Installing the Drive
Before installing the drive, turn off
the system power.
Disconnect the power cord,
and remove the cover.
• Remove a vacant 5.25” drive bay panel from
the computer. Slide the drive into the drive
bay.
Method A
Set the jumper on the rear of
the drive as necessary.
DIGITAL
AUDIO
ANALOG
AUDIO
DG
R G L
CS M
S L A
39
40
INTERFA
CE
POWER
1
2
+5 GND
+12
A. When using a Primary IDE port
If you need to connect your drive to the same
primary IDE channel as the hard drive, the drive
should be set to SLAVE position.
Super Multi DVD Writer
Method B
DIGITAL
AUDIO
ANALOG
AUDIO
DG
R G L
CS M
S L A
39
40
INTERFA
CE
POWER
1
2
+5 GND
+12
B. When using a Secondary IDE port
❶ If there is no device connected to the
secondary IDE channel, connect the
drive to this channel and set the jumper
to MASTER.
❷ When two drives are connected, set one
drive to MASTER and the other drive to
SLAVE. If your operating system encounters
interface problems after installing the new
drive, try swapping the jumpers or move
one drive to another IDE channel.
Super Multi DVD Drive
DIGITAL
AUDIO
ANALOG
AUDIO
DG
R G L
CS M
S L A
39
40
INTERFA
CE
POWER
1
2
DIGITAL
AUDIO
+5 GND
+12
ANALOG
AUDIO
DG
R G L
CS M
S L A
39
40
INTERFA
CE
POWER
1
2
+5 GND
+12
First Drive
Second Drive
Connect the audio cable/IDE
data cable/DC power cable
to the drive.
❶ Connect the audio cable (if applicable) to
the drive and then to the computer’s audio
connection, located on the sound card or
the mother board.
This connection is normally not required.
❷ Connect the IDE data cable to the back of
the drive.
❸ Connect a 4-pin power supply cable from
the computer to the drive.
IDE Cable
❷ IDE
Cable
Audio Cable
❶ Audio Cable
MarkingL-R
L-R
Marking
Sound Card
Replace the cover,
connect the power cord
and restart your computer.
• Your computer configuration may different
from the illustrations.
❸ DC
Power
DC
Power
Cable
Cable
Quick Set-up Guide
Super Multi DVD Drive
GSA-H10N
GSA-H10L
To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive,
please refer to the CD manual.
Features
•
•
•
•
•
•
•
•
*
System Environment
Enhanced-IDE (ATAPI) interface.
Power tray loading and ejection of disc. (The disc can also be
ejected manually.)
Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW,
DVD+R DL, DVD-RAM Drive functions into one drive.
Supports Region playback control Phase II.
Supports Windows 2000 Professional, XP Home Edition, XP
Professional.
Automatic buffer underrun error prevention technology.
Automatic buffer underrun error prevention technology.
Supports LightScribe Direct Label Printing Technology *Optional.
You can use a variety of Drive
LightScribe
GSA-H10L
GSA-H10N
Supported
Not Supported
Package Items
Item
Computer
This unit can be operated in the system environment explained here.
System
requirements
CPU: Pentium III 700MHz (Recommanded system
requirements for optimal performance, CPU: Pentium
IV 2.4GHz or faster, Memory: 512MB or greater)
VGA Card Memory
128MB or greater.
20GB or more free space. (The free space needed
for writing depends on the quantity of data.)
Enhanced-IDE interface (as Primary Slave,
Secondary Master or Slave)
5.25-inch half-height bay required
+5V/+12V power socket required
Windows 2000 Professional/XP[Home Edition/
Professional/Media Center Edition(SP2)],
Direct X 9.0 or Higher is required
CD-R : LG, Mitsubishi Kagaku Media,
Verbatim, Taiyo Yuden or TDK discs are
recommended.
CD-RW : LG, Ricoh, Mitsubishi Kagaku Media,
Verbatim discs are recommended.
DVD-R : Maxell, Mitsubishi Kagaku Media, Taiyo
Yuden are recommended.
DVD-RW : JVC, Mitsubishi Kagaku Media are
recommended.
DVD+R : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD+RW : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD-RAM : Maxell, Panasonic are recommended.
DVD±R DL : Mitsubishi Kagaku Media, Verbatim
are recommended.
Hard disk
Interface
Drive bay
Power
Software Required
OS
CD-R, CD-RW,
DVD-R, DVD-RW,
DVD+R, DVD+RW,
DVD-RAM,
DVD±R DL discs
Quantity
- Internal Super Multi DVD Drive
- Recording & Authoring Software
[Nero, InCD, Power Producer,
MPEG-2 Software (PowerDVD)]
- E-IDE (ATAPI) cable
- Audio Cable
- Mounting Screws
- Quick Set-up Guide for Super Multi DVD Drive
1
1
1
1
4
1
* Compatibility problem in write/read function may occur with some media
depending on the media manufacturing quality.
Specifications
Items
Items
General
Performance
Host Interface
E-IDE/ATAPI
Supported Discs
DVD-ROM(Single/Dual), DVD-RW, DVD-R,
DVD-R Dual layer, DVD+RW, DVD+R,
DVD+R Double layer, DVD- RAM, CD-Digital
Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROM
XA-Ready, CD-I FMV, CD-TEXT, CD-Bridge,
CD-R, CD-RW, Photo-CD (Single & Multi-Session),
Video CD, DVD-VIDEO
Disc Diameter
12cm/ 8cm
(8cm disc can be used only with drive placed horizontally.)
Mounting direction Horizontal/Vertical
Read/Write Speed
Write : (CD-R) : 4X, 8X, 16X, 24X, 32X, 40X, 48X
(CD-RW) : 4X, 10X, 16X, 24X, 32X
(DVD-R) : 2X, 4X, 8X, 16X
(DVD-RW) : 1X, 2X, 4X, 6X
(DVD+R) : 2.4X, 4X, 8X, 12X, 16X
(DVD+RW) : 2.4X, 4X, 6X, 8X
(DVD-RAM): 2X, 3X, 3X-5X(Ver.2.2),
6x, 6x-8x, 6x-12x
(DVD+R DL): 2.4x, 4x, 6x, 8x, 10x
(DVD-R DL): 2x, 4x, 6x
Read : (CD-ROM/R) : 48X max
(CD-RW) : 40X max
(CD-DA(DAE)) : 40X max
(8cm CD) : 16X max
(DVD-ROM)(Single/Dual) :16X/12X max
(DVD+/-RW) : 13X max
(DVD+/-R) : 16X max
(DVD-VIDEO) : 4.8X max
(DVD-RAM) : 12X max
(DVD+R DL): 12X max
(DVD-R DL): 12X max
❋ The drive’s appearance and specifications may change without
prior notice.
P/NO. 3828HN1008S
Ver. A
Data transfer rate
*Sustained CD-ROM : 7200 Kbytes/s (48X max)
DVD-ROM : 22160 Kbytes/s (16X max)
*Burst(ATAPI) 16.6 Mbytes/s (PIO Mode 4), (MULTI-DMA Mode 2)
33.3 Mbytes/s (Ultra-DMA Mode 2)
Average Access
Time (1/3 Stroke)
Buffer capacity
MTBF
Audio Output
Line Output
CD-ROM: 125msec (Typical)
DVD-ROM : 145msec (Typical)
DVD-RAM : 270msec (Typical)
2 Mbytes
100000 Power On Hours (Duty Cycle 10%)
0.7 Vrms at 10 kohm(Typical)
Environmental Level
When operating
Temperature: 5 °C to 45 °C
Humidity: 15% to 85% R.H. (non condensing)
When not operating Temperature: -30 °C to 60 °C
Humidity: 10% to 90% R.H. (non condensing)
Electrical
Power
DC 5V, DC 12V
Software
Install the appropriate CD Recording Authoring Software before using
this unit.
* Please uninstall any previous CD burning software you may have loaded on your
PC in order to prevent possible compatibility issues.
Once you have installed the application software, you may (if you wish) begin to
reinstall previous software, taking note for errors.
We recommend using the drive with the latest software as some problems
encountered when using the drive can be solved by updating the software.
Please visit www.lgservice.com and install the program, “LG ODD Online
F/W update.” By using the program, you can automatically check the latest
information about FirmWares and update the FirmWare.
Worldwide support ; http://www.LGservice.com
Worldwide corporate site : http://www.LGE.com
Safety Instructions
PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo
masterizzatore utilizza un raggio laser che, se osservato da vicino, può
danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.
Al fine di prevenire eventuali folgorazioni, evitare di smontare
l’apparecchio. All’interno dell’apparecchio non sono presenti parti che
richiedono manutenzione da parte dell’utente. In caso di difetti o guasti,
rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di procedure
diverse da quella espressamente indicate in questo manuale può provocare pericolose esposizioni alle radiazioni laser.
CAUTION: The laser used in the Super Multi DVD Drive can damage
your eyes. Do not attempt to open the cover. To reduce the risk of
electric shock, do not remove the cover (or back).
There are no user-serviceable parts inside. Refer servicing to qualified
service personnel. Use of controls or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
WARNING: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,
evitare di esporre questo apparecchio alla pioggia o ad una eccessiva
umidità ambientale.
VORSICHT : Der in diesem Super Multi DVD-Laufwerk benutzte Laser
kann Ihre Augen schädigen. Versuchen Sie keinesfalls, die Abdeckung
zu öffnen. Um die Gefahr eines elektrischen Schocks zu reduzieren,
sollten Sie die Abdeckung (oder Rückseite) keinesfalls entfernen.
Im Inneren des Geräts befinden sich keine Teile, die vom Benutzer selbst
gewartet werden können. Überlassen Sie die Wartung qualifizierten
Kundendiensttechnikern. Beachten Sie bei der Benutzung von
Bedienelementen und der Durchführung von Prozeduren unbedingt die
Anweisungen dieses Handbuchs, da andernfalls gefährliche Strahlung
freigesetzt werden kann.
PRECAUCION: El láser utilizado en la unidad Super Multi DVD puede
dañar sus ojos. No intente abrir la tapa. Para reducir el riesgo de
descarga eléctrica, no quite la tapa (ni la parte posterior).
No hay piezas internas que deba mantener el usuario.
El servicio de mantenimiento debe efectuarlo personal técnico cualificado.
El uso de controles o la ejecución de procedimientos distintos de los
especificados en este manual pueden ser causa de exposición a
radiación peligrosa.
WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder
Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen
Schocks zu reduzieren.
ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,
no exponga este aparato a la lluvia ni a la humedad.
ATTENTION: Le faisceau laser utilisé dans ce lecteur/graveur de Super
Multi DVD est dangereux pour les yeux.
Ne pas tenter d’ouvrir le couvercle. Ne déposer ni la façade, ni le
panneau arrière (risque d’électrocution).
Aucun élément interne n’est réparable par l’utilisateur. L’utilisation de
commandes ainsi que l’exécution de procédures autres que celles
spécifiées dans le présent guide risque de provoquer une dangereuse
exposition aux radiations.
CUIDADO: O laser usado no drive Super Multi DVD pode danificar
seus olhos.Não tente levantar a tampa. Para reduzir o risco de choque
elétrico, não retire a tampa ou a parte traseira.
No seu interior, não há partes a serem manuseadas pelo usuário.
Consertos ou manutenção devem ser feitos somente pelo Serviço
Autorizado LG. O uso dos controles ou a execução de procedimentos
diferentes que não sejam os especificados neste manual podem resultar
em exposição perigosa à radiação.
AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à
l’humidité (risques d’incendie et d’électrocution).
This product is manufactured to comply with the radio interference
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:
89/336/EEC, 93/68/EEC und 73/23/EEC.
Ce produit a été fabriqué conformément aux prescriptions EEC DIRECTIVE
89/336/EEC, 93/68/EEC et 73/23/EEC.
Questo prodotto risponde alle direttive CEE 89/336, 93/68 e 73/23, relative
alla compatibilità elettromagnetica.
AVISO: Para reduzir o risco de incêndio ou choque elétrico não exponha
este aparelho á chuva ou humidade.
Industry Canada requirement
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
FCC COMPLIANCE STATEMENT
Note :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an Authorized Service Center for help.
Este producto ha sido fabricado cumpliendo los requisitos sobre interferencias
de radio de la DIRECTIVAS CEE 89/336/CEE, 93/68/CEE y 73/23/CEE.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASE 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUCTO LÁSER
PRODOTTO LASER
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID EXPOSURE TO THE BEAM.
•
ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED
ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING.
•
ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING NÅR
DEKSEL ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This Super Multi DVD Drive is for use only with UL listed personal computers
that have installation instructions detailing user-installation of card cage
accessory.
VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING NÄR
DENNAL DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
■
VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET ALTTIINA
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEN.
Microsoft® and Windows® are trademarks registered in the United States
and other countries by the Microsoft Corporation.
■
The company names and product names written in this manual are
trademarks or registered trademarks of the respective companies.
The appliance is not intended for use by young children or infirm persons without
supervision.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising