. Your camera can interfere
with medical equipment in hospitals or health care facilities. Follow all
regulations, posted warnings, and directions from medical personnel.
Avoid interference with pacemakers.
Maintain a safe distance between this camera and all pacemakers to
avoid potential interference, as recommended by the manufacturer and
research groups. If you have any reason to suspect that your camera is
interfering with a pacemaker or other medical device, turn off the camera
immediately and contact the manufacturer of the pacemaker or medical
device for guidance.
Use only authentic, manufacturer-recommended,
Lithium-ion replacement batteries. Do not damage or heat the
battery.
Inauthentic, damaged, or heated batteries may cause a fire or personal
injury.
Use only Samsung-approved batteries, chargers, cables, and
accessories.
• Using unauthorized batteries, chargers, cables, or accessories can cause
batteries to explode, damage your camera, or cause injury.
• Samsung is not responsible for damage or injuries caused by
unapproved batteries, chargers, cables, or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
3
Health and safety information
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
When you use the AC charger, turn off the camera before you
disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in fire or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a fire or electric shock.
Exercise caution when you connect cables and install batteries
and memory cards.
If you force the connectors, improperly connect cables, or improperly
install batteries and memory cards, you can damage ports, connectors,
and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged battery, or memory card.
This may result in electric shock or camera malfunction or cause a fire.
Do not place the camera in or near magnetic fields.
Doing so may cause the camera to malfunction.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
Do not use the camera if the screen is damaged.
This may cause a fire or electric shock.
If the glass or acrylic parts are broken, visit a Samsung service center to
have the camera repaired.
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
4
Health and safety information
Check that the camera is operating properly before use.
Avoid interference with other electronic devices.
The manufacturer takes no responsibility for any loss of files or damage
that may result from camera malfunction or improper use.
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment, such as
pacemakers, hearing aids, medical devices, and other electronic devices in
homes or vehicles. Consult the manufacturers of your electronic devices
to solve any interference problems you experience. To prevent unwanted
interference, use only Samsung-approved devices or accessories.
You must plug the small end of the USB cable into your
camera.
If the cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
Do not expose the lens to direct sunlight.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
This may discolor the image sensor or cause it to malfunction.
Data transference and your responsibilities
If the camera overheats, remove the battery and allow it to
cool down.
• Data transferred via WLAN could be leaked, so avoid transferring
• Prolonged usage of the camera may overheat the battery and raise
• The camera manufacturer is not liable for any data transfers that infringe
the internal temperature of the camera. If the camera stops operating,
remove the battery and allow it to cool down.
sensitive data in public areas or on open networks.
on copyrights, trademarks, intellectual property laws, or public decency
ordinances.
• High internal temperatures may result in noise in your photos. This is
normal and does not affect your camera’s overall performance.
5
Indications used in this manual
Icons used in this manual
Icon
Mode indications
Function
Mode
Indication
Additional information
Smart Auto
t
Safety warnings and precautions
Program
P
]
Camera buttons. For example, [Shutter] represents the
shutter button.
Aperture Priority
A
[
Shutter Priority
S
(
)
Page number of related information
Manual
M
The order of options or menus you must select to perform
a step; for example: Select b ĺ Quality (represents
select b, and then Quality).
Custom1
T
Custom2
U
Annotation
Lens Priority
i
Smart
s
Wireless network
B
ĺ
*
6
Contents
Tips
Chapter 1
Concepts in Photography
My Camera
Shooting postures....................................................................................... 13
Getting started ............................................................................................ 29
Unpacking.................................................................................................................... 29
Camera layout .............................................................................................. 30
Holding the camera ..................................................................................................... 13
Standing photography ............................................................................................... 13
Crouching photography ............................................................................................ 14
Using the display .......................................................................................................... 14
Low-angle shot .............................................................................................................. 15
High-angle shot............................................................................................................. 15
Aperture ........................................................................................................ 16
Aperture value and the depth of field .................................................................. 17
Shutter speed............................................................................................... 18
ISO sensitivity .............................................................................................. 19
How the aperture setting, shutter speed, and ISO sensitivity
control exposure ......................................................................................... 20
Correlation between focal length, angle, and perspective ................ 21
Depth of field ............................................................................................... 22
What controls out-of-focus effects? ....................................................................... 22
DOF preview ................................................................................................................... 24
Composition ................................................................................................. 24
Rule of Thirds .................................................................................................................. 24
Photos with two subjects .......................................................................................... 25
Flash ............................................................................................................... 26
Flash guide number ..................................................................................................... 26
Bounce Photography .................................................................................................. 27
Adjusting the viewfinder angle and the diopter.............................................. 33
Using the DIRECT LINK button ................................................................................ 33
Inserting the battery and memory card ................................................. 34
Removing the battery and memory card ........................................................... 34
Using the memory card adapter ............................................................................. 34
Charging the battery and turning on your camera.............................. 35
Charging the battery................................................................................................ 35
Turning on your camera ......................................................................................... 35
Performing the initial setup ...................................................................... 36
Selecting functions (options) ................................................................... 38
Selecting with buttons ............................................................................................ 38
Selecting by touch .................................................................................................... 38
Using m .............................................................................................................. 39
E.g. Selecting the photo size in P mode ............................................................. 39
Using the Smart panel ............................................................................................. 40
E.g. Adjust the exposure value in P mode ......................................................... 40
Using iFn ....................................................................................................................... 41
Using the iFn standard function............................................................................. 42
Using the iFn plus function ...................................................................................... 44
7
Contents
Display icons ................................................................................................ 45
In Shooting mode ..................................................................................................... 45
Capturing photos ........................................................................................................ 45
Recording videos ......................................................................................................... 46
About the level gauge ............................................................................................... 46
In Playback mode ...................................................................................................... 47
Viewing photos ............................................................................................................ 47
Playing videos ............................................................................................................... 47
Changing the information displayed ................................................................. 48
Viewing the notification panel ............................................................................. 48
Lenses ............................................................................................................ 49
Lens layout................................................................................................................... 49
Locking or unlocking the lens................................................................................. 50
Lens markings ............................................................................................................ 52
Accessories ................................................................................................... 53
External flash layout ................................................................................................. 53
Connecting the external flash ................................................................................. 54
Shooting modes .......................................................................................... 55
t Smart Auto mode ..................................................................................... 55
P Program mode....................................................................................................... 57
Program Shift ................................................................................................................ 58
Minimum shutter speed............................................................................................ 58
A Aperture Priority mode ..................................................................................... 59
S Shutter Priority mode.......................................................................................... 60
M Manual mode ....................................................................................................... 61
Using Framing Mode .................................................................................................. 61
Using the Bulb function ............................................................................................ 62
T U Custom mode............................................................................................... 63
Saving custom modes................................................................................................ 63
Selecting custom modes .......................................................................................... 63
Deleting custom modes ............................................................................................ 64
i Lens Priority mode ............................................................................................. 64
s Smart mode......................................................................................................... 66
Using the Best Face mode ........................................................................................ 68
Capturing panoramic photos .................................................................................. 69
Using the Smart Jump Shot mode ........................................................................ 71
Recording a video ..................................................................................................... 72
3D mode ....................................................................................................................... 73
Available functions by shooting mode ............................................................. 75
Chapter 2
Shooting Functions
Size and Resolution .................................................................................... 77
Photo size ..................................................................................................................... 77
Quality ........................................................................................................................... 78
ISO sensitivity .............................................................................................. 79
OLED Color ................................................................................................... 80
White Balance .............................................................................................. 81
Customizing preset White Balance options ....................................................... 82
Picture Wizard (photo styles) .................................................................... 83
AF mode ........................................................................................................ 84
Single AF....................................................................................................................... 85
Continuous AF ............................................................................................................ 85
Manual focus............................................................................................................... 86
8
Contents
AF area ........................................................................................................... 87
Selection AF ................................................................................................................ 87
Multi AF......................................................................................................................... 88
Face Detection AF ..................................................................................................... 88
Self-Portrait AF ........................................................................................................... 89
Touch AF........................................................................................................ 90
Touch AF ....................................................................................................................... 90
AF Point......................................................................................................................... 90
Tracking AF .................................................................................................................. 90
One touch shot .......................................................................................................... 91
Focus assist ................................................................................................... 92
MF Assist ....................................................................................................................... 92
Focus Peaking ............................................................................................................. 93
DMF (Direct Manual Focus) .................................................................................. 93
Flash ............................................................................................................. 101
Reducing the red-eye effect ............................................................................... 102
Using the built-in flash ......................................................................................... 102
Adjusting the flash intensity .............................................................................. 103
Flash settings ........................................................................................................... 104
Setting external flash ............................................................................................... 104
Setting wireless sync for internal or external flash ........................................ 105
Metering...................................................................................................... 106
Multi ............................................................................................................................ 106
Center-weighted .................................................................................................... 107
Spot ............................................................................................................................. 107
Measuring the exposure value of the focus area ......................................... 108
Dynamic Range ......................................................................................... 109
Smart Filter ................................................................................................. 110
Setting DMF responsiveness ................................................................................... 93
Exposure compensation .......................................................................... 111
Optical Image Stabilization (OIS) ............................................................. 94
Viewing the overexposure guide ......................................................................... 111
Drive (shooting method) ........................................................................... 95
Single ............................................................................................................................. 96
Continuous .................................................................................................................. 96
Burst ............................................................................................................................... 97
Timer .............................................................................................................................. 97
Auto Exposure Bracketing (AE Bracket)............................................................. 98
White Balance Bracketing (WB Bracket) ............................................................ 98
Picture Wizard Bracketing (P Wiz Bracket) ........................................................ 99
Depth Bracketing ..................................................................................................... 99
Bracketing Settings .................................................................................................. 99
Interval Capture......................................................................................... 100
Exposure/Focus lock ................................................................................. 112
Exposure/Focus separation..................................................................... 113
Video functions ......................................................................................... 114
Movie size.................................................................................................................. 114
Movie quality ........................................................................................................... 114
Multi Motion ............................................................................................................ 115
DIS (Anti-Shake) ...................................................................................................... 115
Fader ........................................................................................................................... 116
Voice............................................................................................................................ 116
Wind Cut .................................................................................................................... 116
Mic Level.................................................................................................................... 117
9
Contents
Chapter 3
Playback/Editing
Searching and managing files ................................................................ 119
Viewing photos ....................................................................................................... 119
Viewing image thumbnails................................................................................. 119
Viewing files by category .................................................................................... 120
Viewing files as a folder........................................................................................ 121
Protecting files ........................................................................................................ 122
Lock/Unlock all files .................................................................................................. 122
Deleting files ............................................................................................................ 123
Deleting a single file ................................................................................................. 123
Deleting multiple files.............................................................................................. 123
Deleting all files .......................................................................................................... 123
Viewing photos.......................................................................................... 124
Enlarging a photo .................................................................................................. 124
Viewing a slide show............................................................................................. 124
Viewing the overexposure guide ..................................................................... 125
Viewing interval shots .......................................................................................... 125
Auto rotating ........................................................................................................... 125
Playing videos ............................................................................................ 126
Scanning backward or forward ......................................................................... 126
Adjusting the brightness of a video ................................................................ 127
Adjusting the volume of a video ...................................................................... 127
Trimming a video during playback .................................................................. 128
Capturing an image during playback ............................................................. 128
Editing photos ........................................................................................... 129
Cropping a photo ................................................................................................... 129
Rotating a photo .................................................................................................... 130
Resizing photos....................................................................................................... 130
Adjusting your photos.......................................................................................... 131
Retouching faces .................................................................................................... 132
Reducing red-eye ................................................................................................... 132
Applying Smart Filter effects.............................................................................. 133
Chapter 4
Wireless network
Connecting to a WLAN and configuring network settings............... 135
Connecting to a WLAN ......................................................................................... 135
Setting network options ......................................................................................... 136
Manually setting the IP address ........................................................................... 136
Using the login browser....................................................................................... 137
Network connection tips ..................................................................................... 138
Entering text ............................................................................................................ 139
Using the NFC Feature (Tag & Go) ......................................................... 140
Using NFC features in Shooting mode ........................................................... 140
Using NFC features in Playback mode (Photo Beam)................................ 140
Using NFC features in Wi-Fi mode .................................................................... 140
10
Contents
Saving files to a smart phone automatically ....................................... 141
Chapter 5
Sending photos or videos to a smart phone ....................................... 143
Camera settings menu
Using a smart phone as a remote shutter release .............................. 145
User settings............................................................................................... 161
Manage Custom Mode ......................................................................................... 161
ISO Customizing ..................................................................................................... 161
Using the Baby Monitor ........................................................................... 147
Adjusting the noise level for alarm activation ............................................. 148
Using Auto Backup to send photos or videos ..................................... 149
Installing the program for Auto Backup on your PC.................................. 149
Sending photos or videos to a PC .................................................................... 149
Sending photos or videos via email ...................................................... 151
Changing email settings...................................................................................... 151
Storing your information ........................................................................................ 151
Setting an email password ..................................................................................... 152
Changing the email password .............................................................................. 153
Sending photos or videos via email ................................................................ 153
Using photo or video sharing services ................................................. 155
Accessing a sharing service ................................................................................ 155
Uploading photos or videos............................................................................... 156
Using Samsung Link to send files .......................................................... 157
Uploading photos to an online storage or registered devices .............. 157
Viewing photos or videos on devices that support Samsung Link...... 158
ISO Step ......................................................................................................................... 161
Auto ISO Range .......................................................................................................... 161
Noise Reduction .....................................................................................................
Bracketing Settings ...............................................................................................
DMF (Direct Manual Focus) ................................................................................
DMF Responsiveness ............................................................................................
Color Space...............................................................................................................
Distortion Correct ..................................................................................................
Touch Operation .....................................................................................................
iFn Setting .................................................................................................................
User Display..............................................................................................................
Key Mapping ............................................................................................................
Live view NFC...........................................................................................................
MobileLink/NFC Image Size ...............................................................................
Display Select ..........................................................................................................
Grid Line ....................................................................................................................
AF Lamp .....................................................................................................................
E-Shutter....................................................................................................................
Lens Button Speed Settings ...............................................................................
161
162
162
162
163
164
164
164
165
166
167
167
167
167
168
168
168
Setting ......................................................................................................... 169
11
Contents
Chapter 6
Connecting to external devices
Viewing files on an HDTV or 3D TV ........................................................ 174
Viewing files on an HDTV .................................................................................... 174
Viewing files on a 3D TV....................................................................................... 175
Transferring files to your computer....................................................... 176
Transferring files to your Windows OS computer ....................................... 176
Connecting the camera as a removable disk................................................... 176
Disconnecting the camera (for Windows XP) .................................................. 177
Transferring files to your Mac OS ...................................................................... 177
Using programs on a PC........................................................................... 179
Installing programs from the provided CD ................................................... 179
Available programs when using i-Launcher .................................................... 179
Using i-Launcher .................................................................................................... 180
Requirements for Windows OS ............................................................................. 180
Requirements for Mac OS ....................................................................................... 180
Opening i-Launcher .................................................................................................. 180
Downloading the firmware .................................................................................... 181
Downloading the PC Auto Backup program ................................................... 181
Installing Adobe Photoshop Lightroom ........................................................ 181
Using Adobe Photoshop Lightroom ............................................................... 181
Cleaning the camera ............................................................................................. 184
Camera lens and display ......................................................................................... 184
Image sensor ............................................................................................................... 184
Camera body ............................................................................................................... 184
Using or storing the camera ............................................................................... 185
Inappropriate places to use or store the camera ........................................... 185
Using on beaches or shores ................................................................................... 185
Storing for extended period of time ................................................................... 185
Using the camera with caution in humid environments ............................ 186
Other cautions ............................................................................................................ 186
About memory card .............................................................................................. 187
Supported memory card ........................................................................................ 187
Memory card capacity ............................................................................................. 188
Cautions when using memory cards .................................................................. 190
About the battery .................................................................................................. 191
Battery specifications ............................................................................................... 191
Battery life .................................................................................................................... 192
Low battery message ............................................................................................... 192
Notes about using the battery.............................................................................. 192
Cautions about using the battery........................................................................ 193
Notes about charging the battery ....................................................................... 193
Notes about charging with a computer connected...................................... 194
Handle and dispose of batteries and chargers with care ............................ 194
Updating the firmware............................................................................. 195
Before contacting a service center ........................................................ 196
Camera specifications .............................................................................. 199
Chapter 7
Appendix
Glossary....................................................................................................... 204
Optional accessories................................................................................. 210
Error messages .......................................................................................... 183
Index ............................................................................................................ 211
Maintaining the camera........................................................................... 184
FCC notice ................................................................................................... 214
12
Concepts in Photography
Shooting postures
A correct posture for stabilizing the camera is necessary for taking a good
photo. Even if you hold a camera correctly, the wrong posture can cause
the camera to shake. Stand up straight and remain still to maintain a
steady base for your camera. When shooting with a slow shutter speed,
hold your breath to minimize body movement.
Standing photography
Compose your shot; stand up straight with your feet shoulder-length
apart, and keep your elbows pointed down.
Holding the camera
Hold the camera with your right hand and place your right index finger on
the shutter button. Place your left hand under the lens for support.
13
Concepts in Photography
Crouching photography
Compose your shot, crouch with one knee touching the ground, and keep
a straight posture.
Using the display
Swing the display outwards 180° and rotate it up or down for high-and
low-angle photos or self portraits ( ). You can rotate the display a
maximum of 90° downward or 180° upward ( ). You can also rotate the
display 180° upward and fold it ( ).
• Keep the display closed when the camera is not in use.
• Tilt the display only within the angle allowed. Failing to do so may damage
your camera.
• Use the Wi-Fi functions when the display is set as shown in illustrations
and
.
14
Concepts in Photography
Low-angle shot
A low-angle shot is a shot from a camera positioned below your eyeline,
looking up the subject.
High-angle shot
A high-angle shot is a shot from a camera positioned above your eyeline,
looking down on the subject.
15
Concepts in Photography
Aperture
The aperture is one of the three factors that determine the exposure. The
aperture housing contains thin, metal plates that open and close to let
light through the aperture and into the camera. The size of the aperture
is related to the amount of light: a larger aperture allows more light and a
smaller aperture allows less light.
Aperture sizes
The size of the aperture is represented by a value known as an "F-number."
The f-number represents the focal length divided by the diameter of the
lens. For example, if a lens with a 50 mm focal length has an f-number of
F2, the diameter of the aperture is 25 mm. (50 mm/25 mm = F2)
The smaller the f-number, the greater the size of the aperture.
The opening in the aperture is described as the Exposure Value (EV).
Increasing the Exposure Value (+1 EV) means the amount of light doubles.
Decreasing the Exposure Value (-1 EV) means the amount of light halves.
You can also use the exposure compensation feature to fine-tune the
amount of light by subdividing exposure values into 1/2, 1/3 EV, and so on.
+1 EV
Minimum aperture
Medium aperture
-1 EV
Maximum aperture
F1.4
F2
F2.8
F4
F5.6
F8
Exposure Value Steps
Aperture opened slightly
Aperture opened wide
16
Concepts in Photography
Aperture value and the depth of field
You can blur or sharpen the background of a photo by controlling the
aperture. It is closely related to the depth of field (DOF), which can be
expressed as small or large.
The aperture housing contains several blades. These blades move together and
control the amount of light passing through the center of the aperture. The
number of blades also affects the shape of light when shooting night scenes. If
an aperture has an even number of blades, light divides into an equal number
of sections. If the number of blades is odd, the number of sections is double the
number of blades.
For example, an aperture with 8 blades divides light into 8 sections and an
aperture with 7 blades into 14 sections.
A photo with a large DOF
A photo with a small DOF
7 blades
8 blades
17
Concepts in Photography
Therefore, the faster the shutter speed, the less light will be let in. Likewise,
the slower the shutter speed, the more light will be let in.
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the
shutter. It controls the amount of light which passes through the aperture
before it reaches the image sensor.
Usually, the shutter speed is manually adjustable. The measurement of the
shutter speed is known as the "Exposure Value" (EV), which is marked in
intervals of 1 s, 1/2 s, 1/4 s, 1/8 s, 1/15 s, 1/1,000 s, 1/2,000 s, and so on.
The photos below illustrate that a slow shutter speed allows more time
for light to enter the camera. This adds a motion blurring effect to moving
objects. On the other hand, a fast shutter speed allows less time to let light
in and the photo more easily freezes subjects in motion.
+1 EV
Exposure
-1 EV
0.8 s
1s
1/2 s
1/4 s
1/8 s
1/15 s
0.004 s
1/30 s
Shutter Speed
18
Concepts in Photography
ISO sensitivity
The exposure of an image is determined by the sensitivity of the camera.
This sensitivity is based on international film standards, known as ISO
standards. On digital cameras, this sensitivity rating is used to represent
the sensitivity of the digital mechanism that captures the image.
ISO sensitivity doubles as the number doubles. For example, an
ISO 200 setting is capable of capturing images at twice the speed of an
ISO 100 setting. However, higher ISO settings can result in "noise"—small
specks, spots, and other phenomena in a photo that give the shot a noisy
or dirty appearance. As a general rule, it is best to use a low ISO setting
to prevent noise in your photos, unless you are shooting in darkened
environments or at night.
Because a low ISO sensitivity means the camera will be less sensitive to
light, you need more light to have an optimal exposure. When using a low
ISO sensitivity, open the aperture more or reduce the shutter speed to
allow more light to enter the camera. For example, on a sunny day when
light is abundant, a low ISO sensitivity does not require a slow shutter
speed. However, in a dark place or at night, a low ISO sensitivity will
result in a blurry photo. Therefore, it is recommended to increase the ISO
sensitivity by a moderate amount.
A photo captured with a tripod and high
ISO sensitivity
A blurred photo with a low ISO sensitivity
Changes in the quality and brightness according to ISO sensitivity
19
Concepts in Photography
How the aperture setting, shutter speed,
and ISO sensitivity control exposure
The aperture setting, shutter speed, and ISO sensitivity are closely
interconnected in photography. The aperture setting controls the opening
that regulates the light that enters the camera, while the shutter speed
determines the length of time that light is allowed to enter. ISO sensitivity
determines the speed at which the film reacts to light. Together, these
three aspects are described as the triangle of exposure.
Settings
Shutter speed
Aperture
value
Results
Fast speed
= less light
Slow speed
= more light
Fast = still
Slow = blurry
A change in shutter speed, aperture value, or ISO sensitivity can be offset
by adjustments to the others to maintain the amount of light. The results,
however, change according to the settings. For example, shutter speed is
useful in expressing movement, aperture can control the depth of field,
and ISO sensitivity can control the graininess of a photo.
Settings
Results
ISO sensitivity
High sensitivity
= more sensitive to light
Low sensitivity
= less sensitive to light
High = more grainy
Low = less grainy
Wide aperture
= more light
Narrow aperture
= less light
Wide = small depth of field
Narrow = large depth of field
20
Concepts in Photography
Correlation between focal length, angle,
and perspective
Long focal length
Focal length, which is measured in millimeters, is the distance between
the middle of the lens to its focal point. It affects the angle and perspective
of captured images. A short focal length translates into a wide angle,
which allows you to capture a wide shot. A long focal length translates
into a narrow angle, which allows you to capture telephoto shots.
telephoto lens
telephoto shot
Short focal length
narrow angle
Look at these photos below and compare the changes.
wide-angle lens
wide shot
wide angle
18 mm angle
55 mm angle
200 mm angle
Normally, a lens with a wide angle is suitable for shooting landscapes and a lens
with a narrow angle is recommended for shooting sports events or portraits.
21
Concepts in Photography
What controls out-of-focus effects?
Depth of field
Portraits or still-life photos mostly acclaimed by people are the ones on
which the background is out of focus so the subject looks pronounced.
Depending on the focused areas, a photo can be blurred or sharpened.
This is called 'a low DOF' or 'a high DOF'.
The depth of field is the focused area around the subject. Therefore, a
small DOF signifies that the focused area is narrow and a large DOF means
the focused area is wide.
DOF depends on aperture value
The wider the aperture is (namely the lower the aperture value), the lower
the DOF becomes. Under the condition where the focal length is equal, a
low aperture value leads to a photo with a low DOF.
A photo with a small DOF, which stresses the subject and makes the rest
of it blurred, can be obtained by using a telescope lens or selecting a low
aperture value. Conversely, a photo with a large DOF which shows all the
elements on the photo sharply focused can be achieved by using a wide
angle lens or selecting a high aperture value.
55 mm F5.7
Small Depth of Field
55 mm F22
Large Depth of Field
22
Concepts in Photography
DOF depends on focal length
The longer the focal length is, the lower the DOF gets. A telescope lens
with a longer focal length than a wide-angle lens with a short focal length
is better to capture a photo of a low DOF.
DOF depends on the distance between the subject and the
camera
The shorter the distance between the subject and the camera is, the lower
the DOF gets. Therefore, taking a photo close to a subject can result in a
photo of low DOF.
A photo captured with a 18 mm wide-angle lens
A photo captured with a 100 mm telescope lens
A photo captured with a 100 mm telescope lens
A photo captured close to the subject
23
Concepts in Photography
DOF preview
You can press [Depth preview] to get an idea of what your shot will look
like before shooting. The camera adjusts the aperture to the predefined
settings and shows the results on the screen. Set the function of the Depth
preview button to Optical Preview. (p. 166)
Composition
It is fun to capture a photo of the beauty of world with a camera. No
matter how the world is beautiful, however, a poor composition cannot
capture the beauty of it.
When it comes to composition, it is very important to prioritize subjects.
Composition in photography means arranging objects in a photo. Usually,
abiding by the rule of thirds leads to a good composition.
Rule of Thirds
To use the rule of thirds, divide the image into a 3x3 pattern of equal
rectangles.
To compose photos that best emphasize the subject, make sure the
subject is located at one of the corners of the center rectangle.
24
Concepts in Photography
Using the rule of thirds will create photos with stable and compelling
compositions. Below are a few examples.
Photos with two subjects
If your subject is in one corner of the photo, it creates an unbalanced
composition. You can stabilize the photo by capturing a second subject in
the opposite corner to balance the weight of the photo.
Subject 2
Subject 1
Unstable
Subject 2
Subject 1
Stable
When taking landscape photos, centering the horizon will create an
unbalanced effect. Give more weight to the photo by moving the horizon
up or down.
Subject 1
Subject 1
Subject 2
Subject 2
Unstable
Stable
25
Concepts in Photography
Flash guide number
Flash
Light is one of the most important components in photography. It is not
easy, however, to have an enough amount of light anytime and anywhere.
Making use of a flash allows you to optimize light settings and create a
variety of effects.
Flash, also known as strobe or speed light, helps to create adequate
exposure in low-light conditions. It is also useful in light-abundant
situations. For example, flash can be used in compensating the exposure
of a subject’s shadow or capturing clearly both the subject and the
background in backlit conditions.
The model number of a flash refers to the flash’s power, and the maximum
amount of light created is represented by a value known as a "guide
number." The bigger the guide number, the more light is emitted from the
flash. The guide number is achieved by multiplying the distance from the
flash to the subject and the aperture value when the ISO sensitivity is set
to 100.
Guide number = Flash to Subject Distance X Aperture value
Aperture value = Guide number/Flash to Subject Distance
Flash to Subject Distance = Guide number/Aperture value
Therefore, if you know the guide number of a flash, you can estimate an
optimum flash to subject distance when setting the flash manually. For
example, if a flash has a guide number of GN 20 and is 4 meters away from
the subject, the optimal aperture value is F5.0.
Before correction
After correction
26
Concepts in Photography
Bounce Photography
Bounce photography refers to the method of bouncing light off of the
ceiling or walls so that the light spreads evenly over the subject. Normally,
photos captured with flash may appear unnatural and cast shadows.
Subjects in photos captured with bounce photography cast no shadows
and look smooth due to evenly spread light.
27
Chapter 1
My Camera
Learn about your camera’s layout, display icons, lens, optional accessories,
and basic functions.
My Camera
Getting started
Unpacking
Check your product box for the following items.
Camera
(including the body cap and
hot-shoe cover)
AC adapter/USB cable
Rechargeable battery
Strap
Software CD-ROM
(User manual included)
Adobe Photoshop Lightroom DVD-ROM
Quick Start Guide
Quick Reference Guide
• The illustrations may differ from your actual items.
• You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any
problems caused by using unauthorized accessories. For information about accessories, refer to page 210.
29
My Camera
Camera layout
3 4
1
No.
2
5
6
7
17
16
15
14
1
13 12 11
10
9
8
2
3
Name
No.
Name
Command dial
• In the Menu screen: Move to a desired
4
Hot-shoe
5
Built-in flash (p. 102)
6
Flash pop-up button (p. 102)
7
Microphone
8
Lens release button
9
Image sensor
10
Lens mount
11
Depth preview button (p. 24)
12
Lens mount index
13
AF-assist light/Timer lamp
14
Power switch
15
Shutter button
16
Metering button (p. 106)
17
DIRECT LINK button: Start a preset Wi-Fi
function. (p. 33)
menu item.
• In the Smart panel: Adjust a selected
option.
• In Shooting mode: Adjust shutter
speed or aperture value in some
shooting modes or change the size of
a focus area.
• In Playback mode: View thumbnails
or enlarge or reduce a photo. Open
or close a folder of continuous or
burst shots in Playback mode. Scan
backward or forward a video.
Mode dial
• t: Smart Auto mode (p. 55)
• P: Program mode (p. 57)
• A: Aperture Priority mode (p. 59)
• S: Shutter Priority mode (p. 60)
• M: Manual mode (p. 61)
• T: Custom mode 1 (p. 63)
• U: Custom mode 2 (p. 63)
• i: Lens Priority mode (p. 64)
• s: Smart mode (p. 66)
• B: Wireless Network (p. 134)
Hot-shoe cover
30
My Camera >
Camera layout
No.
1
14 13
12
2
3
4
5
6
7
1
2
Name
Drive dial
• H: Single (p. 96)
• J: Continuous (p. 96)
• K: Timer (p. 97)
• L: Bracketing (p. 98)
Video recording button
No.
Navigation button (Smart dial)
• In Shooting mode
- D: Change the information on the
display.
8
11 10 9
8
Move up, down, left, right, respectively.
(You can also rotate the navigation
button.)
Press and hold the button, and then scroll
the command dial to adjust the exposure
value.
AEL button (p. 112)
• In Shooting mode: Lock the adjusted
4
Playback button
9
exposure value or focus.
Fn button
Access the Smart panel and fine-tune
some settings.
10
o button
• In the Menu screen: Save the selected
6
options.
• In Shooting mode: Allow you to select
a focus area manually in some shooting
modes.
7
Delete/Custom button
• In Shooting mode: Perform the
assigned function. (p. 166)
• In Playback mode: Delete files.
Enter Playback mode to view pictures or
videos.
Status lamp
• In Playback mode: Protect the selected
file.
5
- I: Select an ISO value.
- C: Select a White Balance option.
- F: Select an AF mode.
• In other situations
Start recording a video.
EV adjust button (p. 111)
3
Name
11
Indicate the status of the camera.
• Blinking: When saving a photo,
shooting a video, sending data to a
computer, connecting to WLAN, or
sending a photo.
• Steady: When there is no data transfer,
when data transfer to a computer is
complete, or charging the battery.
MENU button
Access options or menus.
12
Proximity sensor (p. 167)
13
Viewfinder (p. 33)
14
Eye-cup
31
My Camera >
Camera layout
No.
Name
1
Diopter adjustment dial (p. 33)
1
2
Eyelet for camera strap
2
3
3
4
5
External microphone port
Insert a 3.5 mm stereo microphone.
4
Speaker
5
NFC tag
6
HDMI port
USB and shutter release port
7
8
9
6
7
11 10
9
Connect the camera to a computer or shutter release. Use a shutter release cable with a tripod
to minimize camera movement.
Battery chamber/Memory card cover
Insert a memory card and battery.
Display (touch screen)
• To take photos at high or low angles, tilt the display up or down. (p. 14)
• Touch the screen to select a menu or an option. (p. 38)
10
Internal antenna
11
Tripod mount
* Avoid contact with the internal antenna while using a wireless network.
8
32
My Camera >
Camera layout
Adjusting the viewfinder angle and the diopter
Adjust the angle of the viewfinder to take photos conveniently. Pull out the viewfinder gently ( )
and tilt it to adjust the angle ( ).
The diopter adjustment dial is accessible when you pull out the viewfinder. If the image is not
clear through the viewfinder, rotate the diopter adjustment dial to improve the image.
Do not adjust the viewfinder angle or rotate the diopter adjustment dial beyond the permitted limits. Doing
so may damage the viewfinder or the diopter adjustment dial.
Using the DIRECT LINK button
You can turn on the Wi-Fi feature conveniently by pressing [DIRECT LINK].
Press [DIRECT LINK] again to return to the previous mode.
Setting the DIRECT LINK button
You can select a Wi-Fi function to launch when you press [DIRECT LINK]. (p. 166)
To set a DIRECT
LINK option,
In Shooting mode, press [m] ĺ d ĺ Key Mapping ĺDIRECT LINKĺ an option.
33
My Camera
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the
camera.
Removing the battery and memory card
Battery lock
Slide the lock down to release the battery.
Rechargeable battery
Push the card gently until it disengages
from the camera, and then pull it out of
the slot.
Insert a memory card with the goldcolored contacts facing down.
Memory card
Memory card
Insert the battery with the Samsung logo
facing up.
Using the memory card adapter
Rechargeable battery
To use micro memory cards with this product, a PC, or a memory
card reader, insert the card into an adapter.
While the status lamp of the camera is blinking, do not remove the memory card
or battery. Doing so may damage the data stored on the memory card or your
camera.
34
My Camera
Charging the battery and turning on your camera
Charging the battery
Turning on your camera
Before you use the camera for the first time, you must charge the battery.
Plug the small end of the USB cable into your camera, and then plug the
other end of the USB cable into the AC adapter.
Set the Power switch to ON.
• To turn your camera off, set the Power switch to OFF.
• The initial setup screen appears when you turn on the camera for the
first time. (p. 36)
Status lamp
• Red light on: Charging
• Green light on: Fully charged
• Red light blinking: Charging Error
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter, the camera battery may not charge or work properly.
35
My Camera
Performing the initial setup
When you turn on your camera for the first time, the initial setup screen
appears. The language is preset for the country or region where the
camera is sold. You can change the language as desired. You can also select
an item by touching it on the screen.
1
Press [I] to select Time Zone, and then press [o].
2
Press [D/I] to select a time zone, and then press [o].
5
Press [D/I] to set the option, and then press [o].
Back
Date Settings
Month
Day
Year
Back
• The screen may differ depending on the language you selected.
Time Zone
[GMT +00:00] London
[GMT -01:00] Cape Verde
[GMT -02:00] Mid-Atlantic
[GMT -03:00] Buenos Aires, Sao Paulo
[GMT -03:30] Newfoundland
3
6
Press [I] to select Time Settings, and then press [o].
7
Press [C/F] to select an item (Hr/Min/DST).
8
Press [D/I] to set the option, and then press [o].
Press [I] to select Date Settings, and then press [o].
Back
Time Settings
4
Press [C/F] to select an item (Year/Month/Day).
Hr
Min
DST
36
My Camera >
9
Performing the initial setup
Press [I] to select Date Type, and then press [o].
10 Press [D/I] to select a date type, and then press [o].
Back
Language
English
Time Zone
London
Date Type
Date Settingss
YYYY/MM/DD
Time Settingss
MM/DD/YYYY
Date Type DD/MM/YYYY
11
Press [I] to select Time Type, and then press [o].
12 Press [D/I] to select a time type, and then press [o].
Back
Time Zone
Date Settings
Time Settings
Time Type
Date Type
12H
London
2014/01/01
10:00 AM
Time Type 24H
13 Press [m] to finish the initial setup.
37
My Camera
Selecting functions (options)
Selecting with buttons
Scroll the command dial or rotate the navigation button or press
[D/I/C/F] to move, and then press [o] to select an option.
Selecting by touch
Do not use sharp objects, such as pens or pencils, to touch the screen. You can
damage the screen.
Dragging: Touch and hold an area on
the screen, and then drag your finger.
Touching: Touch an icon to select a
menu or an option.
Flicking: Gently flick your finger
across the screen.
38
My Camera >
Selecting functions (options)
• When you touch or drag the screen, discolorations may occur. This is not a
malfunction, but a characteristic of the touch screen. Touch or drag lightly to
minimize the discolorations.
• The touch screen may not work properly if you use the camera in extremely
humid environments.
• The touch screen may not work properly if you apply screen protection film
or other accessories to the screen.
• Depending on the viewing angle, the screen may appear dim. Adjust the
brightness or viewing angle to improve the resolution.
Using m
Press [m] or touch
options or settings.
on the screen, and then change shooting
E.g. Selecting the photo size in P mode
1
Rotate the mode dial to P.
2
Press [m] or touch
3
Scroll the command dial or press [D/I] to move to b,
and then press [o].
.
• You can also touch b on the screen.
4
Rotate the navigation button or press [D/I] to move to
Photo Size, and then press [o].
• You can also drag the option list, and then touch an option.
Back
Select
AutoShare
Photo Size
Quality
ISO
OLED Color
Off
39
My Camera >
5
Selecting functions (options)
Rotate the navigation button or press [D/I] to move to
an option, and then press [o].
Using the Smart panel
• You can also drag the option list, and then touch an option.
Press [f] or touch
on the screen to access some functions such as
Exposure, ISO, and White Balance.
• Press [m] or touch Back to go back to the previous menu.
Back
Select
AutoSharePhoto Size
(3:2) (5472x3648)
Photo Size
(3:2) (3888x2592)
Quality
(3:2) (2976x1984)
ISO
(3:2) (1728x1152)
OLED Color
6
E.g. Adjust the exposure value in P mode
1
Rotate the mode dial to P.
2
Press [f] or touch
.
(16:9) (5472x3080)
Press [m] or touch Back to switch to Shooting mode.
40
My Camera >
3
Selecting functions (options)
Rotate the navigation button or press [D/I/C/F]
to move to EV, and then press [o].
• You can directly select an option by scrolling the command dial
without having to press [o].
• You can also select an option by touching it.
Back
Using iFn
Press [i-Function] on an i-Function lens to manually select and adjust
shutter speed, aperture value, exposure value, ISO sensitivity, and White
Balance on the lens.
Adjust
EV : 0.0
You can adjust some options by
dragging them.
Select an option.
Adjust an option value.
4
Scroll the command dial or rotate the navigation button or
press [C/F] to adjust the exposure value, and then press
[o].
• You can also drag the dial on the screen, and then touch Set to
adjust the option.
Back
Set
EV : 0.0
41
My Camera >
Selecting functions (options)
Using the iFn standard function
When you use [i-Function] on an i-Function lens, you can manually select
and adjust shutter speed, aperture value, exposure value, ISO sensitivity,
and White Balance on the lens. You can also use the Z function.
1
Rotate the mode dial to P, A, S, or M.
2
Press [m] ĺ d ĺ iFn Setting ĺ Mode ĺ iFn Standard.
3
Press [m] to return to Shooting mode.
4
Press [i-Function] on the lens to select a setting.
• To select items to appear, select [m] ĺ d ĺ iFn Setting ĺ
iFn Standard ĺ an item.
• You can also press [i-Function], and then press [D/I] or drag
the screen to select a setting.
Option
Description
Aperture value
Adjust the aperture value.
Shutter speed
Adjust the shutter speed.
EV
Adjust the exposure value.
ISO
Adjust the ISO sensitivity.
White Balance
Select a White Balance option.
Z
Zoom in on a subject with less degradation of
photo quality than the Digital zoom. However, the
photo resolution or size may change compared to
when you zoom in by rotating the zoom ring.
42
My Camera >
5
Selecting functions (options)
Adjust the focus ring to select an option.
• You can also scroll the command dial or rotate the navigation
button or drag the screen to select an option.
Available options
Shooting mode
P
A
S
M
3D
Aperture
-
O
-
O
-
Shutter speed
-
-
O
O
-
EV
O
O
O
-
O
ISO
O
O
O
O
-
White Balance
O
O
O
O
O
Z
O
O
O
O
-
• This function is not available when you attach a 3D lens and set 3D Auto
Mode in 3D mode.
6
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
• Z is not available when you set the shooting method to Burst.
• Z is not available when you capture photos in the RAW file format.
• Z is deactivated when you record videos by pressing the video
recording button.
43
My Camera >
Selecting functions (options)
Using the iFn plus function
On an i-Function lens, press [i-Function], and then press [N], [W],
or [a] on the camera. You can start assigned functions or open the
settings menu with i-Function.
E.g. Assigning the photo quality function to the Metering
button
1
Rotate the mode dial to P, A, S, or M.
2
Press [m] ĺ d ĺ iFn Setting ĺ iFn Plus ĺ Metering ĺ
Quality.
3
Press [m].
4
Select iFn Setting ĺ Mode ĺ iFn Plus.
5
Press [m] to return to Shooting mode.
6
Press [i-Function] on an i-Function lens, and then press [N]
on the camera.
7
Select a photo quality option.
8
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
44
My Camera
Display icons
In Shooting mode
Icon
1
2
3
Focal length*
Notification panel bar
Optical Image Stabilization (OIS) (p. 94)
Manual focus scale
Z on
Level gauge (p. 46)
Z ratio
Histogram (p. 165)
RAW file
Face detection
White Balance (p. 81)
White Balance micro adjustment
Dynamic Range (p. 109)
OLED Color (p. 80)
Exposure adjustment value
ISO sensitivity (p. 79)
3. Shooting options (Touch)
Icon
Description
Change Smart mode**
* This icon appears when you attach the Power Zoom lens.
** Photos that were captured without inserting a memory
card cannot be transferred to a memory card or a computer.
Save a custom mode***
2. Shooting options
Touch AF options
AutoShare
Description
Shooting options
Auto exposure lock (p. 112)
Photo size
Smart panel
Auto focus lock (p. 112)
Drive mode
Available number of photos
Flash (p. 101)
Battery percentage
Flash intensity adjustment
Auto focus frame
Metering (p. 106)
Spot metering area
AF mode (p. 84)
Memory card not inserted**
100%
Camera shake
Aperture value
Shooting mode
Current time
Focus area
Shutter speed
Description
Description
: Fully charged
: Partially charged
(Red): Empty (recharge
the battery)
•
: Charging
Focus
1. Shooting information
Current date
Icon
•
•
•
Capturing photos
Icon
Description
Icon
** This icon appears only when you select Smart mode.
***This icon appears when you select Custom1 or Custom2
mode.
The icons displayed will change according to the
mode you select or the options you set.
45
My Camera >
Display icons
Recording videos
Icon
Description
1
Video sound level
2
2. Shooting options
Icon
About the level gauge
The level gauge helps you align the camera with
the horizontal and vertical lines on the display.
If the level gauge is not level, calibrate the level
gauge using the Horizontal Calibration function.
(p. 169)
Vertical
Description
Video size
AF mode (p. 84)
1. Shooting information
Icon
Description
Shooting mode
Cancel Touch AF.
100%
Metering (p. 106)
White Balance (p. 81)
White Balance micro adjustment
Optical Image Stabilization (OIS) (p. 94)
Current recording time/
Available recording time
Digital Image Stabilization (DIS) (p. 115)
Battery percentage
Fader (p. 116)
•
•
•
: Fully charged
: Partially charged
(Red): Empty (recharge
the battery)
•
: Charging
Multi Motion (p. 115)
Zoom indicator*
OLED Color (p. 80)
Exposure value
Horizontal
S Level
S Unlevel
You cannot use the level gauge when you shoot
in portrait orientation.
Voice recording off (p. 116)
Internal microphone in use
Zoom button*
* This icon appears when you attach the Power Zoom lens.
ISO sensitivity (p. 79)
The icons displayed will change according to the
mode you select or the options you set.
46
My Camera >
Display icons
In Playback mode
Viewing photos
1
Playing videos
Stop
Mode
F No
Shutter
ISO
Metering
Flash
Focal Length
White Balance
EV
Photo Size
Folder No.-File No.
Date & Time
Icon
2
Information
3
Icon
Description
Description
No.
Description
View image thumbnails. (Touch)
1
2
Captured photo
Playback speed
RGB histogram (p. 165)
Multi Motion
Shooting mode, Metering, Flash,
White Balance, Aperture value, Shutter
speed, ISO, Focal length, Exposure value,
Photo size, Folder number-File number,
Date
Current playback time
Current file/The total number of files
Notification panel bar
Share a file. (Touch)
m
Capture
Playback/Editing menu (Touch)
RAW file
3D file
3
Video length
/
View previous file/Scan backward.
(Each time you touch the scan
backward icon, you change the scan
speed in this order: 2X, 4X, 8X.)
/
Pause or resume playback.
/
View next file/Scan forward. (Each
time you touch the scan forward
icon, you change the scan speed in
this order: 2X, 4X, 8X.)
Protected file
Adjust the volume or mute the
sound.
47
My Camera >
Display icons
Changing the information displayed
Viewing the notification panel
Touch
at the top of the display to open the notification panel. You
can adjust the display brightness or view battery life and data storage
information. If you have changed the camera's default settings for photo
size and quality, exposure value, and ISO sensitivity, you can view the
changed settings. Touch the bottom of the notification panel or press
[m] or [f] to close it.
Display Brightness
Auto
Press [D] repeatedly to change the display type.
Storage & Battery Level
Storage
10 shot(s)
Battery Level
Changed Camera Settings
Mode
Display type
• Basic shooting information (Shooting mode, Shutter
speed, Aperture value, Exposure value, ISO sensitivity, etc.)
• Basic shooting information + Shooting option buttons
(MENU, Fn, AutoShare, Touch AF) + Level gauge
• Basic shooting information + Shooting option buttons +
Shooting
Playback
Current shooting options information (Photo size, Drive
mode, Flash, Metering, AF mode, etc.)
• Basic shooting information + Shooting option buttons +
Current shooting options information + Histogram + Date
and time
• No information (when connected to an HDTV or an HDMIenabled monitor)
• Basic information
• Display all information about the current file.
• Display all information about the current file including
RGB histogram.
48
My Camera
Lenses
You can purchase optional lenses made exclusively for your NX series
camera.
Learn about the functions of each lens and select one that suits your needs
and preferences.
Lens layout
SAMSUNG 18-55 mm F3.5-5.6 OIS III lens (example)
8
1
2
No.
Description
1
2
Lens mount index
3
Focus ring (p. 92)
4
Lens hood mount index
5
Lens
6
i-Function button (p. 64)
7
AF/MF switch (p. 84)
8
Lens contacts
Zoom ring
When not using the lens, attach the lens cap and lens mount cover to protect
the lens from dust and scratches.
3
4
5
6
7
49
My Camera >
Lenses
SAMSUNG 20-50 mm F3.5-5.6 ED II lens (example)
Locking or unlocking the lens
7
To lock the lens, pull and hold the zoom lock switch away from the camera
body and rotate the zoom ring as shown in the illustration.
1
2
6
3
5
4
No.
Description
1
2
Lens mount index
3
Lens
4
Focus ring (p. 92)
5
i-Function button (p. 64)
6
Zoom ring
7
Lens contacts
Zoom lock switch
50
My Camera >
Lenses
To unlock the lens, rotate the zoom ring as shown in the illustration until
you hear the click.
SAMSUNG 16 mm F2.4 lens (example)
5
1
2
3
4
You cannot capture a photo when the lens is locked.
No.
Description
1
2
3
i-Function button (p. 64)
4
Lens
5
Lens contacts
Lens mount index
Focus ring (p. 92)
51
My Camera >
Lenses
Lens markings
No.
Find out what the numbers on the lens signify.
1
Description
Aperture value
SAMSUNG 18-200 mm F3.5-6.3 ED OIS lens (example)
A range of supported aperture values. For example, 1:3.5–6.3 means
the maximum aperture value range from 3.5 to 6.3.
Focal length
2
The distance from the middle of the lens to its focal point (in
millimeters). This figure is expressed in a range: minimum focal length
to maximum focal length of the lens.
Longer focal lengths result in narrower angles of view and the subject
is magnified. Shorter focal lengths result in wider angles of view.
ED
3
ED stands for Extra-low Dispersion. Extra-low dispersion glass is
effective in minimizing chromatic aberration (a distortion that occurs
when a lens fails to focus all colors to the same convergence point).
OIS (p. 94)
1
2
3 4 5
4
Optical Image Stabilization. Lenses with this feature can detect
camera shake and effectively cancel out the movement inside the
camera.
Ø
5
The lens diameter. When you attach a filter to the lens, make sure that
the diameters of the lens and the filter are the same.
52
My Camera
Accessories
You can use accessories such as external flash that can help you capture
better and more convenient photos.
For more information about optional accessories, refer to the manual for
each accessory.
External flash layout
SEF220A (example) (optional)
7
• The illustrations may differ from the actual items.
• You can purchase Samsung-approved accessories at a retailer or a Samsung
service center. Samsung is not responsible for damage caused by using
another manufacturer's accessories.
8
1
2
3
6
5
4
No.
Description
1
Display icons
2
READY lamp/Test button
3
MODE button
4
Flash release button
5
Power button
6
Battery cover
7
Bulb
8
TELE/WIDE mode switch
9
Hot-shoe connection
9
53
My Camera >
Accessories
Connecting the external flash
1
Remove the hot-shoe cover from the camera.
3
Press the power button on the flash.
• You can capture a photo with a flash that is not fully charged, but it is
recommended to use a fully charged flash.
• The available options may differ depending on the shooting mode.
• There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
• For more details about optional flashes, refer to the user manual for the flash.
Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.
2
Mount the flash by sliding it into the hot-shoe.
• To release the flash, gently pull the flash while you press the PUSH
button.
54
My Camera
Shooting modes
Two simple shooting modes—Smart Auto and Smart mode—help you
capture photos with numerous automatic settings. Additional modes
allow for greater customization of settings.
Icon
t Smart Auto mode
In Smart Auto mode, the camera recognizes surrounding conditions
and automatically adjusts factors that contribute to exposure, including
shutter speed, aperture value, metering, White Balance, and exposure
compensation. As the camera controls most of the functions, some
shooting functions are limited. This mode is useful for capturing quick
snapshots with the least amount of adjustment.
Description
t
Smart Auto mode (p. 55)
P
Program mode (p. 57)
A
Aperture Priority mode (p. 59)
S
Shutter Priority mode (p. 60)
M
Manual mode (p. 61)
T
Custom mode 1 (p. 63)
U
Custom mode 2 (p. 63)
i
Lens Priority mode (p. 64)
s
Smart mode (p. 66)
B
Wi-Fi features (p. 134)
55
My Camera >
Shooting modes
1
Rotate the mode dial to t.
2
Align your subject in the frame.
3
Half-press [Shutter] to focus.
Portraits
• The camera selects a scene. An appropriate scene icon appears at
Close-up photos of objects
Icon
Description
Landscapes with backlighting
Portraits with backlighting
the screen.
Close-up photos of text
Sunsets
Indoors, dark
A
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
Forested areas typically consist of green-colored subjects
Close-up photos of colorful subjects
Recognizable scenes
Icon
Description
Camera is stabilized on a tripod and the subject is not moving for a
certain period of time. (when shooting in the dark)
Landscapes
Actively moving subjects
Scenes with bright white backgrounds
Fireworks (when using a tripod)
Landscapes at night
Portraits at night
4
Press [Shutter] to capture the photo.
56
My Camera >
Shooting modes
• The camera may detect different scenes, even the same subjects, depending
•
•
•
•
on external factors such as camera shake, lighting, or distance to the subject.
If the camera does not recognize an appropriate scene mode, it uses the
default settings for the Smart Auto mode.
Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
Even if you use a tripod, the camera may not detect the tripod mode ( ) if
the subject is moving.
The camera consumes more battery power, because it changes settings often
to select appropriate scenes.
P Program mode
The camera automatically adjusts shutter speed and aperture value so that
an optimal exposure value can be achieved.
This mode is useful when you want to capture shots of constant exposure
while being able to adjust other settings.
1
Rotate the mode dial to P.
2
Set the desired options.
3
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
57
My Camera >
Shooting modes
Program Shift
Program Shift function lets you adjust the shutter speed and aperture
value while the camera maintains the same exposure. When you scroll
the command dial to the left or rotate the navigation button counterclockwise, the shutter speed decreases and the aperture value increases.
When you scroll the command dial to the right or rotate the navigation
button clockwise, the shutter speed increases and the aperture value
decreases.
Minimum shutter speed
Set the shutter speed not to be slower than the selected speed. However, if
an optimal exposure value cannot be achieved because the ISO sensitivity
reached the maximum ISO value that is set by Auto ISO Range, shutter
speed may be slower than the selected minimum shutter speed.
To set the minimum
shutter speed,
In Shooting mode, press [m] ĺ b ĺ Minimum
Shutter Speed ĺ an option.
• This feature is available only when the ISO sensitivity is set to Auto.
• This feature is available only in Program or Aperture Priority mode.
58
My Camera >
Shooting modes
A Aperture Priority mode
1
Rotate the mode dial to A.
In Aperture Priority mode, the camera automatically calculates shutter
speed according to the aperture value you choose.
2
Scroll the command dial or rotate the navigation button to
adjust the aperture value.
• You can also adjust the aperture value by pressing [f], moving
You can adjust the depth of field (DOF) by changing the aperture value.
This mode is useful for taking portraits, flowers, or landscape shots.
to the aperture value, and then scrolling the command dial or
dragging the screen.
3
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
• In low-light settings, you may need to increase the ISO sensitivity to prevent
blurred photos.
• To set the minimum shutter speed, in Shooting mode, press [m] ĺ b
ĺ Minimum Shutter Speed ĺ an option.
Large Depth of Field
Small Depth of Field
59
My Camera >
Shooting modes
S Shutter Priority mode
1
Rotate the mode dial to S.
In Shutter Priority mode, the camera automatically adjusts the aperture
value according to the shutter speed you choose. This mode is useful for
capturing photos of fast-moving subjects or for creating tracer effects in a
photo.
2
Scroll the command dial or rotate the navigation button to
adjust the shutter speed.
• You can also adjust the shutter speed by pressing [f], moving to
the shutter speed, and then scrolling the command dial or dragging
the screen.
For example, set the shutter speed to over 1/500 s to freeze the subject. To
make the subject appear blurred set the shutter speed to below 1/30 s.
3
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
In order to compensate for the reduced amount of light allowed by fast shutter
speeds, open the aperture and let in more light. If your photos are still too dark,
increase the ISO value.
Slow shutter speed
Fast shutter speed
60
My Camera >
Shooting modes
M Manual mode
Manual mode lets you adjust the shutter speed and aperture value
manually. In this mode, you can fully control the exposure of your photos.
This mode is useful in controlled shooting environments, such as a studio,
or when it is necessary to fine-tune camera settings. The Manual mode is
also recommended for shooting night scenes or fireworks.
1
Rotate the mode dial to M.
2
Scroll the command dial to adjust the shutter speed.
3
Rotate the navigation button to adjust the aperture value.
Using Framing Mode
When you adjust the aperture value or shutter speed, the exposure
changes according to the settings, so the display may darken. With this
function on, the brightness of the display is constant regardless of the
settings, so you can better frame your shot.
To use Framing
Mode,
In Shooting mode, press [m] ĺ b ĺ Framing Mode
ĺ an option.
• You can also adjust the shutter speed or the aperture value by
pressing [f], moving to the shutter speed or the aperture value,
and then scrolling the command dial or dragging the screen.
4
Set the desired options.
5
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
61
My Camera >
Shooting modes
Using the Bulb function
Use the Bulb function to shoot night scenes or the night sky. While you are
pressing [Shutter], the shutter is left open so you can create moving light
effects.
To use a bulb,
Completely scroll the command dial to the left to Bulb ĺ Press
and hold [Shutter] for the desired time.
• If you set a high ISO value or open the shutter for a long time, image noise
may increase.
• Drive options, flash, and One touch shot cannot be used with the Bulb
function.
• The Bulb function is available only in Manual mode.
• Use a tripod and shutter release to prevent your camera from shaking.
• The longer you open the shutter, the longer it takes to save a photo. Do not
turn the camera off while the camera saves a photo.
• If you use this function for a long time, use a fully charged battery.
62
My Camera >
Shooting modes
T U Custom mode
4
Verify the shooting options, and then select Save.
Custom mode lets you create your own shooting modes by customizing
options and saving them. Save frequently used option settings and
then open it as your own shooting mode customized for the shooting
environment. Use custom mode when you capture photos in various
environments, you have preferred shooting settings, or you frequently use
preset options in certain conditions.
5
Use the on-screen keyboard to enter a name for the mode.
(p. 139)
6
Press [o] to save a mode.
You can save up to 10 custom modes.
Saving custom modes
1
Rotate the mode dial to P, A, S, M, T, or U.
2
Set shooting options.
3
Press [m], and then select d ĺ Manage Custom Mode
ĺ Save.
• You can also save a custom mode by touching
Selecting custom modes
1
Rotate the mode dial to T or U.
2
Press [m], and then select d ĺ Manage Custom Mode
ĺ Open ĺ a mode.
on the screen.
• If there is no custom mode saved, you can select a shooting mode
• You can also save a custom mode by pressing [f], and then
touching
from a pop-up window on the camera, set shooting options, and
save new custom modes.
.
3
Verify the shooting options, and then select OK.
63
My Camera >
Shooting modes
Deleting custom modes
i Lens Priority mode
1
Rotate the mode dial to P, A, S, M, T, or U.
2
Press [m], and then select d ĺ Manage Custom Mode
ĺ Delete.
1
Rotate the mode dial to i.
3
Select a mode to delete, and then press [n].
2
Press [i-Function] on the lens to select a setting.
Lens Priority mode lets you to adjust the depth of field or contrast of the
photo or use the Z function.
• You can also press [i-Function], and then press [D/I] or drag
the screen to select a setting.
64
My Camera >
Shooting modes
Option
Description
E
Adjust the depth of field to blur or sharpen the
background.
G
Adjust the contrast to increase or decrease the
shading differences in the photo.
Z
3
Zoom in on a subject with less degradation of photo
quality than the Digital zoom. However, the photo
resolution or size may change compared to when you
zoom in by rotating the zoom ring.
Adjust the focus ring to select an option.
4
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
• This function is not available when you attach a 3D lens and set 3D Auto
Mode in 3D mode.
• As you adjust the E option closer to
•
•
•
•
, the aperture value increases
and the shutter speed reduces. In dark conditions, photos may be blurry.
As you adjust the G option closer to +4, the shading differences in
the photo increase.
Z is not available when you set the shooting method to Burst.
Z is not available when you capture photos in the RAW file format.
Z is deactivated when you record videos by pressing the video
recording button.
• You can also scroll the command dial or rotate the navigation
button or drag the screen to select an option.
65
My Camera >
Shooting modes
s Smart mode
In Smart mode, you can capture photos with options that are preset for a
specific scene.
1
Rotate the mode dial to s.
2
Select a scene.
Portrait
Drag to navigate options.
Switch to the grid view.
Option
Description
Beauty Face
Capture a portrait with options to hide facial
imperfections.
Best Face
Capture multiple photos and replace faces to create
the best possible image.
Landscape
Capture still-life scenes and landscapes.
Macro
Capture small or close-up subjects.
Action Freeze
Capture subjects moving at high speed.
Rich Tones
Capture a photo with vibrant colors.
Panorama
Capture a wide panoramic scene in a single photo.
Waterfall
Capture scenes with waterfalls.
Multi Exposure
Capture multiple photos and overlap them to create
one photo.
Creative Shot
Capture photos with effects applied automatically.
Smart Jump Shot
Set an area to automatically capture a jumping subject
when movement is detected.
Silhouette
Capture subjects as dark shapes against a light
background.
Switch to the list view.
66
My Camera >
Shooting modes
Option
Description
Sunset
Capture scenes at sunset, with natural-looking reds
and yellows.
Night
Capture multiple photos in low light conditions
without a flash. The camera combines them to create a
single image that is brighter and has less blurring.
Fireworks
Capture scenes with fireworks.
Light Trace
Capture scenes with the light trailing in low-light
conditions.
Some options are not available when you use the viewfinder.
3
Half-press [Shutter] to focus, and then press [Shutter] to
capture.
67
My Camera >
Shooting modes
5
Using the Best Face mode
• Repeat steps 4 and 5 to replace the rest of the faces in the photo.
In Best Face mode, you can capture multiple photos and replace faces to
create the best possible image. Use this mode to select the best image for
each individual when capturing group photos.
1
Rotate the mode dial to s, and then select Best Face.
2
Align your subject in the frame, and then half-press [Shutter]
to focus.
3
Press [Shutter] to capture the photo.
Touch the best image from the 5 faces that were captured.
• The
• Touch
icon will appear on the image that the camera recommends.
to hide the captured faces.
• The camera captures 5 photos consecutively.
• The first photo is set as the background image.
• The camera automatically detects faces after shooting.
4
Touch a face to replace.
Back
Save
6
Press [o] to save the photo.
• Use a tripod to prevent your camera from shaking.
• The resolution is set to 5.9M or less.
68
My Camera >
Shooting modes
Capturing panoramic photos
5
Capture a 2D or 3D panoramic photo. Captured 3D panoramic photos can
be viewed only on a 3D TV or 3D monitor.
With [Shutter] pressed, slowly move the camera in the
direction you selected.
• In 3D Panorama mode, you can capture a scene only in horizontal
directions.
1
Rotate the mode dial to s, and then select Panorama.
• An arrow toward the direction of motion is displayed, and the entire
shooting image is displayed in the preview box.
2
Press [m] ĺ b ĺ Panorama ĺ Live Panorama or 3D.
3
Press [m] to return to Shooting mode.
4
Press and hold [Shutter] to start shooting.
• When the scenes are aligned, the camera captures the next photo
automatically.
6
When you are finished, release [Shutter].
• The camera will automatically save the shots into one photo.
• If you release [Shutter] while shooting, the panoramic shooting
stops and photos that have been captured are saved.
69
My Camera >
Shooting modes
• The resolution varies depending on the panoramic photo you captured.
• In Panorama mode, some shooting options are not available.
• The camera may stop shooting due to the shooting composition or the
subject's movement.
• In Panorama mode, your camera may not capture the entire last scene if you
•
•
•
•
stop moving the camera to improve the photo quality. To capture the entire
scene, move your camera slightly beyond the point where you want the
scene to end.
In 3D Panorama mode, your camera may not capture the very beginning or
end of a scene due to the nature of the 3D effect. To capture the entire scene,
move slightly beyond the beginning and end points you want to capture.
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG files.
To view 3D files, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
Capturing photos in 3D Panorama mode may result in a less pronounced 3D
effect than those captured with a 3D lens. To increase the 3D effect, attach
the optional 3D lens and use 3D mode. (p. 73)
• For best results when capturing panoramic photos, avoid the following:
- moving the camera too quickly or too slowly
- moving the camera too little to capture the next image
- moving the camera at irregular speeds
- shaking the camera
- shooting in dark places
- capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing
• Photos taken are automatically saved, and shooting is stopped under the
following conditions:
- if you change the shooting direction while shooting
- if you move the camera too rapidly
- if you do not move the camera
70
My Camera >
Shooting modes
Using the Smart Jump Shot mode
4
• The AF-assist light/Timer lamp will blink for 5 seconds. Informs the
In Smart Jump Shot mode, you can set an area to capture a jumping
subject. The camera will automatically capture a photo when movement is
detected.
1
2
Rotate the mode dial to s, and then select Smart Jump
Shot.
Drag the box on the screen to the desired location.
Press [Shutter] or [o] to capture the photo.
subject to get ready to jump while the lamp is blinking.
• When a subject is detected within the box on the screen after the
AF-assist light/Timer lamp stops blinking, the camera will capture 5
photos consecutively.
5
Touch the best image from the 5 photos to select it.
6
Press [o] to save the photo.
• Press [m] to return to Shooting mode without saving the
photo.
• Use a tripod to prevent your camera from shaking.
• In dark environments the camera cannot capture photos.
3
Drag the corners of the box to adjust its size to fit the jumping
subject (one person).
71
My Camera >
Shooting modes
Recording a video
In Shooting mode, you can record Full HD videos (1920X1080) by pressing
(Video recording). The camera lets you record a video up to 29 minutes
and 59 seconds until the size of a movie file becomes 4 GB in length at 60,
30, 24, or 15 fps, and saves the files in MP4 (H.264) format. (For 1920X1080
(60 fps), you can record up to 21 minutes and 15 seconds.) 60 fps is
available only with 1920X1080 and 1280X720 and 24 fps is available only
with 1920X810. 15 fps is available only with some Smart Filter options. The
sound is recorded via the camera's microphone. (If you attach an external
microphone, the sound will be recorded via the external microphone.)
1
Rotate the mode dial to t, P, A, S, M, T, U, i, or
s.
• This feature may not work in some modes.
2
Set the desired options.
3
Press
(Video recording) to start recording.
4
Press
(Video recording) again to stop.
You can set the exposure by adjusting the aperture value and shutter
speed for the mode you selected. When you use a lens that does not have
an AF/MF switch while recording a video, press [F] to deactivate or
activate the AF function. When you use the lens that has an AF/MF switch,
the AF function works according to the switch’s setting.
• H.264 (MPEG-4 part10/AVC) is the latest video coding format established
Select Fader to fade in or out a scene. You can also select Voice, Wind Cut,
or other options to set recording options. (p. 116)
•
•
•
•
•
in 2003 collaboratively by ISO-IEC and ITU-T. Since this format uses a high
compression rate, more data can be saved in less memory space.
If you have the image stabilizer option on when shooting a movie, the
camera may record the image stabilizer sound.
The zoom sound or other lens sounds may be recorded if you adjust the lens
while recording a video.
When using an optional video lens, the autofocus noise is not recorded.
If you remove the camera lens while recording a movie, the recording will be
interrupted. Do not change the lens while recording.
If you attach or remove an external microphone while recording a movie,
sound will be recorded via the camera's microphone.
72
My Camera >
Shooting modes
• If you change the shooting angle of the camera suddenly while shooting a
•
•
•
•
•
•
•
movie, the camera may not be able to record images accurately. Use a tripod
to minimize camera shake.
The camera supports only the Multi AF function when recording a video. You
cannot use any other focus area setting functions, such as Face Detection AF.
When the size of a movie file exceeds 4 GB, the camera automatically stops
recording even if the maximum recording time (29 minutes and 59 seconds)
has not been reached.
If you use a slow writing memory card, the recording of your movie can
be interrupted because the card cannot process data at the rate the video
is being shot. If this occurs, replace the card with a faster memory card or
reduce the video size (for example, from 1280X720 to 640X480).
When formatting a memory card, always format using the camera. If you
format on another camera or a PC, you can lose files on the card or cause a
change in the capacity of the card.
When you press the video recording button, Z turns off.
While recording a video in the same ISO sensitivity, the screen may be darker
than taking a photo. Adjust the ISO sensitivity.
When you record a video in P, A, or S mode, ISO is automatically set to Auto.
3D mode
You can capture 3D photos or videos with an optional 3D lens.
SAMSUNG 45 mm F1.8 [T6] 2D/3D lens (example)
Set the 2D/3D switch on the lens to 3D, and then capture a photo or video
1.5–5 m away from the subject.
73
My Camera >
Shooting modes
• 3D mode is always on, regardless of the mode dial of the camera, except
B.
• To use auto 3D options that enable the camera to set shooting options
automatically depending on shooting conditions in 3D mode, press
[m] ĺ b ĺ 3D Auto Mode ĺ On.
•
•
•
•
•
•
• To change the 3D recording option, press [m] ĺ g ĺ
3D REC Mode ĺ a desired option.
•
* Default
Icon
Description
Side by Side*: Displays two images next to each other.
Frame Packing: Displays the images for the left and right eye
alternately in frames.
•
•
•
•
•
•
•
•
Available shooting options differ compared to other shooting modes.
You can select either 4.1M (2688X1512) or 2.1M (1920X1080) photo size.
The video resolution is set to 1920X1080.
Videos recorded in 3D may be dark or playback may be jittery.
Shooting in low temperatures may result in color distortion in images and
may consume more battery power.
You may not be able to shoot properly in conditions below 8.5 LV/900 lux. For
best results, capture photos in places with sufficient light.
When you photograph objects that contain polarizing material, such as a
display, sunglasses, or a polarizing filter, or use the polarizing material with
your lens, the images may appear dark or the 3D effect may not be applied
properly.
Use a tripod to prevent your camera from shaking.
If you rotate or tilt the camera vertically while shooting, the 3D effect may not
be applied properly. Capture images with the camera in the normal position.
If you shoot in fluorescent lighting or capture images displayed by projectors
or TVs, the images may appear black due to the flicker effect.
In 3D mode, the Enlarge x8 option of MF Assist may not be available.
The camera's display shows 3D videos only in 2D.
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG files.
To view 3D files, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
You cannot use the flash in 3D mode.
74
My Camera >
Shooting modes
Available functions by shooting mode
For details about shooting functions, see Chapter 2.
Press a shortcut for each function.
Function
Available in
Shortcut
AF Area (p. 87)
P/A/S/M/i*/s*
f/F
AF Mode (p. 84)
P/A/S/M/i*/s*/3D*
f
Drive (Single/
Continuous/Burst/
Timer/Bracketing)
(p. 95)
P/A/S/M/i*/s*/t*/3D*
Dynamic Range
(p. 109)
P/A/S/M
f
-
Function
Available in
Shortcut
Link AE to AF Point
(p. 108)
P/A/S/M
-
Metering (p. 106)
P/A/S/M
N
MF Assist (p. 92)
P/A/S/M/i/s/t/3D*
-
OIS (Anti-Shake) (p. 94) P/A/S/M/i/s*/t
-
OLED Color (p. 80)
P/A/S/M/i/s/t
-
Photo Size (p. 77)
P/A/S/M/i/s*/t/3D*
-
Picture Wizard (p. 83)
P/A/S/M/3D
f
Quality (p. 78)
P/A/S/M/i/s*
-
Smart Filter (p. 110)
P/A/S/M
f
Exposure
P/A/S/3D
compensation (p. 111)
f/W
Touch AF (p. 90)
P/A/S/M/i/s*/t/3D*
-
Exposure/Focus lock
(p. 112)
P/A/S/M
a
White Balance (p. 81)
P/A/S/M/3D*
f/C
Flash (p. 101)
P*/A*/S*/M*/i*/s*/t*
f
Focus Peaking (p. 93)
P/A/S/M/i/s/t
-
Framing Mode (p. 61)
P/A/S/M
-
Interval Capture
(p. 100)
P/A/S/M
-
ISO (p. 79)
P/A/S/M
f/I
* Some functions are limited in these modes.
75
Chapter 2
Shooting Functions
Learn about the functions you can set in Shooting mode.
You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions
Size and Resolution
Size and Resolution
Shooting Functions >
Photo size
* Default
Icon
As you increase the resolution, your photo or video will include more
pixels, so it can be printed on larger paper or displayed on a larger screen.
When you use a high resolution, the file size will also increase. Select a low
resolution for photos that will be displayed in a digital picture frame or
uploaded to the web.
To set the size,
In Shooting mode, press [m] ĺ b ĺ Photo Size ĺ
an option.
Size
Recommended for
(3:2) 5472x3648*
Printing on A0 paper.
(3:2) 3888x2592
Printing on A2 paper.
(3:2) 2976x1984
Printing on A4 paper.
(3:2) 1728x1152
Printing on A5 paper.
(16:9) 5472x3080
Printing on A1 paper or viewing on an
HDTV.
(16:9) 3712x2088
Printing on A3 paper or viewing on an
HDTV.
(16:9) 2944x1656
Printing on A4 paper or viewing on an
HDTV.
(16:9) 1920x1080
Printing on A5 paper or viewing on an
HDTV.
(1:1) 3648x3648
Printing a square photo on A1 paper.
(1:1) 2640x2640
Printing a square photo on A3 paper.
(1:1) 2000x2000
Printing a square photo on A4 paper.
(1:1) 1024x1024
Attaching to an email.
Available options may differ depending on shooting conditions.
77
Shooting Functions >
Size and Resolution
Quality
* Default
Icon
Format
Description
JPEG
Normal:
• Compressed for normal quality.
• Recommended for printing in small size or
uploading to the web.
RAW
RAW:
• Save a photo without data loss.
• Recommended for editing after shooting.
RAW+JPEG
RAW + S.Fine: Save a photo in both the JPEG
(S.Fine quality) and RAW format.
RAW+JPEG
RAW + Fine: Save a photo in both the JPEG (Fine
quality) and RAW format.
RAW+JPEG
RAW + Normal: Save a photo in both the JPEG
(Normal quality) and RAW format.
The camera saves photos in either the JPEG or RAW format.
Photos captured by a camera are often transformed to the JPEG format
and stored in the memory according to the settings of the camera at the
time of shooting. RAW files are not transformed to the JPEG format and are
stored in the memory without any changes.
RAW files have the file extension "SRW". To adjust and calibrate exposures,
White Balances, tones, contrasts, and colors of the RAW files, or to convert
them into JPEG or TIFF format, use the Adobe Photoshop Lightroom
program found on the supplied DVD-ROM.
Ensure you have enough space on the memory card to save photos in the
RAW format.
To set the quality,
In Shooting mode, press [m] ĺ b ĺ Quality ĺ
an option.
Available options may differ depending on shooting conditions.
* Default
Icon
Format
Description
JPEG
Super Fine*:
• Compressed for the best quality.
• Recommended for printing in large size.
JPEG
Fine:
• Compressed for better quality.
• Recommended for printing in normal size.
78
Shooting Functions
ISO sensitivity
ISO sensitivity
Shooting Functions >
The ISO sensitivity value represents the sensitivity of camera to light.
Examples
The larger the ISO value, the more sensitive the camera is to light.
Consequently, by selecting a higher ISO sensitivity value, you can capture
photos in dim or dark places at faster shutter speeds. However, this may
increase electronic noise and result in a grainy photo.
To set ISO sensitivity,
In Shooting mode, press [I] ĺ an option.
ISO 100
ISO 400
ISO 800
ISO 3200
• You can also set the option by pressing [m] ĺ b ĺ ISO ĺ an option
in Shooting mode.
• Increase the ISO value in places where flash use is prohibited. You can capture
a clear photo by setting a high ISO value without having to secure more light.
• Use the Noise Reduction function in order to reduce the visual noise that can
appear on photos of a high ISO value. (p. 161)
• Available options may differ depending on the shooting conditions.
79
Shooting Functions
OLED ColorOLED Color
Shooting Functions >
Set the camera to optimize colors for an OLED display when you capture
or play back photos. An OLED display has a wider color reproduction range
than a crystal liquid display and produces brighter, natural colors.
To set OLED Color,
In Shooting mode, press [m] ĺ b ĺ OLED Color
ĺ an option.
80
Shooting Functions
White Balance
White Balance
Shooting Functions >
White Balance represents the light source that influences on the color of a
photo.
The color of a photo depends on the type and quality of the light source.
If you want the color of your photo to be realistic, select an appropriate
lighting condition to calibrate the White Balance, such as Auto WB,
Daylight, Cloudy, Tungsten, or adjust color temperature manually.
You can also adjust color for the preset light sources so that the colors of
the photo match the actual scene under mixed lighting conditions.
To set the White
Balance,
Description
Auto WB*: Use automatic settings depending on the lighting
conditions.
Daylight: Select when taking outdoor photos on a sunny day. This
option results in photos closest to the natural colors of the scene.
Cloudy: Select when taking outdoor photos on a cloudy day or in
shadows. Photos captured on cloudy days tend to be more bluish
than on sunny days. This option offsets that effect.
Fluorescent White: Select when shooting under a daylight
fluorescent lamp, especially for white fluorescent light.
Description
N
Fluorescent NW: Select when shooting under a daylight
fluorescent lamp, especially for white fluorescent light of very
white hues.
D
Fluorescent Daylight: Select when shooting under a daylight
fluorescent lamp, especially for white fluorescent light of slightly
bluish hue.
Tungsten: Select when taking indoor photos under incandescent
bulbs or halogen lamps. Incandescent tungsten bulbs tend to have
a reddish hue. This option offsets that effect.
Flash WB: Select when using a flash.
In Shooting mode, press [C] ĺ an option.
* Default
Icon
* Default
Icon
Custom Set: Use your pre-defined settings. You can manually set
the White Balance by pressing [D], and then shooting a white
sheet of paper. Fill the spot metering circle with the paper and set
the White Balance.
Color Temperature: Manually adjust the color temperature of
the light source. Color temperature is a measurement in degrees
Kelvin that indicates the specific type of light source. You can get a
warmer photo with a higher value, and a cooler photo with a lower
value. Press [D], and then adjust the color temperature.
• You can also set the option by pressing [m] ĺ b ĺ White Balance
ĺ an option in Shooting mode.
• Available options may differ depending on shooting conditions.
81
Shooting Functions >
White Balance
Customizing preset White Balance options
Examples
You can also customize preset White Balance options.
To customize
preset options,
In Shooting mode, press [C] ĺ an option ĺ [D] ĺ
scroll the command dial or rotate the navigation button or press
[D/I/C/F].
Back
Set
White Balance : Daylight
Reset
Auto WB
Daylight
Fluorescent Daylight
Tungsten
You can also touch an area on the screen.
82
Shooting Functions
Picture Wizard
(photo
styles)
Picture Wizard
(photo
styles)
Shooting Functions >
Picture Wizard lets you apply different photo styles to your photo to create
various looks and emotional moods. You can also create and save your
own photo styles by adjusting color, saturation, sharpness, and contrast for
each style.
There is no rule for which style is suitable in which conditions. Experiment
with different styles and find your own settings.
To set a photo style,
In Shooting mode, press [m] ĺ b ĺ Picture Wizard
ĺ an option.
Examples
Standard
Vivid
Portrait
Landscape
Forest
Retro
Cool
Calm
Classic
• You can also adjust the value of the preset style settings. Select a Picture
Wizard option, press [D], and then adjust color, saturation, sharpness, or
contrast.
• To customize your own picture wizard, select , , or , and then adjust
the color, saturation, sharpness, and contrast.
• Picture Wizard options cannot be set with Smart Filter options at the same
time.
83
Shooting Functions
AF mode AF mode
Shooting Functions >
Learn how to adjust the camera’s focus according to the subjects.
You can select a focusing mode appropriate to the subject among Single
Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is
activated when you press [Shutter] halfway. In the MF mode, you have to
rotate the focus ring on the lens to focus manually.
In most cases, you can have a focus by selecting Single AF. Fast moving
subjects or subjects with small shading differences to the background are
difficult to focus. Select an appropriate focusing mode for such instances.
To set the auto
focus mode,
In Shooting mode, press [F] ĺ an option.
• You can also set the option by pressing [m] ĺ b ĺ AF Mode ĺ
an option in Shooting mode.
• The available options may differ depending on the lens in use.
If your lens has an AF/MF switch, you must set the switch according to
the selected mode. Set the switch to AF when you select Single AF or
Continuous AF. Set the switch to MF when you select Manual Focus.
When your lens has no AF/MF switch, press [F] to select a desired AF
mode.
84
Shooting Functions >
AF mode
Single AF
Continuous AF
Single AF is appropriate for shooting a still subject. When you press
[Shutter] halfway, the focus fixes in the focus area. The area turns green
when the focus is achieved.
While you are pressing [Shutter] halfway, the camera continues to
automatic focusing. Once the focus area is fixed on the subject, the subject
is always in focus even when moving. This mode is recommended for
shooting a person on a bicycle, a running dog, or a car racing scene.
85
Shooting Functions >
AF mode
Manual focus
You can manually focus on a subject by rotating the focus ring on the
lens. The MF Assist function lets you easily achieve a focus. While you are
rotating the focus ring, the focus area is magnified. When you use the
Focus Peaking function, the color you selected appears on the focused
subject. This mode is recommended for shooting an object similar in color
to the background, a night scene, or fireworks.
If you use this function, you cannot set Touch AF, AF Area, and Link AE to AF
Point options.
86
Shooting Functions
AF area
Shooting Functions >
AF area
The AF area function changes the positions of the focus area.
Selection AF
Generally, cameras focus on the nearest subject. When there are a lot of
subjects, however, unwanted subjects can be in focus. In order to prevent
unwanted subjects from being in focus, change the focus area so that
a desired subject is in focus. You can get a clearer and sharper photo by
selecting an appropriate focus area.
You can set the focus on an area you want. Apply an out-of-focus effect to
make the subject more distinguishable.
To set the auto
focus area,
The focus on the photo below was repositioned and resized so that it fits
the subject’s face.
In Shooting mode, press [m] ĺb ĺ AF Area ĺ
an option.
• Available options may differ depending on shooting conditions.
• When the AF/MF switch is set to MF, you cannot change the AF area from the
shooting menu.
• When you use the Face Detection AF option, the camera focuses on the area
with the white frame automatically.
• Depending on the Picture Wizard options, Face Detection may not be
effective.
• When you set manual focus, Face Detection may not be available.
• Face Detection may not be effective when:
- the subject is far from the camera
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
To resize or move the focus area, in Shooting mode, press [o]. Use the
navigation button to move the focus area. Scroll the command dial to resize
the focus area. When you use the viewfinder, press [f] to select a focus area
conveniently.
87
Shooting Functions >
AF area
Multi AF
Face Detection AF
The camera displays a green rectangle in places where focus is set
correctly. The photo is divided into two or more areas, and the camera
obtains focus points of each area. It is recommended for scenery photos.
The camera focuses on human faces preferentially. Faces of up to
10 people can be detected. This setting is recommended for shooting a
group of people.
When you press [Shutter] halfway, the camera displays the focus areas as
shown in the photo below.
When you press [Shutter] halfway, the camera focuses on faces as shown
in the photo below. In cases of shooting a group of people, the camera
displays the focus on the nearest person’s face in white and the rest of the
people’s faces in gray.
88
Shooting Functions >
AF area
Self-Portrait AF
It can be difficult to check whether your face is in focus when you are
taking a self-portrait. When this function is on, the beep from the camera
gets faster when your face is located at the center of the composition.
89
Shooting Functions
Touch AF Touch AF
Shooting Functions >
Select or focus on an area that you touch on the screen. Additionally, focus
on the subject and capture a photo by touching on the screen.
To set Touch AF,
In Shooting mode, press [m] ĺb ĺTouch AF ĺ
an option.
Available options may differ depending on the shooting conditions.
Tracking AF
Tracking AF allows you to track and automatically focus on your subject,
even when the subject is moving or when you change the shooting
composition.
White frame: Your camera is
tracking the subject.
Touch AF
Touch AF allows you to select and focus on the focus area that you touch
on the screen.
Green frame: Your subject is
in focus when you half-press
[Shutter].
Red frame: Your camera failed to
focus.
AF Point
The focus area will correspond to the area you touch on the screen and the
focus will not be achieved.
90
Shooting Functions >
Touch AF
• If you do not select a focus area, the Auto Focus function does not work.
• Tracking a subject may fail when:
- the subject is too small
- the subject moves irregularly
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
- you capture photos continuously
• When tracking fails, the feature will be reset.
• If the camera fails to track the subject, the focus area will be reset.
• If the camera fails to focus, the focus frame will change to red and the focus
One touch shot
You can capture a photo with the touch of your finger. As you touch a
subject, the camera focuses on the subject automatically and captures a
photo.
will be reset.
91
Shooting Functions
Focus assist
Focus assist
Shooting Functions >
In the manual focus mode, you have to rotate the focus ring on the lens to
focus. When you use the MF Assist function or the Focus Peaking function,
you can achieve a clearer focus. This function is only available on a lens
that supports manual focus.
You can also use the Direct Manual Focus (DMF) function to adjust the
focus manually. After focusing with the Auto Focus function, adjust the
focus by rotating the focus ring.
* Default
Option
Description
Off
Do not use the MF Assist function.
The focus area is magnified by 5 times when you rotate the
focus ring.
Enlarge x5*
MF Assist
In the manual focus mode, you can enlarge the scene and easily adjust the
focus while rotating the focus ring.
To set the manual
focus assist,
The focus area is magnified by 8 times when you rotate the
focus ring.
In Shooting mode, press [m] ĺ b ĺ MF Assist ĺ
an option.
Enlarge x8
92
Shooting Functions >
Focus assist
Focus Peaking
DMF (Direct Manual Focus)
In the manual focus mode, the color you selected appears on the focused
subject to help you focus while rotating the focus ring.
You can adjust the focus manually by rotating the focus ring after
achieving the focus by half-pressing [Shutter]. This feature may not be
available with some lenses.
To set Focus
Peaking options,
In Shooting mode, press [m] ĺ b ĺ Focus Peaking ĺ
an option.
To set the DMF
function,
In Shooting mode, press [m] ĺ d ĺ DMF ĺ an option.
* Default
Option
Description
Level
Set a sensitivity for detecting the focused subject.
(Off, High, Normal*, Low)
Color
Set a color to appear on the focused subject.
(White*, Red, Green)
Setting DMF responsiveness
Set the focus ring's response when you use the DMF function. If you select
High, slight rotations of the focus ring are made to adjust the focus. If you
select Low, longer rotations of the focus ring are made to adjust the focus.
This feature is supported only when you attach a lens that has this feature.
To set DMF
Resposiveness
options,
In Shooting mode, press [m] ĺ d ĺ DMF
Responsiveness ĺ an option.
93
Shooting Functions
Optical Image
(OIS)
OpticalStabilization
Image Stabilization
(OIS)
Shooting Functions >
Use the Optical Image Stabilization (OIS) function to minimize camera
shake. OIS may not be available with some lenses.
Camera shake tends to occur in dark places or when shooting indoors.
In such cases, the camera uses slower shutter speeds in order to increase
the amount of light taken in, which can result in a blurry photo. You can
prevent this situation by using the OIS function.
If your lens has an OIS switch, you have set the switch to ON to use the OIS
function.
Without OIS correction
To set OIS options,
In Shooting mode, press [m] ĺb ĺ OIS (Anti-Shake)
ĺ an option.
* Default
Icon
Description
• OIS may not function properly when:
- you move your camera to follow a moving subject
- there is too much camera shake
- the shutter speed is slow (for example, when you select Night in
s mode)
Off: The OIS function is off. (This option may not be available with
some lenses.)
Mode 1*: The OIS function is applied only when you press
[Shutter] in full or half.
Mode 2: The OIS function is on.
With OIS correction
- the battery is low
- you capture a close-up shot
• If you use the OIS function with a tripod, your images may be blurred by
•
•
•
•
•
the vibration of the OIS sensor. Deactivate the OIS function when you use a
tripod.
If the camera is hit or dropped, the display will be blurry. If this occurs, turn off
the camera, and then turn it on again.
Use the OIS function only when needed because the function consumes
more battery power.
To set an OIS option on the menu, set the OIS switch on your lens to ON.
This option may not be available with some lenses.
Off may not be available with some lenses.
94
Shooting Functions
Drive (shooting
method)
Drive (shooting
method)
Shooting Functions >
You can set the shooting method, such as Continuous, Burst, Timer, or
Bracketing.
Select Single to capture one photo at a time. Select Continuous or Burst
to shoot fast moving subjects. Select AE Bracket, WB Bracket, P Wiz
Bracket, or Depth Bracket to adjust exposure, White Balance, apply
picture Wizard effects, or capture photos with different depths of field. You
can also select Timer to capture a photo automatically after a specified
time.
Available options may differ depending on shooting conditions.
Icon
Description
H
Single (p. 96)
J
Continuous (p. 96)
K
Timer (p. 97)
L
Bracketing (p. 98)
Do not rotate the drive dial beyond the permitted limits. Doing so may damage
the camera.
95
Shooting Functions >
Drive (shooting method)
Single
Continuous
Capture one photo whenever you press [Shutter]. Recommended for
general conditions.
Continuously capture photos while you are pressing [Shutter]. You can
capture up to 4 photos (Continuous Normal) or 9 photos (Continuous
High) per second.
To set the shooting
method,
Rotate the drive dial to H.
To set the shooting
method,
Rotate the drive dial to J, press [m] ĺ b ĺ Drive
Settings ĺ Continuous ĺ Continuous High or Continuous
Normal.
If you select Continuous High, the noise reduction function is not available.
96
Shooting Functions >
Drive (shooting method)
Burst
Timer
Consecutively capture up to 10 shots per second (3 seconds), 15 shots per
second (2 seconds), or 30 shots per second (1 second) when you press
[Shutter] once. It is recommended for shooting the rapid motion of fast
moving subjects such as racing cars.
Capture a photo after a specified time. You can also set the shooting
interval, number of shots, and shooting time.
To set the shooting
method,
•
•
•
•
•
•
•
To set the shooting
method,
Rotate the drive dial to K.
Rotate the drive dial to J, press [m] ĺ b ĺ Drive
Settings ĺ Continuous ĺ Burst ĺ press [F] and set the
number of shots.
The photo size is set to 5M.
It may take longer to save a photo.
You cannot use the flash with this option.
Shutter speed must be faster than 1/30 second.
Photos captured with this option may be slightly enlarged when saving.
You cannot set an ISO option higher than ISO 3200.
This option cannot be used with the RAW file format and is not available
when the photo quality is set to RAW.
• Press [Shutter] to stop capturing.
• To set the timer details, set the drive dial to K, press [m] ĺ b ĺ
Drive Settings ĺ Timer ĺ set the shooting interval, number of shots, and
shooting time.
97
Shooting Functions >
Drive (shooting method)
Auto Exposure Bracketing (AE Bracket)
White Balance Bracketing (WB Bracket)
When you press [Shutter], the camera captures 3 consecutive photos: the
original, one a step darker, and one a step lighter. Use a tripod to prevent
blurry photos as the camera captures three photos continuously. You can
adjust the settings in Bracketing Settings menu.
When you press [Shutter], the camera captures 3 consecutive photos:
the original and two more with different White Balance settings. The
original photo is captured when you press [Shutter]. The other two are
automatically adjusted according to the White Balance you have set. You
can adjust the settings in Bracketing Settings menu.
To set the shooting
method,
Rotate the drive dial to L, press [m] ĺ b ĺ Drive
Settings ĺ Bracket ĺ AE Bracket.
To set the shooting
method,
Rotate the drive dial to L, press [m] ĺ b ĺ Drive
Settings ĺ Bracket ĺ WB Bracket.
Exposure +2
Exposure -2
Original
WB+2
WB-2
Original
This option cannot be used with the RAW file format. Selecting this option will
change the photo quality from RAW to JPEG.
98
Shooting Functions >
Drive (shooting method)
Picture Wizard Bracketing (P Wiz Bracket)
Depth Bracketing
When you press [Shutter], the camera captures three consecutive photos,
each with a different Picture Wizard setting. The camera captures a photo
and applies the three Picture Wizard options you have set to the image
captured. You can select three different settings in Bracketing Settings
menu.
When you press [Shutter], the camera captures three consecutive photos,
each with a different depth of field by adjusting the aperture value. Use
a tripod to prevent blurry photos as the camera captures three photos
continuously. You can adjust the settings in Bracketing Settings menu.
To set the shooting
method,
Rotate the drive dial to L, press [m] ĺ b ĺ Drive
Settings ĺ Bracket ĺ P Wiz Bracket.
To set the shooting
method,
Rotate the drive dial to L, select [m] ĺ b ĺ Drive
Settings ĺ Bracket ĺ Depth Bracket.
This feature is available only in Program or Aperture priority mode.
Bracketing Settings
Retro
Vivid
Standard
This option cannot be used with the RAW file format. Selecting this option will
change the photo quality from RAW to JPEG.
You can set up the options for each bracketing. (p. 162)
To set a bracketing
option,
In Shooting mode, press [m] ĺ d ĺ Bracketing
Settings ĺ an option.
99
Shooting Functions
Interval Capture
Interval Capture
Shooting Functions >
Set the shooting interval and the number of shots to be captured
automatically. Use this function to capture photos at regular intervals
during an event such as a lunar eclipse or a sunrise.
To capture an
interval shot,
In Shooting mode, press [m] ĺ b ĺ Interval Capture
ĺ a shooting interval and the number of shots ĺ press [o] or
[Shutter] to save the settings ĺ press [Shutter] to capture the
photo.
•
•
•
•
Touch
to pause while capturing photos.
Touch
to resume.
Touch
or press [Shutter] to stop capturing.
Shooting intervals can be set to seconds if the shooting interval is less than
one minute. For intervals longer than one minute, intervals can be set to
minutes and hours only.
• Use a shutter release cable with a tripod to minimize camera movement
when capturing interval shots.
• Connect the power cable if the shooting interval is long or the number of
shots to be taken is high.
• If the shooting interval is set to between one minute and 10 minutes, the
camera will enter Display save mode after it starts to capture a photo. If a
shooting interval exceeds 10 minutes, the camera will enter Power save mode
and turn on and capture a photo automatically at the next interval. Press
[Shutter] to cancel Power save mode.
100
Shooting Functions
Flash
Shooting Functions >
Flash
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a flash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
To set flash options,
Icon
Icon
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
In Shooting mode, press [m] ĺ b ĺ Flash ĺ
an option.
Description
Off: Do not use the flash.
H
A
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
A
Auto: The flash automatically fires in dark places.
Auto Red-eye: The flash automatically fires and reduces red-eyes.
Fill in: The flash fires whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The flash fires whenever you capture a photo and
reduces red-eyes.
1st Curtain: The flash fires
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
Description
Ball moving direction
Hi-speed: If the shutter speed is faster than the camera's sync
speed (the quickest time taken to open and close the shutter), the
flash will fire multiple times at high speed. The flash starts to fire
while the shutter opens. This option can be set only when you
attach a compatible, optional external flash. (SEF580A)
• The available options may differ depending on shooting conditions.
• There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
• If you select Off, the flash does not fire even when an external flash is
attached. If you adjust the flash intensity manually, the flash will fire once
without a pre-flash.
Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.
Ball moving direction
101
Shooting Functions >
Flash
Reducing the red-eye effect
Using the built-in flash
If the flash fires when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye effect, select Auto
Red-eye, or Fill-in Red.
To open the built-in flash, press the flash pop-up button. The flash does
not fire when the built-in flash is closed.
Without red-eye reduction
With red-eye reduction
If the subject is too far from the camera or moves when the first flash fires, redeyes may not be reduced.
102
Shooting Functions >
Flash
Adjusting the flash intensity
When the flash is on, adjust the flash intensity +/-2 levels.
In Shooting mode, select [m] ĺ b ĺ Flash ĺ an
option ĺ [D] ĺ scroll the command dial or rotate the
navigation button or press [C/F] to adjust the flash
intensity.
To set the flash
intensity,
• You can also drag the slider or touch +/- to adjust the intensity.
• Adjusting the flash intensity may not be effective when:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small
• In some shooting modes, you cannot use this function.
• If you attach an intensity-adjustable external flash to the camera, the intensity
settings of the flash will be applied.
• If the subject is too close when you use the flash, some light may be blocked,
Back
Set
Cancel
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
• When a lens hood is attached, the light from the flash can be blocked by the
hood. Remove the hood to use the flash.
Flash : Fill in
103
Shooting Functions >
Flash
Flash settings
Set the flash mode, exposure value, flash brightness, or multi flash when
you attach an external flash to the camera. You can also set wireless sync
to control internal or external flash. The flash settings are supported only
when you attach a compatible, optional external flash (SEF580A).
Option
Description
• A-TTL: In the A-TTL (Advanced Through The Lens) mode,
Flash Mode
Setting external flash
To set external
flash,
In Shooting mode, press [m] ĺ b ĺ External Flash
Settings ĺ an option.
the camera measures the light reflected by the subject
through the lens. Then, it calculates the optimum
exposure based on the exposure value and shutter
speed.
• Manual Flash: The flash emits the full amount of light or
the flash intensity can be adjusted manually.
• Multi Flash: When you press [Shutter], the flash fires
multiple times based on the number you have set.
Flash EV
Set the exposure of the flash when the flash mode is
A-TTL.
Flash Output
Set the brightness of the flash when the flash mode is
Manual Flash.
Multi Flash
Settings
Set the count, brightness, or frequency of the flash when
the flash mode is Multi Flash.
If data can be exchanged between the camera and the flash, the settings for the
external flash can be adjusted on the camera or the flash. Your previous options
will be applied.
104
Shooting Functions >
Flash
Setting wireless sync for internal or external flash
* Default
Option
Set wireless sync to control internal and external flash units remotely
via wireless signals. The remote system consists of a master flash that is
mounted on the camera and one or more slave flash units. A slave flash is
assigned to one of three groups: A, B, or C.
To set wireless
sync,
Description
Use Wireless
Flash
Set to use wireless sync. (Off*, On)
Channel
Select channels for wireless sync. There are four remote
channels available to allow multiple remote systems to
operate at the same time. Master and slave flash units, in
the same remote system, must be set to the same channel.
(Ch. 1, Ch. 2, Ch. 3, Ch. 4)
Group Flash
Mode
Set the flash mode for group A, B, or C. Changes to the
flash mode must be made on the master flash. The
changes are then applied to slave group A, B, or C, and
the slave groups operate as a remote system of the flash
mode (TTL or manual) according to the settings for the
master flash.
• A-TTL: Set the exposure of the flash when the flash
mode is A-TTL.
• Manual Flash: Set the brightness of the flash when the
flash mode is Manual Flash.
• Off: Do not fire the flash.
In Shooting mode, press [m] ĺ b ĺ Internal Wireless
Flash or External Wireless Flash ĺ an option.
• You cannot select External Flash Settings when you use the External
Wireless Flash function.
• For information about using the wireless sync feature with an external flash,
refer to the optional external flash's (SEF580A) user manual.
105
Shooting Functions
Metering Metering
Shooting Functions >
The metering mode refers to the way in which a camera measures the
quantity of light.
The camera measures the amount of light in a scene, and in many of its
modes, uses the measurement to adjust various settings. For example,
if a subject looks darker than its actual color, the camera captures an
overexposed photo of it. If a subject looks lighter than its actual color, the
camera captures an underexposed photo of it.
Multi
The Multi mode calculates the amount of light in multiple areas. When
light is sufficient or insufficient, the camera adjusts the exposure by
averaging the overall brightness of the scene. This mode is suitable for
general photos.
The brightness and overall mood of the photo can also be affected by how
the camera measures the amount of light. Select an appropriate setting for
a shooting condition.
To set a metering
option,
In Shooting mode, press [N] ĺ an option.
106
Shooting Functions >
Metering
Center-weighted
Spot
The Center-weighted mode calculates a broader area than the Spot mode
does. It sums up the amount of light in the center portion of the shot
(60–80%) and that of the rest of the shot (20–40%). It is recommended
for situations where there is a slight difference in brightness between a
subject and a background or an area of the subject is large compared to
the overall composition of the photo.
The Spot mode calculates the amount of light in the center. When you
capture a photo in conditions where there is a strong backlight behind a
subject, the camera adjusts the exposure so as to shoot a subject correctly.
For example, when you select the Multi mode in a strong backlight
condition, the camera calculates that the overall amount of light is
abundant, which results in a darker photo. The Spot mode can prevent this
situation as it calculates the amount of light in a designated area.
The subject is in bright color while the background is dark. The Spot mode
is recommended for a situation like this where a huge difference in the
exposure exists between a subject and a background.
107
Shooting Functions >
Metering
Measuring the exposure value of the focus area
When this function is turned on, the camera automatically sets an optimal
exposure by calculating the brightness of the focus area. This function
is only available when you select Spot metering or Multi metering, and
Selection AF.
To set this
function,
In Shooting mode, press [m] ĺ b ĺ Link AE to AF
Point ĺ an option.
108
Shooting Functions
Dynamic Range
Dynamic Range
Shooting Functions >
This function automatically corrects the loss of bright detail that can occur
due to shading differences in the photo.
* Default
Icon
Description
Off*: Do not use Dynamic Range.
To set Dynamic Range
options,
In Shooting mode, press [m] ĺ b ĺ
Dynamic Range ĺ an option.
Smart Range+: Correct the loss of bright detail.
You cannot set ISO 100.
HDR: Capture 2 photos with different exposures, and then
combine them to create a single image automatically.
• You cannot set an ISO option higher than ISO 3200.
• Dynamic Range options cannot be set with Picture Wizard
options at the same time.
Without Dynamic Range effect
With Dynamic Range effect
109
Shooting Functions
Smart Filter
Smart Filter
Shooting Functions >
Smart Filter lets you apply special effects to your photos. You can select
various filter options to create special effects that are difficult to be
achieved with normal lenses.
To set Smart Filter
options,
In Shooting mode, press [m] ĺ b ĺ Smart Filter ĺ
an option.
* Default
Option
Description
Off*
No effect
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature.
Colored Pencil
Apply a colored pencil painting effect.
Watercolor
Apply a watercolor painting effect.
Wash drawing
Apply a washed-out effect.
Oil Sketch
Apply an oil sketching effect.
Ink Sketch
Apply an ink sketching effect.
Acryl
Apply an acryl painting effect.
* Default
Option
Description
Negative
Apply a negative film effect.
Red
Desaturate all colors but red.
Green
Desaturate all colors but green.
Blue
Desaturate all colors but blue.
Yellow
Desaturate all colors but yellow.
Smart Filter options cannot be set with Picture Wizard options at the same time.
110
Shooting Functions
Exposure Exposure
compensation
compensation
Shooting Functions >
The camera automatically sets the exposure by measuring the levels of
light from the photo’s composition and the position of a subject. If the
exposure set by the camera is higher or lower than you expected, you can
adjust the exposure value manually. The exposure value is adjustable in ±3
increments. The camera displays the exposure warning in red for each step
beyond ±3 range.
To adjust the exposure value, while holding down [W], scroll the
command dial. You can also adjust the exposure value by pressing [f],
and then selecting EV.
You can check the exposure value by the position of the exposure level
indicator.
Exposure warning
Standard exposure index
Exposure level
indicator
Decreased exposure
(darker)
+2
-2
Original
Viewing the overexposure guide
View overexposed areas on a photo in Shooting mode before capturing a
photo. Setting this feature will allow the overexposed areas of a photo to
blink.
To view the
overexposure
guide,
In Shooting mode, press [m] ĺ b ĺ Overexposure
Guide ĺ an option.
Increased exposure
(brighter)
111
Shooting Functions
Exposure/Focus
lock lock
Exposure/Focus
Shooting Functions >
When you cannot achieve an appropriate exposure because of a strong
color contrast or you want to capture a photo on which the subject is
out of the auto focus area, lock the focus or exposure and then capture a
photo.
After locking the exposure or focus, aim the lens where you desire, and
then press [Shutter].
To lock the exposure or focus, adjust the photo’s composition on which
you want to focus or calculate the exposure, and then press [a].
You can change the function assigned to the button to focus lock, exposure
lock, or both of them. A function executed by half-pressing [Shutter] varies
according to the function assigned to [a]. (p. 166)
112
Shooting Functions
Exposure/Focus
separation
Exposure/Focus
separation
Shooting Functions >
Separate the exposure area and the focus area or merge them again. This
feature is available only when Touch AF is set to Touch AF.
1
2
or
• The focus area and the exposure area will be separated.
On the screen, touch an area or touch and release your finger
to focus on it.
• The exposure separation icon
Touch an area to measure the exposure after touching
drag to the exposure area.
• Touch and hold each area to lock the focus or exposure setting.
• Drag the areas together to merge the focus area and the exposure
will appear at the top right of the
area.
focus frame.
Exposure
Focus
3
Press [Shutter] to capture the photo.
• The focus area and the exposure area will return to their pre-
shooting position.
If you press [a] while its function is set to AEL Hold, the exposure will
remain locked and the exposure area will not change after shooting.
113
Shooting Functions
Video functions
Video functions
Shooting Functions >
The functions available for video are explained below.
Movie quality
Set the Movie quality.
Movie size
To set movie
quality options,
Set the movie size.
To set movie size
options,
In Shooting mode, press [m] ĺ g ĺ Movie Size ĺ
an option.
* Default
Icon
*
Size
Recommended for
1920X1080 (60 fps) (16:9)
View on a Full HDTV. (Videos
recorded with this option may
not play on some HDTVs or smart
phones that do not support 60 fps.)
1920X1080 (30 fps) (16:9)
View on a Full HDTV.
1920X1080 (15 fps) (16:9)
View on a Full HDTV. (Available only
with some Smart Filter options.)
1920X810 (24 fps)
(Approx. 2.35:1)
View on a Full HDTV.
1280X720 (60 fps) (16:9)
View on an HDTV.
1280X720 (30 fps) (16:9)
View on an HDTV.
640X480 (30 fps) (4:3)
View on a TV.
320X240 (30 fps) (4:3)
Post on a website using the wireless
network (30 seconds maximum).
In Shooting mode, press [m] ĺ g ĺ Movie Quality ĺ
an option.
* Default
Icon
Extension
Description
MP4 (H.264)
Normal: Record videos in normal quality.
MP4 (H.264)
HQ*: Record videos in high quality.
114
Shooting Functions >
Video functions
Multi Motion
DIS (Anti-Shake)
Set the playing speed of a video.
Set the Digital Image Stabilization function.
To set playing
speed options,
In Shooting mode, press [m] ĺg ĺMulti Motion ĺ
an option.
To set the DIS
function,
In Shooting mode, press [m] ĺg ĺ
DIS (Anti-Shake) ĺan option.
* Default
Icon
* Default
Description
Option
Description
x0.25: Record a video to view it at 1/4 normal speed during
playback. (Available only with 640x480 or 320x240)
Off*
Do not use the DIS function.
On
Use the DIS function.
x0.5: Record a video to view it at 1/2 normal speed during
playback. (Available only with 1920x1080 (30 fps), 1280x720 (30
fps), 640x480, or 320x240)
x1*: Record a video to view it at normal speed during playback.
• If you record a video with the DIS function, the video will be recorded at a
narrower angle than the lens' angle.
• The DIS function is not supported when you attach a fish-eye lens.
x5: Record a video to view it at 5X normal speed during playback.
x10: Record a video to view it at 10X normal speed during
playback.
x20: Record a video to view it at 20X normal speed during
playback.
• If you select an option other than x1, the sound recording function and the
Distortion Correct function will not be supported.
• The available options may differ depending on shooting conditions.
115
Shooting Functions >
Video functions
Fader
Voice
You can fade in or fade out a scene using the fader function on the camera
without having to do it on a PC. Set the fade in option to gradually fade in
at the start of the scene. Set the fade out option to gradually fade out the
scene. Use the function appropriately and add dramatic effects on your
videos.
Sometimes, a muted video is more appealing than the one with sound.
Turn the voice off to record a muted video.
To set fader
options,
In Shooting mode, press [m] ĺ g ĺ Voice ĺ
an option.
In Shooting mode, press [m] ĺ g ĺFader ĺ
an option.
* Default
Icon
To set voice
options,
Description
Off*: Fader function not used.
In: Scene gradually fades in.
Out: Scene gradually fades out.
In-Out: The fader function is applied at the start and end of the
scene.
Wind Cut
When you record videos in noisy environments, unintended sounds can
be recorded in videos. In particular, severe wind noise recorded in videos
distracts you from enjoying your videos. Use the Wind Cut function to
remove some surrounding noise in addition to wind noise.
To reduce wind
sound,
In Shooting mode, press [m] ĺ g ĺ Wind Cut ĺ
an option.
When you use the fader function, it may take longer to save a file.
116
Shooting Functions >
Video functions
Mic Level
Set the mic level for the shooting conditions.
To set the mic
level,
In Shooting mode, press [m] ĺ g ĺ Mic Level ĺ
an option.
* Default
Icon
Description
A
Auto*: Set the mic level automatically.
M
Manual: Set the mic level manually.
117
Chapter 3
Playback/Editing
Learn about how to play back and edit photos and videos.
Refer to chapter 6 for editing files on a PC.
Playback/Editing
Searching and managing files
Learn how to view photo and video thumbnails and how to protect or
delete files.
If you perform no operations for a while, information and icons on the screen
disappear. When you operate the camera again, they will reappear.
Viewing image thumbnails
In order to search for photos and videos you want, convert to the
thumbnail view. The thumbnail view displays multiple images at a time
so that you can easily look through items you wish to find. You can also
classify and display files by category, such as date or file type.
All
Viewing photos
1
Press [y].
• The most recent file you captured will be displayed.
Scroll the command dial to the left to select the thumbnail
view mode.
(Scroll the command dial to the right to return to the previous
mode.)
2
Rotate the navigation button or press [C/F] to scroll
through files.
• You can also drag the image left or right to move to another file.
You may not be able to edit or play back files that were captured with other
cameras, due to unsupported sizes or codecs. Use a computer or another device
to edit or play back these files.
119
Playback/Editing >
Searching and managing files
Viewing files by category
1
In the thumbnail view, press [m] ĺ z ĺ Filter ĺ
a category.
• You can also touch the current category name to open the option
list.
* Default
Option
Description
All*
View files normally.
Date
View files by the date they were saved.
Type
View files by the file type.
2
Select a list to open it.
3
Select a file to view it.
4
Touch
to return to the previous view.
120
Playback/Editing >
Searching and managing files
Viewing files as a folder
Continuous and burst shots appear as a folder. Selecting a folder will play
back all photos automatically. Deleting a folder will delete all photos in the
folder.
1
In Playback mode, rotate the navigation button or press
[C/F] to move to a desired folder.
3
Rotate the navigation button or press [C/F] to move to
another file.
• You can also drag the image left or right to move to another file.
4
Scroll the command dial to the left or press [o] to return to
Playback mode.
• You can also touch
to return to Playback mode.
• You can also drag the image left or right to move to a desired folder.
• The camera will automatically play back photos in the folder.
2
Scroll the command dial to the right to open the folder.
• You can also touch the folder on the screen or press [o] to open the
folder.
121
Playback/Editing >
Searching and managing files
Lock/Unlock all files
Protecting files
Lock or unlock all files.
Protect your files from accidental deletion.
1
In Playback mode, press [m] ĺ z ĺ Protect ĺ
Multiple Protect.
1
In Playback mode, press [m] ĺ z ĺ Protect ĺ
Protect All.
2
Rotate the navigation button or press [C/F] to select a
file, and then press [o].
2
Select an option.
3
Press [f].
• You cannot delete or rotate a protected file.
• You can directly protect a file in Playback mode by selecting a file, and then
pressing [
]. To unprotect the file, press [
Option
Description
Lock
Lock all files.
Unlock
Unlock all files.
Cancel
Return to the previous menu.
] again.
• For photos that are saved as a folder, press [ ] while the folder is selected to
protect all files.
122
Playback/Editing >
Searching and managing files
Deleting files
3
Press [n].
Delete files in Playback mode and secure more space on your memory
card. Protected files are not deleted.
4
When the pop-up message appears, select Yes.
Deleting all files
Deleting a single file
You can select a single file and delete it.
1
In Playback mode, select a file, and then press [n].
2
When the pop-up message appears, select Yes.
You can delete all files on the memory card at once.
1
In Playback mode, press [m].
2
Select z ĺ Delete ĺ Delete All.
3
When the pop-up message appears, select Yes.
Deleting multiple files
You can select multiple files and delete them.
1
In Playback mode, press [m] ĺ z ĺ Delete ĺ Multiple
Delete.
• You can also press [m] ĺ z ĺ Select Item.
• Alternatively, in thumbnails view, press [n], and then select files to
delete.
2
Select files you want to delete by rotating the navigation
button or pressing [C/F], and then press [o].
• Press [o] again to cancel your selection.
123
Playback/Editing
Viewing photos
Enlarging a photo
Viewing a slide show
You can enlarge photos when viewing them in Playback mode. You can
also use the Trim function to extract the portion of the image displayed on
the screen and save it as a new file.
You can view photos in a slide show, apply various effects to the slide
show, and play background music.
Full Image
Crop
Magnification (The maximum
magnification may differ by
resolution.)
Magnified area
Scroll the command dial to the right to enlarge a photo.
(Scroll the command dial to the left to reduce a photo.)
1
In Playback mode, press [m].
2
Select z ĺ Slide Show Options.
3
Select a slide show effect option.
• Skip to step 4 to start a slide show with no effects.
* Default
Option
Description
Play Mode
Set whether or not to repeat the slide show.
(One Play*, Repeat)
Interval
Set the interval between photos. (1 sec*, 3 sec, 5 sec,
10 sec)
To
Do this
Move magnified area
Press [D/I/C/F].
Music
Set background audio.
Crop the enlarged image
Press [f]. (saved as a new file)
Effect
Return to the original image
Press [o].
• Set a scene change effect between photos.
• Select Off to cancel effects.
• You can also pinch your fingers together or spread them apart on the screen
to reduce or enlarge a photo. You can also double-tap an area to enlarge it
quickly.
• You can scroll through files by rotating the navigation button, even when a
photo is enlarged.
124
Playback/Editing >
Viewing photos
4
Press [m].
Viewing interval shots
5
Select Start Slide Show.
View photos that are captured with the Interval Capture function.
6
View the slide show.
To view interval
shots,
In Playback mode, press [m] ĺ z ĺ Play Interval
Shots.
• Press [o] to pause.
• Press [o] again to resume.
• Press [m] to stop the slide show and return to Playback mode.
• Press [D/I] to adjust the volume level.
Auto rotating
With Auto Rotate on, the camera automatically rotates photos you have
captured vertically so they fit the screen horizontally.
Viewing the overexposure guide
Set the overexposed areas of a photo to blink.
To view the
overexposure guide,
To set auto rotate
options,
In Playback mode, press [m] ĺ z ĺ Auto Rotate ĺ
an option.
In Shooting mode, press [m] ĺ z ĺ Overexposure
Guide ĺ an option.
125
Playback/Editing
Playing videos
In Playback mode, you can play a video, capture an image from a video, or
crop a video to save as another file.
Stop
Capture
Scanning backward or forward
To scan backwards or forwards through a video file while it is playing, use
one of the following methods.
• Touch
/ . Each time you touch the icon, you change the scan speed
in this order: 2X, 4X, 8X.
• Press [C/F]. Each time you press the button, you change the scan
speed in this order: 2X, 4X, 8X.
• Scroll the command dial to the left or right. Each time you scroll the
Icon
Description
/
View previous file/Scan backward. (Each time you touch the icon
while playing the video, you change the scan speed in this order:
2X, 4X, 8X.)
/
Pause or resume playback.
/
View next file/Scan forward. (Each time you touch the icon while
playing the video, you change the scan speed in this order: 2X,
4X, 8X.)
command dial, you change the scan speed in this order: 2X, 4X, 8X.
• Drag the handles that appear on the progress bar to the left or right. You
can change the playback position in the video.
Adjust the volume or mute the sound.
126
Playback/Editing >
Playing videos
Adjusting the brightness of a video
Adjusting the volume of a video
Adjust the brightness of a video while playing it.
Adjust the volume of a video while playing it.
To adjust the
brightness of a
video,
Touch the left half of the display ĺ drag upward or downward.
Stop
Capture
To adjust the
volume of a video,
Touch the right half of the display ĺ drag upward or
downward.
Stop
You can also touch
downward.
Capture
and drag the slider on the volume control bar upward or
127
Playback/Editing >
Playing videos
Trimming a video during playback
1
In Playback mode, scroll to a video, and then press [m].
2
Select Trim Movie.
3
Press [o] or touch
to start playing the video.
4
Press [o] or touch
trimming to begin.
at the point where you want the
5
Press [f] or touch Start Point.
6
Press [o] or touch
to resume playing the video.
7
Press [o] or touch
trimming to end.
at the point where you want the
8
Press [f] or touch End Point.
9
Press [f] or touch Trim to trim a video.
• You cannot trim a video recorded in 3D mode.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file and leave the original
video intact.
Capturing an image during playback
1
While viewing a video, press [o] or touch
where you want to capture an image.
2
Press [f] or touch Capture.
at the point
• You cannot capture an image from a video recorded in 3D mode.
• The resolution of the captured image will be the same as the original video.
• The captured image is saved as a new file.
• You can adjust the scene to be cropped by dragging the handles
that appear on the progress bar.
10 When the pop-up message appears, select Yes.
128
Playback/Editing
Editing photos
Perform photo editing tasks, such as resizing, rotating, or reducing red-eye
effects. Edited photos are saved as new files under different file names.
Photos captured in some modes cannot be edited with the Image Edit
function.
To edit images,
In Playback mode, scroll to a photo, and then press [f] ĺ
an option.
• You can also edit images in Playback mode by selecting a photo, and then
pressing [m] ĺ z ĺ Edit Image.
• Some images may not be edited with the Image Edit function. In this case, use
the supplied image editing software.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower
Cropping a photo
1
Touch
2
Drag the sides of the box to adjust the size of the area.
3
Drag the box to move the location of the area.
4
Press [f] or touch Done.
5
Touch
ĺ
.
to save.
resolution. Photos that you rotate or resize manually are not automatically
converted to a lower resolution.
• You cannot edit photos while viewing files as a folder. Open the folder and
select a photo to edit each photo.
129
Playback/Editing >
Editing photos
Rotating a photo
Resizing photos
1
Touch
Change the size of a photo and save it as a new file.
2
Touch an option.
ĺ
.
Cancel
Done
1
Touch
2
Touch an option.
ĺ
.
Cancel
Done
Rotate : Right 90˚
Resize : 10.1M 3:2
3
Press [f] or touch Done.
4
Touch
to save.
• You can also rotate a photo in Playback mode by pressing [m], and then
selecting z ĺ Rotate ĺ a desired option.
• The camera will overwrite the original file.
3
Press [f] or touch Done.
4
Touch
to save.
Available resize options differ depending on the original size of the photo.
130
Playback/Editing >
Editing photos
Adjusting your photos
3
You can correct captured photos by adjusting the brightness, contrast, or
color.
1
Touch
2
Touch an adjusting option.
.
• If you selected
Icon
Scroll the command dial or rotate the navigation button or
press [C/F] to adjust the option.
• You can also drag the slider or touch +/- to adjust the option.
4
Press [f] or touch Done.
5
Touch
to save.
(Auto adjustment), skip to step 4.
Description
Original (Reset to the original image.)
Auto adjustment
Brightness
Contrast
Saturation
RGB adjustment
Color Temperature
Exposure
Hue
131
Playback/Editing >
Editing photos
Retouching faces
Reducing red-eye
1
Touch
1
Touch
2
Scroll the command dial or rotate the navigation button or
press [C/F] to adjust the option.
2
Press [f] or touch Done.
ĺ
.
ĺ
.
• To cancel correction, touch
.
• You can also drag the slider or touch +/- to adjust the option.
• As the number increases, the skin tone becomes brighter and
3
Touch
to save.
smoother.
3
Press [f] or touch Done.
• To cancel correction, touch
4
Touch
.
to save.
132
Playback/Editing >
Editing photos
Applying Smart Filter effects
Apply special effects to your photos.
1
Touch
, and then touch an option.
Cancel
Done
Smart Filter : Vignetting
Option
Description
Original
No effect
Vignetting
Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Miniature
Apply a tilt-shift effect to make the subject
appear in miniature.
Colored Pencil
Apply a colored pencil painting effect.
Watercolor
Apply a watercolor painting effect.
Wash drawing
Apply a washed-out effect.
Option
Description
Oil Painting
Apply an oil painting effect.
Ink Painting
Apply an ink painting effect.
Acryl
Apply an acryl painting effect.
Negative
Apply a negative film effect.
Red
Desaturate all colors but red.
Green
Desaturate all colors but green.
Blue
Desaturate all colors but blue.
Yellow
Desaturate all colors but yellow.
2
Press [f] or touch Done.
3
Touch
to save.
133
Chapter 4
Wireless network
Learn how to connect to wireless local area networks (WLANs) and use functions.
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Connecting to a WLAN
Signal strength
Press [F] or touch
to open network setting options.
1
Rotate the mode dial to B.
2
Select
3
Follow the on-screen instructions until the Wi-Fi Setting screen
appears.
• When a login page appears, refer to "Using the login browser".
• In some modes, press [f], and then select Wi-Fi Setting.
• When you select an unsecured AP, the camera will connect to the
,
,
,
, or
.
• The camera automatically searches for available AP devices.
• When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 139)
(p. 137)
WLAN.
• If you select a WPS profile supported AP, select
4
Select an AP.
Wi-Fi Setting
Refresh
Samsung1
Samsung2
Samsung3
Samsung4
ĺ WPS PIN
connection, and then enter a PIN on the AP device. You can also
connect to a WPS profile supported AP by selecting ĺ WPS
button connection on the camera, and then pushing the WPS
button on the AP device.
• The same AP may be listed twice, with different frequencies,
because your camera supports the dual band function.
• If a pop-up message about data collection regulations appears,
read and agree to it.
• Select Refresh to refresh the list of connectable APs.
• Select Add wireless network to add an AP manually. The AP name
must be in English to add the AP manually.
135
Wireless network >
Connecting to a WLAN and configuring network settings
Setting network options
Manually setting the IP address
1
In the Wi-Fi Setting screen, move to an AP, and then press
[F] or touch .
1
In the Wi-Fi Setting screen, move to an AP, and then press
[F] or touch .
2
Select each option, and then enter the required information.
2
Select IP Setting ĺ Manual.
3
Select each option, and then enter the required information.
Option
Description
Network Password
Enter the network password.
IP Setting
Set the IP address automatically or manually.
Option
Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server
Enter the DNS address.
136
Wireless network >
Connecting to a WLAN and configuring network settings
Using the login browser
• You may not be able to select some items depending on the page you
You can enter your login information via the login browser when
connecting to some APs, sharing services, or cloud servers.
• The login browser may not close automatically after you log into some pages.
Icon
Description
Close the login browser.
connected to. This does not indicate a malfunction.
If this occurs, close the login browser by touching
, and then proceed
with the desired operation.
• It may take longer to load the login page due to the page size or network
speed. If this occurs, wait until the login information input window appears.
Move to the previous page.
Move to the next page.
Stop loading the page.
Reload the page.
137
Wireless network >
Connecting to a WLAN and configuring network settings
Network connection tips
• You must insert a memory card to use the Wi-Fi features.
• The quality of the network connection will be determined by the AP.
• The further the distance between your camera and the AP, the longer it
will take to connect to the network.
• If a nearby device is using the same radio frequency signal as your
camera, it may interrupt your connection.
• If your AP name is not in English, the camera may not be able to locate
the device or the name may appear incorrectly.
• For network settings or a password, contact your network administrator
or network service provider.
• If a WLAN requires authentication from the service provider, you may not
be able to connect to it. To connect to the WLAN, contact your network
service provider.
• Depending on the encryption type, the number of digits in the password
may differ.
• A WLAN connection may not be possible in all surroundings.
• The camera may display a WLAN enabled printer on the AP List. You
cannot connect to a network via a printer.
• You cannot connect your camera to a network and a TV simultaneously.
• If you cannot connect to a WLAN, try another AP from the available AP
list.
• A login page may appear when you select free WLANs provided by some
network service providers. Enter your ID and password to connect to
the WLAN. For information about registering or the service, contact the
network service providers.
• Be cautious when you enter personal information for an AP connection.
Do not enter any payment or credit card information on your camera.
The manufacturer is not liable for any problem caused by entering such
information.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio transmission
laws in your region. To ensure compliance, use the WLAN feature only in
the country where you purchased the camera.
• The process for adjusting network settings may differ, depending on
network conditions.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully charged.
• You cannot upload or send files captured in some modes.
• Files that you transfer to another device may not be supported by the
device. In this case, use a computer to play back the files.
• Connecting to a network may incur additional charges. Costs will vary
based on the conditions of your contract.
138
Wireless network >
Connecting to a WLAN and configuring network settings
Entering text
Learn how to enter text. The icons in the table let you move the cursor,
change the case, etc. Touch a key to enter it.
Icon
Description
Move the cursor.
Stop entering text and return to the previous page.
Change case.
Switch between Symbol/Number mode and the normal mode.
Change the input language.
Enter a space.
Save the displayed text.
Delete the last letter.
• You can use only the English alphabets in some modes, regardless of the
display language.
• The number of characters you can enter varies depending on the situation.
• The screen may differ depending on the input mode.
• Touch and hold a key to enter the character at the upper right corner of the
key.
139
Wireless network
Using the NFC Feature (Tag & Go)
Place a smart phone's NFC antenna near the camera’s NFC tag to launch
the feature for saving photos to a smart phone automatically or the feature
for using a smart phone as a remote shutter. You can also transfer files to
an NFC-enabled device in Playback mode.
• This feature is supported by NFC-enabled smart phones running Android OS.
•
•
•
•
It is recommended that you use the latest version. This feature is not available
for iOS devices.
You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps or the Google Play Store. Samsung SMART CAMERA App is compatible
with Samsung camera models manufactured in 2013 or later.
To read an NFC tag, place the NFC-enabled device near the camera’s NFC tag
for more than 2 seconds.
You can set the size for transferred photos by pressing [m], and then
selecting d ĺ MobileLink/NFC Image Size ĺ an option.
Do not modify the NFC tag in any way.
Using NFC features in Playback mode (Photo
Beam)
In Playback mode, the camera transfers the current file to the smart phone
automatically when you read a tag from an NFC-enabled device.
• To transfer multiple files, select files from the thumbnail view, and then
read a tag from an NFC-enabled device.
Using NFC features in Wi-Fi mode
Select MobileLink or Remote Viewfinder from the pop-up window that
appears by reading a tag from an NFC-enabled device. (p. 143, 145)
Using NFC features in Shooting mode
Launch AutoShare or Remote Viewfinder by reading a tag from an NFCenabled device. (p. 141, 145) Preset to launch the Wi-Fi function by reading
a tag on an NFC-enabled device. (p. 167)
140
Wireless network
Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare
feature via a WLAN. When you capture a photo with your camera, the
photo is saved to a smart phone automatically.
1
In Shooting mode, touch
.
• You can also press [m] ĺ b ĺ AutoShare ĺ On.
• If the pop-up message that prompts you to download the
application appears, select Next.
• The AutoShare feature is supported by smart phones or tablets running
Android OS or iOS. (Some features may not be supported by some models.)
Before using this feature, update the device’s firmware to the latest version.
If the firmware version is not the most recent, this function may not perform
properly.
• You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps, the Google Play Store, or the Apple App Store. Samsung SMART
CAMERA App is compatible with Samsung camera models manufactured in
2013 or later.
• If you set this function, the setting is maintained even when you change the
Shooting mode.
• This feature may not be supported in some modes or may not be available
with some shooting options.
2
On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
• To start the application automatically on an NFC-enabled smart
phone, turn on the function and place the smart phone near
the NFC tag (p. 32) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 5.
3
Select the camera from the list and connect the smart phone
to the camera.
• The smart phone can connect to only one camera at a time.
141
Wireless network >
4
Saving files to a smart phone automatically
On the camera, allow the smart phone to connect to your
camera.
• If the smart phone has been connected to your camera before, it is
connected automatically.
• An icon that shows the connection status (
) will appear on the
camera’s screen.
5
Capture a photo.
• The captured photo is saved to the camera, and then transferred to
the smart phone. If a memory card is not inserted or the memory is
full, the captured photo is transferred to the smart phone without
being saved to the camera.
• If you recorded a video, it is saved only to the camera.
• The image file captured while recording a video is not saved on the
smart phone.
• If the GPS feature is activated on the smart phone, the GPS
information will be saved with the captured photo.
142
Wireless network
Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink
feature via a WLAN. You can easily send photos or videos to your smart
phone.
1
On the camera, rotate the mode dial to B.
2
On the camera, select
• If the pop-up message that prompts you to download the
• The MobileLink feature is supported by smart phones or tablets running
•
•
•
•
•
•
•
Android OS or iOS. (Some features may not be supported by some models.)
Before using this feature, update the device’s firmware to the latest version.
If the firmware version is not the most recent, this function may not perform
properly.
You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps, the Google Play Store, or the Apple App Store. Samsung SMART
CAMERA App is compatible with Samsung camera models manufactured in
2013 or later.
When there are no files in the camera memory, you cannot use this feature.
If you select files from the smart phone, you can view up to 1,000 recent files
and send up to 1,000 files at a time. If you select files from the camera, you
can view files that were selected from the camera. The maximum number of
files you can send varies depending on the storage space of the smart phone.
When you send Full HD videos using MobileLink feature, you may not be able
to play back files on some devices.
When using this feature on an iOS device, the device may lose its Wi-Fi
connection.
You cannot send RAW files.
You can set the size for transferred photos by pressing [m], and then
selecting d ĺ MobileLink/NFC Image Size ĺ an option.
.
application appears, select Next.
3
On the camera, select a sending option.
• If you select Select Files from Smartphone, you can use your
smart phone to view and share files stored on the camera. The
screen turns off if you perform no operations on the smart phone
for 30 seconds.
• If you select Select Files from Camera (Connect to one
smartphone), you can select files to send from the camera.
• If you select Select Files from Camera (Connect to multiple
smartphones), you can connect to up to 4 smart phones, and then
select files to send from the camera. Transferring files to multiple
smart phones may take longer than transferring files to one device.
143
Wireless network >
4
Sending photos or videos to a smart phone
7
To connect to multiple smart phones, repeat steps 4, 5 and 6,
and then touch Next.
• To start the application automatically on an NFC-enabled smart
8
phone, turn on the function and place the smart phone near
the NFC tag (p. 32) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 7.
On the smart phone or camera, select files to transfer from the
camera.
9
On the smart phone, touch the copy button or on the camera,
select Send.
On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
5
Select the camera from the list and connect the smart phone
to the camera.
• The smart phone can connect to only one camera at a time.
6
• The camera will send the files to the smart phone.
• When you connect to multiple smart phones, the camera will send
the files to all devices at the same time.
On the camera, allow the smart phone to connect to your
camera.
• If the smart phone has been connected to your camera before, it is
connected automatically.
• If you select Select Files from Camera (Connect to multiple
smartphones), touch
camera.
next to the smart phone listed on the
144
Wireless network
Using a smart phone as a remote shutter release
The camera connects to a smart phone that supports the Remote
Viewfinder feature via a WLAN. Use the smart phone as a remote shutter
release with the Remote Viewfinder feature. The captured photo will
display on the smart phone.
1
On the camera, rotate the mode dial to B.
2
On the camera, select
• If the pop-up message that prompts you to download the
application appears, select Next.
• The Remote Viewfinder feature is supported by smart phones or tablets
running Android OS or iOS. (Some features may not be supported by some
models.) Before using this feature, update the device’s firmware to the latest
version. If the firmware version is not the most recent, this function may not
perform properly.
• You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps, the Google Play Store, or the Apple App Store. Samsung SMART
CAMERA App is compatible with Samsung camera models manufactured in
2013 or later.
• This function is not available when you attach a 3D lens in 3D mode.
.
3
On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
• To start the application automatically on an NFC-enabled smart
phone, turn on the function and place the smart phone near
the NFC tag (p. 32) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 6.
4
Select the camera from the list and connect the smart phone
to the camera.
• The smart phone can connect to only one camera at a time.
145
Wireless network >
5
Using a smart phone as a remote shutter release
On the camera, allow the smart phone to connect to your
camera.
• If the smart phone has been connected to your camera before, it is
connected automatically.
6
On the smart phone, select q to open the smart panel.
7
On the smart phone, set the shooting options.
• While using this feature, some buttons are not available on your
camera.
• The zoom button and the shutter button on your smart phone will
not function when using this feature.
• Some shooting options are not supported.
• Shooting options that you have set will remain on the camera after
the connection with the smart phone has ended.
8
Touch
to return to the shooting screen.
9
On the smart phone, touch and hold
release it to capture the photo.
• Touch
to record a video and touch
to focus, and then
to stop a video.
• If the GPS feature is activated on the smart phone, the GPS
information will be saved with the captured photo.
• The focus is automatically set to Multi AF.
• When you use this feature, the ideal distance between the camera and the
smart phone may vary, depending on your surroundings.
• The smart phone must be within 7 m of the camera to use this feature.
• It will take some time to capture the photo after you release
on the smart
phone.
• If the file save option is set to Smartphone + Camera, only photos will be
transferred to the smart phone. (Videos and RAW files will not be transferred.)
• The Remote Viewfinder function will deactivate when:
- there is an incoming call on the smart phone
- either the camera or the smart phone turns off
- device loses its connection to the WLAN
- the Wi-Fi connection is poor or unstable
- you perform no operations for approximately 3 minutes while connected
- folder and file number are max values
146
Wireless network
Using the Baby Monitor
Use the Baby Monitor feature to connect the camera to a smart phone on
which the Samsung Home Monitor is installed, and monitor a location.
3
• Place the camera in a safe location where children or pets cannot
• The Baby Monitor feature is supported by smart phones that support WVGA
(800X480) or higher resolution and run the Android OS or iOS. (Some features
may not be supported by some models.) Before using this feature, update the
device’s firmware to the latest version. If the firmware version is not the most
recent, this function may not perform properly.
• You should install the Samsung Home Monitor application on your smart
phone before using this feature. You can download the application from
Samsung Apps, the Google Play Store, or the Apple App Store.
• Use this feature indoors only.
On the camera, select an AP from the list, and then position
the camera.
reach it.
• Point the camera lens at the subject.
• We recommend you connect the camera to a power outlet with the
AC adapter.
4
On the smart phone, select the AP that the camera is
connected to.
• For iOS devices, turn on the Wi-Fi feature before turning on the
1
On the camera, rotate the mode dial to B.
2
On the camera, select
.
• If the pop-up message that prompts you to download the
application.
5
On the smart phone, turn on the Samsung Home Monitor
application.
application appears, select Next.
147
Wireless network >
6
Using the Baby Monitor
Start live video or sound monitoring.
• Watch live video from the camera on your smart phone. During
video monitoring, touch the Sound Monitoring Mode button on
the smart phone to stop the video stream. If the camera detects
noise, an alarm will notify you on the smart phone.
• During live video monitoring via the smart phone, video is not saved on
the camera.
• If the monitored location is dark, touch to turn on the AF-assist light.
• During sound monitoring, alarms will sound on the smart phone if the
camera detects noise for a short period at a volume that is higher than
the designated level.
• During live video monitoring, alarms will not sound on the smart phone
even if the camera detects noise.
7
Touch
to exit the Samsung Home Monitor application.
Adjusting the noise level for alarm
activation
You can set the level of noise that will activate an alarm while using sound
monitoring. Press [D/I] to adjust the noise level.
Noise level for alarm
activation:
When the camera
detects noise that
exceeds the designated
level for a short period,
an alarm will sound.
Exit
Wi-Fi Setting
Do not use this feature for illegal purposes.
148
Wireless network
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC
wirelessly.
Installing the program for Auto Backup on
your PC
1
Sending photos or videos to a PC
1
Rotate the mode dial to B.
2
Select
.
• If the the pop-up message that prompts you to download the
application appears, select Yes.
• The camera will automatically attempt to connect to a WLAN via
Install i-Launcher on the PC. (p. 179)
the most recently connected AP device.
2
Connect the camera to the PC with the USB cable.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 135)
3
When the Auto Backup program icon appears, click it.
• The Auto Backup program is installed on the PC. Follow the on-
3
Select a backup PC.
screen instructions to complete the installation.
4
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
149
Wireless network >
4
Using Auto Backup to send photos or videos
Select OK.
• To cancel sending, select Cancel.
• You cannot select individual files to backup. This function backs up
only new files on the camera.
• The backup's progress will be shown on the PC monitor.
• When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel to return
to the previous screen and prevent the camera from turning off
automatically.
• To turn off your PC automatically after the transfer is complete,
select Shut down PC after backup.
• To change the backup PC, select Change PC.
• When you connect the camera to the WLAN, select the AP that is connected
to the PC.
• The camera will search for available access points even if you are connecting
to the same access point again.
• If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
• While you are using this feature, the shutter control is disabled on your
camera.
You can connect only one camera to the PC at a time for sending files.
The backup may be canceled due to network conditions.
When there are no files in the camera memory, you cannot use this feature.
You must turn off Windows Firewall and any other firewalls before using this
feature.
• You can send up to 1,000 recent files.
• On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.
• When multiple file types are created at once, only the image files (JPG) will be
sent to the PC with this feature.
•
•
•
•
150
Wireless network
Sending photos or videos via email
You can change settings in the email menu and send photos or videos
stored on the camera via email.
5
Select the Name box, enter your name, and then touch .
Sender Setting
Name
Changing email settings
Email
In the email menu, you can change settings for storing your information.
You can also set or change the email password. For information about
entering text, refer to "Entering text". (p. 139)
Storing your information
1
Rotate the mode dial to B.
2
Select
.
Save
Reset
6
Select the Email box, enter your email address, and then
touch .
7
Select Save to save your changes.
• To delete your information, select Reset.
• The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 135)
3
Press [f].
4
Select Sender Setting.
151
Wireless network >
Sending photos or videos via email
Setting an email password
6
Enter a 4-digit password.
1
Rotate the mode dial to B.
7
Enter the password again.
2
Select
8
When the pop-up appears, select OK.
.
• The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 135)
3
Press [f].
4
Select Setting Password ĺ On.
If you lost your password, you can reset it by selecting Reset on the password
setting screen. When you reset the information, the previously saved user’s
setting information and email address will be deleted.
• To deactivate the password, select Off.
5
When the pop-up appears, select OK.
152
Wireless network >
Sending photos or videos via email
Changing the email password
1
Rotate the mode dial to B.
2
Select
.
• The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 135)
3
Press [f].
4
Select Change Password.
5
Enter your current 4-digit password.
6
Enter a new 4-digit password.
7
Enter the new password again.
8
When the pop-up appears, select OK.
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For
information about entering text, refer to "Entering text". (p. 139)
1
Rotate the mode dial to B.
2
Select
3
Connect to a WLAN. (p. 135)
4
Select the Sender box, enter your email address, and then
touch .
.
• If you have previously saved your information, it will be inserted
automatically. (p. 151)
• To use an address from the list of previous senders, select
ĺ
an address.
153
Wireless network >
5
Sending photos or videos via email
Select the Receiver box, enter an email address, and then
touch .
• To use an address from the list of previous recipients, select
• Even if a photo appears to have transferred successfully, errors with the
ĺ
an address.
• Select
to add additional recipients. You can input up to
30 recipients.
• Select
to delete an address from the list.
6
Select Next.
7
Select files to send.
•
•
•
•
•
recipient’s email account may cause the photo to be rejected or recognized
as spam.
You may not be able to send an email if no network connection is available or
if your email account settings are incorrect.
You cannot send an email if the combined file sizes exceed the 7 MB. The
maximum resolution of photos you can send is 2M. The maximum resolution
of videos you can send is . If the selected photo has a resolution higher
than 2M, it will be automatically resized to a lower resolution.
If you cannot send an email because of firewall or user authentication
settings, contact your network administrator or network service provider.
When there are no files in the camera memory, you cannot use this feature.
You can also send an email in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) ĺ Email or by selecting
ĺ Email.
• You can select up to 20 files. The total size must be 7 MB or less.
8
Select Next.
9
Select the comment box, enter your comments, and then
touch .
10 Select Send.
• The camera will send the email.
• If an email fails to send, a message prompting you to send it again
appears.
154
Wireless network
Using photo or video sharing services
Upload your photos or videos to file sharing services. Available sharing
services will be displayed on your camera. To upload files to some sharing
services, you must visit the website and register before connecting your
camera.
5
Enter your ID and password to log in.
• For information about entering text, refer to "Entering text".
(p. 139)
• If you connected to some sharing services, refer to "Using the login
browser". (p. 137)
Accessing a sharing service
1
Rotate the mode dial to B.
2
Select
3
Connect to a WLAN. (p. 135)
4
Select a sharing service.
.
• To select an ID from the list, select
ĺ an ID.
• If you have previously logged in to the sharing service, you may be
logged in automatically.
You must have an existing account on the file sharing service to use this feature.
• If the pop-up message that prompts you to create an account
appears, select OK.
155
Wireless network >
Using photo or video sharing services
Uploading photos or videos
• You can set an upload folder for Facebook by pressing [f], and then
1
Access the sharing service with your camera.
• You cannot upload files if the file size exceeds the limit. The maximum
2
Select files to upload.
3
selecting Upload Folder (Facebook) on the sharing service's list screen.
• You can select up to 20 files. The total size must be 10 MB or less.
•
(On some sharing services, the total size or number of files may
vary.)
•
Select Upload.
• The camera will upload photos or videos.
• When an upload fails, a message prompting you to upload it again
appears.
• On some sharing services, you can enter your comments by
selecting the comment box. For information about entering text,
refer to "Entering text". (p. 139)
•
•
•
•
•
•
resolution of photos you can upload is 2M. The maximum resolution of videos
you can upload is . If the selected photo has a resolution higher than 2M, it
will be automatically resized to a lower resolution. (On some sharing services,
the maximum photo resolution may vary.)
The method of uploading photos or videos may differ depending on the
selected sharing service.
If you cannot access a sharing service because of firewall or user
authentication settings, contact your network administrator or network
service provider.
Uploaded photos or videos may be automatically titled with the date they
were captured.
The speed of your internet connection may affect how quickly photos upload
or web pages open.
When there are no files in the camera memory, you cannot use this feature.
You can also upload photos or videos to file sharing services in Playback
mode by pressing [m], and then selecting Share(Wi-Fi) ĺ a sharing
service or by selecting
ĺ a sharing service.
You cannot upload videos to some sharing services.
When you upload photos to a file sharing service, the photo may be resized
to 2M or 1M depending on their policy.
156
Wireless network
Using Samsung Link to send files
You can upload files from your camera to the Samsung Link online storage
or to registered devices, or view files on a Samsung Link device connected
to the same AP.
3
Enter your ID and password, and then select Login ĺ OK.
• For information about entering text, refer to "Entering text". (p. 139)
• To select an ID from the list, select
ĺ an ID.
• If you have previously logged in to the website, you may be logged
in automatically.
Uploading photos to an online storage or
registered devices
1
Rotate the mode dial to B.
2
Select
ĺWeb storage.
• If the guide message appears, select OK.
To use this feature, you must create a Samsung Link account and an
account with an affiliated online storage service using your PC. After you
have finished creating the accounts, add your online storage account to
Samsung Link.
4
• To refresh the list of online storage or registered devices, touch
• The camera will automatically attempt to connect to a WLAN via
.
• Devices that are not currently connected to the network will not
the most recently connected AP device.
appear on the list.
• If the camera has not previously been connected to a WLAN, it will
• Before you use this feature, you must visit the Samsung Link
search for available AP devices. (p. 135)
website with your PC and register an online storage or device.
• To change the size for uploaded photos, press [f], and then select
Upload Image Size.
Select an online storage service or a registered device.
5
Select files to upload, and then select Upload.
•
•
•
•
You cannot upload video files to Samsung Link online storage.
When there are no files in the camera memory, you cannot use this feature.
You can upload up to 20 files.
You can also upload photos in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) ĺ Samsung Link or by selecting
ĺ Samsung
Link.
157
Wireless network >
Using Samsung Link to send files
Viewing photos or videos on devices that
support Samsung Link
1
Rotate the mode dial to B.
2
Select
5
On the Samsung Link device, select a camera to connect to.
6
On the Samsung Link device, browse the shared photos or
videos.
• For information about searching for the camera and browsing the
ĺNearby devices.
• The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 135)
photos or videos on the Samsung Link device, refer to the device's
user manual.
• Videos may not play smoothly depending on the type of Samsung
Link device or the network condition. For smooth playback, use a
5 GHz dual-band AP device.
• You can set to allow only selected devices or all devices to connect
by pressing [f], and then selecting DLNA Access Control on the
screen.
• A sharing file list is created. Wait until other devices can find your
camera.
3
Connect the Samsung Link device to a network, and then turn
on the Samsung Link feature.
• Refer to your device's user manual for more information.
4
On the camera, allow the Samsung Link device to connect to
your camera.
AP
S The camera is connected to a TV that supports Samsung Link via WLAN.
158
Wireless network >
Using Samsung Link to send files
• You can share up to 1,000 recent files.
• On a Samsung Link device, you can view only photos or videos captured with
•
•
•
•
•
•
•
•
•
•
your camera.
The range of the wireless connection between your camera and a Samsung
Link device may vary depending on the specifications of the AP.
If the camera is connected to 2 Samsung Link devices, playback may be
slower.
Photos or videos will be shared in their original sizes.
You can use this feature only with devices that support Samsung Link.
Shared photos or videos will not be stored on the Samsung Link device, but
they can be stored in the camera to meet the device's specifications.
Transferring photos or videos to the Samsung Link device may take some
time depending on the network connection, the number of files to be shared,
or the sizes of the files.
If you power off the camera abnormally while viewing photos or videos on
a Samsung Link device (for example, by removing the battery), the device
considers the camera to still be connected.
The order of photos or videos on the camera may be different than on the
Samsung Link device.
Depending on the number of photos or videos you want to share, it may
take some time to load your photos or videos and complete the initial set-up
process.
While viewing photos or videos on the Samsung Link device, continuously
using the device's remote or performing additional operations on the device
may prevent this feature from working properly.
• If you reorder or sort files on the camera while viewing them on a Samsung
•
•
•
•
•
Link device, you must repeat the initial set-up process to update the list of
files on the device.
When there are no files in the camera memory, you cannot use this feature.
We recommend you use a network cable to connect your Samsung
Link device to your AP. This will minimize any video ‘Stuttering’ you may
experience when streaming content.
To view files on a Samsung Link device using the Nearby devices feature,
enable multicast mode on your AP.
1920X1080 (60 fps) videos can be played only on Full HDTVs capable of
playback at 60 fps.
You can view 3D files only on 3D-compatible TVs or monitors.
159
Chapter 5
Camera settings menu
Learn about the user settings and general settings menu.
You can adjust the settings to better suit your needs and preferences.
Camera settings menu
User settings
You can set the user environment with these settings.
To set user options,
In Shooting mode, press [m] ĺ d ĺ an option.
Auto ISO Range
You can set the maximum ISO value under which each EV step is chosen
when you set the ISO to Auto.
* Default
Available items and the order of them may differ depending on shooting
conditions.
Option
Value
1/3 Step
ISO 125, ISO 160, ISO 200, ISO 250, ISO 320, ISO 400,
ISO 500, ISO 640, ISO 800, ISO 1000, ISO 1250, ISO 1600,
ISO 2000, ISO 2500, ISO 3200*
1 Step
ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200*
Manage Custom Mode
Create your own shooting modes by adjusting options and saving them.
Open saved custom modes or delete them.
Noise Reduction
Use the Noise Reduction to reduce the visual noise in photos.
ISO Customizing
ISO Step
You can set the size for the ISO sensitivity by either 1/3 or 1 step.
* Default
Option
Description
High ISO NR
This function reduces noise that may occur when you
set a high ISO sensitivity. (Off, High, Normal*, Low)
Long Term NR
This function reduces noise when you set the camera
for a long exposure. (Off, On*)
161
Camera settings menu >
User settings
Bracketing Settings
DMF (Direct Manual Focus)
You can set up the options for each bracketing.
You can adjust the focus manually by rotating the focus ring after
achieving the focus by half-pressing [Shutter]. This feature may not be
available with some lenses.
* Default
Option
Description
AE Bracketing
Settings
Set the exposure interval. Use the command dial or
the navigation button to select an option. You can
also drag the slider or touch the arrows. (-/+0.3 EV*,
-/+0.7 EV, -/+1.0 EV, -/+1.3 EV, -/+1.7 EV,
-/+2.0 EV, -/+2.3 EV, -/+2.7 EV, -/+3.0 EV)
WB Bracketing
Settings
Adjust the White Balance interval range of the
3 bracketed photos. Use the command dial or the
navigation button to select an option. You can also
touch the left/right arrows to adjust the Amber/Blue
values or touch the up/down arrows to adjust the
Magenta/Green values. (AB-/+3*, AB-/+2, AB-/+1,
MG-/+3, MG-/+2, MG-/+1)
For example, AB-/+3 adjusts the Amber value plus
or minus three steps. MG-/+3 adjusts the Magenta
value the same amount.
P Wiz Bracket Set
Select 3 Picture Wizard settings the camera uses to
capture the 3 bracketed photos.
Depth Bracket Set
Set the depth interval. Use the command dial or
the navigation button to select an option. You can
also drag the slider or touch the arrows to select
an option. (-/+0.3, -/+0.7, -/+1.0*, -/+1.3, -/+1.7,
-/+2.0, -/+2.3, -/+2.7, -/+3.0)
DMF Responsiveness
Set the focus ring response when you use the DMF function. If you select
High, slight rotations of the focus ring are made to adjust the focus. If you
select Low, longer rotations of the focus ring focus are made to adjust the
focus. This feature is supported only when you attach a lens that has this
feature. (High*, Medium, Low)
162
Camera settings menu >
User settings
Color Space
The color space option allows you to select methods for representing
colors. Digital imaging devices such as digital cameras, monitors, and
printers have their own methods for representing colors, which are called
color spaces.
Adobe RGB
* Default
Option
Description
sRGB*
sRGB (Standard RGB) is an international specification
to define the color space created by IEC (International
Electrotechnical Commission). It is widely used for
creating colors on PC monitors and is also the standard
color space for Exif. sRGB is recommended for regular
images and images you intend to publish on the
Internet.
Adobe RGB
Adobe RGB is used for commercial printing and has a
larger color range than sRGB. Its wider range of colors
helps you to easily edit photos on a computer. Note
that individual programs are generally compatible
with a limited number of color spaces.
sRGB
When the color space is set to Adobe RGB, photos will be saved as
"_SAMXXXX.JPG".
163
Camera settings menu >
User settings
Distortion Correct
iFn Setting
You can correct lens distortion that might occur from lenses.
This feature may not be available with some lenses.
You can select options that can be adjusted when you press [i-Function]
on an i-Function lens.
Option
Description
• iFn Standard: Adjust the shutter speed, aperture
Touch Operation
Mode
Set to enable touch operation in Shooting mode.
* Default
Option
Description
Off
Do not use touch operations in Shooting mode. (You can use
touch operations in other situations.)
On*
Use touch operations in Shooting mode.
iFn Standard
value, and other options on the lens by pressing
[i-Function].
• iFn Plus: On an i-Function lens, press [i-Function]
and a button on the camera at the same time to
assign a function to that button.
Select options that can be adjusted when you press
[i-Function].
• Metering: Select an option that can be adjusted
iFn Plus
when you press [i-Function] and [N] together.
• EV: Select an option that can be adjusted when you
press [i-Function] and [W] together.
• AEL: Select an option that can be adjusted when
you press [i-Function] and [a] together.
164
Camera settings menu >
User settings
User Display
No.
You can add or remove shooting information from the display.
1
1
2
2
Description
Icons
Set to display icons on the right in Shooting mode.
Date & Time
Set to display the date and time.
Histogram
Set the histogram on the display on or off.
3
3
About histogram
A histogram is a graph that shows the brightness distribution of a
photo. A histogram inclined to the left indicates a dark photo.
A histogram inclined to the right indicates a bright photo. The height
of the graph is related to color information. The graph gets higher if a
specific color is more common.
Insufficient exposure
Balanced exposure
Excessive exposure
165
Camera settings menu >
User settings
Key Mapping
* Default
Button
Function
AEL
Set the AEL button’s function. You can change the
function assigned to the button to focus lock or
exposure lock. The AEL and AFL functions save the
exposure value or focus area respectively when
a photo is captured. A function executed by halfpressing [Shutter] varies according to the function
assigned to [a].
• AEL*: Execute the auto exposure lock function.
(Half-pressing [Shutter] executes the auto focus lock
function.)
• AEL Hold: Keep executing the auto exposure lock
function after shooting. (The exposure remains
locked even after you capture a photo.)
• AFL: Execute the auto focus lock function. (Halfpressing [Shutter] executes the auto exposure lock
function.)
• AEL + AFL: Execute the auto exposure and focus
lock functions together. (Half-pressing [Shutter]
executes no function.)
DIRECT LINK
Set the DIRECT LINK button's function. (AutoShare,
MobileLink, Remote Viewfinder, Baby Monitor,
Auto Backup, Email, SNS & Cloud, Samsung Link)
You can change the function assigned to the Preview button, the Custom
button, the AEL button or the DIRECT LINK button.
* Default
Button
Function
Preview
Set the Depth Preview button's function.
• Optical Preview*: Execute the Depth of Field
Preview function for the current aperture value.
(p. 24)
• One Touch WB (White Balance): Execute the Custom
White Balance function.
• One Touch RAW +: Save a file in the RAW+JPEG
format. To save a file in JPEG format, press the button
again.
Custom
Set the Custom button's function.
• Drive Settings*: Select a shooting method.
• AF Area: Select an auto focus area option directly.
• Reset: Reset some settings.
166
Camera settings menu >
User settings
Live view NFC
Display Select
In Shooting mode, turn on the NFC feature on an NFC-enabled smart
phone and place the smart phone's NFC antenna near the camera’s NFC
tag to launch AutoShare or Remote Viewfinder. This feature is supported
by NFC-enabled smart phones running Android OS. It is recommended
that you use the latest version. This feature is not available for iOS devices.
Set how the camera display and viewfinder function.
MobileLink/NFC Image Size
Set the size of photos to transfer to a smartphone using the MobileLink or
NFC functions.
* Default
Option
Description
Resize to 2M or
lower*
If a photo's size is larger than 3M, it will be transferred
after resizing it to 2M or lower.
Original
The photo will be transferred in its original size.
* Default
Option
Description
Auto*
Set the proximity sensor to automatically select the
display or viewfinder.
EVF Only
Set to use the viewfinder.
Main Display
Set to use the display.
• Wi-Fi functions, slideshow functions, and Manage Custom Mode, Edit Image
functions are not available when you use the viewfinder.
• The camera does not automatically select the display or viewfinder when you
record or play videos. For example, if you start recording or playing a video
while seeing through the viewfinder, the main display will not be available
during recording or playing back.
Grid Line
Select a guide to help you compose a scene.
(Off*, 4 X 4, 3 X 3, Cross, Diagonal)
167
Camera settings menu >
User settings
AF Lamp
Lens Button Speed Settings
When shooting in dark places, turn the AF lamp on in order to have a
better auto focus. The Auto Focus functions more accurately in dark places
when the AF lamp is on.
Set the zoom speed for the Power Zoom lens' buttons at either fast,
medium, or slow speed. At fast speed, zoom noise increases and can be
recorded in videos. This function is available only when you attach the the
Power Zoom lens.
E-Shutter
* Default
Option
Description
Off
Set to use the mechanical shutter. The fastest shutter speed is
limited to 1/6,000 s.
On*
Set to use the electronic shutter curtain first and the
mechanical curtain second. It allows you to use fast shutter
speeds from 1/6,000 to 1/8,000 s.
• This feature is available only when you attach a Samsung lens with Samsung
NX mount.
• When you use a large diameter lens and a fast shutter speed, a "bokeh" effect
(an aesthetic blur in out-of-focus areas) may be affected by the subject and
the shooting conditions. To make the bokeh effect appear correctly, set the
E-Shutter to Off.
• When you change the E-Shutter settings, the first curtain of the shutter is
adjusted and you will hear a noise as the shutter adjusts. This is a normal
situation when preparing the camera to operate the E-Shutter.
168
Camera settings menu
Setting
Learn to configure your camera's settings.
* Default
Item
To set Setting
options,
In Shooting or Playback mode, press [m] ĺ q ĺ
an option.
* Default
Item
Description
• System Volume: Set the sound volume or turn all sound
off entirely. (Off, Low, Medium*, High)
Even if the system volume is turned off, the camera emits
the sound while playing a video or a slide show.
Display
Adjust
Sound
Adjust the display brightness, auto brightness setting,
display color, or level gauge.
• Display Brightness: You can adjust the display
brightness manually.
• Auto Brightness: Turn auto brightness on or off.
(Off, On*)
• Display Color: You can adjust the display color manually.
• Horizontal Calibration: Calibrate the level gauge. If the
level gauge is not level, position the camera on the level
surface, and then follow the on-screen instructions.
• You cannot access the Horizontal Calibration option
• AF Sound: Set the sound the camera emits when you
half-press the shutter button on or off. (Off, On*)
• Button Sound: Set the sound the camera emits when
you press the buttons or touch the screen on or off.
(Off, On*)
• E-Shutter Sound: Set to emit a sound when you use the
electronic shutter. (Off*, On)
Description
in Playback mode.
• You cannot calibrate the level gauge in portrait
orientation.
Auto Display
Off
Set the display off time. The display turns off if you do not
use the camera for the time you set.
(Off, 30 sec*, 1 min, 3 min, 5 min, 10 min)
• The camera emits a sound only when the shutter speed
is longer than 0.5 second.
• This option may not be available in Smart mode.
Quick View
Set the Quick View time length–the amount of time the
camera displays a photo immediately after you capture it.
(Off, 1 sec*, 3 sec, 5 sec, Hold)
169
Camera settings menu >
Setting
* Default
Item
Description
Set power shut off time. The camera shuts off if you do not
use it for the time you set. (30 sec, 1 min*, 3 min, 5 min,
10 min, 30 min)
Power Save
• The camera retains the power-off time setting even if
* Default
Item
Date and
Time
you replace the battery.
• Power Save may not work if the camera is connected to
a computer or a TV or playing a slide show or a movie.
Help Guide
Display
Set to view the notification panel when the camera turns
on. (Off*, On)
Language
Set a language the camera shows on the display.
• The date appears on the lower right side of the photo.
• When you print a photo, some printers may not print
Video Out
Set the video signal output appropriate for your country
when connecting the camera to an external video device
such as a monitor or HDTV.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc.
• PAL (Supports only PAL B, D, G, H, or I): Australia, Austria,
Belgium, China, Denmark, Finland, France, Germany,
England, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway, etc.
Anynet+
(HDMI-CEC)
When you connect the camera to an HDTV that supports
Anynet+ (HDMI-CEC), you can control the play function of
the camera with the TV remote control.
• Off: You cannot control the play function of camera with
the TV remote control.
• On*: You can control the play function of camera with the
TV remote control.
Press [n] to hide the help text.
Quick Panel
Display
(Power On)
Set date, time, date format, time zone and whether to
imprint the date on photos. (Time Zone, Date Settings,
Time Settings, Date Type, Time Type, Imprint)
the date appropriately.
• Mode Help Guide: Set to display help text about the
selected mode when changing shooting modes.
(Off, On*)
• Function Help Guide: Set to display help text about
menus and functions. (Off, On*)
Description
170
Camera settings menu >
Setting
* Default
Item
Description
HDMI Output
When you connect the camera to an HDTV with an HDMI
cable, you can change the resolution of the image.
• NTSC: Auto*, 1080p, 720p, 480p,
576p (activates only when PAL is selected)
* Default
Item
Description
Set the method of numbering files and folders.
• Reset: After using the reset function, the next file name is
started at 0001.
• Series*: New file numbers continue the existing number
sequence, even if you have installed a new memory card,
formatted the card, or deleted all photos.
If the connected HDTV does not support the resolution
you select, the camera sets the resolution one level lower.
• The first folder name is 100PHOTO, if you have selected
3D HDMI
Output
Select an option for playing files on a 3D TV.
• Side by Side*: Displays two images next to each other.
• Frame Packing: Displays the images for the left and right
eye alternately in frames.
File Number
•
Set the method of creating file names.
• Standard*: SAM_XXXX.JPG (sRGB)/
_SAMXXXX.JPG (Adobe RGB)
• Date:
•
•
- sRGB files - MMDDXXXX.JPG. For example, for a photo
File Name
captured on Jan. 01, the file name would be
0101XXXX.jpg.
- Adobe RGB files - _MDDXXXX.JPG for the months Jan
through Sept. For the months Oct through Dec, the month
number is replaced by the letters A (Oct.), B (Nov.) and
C (Dec.).
For example, for a photo captured on Feb. 03, the file
name would be _203XXXX.jpg. For a photo captured on
Oct. 05, the file name would be _A05XXXX.jpg.
•
•
Folder Type
the sRGB color space and Standard file naming, the first
file name is SAM_0001.
File name numbers are increased by 1 from SAM_0001 to
SAM_9999.
Folder numbers are increased by 1 from 100PHOTO to
999PHOTO.
The maximum number of files that can be saved in one
folder is 9,999.
File numbers are assigned according to DCF (Design rule
for Camera File system) specifications.
If you change a file name (for example, on a computer),
the camera will not be able to play the file.
Set the type of folder.
• Standard*: XXXPHOTO
• Date: XXX_MMDD
171
Camera settings menu >
Setting
* Default
Item
Description
* Default
Item
Format the memory card. Formatting deletes all existing
files including protected files. (Yes, No*)
Format
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Set a frequency for using the camera as an AP for the
AutoShare, MobileLink, Remote Viewfinder, or Baby Monitor
feature. (2.4 GHz*, 5 GHz)
Dual-band
Mobile AP
View the firmware version of the body and the lens, Mac
address, and network certification number, or update the
firmware.
• Software Update: Update the firmware of the camera
body or lens. (Body Firmware, Lens Firmware)
• You can update the firmware by connecting the camera
Device
Information
to the computer and starting i-Launcher. For more
details, refer to page 195.
• You cannot run a firmware upgrade without a fully
charged battery. Recharge the battery fully before
running a firmware upgrade.
• If you update the firmware, user settings and values will
be reset. (Date, time, language, and video out will not
change.)
• Do not turn the camera off while the update is in
progress.
Description
If you use the camera in a country other than the one
where it was purchased, the 5 GHz Wi-Fi feature may not
function properly, due to differences in radio frequencies.
In this case, use the 2.4 GHz Wi-Fi feature instead.
• Sensor Cleaning: Remove dust from the sensor.
• Start-Up Action: When on, the camera performs sensor
cleaning each time you turn it on. (Off*, On)
Sensor
Cleaning
As this product uses interchangeable lenses, the sensor
can get dust on it when you change lenses. This can lead
to dust particles appearing in the photos you capture. It
is recommended not to change lenses when you are in a
particularly dusty area. Also, make sure to attach the lens
cap to the lens when not using it.
Reset
Reset the setup menu and shooting options to the factory
defaults. (Date, time, language, and video output settings
do not change.) (Yes, No*)
Open Source
License
View open source licenses.
172
Chapter 6
Connecting to external devices
Make full use of the camera by connecting it to external devices such as a computer, HDTV, or 3D TV.
Connecting to external devices
Viewing files on an HDTV or 3D TV
Play back photos or videos by connecting your camera to an HDTV (3D TV)
using an optional HDMI cable.
Viewing files on an HDTV
1
In Shooting or Playback mode, press [m] ĺ q ĺ
HDMI Output ĺ an option. (p. 171)
5
Turn on the camera.
6
View photos or play videos using the camera buttons.
• When using the HDMI cable, you can connect the camera to an HDTV using
the Anynet+(CEC) method.
• The Anynet+(CEC) functions allow you to control connected devices using the
TV remote control.
• If the HDTV supports Anynet+(CEC), the TV turns on automatically when used
2
Turn off your camera and HDTV.
•
3
Connect your camera to your HDTV with the optional HDMI
cable.
•
•
•
4
Turn on your HDTV, and then select the HDMI video source.
•
•
in conjunction with the camera. This feature may not be available on some
HDTVs.
You can capture a photo or video when the camera is connected to an HDTV,
but some functions are limited. Shooting functions are supported only when
HDMI Output is set to 1080p or Auto on the camera and the TV's HDMI
output option is set to 1080p.
When connected to an HDTV, some of the camera’s playback functions may
not be available.
The length of time after which the camera and an HDTV are connected may
vary depending on the memory card that you are using. As the main feature
of a memory card is to increase the transfer speed, it is not necessarily true
to say that a memory card with a faster transfer speed is also fast in using the
HDMI function.
1920X1080 (60 fps) videos can be played only on Full HDTVs capable of
playback at 60 fps.
To view 3D photos on a TV that does not support the 3D function, press the
ź button and switch to Anaglyph mode.
You can also play back or capture photos or videos when connected to an
HDMI-enabled monitor. Connections may vary depending on the monitor.
Refer to the monitor’s manual for more details.
174
Connecting to external devices >
Viewing files on an HDTV or 3D TV
Viewing files on a 3D TV
You can view photos or videos captured in 3D mode or with the 3D
Panorama option in Smart mode on a 3D TV.
1
2
In Shooting or Playback mode, press [m] ĺ q ĺ
HDMI Output ĺ an option. (p. 171)
7
Move to a 3D file, and then press [I] to switch to 3D mode.
• Press [I] again to switch to 2D Mode.
8
Turn on your TV's 3D function.
• Refer to your TV's user manual for more details.
9
View 3D photos or play 3D videos using the camera buttons.
Select 3D HDMI Output ĺ an option. (p. 171)
• You cannot view an MPO file in 3D effect on TVs that do not support the file
3
Turn off your camera and 3D TV.
4
Connect your camera to your 3D TV with the optional HDMI
cable.
format.
• Use proper 3D glasses when you view an MPO file or a 3D video file on a
3D TV.
• Capturing photos in 3D Panorama mode may result in a less pronounced 3D
effect than those captured in 3D mode with a 3D lens.
Do not view the 3D photos or videos captured by your camera on a 3D TV or
3D monitor for an extended period of time. It may cause unpleasant symptoms,
such as eyestrain, fatigue, nausea, and more.
5
Turn on your 3D TV, and then select the HDMI video source.
6
Turn on your camera.
175
Connecting to external devices
Transferring files to your computer
Transfer files on a memory card to your computer by connecting the
camera to the PC.
Transferring files to your Windows OS
computer
3
Turn on the camera.
• The computer recognizes the camera automatically.
4
On your computer, select My Computer ĺ Removable Disk
ĺ DCIM ĺ 100PHOTO or 101_0101.
5
Select the files you want, and then drag or save them to your
computer.
Connecting the camera as a removable disk
You can connect the camera to your computer as a removable disk. Open
the removable disk and transfer files to your computer.
1
Turn off the camera.
2
Connect the camera to your computer with the USB cable.
If the Folder Type is set to Date, the folder name appears as "XXX_MMDD".
For example, if you capture a photo on January 1, the folder name will be
"101_0101".
• You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
• If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
176
Connecting to external devices >
Transferring files to your computer
Disconnecting the camera (for Windows XP)
Transferring files to your Mac OS
With Windows Vista, Windows 7, and Windows 8, the methods for
disconnecting the camera are similar.
1
Ensure that no data is being transferred between the camera
and the computer.
• If the status lamp on your camera is blinking, it means the data
transfer is in progress. Please wait until the status lamp stops
blinking.
2
Click
on the tool bar at the bottom right of your computer
screen.
3
Click the pop-up message.
4
Click the message box indicating safely removed.
5
Remove the USB cable.
Mac OS 10.5 or later is supported.
1
Turn off the camera.
2
Connect your camera to a Macintosh computer with the USB
cable.
• You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
• If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
177
Connecting to external devices >
3
Transferring files to your computer
Turn on the camera.
• The computer recognizes the camera automatically and displays a
removable disk icon.
4
On your computer, open the removable disk.
5
Transfer photos or videos to the Mac OS computer.
178
Connecting to external devices
Using programs on a PC
You can view and edit files using the provided programs. You can also send
the files to a PC wirelessly.
Installing programs from the provided CD
1
Insert the installation CD into your PC.
2
Select a language.
3
Select a program to install.
4
Follow the on-screen instructions.
5
Click Exit to complete the installation.
Available programs when using i-Launcher
Item
Description
Firmware Upgrade
You can download the firmware of your camera.
PC Auto Backup
i-Launcher provides a link for downloading the
PC Auto Backup program when you connect the
camera to a computer. You can send photos or
videos that you captured with the camera to a
PC wirelessly.
179
Connecting to external devices >
Using programs on a PC
Using i-Launcher
• The requirements on the following page are recommendations only.
i-Launcher may not work properly even when the computer meets the
requirements, depending on the condition of your computer.
• If your computer does not meet the requirements, videos may not play
correctly.
i-Launcher allows you update the firmware of the camera or the lens or
provides a link to download the PC Auto Backup program.
Requirements for Windows OS
The manufacturer is not responsible for any damage that results from using
unqualified computers such as a computer you assembled yourself.
Item
Requirements
CPU
Intel® i5 3.3 GHz or higher/
AMD Phenom™ IIx4 3.2 GHz or higher
RAM
Minimum 512 MB RAM (1 GB or more recommended)
Requirements for Mac OS
OS*
Windows 7, Windows 8
Item
Requirements
Hard disk
capacity
250 MB or more (1 GB and above recommended)
OS
Mac OS 10.5 or higher (except PowerPC)
RAM
Minimum 256 MB RAM (512 MB or more
recommended)
Hard disk capacity
Minimum 110 MB
Others
USB 2.0 port, CD-ROM drive
• CD-ROM drive
• 1024X768 pixels, 16-bit color display compatible
Others
monitor (1280X1024 pixels, 32-bit color display
recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
* A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows 7 and
Windows 8.
Opening i-Launcher
On your computer, select Start ĺ All Programs ĺ Samsung ĺ
i-Launcher ĺ Samsung i-Launcher. Or, click Applications ĺ Samsung
ĺ i-Launcher on your Mac OS computer.
180
Connecting to external devices >
Using programs on a PC
Downloading the firmware
From the Samsung i-Launcher screen, click Firmware Upgrade. For
information about updating the firmware, refer to page 195.
Downloading the PC Auto Backup program
From the Samsung i-Launcher screen, click PC Auto Backup. For
information about installing the PC Auto Backup program, refer to page
149.
Installing Adobe Photoshop Lightroom
1
Insert Adobe Photoshop Lightroom DVD-ROM into your PC.
2
Select a language.
3
Follow the on-screen instructions.
Using Adobe Photoshop Lightroom
Photos captured by a camera are often transformed to JPEG formats and
stored in the memory according to the settings of the camera at the time
of shooting. RAW files are not transformed to JPEG formats and are stored
in the memory without any changes. With Adobe Photoshop Lightroom,
you can calibrate exposures, White Balances, tones, contrasts, and colors
of photos. You can also edit JPEG or TIFF files as well as RAW files. For more
information, refer to the program guide.
• Depending on your version of Adobe Photoshop Lightroom, you may not
be able to open RAW files. In this case, update the program from the Adobe
website.
• In Adobe Photoshop Lightroom, an image’s brightness, color and other effects
may be displayed differently. This occurs because the original camera settings
and options applied during image capture are removed, ready for it to be
processed in Adobe Photoshop Lightroom.
181
Chapter 7
Appendix
Get information about error messages, camera maintenance,
trouble shooting tips, specifications, and optional accessories.
Appendix
Error messages
When the following error messages appear, try these remedies.
Error messages
Suggested remedies
Folder and file
number are max
values. Replace
the card
File names do not match the DCF standard. Transfer
the files on the memory card to your computer and
format the card. (p. 172)
Error messages
Suggested remedies
Lens is locked
The lens is locked. Rotate the lens counter-clockwise
until you hear a click. (p. 50)
Card Error
• Turn off the camera, and then turn it on again.
• Remove the memory card and insert it again.
• Format the memory card.
Error 00
Turn off your camera and remount the lens. If the
message still appears, contact a service center.
Low Battery
Insert a charged battery or recharge the battery.
Error 01/02
No Image File
Capture photos or insert a memory card that contains
photos.
Turn off your camera, remove the battery, and insert
again. If the message still appears, contact a service
center.
File Error
Delete the damaged file or contact a service center.
Memory Full
Delete unnecessary files or insert a new memory card.
Card Locked
You can lock SD, SDHC, SDXC, or UHS-1 card to
prevent files from being deleted. Unlock the card
when shooting. (p. 187)
183
Appendix
Maintaining the camera
Cleaning the camera
Camera lens and display
Use a brush to remove dust and wipe the lens gently with a soft cloth.
If any dust remains, apply lens cleaning liquid to a piece of cleaning paper
and wipe gently.
Image sensor
Depending on different shooting conditions, dust may appear in photos
because the image sensor is exposed to the external environment. This
problem is normal, and the exposure to dust occurs in everyday use
of the camera. You can remove dust from the sensor by operating the
sensor cleaning function. (p. 172) If dust remains after cleaning the sensor,
contact a service center. Do not insert the blower into the mounting
opening of the lens.
Camera body
Wipe gently with a soft, dry cloth.
Never use benzene, thinners, or alcohol to clean the device. These solutions can
damage the camera or cause it to malfunction.
184
Appendix >
Maintaining the camera
Using or storing the camera
Using on beaches or shores
• Protect your camera from sand and dirt when you use it on beaches or in
Inappropriate places to use or store the camera
• Avoid exposing the camera to very cold or very hot temperatures.
• Avoid using your camera in areas with extremely high humidity, or
other similar areas.
• Your camera is not waterproof. Do not handle the battery, adapter, or
memory card with wet hands. Operating the camera with wet hands
may cause damage to your camera.
where the humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in hot, poorly
ventilated areas, such as in a car during summer time.
• Protect your camera and the display from impact, rough handling, and
excessive vibration to avoid serious damage.
• Avoid using or storing your camera in dusty, dirty, humid, or poorly
ventilated areas to prevent damage to moving parts and internal
components.
• Do not use your camera near fuels, combustibles, or flammable
Storing for extended period of time
• When you store the camera for an extended period, place it in a sealed
container with an absorbent material, such as silica gel.
• Over time, unused batteries will discharge and must be recharged before
use.
• The present date and time can be initialized when the camera is turned
on after the camera and battery have been separated for a prolonged
period.
chemicals. Do not store or carry flammable liquids, gases, or explosive
materials in the same compartment as the camera or its accessories.
• Do not store the camera where there are mothballs.
185
Appendix >
Maintaining the camera
Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one,
condensation can form on the lens or internal components of the camera.
In this situation, turn off the camera and wait for at least 1 hour.
If condensation forms on the memory card, remove the memory card from
the camera and wait until all moisture has evaporated before reinserting it.
Other cautions
• Do not swing your camera by the strap. This may cause injury to yourself
or others or damage to your camera.
• Do not paint your camera, as paint can clog moving parts and prevent
proper operation.
• Turn off the camera when not using it.
• Your camera consists of delicate parts. Avoid impacts to the camera.
• Protect the display from external force by keeping it in the case when
not in use. Protect the camera from scratches by keeping it away from
sand, sharp implements, or loose change.
• Do not use the camera if the screen is cracked or broken. Broken glass or
acrylic could cause injury to your hands and face. Take the camera to a
Samsung service center to have it repaired.
• Never place cameras, batteries, chargers, or accessories near, on, or in
• Do not expose the lens to direct sunlight, as this may discolor the image
sensor or cause it to malfunction.
• Protect your lens from fingerprints and scratches. Clean your lens with a
soft, clean, debris-free lens cloth.
• The camera may turn off if impacted from the outside. This is to protect
the memory card. Turn on the camera to use it again.
• While you use the camera, it may heat up. This is normal and should not
affect your camera’s lifespan or performance.
• When you use the camera in low temperatures, it may take some time to
turn on, the color of the display may be changed temporarily, or afterimages may appear. These conditions are not malfunctions and they will
correct themselves when the camera is returned to milder temperatures.
• Paint or metal on the outside of the camera may cause allergies,
itchy skin, eczema, or swelling for people with sensitive skin.
If you experience any of these symptoms, stop using the camera
immediately and consult a doctor.
• Do not insert foreign objects into any of your camera’s compartments,
slots, or access points. Damage due to improper use may not be covered
by your warranty.
• Do not allow unqualified personnel to service the camera or attempt to
service the camera yourself. Any damage that results from unqualified
service is not covered by your warranty.
heating devices, such as microwave ovens, stoves, or radiators. Heat can
deform or overheat these devices, which can cause a fire or explosion.
186
Appendix >
Maintaining the camera
About memory card
Memory card adapter
Supported memory card
This product supports SD (Secure Digital), SDHC (Secure Digital High
Capacity), SDXC (Secure Digital eXtended Capacity), UHS-1 (Ultra High
Speed-1), microSD, microSDHC, microSDXC, or microUHS-1 memory cards.
Terminal
Memory card
To use micro memory cards with this product, a PC, or a memory card
reader, insert the card into an adapter.
Write-protect switch
Label (front)
You can prevent files from being deleted by using the write-protect switch
on an SD, SDHC, SDXC, or UHS-1 card. Slide the switch down to lock or
slide it up to unlock. Unlock the card when capturing photos and videos.
187
Appendix >
Maintaining the camera
Memory card capacity
The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 2 GB SD card.
Quality
Size
Photo
Super Fine
Fine
Normal
RAW
RAW + S.Fine
RAW + Fine
RAW + Normal
20.0M (5472X3648)
150
180
224
57
41
43
45
10.1M (3888X2592)
271
325
405
-
52
53
55
5.9M (2976X1984)
411
492
613
-
58
60
61
2.0M (1728X1152)
797
952
1180
-
66
67
68
Burst
464
555
690
-
-
-
-
16.9M (5472X3080)
174
209
261
-
44
46
48
7.8M (3712X2088)
335
401
499
-
55
57
58
4.9M (2944X1656)
471
564
701
-
60
61
63
2.1M (1920X1080)
781
933
1158
-
66
66
67
13.3M (3648X3648)
214
257
321
-
48
50
52
7.0M (2640X2640)
363
435
542
-
56
58
59
4.0M (2000X2000)
538
643
800
-
62
63
64
1.1M (1024X1024)
1030
1227
1519
-
68
69
69
188
Appendix >
Maintaining the camera
Quality
Size
1920X1080 (60 fps)
1920X1080 (30 fps)
*
1920X1080 (15 fps)
Video
1920X810 (24 fps)
1280X720 (60 fps)
1280X720 (30 fps)
640X480 (30 fps)
For Sharing (30 fps)
*
•
•
•
•
•
HQ
Normal
Approx. 10' 10"
Approx. 12' 43"
Approx. 17' 41"
Approx. 22' 09"
Approx. 23' 38"
Approx. 29' 24"
Approx. 21' 35"
Approx. 27' 02"
Approx. 16' 51"
Approx. 21' 06"
Approx. 29' 11"
Approx. 36' 35"
Approx. 120' 47"
Approx. 153' 30"
Approx. 218' 48"
Approx. 278' 24"
is available only with some Smart Filter options.
The figures above are measured without using the zoom function.
Available recording time may vary if you use the zoom.
Several videos were recorded in succession to determine the total recording time.
The maximum recording time is 29 minutes and 59 seconds per file.
The maximum playback time of For Sharing videos is 30 seconds per file.
189
Appendix >
Maintaining the camera
Cautions when using memory cards
• Avoid memory cards to very cold or very hot temperatures (below
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause
memory cards to malfunction.
• Insert a memory card in the correct direction. Inserting a memory card in
the wrong direction may damage your camera and memory card.
• Do not use memory cards that have been formatted by other cameras or
by a computer. Reformat the memory card with your camera.
• Turn off the camera when you insert or remove the memory card.
• Do not remove the memory card or turn off your camera while the lamp
is blinking, as this may damage your data.
• When the lifespan of a memory card has expired, you cannot store any
• Prevent memory cards from making contact with liquids, dirt, or foreign
substances. If dirty, wipe the memory card clean with a soft cloth before
you insert the memory card in your camera.
• Do not allow liquids, dirt, or foreign substances to come in contact with
memory cards or the memory card slot. Doing so may cause memory
cards or the camera to malfunction.
• When you carry a memory card, use a case to protect the card from
electrostatic discharges.
• Transfer important data to other media, such as a hard disk, CD, or DVD.
• When you use the camera for an extended period, the memory card may
become warm. This is normal and does not indicate a malfunction.
• Use a memory card that meets the standard requirements.
more photos on the card. Use a new memory card.
• Do not bend, drop, or subject memory cards to heavy impact or
The manufacturer is not responsible for any loss of data.
pressure.
• Avoid using or storing memory cards near strong magnetic fields.
• Avoid using or keeping memory cards in areas with high temperature,
high humidity, or corrosive substances.
190
Appendix >
Maintaining the camera
About the battery
• Do not rest the device on flammable surfaces, such as bedding, carpets, or
Use only Samsung-approved batteries.
• When the device is switched on, do not leave it in any confined space for a
electric blankets for a prolonged period.
prolonged period.
• Do not allow battery terminals to come in contact with metallic objects, such
as necklaces, coins, keys, or watches.
Battery specifications
• Use only authentic, manufacturer-recommended, Lithium-ion replacement
Item
Description
Model
BP1410
Type
Lithium-ion battery
Cell capacity
1,410 mAh
Voltage
7.6 V
Charging time* (When the battery
is completely discharged.)
Approx. 200 min
* The figures above are based on when you use the provided USB cable and AC adaptor.
Charging the battery by connecting it to a computer may take longer.
Personal injury or death can occur if the battery is handled carelessly or
improperly. For your safety, follow these instructions for proper battery
handling:
• The battery can ignite or explode if not handled properly. If you notice
•
•
•
•
any deformities, cracks, or other abnormalities in the battery, immediately
discontinue use of the battery and contact your manufacturer.
Use only authentic, manufacturer-recommend battery chargers and charge
the battery only by the method described in this user manual.
Do not place the battery near heating devices or expose to excessively warm
environments, such as the inside of an enclosed car in the summertime.
Do not place the battery in a microwave oven.
Avoid storing or using the battery in hot, humid places, such as spas or
shower enclosures.
batteries.
• Do not disassemble the battery or puncture it with any sharp object.
• Avoid exposing the battery to high pressure or crushing forces.
• Avoid exposing the battery to major impacts, such as dropping it from high
places.
• Do not expose the battery to temperatures of 60 °C (140 °F) or above.
• Do not allow the battery to come in contact with moisture or liquids.
• Battery shall not be exposed to excessive heat such as sunshine, fire, or the
like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region. Dispose of the battery in
accordance with all local and federal regulations.
Guidelines for charging the battery
Charge the battery only by the method described in this user manual.
The battery can ignite or explode if not charged properly.
191
Appendix >
Maintaining the camera
Battery life
Notes about using the battery
Shooting mode
Average time / Number of photos
Photos
Approx. 180 min/Approx. 360 photos
Videos
Approx. 145 min (Record videos at 1920X1080
resolution and 60 fps.)
• The figures above are based on the CIPA test standards.
Your results may differ depending on your actual usage.
• Available shooting time differs depending on background, shooting
interval, and use conditions.
• Several videos were recorded in succession to determine the total
recording time.
• Avoid exposing batteries to very cold or very hot temperatures (below
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can reduce the
charging capacity of your batteries.
• When you use the camera for an extended period, the area around the
battery chamber may become warm. This does not affect the normal use
of the camera.
• Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
• In temperatures below 0 °C/32 °F, battery capacity and battery life may
decrease.
• Battery capacity may decrease in low temperatures, but will return to
normal in milder temperatures.
Low battery message
When the battery has fully discharged, the battery icon will turn red and
the "Low Battery" message will appear.
• Remove the batteries from your camera when storing it for an extended
period. Installed batteries may leak or corrode over time and cause
serious damage to your camera. Storing the camera for extended
periods with the battery installed causes the battery to discharge. You
may not be able to recharge a fully discharged battery.
• When you do not use the camera for an extended period (3 months or
more), check the battery and recharge it regularly. If you let the battery
discharge continually, its capacity and life may decrease, which can lead
to a malfunction, fire, or explosion.
192
Appendix >
Maintaining the camera
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage.
Prevent batteries from making contact with metal objects, as this can
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire or
electric shock.
Notes about charging the battery
• If the status lamp is off, ensure that the battery is inserted correctly.
• If the camera is on while charging, the battery may not fully charge. Turn
off the camera before charging the battery.
• Do not use your camera when you are charging the battery. This may
cause a fire or electric shock.
• Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
• If you connect the camera to an external power source when the battery
is depleted, using high energy-consuming functions will cause the
camera to turn off. To use the camera normally, recharge the battery.
• If you reconnect the power cable when the battery is fully charged, the
status lamp turns on for approximately 30 minutes.
• Using the flash or recording videos depletes the battery quickly. Charge
the battery until the red status lamp turns off.
• If the status lamp blinks in red, reconnect the cable, or remove the
battery and insert it again.
• If you charge the battery when the cable is overheated or the
temperature is too high, the status lamp may blink in red. Charging will
start when the battery cools down.
• Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may
damage the cable.
• Let the battery charge for at least 10 minutes before turning on the
camera.
193
Appendix >
Maintaining the camera
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your computer
- the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations when you
dispose of used batteries.
• Never place batteries or cameras on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may explode when they
are overheated.
194
Appendix
Updating the firmware
Connect the camera to the computer and update the firmware of the
camera of the lens.
• You cannot run a firmware upgrade without a fully charged battery. Recharge
the battery fully before running a firmware upgrade.
• If you update the firmware, user settings and values will be reset. (Date, time,
3
Turn on the camera.
4
On the computer, select i-Launcher ĺ Firmware Upgrade.
5
Follow the on-screen instructions to download the firmware to
the camera.
language, and video out will not change.)
• Do not turn the camera off while the update is in progress.
• You can download the firmware of the camera or the lens.
1
Turn off the camera.
6
Turn off the camera when the download completes.
2
Connect your camera to the computer with the USB cable.
7
Remove the USB cable.
8
Turn on the camera.
9
Press [m] ĺ q ĺDevice Information ĺSoftware
UpdateĺBody Firmware or Lens Firmware.
10 Select Yes from a pop-up window on the camera to update
• You must plug the small end of the USB cable into your camera. If the
the firmware.
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
• If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
195
Appendix
Before contacting a service center
If you are having trouble with your device, try these troubleshooting
solutions before contacting a service professional.
Situation
Suggested remedies
• There is no space on the memory card. Delete
unnecessary files or insert a new card.
When you leave your camera at a service center, be sure to also leave the other
components that may have contributed to the malfunction, such as the memory
card and battery.
Situation
Suggested remedies
Cannot turn on the
camera
• Ensure that the battery is inserted.
• Ensure that the battery is inserted correctly.
• Charge the battery.
• Charge the battery.
• Your camera may be in Power save mode or the
The power turns off
suddenly
display turns off automatically. (p. 170)
• The camera may be turned off automatically to
prevent the memory card from being damaged
due to excessive heat. Turn on your camera
again.
• The battery may lose power more quickly in
The camera is losing
battery power quickly
low temperatures (below 0 °C/32 °F). Keep the
battery warm by putting it into your pocket.
• Using the flash or recording videos depletes the
battery quickly. Recharge if needed.
• Batteries are consumable parts that must be
replaced over time. Get a new battery if the
battery life is diminishing quickly.
• Format the memory card.
• The memory card is defective. Get a new
Cannot capture
photos
memory card.
• The memory card is locked. Unlock the card.
(p. 187)
• Ensure that the camera is switched on.
• Charge the battery.
• Ensure that the battery is inserted correctly.
The camera freezes
Remove the battery and insert it again.
The camera heats up
While using the camera, it may heat up.
This is normal and should not affect your camera’s
lifespan or performance.
The flash fires
unexpectedly
The flash may fire due to static electricity.
The camera is not malfunctioning.
The flash does not
work
• The flash option may be set to Off. (p. 101)
• You cannot use the flash in some modes.
The date and time are
incorrect
Set the date and time under the q menu.
(p. 170)
The display or buttons
do not work
Remove the battery and insert it again.
196
Appendix >
Before contacting a service center
Situation
The memory card has
an error
Suggested remedies
Situation
Suggested remedies
• Turn off the camera, and then turn it on again.
• Remove the memory card, and then insert it
The colors in the
photo do not match
the actual scene
An incorrect White Balance can create unrealistic
color. Select the proper White Balance option to
suit the light source. (p. 81)
The photo is too
bright or too dark.
Your photo is overexposed or underexposed.
• Adjust the aperture value or the shutter speed.
• Adjust the ISO sensitivity. (p. 79)
• Turn the flash off or on. (p. 101)
• Adjust the exposure value. (p. 111)
Photos are distorted
This camera can have minute distortion when
using a wide-angle lens that enables shooting
with a wide angle of view. This is normal, and
does not cause malfunction.
again.
• Format the memory card.
See "Cautions when using memory cards" for
more details. (p. 190)
Your computer does
not recognize an SDXC
or UHS-1 memory card
SDXC memory cards use the exFAT file system. To
use SDXC memory cards or UHS-1 memory cards
that are formatted with the exFAT file system on
a Windows XP computer, download and update
the exFAT file system driver from the Microsoft
website.
Your TV or computer
cannot display photos
and videos that are
stored on an SDXC or
UHS-1 memory card
SDXC memory cards use the exFAT file system. To
use SDXC memory cards or UHS-1 memory cards
that are formatted with the exFAT file system,
ensure that the external device is compatible
with the exFAT file system before connecting the
camera to the device.
Playback screen does
not appear on the
connected external
device
Cannot display files
If you change the name of a file, your camera may
not play the file (the name of the file should meet
the DCF standard). If you encounter this situation,
display files on your computer.
Your computer does
not recognize your
camera
• Ensure that the focus option you set is suitable
The photo is blurry
for the kind of shot you are capturing.
• Use a tripod to prevent your camera from
shaking.
• Ensure that the lens is clean. If not, clean the
lens. (p. 184)
• Ensure that HDMI cable is properly connected
to the external monitor.
• Ensure that the memory card is properly
recorded.
• Ensure that the USB cable is connected
correctly.
• Ensure that the camera is switched on.
• Ensure that you are using a supported
operating system.
Your computer
disconnects the
camera while
transferring files
The file transfer may be interrupted by static
electricity. Disconnect the USB cable and connect
it again.
197
Appendix >
Before contacting a service center
Situation
Suggested remedies
• End i-Launcher and restart the program.
• Depending on your computer's specifications
i-Launcher is not
functioning properly
and environment, the program may not
launch automatically. In this case, click
Start ĺ All Programs ĺ Samsung ĺ
i-Launcher ĺ Samsung i-Launcher on your
Windows computer. (For Windows 8, open
Start screen, and then select All apps ĺ
Samsung i-Launcher.) Or, click Applications
ĺ Samsung ĺ i-Launcher on your Mac OS
computer.
• Subject is not in focus. When the subject is
Auto Focus does not
work
outside the AF area, shoot by moving the
subject inside the AF area and half-pressing
[Shutter].
• Subject is too close. Step back from the subject
and shoot.
• The focus mode is set to MF. Switch the mode
to AF.
Situation
Suggested remedies
AEL feature does not
work
AEL feature does not work in t, M, i,
and s modes. Select another mode to use this
feature.
Lens does not work
• Ensure that the lens is properly mounted.
• Remove the lens from the camera and
remount it.
External flash does not
work
The date & time
settings screen
appears when you
power on the camera
Ensure that the external device is properly
mounted and turned on.
• Set the date and time again.
• This screen appears when the camera’s internal
power source is completely discharged. Insert
a fully charged battery and wait at least 72
hours in power off status for the internal power
source to be recharged.
198
Appendix
Camera specifications
Image Sensor
Display
Type
CMOS
Sensor size
23.5X15.7 mm
Effective pixels
Approx. 20.3 mega-pixels
Total pixels
Approx. 21.6 mega-pixels
Color filter
RGB primary color filter
Lens Mount
Type
Samsung NX Mount
Available lens
Samsung lenses
Image Stabilization
Type
Lens shift (depends on lens)
Mode
Off/Mode 1/Mode 2
Distortion Correct
Off/On (depends on lens)
i-Function
Type
Super AMOLED with Touch Panel (C-type Touch
Control Enabled)
Size
3.0" (Approx. 76.7 mm)
Resolution
FVGA (720X480) 1037 k dots (S-Stripe)
Field of view
Approx. 100 %
Angle
Swivel (Horizontal 180°, Vertical 270°)
User display
Grid Line, Icons, Histogram, Distance Scale, Level
gauge, Overexposure Guide
Viewfinder
Elements in Group
3 Aspherical lens
Eye relief
Approx. 18.5 mm
Diopter adjustment
Approx. -4.0–+1.0 DPT
Field of view
Approx. 100 %
Magnification
Approx. 0.96 X (APS-C, 50 mm)
E, Z (X1.2, 1.4, 1.7, 2.0), G
Dust Reduction
Type
Super sonic drive
199
Appendix >
Camera specifications
Focusing
Type
Exposure
• Total AF point: 105 points (Phase Detection
Focusing point
AF), 247 points (Contrast AF)
• Selection: 1 point (Free selection)
• Multi: Normal 21 (3X7) points,
Close up 35 points
• Face detection: Max. 10 faces
Mode
Single AF, Continuous AF, Manual Focus, Touch
AF & Shutter
AF Assist Lamp
Yes
Shutter
Type
Metering system
(EFS available)
• Bulb (time limit: 4 min)
The fastest shutter speed is limited to 1/6,000 sec.
when you use the mechanical shutter.
Metering: Multi, Center-weighted, Spot
Metering range: EV -3–18 (ISO100 · 30 mm, F2)
Compensation
±3 EV (1/3 EV Step)
AE lock
AEL button
• 1 Step: Auto, ISO 100, ISO 200, ISO 400,
ISO equivalent
Electronically controlled vertical-run focal plane
shutter
• Auto: 1/8,000–1/4 sec. (EFS available)
• Manual: 1/8,000–30 sec. (1/3 EV Step)
Speed
TTL 221 (17X13) Block segment
Hybrid AF (Phase Detection & Contrast)
ISO 800, ISO 1600, ISO 3200, ISO 6400,
ISO 12800, ISO 25600
• 1/3 Step: Auto, ISO 100, ISO 125, ISO 160,
ISO 200, ISO 250, ISO 320, ISO 400, ISO 500,
ISO 640, ISO 800, ISO 1000, ISO 1250,
ISO 1600, ISO 2000, ISO 2500, ISO 3200,
ISO 4000, ISO 5000, ISO 6400, ISO 8000,
ISO 10000, ISO 12800, ISO 16000, ISO 20000,
ISO 25600
* Auto ISO settings are selectable up to ISO 3200.
200
Appendix >
Camera specifications
Drive Mode
Sync speed
Less than 1/200 sec.
Single, Continuous, Burst (5M only), Timer,
Bracket (Auto Exposure, White Balance, Picture
Wizard, Depth)
Flash EV
-2–+2 EV (0.5 EV Step)
External flash
Optional Samsung external flashes
• JPEG: High (9 fps), Normal (4 fps)
• Burst: 10, 15, or 30 frames per second
• RAW: High (9 fps), Normal (4 fps)
Sync terminal
Hot-shoe
Continuous shooting
Bracket shooting
Auto exposure bracketing (±3 EV),
White Balance bracketing,
Picture Wizard bracketing, Depth bracketing
Self-timer
2–30 sec. (1 second interval)
Shutter release
via Micro USB port
Mode
White Balance
Mode
Auto WB, Daylight, Cloudy, Fluorescent White,
Fluorescent NW, Fluorescent Daylight, Tungsten,
Flash WB, Custom Set, Color Temperature
(Manual)
Micro adjustment
Amber/Blue/Green/Magenta 7 steps respectively
Dynamic Range
Off/Smart Range+/HDR
Flash
Type
A-TTL pop-up flash
Mode
Smart Flash, Auto, Auto Red-eye, Fill in,
Fill-in Red, 1st Curtain, 2nd Curtain, Off,
Auto FP Sync (available only with supported
external flashes)
Guide number
11 (based on ISO 100)
Angle of view
28 mm (35 mm film equivalent)
Picture Wizard
Mode
Standard, Vivid, Portrait, Landscape, Forest,
Retro, Cool, Calm, Classic, Custom1, Custom2,
Custom3
Parameter
Color, Saturation, Sharpness, Contrast
201
Appendix >
Camera specifications
Shooting
Mode
Smart Auto, Program, Aperture Priority,
Shutter Priority, Manual, Custom1, Custom2,
Lens Priority, Smart
Smart mode
Beauty Face, Best Face, Landscape, Macro,
Action Freeze, Rich Tones, Panorama, Waterfall,
Silhouette, Sunset, Night, Fireworks, Light Trace,
Creative Shot, Multi Exposure, Smart Jump Shot
Smart filter
Size
SRW (ver.2.0.0)
Color space
sRGB, Adobe RGB
Video
Type
MP4 (H.264)
Format
Movie: H.264, Sound: AAC
Movie AE mode
Vignetting, Miniature, Colored Pencil, Watercolor,
Wash drawing, Oil Sketch, Ink Sketch, Acryl,
Negative, Red, Green, Blue, Yellow
Program, Aperture Priority, Shutter Priority,
Manual
Movie clip
Audio on/off (Shooting time: Max. 29' 59'')
• JPEG (3:2): 20.0M (5472X3648),
Smart filter
Vignetting, Miniature, Colored Pencil, Watercolor,
Wash drawing, Oil Sketch, Ink Sketch, Acryl,
Negative, Red, Green, Blue, Yellow
Size
1920X1080, 1920X810, 1280X720, 640X480,
320X240 (For Sharing)
Frame rate
60 fps, 30 fps, 24 fps (available only with
1920X810) (3D: only 30 fps is available)
Multi Motion
x0.25 (640X480, 320X240 only), x0.5 (1280X720,
640X480, 320X240 only), x5, x10, x20
Quality
HQ, Normal
Sound
Stereo (with Input Level Adjustment, Audio Level
Display)
Edit
Still image capture, Time trimming
10.1M (3888X2592), 5.9M (2976X1984),
5.0M (2736X1824) (Burst mode only),
2.0M (1728X1152)
• JPEG (16:9): 16.9M (5472X3080),
7.8M (3712X2088), 4.9M (2944X1656),
2.1M (1920X1080)
• JPEG (1:1): 13.3M (3648X3648),
7.0M (2640X2640), 4.0M (2000X2000),
1.1M (1024X1024)
• RAW: 20.0M (5472X3648)
* 3D mode with 3D lens is available only with
JPEG (16:9) 4.1M (2688X1512) or 2.1M (1920X1080).
Quality
RAW standard
Super Fine, Fine, Normal
202
Appendix >
Camera specifications
Playback
Interface
Type
Single image, Thumbnails (15/24), Slide show,
Movie
Digital output
USB 2.0 (micro USB jack)
Video output
Edit
Smart Filter, Red-eye Fix, Backlight, Resize,
Rotate, Face Retouch, Display Brightness,
Contrast
• NTSC, PAL (selectable)
• HDMI
Audio interface
3.5 mm stereo mic input
External release
Yes
Smart filter
Vignetting, Miniature, Colored Pencil, Watercolor,
Wash drawing, Oil Painting, Ink Painting, Acryl,
Negative, Red, Green, Blue, Yellow
External microphone
Yes
DC power input
DC 5.0 V, 1 A via micro USB
Storage
Media
External memory (optional)*:
SD card (2 GB guaranteed),
SDHC card (up to 32 GB guaranteed),
SDXC card (up to 64 GB guaranteed), UHS-1 card
* Class 6 and above recommended
File format
RAW (SRW (ver.2.0.0)), JPEG (EXIF 2.3),
MPO (3D), DCF
Wireless network
Type
IEEE 802.11b/g/n support Dual Band
Function
MobileLink, Remote Viewfinder, Baby Monitor,
Auto Backup, Email, SNS & Cloud, Samsung
Link, AutoShare, Group Share, Photo Beam,
HomeSync
NFC
Yes
Power Source
Type
Rechargeable battery:
BP1410 (1,410 mAh, 7.6 V )
* The power source may differ depending on your region.
Dimensions (W X H X D)
127 X 95.5 X 41.7 mm (without protrusions)
Weight
375 g (without battery and memory card)
Operating Temperature
0–40 °C
Operating Humidity
5–85%
Software
i-Launcher, Adobe Photoshop Lightroom 5
* Specifications may change without notice to improve performance.
* Other brands and products names are trademarks of respective owners.
203
Appendix
Glossary
AP (Access Point)
AEL/AFL (Auto Exposure Lock/Auto Focus Lock)
An access point is a device that allows wireless devices to connect to a
wired network.
These features help you lock the exposure or focus on which you want to
focus or calculate the exposure.
Ad-Hoc network
AF (Auto Focus)
An ad-hoc network is a temporary connection for sharing files or an
internet connection and between computers and devices.
A system that automatically focuses the camera lens on the subject. Your
camera uses the contrast to focus automatically.
AdobeRGB
AMOLED (Active-matrix organic light-emitting diode)/
LCD (Liquid Crystal Display)
Adobe RGB is used for commercial printing and has a larger color range
than sRGB. Its wider range of colors helps you to easily edit photos on a
computer.
AMOLED is a visual display that is very thin and light, as it does not
need backlighting. LCD is a visual display commonly used in consumer
electronics. This display needs a separate backlight, such as CCFL or LED, to
reproduce colors.
AEB (Auto Exposure Bracket)
This feature automatically captures several images at different exposures
to help you capture a properly-exposed image.
Aperture
The aperture controls the amount of light that reaches the camera’s sensor.
204
Appendix >
Glossary
Camera shake (Blur)
Composition
If the camera is moved while the shutter is open, the entire image may
appear blurred. This occurs more often when the shutter speed is slow.
Prevent camera shake by raising the sensitivity, using the flash, or using
a faster shutter speed. Alternatively, use a tripod or the OIS function to
stabilize the camera.
Composition in photography means arranging objects in a photo. Usually,
abiding by the rule of thirds leads to a good composition.
Cloud Computing
DCF (Design rule for Camera File system)
A specification to define a file format and file system for digital cameras
created by the Japan Electronics and Information Technology Industries
Association (JEITA).
Cloud computing is a technology that allows you to store data on remote
servers and to use them from a device with internet access.
Depth of field
Color space
The range of colors that the camera can see.
The distance between the nearest and farthest points that can be
acceptably focused in a photograph. Depth of field varies with lens
aperture, focal length, and distance from the camera to the subject.
Selecting a smaller aperture, for example, will increase the depth of field
and blur the background of a composition.
Color temperature
Color Temperature is a measurement in degrees Kelvin (K) that indicates
the hue of a specific type of light source. As the color temperature
increases, the color of the light source has a more bluish quality. As the
color temperature decreases, the color of the light source has a more
reddish quality. At 5,500 degrees Kelvin, the color of the light source is
similar to the sun at midday.
205
Appendix >
Glossary
EV (Exposure Value)
Flash
All the combinations of the camera’s shutter speed and lens aperture that
result in the same exposure.
A speed light that helps to create adequate exposure in low-light
conditions.
EV Compensation
Focal length
This feature allows you to quickly adjust the exposure value measured by
the camera, in limited increments, to improve the exposure of your photos.
The distance from the middle of the lens to its focal point(in millimeters).
Longer focal lengths result in narrower angles of view and the subject is
magnified. Shorter focal lengths result in wider angles of view.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras created by
the Japan Electronic Industries Development Association (JEIDA).
Exposure
The amount of light allowed to reach the camera’s sensor. Exposure is
controlled by a combination of the shutter speed, the aperture value, and
ISO sensitivity.
Histogram
A graphical representation of the brightness of an image. The horizontal
axis represents the brightness and the vertical axis represents the number
of pixels. High points at the left (too dark) and right (too bright) on the
histogram indicate a photo that is improperly exposed.
H.264/MPEG-4
A high-compression video format established by international standard
organizations ISO-IEC and ITU-T. This codec is capable of providing good
video quality at low bit rates developed by the Joint Video Team (JVT).
206
Appendix >
Glossary
Image sensor
Metering
The physical part of a digital camera that contains a photosite for each
pixel in the image. Each photosite records the brightness of the light that
strikes it during an exposure. Common sensor types are CCD (Chargecoupled Device) and CMOS (Complementary Metal Oxide Semiconductor).
The metering refers to the way in which the camera measures the quantity
of light to set the exposure.
MF (Manual Focus)
IP (Internet protocol) address
A system that manually focuses the camera lens on the subject.
You can use the focus ring to focus on a subject.
An IP address is a unique number that is assigned to every device that is
connected to the internet.
MJPEG (Motion JPEG)
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film speed
used in a film camera. At higher ISO sensitivity settings, the camera uses a
higher shutter speed, which can reduce blur caused by camera shake and
low light. However, images with high sensitivity are more susceptible to
noise.
A video format which is compressed as a JPEG image.
MPO (Multi Picture Object)
An image file format that contains multiple images in a file. An MPO file
provides a 3D effect on MPO-compatible displays, such as 3D TVs or 3D
monitors.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images are
compressed to reduce their overall file size with minimal deterioration of
the image resolution.
207
Appendix >
Glossary
Noise
PAL (Phase Alternate Line)
Misinterpreted pixels in a digital image that may appear as misplaced or
random, bright pixels. Noise usually occurs when photos are shot with a
high sensitivity or when a sensitivity is automatically set in a dark place.
A video color encoding standard used in numerous countries throughout
Africa, Asia, Europe, and the Middle East.
Quality
NFC (Near Field Communication)
NFC is a set of standards for radio communication at very close proximity.
You can use NFC-enabled devices to activate features or exchange data
with other devices.
An expression of the rate of compression used in a digital image. Higher
quality images have a lower rate of compression, which usually results in a
larger file size.
RAW (CCD raw data)
NTSC (National Television System Committee)
A video color encoding standard used most commonly in Japan, North
America, the Philippines, South America, South Korea, and Taiwan.
The original, unprocessed data, collected directly from the camera’s image
sensor. White Balance, contrast, saturation, sharpness, and other data can
be manipulated with editing software before the image is compressed into
a standard file format.
Optical zoom
This is a general zoom which can enlarge images with a lens and does not
deteriorate quality of images.
Resolution
The number of pixels present in a digital image. High resolution images
contain more pixels and typically show more detail than low resolution
images.
208
Appendix >
Glossary
Shutter speed
White Balance (Color balance)
Shutter speed refers to the amount of time it takes to open and close the
shutter, and it is an important factor in the brightness of a photo, as it
controls the amount of light which passes through the aperture before
it reaches the image sensor. A fast shutter speed allows less time to let
light in and the photo becomes darker and more easily freezes subjects in
motion.
An adjustment of the intensities of colors (typically the primary colors red,
green, and blue), in an image. The goal of adjusting the White Balance, or
color balance, is to correctly render the colors in an image.
sRGB (Standard RGB)
International standard of color space established by the IEC (International
Electrotechnical Commission). This is defined from color space for PC
monitors and is also used as the standard color space for Exif.
Wi-Fi
Wi-Fi is a technology that allows electronic devices to exchange data
wirelessly over a network.
WPS (Wi-Fi Protected Setup)
WPS is a technology that secures wireless home networks.
Vignetting
A reduction of an image’s brightness or saturation at the periphery (outer
edges) compared to the center of the image. Vignetting can draw interest
to subjects positioned in the center of an image.
209
Appendix
Optional accessories
You can purchase the following optional items:
Lens, External flash, Shutter release (micro USB type), External microphone,
Rechargeable battery, Battery charger, Camera bag, Camera case, Memory
card, Filter, USB cable, HDMI cable, Strap
• To locate the type, image and availability of accessories, visit the Samsung
website.
• Before purchasing accessories, make sure they are compatible with your
camera. GPS10 and EM10 are not compatible with this camera.
• Use only Samsung-approved accessories. Samsung is not responsible for
damage caused by using another manufacturer’s accessories.
210
Appendix
Index
A
Adobe Photoshop Lightroom 181
Aperture 16, 20
Camera specifications 199
Charging 35
Color space 163
Files
Deleting 123
Photo type 78
Protecting 122
Video type 114
D
Date & Time 170
Depth of Field (DOF) 17, 22
B
Baby Monitor 147
Battery
Caution 191
Charging 35
Insert 34
Best Face mode 68
Bracketing 98
Flash
Bounce photography 27
Flash options 101
Guide number 26
Intensity 103
DIRECT LINK 33
Display brightness 169
Display type 48
Drive 95
F-number 16
E
Exposure Value (EV) 16, 111
Camera
Connecting as removable disk 176
Connecting to PC 176
Disconnecting (Windows) 177
Layout 30
ISO sensitivity 79
L
Lenses
Layout 49
Locking 50
Markings 52
Unlocking 51
Focal length 21
Focus assist 92
M
Focus Peaking 93
Maintenance 184
Enlarging 124
C
Adjusting photos 131
Red-eye 132
Retouching faces 132
Fader 116
Auto Backup 149
Auto focus 84
Image adjustment
F
Memory card
Caution 187
Insert 34
I
Icons
Playback mode 47
Shooting mode 45
Metering 106
MobileLink 143
i-Launcher 180
211
Appendix >
Index
N
NFC (Tag & Go) 140
O
One touch shot 91
Optical Image Stabilization (OIS)
94
Optional accessories
Connect the flash 54
Flash layout 53
Manual 61
Program 57
Recording 72
Shutter Priority 60
Smart 66
Smart Auto 55
Posture 13
Power save mode 170
R
Red-eye effect
Playback mode 132
Shooting mode 102
Remote Viewfinder 145
Shutter speed 18, 20
Slide show 124
Smart filter
Panorama mode 69
Photos
Editing 129
Enlarging 124
Shooting options 77
Viewing on 3D TV 175
Viewing on camera 119
Viewing on HDTV 174
Picture Wizard 83
Rotating 130
Rule of thirds 24
V
Video Out 170
Videos
Capturing 128
Options 114
Recording 72
Viewing 126
Smart Jump Shot 71
Smart panel 40
W
Retouching faces 132
P
Unpacking 29
Playback mode 133
Shooting mode 110
Resolution
Playback mode 130
Shooting mode (Movie) 114
Shooting mode (Photo) 77
U
T
White balance 81
Thumbnails 119
Wireless network 135
Timer 97
S
Touch AF 90
Samsung Link 157
Touch screen 38
Service center 196
Tracking AF 90
Settings 169
Transferring files
Shooting modes
Aperture Priority 59
Custom 63
3
3D mode 73
Mac 177
Windows 176
TV 174
212
Appendix
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the product, accessories, or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
This marking on the battery, manual, or packaging indicates that the
batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd, or Pb indicate that the battery contains mercury, cadmium, or
lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or
the environment.
Household users should contact either the retailer where they purchased
this product or their local government office for details of where and how
they can take these items for environmentally safe recycling.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
CAN ICES-3 (B)/NMB-3(B)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799
213
Appendix
FCC notice
Caution:
Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void theuser's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID:A3LNX30
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna must not be colocated or operating in conjunction with any other antenna or transmitter.
Caution:
Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
user’s authority to operate the equipment.
IC: 649E-NX30
214
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Declaration of Conformity
Trade Name : Samsung Electronics America, Inc.
Model No. : Samsung NX30
Responsible Party: Samsung Electronics America, Inc.
Address : 85 Challenger Road, Ridgefield Park, NJ 07660
Telephone No.: 1-800-SAMSUNG (726-7864)
This device complies with Industry Canada License-Exempt RSS standard (S)
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution:
Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
user’s authority to operate the equipment.
Complies with
IDA Standards
DA100790
Model : NX30
Year of Manufacture : 2014
IC: 649E-NX30
33017/SDPPI/2014
1258
This equipment may be operated in all EU countries.
TRC/SS/2014/5
No.: ESD-1408378C
In France, this equipment may only be used indoors.
TA-2013/1994
APPROVED
215
Please refer to the warranty that came with your product
or visit our website www.samsung.com for after-sales service or inquiries.

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project