Tower Speaker with Bluetooth

PHITB65BK

Please read this Instruction Manual carefully before connecting or operating the unit and retain this booklet for future reference.

Table of Content

TABLE OF CONTENT.....................................................................................................1

IMPORTANT INSTRUCTIONS...................................................................................2~3

IMPORTANT NOTES......................................................................................................4

PRODUCT FEATURE.....................................................................................................5

PREPARATION FOR USE..............................................................................................5

LOCATION OF CONTROL..............................................................................................6

REMOTE CONTROL …………………………………………………………………………7

BATTERY INSTALLING AND REPLACING REMOTE CONTROL ..........................7~8

INSTALLATION...............................................................................................................8

OPERATION THE UNIT.............................................................................................9-14

CARE AND MAINTENANCE.........................................................................................15

TROUBLE SHOOTING GUIDE.....................................................................................15

SPECIFICATION...........................................................................................................16

1

IMPORTANT INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

READ ALL INSTRUCTIONS BEFORE USE

Always follow basic safety precautions when using electrical products, especially when children are present.

Congratulations on your purchase of Tower Speaker System. To get the most from your speaker system, please take a few minutes to read these instructions.

WARNING - To reduce the risk of fire, electric shock or serious personal injury, do not open the unit. This product is intended for indoor, nonindustrial, non-commercial use; do not use the product outdoor.

Do not mount this product on a wall or ceiling.

1. Always follow basic safety precautions when using electrical products. Children should be supervised to ensure that they do not play with appliances.

2. Do not allow children to operate the unit without adult supervision.

2

3. Read this instruction manual carefully before you attempt to use the unit.

4. Consult your dealer or service personnel if you have further questions about the operation or safety of the unit.

5. Do not expose the product to temperatures above 40°C. Keep it in moderate climates.

6. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed near the product. Dry location use only.

7. No naked flame sources, such as candles, should be placed on the product.

8. Keep the power cord and product away from heated surfaces.

9. Keep at least 5 cm of space around the unit for sufficient ventilation.

10. The ventilation holes should not be blocked by things such as newspapers, dusters, curtains, etc. Place the product where there is good ventilation.

11. Do not place or drop the product into water or other liquids. If the product falls into water, immediately unplug it from the electrical outlet; do not pull on the power cord.

12. Do not plug or unplug the AC cord in wet hands.

13. Do not place the unit near TV, speakers, and other objects that generate strong magnetic fields.

14. Do not clean the unit with strong chemical agents.

15. This product has no user-serviceable parts. Do not attempt to dismantle or repair this unit by yourself. This unit should be repaired by qualified service technician only.

16. Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off. Unplug it from the power source. And consult service personnel.

17. Do not remove any fixed cover. This will increase the risk of electrical shock.

18. Press the buttons gently. Pressing them too hard can damage the speaker.

19. Do not push any objects into holes, slots, or openings on the unit. This could result in fatal electric shock.

20. Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product and loss of data.

21. Care is required for the use of this apparatus in tropical and/ or moderate climates.

22. Do not use the appliance in an extremely dry environment, as this can lead to static discharge, which can damage the player.

23. Only use attachments/accessories specified with this unit.

24. Unplug this apparatus during lightning storms or when it is unused for long periods of time.

3

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IMPORTANT NOTES





Avoid installing the unit in locations described below:



Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

Dusty, humid or moist places.

Places subject to constant vibration.

ATTENTION

THE UNIT WILL AUTO TURN TO STANDBY MODE WHEN SPEAKER RECIEVES NO

SIGNAL OUTPUT AFTER 15 MINUTES TO SAVE ENERGY.

PRODUCT FEATURES

This Tower Speaker with Bluethooth with following features:

•

2.1 CH Stereo Home Theater Sound

•

Bluetooth-ISSC, A2DP with Auto Pairing

• Play And Stream Your Music From Any Bluetooth

Device

•

FM PLL Tuner with 30 Station Memory Presets FM Frequenc y: 87.5-

108MHz

• RCA L/R Audio-In Jacks for Stereo Connections

• 3.5mm Aux-In Jack for MP3 Player/Smartphone Connection (Cable

Included)

•

USB Flash Drive Reader for Audio Playback

•

USB Port Also Charges Your Mobile Device

•

Digital Clock

•

Full Function Remote Control

4

PREPARATION FOR USE

ACCESSORIES

Unpack the unit carefully. Carefully remove all the accessories from the display carton.

We recommend that you save the box and packing materials, in case you wish to store the unit. Don’t remove any labels or sticker on the rear of the unit and adaptor.

Before setting up the unit, verify that the following accessories are present:



Instruction manual x 1



Remote control x 1



3.5mm audio cable x1



Smart phones supporter x1



Wooden base x1



Screws x4.



Mini screwdriver x1

5

MAIN UNIT

LOCATION OF CONTROLS

1. Power button

2. Source/pairing button

3. Skip-/tune- button

4. Volume- button

5. Volume+ button

6. Skip+/tune+ button

7. MEM/STOP button

8. Play&pause/dimmer

9. 3.5mm Aux in jack

10. USB port

11. Remote slot

12. Stand by light

13. Sleep light

14. Bluetooth light

15. Antena wire

16. RCA input jack

17. AC cord

18. Main Power switch

6

1. Standby button

2. Mute button

3. Mem- button

4. Mem+ button

5. EQ button

6. Repeat button

7. Dimmer button

8. Source button

9. Skip -/tune - button

10. Pairing button

11. Skip +/tune + button

12. Program button

13. Volume - button

14. Volume + button

15. Clock Button

16. Sleep button

17. Play & pause button

18. Folder - button

19. Folder + Button

20. Stop button

REMOTE CONTROL

7

Installing and replacing the batteries on the remote control

The remote control requires one “CR2025” type 3V lithium battery (Included), to extend the life of the original battery; a small clear plastic spacer tab has been inserted between the lithium battery and the battery terminal. In order to get your remote control working initially, pull the clear tab from the battery compartment at the base (straight) end of the remote.

If your remote becomes intermittent or you find you have to move nearer the unit to operate then the battery will probably need replacing.

To do this, slide the holder out from the base of remote. Remote the battery and replace with a 3 Volt Lithium CR2025. Ensure that the slide of the battery is on the underside of the holder as you slide it back in.

Caution: There is danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type of battery. Insert the battery holder into the battery compartment.

1. Please remove the battery to prevent damage or injury from possible battery leakage if the unit will not be used for a long period of time. Only use the specified size and type of battery.

2. Keep coin-sized button batteries and devices out of sight and out of reach.

3. Examine devices and make sure the battery compartment is secure.

4. Dispose of used button batteries immediately. Flat batteries can still be dangerous.

5. If you suspect a child has swallowed a button battery, immediately go to a hospital emergency room.

6. Tell others about the risk associated with button batteries and how to keep their children safe.

8

7. Please aim the remote control directly towards the remote control sensor in the front panel in order to receive a better signal for operation. Don’t put any objects between the unit and the remote control while operating the unit.

INSTALLATION

1. Fix the wooden base to the tower with screws

2. Connect main unit to AC power source.

3. Remove the clear tab from remote control.

TURNING THE UNIT POWER ON/OFF

1. In Standby mode, tap the Standby Button to turn the unit ON. The last selected input mode icon will show on LED display.

2. To turn the unit OFF, press the Standby Button to turn the unit OFF.

CLOCK SETTING

After connecting the AC plug, and turn on power switch. “12:00” will appear and start blinking on the LED display.

1. In Standby mode, press and hold the CLOCK Button of the remote control, the hour digits will blink.

2. Tap the or button to adjust the hour. Press and hold the button for fast advance / reverse setting.

3. Press the CLOCK Button to confirm the hour setting, the minute digits will flash to prompt for input.

4. Tap the or button to adjust the minute. Press and hold the button for fast advance / reverse setting.

9

5. Press the CLOCK Button again to complete the setting.

LISTENING TO RADIO

1. Press the Button to turn on the unit.

2. Tap the Source Button to select Radio mode, radio icon FM appears on display.

3. To manually tune the radio station, tap the or button repeatedly. Use the manual tuning method to tune in weaker stations that are bypassed during

Automatic Tuning.

4. To automatically tune to the next available radio, press and hold the or button for 1-2 seconds until frequency readout on the display begins to scan and then release the button. The tuner will stop scanning when it receives the next broadcasting station of adequate signal strength.

5. Adjust the volume control to the desired volume level.

6. If no button is pressed for 5 seconds in radio mode, the display will change to show current time. You can tap the PLAY & PAUSE Button to check the radio station you are listening after the channel number is shown.

HINTS FOR BEST RECEPTION:

The receiver has a built-in fm wire antenna hanging from the back cabinet. This wire should be totally unwrapped and fully extended for the best reception.

NOTE:

Automatic tuning depends on the signal strength of the broadcasting station, so weak stations may be skipped. You can manually tune to find the weak stations if a station gets skipped. With strong signals, the tuner may stop before it reaches the actual broadcast frequency, so you may need to manually tune for the best reception.

PRESET RADIO STATIONS

This unit has 30 preset memories for the FM radio.

1. Press the button to turn on the unit.

2. Tap the Source Button to select Radio mode.

3. Tune to the desired radio station either by “manually” or “automatically” tuning method.

4. Press PROG Button to enable the program function and the preset channel number

“P01” indicator will show on the LED and MEM icon flashing ..

5. Press the PROG Button to confirm the setting.

6. Repeat above steps 3-5 to store other stations.

Note: The unit can automatically search and store the preset memories. Press and hold the PROG Button for 4~5 seconds to activate auto preset mode and the total number of stations can be stored depends on the signal strength of

10

broadcasting stations.

RECALLING PRESET MEMORY CHANNELS

In radio mode, recall the pre-set channels by pressing the MEM- OR MEM+ Button of the remote or MEM/STOP of the panel.

LISTENING TO A BLUETOOTH ENABLED DEVICE

1. If the PHITB65BK has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the PHITB65BK with your

Bluetooth device.

• Press the

button to turn on the unit.

• Tap the Source Button to select Bluetooth mode. The icon will show on the

LED display and blue led light will flash FAST .it means PHITB65BK waiting for pairing. Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find the unit.

• Select " PHITB65BK" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) the unit with your device.

• Your will hear one beep sound. Then blue led light will light steadily. It means successfully pairing.

Note:



If you can’t pair the PHITB65BK with your Bluetooth enabled device, you can try to turn Off & On the power of your unit

 press PAIRING BUTTOM, it will disconnect with your bluetooth device.



On bluetooth mode, the PHITB65BK does not pair any bluetooth device after about 25 seconds, it will turn to alternate red and blue led light flashing. If the PHITB65BK still not pair any bluetooth device after about 3 minutes, the bluetooth turn to sleep mode.

2. If the PHITB65BK had been paired before :

Turn on the unit and tap the Source Button to select Bluetooth mode, The unit is searching the last paired device. Once it is found, blue led light will light steadily

3. After successfully pairing (linking), you can begin playing music from your

11

Bluetooth enabled device wirelessly to the speaker.

4. Press the Volume +/ Volume - Button on the speaker to adjust to the desired volume level.

5. After selecting your favorite song, press Play / Pause Button on the unit to play or pause the playback song.

6. Press or button to skip to the previous or next song.

7. If the unit needs to pair with another Bluetooth device. Press the Pairing Button,

you will hear one beep sound, the blue light will turn to red and blue

flashing.the unit will goes into Pairing/Discoverable mode again. Repeat steps on point 1 and 2 above.

Notes:

1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth operation since it may vary from model to model.

2. If your Bluetooth enabled device does not support A2DP profile, it will not play the music through the speaker, even if paired (linked).

3. If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the speaker as your computer’s default sound device.

4. This speaker doesn’t have handfree function

.

CHARGING YOUR SMART PHONE OR PORTABLE DEVICE

This unit features a USB port for charging your portable device (iPod, iPhone, Android phone, etc.) when used with the USB charging cord that came with your device.

1. Plug one end of the USB cable (excluded) into the USB Charging Port located on the panel of the unit. Plug the other end of the cord into the device you wish to charge.

2. Observe the battery charge indicator on your device to make sure the charging process starts normally.

3. Unplug the cable when your device is fully charged.

CAUTION:

Before charging, please refer to the user manual of the device you wish to charge to make sure the charging current requested does not exceed 1A (1000mA). Overloading the charging circuit may damage the unit permanently and void the warranty.

1. The USB charging port of this unit supplies a DC 5V output at 1000mA maximum current to charge your smart phone or portable device battery and it cannot support any other voltage range.

2. Make sure the device you want to charge has a battery charge rating of DC 5V only.

12

3. The USB port of this unit is designed for smart phone or portable device battery charging only and it cannot support data transfer or connect to computer.

4. Do not connect the USB port of this unit to other external power charger USB ports, it may damage both units and void the warranty.

Note:

1. Some smartphones and portable devices use proprietary USB connections and circuitry, so they may not charge when plugged into the USB port. Please refer to your device user manual before you attempt to charge them.

2. It is normal if the unit gets warm while the USB port is in use and charging your smart phone or portable device.

3. Do not charge your smartphone over 12 hours continuously. Disconnect your smart phone or other portable device from the USB cord once it is fully charged.

DIMMER OPERATIONS

Press the Dimmer Button to adjust the LED backlight intensity to obtain the best clarity of LED Panel readout.

Note:

•

Every time you turn on the unit, the LED backlight will revert to highest intensity to let you operate the unit easily.

•

Only the unit is on, you can change the LED backlight intensity. It has three levels.

SLEEP TIMER OPERATIONS

1. In Radio, Bluetooth USB or AUX mode, when you press the Sleep Button once, the

“OFF” indicator will appear on the LED display. Press again to choose time :10-20-

30-40-50-60-70-80-90 minutes.

2. Tap the Sleep Button repeatedly to select the desired sleep time. : 10-20-30-40-50-

60-70-80-90 minutes.After sleep timer has been selected, wait for 5 seconds to confirm. The unit will stop and go into Standby mode automatically when the selected sleep time has expired.

3. To check sleep time, press the Sleep Button.LED display will show the status

.

Note:



If have set the sleep time, the unit will go into Standby mode automatically when

 the selected time has expired.

If you have chosen to sleep to music from an external device connected to AUX

13

input, the sleep timer will shut off the power to this unit only but it will not turn off power to the external device.

USB OPERATIONS

1. Press the button to turn on the unit.

2. Tap the Source Button to select USB mode.

3. Plug USB device into the USB port, it will automatically play.

4. Tap the or button to slect the songs.

PROGRAM THE USB

This unit can be programmed to play any sequence of up to 20 tracks in USB mode.

1. Load USB device.

2.

After loading USB device,press the stop button to stop mode.

3.

Press and hold for 3 seconds PROG button ‘ P01 ‘will shown on the display.

4.

Use the skip +/- button to select the desired track to be programming.

5.

Press ‘PROG’ button again to save the selected track.

6.

Repeat step 3-6 to program up to 20 tracks.

7.

Press the Play button to play according to the programmed track when programming is completed.

8.

Clear the program (Resume Normal Playback) Press the stop button twice in the program mode or change to another mode to clear the programmed tracks.

AUXILIARY INPUT

This unit provides two differant auxiliary audio signal input jacks for connecting external audio devices like MP3 players, CD players and listen to them through the speakers of this unit

One is 3.5mm input jack,the other is RCA input jack.

1. Use an audio cable ( included) with one 3.5 mm stereo plug on each end of the cable.

2. Plug one end into the AUX-IN Jack on the top panel of main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.

3. Turn on the unit and external audio device.

14

4. To select auxiliary audio input, tap the Source Button to select AUX mode. “AUX” icon appears on display.

5. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

Note:

•

If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit.

•

Press the button to turn off the unit when you have finished listening. Don't forget to switch off the power of your external device as well.

If want to connect with RCA jack, pls tap the Source Button to select AUX mode.

“AUX” icon appears on display and flashing.

CARE AND MAINTENANCE

1. Do not subject the unit to excessive force, shock, dust or extreme temperature.

2. Do not tamper the internal components of the unit.

3. Clean your unit with a dry cloth. Solvent or detergent should never be used.

4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

5. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

CLEANING THE UNIT

•

To prevent fire or shock hazard, disconnect your unit from the AC power source

•

•

• when cleaning.

The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts.

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet.

If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.

CAUTION:

Never allow any water or other liquids to get inside the unit while cleaning.

15

TROUBLE SHOOTING GUILDE

Should the system exhibit a problem, please check the following before seeking service.

Symptom Possible Problem Solution

The unit does not respond (no power).

AC plug is not plugged into a wall outlet well;

Wall outlet has no power.

Plug the AC cord into a wall outlet well.

Plug another device into the same outlet to confirm the outlet is working.

Volume level is set too high on your device.

Decrease the volume until get the best sound.

Sound is distorted. Sound source is distorted.

If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself.

Unit gets warm after playing long time

This is normal after working long time in high volume level.

Turn off the unit for a period of time or adjust the volume to a lower level.

SPECIFICATIONS

GENERAL

Power source

FM frequency range

FM Sensitivity

USB

USB charging out

Bluetooth working distance

Remote controller working distance

Battery power requirment for remote controller

AC in : ~100-240V 50/60Hz 50W

87.5~108Mhz

17dbm. music playing support MP3 format, memory up to 32G

DC5V,1A for phone battery charge

33 feet in open area

23 feet in open area

CR2025X1pc

Bluetooth

Power Output

Support A2DP

2x10W+20W Subwoofer

NOTE: As a result of continual improvements, the design and specifications of

the product within may differ slightly from the unit illustrated on the package.

Printed in China

16