section b - Hubbell Wiring Device

section b - Hubbell Wiring Device
SECTION B
Table of Contents
Twist-Lock® Devices
50A Twist-Lock® Devices
Product
Page
Products at a Glance
B-2
Insul-Lock™ Connectors
B-4
Midget Twist-Lock® Devices
B-6
Twist-Lock®
B-8
Midget
Accessories
Twist-Lock®
Devices
15 Amp
20 Amp
30 Amp
B-11
B-19
B-28
Compatibility and Environmental Protection Chart
B-18
Switched Safety Enclosures
B-39
Mechanical Interlock Switched Safety Enclosures
B-41
Add-A-Shroud®
B-42
www.hubbell-wiring.com
Hubbellock® Devices
Product
Page
Non-NEMA Twist-Lock® Devices
10 Amp
20 Amp
30 Amp
B-43
B-44
B-47
Variload® Twist-Lock® Devices
B-49
Accessories
15 Amp
20 and 30 Amp
Safety-Shroud® Boxes
B-50
B-52
B-54
50A Twist-Lock® Devices
B-56
50A Accessories
B-60
Hubbellock®
Devices
B-61
Hubbellock®
Accessories
B-68
®
Wiring Device-Kellems
B-1
Twist-Lock® Devices
Products at a Glance
Midget Twist-Lock® Devices
• Totally insulated body adds extra measure
of safety
• Abuse resistant nylon housing
• Patented locking lugs interlock the two sections
together providing a secure assembly
• Powerful, cord-gripping jaws designed to
eliminate conductor slip and strain on terminals
Insulgrip® Twist-Lock® Devices
Hubbellock® Devices
• Tough ribbed nylon housing for secure gripping
• Enhanced safety because access to live
female contacts is restricted by the springloaded safety shutter
• Insulated nylon construction to keep non-current
carrying parts from becoming energized
• Longer contact life is assured by
supplementary springs. Other devices rely
just on contacts themselves to provide
proper contact pressure
• Self-threading screws specially designed for
secure assembly
• Voltage color coding on receptacle face
facilitates proper mating of devices
• Insulated non-metallic housing enhances
safety and abuse resistance
Safety-Shroud® Twist-Lock® Devices
• Tough nylon shroud protect blades
from damage
• Prevents exposure to potential arc
• Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR 1910.147
• Accepts conventional NEMA locking plugs
Twist-Lock® Devices
20A, 125V AC, 2 Pole, 3 Wire Grounding
Insulgrip® Plug
Features
Ribbed nylon housing provides a secure grip and impact and
chemical resistance.
Superior cord grip design protects terminations from excess strain.
Clear, funnel shaped wire entry for ease of termination.
Integral dust shield protects wiring chamber from dust or
contaminants.
Ordering Information
Description
Black and white nylon.
Watertight
Safety-Shroud®
Devices
• Gland seal prevents water ingress at
cord entrance
• Strong PBT body for heavy duty applications
• Closure cap creates environmental seal
when device is not in use
• Vsible color coded rating label on devices
ensure proper mating
Cord Diameter
.360"-.930" (9-24)
UPC
783585037707
Catalog Number
HBL2311
Listings
Listed to UL 498
Fed.Spec. W-C-596
Certified to CSA C22.2 No.42
Specifications
Housing / Cord Clamp
Terminal Retainer
Blades
Terminal Screws
Terminal Clamp
Assembly Screws
Nylon
Clear polycarbonate
Brass
#10-32 Brass (Phillips / Slotted / Robertson)
Cold rolled steel – nickel plated
Steel - nickel plated
Performance
Electrical
Current Interrupting
Dielectric Voltage
Certified for current interrupting at full rated current
Withstands 2,000V minimum
Mechanical
Terminal Accommodation #16 AWG - #8 AWG stranded copper wire only.
Accessories
Terminal Identification
Terminals identified in accordance with UL 498
Environmental
Flammability
Moisture Resistance
Operating Temperatures
HB or better per UL94 or CSA 22.2 No. 0.6
IP20 Suitability
Maximum Continuous 75°C Minimum -40°C (w/o impact)
Connector
Single Receptacle
Flanged Receptacle
Weatherproof Boot
HBL2313
HBL2310
HBL2316
HBL6031
Resources
Customer Use Drawing
eCatalog
50 Amp Insulgrip® Devices
• Heavy-duty design built for heavy-duty
applications
• Thermoplastic clamp provides a consistent,
durable grip. Sealed cable entry keeps out
moisture and dust
• Stainless steel shroud restricts mismating
with the wrong device
• Padlock capable shroud allows compliance
to OSHA lockout/tagout regulation 29 CFR
1910.147
B-2
®
Wiring Device-Kellems
a
ax
a a
a
a
a
eSpec Sheets Available Online
• Product Features
• Specifications
• Dimensions
• Performance
• Complementary Products
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Insul-Lock™ Connectors and Panel Mounts
Miniature 25 Amp Power Connections for Entertainment
Applications
Ideal for use with LED lighting and other applications
including multiple screen video walls. The rear of the
connector is black to blend in when used in visible areas.
Available in both inline and panel mount styles, Hubbell’s
Insul-Lock™ Connectors have a quick release, vibration
resistant latch. Hubbell’s connections intermate with
other similar brands.
• Meets NEC 520.68 requirements for extra-hard
usage cords or cables.
• Complies with existing industry conventions.
HBLCPIBL
• Simplifies installation for domestic OEM’s.
• Interchangeable with installed base.
• Suitable for use in UL1640 applications.
HBLPMIBL
Housing Design
• Impact-resistant thermoplastic
construction
• Industry standard mating
• Color coded blue for power in
and gray for power out
Contacts
• The insulation displacement terminal
reduces the time required for wire
preparation and provides uniformity
in the quality of termination
One-Piece Design
• Connectors accept up to #12/3
AWG SO cable
• Panel mount devices accept
commonly available .25" spade
style connectors
Assembly
• Assembly screws have multiple drive
heads for screwdriver versatility. Only
two assembly screws are needed
to close this device, make the wire
terminations and retain the cord
Identification
• I.D. marking surface provides quick,
sure circuit identification
Markings
• “TURN & PULL” marking is highly
visible, reducing possible damage to
equipment by attempting disconnection
prior to unlocking
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-3
Twist-Lock® Devices
Insul-Lock™ Connectors
Inline Connectors
Description
Style
Color
Catalog Number
25 Amp
Power In
Blue
HBLCPIBL
25 Amp
Power Out
Gray
HBLCPOGY
Description
Style
Color
Catalog Number
25 Amp
Power In
Blue
HBLPMIBL
25 Amp
Power In, Divided
Blue
HBLPMIDBL
25 Amp
Power Out
Gray
HBLPMOGY
25 Amp
Power Out, Divided
Gray
HBLPMODGY
HBLCPIBL
HBLCPOGY
Panel Mounts
POWER IN
HBLPMIBL
DIVIDED
HBLPMIDBL
Acessories
POWER OUT
HBLPMOGY
DIVIDED
HBLPMODGY
Description
Catalog Number
Panel Mount Retainer Plate
HBLPMRP
Panel Mount M3x.5 Screw, 8mm Long
HBLPMSC
Certifications
UL Recognized component for USA and Canada
Note: Not for make or break under load.
Dimensions
Ø.69
(17.6)
.80
(20.2)
.80
(20.2)
.28 (7.0)
.28 (7.0)
.18 (4.5)
.18 (4.5)
.71
(18.0)
3.12
(79.2)
2.33
(59.1)
.71
(18.0)
.25
(6.4)
.25
(6.4)
1.19 (30.2)
1.19 (30.2)
1.06
(Ø27)
HBLCPIBL,
HBLCPOGY
1.23 (31.2)
HBLPMIBL,
HBLPMOGY
HBLPMIDBL,
HBLPMODGY
1.22
(31.0)
1.02
(26.0)
HBLPMIBL, HBLPMOGY
HBLPMIDBL, HBLPMODGY
Dimensions in Inches (mm)
B-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Midget 15 Amp Plugs and Connector Bodies
Hubbell’s Valise® insulation displacement terminal for Midget Twist-Lock® Plugs
and Connector Bodies are the right choice for economy, wiring speed and long life.
• Totally insulated body adds extra measure of safety.
• Nylon webs join two sections together which makes assembly of the device
quick and easy.
• Patented locking lugs interlock the two sections together when the device is
assembled providing a secure assembly.
HBL7594V
• Powerful, cord-gripping jaws designed to eliminate conductor slip and strain
on terminals.
• “TURN & PULL” marking is highly visible, reducing possible damage to
equipment by attempting disconnection prior to unlocking.
HBL7595V
Housing Design
• Totally insulated body adds extra
measure of safety
• Abuse resistant nylon housing
Contacts
• The insulation displacement terminal
reduces the time required for wire
preparation and provides uniformity
in the quality of termination
• Powerful, cord-gripping jaws designed
to eliminate conductor slip and strain
on terminals
One-Piece Design
• Nylon webs join two sections together
which makes assembly of the device
quick and easy
• Patented locking lugs interlock the
two sections together when the
device is assembled providing a
secure assembly, even in the most
abusive environments
Assembly
• Assembly screws have multiple drive
heads for screwdriver versatility. Only
two assembly screws are needed
to close this device, make the wire
terminations and retain the cord
Identification
• I.D. marking surface provides quick,
sure circuit identification
Markings
• “TURN & PULL” marking is highly
visible, reducing possible damage to
equipment by attempting disconnection
prior to unlocking
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-5
Twist-Lock® Devices
Midget Plugs and Flanged Inlets
W
W
GR
IP20
1.25"
(31.8)
SUITABILITY
HBL7465V
1.61"
(40.9)
1.19"
(30.2)
HBL7594V
1.59"
(40.4)
15A 125V
Plugs
1.06"
(26.9)
2.00"
(50.8)
NEMA
ML-1P
15A 125V
NEMA ML-1P
Description
Cord Dia.
Catalog Number
Valise® plug, black nylon.
.220"-.385"
(5.6-9.8)
HBL7465V*
Valise® plug, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
multiple drive screw terminals.
15A 125V
15A ML-2P
125V
NEMA
NEMA ML-2P
15A 125/250V
15ANEMA
125/250V
ML-3P AC
NEMA ML-3P
–
–
–
HBL7594V
–
.281"-.421"
(7.1-10.7)
–
HBL7594
–
Angle plug, black nylon cover,
phenolic body, multiple drive
screw terminals.
.335"-.421"
(8.5-10.7)
–
HBL7570
–
Valise® plug, black nylon, with
insulation displacement terminals,
multiple drive screws.
.300"-.430"
(7.6-10.9)
–
–
HBL7485V*
Black nylon body, phenolic base,
multiple drive screw terminals,
cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7485*
Same as above, except angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7432*
1.17"
(29.7)
Flanged Inlets
1.17"
(29.7)
HBL7594
.86"
(21.8)
1.17"
(29.7)
1.69"
(42.9)
Description
Catalog Number
Stainless steel flange, polarized,
exposed terminals.
HBL7467*
–
–
Stainless steel flange, not polarized,
exposed terminals.
HBL7466*
–
–
Exposed terminals, black nylon flange.
–
HBL7595N
–
Exposed terminals, stainless steel flange.
–
HBL7595
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) dia.
–
HBL7551
–
Exposed terminals, black nylon flange.
–
–
HBL7486N*
Exposed terminals, stainless steel flange.
–
–
HBL7486*
Note: See page B-6 for accessories.
*UL Listed only.
Male ML-2P devices have hollow center ground sleeves.
Male ML-3P devices have solid center neutral pins.
HBL7570
.94"
(23.9)
1.63"
(41.4)
1.06"
(26.9)
1.38"
(35.1)
.16" (4.1) DIA.
HBL7466, HBL7467
1.00"
(25.4)
2.06"
(52.3)
1.22"
(31.0)
1.75"
(44.5)
1.00"
(25.4)
1.00"
(25.4)
2.06"
(52.3)
1.22"
(31.0)
1.75"
(44.5)
2.06"
(52.3)
1.27"
(32.3)
1.75"
(44.5)
.16" (4.1) DIA.
.15" (3.8) DIA.
HBL7595N
HBL7595
1.00"
(25.4)
2.06"
(52.3)
1.22"
(31.0)
1.75"
(44.5)
.15" (3.8) DIA.
HBL7486N
.16" (4.1) DIA.
HBL7486
Dimensions in Inches (mm)
B-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Midget Connector Bodies and Flanged Receptacles
X
IP20
1.77"
(45.0)
W
SUITABILITY
Y
15A 125V
Connector Bodies
15A 125V
NEMA
ML-1R
NEMA ML-1R
Description
Cord Dia.
Catalog Number
Valise® connector body, black nylon,
polarized.
.220"-.385"
(5.6-9.8)
HBL7464V*
Valise® connector body, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
screw terminals.
15A 125V
NEMA
ML-2R
15A
125V
NEMA ML-2R
15A 125/250V
15A
125/250V
NEMA
ML-3R AC
NEMA ML-3R
–
–
–
HBL7593V
–
.281"-.421"
(7.1-10.7)
–
HBL7593
–
Angle connector body, black nylon
cover, phenolic body, screw terminals.
.335"-.421"
(8.5-10.7)
–
HBL7571
–
Valise® type, black nylon, with
insulation displacement terminals,
multiple drive screws.
.300"-.430"
(7.6-10.9)
–
–
Black nylon body, phenolic base,
multiple drive screws, cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7484*
Same as above, except for angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7433*
1.06"
(26.9)
.97"
(24.6)
HBL7464V
1.98"
(50.4)
1.19"
(30.2)
HBL7484V*
HBL7593V
2.42"
(61.5)
1.17"
(29.7)
1.13"
(28.7)
Flanged Receptacles
HBL7593
Description
Catalog Number
Stainless steel flange, exposed terminals.
HBL7468*
–
–
Exposed terminals, black nylon flange.
–
HBL7596N
–
Exposed terminals, stainless steel flange.
–
HBL7596
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in dia.
–
HBL7598
–
1.28"
(32.5)
1.17"
(29.7)
Exposed terminals, black nylon flange.
–
–
HBL7487N*
Exposed terminals, stainless steel flange.
–
–
HBL7487*
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in diameter.
–
–
HBL7489*
1.69"
(42.9)
HBL7571
1.97"
(50.0)
Note: See page B-6 for accessories.
*UL Listed only.
Female ML-2R devices have solid center ground pins.
Female ML-3R devices have hollow center neutral sleeves.
1.19"
(30.2)
HBL7484V
2.02"
(51.3)
1.13"
(28.7)
1.17"
(29.7)
HBL7484
.97"
(24.6)
2.06"
(52.3)
1.17"
(29.7)
1.75"
(44.5)
.16" (4.1) DIA.
HBL7596
1.00"
(25.4)
1.25"
(31.8)
2.06"
(52.3)
2.06"
(52.3)
1.17"
(29.7)
1.75"
(44.5)
.78"
(19.8)
1.14"
(29.0)
1.75"
(44.5)
1.63"
(41.4)
1.03"
(26.2)
1.38"
(35.1)
.15" (3.8) DIA.
.16" (4.1) DIA.
.16" (4.1) DIA.
HBL7596N
HBL7598
HBL7468
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-7
Twist-Lock® Devices
Midget Accessories
Weatherproof Accessories for ML-1
HBL7490V
Description
Catalog Number
Seal-tite® cover, black elastomer, for use with a HBL7465V plug when
used with a HBL7464V connector body or a HBL7464V connector
when used with a flanged inlet.
HBL7490V*
Seal-tite® cover, black elastomer, for use with a HBL7464V connector
body and combination of HBL7465V plug and HBL7490V cover.
HBL7459V*
Closure cover for use with HBL7466 or HBL7467.
Bead chain is nickel-plated.
HBL4890
Weatherproof Accessories for ML-2
HBL7459V
Description
Catalog Number
Seal-Tite®
cover, black elastomer, for use with a HBL7594V plug when
used with a HBL7593V connector body or a HBL7593V
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7593V connector
body and a combination of HBL7594V plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7595 or HBL7595N.
HBL4889
Weatherproof Accessories for ML-3
HBL4890
Description
Catalog Number
Seal-Tite® cover, black elastomer, for use with a HBL7485V or
HBL7485 plug when used with a HBL7484V or HBL7484
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7484V or
HBL7484 connector body and a combination of HBL7485V or
HBL7485 plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7486 or HBL7486N.
HBL4889
Note: *IP55 suitability when installed and used properly with plug and connector body combinations.
HBL7495V
HBL7440V
HBL4889
Dimensions in Inches (mm)
B-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Insulgrip® 15 Amp Plugs and Connector Bodies
Insulgrip products are synonymous with Hubbell’s ongoing commitment to
discovering ways to make products safer and last longer.
By encasing wiring devices in tough nylon housings, Insulgrip devices ensure
high impact, heat, and chemical resistance while insulating current-carrying
components from the user for maximum safety.
• The Insulgrip’s cord gripping design clamps conductors, not just the cable jacket,
making it the industry’s most powerful cord grip with superior strain relief.
• Each Insulgrip device is manufactured with roomy, separate wiring chambers
to insulate conductors and an individually molded face to keep out dust and
debris that can cause contamination over time.
HBL4720C
HBL4729C
Housing Design
• Ribbed nylon housing provides a secure
grip that’s impact and chemical resistant
• Beveled housing prevents snagging
when dragged across uneven surfaces
• Individually molded face for each blade
configuration keeps debris out of
plug interior
Internal Design
• Powerful cord grips clamp on individual
conductors and outer cord jacket to
prevent strain on terminations
• Individual wiring terminals are completely
enclosed in their own separate chambers
Cord Range
• Integral VARI-SIZE® insert adjusts
to a wide range of cord sizes:
.230"-.720" (5.8-18.3)
• VARI-SIZE® pointer set to “smaller
than gauge” position. Cord diameter
range is .230"-.360" (5.8-9.0). Accepts
slotted and Phillips head drivers
Assembly
• “Multiple drive” screw heads provide
screwdriver versatility. Pocketed
recess for cord grip screws deters
slippage of the screwdriver
Identification
• Catalog number is visible on the
device while in use for easy
identification
Visual Verification
• Transparent angled wiring entrance
holes guide conductor insertion and
allow for quick visual verification
of terminations
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-9
Twist-Lock® Devices
Features and Benefits
15 Amp Duplex Twist-Lock® Receptacles
Hubbell Wiring Device-Kellems line of duplex Twist-Lock® receptacles are
designed to deliver premium service and longer life. This rugged product design
establishes a new standard for 15 amp locking receptacles. A reinforced
thermoplastic top and base encapsulates the brass alloy contacts that are locked
together for unequaled assembly strength. Wiring and installation is simplified with
back and side wire terminations, integral wire restraints, and combination head
screws. The integral split circuit capability offers flexibility. Available in 2 pole, 3 wire
configurations including isolated ground and corrosion resistant versions.
• Superior spring characteristics for increased contact force, secure connections
and longer life.
• High-conductivity, corrosion resistant material for reliable, low resistance to
fault currents.
• Easy and reliable installation for stranded and solid wire.
• Features split circuit capability in the field.
• The assembly locks together to make the most abuse resistant receptacle ever.
HBL4700
Housing Design
• Reinforced thermoplastic construction
• High impact and heat resistance
provides maximum safety and
longer life
Terminals
• Single point break-off tabs
• High performance internal wiring clamps
and open terminal design provide for
the use of forked terminals
One-Piece Design
• Mounting strap tabs lock the body
and base together
• Brass mounting strap with stainless
steel grounding clip
Contacts
• Single piece, all brass contacts
• All terminals are back and side wired
including the ground
Identification
• I.D. marking surface provides quick,
sure circuit identification
Center Rivet
• Square head, 10-thread bronze center
rivet won’t rotate, reduces stripping
and resists corrosion
Dimensions in Inches (mm)
B-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Amp, 125 Volts
2 Pole, 2 Wire, Non-Grounding
IP20
W
SUITABILITY
15A 125V
NEMA
15A L1-15P
125V
UL Listed
NEMA
L1-15P
0.5 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7545C
1.97"
(50.0)
1.53"
(38.9)
Note: See page B-49 for accessories.
HBL7545C
Flanged Inlets
Description
Catalog Number
Nylon casing, polarized, backwired, Multiple drive screws.
HBL7524C
2.56"
(52.3)
2.19"
(55.6)
Note: See page B-48 for accessories.
1.69"
(42.9)
W
15A 125V
15A L1-15R
125V
NEMA
UL Listed
NEMA
L1-15R
0.5 HP
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7506C
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL7524C
Note: See page B-49 for accessories.
2.78"
(70.6)
Receptacles
Description
Catalog Number
Duplex, flush, black phenolic.
HBL7540
Single, flush, black phenolic.
HBL7535
Single, panel mount, 1¹⁵₁₆" (49.2) centers, black phenolic.
HBL7498
1.53"
(38.9)
1.41"
(35.8)
HBL7506C
Note: See pages B-48 and B-49 for accessories.
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, backwired. Multiple drive screws.
HBL7526C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL7526
1.33"
(33.8)
1.00"
(25.4)
3.28"
(83.3)
1.53"
(38.8)
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
2.75"
(69.9)
1.11"
(28.2)
#6-32
TAP
1.19"
(30.2)
HBL7540
2.56"
(52.3)
2.19"
(55.6)
#8-32 TAP
1.69"
(42.9)
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL7526C
1.00"
(25.4)
1.94"
(49.3) 1.39"
(35.3)
1.63"
(41.4)
#6-32 TAP
1.00"
(25.4)
2.38"
(60.5)
1.39"
3.28" (35.3)
(83.3)
1.19"
(30.2)
1.19"
(30.2)
1.39"
(35.3)
1.63"
(41.4)
HBL7535
HBL7498
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-11
Twist-Lock® Devices
15 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
W
G
IP20
1.91"
(48.5)
HBL4720C
1.22"
(30.9)
2.11"
(53.6)
1.53"
(38.9)
HBL4720CA
2.63"
(66.8)
G
W
G
Y
SUITABILITY
1.53"
(38.9)
X
15A 125V
NEMA
15AL5-15P
125V
UL/CSA
NEMA
L5-15P
0.5 HP
Plugs
15A 250V
15AL6-15P
250V
NEMA
UL/CSA
NEMA
L6-15P
1.5 HP
15A 277V AC
15A 277V
NEMA
L7-15PAC
UL/CSA
NEMA
L7-15P
2 HP
Description
Cord Dia.
Catalog Number
Insulgrip plug, black and white nylon.
Multiple drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL4720C
All black nylon.
.230"-.720"
(5.8-18.3)
HBL4720CBK
Insulgrip angle plug, 8 position angle,
black and white nylon. Multiple
drive screws.
.325"-.655"
(8.3-16.6)
HBL4720CA
Insulgrip plug, corrosion resistant,
yellow and white nylon. Multiple
drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL47CM20C HBL45CM70C HBL47CM70C
Elastogrip® plug, yellow elastomer,
dust tight.
300"-.655"
(7.6-16.6)
HBL2447
–
–
Elastogrip plug, yellow elastomer,
water/dust tight.
300"-.655"
(7.6-16.6)
HBL24W47
–
–
Valise® plug, yellow nylon.
.220"-.660"
(5.6-16.8)
HBL4723VY
Valise® plug, black nylon.
.220"-.660"
(5.6-16.8)
HBL4723VBK HBL4573VBK HBL4773VBK
HBL4570C
HBL4770C
–
–
HBL4570CA
HBL4573VY
HBL4770CA
HBL4773VY
Note: See page B-49 for accessories.
1.56"
(39.6)
Flanged Inlets
HBL24W47
1.88"
(47.8)
Description
Catalog Number
Insulgrip flanged inlet, nylon casing,
back wired.
HBL4716C
HBL4586C
HBL4786C
Stainless steel casing, brown phenolic.
HBL4716*
HBL4586*
HBL4786*
Corrosion resistant, stainless steel
casing, yellow melamine.
HBL47CM16*
–
–
Note: See page B-48 for accessories.
HP ratings are AC only.
Only plugs are HP rated.
See page B-69 for technical information on Insulgrip devices.
*These flanged inlets will not accept Valise® connector bodies.
1.50"
(38.1)
HBL4723VY
2.56"
(65.0)
2.19"
(55.6)
1.69"
(42.9)
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL4716C
1.09"
(27.7)
1.75"
(44.5)
2.31"
(58.7)
1.50"
(38.1)
1.94"
(49.3)
.16" (4.1) DIA.
HBL4716
Dimensions in Inches (mm)
B-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
IP20
SUITABILITY
Connector Bodies
G
W
Cord Dia.
Catalog Number
Insulgrip connector body, black and
white nylon. Multiple drive screws.
All black nylon.
.230"-.720"
(5.8-18.3)
.230"-.720"
(5.8-18.3)
.325"-.655"
(8.3-16.6)
HBL4729C
Valise® connector body, black nylon.
G
W
2.78"
(70.6)
Y
15A 125V
15AL5-15R
125V
NEMA
UL/CSA
NEMA
L5-15R
Description
Insulgrip connector body, 8 position
angle, black and white nylon.
Multiple drive screws.
Insulgrip connector body, corrosion
resistant, yellow and white nylon.
Multiple drive screws.
Elastogrip connector body, yellow
elastomer, dust tight.
Elastogrip® connector body, yellow
elastomer, water/dust tight.
Valise® connector body, yellow nylon.
X
G
15A 250V
15AL6-15R
250V
NEMA
UL/CSA
NEMA
L6-15R
HBL4579C
15A 277V AC
15A
AC
NEMA277V
L7-15R
UL/CSA
NEMA
L7-15R
HBL4779C
HBL4729CBK
–
–
HBL4729CA
–
–
1.53"
(38.9)
1.41"
(35.8)
HBL4729C
1.75"
(44.5)
.230"-.720"
(5.8-18.3)
HBL47CM29C HBL45CM79C HBL47CM79C
.300"-.655"
(7.6-16.6)
.300"-.655"
(7.6-16.6)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
HBL2547
–
–
HBL25W47**
–
–
HBL4729VY
HBL4579VY
4.00"
(101.6)
HBL25W47
HBL4779VY
2.59"
(65.8)
HBL4729VBK HBL4579VBK HBL4779VBK
Note: See page B-49 for accessories.
1.50"
(38.1)
Receptacles
Description
Catalog Number
Duplex, flush, brown RTP face, back and side wired.
Duplex, flush, ivory RTP face, back and side wired.
Duplex, ring terminal connection.
Duplex, isolated ground, flush, orange RTP face,
back and side wired.
Duplex, corrosion resistant, yellow RTP face,
back and side wired.
Single, flush, black nylon face, back and side wired.
Same as HBL4760 without mounting screws, ears.
Terminal screws backed out, back and side wired.
Single, ring terminal connection.
Single, isolated ground, flush, orange nylon face,
back and side wired.
Single, black nylon face mounted on a
4" (101.6) round box cover, back and side wired.
Single, panel mount, black nylon face, side wired
only, 1.75" or 1.937" (44.5 or 49.2) mounting centers.
HBL4700*
HBL4700I*
HBL4700RT*
IG4700A*
HBL47CM00*
HBL4550*
–
HBL4550RT*
IG4550A*
HBL4729VY
HBL4750*
–
–
–
–
–
HBL4710
–
HBL4560
–
HBL4760
HBL4760C
HBL4710RT
IG4710
HBL4560RT
IG4560
1.70"
(43.2)
3.28"
(83.3)
–
–
2.74"
(69.5)
1.17"
(29.7)
HBL4700
HBL4711
–
HBL4761
HBL4713
HBL4563
HBL4763
Note: See pages B-48 and B-49 for accessories.
1.27"
(32.3)
2.38"
(60.5) 1.38"
(35.1)
Flanged Receptacles
Description
Catalog Number
Insulgrip flanged receptacle, nylon casing,
back wired.
Stainless steel casing, brown phenolic.
Corrosion resistant, stainless steel casing,
yellow melamine.
HBL4715C
HBL4585C
HBL4785C
HBL4715
HBL47CM15
HBL4585
–
HBL4785
–
Note: See pages B-48 and B-49 for accessories.
HP ratings are AC only.
RTP is an abbreviation for reinforced thermoplastic polyester.
See section M for additional information on isolated ground devices.
*Supplied with break-off tabs for split circuit wiring.
**Watertight connector body IP55 suitability when closure plug is
inserted or when installed and used properly with watertight plug.
HBL4710
2.56"
(65.0)
2.19"
(55.6)
1.36"
(34.5)
1.75"
(44.5)
2.31"
(58.7)
3.28"
(83.3)
1.50"
(38.1)
1.94"
(49.3)
.16" (4.1) DIA.
HBL4715
1.69"
(42.9)
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL4715C
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-13
Twist-Lock® Devices
Features and Benefits
Insulgrip® 20 and 30 Amp Plugs and Connector Bodies
Our 20 and 30 amp Insulgrip® plugs and connectors maintain Hubbell’s classic
integrity, solid construction and safety features that make these devices the
“industry standard”.
Insulgrip’s cord gripping design clamps the conductors, not just the cable jacket,
making it the industry’s most powerful cord grip. The restyled cord grips provide
a clean, one-piece look and makes it stronger.
Insulgrip’s design guards against contamination. The nylon body and housing
of the plugs and connectors are resistant to industrial chemicals, solvents
and hydrocarbons. The face of each plug is molded specific to the blade
configuration, eliminating holes that attract debris. And finally, our dust shield
provides additional protection from contamination.
HBL2311
Additional features that make Insulgrip the industry standard are our improved
contacts that provide better terminations, an exclusive double rivet design for
the female contacts and an easy to read identification system.
The Hubbell Twist-Lock® line of plugs and connectors remain the broadest
in the industry. Hubbell has you covered – proven performance, innovation
and selection.
HBL2313
B-14
Housing Design
• Tough ribbed nylon housing for secure
gripping
• Insulated nylon construction to keep
non-current carrying parts from
becoming energized
Internal Design
• Integral dust shield protects wiring
chamber from dust or contaminants.
Single-piece shield/housing eliminates
need for separate step at installation
• Wiring chambers separate and positively
insulate conductors and promote easy
inspection
Cord Range
• Two-part cord grip tightens with two
screws for maximum retention force
• Broad gripping area to accommodate
wide range of cable diameters
Assembly
• Self-threading screws specially
designed for secure assembly
Identification
• Product identification is visible while
device is in use. Markings include
catalog number and ratings printed in
the IEC color scheme on the currentcarrying portion of the device
Contacts
• Improved terminations include #10
multiple drive screws and thicker
.080" clamping nuts
• Funneled holes to permit “straight-in”
conductor insertion
• Contoured binding plates ensures
strong wire retention
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Insulgrip® Standard Locking Receptacles
Twist-Lock® receptacles combine functional design features, unparalleled quality
to deliver pace-setting performance.
The high-impact nylon face of each Hubbell Twist-Lock receptacle has a colored
ring. Keyed to an internationally recognized color coding scheme, this ring
enables mating devices to be matched quickly. It's just one more example of
user-oriented thinking at Hubbell.
The terminals in each Hubbell Twist-Lock receptacle are mechanically and
electrically the finest available. These terminals incorporate unique design
features to contain and hold conductors, including an external back wiring
“wraparound” clamp, a wire restraint recess and more.
The materials used in every receptacle are of the highest quality. The all brass
mounting system provides a safer, lower resistance ground path than those
made of steel. The thick wall base is constructed of an engineered thermoplastic
to offer the benefits of a thermoset, yet with much greater impact resistance.
Hubbell Twist-Lock Receptacles: Voltage color coding on the outside. Proven
designs and quality materials on the inside. Any way you look at them, they are
the standard of the industry.
125V
250V
277V AC
480V AC
600V AC
125/250V
HBL2310
Housing Design
• High-impact, abuse-resistant nylon face
• Glass-Reinforced thermoplastic
polyester base (RTP) has the desirable
characteristics of a thermoset material,
including heat, flame resistance and
dimensional stability. The impact resistance it provides, however, is much
greater than that of a thermoset
Wiring Design
• Wire restraint recess for both back
and side wiring, greatly reduces the
possibility of loosening the terminal
connection
Mounting Strap
• All-brass mounting and grounding
system provides a lower resistance
ground path and greater resistance to
corrosion than steel mounting systems
Terminals
• #10 brass terminal screw provides
greater strength and resistance to
corrosion and stripping
• Anti-rotational clamp has a stop to limit
the amount of cocking when only one
side is used. Accommodates both back
and side wiring
Identification
• Face color coding by voltage facilitates
locating and mating of proper devices
• Boss diameter is 1.562" on 20 and
30A devices for simplifying installation
and accessory selection
Contacts
• One-piece contact with long spring
arm (low stress) and oxide cutting
nibs: prevents stress and overheating
associated with riveted contact and
short spring arms
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-15
Twist-Lock® Devices
Features and Benefits
Watertight Safety-Shroud® Twist-Lock® System
Safety-Shroud
• Virtually eliminates bent and broken plug blades, leading to longer
equipment life.
• Extends life of mating receptacles by eliminating damage caused by
insertion of bent blades.
• Extra protection for personnel by significantly reducing chance of
inadvertent contact with blades when connecting or disconnecting
energized receptacles and connector bodies.
HBL2731SW
• Reduces exposure to arcing when connecting or disconnecting plugs
under load.
• Compliance with California Code of Regulations, Title 8, Article 51,
subsection 2510.7(b), which requires shrouding for devices exceeding
300 volts.
• Lockout/tagout hole allows compliance with OSHA regulation 29 CFR
1910.147.
HBL2733SW
Note: Works with Mechanical Interlocks, see page B-39 for additional information.
B-16
Housing Design
• One-piece, engineered thermoplastic
housing is impact-resistant for heavyduty industrial environments
• Blades are recessed for protection
against bending and breaking
• Closure cap is included for environmental seal when device is not in use
Assembly
• Cord grip screw recess minimizes
screwdriver slippage
• All screws are #10 multiple drive head
Cord Range
• Assorted TPE seal glands can
accommodate a wide range of cord
sizes from #16-3 Type SJ to #8-5
Type S, SO
• Sealing gland and thermoplastic
guard assure sealing when fully
connected
Panel or Box Mount Receptacles
and Inlets
Identification
• Catalog number and color-coded
voltage rating are easily visible even
when in use
• Alignment arrows and lock and unlock
symbols provide a visual indication
that devices are properly connected
Spring-Loaded Cover
®
Wiring Device-Kellems
• High impact, thermoplastic housing for
heavy-duty industrial environments
• Mounting screw recesses minimize
screwdriver slippage
• Accepts all mating NEMA locking plugs
and most connector bodies, allowing
interchangeability with existing devices
• One-step, push-to-close, spring-loaded
cover with latch allows for fast opening
and closing of lift cover
Result: environmental sealing is assured
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Safety-Shroud® Twist-Lock® System
• Mates with most NEMA locking connector bodies.
• Virtually eliminates bent and broken plug blades.
• Provides protection for personnel by reducing chance of inadvertent contact
with blades when connecting or disconnecting energized devices.
• Reduces exposure to arcing when connecting or disconnecting under load.
• Extends life of mating receptacles by eliminating damage caused by
insertion of bent blades.
• Complies with California Code of Regulation, which requires shrouding
for devices exceeding 300 volts.
• Lockout/tagout hole allows compliance to OSHA regulation 29 CFR
1910.147.
• Allows engagement with Mechanical Interlock Enclosure which
virtually prevents make and break under load.
HBL2610SR
HBL2611S
Note: All screws are #10 multiple drive head.
Housing Design
• Impact resistant shroud made of
engineered thermoplastic protects
blades against bending or breaking
Housing Design
• Engineered thermoplastic housing is
impact and corrosion resistant, making
it suitable for heavy-duty industrial
environments
• Accepts conventional NEMA locking
plugs
Safety
• External keying on plug devices allows
quick mating of devices
• Lockout/tagout hole allows
compliance with OSHA regulation
29 CFR 1910.147
Safety-Shroud® Twist-Lock®
Receptacles
• The Safety-Shroud Twist-Lock single gang
receptacles were designed to mount
in virtually all standard and FS/FD type
boxes, allowing easy conversion of
existing NEMA locking receptacles to
Safety-Shroud Twist-Lock receptacles
Identification
• Catalog number and color-coded
voltage rating are visible even when
in use
• Alignment arrows with lock and
unlock symbols provide a visual
indication that devices are properly
connected
Boxes Available
• The semi-flush receptacles install in
(RACO type 242/255) boxes, with ½
raised 2-gang device mount covers
(RACO type 778/841) and a 2-gang
FD type box. Standard 4" and 4¹¹⁄₁₆"
square boxes 2¹⁄₈" deep
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-17
Twist-Lock® Devices
Compatibility and Environmental Protection Chart
Twist-Lock®
Twist-Lock®
Connector Bodies
Receptacles
Watertight SafetyWatertight
Shroud Mechanical
Safety-Shroud Interlock Enclosure
Safety-Shroud
Switched
Enclosure
NEMA
Watertight
Safety-Shroud
Insulgrip
Twist-Lock® Plugs
YES
Type 4X,
Type 12
YES
Type 4X,
Type 12K
YES
Type 1
NO
NO
YES
Type 4X,
Type 12
YES
Type 1
Safety-Shroud
YES
Type 1
YES
Type 1
YES
Type 1
NO
NO
YES
Type 1
YES
Type 1
Insulgrip
YES
Type 1
NO
YES
Type 1
YES
Type 3R
YES
Type 1
YES
Type 1
YES
Type 1
NEMA
NA
NA
NA
NA
NA
NO
YES
Type 1
Watertight Safety-Shroud
NA
NA
NA
NA
NA
YES
Type 4X,
Type 12
YES
Type 1
Watertight Safety-Shroud
Twist-Lock® Inlets
Type
Type
Type
Type
Type
YES
NO
NA
1
3R
4X
12
12K
Indoor
Raintight
Hose-directed water and corrosion resistant
Dust tight, drip-proof without knockouts
Dust tight, drip-proof with knockouts
Interchangeable
Does not interchange
Not Applicable
Note: See Technical section for full description of enclosure types.
Dimensions in Inches (mm)
B-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 250 Volts
2 Pole, 2 Wire, Non-Grounding
1.91"
(48.5)
20A 250V
Plugs
20AL2-20P
250V
NEMA
UL Listed
NEMA
L2-20P
1.53"
(38.9)
2 HP
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7102C
HBL7102C
Note: See page B-49 for accessories.
2.56"
(65.0)
2.19"
(55.6)
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired, polarized. Multiple drive screws.
HBL8815C
1.69"
(42.9)
Note: See page B-48 for accessories.
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL8815C
20A 250V
Connector Bodies
20AL2-20R
250V
NEMA
UL Listed
NEMA
L2-20R
2.78"
(70.6)
2 HP
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7101C
1.53"
(38.9)
1.41"
(35.8)
Note: See page B-49 for accessories.
HBL7101C
Receptacles
Description
Catalog Number
Single, black phenolic.
HBL7210B
Single, mounted on 4" (101.6) round box cover,
black phenolic.
HBL7217B
Note: See pages B-48 and B-49 for accessories.
1.11"
(28.2)
2.38"
(60.5)
1.39"
3.28" (35.3)
(83.3)
2.09"
(53.1)
1.30"
(33.0)
Flanged Receptacles
#6-32 TAP
Description
Catalog Number
Insulgrip nylon casing, back wired. Multiple drive screws.
HBL8809C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL3226
HBL7210B
2.56"
(65.0)
2.19"
(55.6)
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
1.69"
(42.9)
.16"
(4.1)
DIA.
1.72"
(43.7)
HBL8809C
1.75"
(44.5)
2.31"
(58.7)
.16" (4.1) DIA
1.42"
(36.1)
1.88"
(47.8)
1.83"
(46.4)
HBL3226
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-19
Twist-Lock® Devices
20 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
W
X
G
G
Y
20A 125V
Plugs
20A 125V
NEMA
L5-20P
UL/CSA
NEMA
L5-20P
1 HP
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
2.26"
(57.4)
2.04"
(51.8)
20A 277V AC
20A
277V
AC
NEMA
L7-20P
UL/CSA
NEMA
L7-20P
2 HP
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2311SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be used
with the Insulgrip Connector Bodies.
.360"-.930"
(9-24)
HBL2311S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2311
HBL2321
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM11
HBL23CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2311BK
HBL2321BK
–
Cord clamps with removable
inserts. All black nylon.
.360"-.930"
(9-24)
HBL2311EBK
HBL2321EBK
–
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2311VY
Corrosion resistant,
yellow nylon.
.325"-.720"
(8.26-18.3)
HBL23CM11V
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2311VBK
HBL2321SW
IP20
HBL2331SW
SUITABILITY
HBL2321S
HBL2331S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2321S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
IP20
Valise®
2.50"
(63.5)
1.78"
(45.2)
HBL2311VY
IP20
SUITABILITY
HBL2321VY
HBL2331VY
–
–
HBL2321VBK
HBL2331VBK
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
Description
Gray Valox® housing and flange.
Valox®
1.63"
(41.4)
Gray
housing and flange,
reverse service (Not shown).
IP66 SUITABILITY
HBL2325SW
2.88"
(73.2)
.19"
(4.8)
DIA.
120°
120°
UL Type 4x, 12
Catalog Number
HBL2315SW
–
HBL2325SW
HBL2325SWR
HBL2335SW
–
Note: See page B-54 for accessories.
Insulgrip®
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2315
SUITABILITY
HBL2325
HBL2335
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and
Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise® plugs and connectors.
2.09"
(53.1)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.04"
(51.8)
HBL2315
Dimensions in Inches (mm)
HBL2331
Note: See page B-51 for accessories.
2.28"
(57.9)
1.25" R.
(31.8)
SUITABILITY
Note: See page B-51 for accessories.
HBL2311
B-20
2 HP
IP66 SUITABILITY
Safety-Shroud®
HBL2321SW
20A 250V
20A L6-20P
250V
NEMA
UL/CSA
NEMA
L6-20P
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
W
G
W
X
G
G
Y
20A 125V
20A 125V
NEMA
L5-20R
UL/CSA
NEMA
L5-20P
1 HP
Connector Bodies
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2313SW
Insulgrip®
20A 277V AC
20A 250V
20A L6-20R
250V
NEMA
UL/CSA
NEMA
L6-20P
2 HP
20A
AC
NEMA277V
L7-20R
UL/CSA
NEMA
L7-20P
2 HP
UL Type 4x, 12
HBL2323SW
IP20
HBL2333SW
2.56"
(65.0)
4.38"
(111.1)
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2313
HBL2323
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM13
HBL23CM23
–
All black nylon.
.360"-.930"
(9-24)
HBL2313BK
HBL2323BK
–
Cord clamps with removable
inserts. All black nylon.
.360"-.930"
(9-24)
HBL2313EBK
HBL2323EBK
–
HBL2323SW
HBL2333
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2313
Note: See page B-51 for accessories.
2.60"
(66.0)
Valise®
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2313VY
HBL2323VY
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2313VBK
HBL2323VBK
–
1.78"
(45.2)
HBL2333VBK
HBL2313VY
Note: See page B-51 for accessories.
2.69"
(68.3)
Receptacles
Watertight Safety-Shroud®
Description
Gray
Valox®
IP66 SUITABILITY
UL Type 4x, 12
3.75"
(95.3)
Catalog Number
housing and flange, back wired.
HBL2310SW
HBL2320SW
HBL2330SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2310AR
HBL2320AR
HBL2330AR
Gray Valox® surface mounting, one gang, back wired. HBL2310SR
HBL2320SR
HBL2330SR
Gray Valox® semi-flush, two gang, back wired.
HBL2320SR2
HBL2330SR2
HBL2310SR2
HBL2320SW
3.14"
(79.8)
Note: See page B-54 for accessories.
4.57"
(116.1)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2310
HBL2320
Blue nylon face, back and side wired.
HBL2310M7
HBL2320M4
–
Isolated ground, orange nylon face,
back and side wired.
IG2310
IG2320
–
Corrosion resistant, yellow nylon face,
back and side wired.
HBL23CM10
Ring terminal connection.
HBL2310RT
HBL2330
–
2.88"
(73.2)
HBL2320AR
1.58"
(40.1)
–
HBL2320RT
–
Note: See page B-50 for accessories.
Insulgrip®
1.50"
(38.1)
4.56"
(115.8)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2316
HBL2326
HBL2336
2.84"
(72.1)
Note: See page B-50 for accessories.
HBL2320SR
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-21
Twist-Lock® Devices
20 Amp, 125/250, 3Ø 250 and 3Ø 480 Volts AC
3 Pole, 4 Wire, Grounding
X
W
X
G
Y
Y
Watertight Safety-Shroud®
2.94"
(74.7)
4.50"
(114.3)
2.33"
(59.2)
2.21"
(56.1)
G
Z
20A 3Ø 250V AC
20A
3Ø
250V AC
NEMA
L15-20P
UL/CSA
NEMA
L15-20P
3 HP
IP66 SUITABILITY
20A 3Ø 480V AC
20A
3Ø
480V AC
NEMA
L16-20P
UL/CSA
NEMA
L16-20P
5 HP
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2411SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be
used with the Insulgrip
Connector Bodies.
.350"-1.150"
(9-29)
HBL2411S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2411
HBL2421
HBL2431
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM11
HBL24CM21
HBL24CM31
All black nylon.
.350"-1.150"
(9-29)
HBL2411BK
Safety-Shroud®
HBL2421SW
Y
Z
20A 125/250V AC
20A
125/250V
NEMA
L14-20P AC
UL/CSA
NEMA
L14-20P
2 (1) HP
Plugs
X
G
HBL2421SW
IP20
HBL2431SW
SUITABILITY
HBL2421S
HBL2431S
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
HBL2421S
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
IP20
SUITABILITY
–
–
Note: See page B-53 for accessories.
HBL2411
Flanged Inlets
Watertight Safety-Shroud®
2.44"
(62.0)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2415SW
UL Type 4x, 12
HBL2425SW
HBL2435SW
Note: See page B-54 for accessories.
3.75"
(95.3)
Insulgrip®
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2415
SUITABILITY
HBL2425
HBL2435
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
HBL2425SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.23"
(56.6)
HBL2415
Dimensions in Inches (mm)
B-22
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 125/250, 3Ø 250 and 3Ø 480 Volts AC
X
3 Pole, 4 Wire, Grounding
G
Connector Bodies
X
G
W
X
Y
Y
Z
20A 125/250V AC
20A
125/250V
AC
NEMA
L14-20R
NEMA
L14-20R
UL/CSA
20A
3Ø L15-20R
250V AC
NEMA
UL/CSA
NEMA
L15-20R
2 (1) HP
Watertight Safety-Shroud®
Description
Cord Dia.
Catalog Number
.350"-1.150"
(9-29)
HBL2413SW
Insulgrip®
20A 3Ø 480V AC
20A
3Ø L16-20R
480V AC
NEMA
UL/CSA
NEMA
L16-20R
3 HP
5 HP
UL Type 4x, 12
HBL2423SW
IP20
Y
Z
20A 3Ø 250V AC
IP66 SUITABILITY
Black Valox® housing,
white Valox® clamps.
G
HBL2433SW
2.75"
(69.9)
4.38"
(111.1)
SUITABILITY
HBL2423SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2413
HBL2423
HBL2433
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM13
HBL24CM23
HBL24CM33
All black nylon.
.350"-1.150"
(9-29)
HBL2413BK
–
–
3.86"
(98.0)
2.33"
(59.2 )
2.21"
(56.1)
Note: See page B-53 for accessories.
Receptacles
HBL2413
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2410SW
UL Type 4x, 12
HBL2420SW
2.91"
(73.9)
HBL2430SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2410AR
Gray
Valox®
surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
SUITABILITY
HBL2420AR
3.75"
(95.3)
HBL2430AR
HBL2410SR
HBL2420SR
HBL2430SR
HBL2410SR2
HBL2420SR2
HBL2430SR2
3.75"
(95.3)
Note: See page B-54 for accessories.
1.75"
(44.5)
HBL2420SW
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2410
HBL2420
Isolated ground, orange nylon face,
back and side wired.
IG2410
IG2420
–
Ring terminal connection.
HBL2410RT
HBL2420RT
–
3.14"
(79.8)
HBL2430
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2416
HBL2426
2.85"
(72.4)
HBL2436
HBL2420AR
Note: See page B-52 for accessories.
3.06"
(77.7)
1.70"
(43.2)
120°
1.23"
(31.2)
1.71"
(43.4)
.77"
(19.6)
1.34" R
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
5.12"
(130.0)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2416
#6-32
TAP
HBL2410
.98"
(24.9)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
5.12"
(130.0)
2.84"
(72.1)
HBL2420SR2
HBL2420SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-23
Twist-Lock® Devices
20 Amp, 347, 480, 600 and 125/250 Volts AC
2 Pole, 3 Wire, Grounding and 3 Pole, 3 Wire, Non-Grounding
X
IP20
2.26"
(57.4)
G
Y
20A 347V AC
NEMA347V
L24-20P
20A
AC
UL/CSA
NEMA
L24-20P
Plugs
1.97"
(50.0)
G
W
SUITABILITY
2.75"
(69.9)
X
G
Y
20A 480V AC
NEMA
L8-20P
20A
480V
AC
UL/CSA
NEMA
L8-20P
3 HP
20A 600V AC
NEMA
L9-20P
20A
600V
AC
UL/CSA
NEMA
L9-20P
20A 125/250V AC
NEMA
L10-20PAC
20A
125/250V
UL/CSA
NEMA
2 (1)L10-20P
HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3721
HBL2341
HBL2351
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2361
HBL2355
HBL2365
Note: See page B-51 for accessories.
HBL2341
2.88"
(73.2)
Flanged Inlets
120°
1.25" R.
(31.8)
.19" 120°
(4.8)
DIA.
Description
Catalog Number
Nylon casing, back wired.
HBL3725
HBL2345
G
G
Note: See page B-50 for accessories.
2.09"
(53.1)
SUITABILITY
2.04"
(51.8)
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
1.23"
(31.2)
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
3 HP
20A 600V AC
20A
600V
AC
NEMA
L9-20R
UL/CSA
NEMA
L9-20R
20A 125/250V AC
20A
125/250V
NEMA
L10-20RAC
UL/CSA
NEMA
L10-20R
2 (1) HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3723
HBL2343
HBL2353
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2363
HBL2340
Note: See page B-51 for accessories.
Description
Catalog Number
Black nylon face, back and side wired.
HBL3720
HBL2350
HBL2360
Watertight Safety-Shroud®,
gray Valox® housing and flange,
back and side wired, (Not shown).
–
HBL2340SW
–
–
Isolated ground, orange nylon face,
back and side wired.
–
IG2340
–
–
HBL2356
HBL2366
Note: See page B-50 for accessories.
Flanged Receptacles
#6-32 TAP
.98"
(24.9)
HBL2340
2.88"
(73.2)
Y
Y
20A 480V AC
20A
480V
AC
NEMA
L8-20R
UL/CSA
NEMA
L8-20R
Single Flush Receptacles
HBL2343
1.70"
(43.2)
G
W
20A 347V AC
20A
AC
NEMA347V
L24-20R
UL/CSA
NEMA
L24-20R
Connector Bodies
HBL2345
X
X
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL3726
HBL2346
Note: See page B-50 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
120°
1.25" R.
(31.8)
120°
.19"
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
HBL2346
Dimensions in Inches (mm)
B-24
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire, Non-Grounding
X
IP20
SUITABILITY
W
Y
X
W
Y
W
Z
Z
20A 3ØY
20A 3ØY
120/208V
120/208V
AC AC
NEMA
L18-20P
NEMA
L18-20P
Plugs
X
Y
UL Listed
2 HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2441
Z
20A 3ØY
20A 3ØY
20A
277/480V
277/480V
AC AC
NEMA L19-20P
NEMA
L19-20P
2.75"
(69.9)
20A
347/600V
347/600V
AC AC
NEMA L20-20P
NEMA
L20-20P
UL Listed
UL Listed
5 HP
HBL2451
HBL2461
2.33"
(59.2)
2.21"
(56.1)
Note: See page B-53 for accessories.
Flanged Inlets
HBL2441
Description
Catalog Number
Nylon casing, back wired.
HBL2445
HBL2455
HBL2465
3.06"
(77.7)
Note: See page B-52 for accessories.
120°
1.34" R.
(34.0)
X
IP20
X
Y
W
Z
SUITABILITY
20A 3ØY
Connector Bodies
120/208V
AC AC
20A 3ØY
120/208V
NEMA
L18-20R
NEMA
L18-20P
UL Listed
2 HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2443
W
X
Y
W
Z
Y
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
Z
20A 3ØY
277/480V
AC AC
20A
277/480V
NEMA L19-20R
NEMA
L19-20P
UL Listed
20A 3ØY
2.23"
(56.6)
UL Listed
HBL2445
20A
347/600V
347/600V
AC AC
NEMA L20-20R
NEMA
L20-20P
5 HP
HBL2453
HBL2463
Note: See page B-53 for accessories.
2.33"
(59.2)
Single Flush Receptacles
Description
Catalog Number
Black nylon face,
back and side wired.
HBL2440
HBL2450
2.21"
(56.1)
HBL2460
3.86"
(98.0)
HBL2443
Note: See page B-52 for accessories.
Flanged Receptacles
1.70"
(43.2)
Description
Catalog Number
Nylon casing, back wired.
HBL2446
HBL2456
1.23"
(31.2)
HBL2466
Note: See page B-52 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
#6-32 TAP
.98"
(24.9)
HBL2440
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2446
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-25
Twist-Lock® Devices
20 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire, Grounding
X
Y
Watertight Safety-Shroud®
4.50"
(114.3)
Y
G
W
Z
Z
20A 3ØY
20A 3ØY
20A 3ØY
2 HP
5 HP
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2511SW
Cord Dia.
Catalog Number
Black and white nylon body,
.350"-1.150"
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
HBL2511S
UL Type 4x, 12
–
IP20
Description
2.33"
(59.3)
G
W
Z
Safety-Shroud®
HBL2511SW
2.21"
(56.1)
G
Y
120/208V
AC AC 20A 277/480V
AC AC 20A347/600V
AC
20A 3ØY
120/208V
3ØY 277/480V
3ØY 347/600V
AC
NEMA L21-20P
NEMA L22-20P
NEMA L23-20P
NEMAUL/CSA
L21-20P
NEMA
L22-20P
NEMA
L23-20P
UL/CSA
UL/CSA
Plugs
2.94"
(74.7)
X
X
W
–
SUITABILITY
–
–
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
HBL2511S
2.75"
(69.8)
2.33"
(59.2)
2.21"
(56.1)
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2511
All black nylon.
.350"-1.150"
(9-29)
HBL2511BK
–
–
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL25CM11
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2511FC
–
–
HBL2521
HBL2531
Note: See page B-53 for accessories.
HBL2511
2.44"
(62.0)
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2515SW
UL Type 4x, 12
–
–
Note: See page B-52 for accessories.
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2515
SUITABILITY
HBL2525
HBL2535
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
HBL2515SW
3.06"
(77.7)
120°
Twist-Lock® 3-Phase Circuit Tester
1.34" R.
(34.0)
.19"
(4.8)
DIA.
Insulgrip®
120°
2.27"
(57.7)
Description
Rating
Catalog Number
3-Phase Circuit Tester
3Ø 120/208V AC
Min. Voltage: 90V AC
HBL3PT2511
–
–
Note: Testers in other NEMA configurations can be developed upon request.
2.23"
(56.6)
HBL2515
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
HBL3PT2511
Dimensions in Inches (mm)
B-26
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire, Grounding
X
W
Y
G
Y
20A 3ØY
20A 3ØY
20A 3ØY
2 HP
5 HP
IP66 SUITABILITY
.350"-1.150"
(9-29)
HBL2513SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
HBL2513
Insulgrip®
UL Type 4x, 12
–
IP20
Corrosion resistant,
yellow nylon.
Black and white for flat cable.
W
Z
Catalog Number
All black nylon.
Y
Z
Cord Dia.
Black
housing,
white Valox® clamps.
X
G
Z
Watertight Safety-Shroud®
Valox®
X
W
120/208V AC
277/480V AC
347/600V
AC
20ANEMA
3ØY L21-20R
120/208V AC 20A
3ØYL22-20R
277/480V AC 20A
3ØY 347/600V
AC
NEMA
NEMA L23-20R
NEMA
L21-20R
NEMA
L22-20R
NEMA
L23-20R
UL/CSA
UL/CSA
UL/CSA
Connector Bodies
Description
G
2.75"
(69.9)
–
4.38"
(111.1)
SUITABILITY
HBL2513SW
HBL2523
HBL2533
HBL2513BK
–
–
HBL25CM13
–
–
HBL2513FC
–
–
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
Note: See page B-53 for accessories.
HBL2513
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2510SW
2.91"
(73.9)
UL Type 4x, 12
–
–
3.75"
(95.3)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2510AR
HBL2510SR
HBL2510SR2
SUITABILITY
–
–
–
–
–
–
HBL2510SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
HBL2510
IG2510
1.75"
(44.5)
3.75"
(95.3)
SUITABILITY
3.14"
(79.8)
HBL2520*
–
HBL2530*
–
4.57"
(116.1)
Note: *Not Fed Spec.
See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2516
HBL2526
2.88"
(73.2)
HBL2536
Note: See page B-52 for accessories.
HBL2510AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
5.12"
(130.0)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
#6-32 TAP
5.12"
(130.0)
.98"
(24.9)
HBL2516
Valox®
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
1.71"
(43.4)
.77"
(19.6)
HBL2510
HBL2510SR2
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
2.84"
(72.1)
HBL2510SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-27
Twist-Lock® Devices
30 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
X
W
G
G
Y
30A 125V
Plugs
NEMA
30A L5-30P
125V
UL/CSA
NEMA
L5-30P
2 HP
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
HBL2611SW
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.325"-.930"
(9-24)
HBL2611SW
Safety-Shroud®
Description
2.26"
(57.4)
2.04"
(51.8)
30A 250V
NEMA
30AL6-30P
250V
UL/CSA
NEMA
L6-30P
2 HP
IP20
Cord Dia.
Black and white nylon body,
.360"-.930"
white Valox® shroud. Can be used (9-24)
with the Insulgrip Connector Bodies.
30A 277V AC
NEMA
L7-30P
30A 277V
AC
UL/CSA
NEMA
L7-30P
3 HP
UL Type 4x, 12
HBL2621SW
–
HBL2621S
–
SUITABILITY
Catalog Number
HBL2611S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2621S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL2621
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2611
HBL2621
Heat stabilized, gray nylon,
220° F (104° C).
.360"-.930"
(9-24)
HBL2611F
HBL2621F
–
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
HBL26CM11
HBL26CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2611BK
HBL2621BK
–
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
HBL2611VY
Corrosion resistant, yellow nylon.
.590"-.930"
(15.0-23.6)
HBL26CM11V
Black nylon.
.590"-.930"
(15.0-23.6)
HBL2611VBK
HBL2631
Note: See page B-51 for accessories.
Valise®
2.50"
(63.5)
1.78"
(45.2)
HBL2611VY
IP20
SUITABILITY
HBL2621VY
–
–
–
HBL2621VBK
–
Note: See page B-51 for accessories.
2.28"
(57.9)
Flanged Inlets
3.75"
(95.3)
Watertight Safety-Shroud®
1.63"
(41.4)
3.75"
(95.3)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2615SW
Reverse service, gray Valox® housing
and flange (use with HBL2613SR),
(Not shown).
HBL2615SWR
Insulgrip®
2.88"
(73.2)
120°
1.25" R.
(31.8)
2.09"
(53.1)
2.04"
(51.8)
HBL2625SW
–
–
–
Note: See page B-54 for accessories.
HBL2615SW
.19"
(4.8) 120°
DIA.
UL Type 4x, 12
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2615
HBL2625
Heat stabilized, gray nylon, 220° F (104° C).
HBL2615F
HBL2625F
–
Nylon casing, weather protective, die cast
aluminum, back wired, self closing lift cover.
HBL2615M3
–
–
HBL2635
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise plugs and connectors.
HBL2625
Dimensions in Inches (mm)
B-28
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire, Grounding
X
W
G
W
G
G
Y
30A 125V
NEMA
L5-30R
30A 125V
UL/CSA
NEMA
2L5-30P
HP
Connector Bodies
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2615SWR), (Not shown).
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613SW
HBL2613SR
Insulgrip®
30A 277V AC
NEMA277V
L7-30R
30A
AC
UL/CSA
NEMA
L7-30P
3 HP
30A 250V
NEMA
L6-30R
30A 250V
UL/CSA
NEMA
L6-30P
2 HP
UL Type 4x, 12
HBL2623SW
–
–
IP20
3.86"
(98.0)
Cord Dia.
Catalog Number
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613
HBL2623
HBL2613F
HBL2623F
–
HBL26CM13
HBL26CM23
–
HBL2613BK
HBL2623BK
–
HBL2633
Note: See page B-51 for accessories.
IP20
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
HBL2613VY
Corrosion resistant,
yellow nylon.
Black nylon.
HBL26CM13V
HBL2613VBK
HBL2613SW
SUITABILITY
Black and white nylon.
Valise®
4.38"
(111.1)
–
Description
Heat stabilized, gray nylon,
220° F (104° C).
Corrosion resistant,
yellow nylon.
All black nylon.
2.56"
(65.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2623
2.60"
(66.0)
1.78"
(45.2)
SUITABILITY
HBL2623VY
–
HBL2613VY
–
–
2.69"
(68.3)
HBL2623VBK
–
3.75"
(95.3)
Note: See page B-51 for accessories.
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2610SW
UL Type 4x, 12
HBL2620SW
3.75"
(95.3)
–
HBL2610SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2610AR
HBL2610SR
HBL2610SR2
3.14"
(79.8)
SUITABILITY
HBL2620AR
HBL2620SR
HBL2620SR2
1.50"
(38.1)
–
–
–
4.57"
(116.1)
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
Blue nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
Corrosion resistant, yellow nylon face,
back and side wired.
Ring terminal connection.
HBL2610
HBL2610M6
IG2610
HBL2620
HBL2620M6
IG2620
HBL2630
–
–
HBL26CM10
HBL26CM20
–
HBL2610RT
HBL2620RT
–
Note: See page B-50 for accessories.
2.88"
(73.2)
HBL2620AR
1.58"
(40.1)
4.56"
(115.8)
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
Heat stabilized, gray nylon, 220° F (104° C).
HBL2616
HBL2616F
HBL2626
HBL2626F
HBL2636
–
2.84"
(72.1)
Note: See page B-50 for accessories.
Valox®
HBL2620SR
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-29
Twist-Lock® Devices
30 Amp, 125/250 and 3Ø 250 Volts AC
3 Pole, 3 Wire, Non-Grounding and 3 Pole, 4 Wire, Grounding
X
X
W
G
Y
G
Z
Y
30A 125/250V AC
Plugs
30ANEMA
125/250V
L10-30PAC
UL/CSA
NEMA
L10-30P
Watertight Safety-Shroud®
2.94"
(74.7)
HBL2711SW
4.50"
(114.3)
Description
Cord Dia.
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
30A 125/250V AC
30A
125/250V
NEMA
L14-30PAC
UL/CSA
NEMA
L14-30P
2 (2) HP
IP66 SUITABILITY
–
HBL2711SW
IP20
Cord Dia.
Black and white nylon body,
.350"-1.150"
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
3 HP
UL Type 4x, 12
Catalog Number
Safety-Shroud®
Description
30A 3Ø 250V AC
30A
3Ø L15-30P
250V AC
NEMA
UL/CSA
NEMA
L15-30P
HBL2721SW
SUITABILITY
Catalog Number
–
HBL2711S
HBL2721S
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
Insulgrip®
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
HBL2711S
All black nylon.
2.75"
(69.9)
SUITABILITY
Catalog Number
–
HBL2711
HBL2661
HBL2721
–
–
–
HBL27CM11
–
HBL2711BK
HBL27CM21
–
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
HBL2711
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange.
Reverse service, gray Valox® housing and
flange (use with HBL2713SR), (Not shown).
–
–
HBL2715SW
HBL2715SWR
HBL2725SW
–
Note: See page B-54 for accessories.
2.44"
(62.0)
Insulgrip®
3.75"
(95.3)
1.81"
(46.0)
IP20
Description
Catalog Number
Nylon casing, back wired.
Nylon casing, back wired, (Not shown).
–
HBL2665
Nylon casing, weather protective, die cast aluminum,
back wired, self closing lift cover.
–
SUITABILITY
HBL2715
–
HBL2715M3
HBL2725
–
–
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
3.75"
(95.3)
HBL2715SW
.87"
(22.1)
1.47"
(37.3)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
4.56"
(115.8)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles and reverse
service inlet, see page B-39.
2.27"
(57.7)
2.82"
(71.6)
2.23"
(56.6)
HBL2715M3
HBL2715
Dimensions in Inches (mm)
B-30
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 125/250 and 3Ø 250 Volts AC
3 Pole, 3 Wire, Non-Grounding and
3 Pole, 4 Wire, Grounding
X
G
X
W
Y
G
Y
30A 125/250V AC
30A 125/250V AC
Connector Bodies
30A
125/250V
NEMA
L10-30RAC
UL/CSA
NEMA
L10-30R
Watertight Safety-Shroud®
Description
Cord Dia.
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
3 HP
UL Type 4x, 12
Catalog Number
–
HBL2713SW
–
HBL2713SR
HBL2723SW
2.75"
(69.9)
–
4.38"
(111.1)
HBL2713SW
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
All black nylon.
30A
3ØL15-30R
250V AC
NEMA
UL/CSA
NEMA
L15-30R
2 (2) HP
Insulgrip®
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
30A 3Ø 250V AC
30A
125/250V
NEMA
L14-30RAC
UL/CSA
NEMA
L14-30R
IP66 SUITABILITY
Black Valox® housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2715SWR), (Not shown).
Z
SUITABILITY
Catalog Number
–
HBL2713
HBL2663
HBL2723
–
2.33"
(59.2)
–
–
HBL27CM13
–
HBL2713BK
2.21"
(56.1)
HBL27CM23
3.86"
(98.0)
–
HBL2713
Note: See page B-53 for accessories.
Receptacles
Watertight
Safety-Shroud®
IP66 SUITABILITY
Description
2.91"
(73.9)
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange, back wired.
–
HBL2710SW
HBL2720SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
3.75"
(95.3)
SUITABILITY
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
–
–
–
HBL2710AR
HBL2710SR
HBL2710SR2
HBL2720AR
HBL2720SR
HBL2720SR2
1.75"
(44.5)
3.75"
(95.3)
HBL2710SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Black nylon face, back and side wired, (Not shown).
Isolated ground, orange nylon face,
back and side wired.
Ring terminal connection.
–
HBL2660
–
–
3.14"
(79.8)
SUITABILITY
HBL2710
–
IG2710
HBL2720
–
IG2720
HBL2710RT
HBL2720RT
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
2.88"
(73.2)
Catalog Number
–
Nylon casing, back wired.
HBL2716
HBL2726
HBL2710AR
Note: See page B-52 for accessories.
3.06"
(77.7)
1.70"
(43.2)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
1.71"
(43.4)
.77"
(19.6)
4.56"
(115.8)
5.12"
(130.0)
2.27"
(57.7)
2.23"
(56.6)
HBL2716
HBL2710
HBL2710SR2
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
2.84"
(72.1)
5.12"
(130.0)
.98"
(24.9)
#6-32
TAP
HBL2710SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-31
Twist-Lock® Devices
30 Amp, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire, Grounding
Plugs
Watertight Safety-Shroud®
2.94"
(74.7)
HBL2731SW
G
G
Y
Z
Z
30A 3Ø 480V AC
30A
3ØL16-30P
480V AC
NEMA
UL/CSA
NEMA
L16-30P
10 HP
30A 3Ø 600V AC
30A
3ØL17-30P
600V AC
NEMA
UL/CSA
NEMA
L17-30P
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2731SW
Description
Cord Dia.
Catalog Number
Black and white nylon body, white Valox® shroud.
Can be used with the Insulgrip Connector Bodies.
.350"-1.150"
(9-29)
HBL2731S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2731
HBL2741
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM31
HBL27CM41
Safety-Shroud®
4.50"
(114.3)
X
X
Y
IP20
HBL2741SW
SUITABILITY
HBL2741S
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
Insulgrip®
HBL2731S
IP20
SUITABILITY
Note: See page B-53 for accessories.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
HBL2731
IP66 SUITABILITY
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange.
HBL2735SW
HBL2745SW
Note: See page B-54 for accessories.
2.44"
(62.0)
Insulgrip®
3.75"
(95.3)
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2735
HBL2745
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
1.81"
(46.0)
3.75"
(95.3)
HBL2735SW
3.06"
(77.7)
120°
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2735
Dimensions in Inches (mm)
B-32
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire, Grounding
X
X
G
Connector Bodies
Watertight Safety-Shroud®
G
Y
Y
Z
Z
30A 3Ø 480V AC
30A
3ØL16-30R
480V AC
NEMA
UL/CSA
NEMA
L16-30R
10 HP
30A 3Ø 600V AC
30A
3ØL17-30R
600V AC
NEMA
UL/CSA
NEMA
L17-30R
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2733SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2733
HBL2743
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM33
HBL27CM43
Insulgrip®
IP20
HBL2743SW
2.75"
(69.9)
SUITABILITY
4.38"
(111.1)
HBL2733SW
3.86"
(98.0)
Note: See page B-53 for accessories.
2.33"
(59.3)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
2.21"
(56.1)
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2730SW
HBL2733
HBL2740SW
2.91"
(73.9)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
SUITABILITY
3.75"
(95.3)
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2730AR
HBL2740AR
Gray Valox® surface mounting, one gang, back wired.
HBL2730SR
HBL2740SR
HBL2730SR2
HBL2740SR2
Gray
Valox®
semi-flush, two gang, back wired.
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2730
1.75"
(44.5)
HBL2730SW
HBL2740
3.14"
(79.8)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2736
4.57"
(116.1)
HBL2746
Note: See page B-52 for accessories.
2.88"
(73.2)
HBL2730AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
.77"
(19.6)
1.23"
(31.2)
5.12"
(130.0)
1.71"
(43.4)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2736
Valox®
#6-32
TAP
5.12"
(130.0)
.98"
(24.9)
HBL2730SR2
HBL2730
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
2.84"
(72.1)
HBL2730SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-33
Twist-Lock® Devices
30 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire, Grounding
W
X
Y
G
X
Plugs
Watertight Safety-Shroud®
4.50"
(114.3)
HBL2811SW
30A 3ØY
30A 3ØY
120/208V
AC
NEMA
L21-30P
120/208V
AC
UL/CSA
NEMA
L21-30P
3 HP
IP66 SUITABILITY
Black Valox® housing,
white Valox® clamps.
.350"-1.150" HBL2811SW HBL2801
(9-29)
2.33"
(59.3)
Y
30A 3ØY
30A 3ØY
277/480V
AC
NEMA
L22-30P
277/480V
AC
UL/CSA
NEMA
L22-30P
10 HP
W
G
Z
30A 3ØY
30A 3ØYAC
347/600V
NEMA
L23-30P
347/600V
AC
UL/CSA
NEMA
L23-30P
UL Type 4x, 12
Catalog Number
Safety-Shroud®
2.21"
(56.1)
X
W
Z
30A 3ØY
30A 3ØY
240/415V
AC
240/415V
AC
NEMA
L26-30P
UL/CSA
NEMA
L26-30P
Cord Dia.
HBL2821SW HBL2831SW
IP20
Cord Dia.
G
Y
Description
Description
Y
G
Z
2.94"
(74.7)
X
Z
W
SUITABILITY
Catalog Number
Black and white nylon body, white .350"-1.150" HBL2811S
Valox® shroud. Can be used with (9-29)
the Insulgrip Connector Bodies.
–
–
–
Note: See page B-40 for accessories.
4.12"
(104.6)
Insulgrip®
HBL2811S
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL2811
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150" HBL2811
(9-29)
SUITABILITY
Catalog Number
–
Corrosion resistant, yellow nylon. .350"-1.150" HBL28CM11
(9-29)
HBL2821
HBL2831
–
–
–
Black and white for flat cable.
.350"-1.150" HBL2811FC
(9-29)
–
–
–
All black nylon.
.350"-1.150" HBL2811BK
(9-29)
–
–
–
Note: See page B-53 for accessories.
2.44"
(62.0)
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2815SW HBL2805
UL Type 4x, 12
–
–
Note: See page B-54 for accessories.
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2815
–
SUITABILITY
HBL2825
HBL2835
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
HBL2815SW
3.06"
(77.7)
120°
Twist-Lock® 3-Phase Circuit Tester
1.34" R.
(34.0)
.19"
(4.8)
DIA.
Insulgrip®
Description
Rating
Catalog Number
3-Phase Circuit Tester
3Ø 120/208V AC
Min. Voltage: 90V AC
HBL3PT2811
120°
2.27"
(57.2)
–
–
–
Note: See page B-52 for additional circuit testers.
Testers in other NEMA configurations can be developed upon request.
2.23"
(56.6)
HBL2815
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
HBL3PT2811
Dimensions in Inches (mm)
B-34
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire, Grounding
X
W
G
G
Watertight
30A 3ØY
30A 3ØYAC
120/208V
NEMA
L21-30R
120/208V
AC
UL/CSA
NEMA3 L21-30R
HP
Safety-Shroud®
W
X
G
30A 3ØY
30A 3ØYAC
240/415V
NEMA
L26-30P
240/415V
AC
UL/CSA
NEMA L26-30R
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2813SW HBL2803
Insulgrip®
X
W
Y
30A 3ØY
30A 3ØYAC
277/480V
NEMA
L22-30R
277/480V
AC
UL/CSA
NEMA
10L22-30R
HP
30A 3ØY
30A 3ØYAC
347/600V
NEMA
L23-30R
347/600V
AC
UL/CSA
2.75"
(69.9)
NEMA L23-30R
UL Type 4x, 12
4.38"
(111.1)
HBL2813SW
–
2.33"
(59.3)
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2813
–
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL28CM13
–
–
–
Black and white for flat cable. .350"-1.150"
(9-29)
HBL2813FC
–
–
–
All black nylon.
HBL2813BK
–
–
–
.350"-1.150"
(9-29)
Y
Z
HBL2823SW
IP20
G
Z
Y
Z
Connector Bodies
X
W
Z
Y
HBL2823
2.21"
(56.1)
HBL2833
3.86"
(98.0)
HBL2813
2.91"
(73.9)
3.75"
(95.3)
Note: See page B-53 for accessories.
Receptacles
Watertight Safety-Shroud®
Description
Gray
Valox®
IP66 SUITABILITY
HBL2810SW
Catalog Number
housing and flange, back wired. HBL2810SW
1.75"
(44.5)
3.75"
(95.3)
UL Type 4x, 12
–
3.14"
(79.8)
HBL2820SW HBL2830SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
SUITABILITY
4.57"
(116.1)
Description
Catalog Number
Gray Valox® angle housing,
one gang, back wired.
HBL2810AR
–
–
–
Gray Valox® surface mounting,
one gang, back wired.
HBL2810SR
–
–
–
Gray Valox® semi-flush,
two gang, back wired.
HBL2810SR2
–
–
–
2.88"
(73.2)
HBL2810AR
Note: See page B-54 for accessories.
1.71"
(43.4)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and
side wired.
HBL2810
Isolated ground, orange nylon face,
back and side wired.
IG2810
–
–
–
Ring terminal connection.
HBL2810RT
–
–
–
HBL2800
HBL2820
4.56"
(115.8)
HBL2830
2.84"
(72.1)
Note: See page B-52 for accessories.
HBL2810SR
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2816
.77"
(19.6)
–
HBL2826
HBL2836
Note: See page B-52 for accessories.
5.12"
(130.0)
5.12"
(130.0)
HBL2810SR2
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-35
Twist-Lock® Devices
30 Amp, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire, Non-Grounding
IP20
SUITABILITY
X
Y
X
W
30A 3ØY
Plugs
2.33"
(59.2)
2.21"
(56.1)
W
Y
Z
Z
Z
2.75"
(69.9)
X
W
Y
30A 3ØY
120/208V
120/208V
AC AC
NEMAL18-30P
L18-30P
NEMA
UL Listed
Description
Cord Dia.
3 HP
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2751
30A 3ØY
30A 3ØY
277/480V
277/480V
AC AC
NEMA L19-30P
L19-30P
NEMA
UL Listed
10 HP
30A 3ØY
30A 347/600V
3ØY 347/600V
AC AC
NEMA L20-30P
NEMA
L20-30P
UL Listed
HBL2761
HBL2771
HBL2765
HBL2775
Note: See page B-53 for accessories.
HBL2751
Flanged Inlets
3.06"
(77.7)
120°
Description
Catalog Number
Nylon casing, back wired.
HBL2755
Note: See page B-52 for accessories.
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
X
IP20
SUITABILITY
2.23"
(56.6)
3.86"
(98.0)
Z
30A 3ØY
120/208V
AC AC
30A 3ØY
120/208V
NEMA L18-30R
NEMA
ULL18-30P
Listed
Connector Bodies
HBL2755
X
X
Y
W
3 HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2753
W
Y
Z
30A 3ØY
277/480V
AC AC
30A 3ØY
277/480V
NEMA L19-30P
L19-30R
NEMA
UL Listed
10 HP
W
Y
Z
30A 3ØY
AC AC
30A 347/600V
3ØY 347/600V
NEMA L20-30R
NEMA
L20-30P
UL Listed
HBL2763
HBL2773
HBL2760
HBL2770
HBL2766
HBL2776
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Single Flush Receptacles
HBL2753
1.70"
(43.2)
1.23"
(31.2)
Description
Catalog Number
Black nylon face, back and side wired.
HBL2750
Note: See page B-52 for accessories.
Flanged Receptacles
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
HBL2750
#6-32 TAP
.98"
(24.9)
Description
Catalog Number
Nylon casing, back wired.
HBL2756
Note: See page B-52 for accessories.
See page B-69 for technical information on Twist-Lock devices.
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2756
Dimensions in Inches (mm)
B-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 480 and 600 Volts AC
2 Pole, 3 Wire, Grounding
G
G
G
X
SUITABILITY
Y
Y
Y
30A 240V AC
NEMA
L25-30P
30A 240V
AC
UL/CSA
NEMA
L25-30P
Plugs
X
X
IP20
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2601
30A 480V AC
NEMA
L8-30P
30A
480V
AC
UL/CSA
NEMA
L8-30P
5 HP
HBL2641
30A 600V AC
2.75"
(69.9)
NEMA
L9-30P
30A
600V
AC
UL/CSA
NEMA L9-30P
HBL2651
2.26"
(57.4)
1.97"
(50.0)
Note: See page B-51 for accessories.
HBL2651
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired.
HBL2605
HBL2645
2.88"
(73.2)
HBL2655
120°
Note: See page B-50 for accessories.
1.25" R.
(31.8)
120°
G
IP20
X
Y
30A 240V AC
30A 240V
AC
NEMA
L25-30R
NEMA
L25-30R
UL/CSA
Connector Bodies
X
X
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2603
2.09"
(53.1)
G
G
SUITABILITY
.19"
(4.8)
DIA.
Y
Y
30A 480V AC
NEMA
L8-30R
30A
480V
AC
UL/CSA
NEMA
L8-30R
5 HP
HBL2643
2.04"
(51.8)
30A 600V AC
NEMA
L9-30R
30A
600V
AC
UL/CSA
NEMA
L9-30R
HBL2655
HBL2653
3.86"
(98.0)
Note: See page B-51 for accessories.
2.26"
(57.4)
1.97"
(50.0)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back and side wired.
HBL2600
HBL2653
HBL2640
HBL2650
Note: See page B-50 for accessories.
1.70"
(43.2)
1.23"
(31.2)
Flanged Receptacles
Description
Nylon casing, back wired.
Catalog Number
–
HBL2646
HBL2656
Note: See page B-50 for accessories.
See page B-69 for technical information on Twist-Lock devices.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
#6-32 TAP
.98"
(24.9)
HBL2650
2.88"
(73.2)
120°
1.25" R.
(31.8)
.19"
(4.8)
DIA.
120°
2.09"
(53.1)
2.04"
(51.8)
HBL2656
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-37
Twist-Lock® Devices
Features and Benefits
Switched Safety Enclosures
The Switched Twist-Lock® and Hubbellock® Enclosures integrate a receptacle
and a switch to produce distinct advantages for the user. This enclosure replaces
box, switch, cover and all in a compact design that meets Type 3R Rainproof or
12K Dust-tight requirements.
The receptacle is angled downward for a low profile, and it maintains a low profile
while accommodating either a 20 or 30 Amp Twist-Lock receptacle or 30 Amp,
4 wire Hubbellock receptacle. The enclosure can be used in top, bottom or back
feed applications. The handle is designed to be locked in the OFF position for
lockout protection.
Hubbell has developed the Switched Safety Enclosure because users want to be
able to disconnect higher voltage devices confidently. Hubbell responded with a
line of Switched Safety Enclosures for Twist-Lock and Hubbellock receptacles.
The provision of the integral switch and the receptacle in a compact, non-metallic
enclosure encourages the safe operating practice of disconnecting at the switch
rather than the plug and receptacle.
For plants and factories in a wide variety of industries, as well as light industrial
facilities, Hubbell’s Switched Enclosures offer an upgrade that’s convenient,
compact and easy to install.
SETL3
Housing Design
• Angled 20 or 30 amp Hubbell TwistLock receptacle provides low profile
and helps control cable arc of bend
• Large receptacle gasketless door
and hinge assembly
• Enclosure back is designed for top,
bottom or back feed options
Internal Design
• Horsepower rated switch
• Heavy-duty internal frame bonds conduit
and all grounds and has a DIN rail to
accommodate the switch
Safety
• Lockable handle provides lockout
protection for greater safety and
complies with OSHA lockout
requirements
Wiring
• Premolded conduit entry hole is offset to
prevent water condensation from falling
directly on interior electrical components
Installation
• Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
Dimensions in Inches (mm)
B-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Switched Twist-Lock® and Hubbellock® Enclosures
IP54
4.88"
(124.0)
SUITABILITY
UL Listed, CSA Certified
Type 3R and 12K Enclosure Rating
Switched Enclosure Ready for Twist-Lock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept any
Hubbell 20 or 30A Twist-Lock receptacle.
Description
Ratings
Catalog Number
Switched Twist-Lock enclosure
Amperage, voltage, and horsepower ratings will be
accommodates any NEMA 2 pole, determined by the choice of the NEMA 20 or 30A
3 wire to 4 pole, 5 wire grounding Twist-Lock receptacle selected.
receptacle (sold separately).
SETL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
11.38"
(289.1)
4.5"
(114.3)
Switched Enclosure Complete with Twist-Lock® Receptacle
Completely pre-wired with a Twist-Lock receptacle, these application oriented combinations
are available to satisfy your needs.
Amps
Voltage
NEMA
Config.
Switched Twist-Lock
enclosure with a pre-wired
HBL2720 receptacle.
30
3Ø 240V AC
L15-30R
3
SE2720A
HBL2721
Switched Twist-Lock
enclosure with a pre-wired
HBL2730 receptacle.
30
3Ø 480V AC
L16-30R
10
SE2730A
HBL2731
Description
Switched
Horsepower Enclosure
SETL3
Use
Twist-Lock Plug
Switched Enclosure Ready for Hubbellock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept your
30A, 4 wire Hubbellock receptacle choice.
Description
Ratings
Catalog Number
Switched enclosure for use with
3 pole 4 wire 30A Hubbellock
receptacle (sold separately).
Amperage, voltage, and horsepower ratings will be
determined by the choice of the 4 wire Hubbellock
receptacle selected.
SEHBL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
SE2720A
HBLAC1
Replacement Mounting Feet
HBLAC2
Description
Catalog Number
For 30A switches.
HBLRFT1∆
Note: ∆ Package of 10 feet and 10 screws.
For technical information see page B-72.
HBLRFT1
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-39
Twist-Lock® Devices
Features and Benefits
Mechanical Interlock Switched Safety Enclosures
Hubbell offers the only mechanical interlock for Twist-Lock®. This new, unfused
mechanical interlock for watertight Safety-Shroud® Twist-Lock® integrates a
watertight receptacle with a linked disconnect switch to provide a mechanically
interlocked receptacle. This virtually eliminates the possibility of making or
breaking the circuit while under load or making a casual or “lazy” connection.
The switch cannot be turned ON until the plug is properly inserted and locked,
and the plug cannot be removed until the switch is turned OFF. All these
protective features are included in a compact Type 4X hose-directed water and
corrosion resistant enclosure that allows for top, bottom or back feed options.
The non-metallic enclosure is nonconductive, yet has an internal frame to assure
ground continuity with metallic conduit.
In addition, this interlock works with all Safety-Shroud Twist-Lock Plugs. The new
unfused mechanical interlock for watertight Safety-Shroud Twist-Lock can be
locked out as a method of compliance with OSHA lockout/tagout regulations.
HBLMITL
Housing Design
• Angled 20 or 30 amp Hubbell
Watertight Safety-Shroud Twist-Lock
receptacle provides watertight, low
profile and mechanical interlock
capabilities (ordered separately)
• Enclosure back is designed for top,
bottom or back feed options
Internal Design
• Horsepower rated switch
• Heavy-duty internal frame bonds conduit
and all grounds and has a DIN rail to
accommodate the switch
Safety
• Lockable handle provides lockout
protection for greater safety and
complies with OSHA lockout
requirements
• Heavy-duty interlock linkage prevents
make and break under load
Wiring
• Premolded conduit entry hole is offset
to prevent water condensation from
falling directly on interior electrical
components, while speeding installation
by making it easier to pull conductors
Installation
• Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
Dimensions in Inches (mm)
B-40
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Mechanical Interlock Switched Safety Enclosures
3.19"
(81.0)
IP66
4.88"
(124.0)
SUITABILITY
UL Listed, CSA Certified TYPE 4,
4X and TYPE 12K Enclosure Rating
Mechanical Interlock Ready for Twist-Lock® Receptacle Addition
This unit is a complete enclosure ready to accept any 20 or 30A Watertight Safety-Shroud
Twist-Lock Receptacle.
Description
Ratings
Catalog Number
Mechanical Interlock
accommodates 20A or 30A
Watertight Safety-Shroud
Twist-Lock receptacles.
Amperage and voltage ratings will be determined
by the choice of the Watertight Safety-Shroud
Twist-Lock selected. Supplied with ¾" NPT Hub.
HBLMITL
11.44"
(290.6)
Accepts the following Watertight Safety-Shroud® Twist-Lock® Receptacles:
20 Amp
Use Watertight
Safety-Shroud
Twist-Lock Plug
Rating
Voltage AC
2 Pole, 3 Wire
120
208-240
277
120/240
240 3Ø
480 3Ø
120/208 3ØY
L5-20
L6-20
L7-20
L14-20
L15-20
L16-20
L21-20
1
2.5
3
2.5
5 ([email protected])
10
3
HBL2310SW
HBL2320SW
HBL2330SW
HBL2410SW
HBL2420SW
HBL2430SW
HBL2510SW
HBL2311SW
HBL2321SW
HBL2331SW
HBL2411SW
HBL2421SW
HBL2431SW
HBL2511SW
120
208-240
120/240
240 3Ø
480 3Ø
600 3Ø
120/208 3ØY
277/480
347/600
L5-30
L6-30
L14-30
L15-30
L16-30
L17-30
L21-30
L22-30
L23-30
1
3
3
7.5
15
15
7.5
7.5
7.5
HBL2610SW
HBL2620SW
HBL2710SW
HBL2720SW
HBL2730SW
HBL2740SW
HBL2810SW
HBL2820SW
HBL2830SW
HBL2611SW
HBL2621SW
HBL2711SW
HBL2721SW
HBL2731SW
HBL2741SW
HBL2811SW
HBL2821SW
HBL2831SW
L5-30
L14-30
L15-30
1
3
7.5
HBL2615SWR
HBL2715SWR
HBL2725SWR
HBL2613SR
HBL2713SR
HBL2723SR
3 Pole, 4 Wire
4 Pole, 5 Wire
Max. HP
Rating*
Receptacle
Catalog Number
NEMA
Config.
4.19"
(106.4)
HBLMITL
30 Amp
2 Pole, 3 Wire
3 Pole, 4 Wire
4 Pole, 5 Wire
HBL2620SW
30 Amp Reverse Service
2 Pole, 3 Wire
3 Pole, 4 Wire
3 Pole, 4 Wire
HBL2713SR
120
120/240
240 3Ø
HBLAC1
Auxiliary Contacts
Description
Ratings
Catalog Number
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC1
Auxiliary contact.
HBLAC2
HBLAC2
Replacement Parts
Description
Catalog Number
Ground block.
Neutral block.
Replacement switch.
HBL30RGB
HBL30RNB
HBLDS3RS
HBL30RGB
HBL30RNB
Replacement Mounting Feet
Description
Catalog Number
For 30A switches.
HBLRFT1∆
Note: *HP ratings for the final unit are determined by the HP rating of the switch, limited by the full load current capability
of the receptacle at 80% of rated current, number of phases and line voltage. HP ratings listed above are AC only.
∆ Package of 10 feet and 10 screws.
See pages B-52 and B-53 for accessories.
See page B-73 for technical information.
HBLRFT1
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-41
Twist-Lock® Devices
ADD-A-SHROUD® and Adapters
Safety-Shroud® Twist-Lock® – 20 and 30 Amp
The Add-A-Shroud® devices allow conversion of existing 20A and 30A 3 to 5 wire Hubbell Insulgrip®
Twist-Lock devices to a Safety-Shroud Twist-Lock plug. These devices provide a convenient and
cost-effective way to convert existing Hubbell Insulgrip Twist-Lock plugs to Safety-Shroud Twist-Lock
plugs. The Safety-Shroud Twist-Lock plug permits engagement with the Hubbell Mechanical Interlock
Enclosure which virtually prevents make and break under load.
Add-A-Shroud® Catalog Number HBLSS3
For conversion of all 3 wire Hubbell Insulgrip Twist-Lock Devices.
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 2 Pole 3 Wire Grounding
125V
L5-20
HBL2311
HBLSS3
250V
L6-20
HBL2321
HBLSS3
277V AC
L7-20
HBL2331
HBLSS3
480V AC
L8-20
HBL2341
HBLSS3
600V AC
L9-20
HBL2351
HBLSS3
125V
L5-30
HBL2611
HBLSS3
250V
L6-30
HBL2621
HBLSS3
277V AC
L7-30
HBL2631
HBLSS3
480V AC
L8-30
HBL2641
HBLSS3
600V AC
L9-30
HBL2651
HBLSS3
30A, 2 Pole 3 Wire Grounding
HBLSS3
Add-A-Shroud
Catalog Number
Add-A-Shroud® Catalog Number HBLSS45
For conversion of all 4 and 5 wire Hubbell Insulgrip Twist-Lock Devices.
HBLSS45
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 3 Pole 4 Wire Grounding
125/250V AC
L14-20
HBL2411
HBLSS45
3Ø250V AC
L15-20
HBL2421
HBLSS45
3Ø480V AC
L16-20
HBL2431
HBLSS45
125/250V AC
L14-30
HBL2711
HBLSS45
3Ø250V AC
L15-30
HBL2721
HBLSS45
3Ø480V AC
L16-30
HBL2731
HBLSS45
3Ø600V AC
L17-30
HBL2741
HBLSS45
3ØY 120/208V AC
L21-20
HBL2511
HBLSS45
3ØY 277/480V AC
L22-20
HBL2521
HBLSS45
3ØY 347/600V AC
L23-20
HBL2531
HBLSS45
3ØY 120/208V AC
L21-30
HBL2811
HBLSS45
3ØY 277/480V AC
L22-30
HBL2821
HBLSS45
3ØY 347/600V AC
L23-30
HBL2831
HBLSS45
30A, 3 Pole 4 Wire Grounding
20A, 4 Pole 5 Wire Grounding
30A, 4 Pole 5 Wire Grounding
Add-A-Shroud
Catalog Number
Watertight Safety Shroud - Deluxe Cord Grip and
Metallic Liquidtight Conduit Fitting Adapters
WTSS234
Adapter for Use with ¾" NPT Fittings
WTSS234SS
WTSS310
Description
Cord Dia.
Catalog Number
3 Wire, Anodized Aluminum
.250" - .750"
WTSS234
3 Wire, Stainless Steel
.250" - .750"
WTSS234SS
4 and 5 Wire, Anodized Aluminum
.250" - .750"
WTSS334
4 and 5 Wire, Stainless Steel
.250" - .750"
WTSS334SS
Description
Cord Dia.
Catalog Number
4 and 5 Wire, Anodized Aluminum
.375" - 1.00"
WTSS310
4 and 5 Wire, Stainless Steel
.375" - 1.00"
WTSS310SS
Adapter for Use with 1" NPT Fittings
WTSS310SS
Dimensions in Inches (mm)
B-42
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Non-NEMA 10 Amp, 250 Volts, 15 Amp 125 Volts
3 Pole, 3 Wire, Non-Grounding and
2 Pole, 3 Wire, Grounding
For Replacement Use Only
IP20
2.75"(69.9)
CU
CU
SUITABILITY
Plugs
2P 3W
3P 3W
2.26"
(57.4)
Grounded
Not UL listed
Not Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567C
–
Yellow and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567CY
–
HBL7567C
Note: See page B-49 for accessories.
1.75"
(44.4)
Flanged Inlets
Description
Catalog Number
Stainless steel casing.
HBL7556
1.13"
(28.7)
2.31"
(58.7)
1.94"
(49.3)
HBL7556G
1.50"
(38.1)
.16"(4.1) DIA.
HBL7556
3P 3W
For Replacement Use Only
2P 3W
2.78" (70.6)
IP20
CU
SUITABILITY
CU
1.53"
(38.9)
GR
Connector Bodies
Not Grounded
Not UL listed
Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Insulgrip connector, black and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565C
–
Insulgrip connector, yellow and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565CY
–
Black phenolic.
.296"-.625"
(7.5-15.9)
HBL7555
1.41"
(35.8)
HBL7565C
1.70"
(43.2)
HBL7555G
Note: See page B-49 for accessories.
Receptacles
2.74"
(69.5)
3.28"
(83.3)
Description
Catalog Number
Duplex, black RTP*, back and side wired.
HBL7580
HBL7580G
Single, black phenolic, back and side wired.
HBL7582
HBL7582G
Note: See page B-48 for accessories.
HBL7580
Flanged Receptacles
Description
Catalog Number
Stainless steel casing.
HBL7557
1.75"
(44.4)
1.34"
(34.0)
HBL7557G
Note: See page B-49 for accessories.
*RTP is an abbreviation for reinforced thermoplastic.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
2.31"
(58.7)
1.94"
(49.3)
1.50"
(38.1)
.16"(4.1) DIA.
HBL7557
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
eSpec Sheets Available Online
®
Dimensions in Inches (mm)
Wiring Device-Kellems
B-43
Twist-Lock® Devices
Non-NEMA 20 Amp, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2 Pole, 3 Wire, Grounding and
3 Pole, 3 Wire, Non-Grounding
2.75"(69.9)
For Replacement Use Only
2.26"
(57.4)
1.97"
(50.0)
HBL9965C
1.25" R.
(31.8)
.19" (4.8) DIA.
2.09"
(53.1)
120°
2.04"
(51.8)
2.88"
(73.2)
IP20
SUITABILITY
Y
GR
W
CU
X
20A 250V
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL9965GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
–
20A 125/250V
Non-NEMA
Not UL Listed
HBL9965C
HBL99CM65C
Note: See page B-51 for accessories.
Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
120°
3P 3W
2P 3W
HBL3325C
Note: See page B-50 for accessories.
HBL3325C
For Replacement Use Only
2.75"(69.9)
IP20
3P 4W
4P 4W
W
GR
SUITABILITY
X
Z
Z
X
Y
Y
2.33"
(59.2)
2.21"
(56.1)
HBL7411C
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7411GCB
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
HBL7411C
Note: See page B-53 for accessories.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
Flanged Inlets
Description
120°
2.23"
(56.6)
3.06"
(77.7)
120°
HBL7408C
Dimensions in Inches (mm)
B-44
Catalog Number
–
Nylon casing, back wired.
HBL7408C
Note: See page B-52 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Non-NEMA 20 Amp, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2 Pole, 3 Wire, Grounding and
3 Pole, 3 Wire, Non-Grounding
2P 3W
3P 3W
For Replacement Use Only
W
GR
CU
SUITABILITY
2.26"
(57.4)
X
20A 250V
Non-NEMA
Not UL Listed
Connector Bodies
3.86"(98.0)
Y
IP20
20A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL7314GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
1.97"
(50.0)
HBL7314C
HBL7314C
–
HBL73CM14C
1.39"
(35.2)
1.11" (28.2)
Note: See page B-51 for accessories.
2.20"
(57.2)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back wired.
HBL7310BG
HBL7310B
Note: See page B-50 for accessories.
1.38"
(34.9)
#6-32
TAP
2.38"
(60.5)
3.61"
(91.6)
1.28" (32.5)
HBL7310B
Flanged Receptacles
Description
1.25" R.
(31.8)
Catalog Number
–
Nylon casing, back wired.
.19" (4.8) DIA.
2.09"
(53.1)
HBL3326C
120°
Note: See page B-50 for accessories.
For Replacement Use Only
2.04"
(51.8)
2.88"
(73.2)
3P 4W
IP20
SUITABILITY
Z
120°
4P 4W
GR
W
X
Z
HBL3326C
X
Y
Y
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7413GCB
3.86"(98.0)
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
HBL7413C
2.33"
(59.2)
2.21"
(56.1)
HBL7413GCB
Note: See page B-53 for accessories.
1.71"
(43.4)
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL7410BG
HBL7410B
–
Mounted on a 4" (101.6) round metal cover.
HBL7417B
2.50"
(63.5)
1.57"
(39.8)
Note: See page B-52 for accessories.
#6-32
TAP
Flanged Receptacles
Description
2.38"
(60.5)
3.61"
(91.6)
1.28" (32.5)
HBL7410BG
Catalog Number
Nylon casing, back wired.
1.05" (26.7)
–
HBL7409C
1.34" R.
(34.0)
Note: See page B-52 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
120°
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
eSpec Sheets Available Online
®
HBL7409C
Dimensions in Inches (mm)
Wiring Device-Kellems
B-45
Twist-Lock® Devices
Non-NEMA 20 Amp, 250 Volts, 10 Amp, 600 Volts AC
4 Pole, 5 Wire, Grounding
Z
For Replacement Use Only
2.75"(69.9)
2.33"
(59.2)
2.21"
(56.1)
IP20
SUITABILITY
Plugs
W
GR
Y
X
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3521C
HBL3521C
Note: See page B-53 for accessories.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
Flanged Inlets
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3524C
Note: See page B-52 for accessories.
120°
HBL3524C
IP20
3.86"(98.0)
SUITABILITY
Z
W
Y
X
2.33"
(59.2)
2.21"
(56.1)
HBL3523C
GR
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3523C
Note: See page B-53 for accessories.
1.71"
(43.4)
Single Flush Receptacles
2.50"
(63.5)
1.57"
(39.8)
2.38"
(60.5)
3.28"
(83.3)
Description
Catalog Number
Black thermoset, back wired.
HBL3520
Note: See page B-52 for accessories.
#6-32
TAP
HBL3520
1.34" R.
(34.0)
Flanged Receptacles
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3525C
Note: See page B-52 for accessories.
See page B-69 for technical information.
120°
HBL3525C
Dimensions in Inches (mm)
B-46
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Non-NEMA 30 Amp, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2 Pole, 3 Wire, Grounding and
3 Pole, 3 Wire, Non-Grounding
3P 3W
2P 3W
For Replacement Use Only
IP20
W
GR
Y
2.75"(69.9)
SUITABILITY
Insulgrip® Plugs
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3331GC
2.26"
(57.4)
1.97"
(50.0)
HBL3331C
HBL3331GC
Note: See page B-51 for accessories.
1.25" R.
(31.8)
Insulgrip® Flanged Inlets
Description
.19" (4.8) DIA.
2.09"
(53.1)
Catalog Number
–
Nylon casing, back wired.
HBL3334C
120°
2.09"
(53.1)
2.88"
(73.2)
Note: See page B-50 for accessories.
120°
HBL3334C
For Replacement Use Only
Insulgrip®
IP20
3P 4W
4P 4W
Z
Z
GR
Y
SUITABILITY
Plugs
Y
W
X
X
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
Non-NEMA
30A 3Ø Y
120/208V AC
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3431GCB
HBL3431C
2.75"(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL3431C
Note: See page B-53 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
eSpec Sheets Available Online
®
Dimensions in Inches (mm)
Wiring Device-Kellems
B-47
Twist-Lock® Devices
Non-NEMA 30 Amp, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2 Pole, 3 Wire, Grounding and
3 Pole, 3 Wire, Non-Grounding
For Replacement Use Only
3.86"(98.0)
2.26"
(57.4)
1.97"
(50.0)
HBL3333GC
1.71"
(43.4)
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3333GC
HBL3333C
Note: See page B-51 for accessories.
1.13" (28.7)
2.38"
(60.5)
1.57"
3.61"
(39.8)
(91.6)
2.50"
(63.5)
SUITABILITY
W
Y
GR
IP20
Insulgrip® Connector Bodies
3P 3W
2P 3W
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL3330G
HBL3330
Note: See page B-50 for accessories.
Insulgrip® Flanged Receptacles
#6-32
TAP
1.36" (34.5)
HBL3330G
Description
Catalog Number
–
Nylon casing, back wired.
HBL3335C
Note: See page B-50 for accessories.
1.25" R.
(31.8)
.19" (4.8) DIA.
2.09"
(53.1)
120°
3P 4W
2.04"
(51.8)
2.88"
(73.2)
For Replacement Use Only
IP20
Insulgrip®
HBL3335C
3.86"(98.0)
2.33"
(59.2)
2.21"
(56.1)
Connector Bodies
Z
GR
Y
SUITABILITY
120°
4P 4W
Z
Y
W
X
X
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
30A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3433GCB
HBL3433C
Note: See page B-53 for accessories.
Single Flush Receptacles
HBL3433C
Description
Catalog Number
Black thermoset, back wired.
HBL3430G
HBL3430
Note: See page B-52 for accessories.
1.71"
(43.4)
1.13" (28.7)
Insulgrip® Flanged Receptacles
2.38"
(60.5)
1.57"
3.61"
(39.8)
(91.6)
2.50"
(63.5)
#6-32
TAP
Description
Catalog Number
Nylon casing, back wired.
HBL3435CM2
–
Note: See page B-50 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
1.36" (34.5)
HBL3430
Dimensions in Inches (mm)
B-48
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Non-NEMA 30 Amp, 250 Volts DC Max. and 600 Volts AC Max. 50 - 400Hz
Non-NEMA 20 Amp, 3ØY 120/208 Volts AC 400Hz
Variload® Twist-Lock® Devices
1.86"
(47.2)
In many large plants and laboratories the number of circuits of different ratings and
frequency is greater than the number of blade configurations available in conventional
wiring devices.
2.13"
(54.1)
DIA.
Prior to NEMA configuration standardization the solution was “Variload® Twist-Lock®”
devices with four non-interchangeable center pin and slot configurations that can be
assigned within the same premises to circuits of same voltage, frequency and supply
(AC or DC), in accordance with NEC® 406.4(F) and 406.8 and with CE Code, Part I,
Rule 26-700(3).
Plugs
Flanged Inlets
Connector Bodies
Receptacles
HBL45115
–
HBL45135
HBL45105
HBL45215
–
HBL45235
HBL45205
HBL45315
–
HBL45335
HBL45305
2.89"
(73.4)
.91"
(23.1)
2.13"
(54.1)
DIA.
HBL45335
1.72"
(43.7)
2.69"
(68.3)
20A 3ØY, 120/208V AC Only, 400Hz
Center Pin
Configuration
HBL45315
1.84"
(46.7)
DIA.
30A, 250V DC Max. and 600V AC Max. 50 - 400Hz
Center Pin
Configuration
.91"
(23.1)
Plugs
Flanged Inlets
Connector Bodies
Receptacles
HBL45915†
HBL45985CL†
HBL45935†
HBL45905†
1.72"
(43.7)
#6-32
TAP
1.27"
(32.3)
2.38"
(60.5)
3.28"
(83.3)
1.02"(25.9)
HBL45305
Note: †UL Listed only.
Receptacle Wallplates
Description
Single Receptacle with
Face Dia. 1.74" (44.2)
Catalog Number
Stainless steel 302/304, .035 in. (0.9), horizontal brushed finish.
SS725
SS725
IP55*
SUITABILITY
Weatherproof Boots
Description
Seal-Tite®
Catalog Number
black elastomer for
Variload®
plugs.
Seal-Tite® black elastomer for Variload® connector bodies.
HBL6027**
HBL6028**
Note: *When installed and used properly with plug and connector body combinations.
** Weatherproof boots not UL Listed, nor CSA Certified.
HBL6027
HBL6028
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
eSpec Sheets Available Online
®
Dimensions in Inches (mm)
Wiring Device-Kellems
B-49
Twist-Lock® Devices
Accessories for 15 Amp
2 and 3 Wire Devices
Wallplates, 1-Gang
SS8
SS7
Description
Color
Duplex
Receptacles
Single Receptacles with
Face Dia. 1.40" (35.6)
Nylon, smooth.
Brown
Ivory
NP8
NP8I
NP7
NP7I
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS8
SS7
Stainless steel 430, .035 in. (0.9),
horizontal brushed finish.
SS8L
SS7L
Brass .04 in. (1.0),
horizontal brushed finish.
SB8
SB7
Aluminum .05 in. (1.3),
horizontal brushed finish.
SA8
SA7
Description
Duplex
Receptacles
Single Receptacles with
Face Dia. 1.40" (35.6)
Cast aluminum, for standard horizontal box mount.
HBL5205WO
Same as above except FS/FD box mount.
HBL5206WO
IP44
HBL5206WO
SUITABILITY
Weatherproof Covers
–
Cast aluminum vertical FS/FD box mount.
HBL5221
–
–
HBL7420
Gray thermoplastic, vertical standard box mount,
corrosion resistant.
HBL5222*
–
Same as above except yellow.
HBL52CM22*
Gray thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL5221*
HBL7423WO
Yellow thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21*
HBL74CM23WO
White thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21W*
–
–
Note: *IP20 Suitability only.
HBL7423WO
IP44
SUITABILITY
Weatherproof Covers for
15A Nylon Flanged Receptacles and Inlets
Duplex
Receptacles
Description
–
Gray thermoplastic, corrosion resistant.
WP1
Single Receptacles with
Face Dia. 1.40" (35.6)
WP1
Note: All weatherproof covers listed above are UL Listed for wet and damp locations with cover closed.
Those with suffix WO are UL Listed with cover open.
See page N-23 for additional information on covers.
a
a
a
Colored Cord Clamps*
Description
Color
For 3 Wire Devices
For 4 & 5 Wire Devices
For use with 20A and 30A Insulgrip®
Twist-Lock® Plugs and Connectors.
Cord diameter: 3 wire .350"-.930" (9-24),
4 & 5 wire .350" – 1.150" (9-29)
Blue
Brown
Green
Orange
HBLTL2CCBL
HBLTL2CCBR
HBLTL2CCGR
–
HBLTL3CCBL
HBLTL3CCBR
HBLTL3CCGR
HBLTL3CCOR
Note: *Clamp only. Contains no screws. Order in increments of 10. Not UL Listed or CSA Certified.
Dimensions in Inches (mm)
B-50
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories for 15 Amp
2 and 3 Wire Devices
• Tinted lid is aesthetically pleasing in any location.
High-impact, polycarbonate while-in-use cover
will not rust or corrode; cover is NEMA 3R rated
• Compact 2-gang design
Pool Kit Contains:
• Heavy duty, industrial grade locking
receptacle NEMA L5-20, 20A 125V
• Single-pole switch
(20A, 120-277V AC)
• Two gang, 2 inch deep die-cast aluminum
weatherproof box with (4) ¾ inch
threaded outlets
• Two gang, weatherproof while-in-use cover
• Includes mounting hardware, gasket,
wire connector and (3) closure plugs
• Complete assembly instructions
HBLPKL520
• Locking receptacle prevents
unintentional disconnection
of mating pump plug
HBL6023
Pool Pump Kit
Description
Catalog Number
Pool pump receptacle kit.
HBLPKL520
Weatherproof, Seal-Tite®, Triple Seal Boots
for 15A Insulgrip® Devices
IP55*
SUITABILITY
HBL6024
Description
Catalog Number
Black elastomer boot for plugs when used in a cord set and connector bodies
when used with a flange inlet.
HBL6023
Same as above except yellow elastomer.
HBL60CM23
Black elastomer boot for connector bodies when used in cord sets.
HBL6024
Same as above except yellow elastomer.
HBL60CM24
Note: *When installed and used properly with plug and connector body combinations.
HBL7529A
Closure Cover
Description
Catalog Number
For use with 3 wire 15A Twist-Lock flush or flanged receptacles.
HBL7529A
3.14"
(79.8)
PLUGOUT® Lockout Devices
Description
Catalog Number
Lockout device for 15A and 20A straight blade plugs.
HLDMP
Lockout device for attachable 20 and 30A plugs, straight body or angle types,
with or without weatherproof covers.
HLD
Note: See section Z for additional information on PLUGOUT Lockout devices.
4.22"
(107.2)
HLDMP
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-51
Twist-Lock® Devices
Accessories for 20 and 30 Amp
3, 4 and 5 Wire Devices
Wallplates, 1-Gang
NP720BK
Description
Color
Single Receptacles with
Face Dia. 1.60" (40.6)
Nylon, smooth.
Black
NP720BK
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS720
Brass .04 in. (1.0), horizontal brushed finish.
SB720
SS720
IP44
Weatherproof Covers
HBL7425WOA
SUITABILITY
Description
Single Receptacles with
Face Dia. 1.60" (40.6)
Cast aluminum, for FS/FD box mounting.
HBL7420
Gray thermoplastic, for FS/FD box mounting,
corrosion resistant.
HBL7425WOA
Same as above except yellow.
HBL74CM25WOA
Weatherproof Covers for
Flanged Inlets and Flanged Receptacles
IP44
SUITABILITY
Description
Single Receptacles with
Face Dia. 1.60" (40.6)
Gray thermoplastic, corrosion resistant.
WP2
Note: Weatherproof covers are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
See page N-23 for additional information on covers.
HBL6032
Closure Cover for 3 Wire Flanged Inlets
Description
Catalog Number
Rubber closure plug.
HBL2899
Note: Closure cover not UL Listed, CSA Certified.
IP55*
Insulgrip®
HBL2899
Weatherproof,
SUITABILITY
Seal-Tite®,
Triple Seal Boots
For 3 Wire
Devices
For 4 & 5 Wire
Devices
Black elastomer boot for plugs when used in a cord set
and connector bodies when used in flanged inlets.
HBL6031
HBL6035
Same as above except yellow.
HBL60CM31
HBL60CM35
Black elastomer boot for connector bodies when used in
a cord set.
HBL6032
HBL6036
Same as above except yellow.
HBL60CM32
HBL60CM36
For 3 Wire
Devices
For 4 & 5 Wire
Devices
HBL3WAA
HBL45WAA
For 3 Wire
Devices
For 4 & 5 Wire
Devices
Lockout device for attachable 20 and 30A locking plugs, straight
body or angle types, with or without weatherproof covers.
HLD
HLD
Lockout device for 20 and 30A 3 wire angle plugs and
watertight Safety-Shroud® Twist-Lock® plugs.
HLD2
HLD2
Description
HBL3WAA
Angle Adapter
4.27"
(108.5)
Description
Nylon, angle adapter for Insulgrip plugs and connector bodies,
cord grip range .325"-.930" (8.3-24).
PLUGOUT® Lockout Devices
7.27"
(184.7)
HLD
Dimensions in Inches (mm)
B-52
Description
Note: See section Z for additional information on PLUGOUT Lockout devices.
*When installed and used properly with plug and connector body combinations.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories for 20 and 30 Amp
3, 4 and 5 Wire Devices
Insulgrip® Plug and Connector Body Latching Kit
The Hubbell latching kit provides both improved safety and security through a double locking
feature that makes unintentional disconnection virtually impossible – even under high vibration
situations. The plug and connector body lock once when first connected, then again when
you push the special position locking slide into place.
Insulgrip® Latching Kit
Description
For 3 Wire
Devices
For 4 & 5 Wire
Devices
For all 20A and 30A Twist-Lock Insulgrip plugs and connectors.
SK2
SK3
Weatherproof,
SK2
IP55*
Valise®
SUITABILITY
Seal-Tite®,
Triple Seal Boots
For 3 Wire
Devices
Description
For 4 & 5 Wire
Devices
Yellow Seal-Tite® elastomer triple seal cover for use with Valise plugs
when used in cord set and Valise connector bodies when used with
flanged inlet.
HBL60CM31V
Yellow Seal-Tite® elastomer triple seal cover for use with Valise
connector bodies.
HBL60CM32V
–
HBL60CM31V
–
Note: *When installed and used properly with plug and connector body combinations.
HBL60CM32V
Twist-Lock® Circuit Testers
Description
3-Phase Circuit Tester
Rating
3Ø 120/208V AC
Min. Voltage: 90V AC
20 Amp
Configuration Catalog Number
NEMA L21-20P HBL3PT2511
X
Y
X
Y
W
G
30 Amp
Configuration Catalog Number
NEMA L21-30P HBL3PT2811
Z
Z
20A 3ØY
120/208V
AC
NEMA
L5-20P
HBLT2311
NEMA L21-20P
Circuit Tester
W
UL/CSA
2 HP
125V
30A 3ØY
120/208V AC
NEMA
L5-30P HBLT2611
NEMA L21-30P
UL/CSA
W
3 HP
G
20A 125V
1 HP
30A 125V
NEMA L6-30P
L5-30P
NEMA
HBLT2621
UL/CSA
X2
X
250V
HBL3PT2511
G
Y
Y
20A 250V
NEMA L6-20P
NEMA
L7-20P
UL/CSA
2 HP
HBLT2331
20A 277V AC
NEMA L7-20P
NEMA
L14-20P HBLT2411
UL/CSA
2 XHP
W
G
30A 250V
NEMA L6-30P
UL/CSA
2 HP
NEMA L14-30P HBLT2711
X
W
G
Y
Y
20A 125/250V AC
30A 125/250V AC
NEMA L14-30P
UL/CSA
2 (2) HP
NEMA L24-20P
L14-20P
NEMA
HBLT3721
UL/CSA
347V
HP
G
277V
HBLT26CM11
(Marine)
G
NEMA L5-20P
NEMA
L6-20P HBLT2321
UL/CSA
125/250V
W
G
2 (1) HP
HBLT26CM11
G
W
20A 347V AC
NEMAupon
L24-20P request.
Note: Testers in other NEMA configurations can be developed
UL/CSA
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-53
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® Accessories
E
15° Angle Non-Metallic Back Box
NPT
Hub
Size
F
C
A
Description
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
15°
B
D
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
5.67" 4.44" 4.05" 3.91"
(144.0) (112.8) (102.9) (99.3)
E
Inch
(mm)
F
Inch
(mm)
2.35" 4.92"
(59.7) (125.0)
Cubic Inch
Capacity Catalog Number
30.00"
BB2030N
Note: Hub is not included; order Raco part number 1704. This box meets IP67 requirement and Type 4X requirements when
installed with a watertight conduit hub.
Non-Metallic Angle Box
E
15° Angle Metallic Back Boxes
C
A
F
NPT
Hub
Size
Description
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
15°
B
D
Metallic Angle Box
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
¾"
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB201W
1"
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB301W
E
Metallic Feed Thru Back Boxes
C
A
48 CU. IN.
NPT
Hub
Size
F
Description
B
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
D
Metallic Feed Thru Box
D
E
C
B
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
¾"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT202W
1"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT302W
NPT
Hub
Size
Description
AB203055
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
D
E
A
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
6.80" 5.63" 6.60" 4.50" 3.74"
(172.4) (142.9) (167.0) (114.3) (95.0)
F
Inch
(mm)
-
Cubic Inch
Capacity Catalog Number
45.27"
AB203055
55° Angle Metallic Adapter with Grounding Lug
A
Inch
(mm)
55°
AA203055
C
Inch
(mm)
55° Angle Metallic Adapter and Back Box
55°
C
B
Inch
(mm)
Note: These boxes are cast aluminum and are finished with enamel paint. These boxes withstand a 500-hour salt spray test as
well as UL raintight and external icing tests. NPT (metric designator).
A
B
A
Inch
(mm)
Description
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
4.89" 3.33" 4.29" 3.75" 2.50"
(172.4) (167.0) (142.9) (114.3) (95.0)
F
Inch
(mm)
-
Cubic Inch
Capacity Catalog Number
25.00"
AA203055
Straight Watertight Wall Box Adapter
HBL2030AP
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles and
inlets to 2-gang, device mount, FD boxes.
HBL2030AP
Non-Watertight Angle Wall Box Adapter
AA2030PS
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles to
1- or 2-gang standard wall boxes (4" or 4¹¹⁄₁₆" square).
AA2030PS
Dimensions in Inches (mm)
B-54
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
50 Amp Plugs and Connector Bodies
Hubbell’s 50 amp Twist-Lock® devices feature a heavy-duty design built
for heavy-duty applications. These Hubbell 50 amp Twist-Lock plugs and
connector bodies are built to go where you need power, even in some of
the harshest environments.
On the outside, 50 amp plugs and connectors are made of super tough nylon
for better impact resistance. On the plug, the stainless steel shroud not only
provides protection and durability, but safety as well. That’s because the
rigid construction restricts distortion, thus minimizing the possibility of mating
incorrect devices.
CS6361C
On the inside are the kinds of features that separate Hubbell from all the rest.
The cord grip has been designed with offset gripping jaws to securely hold the
conductors – not just the cord jacket. Hubbell’s box terminals speed wiring
and provide a superior termination. The plug’s thermoplastic polyester interior
provides excellent heat resistance without compromising strength.
In all, it’s the combination of function and performance that Hubbell demands
of all its products. That is why we will never add a feature that compromises
performance.
CS6360C
Housing Design
• Housing assembly latch slotted to
fit standard flat-blade screwdriver
providing secure assembly and fast
disassembly for wiring
• Super tough nylon housing offers
better impact qualities
Internal Design
• Thermoplastic polyester interior provides
heat resistance and impact strength
• 6/6 nylon nose – thermoplastic polyester
terminal cover provides heat resistance
in terminal area and impact strength of
nose piece
Safety
• Padlock capable shroud allows
compliance to OSHA lockout tagout
regulation 29 CFR 1910.147
• Stainless steel shroud restricts
mismating with the wrong device
Terminals
• Box terminal with hex socket threaded
slug is superior because it permits
high clamping pressure on conductors
without damaging strands
Installation
• Three-piece thermoplastic clamp
assembly with stainless steel fast
lead screws provides a more
consistent, durable grip. Sealed
cable entry keeps out moisture
and dust
Contacts
• One-piece grounding contact on
4-wire devices provides a more reliable
grounding system for a safer device
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-55
Twist-Lock® Devices
50 Amp, 125, 250 Volts and 480 Volts AC
Y
6.38"
(162.0)
IP20
CS8265C
X
G
50A 125V
UL/CSA
Plugs
X
G
SUITABILITY
2.59"
(65.8)
Y
W
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6361C
G
50A 250V
UL/CSA
50A 480V AC
UL/CSA
CS8265C
CS8465C
CS8275
CS8475†
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
.19"
(4.8)
DIA.
1.50"R
(38.0)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6377†
2.62"
(66.5)
2.17"
(55.1)
CS8275
IP20
SUITABILITY
6.34"
(161.0)
Connector Bodies
2.59"
(65.8)
CS8264C
X
G
50A 125V
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6360C
Y
X
G
50A 250V
UL/CSA
G
50A 480V AC
UL/CSA
CS8264C
CS8464C
CS8269
CS8469†
Note: See page B-60 for accessories.
2.13"
(54.1)
Receptacles
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
Y
W
Description
Catalog Number
Black phenolic.
CS6370
Note: See page B-60 for accessories.
See page B-71 for technical Information.
†Not CSA Certified.
2.44"
(62)
CS8269
Dimensions in Inches (mm)
B-56
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Amp, 125/250, 3Ø 250 Volts and 3Ø 480 Volts AC
Y
IP20
SUITABILITY
Plugs
X
X
W
G
Z
G
50A
125/250V AC
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6365C
6.38"
(162.0)
Y
Y
X
Z
G
50A
3Ø 480V AC
UL/CSA
50A
3Ø 250V AC
UL/CSA
CS8365C
2.59"
(65.8)
CS6365C
CS8165C
3.50"
(88.9)
90°
Note: See page B-60 for accessories.
Flanged Inlets
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6375
Zinc plated steel casing,
thermoset interior with lift cover.
Gray Valox® housing and flange.
1.50"R
(38.0)
CS8375
CS8175
CS6375M2
–
–
HBL6375S*
–
–
.19"
(4.8)
DIA.
2.62"
(66.5)
2.17"
(55.1)
CS6375
Note: *Type 3R.
2.63"
(66.8)
1.50"R
(38.0)
Y
IP20
W
SUITABILITY
X
Z
G
50A
125/250V AC
UL/CSA
Connector Bodies
Y
Y
X
X
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6364C
Z
G
50A
3Ø 480V AC
UL/CSA
50A
3Ø 250V AC
UL/CSA
CS8364C
2.19"
(55.6)
G
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
CS8164C
CS6375M2
Note: See page B-60 for accessories.
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
CS6369
CS8369
CS8169
2.59"
(65.8)
Note: See page B-60 for accessories.
CS6364C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62.0)
CS6369
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
eSpec Sheets Available Online
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-57
Twist-Lock® Devices
50 Amp, 250 Volts DC and 600 Volts AC
6.38"
(162.0)
IP20
SUITABILITY
2.59"
(65.8)
HBL3763C
Plugs
Y
X
G
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3763C
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
Description
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
2.17"
(55.1)
Zinc plated steel casing,
thermoset interior.
HBL3777
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3767
HBL3777
2.63"
(66.8)
1.50"R
(38.0)
IP20
2.19"
(55.6)
. 19"
(4.8)
DIA.
90°
3.50"
(88.9)
Connector Bodies
SUITABILITY
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3762C
Note: See page B-60 for accessories.
HBL3767
6.34"
(161.0)
.63"
(16.0)
Receptacles
Description
2.59"
(65.8)
Black phenolic.
HBL3771
Note: See page B-60 for accessories.
See page B-71 for technical Information.
HBL3762C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62)
HBL3771
Dimensions in Inches (mm)
B-58
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Amp, 250 Volts DC and 600 Volts AC
Z
X
Z
G
Y
G
50A 600V AC
50A 250V DC
Plugs
6.38"
(162.0)
X
Y
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3765C
50A 600V AC
50A 250V DC
2.59"
(65.8)
HBL7765C
HBL3765C
Note: See page B-60 for accessories.
2.63"
(66.8)
1.50"R
(38.0)
Flanged Inlets
2.19"
(55.6)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
HBL3775
HBL7958
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3768
HBL7968
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
HBL3768
X
Y
Z
X
Z
Connector Bodies
3.50"
(88.9)
90°
Y
G
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3764C
G
50A 600V AC
50A 250V DC
50A 600V AC
50A 250V DC
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
HBL7764C
Note: See page B-60 for accessories.
2.17"
(55.1)
HBL3775
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
HBL3769
HBL7379
Note: See page B-60 for accessories.
2.59"
(65.8)
HBL3764C
2.13"
(54.1)
2.69"
(68.3)
3.28"
(83.3)
1.03"
(26.2)
2.44"
(62.0)
HBL3769
Important Note: Catalog numbers HBL7765C, HBL7958, HBL7968, HBL7764C, HBL7379 are
for replacement use only. See other singly rated 50A Twist-Lock® devices in this section.
HBL3700 series Twist-Lock devices do not interchange with any other devices in this section.
eSpec Sheets Available Online
®
Dimensions in Inches (mm)
Wiring Device-Kellems
B-59
Twist-Lock® Devices
50 Amp Twist-Lock® Accessories
IP44
SUITABILITY
Weatherproof Receptacle Lift Cover Plates for FS/FD Box Mounting
HBL7774WO
Description
Catalog Number
Corrosion resistant, gray thermoplastic.
HBL7774WO
Same as above except yellow.
HBL77CM74WO
Cast aluminum.
HBL7770
Note: See section N for additional information on weatherproof plates.
Receptacle Plates for FS/FD Box Mounting
HBL7770
Description
Catalog Number
Cast aluminum with lift cover.
Same as above less lift cover.
HBL7382•*
HBL7383•
Stainless steel, single gang, wallplate.
SS750
Receptacle ½" Raised Cover
Description
Catalog Number
Galvanized Steel fits 4" square or 2-gang box.
HBL50SC
IP55**
SUITABILITY
Weatherproof Boots
HBL7382
Description
Catalog Number
Seal-Tite®
triple seal black elastomeric cover for plugs when used in a cord set
and connector bodies when used with flanged inlets.
HBL7716C†
Seal-Tite triple seal black elastomeric cover for connector bodies when used
with cord sets.
HBL7717C†
Inlet Closure Plug
HBL50SC
Description
Catalog Number
Black closure plug.
HBL4892†
Replacement Parts
Description
Catalog Number
Cord clamp Kit.
HBLCSCK
Note: •Will only fit non-“CS” type 50A Twist-Lock receptacles.
*Not UL Listed “WDL Closed”.
**When installed and used properly with plug and connector body combinations.

 IP20 SUITABILITY.
†Not UL Listed.
SS750
HBL7716C
B-60
HBL7717C
®
HBL4892
Wiring Device-Kellems
HBLCSCK
www.hubbell-wiring.com
Twist-Lock® Devices
Features and Benefits
Hubbellock® Plugs and Connector Bodies
The Hubbellock devices feature an exclusive design unlike any other in the
industry. The unique design is built to provide the safest heavy-duty device even
in some of the harshest environments. These Hubbellock plugs and connector
bodies are built with a super tough nylon housing for high impact resistance
and a one of kind interior design for superior safety that Hubbell is known for.
The male contacts are molded into the nose for damage resistance and
completely annihilate the chance of deformity. Additionally, the plug as well as
the connector retains power mechanical cord grips that not only secure the
cable but also clamp down on the conductors in order to provide unrivaled
strain relief.
HBL21415B
Inside the connector is Hubbell's unique safety design. With unparalleled
box terminations the connector interior holds a spring-loaded safety shutter
to provide the ultimate arc protection. Furthermore the exceptional heat and
impact resistance is maintained by the thermoplastic interior contributing to
a longer lasting device.
In all, the one of a kind function of the Hubbellock devices provide a safe
and dependable performance in the most demanding applications.
HBL21414B
Note: The cut-away views below and call-outs are construction elements pertaining specifically to the 30A Hubbellock series.
While the Hubbellock contact interface design applies to all, there are construction elements that are different, depending on the amperage.
Housing Design
• Insulated non-metallic housing
enhances safety and abuse
resistance
• Impact resistance in the interior of
the female device comes from a
strong thermoplastic material
Internal Design
• No “lazy” connections because a springloaded safety shutter automatically
ejects the plug if it hasn’t been properly
locked into the female device. This
eliminates teasing of the contacts, a
major cause of contact burn-up
• Arcs are snuffed out, when devices are
mated or unmated under load, by springloaded safety shutter
Safety
• Enhanced safety because access to
live female contacts is restricted by
the spring-loaded safety shutter
Terminals
• Superior wire terminations are assured
with box terminals and screws with
pressure pads. This design captures
stray wire strands and permits more
clamping pressure on the wire without
damaging it. Loosening of terminations
and resulting heat build-up are greatly
reduced
installation
• Three-piece thermoplastic clamp
assembly with fast-lead stainless
screws provides a more consistent
durable grip. Grommets provide
a sealed cable entry that protects
against the entry of moisture
and dust
Contacts
• Positive locking is ensured by the nose
of the plug being keyed into a detent in
female device. This lock is independent of
the contacts or a separate mechanical lock
• Longer contact life is assured by
supplementary springs. Other devices rely
just on contacts themselves to provide
proper contact pressure
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-61
Twist-Lock® Devices
20 Amp, 125 Volts
3.22"
(81.8)
IP30
GR
SUITABILITY
1.72"
(43.7)
2.31"
(58.7)
W
Plug
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23035B
HBL23035B
GR
3.56"
(90.4)
W
Connector Body
1.72"
(43.7)
1.63"
(41.4)
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23032B
HBL23032B
GR
#6-32
TAP
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
2.50"
(63.5)
1.66"
(42.2)
W
Receptacle
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23030
Note: Devices listed above are not interchangeable with any other Hubbellock device listed in this catalog.
HBL23030
Accessories
Weatherproof Covers
HBL7423WO
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL23007
Dimensions in Inches (mm)
B-62
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Amp, 125 Volts AC or DC, 10 Amp, 250 Volts DC, 480 Volts AC
IP30
GR
SUITABILITY
2.31"
(58.7)
Y
X
Plug
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23005GB
1.72"
(43.7)
3.22"
(81.8)
HBL23005GB
Y
3.56"
(90.4)
GR
X
Connector Body
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23002GB
1.72"
(43.7)
1.63"
(41.4)
HBL23002GB
Y
1.66"
(42.2)
GR
X
Receptacle
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23000G
2.50"
(63.5)
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
#6-32
TAP
HBL23000G
Accessories
Weatherproof Covers
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL7423WO
HBL23007
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-63
Twist-Lock® Devices
30 Amp, 600 and 480 Volts AC, 20 Amp, 250 Volts DC
IP30
4.75"
(120.7)
.88"
(22.4)
HBL21415B
4.75"
(120.7)
2.33"
(59.2)
4.75"
(120.7)
2.50"
(63.5)
2.33"
(59.2)
HBL25415B
4.56"
(115.8)
Z
GR
Y
4P 5W
Z
Y
GR
GR
W
Y
X
Plugs
30A 600V AC
20A 250V DC
X
30A 480V AC
X
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21415B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM415B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20445B†
–
Black nylon housing,
thermoset interior,
steel shroud.
.700"-1.200"
(17.78-30.5)
–
–
HBL25415B
Note: See page B-68 for accessories.
†Not CSA Certified.
HBL20445B
.88"
(22.4)
3P 4W
Z
SUITABILITY
2.33"
(59.2)
.88"
(22.4)
3P 4W
Flanged Inlets
Description
Catalog Number
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
HBL22CM428
–
–
Black phenolic interior, aluminum housing,
for FS/FD box mounting (not shown).
HBL20418
–
–
Aluminum angle housing, with ¾" NPT hub
for surface mounting.
HBL21447
–
–
3.25"
(82.6)
5.31"
(134.9)
2.69"
(68.3)
HBL21447
SEHBL3 - Switched enclosure for use with 3 pole 4 wire
30A Hubbellock receptacle. Receptacle not included.
See page B-37 for additional information.
Dimensions in Inches (mm)
B-64
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Amp, 600 and 480 Volts AC, 20 Amp, 250 Volts DC
IP30
3P 4W
3P 4W
4P 5W
Z
Z
Z
GR
Y
W
GR
Y
Y
.88"
(22.4)
5.08"
(129.0)
GR
SUITABILITY
X
X
Connector Bodies
2.44"
(62.0)
X
30A 480V AC
30A 600V AC
20A 250V DC
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21414B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM414B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20444B
–
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
–
–
HBL25414B
HBL21414B
.88"
(22.4)
5.08"
(129.0)
2.44"
(62.0)
Note: See page B-68 for accessories.
HBL20444B
Receptacles
Description
Catalog Number
Black phenolic.
HBL20403
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
IP44 SUITABILITY.
HBL22CM427
Aluminum angle housing, with ¾" NPT hub
for surface mounting. IP44 SUITABILITY.
HBL21420
.88"
(22.4)
–
–
5.91"
(150.1)
2.5"
(63.5)
2.69"
(68.3)
HBL25414B
Black phenolic, red center insert.
–
Black phenolic interior, aluminum housing,
blue finish, for FS/FD box mounting.
–
HBL20443
–
HBL25403
–
Black phenolic interior, aluminum weatherproof
housing, blue finish for FS/FD box mounting.
IP44 SUITABILITY.
–
–
HBL25250
1.75"
(44.5)
1.22"
(31.0)
3.28" 2.69"
(83.3) (68.3)
Note: See page B-68 for accessories.
1.94"
(49.3)
Receptacle Accessories
1.94"
(49.3)
HBL20403
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet locations only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet locations only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
4.56"
(115.8)
3.25"
(82.6)
5.31"
(134.9)
Note: *Features two #6-32 threaded inserts to back mount device to cover.
4- #6-32
SCREWS
3.00"
(76.2)
4- #6-32
SCREWS
2.69"
(68.3)
2.84"
(72.1)
1.88"
(47.8 )
HBL21420
1.94"
(49.3)
4.56" 3.25"
(115.8) (82.6)
4.56" 3.25"
(115.8) (82.6)
1.88"
(47.8 )
2.84"
(72.1)
HBL25250
1.66"
(42.2)
1.22"
(31.0)
3.28" 2.69"
(83.3) (68.3)
2.48"
(49.3)
HBL25403
1.94"
(49.3)
HBL20443
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-65
Twist-Lock® Devices
60 Amp, 600 Volts AC
3P 4W
4.81"
(122.2)
IP30
1.09"
(27.7)
HBL26419
X
W
GR
Y
Y
GR
SUITABILITY
Z
Plugs
3.03"
(77.0)
4.81"
(122.2)
4P 5W
X
60A 600V
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel housing.
.920"-1.450"
(23.36-36.83)
HBL26419
Black phenolic interior with blue
thermoplastic sleeve and steel housing.
1.00"-1.50"
(25.40-38.10)
–
Z
60A 600V AC
–
HBL26519
1.09"
(27.7)
3.03"
(77.0)
IP30
SUITABILITY
Flanged Inlets
HBL26519
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
3.50"
(88.9)
2.69"
(68.3)
Description
Catalog Number
Black phenolic interior with steel
housing and flange.
HBL26422
Black phenolic interior with steel
housing and flange with blue finish.
–
–
HBL26522
HBL26422
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
2.69"
(68.3)
3.50"
(88.9)
HBL26522
Dimensions in Inches (mm)
B-66
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
60 Amp, 600 Volts AC
3P 4W
IP30
GR
GR
Y
SUITABILITY
X
W
Y
3.19"
(81.0)
Z
Z
Connector Bodies
4.88"
(124.0)
1.09"
(27.7)
4P 5W
X
60A 600V
60A 600V AC
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel cover.
.920"-1.450"
(23.36-36.83)
HBL26418
Black phenolic interior with blue
thermoplastic sleeve over steel cover.
1.00"-1.50"
(25.40-38.10)
–
–
HBL26516
HBL26418
5.44"
(138.2)
1.09"
(27.7)
3.19"
(81.0)
IP44
Receptacles
SUITABILITY
HBL26516
Description
Catalog Number
Black phenolic interior with short aluminum
housing and lift cover.
HBL26410
–
Black phenolic interior with long aluminum
housing and lift cover.
HBL26420
–
–
Black phenolic interior with long aluminum
housing with lift cover and blue finish.
1.75"
(44.5)
HBL26520
.25 DIA.
HBL26410
SUITABILITY
Description
Catalog Number
Black phenolic interior with steel housing
and flange.
HBL26421
HBL26521
3.63"
(92.2)
4.88"
(124.0)
–
–
Black phenolic interior with steel housing
and flange with blue finish.
3.63"
(92.2)
3.50"
(88.9)
sq. 2.88"
(73.2)
IP30
Flanged Receptacles
1.84"
(46.7)
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26420
Receptacle Box and Adapter Plates
(Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
See page B-68 for additional information.
3.31"
(84.1)
4.88"
(123.9)
3.63"
(92.2)
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26520
4.52"
(114.8)
4.53"
(102.13)
2.69"
(68.3)
3.50"
(88.9)
2.86"
(72.6)
4.13"
(104.9)
2.86" 4.12"
(72.6) (104.6)
2.69"
(68.3)
3.31"
(84.1)
HBL26421
HBL26521
Dimensions in Inches (mm)
eSpec Sheets Available Online
®
Wiring Device-Kellems
B-67
Twist-Lock® Devices
Hubbellock® Accessories
30 Amp Hubbellock® Accessories
Receptacle Plates for FS/FD Box Mounting
HBL20405
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet location only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet location only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
Note: *Features two #6-32 threaded inserts to back mount device to cover.
IP54
Switched Enclosure
SUITABILITY
Description
Catalog Number
Switched enclosure for use with 30A 3 pole 4 wire Hubbellock receptacle.
Receptacle not included.
SEHBL3
Note: For more information on switched enclosures see page B-37.
Liquidtight Metallic Conduit Adapters
Description
Catalog Number
Adapter for use with ½" NPT conduit fittings.
SAB12
Adapter for use with ¾" NPT conduit fittings.
SAB34
Boots
SEHBL3
Description
Catalog Number
“Mini” boot for 4 wire Hubbellock connector body.
HBL20424B†
“Mini” boot for 4 wire Hubbellock plug.
HBL20425B†
Note: †Not UL Listed or CSA Certified.
60 Amp Hubbellock® Accessories
SAB34
Receptacle Box and Adapter Plates (Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
HBL20424B
Kellems® Cable Grip
Description
Cord Diameter
Catalog Number
Cable grip.
.830"-1.000" (21.1-25.4)
H660A
Cable grip (not shown).
1.000"-1.140" (25.4-28.9)
H661A
Cable grip (not shown).
1.125"-1.328 (28.6-33.7)
H662A
4.50"
(114.3)
HBL20425B
4.50"
(114.3)
3.88"
(98.6)
3.88"
(98.6)
3.53"
(89.7)
4.50"
(114.3)
3.88"
(98.6)
4.50"
(114.3)
1.50" NPT
HBL26401
H660A
2.18"
(55.4)
4.50"
(114.3)
4.50"
(114.3)
2.88"
(73.2)
3.88"
(98.6)
HBL26402
3.88"
(98.6)
3.88"
(98.6)
.22" (5.6)
.41" (10.4)
HBL26404
Dimensions in Inches (mm)
B-68
®
Wiring Device-Kellems
www.hubbell-wiring.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement