Liebherr | FKvsl 5410 Premium | Operating instructions | Liebherr FKvsl 5410 Premium

Liebherr FKvsl 5410 Premium
Operating instructions
Refrigerator
Read the operating instructions before switching on for the first time
Page 8
GB
7080 031-01
FKv
Disposal notes
Range of appliance use
The appliance contains reusable materials and should
be disposed of properly - not simply with unsorted
household refuse. Appliances which are no longer
needed must be disposed of in a professional and
appropriate way, in accordance with the current local
regulations and laws.
The appliance is suitable solely for cooling food in
a domestic environment or similar. This includes,
for example, use
When disposing of the appliance, ensure that the refrigerant circuit
is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
• Disable the appliance.
• Pull out the mains plug.
• Cut through the connection cable.
WARNING
Danger of suffocation due to packing material
and plastic film!
Do not allow children to play with packaging
material.
Take the packaging material to an official collection point.
-in staff kitchenettes, bed and breakfast establishments,
-by guests in cottages, hotels, motels and other
forms of accommodation,
-in catering and similar services in the wholesale
trade.
Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible.
The appliance is not suitable for storing and cooling medicines,
blood plasma, laboratory preparations or similar substances and
products covered by the 2007/47/EC Medical Devices Directive.
Any misuse of the appliance may result in damage to or spoilage
of stored goods.
Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.
Description of the appliance
FKv 2610, FKv 3610
FKv 4110, FKv 5410
FKv 2612, FKv 3612
FKv 4112, FKv 5412
Temperature control
Interior light switch
Interior light (fluorescent tube)
Type plate
Grid shelves
Important
FKv 2610, FKv 2612
FKv 3610, FKv 3612
FKv 4110, FKv 4112
The maximum load per grid shelf is 45 kg.
FKv 5410, FKv 5412
The maximum load per grid shelf is 60 kg.
Adjustable-height feet
8
Safety instructions and warnings
•To prevent injury or damage to the unit, the appliance should be unpacked and set up by two
people.
•In the event that the appliance is damaged on
delivery, contact the supplier immediately before
connecting to the mains.
•To guarantee safe operation, ensure that the appliance is set up and connected as described in
these operating instructions.
•Disconnect the appliance from the mains if any
fault occurs. Pull out the plug, switch off or remove
the fuse.
•When disconnecting the appliance, pull on the
plug, not on the cable.
•Any repairs and work on the appliance should
only be carried out by the customer service
department, as unauthorised work could prove
highly dangerous for the user. The same applies
to changing the mains power cable.
•Do not allow naked flames or ignition sources
to enter the appliance. When transporting and
cleaning the appliance, ensure that the refrigerant
circuit is not damaged. In the event of damage,
make sure that there are no ignition sources
nearby and keep the room well ventilated.
•Do not stand on the plinth, drawers or doors or
use them to support anything else.
•This appliance can be used by children of 8 years
old and over, and also by persons with restricted
physical, sensory or mental capacity or lack of
experience and knowledge, if they are supervised
or have been instructed on safe use of the appliance and understand the resulting risks. Children
must not be allowed to play with the appliance.
Cleaning and user maintenance must not be
carried out by children without supervision.
•Avoid prolonged skin contact with cold surfaces
or chilled/frozen food. This could cause pain,
numbness and frostbite. In the case of prolonged
skin contact, protective measures should be
taken, e.g. gloves should be worn.
•Do not consume food which has been stored for
too long, as it could cause food poisoning.
GB
•Do not store explosives or sprays using combustible propellants such as butane, propane,
pentane, etc. in the appliance. Electrical components might cause leaking gas to ignite. You
may identify such sprays by the printed contents
or a flame symbol.
•Do not use electrical appliances inside the appliance.
•If you have a lockable appliance, do not keep the
key near the appliance or within reach of children.
•The appliance is designed for use in enclosed
areas. Do not operate the appliance outdoors or
in areas where it is exposed to splash water or
damp conditions.
•When transporting or operating the appliance at
an altitude of more than 1500 m above sea level,
the glass pane in the door can break due to the
reduction in air pressure. Broken fragments are
sharp-edged and can cause serious injury.
FKv 2612, FKv 3612, FKv 4112, FKv 5412
The fluorescent tube illuminates the interior of the
appliance. It is not suitable for lighting a room.
Climate rating
The climate rating indicates the room
temperature at which the appliance may
be operated in order to achieve full refrigeration performance.
The climate rating is indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Climate rating
4 (SN)
4 (N)
4+ (ST)
4+ (SN-ST)
5 (T)
5 (SN-T)
Room temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+10°C to +38°C
+16°C to +43°C
+10°C to +43°C
Do not operate the appliance outside the
specified room temperature range.
Noise emissions from the appliance
The noise level while the appliance is operating is below 70 dB(A)
(relative noise level 1 pW).
9
Setting up
• Do not place the appliance in direct sunlight or near cookers,
radiators and similar sources of heat.
• The floor on which the appliance stands should be horizontal
and level. Compensate for uneven floors with the adjustable
feet.
Switching the appliance on and off
You are recommended to clean the interior of the appliance before
switching it on for the first time (see Cleaning).
Switching the appliance on
Connect the appliance to the mains - the appliance is switched on.
• Do not cover ventilation openings or
grille.
Switching the appliance off
• Standard EN 378 specifies that the room in
which you install your appliance must have a
volume of 1 m3 per 8 g of R 600a refrigerant used
in the appliance, so as to avoid the formation
of inflammable gas/air mixtures in the room
where the appliance is located in the event of
a leak in the refrigerant circuit. The quantity of
refrigerant used in your appliance is indicated
on the type plate on the inside of the appliance.
Pull out the mains plug or set the
temperature control to 0.
Important
When the temperature control is turned to "0", the refrigeration system is switched off, but the appliance is not
completely disconnected from the mains.
• Always install the appliance directly against the wall.
Before cleaning, always disconnect the appliance from the
mains. Remove the plug.
Appliance dimensions
Setting the temperature
Set the temperature inside the appliance using the temperature control.
The nearer the temperature control
is to the max. setting, the colder the
interior temperature.
Set the control between "0" and "max."
as required.
A
B
C
D
E
FKv 26.. 1250 mm 600 mm 610 mm
650 mm 1180 mm
FKv 36.. 1640 mm 600 mm 610 mm
650 mm 1180 mm
FKv 41.. 1800 mm 600 mm 610 mm
650 mm 1180 mm
FKv 54.. 1640 mm 750 mm 730 mm
850 mm 1410 mm
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appliance and must be easily accessible.
Do not connect the appliance using an extension cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating current/threephase current) or energy-saving plugs. Risk
of damage to the electronic control system!
10
Temperature display
The thermometer is located in the upper part of
the door.
The temperature display
is powered by a battery
which is available from your
specialist dealer.
Changing the battery
• Open the door.
• Detach cover A.
• Pull out thermometer T.
• Open the battery compartment using a
small screwdriver.
• Replace the battery.
• Close the battery compartment.
• Re-install all parts.
If Er or HH appears in the display, the appliance has a fault.
Consult the customer serv­ice department indicating the fault
number displayed.
Cooling
The grid shelves can be moved
to accommodate different height
bottles or packages.
The ventilation slots on the
inside must not be covered!
Defrosting
GB
The refrigerator compartment defrosts automatically.
When operating at a very cold thermostat setting, the interior
rear wall may ice up.
In this case, the appliance must be defrosted manually.
• Pull
out the mains plug!
• Remove the food from the appliance and store in a cool place.
Interior light
• Leave the door of the appliance open while defrosting. After
defrosting mop up the remaining water and clean the appliance.
The interior light is fitted on the inside
at the top.
Do not use any mechanical devices or other
artificial aids for defrosting other than those
recommended by the manufactur­er.
FK 2612, FK 3612, FK 4112, FK 5412
It can be switched on and off by pressing the switch Light.
Replacing the fluorescent tube
• Pull
out the mains plug!
• Undo the screw on the back of
the light cover.
• Detach the cover at the back
and remove.
• Change the fluorescent tube.
• Insert the cover at the front and
click into place at the back.
• Screw the screw into the cover.
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Cleaning
Clean the appliance at least twice per year.
Before cleaning, always switch off the appliance. Disconnect
from the mains or switch off or unscrew the fuse.
• Clean the inside, equipment and outer walls with lukewarm
water and a little detergent. Do not use chemical solvents or
any cleaning agents containing sand or acid.
• Ensure that no cleaning water penetrates into the elec­trical
components or ventilation grille.
• The dust should be removed from the refrigeration unit and
heat exchanger - metal grid at the back of the appliance - once
a year.
• Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
Do not use steam cleaners because of the
risk of injury and damage.
Locking the appliance
• Insert the key as shown by arrow 1.
• Turn the key 90°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
11
Malfunctions
You may be able to rectify the following faults by checking
the possible causes yourself:
Changing over door hinges
Door hinges should only be changed by a trained expert.
Changing the door hinges must be done by two people.
• Appliance does not function:
–Is the appliance switched on?
–Is the plug correctly fitted in the mains socket?
–Is the fuse intact?
1.
• Loud running noise:
–Is the appliance set up firmly on the floor?
–Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
• The temperature is not low enough:
–Is the temperature setting correct (see Setting the temperature)?
–Have excessive amounts of fresh food been placed in the appliance?
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service department stating the type of appliance 1, service number 2
and appliance number 3 as
indicated on the type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Shutting your appliance down
1.Pull out the circlip from the lower hinge
bracket.
2.Remove cover plate.
3.
Important
As a result of its heavy weight, the door must
be held secure by one person.
3.Unscrew the hinge pin from the upper hinge
bracket.
Remove the door.
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
4.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The permissible room temperature for storing the appliance
after decommissioning is between -10°C and +50°C.
2.
4.Transfer clamping plate.
Storing the appliance outside this temperature range can
damage the appliance and cause it to malfunction.
The appliance complies with the relevant safety regulations and
EC directives 2004/108/EC and 2006/95/EC.
5.Transfer hinge components
and cover plates to the opposite side.
12
5.
GB
6.Transfer lower hinge bracket and
cover plate to the opposite side.
6.
11.
11. Place the door on the lower hinge
bracket.
7.
7.Transfer lock and cover plates
to the opposite side of the
door.
12.
7.
12.Screw in the hinge pin.
Align the door at the side and tighten
the hinge pin.
Replace cover plate.
8.Transfer handle and plugs to
the opposite side of the door.
8.
13.Tighten the torque rod with the open-ended
spanner provided. > 60°
13.
9.
10.
9. Pull out the torque rod from the
right-hand door mounting. The rod
is approx. 1130 mm long.
10.Turn the torque rod through 180°
horizontally and insert into the lefthand door mounting.
The hexagon of the torque rod will lock
into the lower hinge bracket.
14.Fit the circlip on the lower hinge
bracket.
14.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising