Iogear GKM581R 2.4GHz Wireless On-Lap Keyboard Quick Start Guide

Below you will find brief information for wireless keyboard GKM581R. This guide covers the basic setup for the keyboard and mouse, pairing the receiver, using different modes for the mouse and charging the batteries. You can take advantage of it for gaming and other activities.

PDF Download

Document

 FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential setting.
This product generates, uses, and can radiate radio frequency energy and, if not
installed and used as directed, it may cause harmful interference to radio
communications. Although this product complies with the limits for a Class B
digital device, there is no guarantee that interference will not occur in a particular
installation.
CE Compliance
This device has been tested and found to comply with the following European
Union directives: Electromagnetic Capability (89/336/EMC), Low Voltage
(73/23/EEC) and R&amp;TTED (1999/5/EC).
Limited Warranty
WE'RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Use the live chat at www.iogear.com to try and solve any issues you may be
having with the product
2. Visit the Tech Info Library/FAQ on www.iogear.com (under the Support tab)
3. Call the 24/7 tech support line at 1-866-946-4327 (U.S. only) or
1-949-453-8782
Warranty Information
This product carries a 3 Year Limited Warranty. For the terms and conditions of this
warranty, please go to http://www.iogear.com/support/warranty or
call 1-866-946-4327
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Contact
IOGEAR Inc.
Address: 19641 Da Vinci, Foothill Ranch, CA 92618 USA
Toll Free: 866-9-I0GEAR
Phone: 949-453-8782
Web site: www.iogear.com
Email: [email protected]
‘AboutUs
&eacute; FUN
IOGEAR offers connectivity solutions that are innovative, fun, and
stylish, helping people enjoy daily life using our high technology
products.
@ GREEN
IOGEAR is an environmentally conscious company that emphasizes
the importance of conserving natural resources. The use of our
technology solutions helps reduce electronic waste.
&copy; 2010 IOGEAR, INC.
via Sen Guide
2.4GHz Wireless On-Lap Keyboard
with Optical Trackball and Scroll Wheel
GKM581R
Q1139
Package Contents
1 x 2.4GHz On-Lap Keyboard
1 x USB RF Receiver
2 x AA NiMH Rechargeable Battery
1 x USB Charging Cable
1 x Quick Start Guide
1 x Warranty Card
Requirements
Computer / Device*
- 1 USB port
Operating System
- Windows XP
- Windows Vista (32-bit / 64-bit)
- Windows 7 (32-bit / 64-bit)
- Mac OS X v10.3.9 or later**
*Device must support USB HID keyboard device and USB HID-compliant
mouse in order to have the keyboard and mouse functionality respectively.
* Some Mac special keys may not work
Ш Keyboard — Front View
0 м о о Ко г:
—_—t К К od od dd
ослом — &copy; &copy;
17.
Ш Keyboard — Side View
Mouse Left-Click
Mouse Right-Click
Default Homepage
E-mail
My Computer
Back
Forward
Close
LED
. Play/Pause
. Stop
. Previous Track
. Next Track
. Mute
. Volume Down
. Volume Up
Optical Trackball
Tab“,
Caps Lock
OS
Scroll Pause
Lock Break
&lt;— Backspace
N
Insert Delete Ctrl
1. Mouse Left-Click
2. Connect Button
3. USB Charging Port
4. Rapid Fire/Normal Mode Switch
5. Scroll Wheel
Ш Keyboard — Bottom View
1. Battery Cover
El
Connect Recharge
Rapid Fire | Normal
Mode
Ш USB RF Receiver
1. USB connection
2. LED
Installation
STEP 1
Open the battery cover from the
bottom of the keyboard and take the
USB RF receiver out. Then, insert
the 2 included AA rechargeable
batteries into the battery tray* and
close the battery cover.
*Please make sure the batteries are installed properly
as the directions inside the battery tray.
STEP 2
Connect the USB RF receiver into
any open USB port of your
computer/device*.
*Device must support USB HID keyboard
device and USB HID-compliant mouse in
order to have the keyboard and mouse
functionality respectively.
FINAL STEP
Now the keyboard setup is completed and ready for the initial
charge before use, please see the Charging section for detail.
Charging
Note: The rechargeable batteries need to be fully charged before use. The initial
charge will take approximately 6 hours.
Connect the included USB charging cable to the USB charging port from the
keyboard and the USB port of your computer/device* to charge. The Battery Low
LED will show in solid red indicating the keyboard is being charged**. The LED will
show in solid green once the keyboard is fully charged, then you can remove the
USB charging cable.
*Computer/device must be powered on
Keyboard can be used while being charged (Not recommended for initial charge)
Rapid Fire | | Могта!
Mode
Recharge
se o
090000000
0000298&quot;
Pairing (Optional)
The keyboard and mouse should be working properly without the need
to pair. If the keyboard and mouse are not working, please follow the
below instruction to pair the USB RF receiver and the keyboard.
Note: Please keep the distance between the keyboard and USB RF receiver as
close as possible when pairing. The keyboard will connect to the closest USB RF
receiver if there are more than 1 set of this keyboard within the same area.
Press the Connect button on the top side
of the keyboard while the USB RF receiver
is connected to the computer/device*. The
LED on the USB RF receiver will flash in
blue for 1-3 seconds indicting the pairing
is completed.
Recharge
* Computer/device must be powered on
Now the keyboard and mouse should be working properly. If the keyboard and
mouse are not working, please repeat the above instruction.
Sleep Mode
After the keyboard is idle for 8 minutes, it will go into sleep mode to save power.
To wake it up, simply press the mouse left-click or right-click button.
Rapid Fire/Normal Mode Switch
Slide the switch to either left or right to choose from different mode settings
Normal Slide to the right Press left-click key to perform single left-click
Rapid Fire Slide to the left Press and hold left-click key to perform rapid fire
LED Indication
LED
Solid Green Batteries are fully charged
Solid Red Batteries are being charged
Flashing Red Power is low and the batteries need to be recharged
">

Hello! I am an AI chatbot specifically trained to assist you with the GKM581R 2.4GHz Wireless On-Lap Keyboard Quick Start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

2.4GHz Wireless
On-Lap Keyboard
Optical Trackball
Scroll Wheel
Rechargeable Batteries
Rapid Fire Mode
Sleep Mode
USB Charging Port

Frequently asked questions

Press the Connect button on the top side of the keyboard while the USB RF receiver is connected to the computer. The LED on the USB RF receiver will flash in blue for 1-3 seconds indicating the pairing is complete.

Slide the switch to the left to choose Rapid Fire mode, where you can perform rapid fire by pressing and holding the left-click key. Slide the switch to the right to use Normal mode, where a single left-click is performed when you press the left-click key.

The initial charge will take approximately 6 hours.

After the keyboard is idle for 8 minutes, it will go into sleep mode to save power. To wake it up, simply press the mouse left-click or right-click button.