GMC Envoy 2008 Guide

Add to my manuals
20 Pages

advertisement

GMC Envoy 2008 Guide | Manualzz
DRIVER INFORMATION
Instrument Panel . . . . . . . . . . . . . .2
Instrument Panel Cluster . . . . . . .3
Driver Information Center . . . . . . .4
SAFETY & SECURITY
Lockout Protection . . . . . . . . . . . .5
OnStar® . . . . . . . . . . . . . . . . . . . . . .5
Content Theft-Deterrent System .6
COMFORT
Manual Dual-Zone Climate
Controls . . . . . . . . . . . . . . . . . . . . .7
Automatic Dual-Zone Climate
Controls . . . . . . . . . . . . . . . . . . . . .8
Rear Seat Climate Controls . . . . .9
Electric Adjustable Pedals . . . . . .9
Heated Front Seats . . . . . . . . . . .10
Memory Seats . . . . . . . . . . . . . . .10
ENTERTAINMENT
Audio Systems . . . . . . . . . . . . . .11
Multiple-Disc CD Player . . . . . . .11
CONVENIENCE
Headlamp Controls . . . . . . . . . . .12
Headlamp Washers . . . . . . . . . . .13
Interior Lamps . . . . . . . . . . . . . . .14
Heated, Power Outside Mirrors .14
Universal Home Remote . . . . . . .14
Sun Visors . . . . . . . . . . . . . . . . . .15
Luggage Carrier . . . . . . . . . . . . .15
Air Inflator System . . . . . . . . . . .16
PERFORMANCE & MAINTENANCE
Malfunction Indicator Lamp . . . .16
Electronically Controlled
Air Suspension . . . . . . . . . . . . . .16
Four-Wheel Drive . . . . . . . . . . . .17
StabiliTrak® – Stability Control
System . . . . . . . . . . . . . . . . . . . . .17
Tire Pressure Monitor . . . . . . . . .18
OWNER INFORMATION
Roadside Assistance . . . . . . . . .20
My GMLink . . . . . . . . . . . . . . . . . .20
Congratulations on your purchase of a GMC Envoy. Please read this information and your Owner Manual to
ensure an outstanding ownership experience. Note that your vehicle may not include all the features
described in this booklet. Keep this booklet with your Owner Manual for easy reference.
2
Getting to Know Your Envoy
DRIVER INFORMATION
Instrument Panel
A. Exterior Lamp Controls
B. Air Outlets
C. Turn Signal/Multifunction
Lever
D. OnStar®/Audio Steering
Wheel Controls
E. Instrument Panel Cluster
F. Audio Steering Wheel
Controls
G. Ignition Switch
H.
I.
J.
K.
Audio System
Climate Controls
Hood Release
Driver Information
Center (DIC)
Steering Wheel
Controls
L. Transfer Case
Controls
M. Shift Lever
N.
O.
P.
Q.
Lighter
Accessory Power Outlet
Parking Brake
Rear Window
Washer/Wiper
R. Rear Window Defogger
S. Glove Box
See Section 3 of your Owner Manual.
3
Instrument Panel Cluster
A
C
B
Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument panel cluster
includes these key features:
A. Tachometer
B. Speedometer
C. Oil Pressure Gauge
D. Fuel Gauge
E. Voltmeter
F. Engine Coolant Temperature Gauge
D
E
F
Note: The instrument panel cluster is
designed to let you know about many
important aspects of your vehicle’s
operation. It is important to read your
Owner Manual and become familiar
with the information being relayed to
you by the lights, gauges and indicators,
as well as what action can be taken to
ensure safety and to prevent damage.
See Section 3 of your Owner Manual.
4
Getting to Know Your Envoy
Driver Information Center
(if equipped)
Your vehicle’s Driver Information Center
(DIC) is located in the instrument panel
cluster.
Access DIC modes
• Press one of the following DIC buttons located on the steering wheel.
– Trip Information ( )
– Fuel Information ( )
– Customization ( )
– Select settings ( )
Trip Information Button
• Press
to scroll through the
odometer, trip A, trip B, tire pressures, and timer. When either trip A
or trip B is displayed, you can press
the Select button ( ) to reset the
displayed odometer.
• You can also reset a trip odometer
to zero by pressing and holding the
reset stem for four seconds. When
TIMER is displayed, you can press
to start or stop the timer. To reset
it to zero, push and hold
while
TIMER is displayed.
Note: If your vehicle is not equipped
with DIC steering wheel buttons, press
the trip odometer reset stem located in
the instrument panel cluster to select
the information. Hold the stem for four
seconds to reset trip odometers.
Fuel Information Button
• Press
to scroll through the range,
fuel used, average fuel economy, and
the GM Oil Life SystemTM.
• Range estimates the remaining distance you can drive without refueling.
Range is based on recent fuel economy and the fuel remaining in the tank.
• Average fuel economy calculates how
many miles per gallon you are getting
based on overall driving conditions.
Press and hold the Select button
( ) while AVG. ECON is displayed
and the DIC will begin calculating the
average fuel economy from that point
in time.
• Fuel used shows the current amount
of fuel used in gallons since the last
reset.
• Engine oil life calculates an estimate
(percentage) of the engine oil’s
remaining useful life. It also will alert
you when it is time to change your oil
by illuminating the CHANGE ENG
OIL light on the DIC. Please remember to always reset the oil life system
after an oil change by pressing and
holding
for four seconds while
ENGINE OIL LIFE is displayed. When
successful, the DIC will display
ENGINE OIL LIFE: 100%.
5
Customization Button
• Press to scroll through the customization features.
Select Button
• Press
to select your customization feature setting while it is
displayed on the DIC.
• The customization features can be
reset to their default mode by holding
and down for four seconds.
Language Options
• If you find that the unit displays a language other than the one you prefer
and you are unable to change it, hold
and down until the display
begins cycling through the three
available languages. Release the
buttons when you see the preferred
language.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Lockout Protection
Prevent your ignition key from being
locked in your vehicle
• When the key is in the ignition and
a door is open, pressing any power
door lock switch unlocks the driver’s
door and locks all other doors.
See Section 2 of your Owner Manual.
OnStar ® (if equipped)
Your vehicle may feature the OnStar
Safe & Sound Plan or the uplevel
OnStar Directions & Connections Plan,
with one year of OnStar service from the
date you purchased your new vehicle.
With the help of OnStar Advisors, who
are available 24 hours a day, 7 days a
week, OnStar offers a wide variety of
safety and driver assistance capabilities,
including the following services:
• Driving Directions with Turn-by-Turn
Navigation
• OnStar Vehicle Diagnostic email
• Automatic Airbag Notification
• Automatic Advanced Crash
Notification
• Emergency Services
• Remote Door Unlock
• Stolen Vehicle Location Assistance
• Hands-Free Calling with 30 calling
minutes
• Roadside Assistance
• Fuel Station Location
• Information & Connections services
• Virtual Advisor, GPS-based Traffic &
Weather
For Remote Door Unlock or Stolen
Vehicle Location Assistance, call
1-888-4ONSTAR (1-888-466-7827).
Press the OnStar button to ask an
OnStar Advisor about the service plan
you have or to upgrade your plan. For
more information, refer to your OnStar
Owner’s Guide or visit onstar.com.
See Section 2 of your Owner Manual.
6
Getting to Know Your Envoy
Content Theft-Deterrent System
Arm the Content Theft-Deterrent
System
• Lock the doors using the power door
lock switch or by pressing the Lock
button on the Remote Keyless Entry
transmitter.
• After closing all doors, the security
light on the instrument panel cluster
stops flashing and remains lit. After a
delay of about 30 seconds, the lamp
darkens and the system arms itself.
• When arming with the power door
lock switch, at least one door must be
open and the key must be removed
from the ignition. (A door does not
have to be open to arm the system
with the Remote Keyless Entry
transmitter.)
• The system will not arm if the door is
locked with a key or the manual door
lock button is pressed.
• If the alarm is tripped, the horn
sounds and the headlamps/taillamps
flash for about two minutes. The
alarm sounds whenever a locked
door is opened without the key or
Remote Keyless Entry transmitter, or
if someone attempts to turn on the
ignition without the correct key.
Turn off the alarm
• Unlock a door with the key or press
Unlock on the Remote Keyless Entry
transmitter.
• Starting the engine with the correct
key will also turn off the alarm.
See Section 2 of your Owner Manual.
7
COMFORT
Manual Dual-Zone Climate
Controls (if equipped)
Select airflow source
• Turn the Mode knob on the right of
the climate control panel to the
desired setting:
( ) Instrument panel vents
( ) Instrument panel vents and
floor vents
( ) Floor vents
( ) Floor, windshield and side
window vents
(
) Windshield and side window
vents
Raise or lower fan speed
• Turn the fan control knob ( ) on the
left of the climate control panel.
Adjust the dual temperature controls
• Use the lever on the left-hand side of
the climate control panel to adjust the
temperature on the driver’s side of
the vehicle.
• Use the right-hand lever to adjust the
temperature on the front passenger’s
side of the vehicle and the temperature for the second row.
Cool the vehicle interior more quickly
on very hot days
• Open the windows just long enough
to let the hot air escape.
• Choose the coolest temperature
setting.
• Activate the Recirculate (
) and
A/C ( ) buttons.
• Place the Mode knob in the Vent ( )
mode.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the Recirculate (
) button.
This feature can be activated while in
the Vent or Bi-Level mode, but not in
Defog, Defrost or Floor mode.
Turn on the rear window defogger
• Press the rear window defogger
( ) button.
• The indicator light on the button will
come on to let you know the rear
window defogger is active.
See Section 3 of your Owner Manual.
8
Getting to Know Your Envoy
Automatic Dual-Zone Climate
Controls (if equipped)
Manually select desired airflow source
• Press and release the Mode ( )
button until the desired source is
indicated on the display. Mode selections include Vent, Bi-Level, Floor
and Defog.
Manually raise or lower fan speed
• Press the upper or lower portion of
the fan control (
) button.
Manually adjust the dual temperature
controls
• Use the knob on the left-hand side of
the climate control panel to adjust the
temperature on the driver’s side of
the vehicle. Use the right-hand knob
to adjust the temperature on the passenger’s side of the vehicle as well
as the second row.
• To match and link the passenger-side
temperature to the driver’s, press
and hold the AUTO button for three
seconds.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the Recirculate (
) button.
This feature can be activated while in
the Vent or Bi-Level mode, but not in
Defog, Defrost or Floor mode.
Clear the windshield and front side
windows of fog or frost more quickly
• Press the
button and adjust the
fan speed.
Clear the rear glass of fog or frost
more quickly, and activate the heated
outside rearview mirrors (if equipped)
• Press the
button.
• The indicator light on the button will
come on to let you know the rear
window defogger is active.
Automatic Operation
In the automatic mode, the system
will automatically control the inside
temperature, air delivery mode and
the fan speed to achieve your set
temperature as quickly as possible.
1. Press the AUTO button.
2. Set the driver’s and passenger’s
temperatures.
See Section 3 of your Owner Manual.
9
Rear Seat Climate Controls
(if equipped)
SLE model
SLT model
Turn the rear controls on and off
• Press the Power button. The rear
controls do not function when the front
climate control is in Defrost mode.
Change the direction of airflow
• Use the Mode knob (on SLE models)
or button (on SLT models) to select
Upper, Bi-Level or Floor.
Set the temperature of air through the
rear outlets
• Temperature of air from the rear
outlets is determined by the front
passenger temperature setting.
See Section 3 of your Owner Manual.
Electric Adjustable Pedals
Adjust the brake and accelerator
pedals to comfortable positions
• Press the switch located on the
steering column toward you to move
the pedals closer to you.
• Press the switch away from you to
move the pedals away from you.
Note: The pedals cannot be positioned
farther away from the driver than they
are in their standard position. This
feature can be programmed to work
with the memory function (if equipped)
on your vehicle. Adjustment of the
powered pedals requires that the
vehicle be in Park.
See Section 2 of your Owner Manual.
10
Getting to Know Your Envoy
Heated Front Seats (if equipped)
Select a heat setting for both the
seatback and seat cushion
• Press and release the button labeled
with the heated seat ( ) icon
located on the front door armrest
until the indicator lights designate
your setting: three for High, two for
Medium, one for Low and none
for Off.
Select a heat setting for the seatback
only
• Press and release the vertical heated
seatback ( ) button until the switch
indicates the desired setting: three for
High, two for Medium, one for Low
and none for Off.
The engine must be running to operate
this feature.
See Section 1 of your Owner Manual.
Memory Seats (if equipped)
Save driver seat preference memory
setting
1. Adjust the driver seat (including seatback recliner and lumbar) to a comfortable position.
2. Press and hold either the driver 1 or
driver 2 memory button located on
the driver’s door. A double chime will
sound to confirm your settings.
To program settings for a second driver,
repeat the same procedure using the
other numbered memory button.
See Section 2 of your Owner Manual.
11
ENTERTAINMENT
Audio Systems
Set the time
• Press the H or HR button until the
correct hour appears on the display.
• Press and hold the M or MIN button
until the correct minute appears on
the display.
The time may be set with the ignition on
or off.
Set the time with an FM station’s
Radio Data System (RDS) setting
(if equipped)
• Press and hold both HR and MN for
two seconds until UPDATED and the
clock symbol appear on the display.
• If the time is not available from the
station, NO UPDAT appears in the
display.
Program radio station presets
1. Turn the radio on.
2. Press the BAND button to select the
band (AM/FM1/FM2/XM1/XM2).
3. Use the seek or tune knob to tune in
the desired station.
4. Press AUTO EQ to select the
equalization that best suits the type
of station selected.
5. Press and hold one of the six
numbered pushbuttons until a beep
sounds; release the button.
6. Repeat these steps for each station
preset, using a different numbered
button for each station.
Display a station’s INFO message
when INFO appears on the display
• Press INFO to see the message.
Once the complete message has
been displayed, INFO disappears
from the display.
Tune to an RDS broadcast of a
selected program type
1. Press the TYPE button to select the
Program Type you want to listen to.
2. Press the or button.
Access one of the two available XM
Satellite Radio bands (if equipped)
• Press the BAND button until XM1 or
XM2 appears on the display.
See Section 3 of your Owner Manual.
Multiple-Disc CD Player
(if equipped)
Load one CD into the Six-Disc
CD Player
1. With the ignition on, press and
release the LOAD side of the LOAD
CD button.
2. Wait for the indicator light at the right
side of the slot to turn green.
3. Insert the disc partway into the slot,
label side up; the player will pull the
disc in.
12
Getting to Know Your Envoy
Load multiple CDs
1. With the ignition on, press and hold
the LOAD button for two seconds.
The unit beeps and the light to the
right of the slot begins to flash.
2. When the light stops flashing and
turns green, insert a disc partway,
label side up.
3. The indicator light will begin blinking
and then turn green. Load another
disc at this time.
4. When loading more than one but
fewer than six CDs, press the LOAD
button again to signal that loading is
complete.
When more than one disc is loaded,
a number for each disc is displayed.
5. To play a specific CD, press the CD
AUX button and then the number of
the CD you want to hear.
A small bar appears under the CD
number that is playing, and the track
number appears.
Note: CDs with any affixed labels may
jam in the CD player. Label a CD using
a permanent marker. If more than one
CD is inserted into the slot at one time,
or if scratched or damaged CDs are
played, the CD player could be damaged. When using the CD player, use
only CDs in good condition without
labels; load one CD at a time; and keep
the CD player and the loading slot free
of foreign materials, liquids or debris.
See Section 3 of your Owner Manual.
CONVENIENCE
Headlamp Controls
The exterior lamps knob is located on
the instrument panel, to the left of the
steering wheel.
Turn off the Daytime Running Lamps
(DRL) and automatic headlamp
system
• Move the knob to the Off ( )
position.
The automatic headlamp system automatically reactivates at the next key-on.
Activate the Daytime Running Lamps
(DRL) and automatic headlamp system
• Move the knob to the Auto (
)
position.
• The automatic headlamp system will
turn on all exterior lamps and the
instrument panel/radio lights when
they are needed during the day or
when the vehicle is shifted out of
Park at night.
13
Manually activate the parking lamps,
side-marker lamps, taillamps, instrument panel/radio lights and license
plate lamps
• Move the knob to the parking lamps
(
) position.
Manually activate the headlamps, all
exterior tail/marker lamps and the
instrument panel/radio lights
• Move the knob to the Headlamps
(
) position.
Activate the fog lamps
• Press the button (A below) located
on the instrument panel to the right of
the exterior lamps knob once.
Headlamp Washers
(if equipped)
A
Spray the headlamps with washer
fluid
• Press the headlamp washer button
(A above) located on the instrument
panel to the left of the steering wheel.
See Section 3 of your Owner Manual.
A
• An indicator lamp will illuminate.
• To turn them off, press the button
again.
See Section 3 of your Owner Manual.
14
Getting to Know Your Envoy
Interior Lamps
Your vehicle is equipped with illuminated
entry and exit lighting as well as dome
lamps.
Activate illuminated entry feature
• Open a door or press the Unlock
button on your Remote Keyless Entry
transmitter.
• With all doors closed, the dome
lamps stay illuminated briefly and turn
off automatically.
A
Disable entry and exit lighting
• Push in the Dome Lamp Override
button located below the exterior
lamps knob (A above). This will override the illuminated entry feature
unless the Remote Keyless Entry
transmitter is used to unlock the
vehicle. The Dome Lamp Override
feature is useful when the vehicle
doors need to be open for a long
period of time.
See Section 3 of your Owner Manual.
Heated, Power Outside Mirrors
(if equipped)
Activate heat feature on the power
outside mirrors
• Press the rear window defogger
button on the climate control panel.
See Section 2 of your Owner Manual.
Universal Home Remote
(if equipped)
The Universal Home Remote is a combined universal transmitter and receiver
that can activate up to three devices,
such as garage door openers, entry
door locks, gates and security systems.
It’s recommended that you read the
instructions in your Owner Manual completely before attempting to program any
of the three channels on the Universal
Home Remote. The engine should be
turned off when programming the
remote.
Note: Do not use the Universal Home
Remote with any garage door opener
that does not have the “stop and
reverse” feature or any opener manufactured before April 1, 1982.
See Section 2 of your Owner Manual.
15
Sun Visors
Block glare
• To help block the sun’s glare, rotate
the sun visor down.
• Block the driver or passenger frontside window glare by turning the sun
visor to the side window.
• Pull out the sun visor extender (if
equipped) for additional window
coverage.
See Section 2 of your Owner Manual.
Luggage Carrier (if equipped)
Slide the crossrails to desired
position
1. Pull up the lever on each side of the
crossrail. This will release the crossrail and allow you to slide it.
2. When the crossrail is where you want
it, press down on the levers to lock it
in place.
Reduce wind noise when the roof
luggage carrier is not in use
• Position the rear crossrail at the
rearmost position and the front
crossrail above the rearmost portion
of the rear door opening (above the
C-pillar).
Note: Never carry anything on the vehicle roof that is longer or wider than the
luggage carrier itself. (Examples: plywood, paneling, a mattress.) The load
could be violently torn off, causing you
or others to have a collision.
Loading cargo that weighs more than
220 pounds (100 kg) on the luggage
carrier may damage your vehicle.
See Section 2 of your Owner Manual.
16
Getting to Know Your Envoy
Air Inflator System (if equipped)
Locate the air
inflator unit and kit
The inflator unit is in
the rear compartment on the passenger side of the
vehicle, behind an
access cover.
An inflator kit, with a
22-foot hose and three nozzle adapters,
may be located in the glove box.
Use the air inflator
1. Open the access cover.
2. Attach the appropriate nozzle adapter
to the end of the hose (if required).
3. Attach that end of the hose to the
object you are inflating. Attach the
other end of the hose to the inflator
outlet.
4. Press and release the on/off switch
to turn the air inflator on. An indicator
light verifies that the inflator is
running.
5. When inflation is complete, press and
release the on/off switch again.
6. Remove the hose from the outlet
(load leveling will not operate when
the hose is attached to the outlet).
See Section 5 of your Owner Manual.
PERFORMANCE & MAINTENANCE
Malfunction Indicator Lamp
(Service Engine Soon Lamp)
This instrument panel cluster lamp
illuminates under a variety of conditions
when the On-Board Diagnostics II (OBD
II) system detects a malfunction in the
vehicle’s emission controls.
If the Malfunction Indicator Lamp
is lit steadily, check the gas cap to
ensure it is present and securely
fastened
• Turn the cap clockwise until a ratcheting sound is heard, signaling that it
is secure.
• If this is the cause of the condition, a
few driving trips with the cap installed
properly should turn the light off.
See Section 3 of your Owner Manual.
Electronically Controlled
Air Suspension (if equipped)
Occasional whirring and/or hissing
sound under the rear of the vehicle
• This sound indicates that the system’s air compressor is operating to
provide a level ride height, and is
normal.
See Section 4 of your Owner Manual.
17
Four-Wheel Drive (if equipped)
Envoy’s fourwheel drive
system rotary
controls are
located on the
instrument panel.
Shift into 4s
(4-high) or AUTO
• Turn the knob to 4s or AUTO.
This can be done at any speed
except when shifting from 4t
(4-low).
Shift into 2s(2-high)
• Turn the knob to 2s. This can be
done at any speed except when
shifting from 4t.
Shift into or out of 4t
• With the ignition in Run and the
vehicle stopped or moving less than
3 mph (4.8 km/h), shift the transmission into Neutral.
• Turn the knob to 4t, 2s, 4s or
AUTO, preferably with the vehicle
moving 1 to 2 mph (1.6 to 3.2 km/h).
• Wait for the indicator lamp to stop
flashing and remain illuminated; then
shift your transmission into gear.
Shift into Neutral (N)
• Place the transfer case in Neutral
only when towing your vehicle. See
Section 4 of your Owner Manual for
towing information.
See Sections 2, 4 and 5 of your Owner Manual.
StabiliTrak ® – Stability Control
System
StabiliTrak combines antilock brake,
traction control, and stability control systems that help the driver maintain directional control of the vehicle in most driving conditions. The system is designed
to help keep the vehicle on the driver’s
intended path by using throttle and
brake intervention.
When activated, the system will apply
braking to individual wheels and may
reduce engine power as necessary to
help you maintain directional control of
the vehicle. You may also hear a noise
or vibration, or feel a reduction in acceleration, while the system is active. This
is normal.
StabiliTrak is automatically turned on
when the vehicle is started and does
not require any driver input. It is recommended to leave the system on at all
times for normal driving. It may be
necessary to turn off the traction control
portion of the system if the vehicle is
stuck in sand, mud or snow.
To turn off the traction control portion
of StabiliTrak, press and release the
(StabiliTrak) button located on the
transmission shift lever. TRACTION
CONTROL OFF will be displayed on
the Driver Information Center (DIC).
Press the button again to turn the
system back on.
To turn off StabiliTrak, which includes
traction control and stability control
functions, press and hold the
(StabiliTrak) button for five seconds.
STABILITRAK OFF will be displayed on
the DIC. Press the button again to turn
the system back on.
See Section 4 of your Owner Manual.
18
Getting to Know Your Envoy
Tire Pressure Monitor
The Tire Pressure Monitor alerts you
when a significant reduction in pressure
occurs in one or more of your vehicle’s
tires by illuminating the (Low Tire
Pressure) warning light on the instrument panel cluster. The low tire pressure
warning light will remain on until you
correct the tire pressure. A CHECK TIRE
PRESSURE message will also appear
on the DIC.
Correcting the Tire Pressure
When the low tire pressure warning light
illuminates, you must fill the tire to the
proper inflation pressure (just as you
must refuel the vehicle when the low
fuel warning light illuminates). The Tire
and Loading Information label shows the
correct inflation pressure for the tires
when they’re cold. “Cold” means your
vehicle has been sitting for at least three
hours or driven no more than one mile.
You can temporarily clear the DIC
message by acknowledging it with your
DIC controls. However, at the next
vehicle start-up, the DIC message will
reappear if the tire pressure has not
been corrected.
During cooler conditions, the low tire
pressure warning light may appear when
the vehicle is first started and then turn
off as you start to drive the vehicle. This
could be an early indicator that your tire
pressures are getting low and need to
be inflated to the proper pressure.
Note: The Tire Pressure Monitor can
alert you about low tire pressure, but it
doesn’t replace normal monthly tire
maintenance.
See Section 5 of your Owner Manual.
19
Notes
20
Getting to Know Your Envoy
OWNER INFORMATION
Roadside Assistance
1-800-GMC-8782 (1-800-462-8782)
TTY Users: 1-888-889-2438
As the proud owner of a new GMC vehicle,
you are automatically enrolled in the GMC
Roadside Assistance program. This valueadded service is intended to provide you
with peace of mind as you drive in the city
or travel the open road.
GMC’s Roadside Assistance toll-free
number is staffed by a team of technically
trained advisors, who are available 24
hours a day, 365 days a year. The advisors
can provide minor repair information or
make arrangements to tow your vehicle
to the nearest GMC dealer.
GMC will provide the following services
for 5 years/100,000 miles at no expense
to you:
• Fuel delivery
• Lockout service (identification required)
• Tow to nearest dealership for warranty
service
• Flat tire assistance
• Jump starts
In many instances, mechanical failures
are covered under GMC’s comprehensive
warranty. However, when other services
are utilized, our advisors will explain any
payment obligations you might incur.
For prompt and efficient assistance when
calling, please provide the following information to the advisor:
• Location of the vehicle
• Telephone number and your location
• Vehicle model, year and color
• Vehicle mileage
• Vehicle Identification Number (VIN)
• Vehicle license plate number
GMC reserves the right to limit services
or reimbursement to an owner or driver
when, in GMC’s judgment, the claims
become excessive in frequency or type
of occurrence.
Roadside Assistance and OnStar®
(if equipped)
If you have a current OnStar subscription,
press the OnStar button and the vehicle
will send your current GPS location to an
OnStar Advisor who will speak to you,
assess your problem, contact Roadside
Assistance and relay your exact location
so you will get the help you need.
My GMLink
The GMC Owner Center at My GMLink is
a complimentary service for GMC owners,
a one-stop resource to enhance your GMC
ownership experience. Exclusive member
benefits include online service reminders,
vehicle maintenance tips, online owner
manual, special privileges and more. Sign
up today at www.mygmlink.com.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner
Manual for complete instructions. All information contained herein is based on information available at the
time of printing and is subject to change without notice. Copyright 2007 by GM Corp. All rights reserved.
15913283 A
!15913283=A!

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement