Unbranded NE1217 52 in. A-Frame Ladder Installation instructions

NE1217

52” Ladder with Safety Barrier and

Removable Outside Steps

Installation Instructions

Inside Pool –

Barrier against wall

.

Outside Pool –

Safety Steps in place.

Page 1 of 8

– Blue Wave Products – NE1217 20160525B

Outside Pool – Safety

Steps

REMOVED.

Blue Wave NE1217 Pool Ladder with Barrier Parts List

Item No. Part No. Qty. Description

14

15

16

17

18

19

8

9

10

11

12

13

1

4

5

2

3

6

7

NEP2601 2 Platform Handrail

NEP2602 1 Platform

NEP2603 20 Support Compression Collar

NEP2604 20 Support Compression Clip

NEP2605 2 Outside Support Rail

NEP2606 2 Outside Removable Step Rail

NEP2607 8 Bushing, Outside Removable Step Rail

NEP2608 8 Step Tread

NEP2609 4 Safety Clip

NEP2610 1 Safety Barrier Outer Half

NEP2611 1 Safety Barrier Base

NEP2612 1 Bottom Step, Outer

NEP2613 8 Anti-Skid Plugs

NEP2614 1 Safety Barrier Upper Support

NEP2615 1 Safety Barrier Inner Half

NEP2616 2 Inside Support Rail

NEP2617 1 Bottom Step, Inner

NEP2618 2 Inside Step Base Pad

NEP2619 1 Hardware Pack (Screws, Washers, Nuts)

Page 2 of 8

– Blue Wave Products – NE1217 20160525B

Important

:



Read these Assembly and Use instructions carefully.



Do not use the ladder for any other purpose - it is only for use with an above ground pool.



Maximum authorized weight: 330lbs (150 kg.)



To help prevent unauthorized entry to the pool, remove the Safety Steps when not in use (see cover illustrations).



Check the condition of the ladder components before assembly, before and during each use.



In winter, we recommend removing, cleaning, and drying the ladder to keep it in working condition.



Failure to comply with maintenance rules may pose a serious risk to health.



Do not swim around or behind the ladder.



Only one person at a time should climb up the ladder.



Do not dive or jump from the ladder.



Do not sit on the ladder.



Do not bounce or jump on the ladder.



Do not allow children to use the ladder unless under close competent supervision.



Place the ladder on solid, level ground.



Position the provided safety sticker on a step of the ladder so that it is clearly visible.



Keep these instructions for information and future reference.

This ladder is easy to install and can be assembled by one adult in about 1 HOUR.

The following tools are needed:



Medium Flat head screwdriver



10mm Wrench or Socket

Page 3 of 8

– Blue Wave Products – NE1217 20160525B

ASSEMBLY DETAILS

Refer back to these during assembly, as instructed.

ASSEMBLY DETAIL A – Detail Diagrams of Step/Platform installation

ASSEMBLY DETAIL B – Detail Diagrams of Bushing installation

ASSEMBLY DETAIL C – Detail Diagram of Bridge

Handrail assembly.

ASSEMBLY DETAIL D – Assembly of Safety Clips to the Handrail

Page 4 of 8

– Blue Wave Products – NE1217 20160525B

Step 1: Install the Inside Steps

Follow ASSEMBLY DETAIL A to install the first step through the fourth step of inner ladder.

Note: The end with the White Plug should face UPWARD.

Step 2: Install the Removable Safety Steps

① ②

③

④

Follow ASSEMBLY DETAIL A to install the Steps and then Follow ASSEMBLY DETAIL B to install two bushings on as shown in sub-steps ① through ④, above. For easier installation, remove the White Plugs first and when the bushings are installed, re-install the white plug.

Note: The end with White Plug should face UPWARD.

Page 5 of 8 – Blue Wave Products – NE1217 20160525B

Step 3: Assemble the Platform

Follow ASSEMBLY DETAIL A to install the platform to the connection bridge.

Step 4: Ladder Structure Assembly

Inside Pool Step

Outside Pool Step

① Lay the platform, inner ladder, and outside handrail on the ground. Follow the above illustration to connect handrails. Refer to ASSEMBLY DETAIL C for screw and washer order. After this step, the ladder should be in an “A” shape, as shown.

②

Insert 4 anti-slip plugs under inside and outside base steps as shown above.

Page 6 of 8

– Blue Wave Products – NE1217 20160525B

③

Assemble the Barrier as shown.

Inside Pool Step

④

Connect the Bottom

Step and Barrier using screws, as shown.

⑤

Stand the ladder up as shown, insert and connect the bottom steps, making sure to assemble the Inside and

Outside bottom steps in the proper locations.

Connect the Barrier to the

Inside Tread as shown.

Inside Pool Steps Outside Pool Steps

⑥

Following ASSEMBLY DETAIL D, assemble the four (4) Safety Clips on the outside part of the ladder frame, as shown.

Page 7 of 8

– Blue Wave Products – NE1217 20160525B

Step 5: Install Removable Safety Steps

① Insert the removable Safety Steps into the holes in the Bottom Outside Step. Tilt the

Removable Safety Steps up, aligned with the

Outside Rails.

②

Clip the Removable Safety Steps into the Safety Clips as shown to finish the installation.

Blue Wave Products, Inc.

1745 Wallace Ave

St. Charles, IL 60174

TOLL-FREE CUSTOMER SUPPORT:

(800) 759-0977

E- MAIL:

[email protected]

MADE IN CHINA

Copyright © 2016, Blue Wave Products, Inc.

Saint Charles, IL 60174

All Rights Reserved

Page 8 of 8

– Blue Wave Products – NE1217 20160525B