Philips BT5580B User manual
Add to my manuals16 Pages
Philips BT5580B allows you to enjoy your favorite music and charge your mobile devices. Connect your devices using Bluetooth or plug an audio cable into the AUX input. Control music playback and answer or reject phone calls with the speaker's intuitive controls. Its powerful speakers deliver high-quality sound, and the built-in rechargeable battery provides up to 10 hours of playtime.
advertisement
Always there to help you
Register your product and get support at www.philips.com/welcome
Contact
Philips
BT5580
BT5880
User manual
Contents
Contents
1 Important
2 Your Bluetooth speaker
3 Get started
4 Use Bluetooth devices
Disconnect the Bluetooth-enabled device 7
Connect another Bluetooth-enabled
5 Other features
6 Product information
7 Troubleshooting
8 Notice
EN 1
1 Important
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical equipment.
• Keep this speaker away from direct sunlight, naked flames or heat.
• Make sure that there is enough free space around the speaker for ventilation.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Use only power supplies listed in the user manual.
• The speaker shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the speaker (e.g. liquid filled objects, lighted candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
Note
• The type plate is located on the bottom of the product.
2 EN
2 Your Bluetooth speaker
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Introduction
With this speaker, you can
• enjoy audio from your Bluetooth-enabled devices or other external audio devices; and
• charge mobile devices through the micro
USB socket.
What's in the box
Check and identify the contents of your package:
• Main unit
• AC/DC adaptor
• Short user manual
• Safety and notice leaflet
Short User Manual
Always there to help you
Register your product and get support at www.philips.com/welcome
Question?
Philips
EN 3
4 EN a b a
Overview of the speaker
• Turn the speaker on or off.
b PAIRING
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth connection. c DC IN
• Connect power.
d AUDIO IN
• Connect an external audio device.
e CHARGING
• Charge mobile devices in AC mode. f Volume knob
• Adjust volume.
g
• Answer or reject an incoming call.
• End the current phone call.
• Transfer the call to your mobile device.
h NFC
• Connect a device with NFC feature through Bluetooth.
h g f e d c
3 Get started
Always follow the instructions in this chapter in sequence.
Power supply
Either AC power or battery can be used as power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in rechargeable battery.
Note
• Rechargeable battery has a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
• When battery is low, the LED indicator flashes red.
To recharge the built-in battery:
• Connect the speaker to AC power supply.
Option 2: AC power
Caution
• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the speaker.
• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.
Connect the power adaptor to:
• the DC IN socket on the speaker.
• the wall outlet.
Turn on
DC IN
Press .
» The speaker switches to Bluetooth mode.
» The LED indicator flashes blue.
Note
• If battery is low, the LED indicator flashes red.
Turn off
The speaker is turned off in the following situations:
• Press again;
• The connection with Bluetooth device or other device is invalid for 15 minutes; or
• Music playback is stopped for 15 minutes.
Working mode
LED status
Off mode Flashing red while charging; Turned off after fully charged.
Bluetooth mode
Audio-in mode
Flashing blue while connecting or waiting for pairing; Solid blue after connected.
No LED indication
EN 5
6 EN
4 Use Bluetooth devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the incoming call through Bluetooth.
Connect a device
Note
• Make sure that your Bluetooth device is compatible with this speaker.
• Before pairing a device with this speaker, read its user manual for Bluetooth compatibility.
• The speaker can memorize a maximum of 4 paired devices.
• Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other
Bluetooth devices.
• Any obstacle between this speaker and a Bluetooth device can reduce the operational range.
• Keep away from any other electronic device that may cause interference.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a technology that enables short-range wireless communication between various NFC compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can connect it with this speaker easily.
1
On your device, enable NFC and
Bluetooth functions (refer to the user manual of the device).
2
Press on this speaker.
» The LED indicator flashes blue.
3
Tap the NFC tag on the top of the speaker with the back of your Bluetooth device.
4
Follow the on-screen instructions to complete the pairing and connection.
» After successful pairing and connection, the speaker beeps twice, and the LED indicator turns solid blue.
Option 2: Connect a device manually
Note
• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
Press .
» The LED indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device).
3
When [Philips BT5580] or [Philips
BT5880] is displayed on your device, select it to start pairing and connection.
If necessary, input “0000” as the pairing password.
» After successful pairing and connection, the speaker beeps twice, and the LED indicator turns solid blue.
Play from Bluetooth device
Note
• If there is an incoming call on the connected mobile phone, music play pauses.
After successful Bluetooth connection, play audio on the Bluetooth device.
» Audio streams from your Bluetooth device to the speaker.
Control your phone call
After Bluetooth connection, you can control an incoming call with this speaker.
Button Function
Press to answer an incoming call.
Press and hold to reject an incoming call.
During a call, press to end the current call.
During a call, press and hold to transfer the call to your mobile device.
Connect another Bluetoothenabled device
Disable Bluetooth on the current device, and then connect another device.
Disconnect the Bluetoothenabled device
• Press and hold PAIRING for two seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the communication range.
Enter Bluetooth pairing mode
Press and hold PAIRING for two seconds.
EN 7
8 EN
5 Other features
Listen to an external device
With this speaker, you can also listen to an external audio device such as an MP3 player.
1
Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to
• the AUDIO IN socket on this speaker, and
• the headphone socket on the external device.
» The speaker switches to audio-in mode automatically.
2
Play audio on the external device (refer to its user manual).
Charge your mobile devices
You can charge your mobile devices through the CHARGING socket.
Note
• The USB socket is for charging only.
• In AC power supply mode, connect to your mobile device with a USB cable (not supplied).
» Once the device is recognized, the charging starts.
Adjust volume
CHARGING
Rotate the volume knob to increase or decrease the volume.
6 Product information
Note
• Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output
Power
Signal to Noise
Ratio
AUX Input
Bluetooth
Bluetooth Version
Supported Profiles
Range
10W RMS (BT5580);
12W RMS (BT5880)
> 62 dBA
600 mV
V4.0
HFP, A2DP, AVRCP
10 m (Free space)
General information
Power Supply
- AC Power
(power adapter)
Brand name: PHILIPS;
Model: OH-
1024A1202000U-VDE;
Input: 100-240 V~, 50/60 Hz,
650 mA
Output: 12 V 2 A
Li-ion battery (2200 mAh)
5 V 1 A
- Battery
Charging
Voltage and
Current
Operation
Power
Consumption
Dimensions -
Main Unit
(W x H x D)
Weight - Main
Unit
AC 24 W
210 x 201 x 55 mm
1.4 kg
EN 9
7 Troubleshooting
Warning
• Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
General
No power
• Make sure that the AC power plug of the unit is connected properly.
• Make sure that there is power at the AC outlet.
• Recharge your speaker.
No sound or poor sound
• Adjust volume on the product.
• Adjust volume on the connected device.
No response from the speaker
• Restart the speaker.
Cannot charge mobile devices
• Make sure that AC power is connected properly.
• Make sure that there is power at the AC outlet.
About Bluetooth device
The audio quality is poor after connection with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.
Cannot connect with the device.
• The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.
• This product is already connected with another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects constantly.
• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.
• For some devices, Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this product.
10 EN
8 Notice
Any changes or modifications made to this device that are not expressly approved by
WOOX Innovations may void the user’s authority to operate the equipment.
Compliance
1177
Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/ support.
Care of the environment
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
Caution
• Removal of the built-in battery invalidates the warranty and may destroy the product.
Always bring your product to a professional to remove the built-in battery.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
EN 11
Trademark notice
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.
This is CLASS II apparatus with double insulation, and no protective earth provided.
12 EN
EN 13
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
BT5580_BT5880_12_UM_V1.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 What's in the box
- 6 Overview of the speaker
- 7 Power supply
- 7 Option 1: Battery power
- 7 Option 2: AC power
- 7 Turn on
- 7 Turn off
- 8 Connect a device
- 8 Option 1: Connect a device through NFC
- 8 Option 2: Connect a device manually
- 9 Play from Bluetooth device
- 9 Control your phone call
- 9 Disconnect the Bluetooth-enabled device
- 9 Enter Bluetooth pairing mode
- 9 Connect another Bluetooth-enabled device
- 10 Listen to an external device
- 10 Charge your mobile devices
- 10 Adjust volume
- 11 Specifications
- 11 Amplifier
- 11 Bluetooth
- 11 General information
- 12 General
- 12 About Bluetooth device
- 13 Compliance
- 13 Care of the environment
- 14 Trademark notice