Honda 2009 Civic Hybrid Navigation Manual
Honda 2009 Civic Hybrid comes with a navigation system that has a comprehensive set of features to help you find your way around. You can enter destinations by address, intersection, or even by selecting a place from a list of categories. The system will then calculate the best route and provide you with turn-by-turn directions. You can also use the navigation system to find nearby businesses, restaurants, and other points of interest. And if you ever get lost, you can always use the "Find Nearest" voice command to get directions to the nearest gas station, restaurant, or other type of business.
Advertisement
Advertisement
2009 Civic
Navigation Manual
(Unlinked)
This document does not contain hyperlinks and may be formatted for printing instead of web use. This is due to changes in content and specifications of the vehicle that happen throughout the model year. This manual will be replaced with a hyperlinked version at the end of the model year.
© 2008 Honda Motor Co., Ltd. P/N 00X31-SNA-8200
Introduction ..................................4
Manual Overview ............................4
System Overview ............................4
Accessories Precautions ..................5
Important Safety Information ..........5
Map Overview .................................6
Current Street .................................... 6
Verified/Unverified Street.................. 6
User Agreement ............................8
Getting Started ...........................10
System Controls ............................10
Voice Control Basics.....................12
Using the Voice Control System ...... 13
Improving Voice Recognition .......... 13
Selecting an Item (Button) on the
Screen .........................................14
Selecting an Item in a List .............14
Using the On-screen Keyboard .....15
System Start-up .............................16
Bluetooth® HandsFreeLink® .......18
Map Screen Legend.......................19
Map Screen Description ................20
Zoom In/Out..................................... 20
Map Scrolling .................................. 20
Displaying Current Location .........20
System Function Diagram .............21
Entering a Destination .............. 22
By Address ....................................23
Selecting the State or Province........ 23
Selecting the City ............................. 23
Selecting the Street .......................... 25
Entering the Street Number ............. 27
By Intersection...............................27
Selecting the State or Province........ 28
Selecting the City ............................. 28
Selecting the Street .......................... 30
By Places .......................................32
Finding the Place by Category ........ 32
Finding the Place by Name.............. 36
Finding the Place by Phone
Number ......................................... 36
By Map Input.................................36
Showing the Map of Current
Position......................................... 37
Showing the Map of City.................. 38
Showing the Map of State ................ 38
Showing the Map of Continental
USA............................................... 39
By Previous Destinations...............40
By Today’s Destinations ...............41
Editing Today’s Destinations List ... 41
Adding Destinations to the List........ 42
Table of Contents
By Address Book...........................43
Adding Addresses to the Personal
Address Book ................................ 43
By Go Home ..................................44
Driving to Your Destination ..... 45
Driving to Your Destination ..........45
Calculate Route to Screen..............45
Changing the Routing Method......... 46
Viewing the Routes........................... 47
Viewing the Destination Map .......... 48
Map Screen ....................................48
Route Line ........................................ 48
Guidance Prompts ........................... 49
Map Screen Legend ......................... 50
Guidance Screen ............................51
Guidance Screen Legend ................. 51
Distance and Time to
Destination..................................52
Direction List .................................52
Exit Info.
(Freeway Exit Information).......... 53
Split-Screen Guidance ...................53
Map Scale ......................................54
Map Orientation.............................55
Destination Icon.............................56
Navigation System
1
Table of Contents
Landmark Icons .............................56
Showing Icons on the Map............... 58
Icon Options .................................... 58
Going Off the Route ......................60
Off-road Tracking..........................60
Viewing/Saving the Current
Location......................................61
Pop-Ups and Disclaimers ..............62
Changing the Route .......................63
Change Route By Screen ................. 63
Waypoints ........................................ 63
Reroute: Avoid Streets ..................... 65
Reroute: Detour ............................... 65
Reroute: Change Routing Method ... 65
Cancel Current Route ...................... 66
Back to Current Route ..................... 66
Changing Your Destination...........66
Find Nearest (Voice command) ....... 66
Go Home (Voice command) ............ 66
Using Joystick to Change
Destination ................................... 66
Entering a Destination from the Menu
Screen (while en route) ................ 68
Continue Trip Screen.....................68
Information Features ................ 69
Information Screen ........................69
Cellular Phonebook .......................69
Voice Command Help ...................69
Map Legend...................................70
Calendar.........................................71
Entering Your Schedule ................... 71
Calculator.......................................72
Unit Conversion............................... 73
System Setup .............................. 74
Setup Mode....................................74
Setup Screen (first) ........................74
Brightness ........................................ 74
Volume ............................................. 74
Display ............................................. 75
Guidance Prompts ........................... 76
Contrast ........................................... 76
Setup Screen (second) ...................77
Personal Information .....................77
Address Book ................................... 77
Home Address .................................. 81
PIN Number ..................................... 81
User Name ....................................... 82
Previous Destinations ...................... 82
Routing & Guidance......................83
Rerouting ......................................... 83
Unverified Area Routing.................. 84
Edit Avoid Area................................ 88
Edit Waypoint Search Area.............. 90
Guidance Mode................................ 91
Vehicle...........................................91
Off-road Tracking ............................ 91
Correct Vehicle Position.................. 92
System Information .......................93
Basic Settings.................................93
Keyboard Layout.............................. 93
Units (mile or km) ............................ 93
Voice Recognition Feedback ........... 93
Clock Settings................................94
Clock Adjustment ............................. 94
Clock Type ....................................... 95
Color ..............................................96
Map Color........................................ 96
Menu Color ...................................... 96
System Initialization .................. 97
System Initialization ......................97
Entering the Security Code............97
GPS Initialization...........................98
Map Matching................................98
System Limitations .................... 99
Database Limitations............... 101
2
Navigation System
Customer Assistance ................103
Reporting Errors ..........................103
Honda Automobile Customer
Service ......................................103
Visiting Your Dealer ...................104
Obtaining a Navigation Update
DVD .........................................104
Changing the DVD ......................105
PC Card Operation ......................106
Inserting the PC Card.................... 106
Voice Control of PC Card
Functions.................................... 106
CD/CD-R Operation....................106
Voice Control of CD Functions ..... 107
Coverage Areas.........................108
Map Coverage .............................108
U.S. Detailed Coverage Areas....... 108
Canada Detailed Coverage
Areas .......................................... 113
Operation in Alaska and
Hawaii ......................................121
Alaska ............................................ 121
Hawaii ........................................... 121
Shipping a Vehicle To or From
Hawaii ........................................ 122
Frequently Asked Questions... 123
Troubleshooting ....................... 133
Glossary .................................... 135
Glossary .......................................135
Voice Command Index............ 138
Global Commands .......................138
Navigation General
Commands................................138
Navigation Display
Commands................................139
Find Place Commands .................140
Radio Voice Commands..............141
CD Voice Commands..................142
PC Card Voice Commands..........142
AUX Voice Commands...............142
Information Screen Voice
Commands................................143
Setup Screen (first)
Commands................................143
On-Screen Commands.................144
On-Screen Commands Assist ......... 144
Index ......................................... 146
Table of Contents
Navigation System
3
Introduction
Manual Overview
The manual is divided into the following sections:
• Getting Started - A basic introduction that discusses the controls and how to communicate with the system.
• Entering a Destination - How to enter an address or locate a point of interest
(POI).
• Driving to Your Destination - An explanation of the map features, guidance, and cautions.
• Information Features - Cellular
Phonebook, Voice Command Help,
Map Legend, Calendar, and
Calculator.
• System Setup - How to set up and tailor the system for your personal use and use the Address Book.
The back of this manual contains:
• Map Coverage (page 108)
• Frequently Asked Questions (FAQs)
(page 123)
• Troubleshooting Guide (page 133)
• Glossary of Terms (page 135)
• Voice Command List (page 138)
• Operation Specific to Alaska and
Hawaii (page 121)
System Overview
Your navigation system is a highly sophisticated location system with voice control that uses satellites and a map database to show you where you are and to help guide you to a desired destination.
The navigation system receives signals from the global positioning system
(GPS), a network of 24 satellites in orbit around the earth. By receiving signals from several of these satellites, the navigation system can determine the latitude, longitude, and elevation of your vehicle. In addition, a gyroscopic yaw sensor and a vehicle speed sensor in your vehicle keep track of the direction and speed of travel at all times.
4
Navigation System
The navigation system applies location, direction, and speed information to the maps and calculates a route to the destination you enter. As you drive to that destination, the system provides map and voice guidance.
The navigation system is easy to use.
The locations of many places of business and entertainment are already entered in the system. You can select any of them as a destination by using the touch screen, joystick, or voice control.
There are several ways to enter a destination, such as by point of interest
(POI), by address, by phone number, and by selecting it from the map. The last 50 destinations are saved for reuse at a later date. The system also allows you to store a home address to simplify returning home from your destination.
Accessories Precautions
If you have front or side window tinting installed, be aware that if the tint has metallic properties, it can seriously degrade or prevent GPS reception. This is because the GPS antenna is located under the dashboard.
If you plan to install electronic components, such as radar detectors, vehicle tracking devices, remote starters, additional amplifiers, or other audio components, ensure that they are not located near the navigation control unit under the dashboard, near the navigation screen in the dash, or near the GPS antenna under the dashboard.
Signal noise emanating from these devices can cause intermittent disruption of the navigation system.
Introduction
Important Safety Information
The navigation system can distract your attention from the road if you focus on the screen or operate the system’s controls while driving.
Enter as much information as possible into the system before you begin driving, or when the vehicle is stopped.
Then, as you drive, listen to the audio instructions and use voice commands when possible.
Navigation System
5
Introduction
WARNING
Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Follow all operating instructions and safety information in this manual.
While driving, do not look at the screen or operate the system controls for more than a second or so at a time, and only after deciding you can do so safely. Pull to the side of the road if you need more time to look at the screen or operate the controls.
The navigation system is designed to provide route information to help you reach your destination. However, this route guidance may sometimes conflict with current road conditions such as street closures, road construction, detours, and out-of-date map data.
Additionally, the system itself has certain limitations (see page 99).
Therefore, you must verify the audio and visual route information provided by the system by carefully observing the roadway, signs and signals, etc. If you are unsure, proceed with caution.
Always use your own good judgment, and obey traffic laws while driving.
Map Overview
Current Street
The current street on which your vehicle is appears at the bottom of the map screen (see page 19). A message saying
“
Not on a digitized road” may appear instead when you drive half a mile away from a mapped road. For more details, see Off-road Tracking on page 60.
Verified/Unverified Street
Your navigation system has two kinds of streets: verified (dark colored) and unverified (light colored). The differences between the two types of streets are contrasted in the chart on page 7.
“Unverified” Road
“Verified” Road
6
Navigation System
Introduction
When displayed
Street color
Map quality
Routing differences
Cautions
Guidance voice
Time and distance
“to go”
Verified streets (dark colored)
These roads are found within metropolitan areas, and include interstate freeways and major roads connecting cities.
Unverified streets (light colored)
These roads are found in rural areas, and typically include residential streets away from the center of a town.
Shown on daytime map screen as black or red, such as interstate freeways.
Shown on the daytime map screen as light brown.
The database vendor has verified these streets.
Information like turn restrictions, average speed, and whether it is a one-way street have been gathered and used when creating your route to a destination.
While driving to your destination, the displayed route line is solid blue. The system provides voice and map guidance to your destination.
There are no pop-up boxes urging extra caution during a route. However, because roads constantly change, you are urged to use common sense, and always obey posted traffic restrictions.
Voice guidance issues instructions such as “In a halfmile, make a right turn.”
The time and distance “to go,” displayed while en route to a destination, is based on the average speed and distance for the roads used for your route.
These streets have not been verified by the database vendor. The system does not contain information on one-way streets, turn restrictions, or the road’s average speed. They are shown on the map for reference and may have errors in map location, naming, and address range.
Your route line is either a blue dotted “vector line,” or a dashed pink/blue line. For information on selecting this option, and the routing differences, see Unverified Area Routing on page 84.
Regardless of whether the user chooses route guidance, there are cautionary screens before and during the route urging the user to be extra cautious, and obey all traffic restrictions. See Unverified
Area Routing on page 84.
The phrase “if possible” is added to each guidance instruction.
For example: “In a half-mile, make a right turn, if possible.”
Because the average speed of these roads is not known, the time and distance “to go” is based on a fixed average speed of 25 mph for these roads.
Navigation System
7
User Agreement
In using this DVD “Satellite Linked
Navigation System” (the “DVD”), which includes HONDA MOTOR CO.,
LTD. software, ALPINE
ELECTRONICS, INC. software,
NAVTEQ database contents, INFO
USA CORPORATION database, and
ZENRIN CO. database contents
(hereinafter referred to as “Licensors”), you are bound by the terms and conditions set forth below.
By using your copy of the DVD, you have expressed your Agreement to the terms and conditions of this Agreement.
You should, therefore, make sure that you read and understand the following provisions. If for any reason you do not wish to be bound by the terms of this
Agreement, please return the DVD to your dealer.
• The DVD may not be copied, duplicated, or otherwise modified, in whole or in part, without the express written permission of the Licensors.
• The DVD may not be transferred or sublicensed to any third party for profit, rent or loan, or licensed for reuse in any manner.
• The DVD may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.
• The DVD may not be used in a network or by any other manner of simultaneous use in multiple systems.
• The DVD is intended solely for personal use (or internal use where the end-user is a business) by the consumer. The DVD is not to be used for commercial purposes.
• The Licensors do not guarantee to the customer that the functions included in the DVD meet the specific objectives of the user.
• Licensor shall not be responsible for any damages caused by the use of the
DVD to the actual user or to any third party.
• The warranty on the DVD shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in the contents of the DVD.
• The right to use the DVD shall expire either when the user destroys the
DVD or software, or when any of the terms of this Agreement are violated and the Licensors exercise the option to revoke the license to use the DVD or software.
8
Navigation System
• The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser.
• The logos of oil companies, hotels, and convenience stores are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or their products. The logos are trademarks of their respective owners.
The user shall indemnify and save harmless the Licensors, and their officers, employees and agents, from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expense, damages or injuries (including injuries resulting in death) arising out of the use or possession of the DVD or software.
User Agreement
Use, duplication, or disclosure of this
DVD by or on behalf of the United
States government is subject to
“Restricted Rights” as set forth at FAR
52.227-14, -19 or DFARS 252.227-
7013, as applicable. Manufacturers are the Licensors, including HONDA
MOTOR CO., LTD., 2-1-1 Minami
Aoyama Minato-Ku Tokyo 107-8556
JAPAN., Alpine Electronics, Inc., 20-1
Yoshima Kogyodanchi, Iwaki,
Fukushima 970-1192 JAPAN.,
NAVTEQ Corporation, 222
Merchandise Mart, Suite 900, Chicago,
IL, 60654, INFO USA
CORPORATION, 5711 South 86th
Circle, Omaha, NE 68127., and
ZENRIN CO., LTD., 1-1-1 Muromachi,
Kokurakita-ku, Kitakyushu, Fukuoka
803-8630, JAPAN.
Navigation System
9
Getting Started
System Controls
AUDIO button
OPEN button
Screen
Joystick/ENT button
OPEN
button
Tilts the screen down to access the CD,
DVD, and PC Card slots.
CLOSE
button
Return the screen to the original position.
Pressing the
OPEN
button tilts the screen down.
PC Card Slot
CD Slot
INFO button
MAP/GUIDE button
MENU button
SETUP button
CANCEL button
ZOOM (IN)/
(
OUT) buttons
NOTE:
On some vehicle models, the Premium Audio System is not available and the logo will not be displayed on the navigation control panel.
10
Navigation System
CLOSE button
Navi DVD Slot
(Located behind drop-down cover)
NOTE:
• Voice commands are disabled when the screen is tilted down.
• Press the
CLOSE
button to return the screen to the upright position.
Joystick/ENT
button
Moves left, right, up, and down to move the highlighting around the display, to scroll through lists, or to look around a displayed map. After making a selection in a menu or list, push in on the joystick to enter the selection into the system.
In almost all cases, you can enter a selection into the system by using the voice control system, highlighting the item and pushing in on the joystick, or by touching the appropriate item you wish to select.
INFO
button
Displays the screen for selecting
Cellular Phonebook , Voice
Command Help
,
Map Legend
,
Calendar
, and
Calculator
. See page 69.
MAP/GUIDE
button
Displays the map. When en route, switches between the map
, guidance
, and
Direction list
screens. See page 19 or 50.
MENU
button
Displays the Enter destination by screen. When en route, displays the
Change route by
screen.
SETUP button
Displays the Setup screens to change and update information in the system.
See page 74.
CANCEL
button
Cancels the current screen and returns to the previous screen display.
NOTE:
The
NAVI BACK
button on the steering wheel performs the same basic function.
ZOOM (IN)/ (OUT)
buttons
Press ZOOM to zoom in (to show more detail), or ZOOM to zoom out
(to show more area and less detail) while a map
screen is displayed.
ZOOM IN reduces the scale (showing less area with greater detail). ZOOM
OUT increases the scale (showing more area with less detail).
AUDIO
button
Press to display the audio
screen.
For information on audio system features, see the Audio section of the vehicle Owner’s manual.
Getting Started
Other buttons
See the Audio section of the vehicle
Owner's manual.
Screen
All selections and instructions are displayed on the screen. In addition, the display is a “touch screen” – you can enter information into the system by touching the images (icons) on the screen with your finger.
For example, if you need to enter a street name, a keyboard will be displayed. You can type in the street name by saying or selecting the individual characters on the screen.
Clean the screen with a soft damp cloth.
You may use a mild cleaner intended for use on liquid crystal displays (LCDs).
Harsher chemicals may damage the screen.
Navigation System
11
Getting Started
Voice Control Basics
Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. You can also control the audio system. The voice control system uses the
NAVI
TALK
and
NAVI BACK
buttons on the steering wheel and a microphone near the map lights on the ceiling.
HFL TALK button
NAVI TALK button
NAVI BACK button
HFL BACK button
Microphone
(on the ceiling)
NAVI TALK button
This button activates the voice control system. Press and release it when you want to give a voice command. See
Voice Command Index on page 138 for a list of voice commands.
NAVI BACK button
This button has the same function as the
CANCEL
button. When you press and release it, the display returns to the previous screen. When the previous screen appears, the system replays the last prompt. This button is enabled for the navigation system commands only.
However, it can be used to cancel an audio voice command up to one second after the command confirmation.
NOTE:
The
NAVI TALK
and
NAVI BACK
buttons are deactivated while using the
Bluetooth® HandsFreeLink® feature.
See your vehicle Owner’s manual and the official website
(handsfreelink.honda.com) for
information on this system.
(Sedan Controls shown)
NOTE:
While using the voice control system, all of the speakers are muted.
12
Navigation System
Using the Voice Control System
You should use the voice control system as much as possible, and consider manual entry using the joystick as a backup method of entry.
Most of the system’s functions can be controlled by voice commands activated with the
NAVI TALK
button. To control your navigation system by voice:
• Press and release the
NAVI TALK
button.
• Wait for the beep.
• Give a voice command.
Once the microphone picks up your command, the system changes the display in response to the command and prompts you for the next command.
Using the
NAVI TALK
button, answer the prompts as required.
If the system does not understand a command or you wait too long to give a command, it responds with “Pardon,”
“Please repeat,” or “Would you say again.” If the system cannot perform a command or the command is not appropriate for the screen you are on, it sounds a beep.
Anytime you are not sure of what voice commands are available on a screen, you can always say “Help” at any screen. The system can then read the list of commands to you.
When you speak a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off.
However, hearing the feedback will familiarize you with the way the system expects commands to be phrased. See the
Voice Recognition Feedback
setting in Setup.
Getting Started
If you hear a prompt such as “Please use the touch screen to...” or “Please choose an area with the joystick,” the system is asking for input that cannot be performed using the voice control system.
Improving Voice Recognition
To achieve optimum voice recognition when using either the navigation or
Bluetooth® HandsFreeLink® voice control system, the following guidelines should be followed:
NOTE:
Make sure the correct screen is displayed for the voice command that
you are using. See Voice Command
Index on page 138.
• Lower the A/C fan speed during voice recognition operation, and adjust the airflow from both the dashboard and side vents so they do not blow against the microphone on the ceiling.
• Close the windows and the sunroof.
Navigation System
13
Getting Started
• If more than one person is speaking at the same time, the system may misinterpret your command.
• After pressing and releasing the
NAVI TALK
button, wait for the beep, then give a voice command.
• Give a voice command in a clear, natural speaking voice without pausing between words.
• If the system cannot recognize your command because of background noise, speak louder.
• If you are still having trouble with the voice control system, refer to
Voice
Command Help
on the
Information
screen.
Selecting an Item (Button) on the Screen
On most screens, there are items that can be selected (like buttons with titles such as
OK
or
Return
). To select an item on any screen, do one of the following:
• Use the voice control system and say the name of the desired item. Almost all selectable items on the screen, including some listed items, are recognized by the voice control system.
• Touch the desired item on the screen.
• Move the highlighting to the desired item with the joystick, then push in on the joystick.
Tip:
If items are grayed out, this means that they cannot be selected.
Selecting an Item in a List
To scroll through a list, do one of the following:
• Use the joystick to scroll through the list item by item.
• Use the voice control system and say
“Next” or “Previous” or use the “onscreen” scroll up or down buttons, or the
ZOOM
buttons to scroll through the list page by page.
If you cannot find the desired name, or have made an error, return to the previous screen by pressing the
CANCEL
or the
NAVI BACK
button.
To select the desired item in the list, do one of the following:
• Use the voice control system, and say the item number of the desired item.
• Touch the item on the screen.
• Use the joystick to move the highlighting to the item, then push in on the joystick.
14
Navigation System
Using the On-screen
Keyboard
When the system needs input from you, the display changes to a keyboard. Use the displayed letters to enter the information. Enter each letter by one of the following methods:
• Using the voice control system, say the desired letter on the screen.
• Move the highlighting to the desired letter using the joystick, then push in on the joystick.
• Touch the desired letter on the screen.
When speaking the letters or using
“spell mode,” you can substitute the name that represents each letter or symbol. This improves recognition. The system will only respond to the names shown in the following graphic. For example:
• To select the letter “A”: Say, “
A
”;
“
Alpha
”; or “
Apple
.”
• To select the letter “M”: Say, “
M
”;
“
Mike
”; or “
Mary
.”
Getting Started
The names that can be used for each letter are shown below. For additional keyboard symbols, see page 144.
Alpha
Apple
Bravo
Boy
Charlie
Delta
Dog
Echo
Edward
Foxtrot
Frank
Golf
George
Hotel
Henry
India
Igloo
Kilo
King
Lima
Larry
Mike
Mary
November
Nancy
Oscar
Papa
Paul
Quebec
Queen
Romeo
Robert
Sierra
Sam
Tango
Tom
Ampersand
Uniform
Uncle
Victor
Whiskey
William
X-ray
Yankee
Yellow
Zulu
Zebra
Slash
Juliet
John
Apostrophe
Navigation System
15
Getting Started
Each entered letter will appear at the top of the display. Say or select
Space
to enter a space between words. Say or select
Delete
to erase a letter entered incorrectly.
When entering an address, the system searches the database for words that match the letters you are entering. As a result, you will notice that some letters are no longer available.
When the system finds only one entry that matches, it completes the entry of the name for you. If the system finds more than one entry that matches your input, the system displays a list.
Tip:
If you are unsure of the spelling of a name, enter the letters that you are sure of, and then select
List
. The system displays a list of names that most closely matches your input.
You can choose to have your keyboard displayed in alphabetized format as shown below:
Or in a regular keyboard (QWERTY) format as shown below:
System Start-up
When you turn the ignition to ON (II), it takes several seconds for the navigation system to boot up.
The first screen to appear is the navigation system globe
screen. The screen then changes to the Disclaimer screen:
NOTE:
The
OK
button does not appear immediately. It appears after the software is loaded.
See
Keyboard Layout
in the Setup screen (second).
16
Navigation System
Read this disclaimer carefully so you understand it before continuing. Push in on the joystick, or touch
OK
, and the map
screen will appear on the display.
The “OK” cannot be activated by voice.
NOTE:
If you do not select
OK
, and then enter the
Setup
or
Information
screens, some items are not available and will show up as darkened buttons (grayed out). See
System Function Diagram on page 21.
If you do not press the joystick or touch
OK
, the screen will turn to the clock screen after 30 seconds.
If you are not planning to use the navigation system at this time, touch
DISPLAY OFF
to turn off the screen.
By touching
CLOCK TYPE
, you can change the design of the clock
screen.
For details of the clock type, see page 76.
Tip:
For information on clock adjustment, see page 94.
Getting Started
To return to the Disclaimer screen, press the
MENU
or
MAP/GUIDE
button.
If you have entered any Calendar reminders, they are displayed after you select
OK
.
The
Calendar reminder
screen remains displayed until you select
OK
or
Remind Later
, or press the
CANCEL
button.
Navigation System
17
Getting Started
If you select
OK
, the reminder will not show up again. If you wish to have the reminder show up again later in the day, touch the
Remind Later
button.
If you press the
CANCEL
button, the message will be displayed the next time you start the vehicle.
NOTE:
The system will display the current message and any older or previously unread messages, with the newest message listed first.
Bluetooth
®
HandsFreeLink
®
If you have a Bluetooth-compatible cell phone that is paired, then
CALL
on the
Calculate route to screen is enabled.
When you select
CALL
, the system dials the number shown on the screen. If
CALL
is not available (grayed out), and your phone is paired, then make sure the phone has service or that HFL is not in use; press the
HFL BACK
button.
For more information on Bluetooth®
HandsFreeLink®, see the vehicle
Owner’s manual and the official website
(handsfreelink.honda.com).
18
Navigation System
Getting Started
Map Screen Legend
Map Orientation
(see page 55)
“North Up”
“Heading Up”
“Breadcrumbs”
(see Off-road Tracking on page 60)
Landmark Icon - Generic (see page 56)
Honda Dealer
Hospital
Grocery Store
Gas Station
Acura Dealer
School
Restaurant
ATM
Hotel/Lodging
Parking Garage
Parking Lot
Post Office
Freeway Exit Information
GPS Signal Strength
: Best Reception
: Good Reception
Missing: Poor/No Reception
Current Map Scale
(see page 54)
Streets
(see Map Overview on page 6)
Interstates or Freeways
Verified Streets
Unverified Streets
One-Way Traffic Icon (1/20 mile scale only)
(see page 56)
ICON Button
(see page 58)
Map Features
: Park : Water Area
Vehicle Position (see page 61)
(Use voice command “Display the current location,” or touch the icon to show current location.)
Clock
(see page 94)
CURRENT STREET/AUDIO INFO
Status Bar
Current street name or audio information is displayed. You can switch this information by touching CURRENT STREET/AUDIO INFO.
(For information on the Current Street, see page 6.)
NOTE:
See
Map Legend
on the
Information
screen for further explanation.
: Hospital
: Shopping Mall
: Golf Course
: Cemetery
: University
: Indian Reservation
: Airport/Stadium/Business
NOTE:
If you move the joystick over an area (map features shown above), the name is displayed on the screen.
Navigation System
19
Getting Started
Map Screen Description
Zoom In/Out
Use the
ZOOM
buttons to change the scale of the map. Zooming in increases the detail, while zooming out gives you a wide area view. After changing the scale, give the system a few moments to update the display.
Map Scrolling
To view other areas on the map, move the joystick left, right, up, or down. The map will shift in that direction. To return the map to your current location, press either the
MAP/GUIDE
, the
CANCEL
, or the
NAVI BACK
button.
Displaying Current Location
You can say “Display current location” or touch the vehicle position icon at any time to see the current address, latitude, longitude, and elevation. The screen will change to:
You can say “Save current location” or select
Save
on the screen to save the current location in your Address Book.
Select
Return
to return to the previous screen.
NOTE:
The elevation will not appear when the system is temporarily lacking proper
GPS information. The system elevation may not agree with elevations shown on roadside elevation signs, and may fluctuate plus or minus 100 feet or more.
20
Navigation System
System Function Diagram
This diagram shows the navigation system features, starting at the center and working outward in layers. The navigation program starts at “Key ON,” and then displays the globe
screen
(blue). If
OK
is selected on the
Disclaimer screen, the functions in the yellow segments of the diagram become available in the Setup and Information screens.The white segments of the diagram are available anytime, even if you do not select
OK
.
The items above the map screen show various methods to begin driving to your destination (orange). You are provided with map/voice guidance, routing cautions, and a direction list.
While driving to your destination, use the voice control system as much as possible to interact with the navigation and audio systems (green).
Getting Started
VOICE:
VOICE:
"DISPLAY (OR SAVE)
CURRENT LOCATION"
"HOW FAR TO THE
(pg. 138)
(pg.61)
(pg. 63)
VOICE:
IC
C
E
O
M
M
A
N
D
S
(pg. 138)
INFORMATION SCREEN
AUDIO (pg. 141 - 142)
ENTER (pg. 71)
LIST (pg. 71)
MATH (pg. 72)
VOICE:
CONVERT (pg. 73)
LIST (pg. 70)
-
(M
(pg. 143)
A
CALENDAR
CALCUL
D
"MENU" (to
P
/V
R
IV
O
IC
VOICE:
ATOR
MAP LEGEN
D
VOICE HE
E
(pg. 69)
INFO
LP
IN
GU
G T
-
IDA
O YO
SELECT A
E, RO
AUDIO
BUTTO
(pg. 11)
N
OK
UR DESTIN
VOICE: "FIND
NEAREST..."
ATM, ETC.
(pg. 140)
H
D
IS
C
L
A
IM
ER
G
SCREEN
L
O
BE
SCR
KEY
ON
E
N
E
T
(pg
.16
)
PHONEBOOK
REAR CAMERA
(REVERSE)
NAVI AUDIO (pg. 69)
RCH, th e
Fo r m ve hic ore le
BALANCE
CD info
Ow
FUNCTIONS OTHERAUDIO rma ner's tion, s manua
BRIGHTNESSZOOM IN/OUT l
OK
NOT
PRESSED
SCREEN
(FIRST)
SETUP
BRIGHTNESS (pg. 74)
NS,
TH
E
SCREEN
(pg. 22)
JOYSTICK
(pg. 66)
MA
P SCREEN (pg
RE
CALENDAR
MIND
ERS (pg.1
7)
. 1
9)
PRESS
OK
SE
TU
VOLUME (pg. 74)
DISPL
P
DIR
EC
(p g.
AY (pg
ATIO
-
7
4
)
(pg. 68)
O.
N
TIO
N
-
LIS
T
)
VOICE:
"HIDE/DISPLAY ICONS"
(pg. 57, 139)
PERSONAL
BASIC
ROUTING
GUIDANCE
CLOC
K
VEHICLE
VERSION (
GUIDE. PROMPTS
CONTRAST (pg. 76)
(pg. 76)
VOICE:
M OUT"
ADD BOOK (pg. 77)
PINs (pg. 81)
UNITS MI/KM (pg. 93)
UNVERIFIED (p
ADJ. TIME (pg. 94)
CLOCK TYPE
OFF-ROAD TRA
(pg. 60, 91)
POSITION (p pg. 93) g. 92)
(pg. 96)
E
(pg. 95)
CKING
. 75)
Navigation System
21
Entering a Destination
When you press the
MENU
button, the display changes to:
Address
(see page 23)
This selection requires you to enter the city (and possibly the state) and the address that you want to go to.
Intersection
(see page 27)
This selection allows you to enter the names of two intersecting streets in a city. This is useful if you know the general location of your destination, but not the exact address.
Places
(see page 32)
The system has been programmed with the locations of many businesses, parks, hospitals, etc. This selection lets you search these by category, name, or phone number.
Map Input
(see page 36)
This selection allows you to point to a destination on the map using the joystick. This allows you to enter a destination or address that may not be listed in the database.
Previous Destinations
(see page 40)
When you enter a destination with any of the available selections (except
Address Book
and
Go Home
), the last 50 destinations are saved by the system. Use this selection to choose a destination again.
NOTE:
If
Previous Destinations
is grayed out, there are no Previous Destinations entered.
Today’s Destinations
(see page 41)
You can enter and sort up to five destinations and store them in the
Today’s Destinations list. You can then use the Today’s Destination selection.
NOTE:
If
Today’s Destinations
is grayed out, there are no Today’s Destinations entered.
Address Book
(see page 43)
This selection allows you to select a stored address. The system can store up to a combined total of 200 User 1 and
User 2 addresses.
Go Home
(see page 44)
This selection allows you to select your home or a common place as a destination.
NOTE:
If you have no home address entered, the system prompts you for one.
22
Navigation System
By Address
After you select
Address
from the
Enter destination by screen, the display changes to:
Tip:
• When entering an address by voice, it is more efficient to say the city name first, then the street name.
• When entering an address by touch, it is usually easier to enter the street first. A city or cities that the street appears in will be displayed. For your convenience, you do not have to enter both city and street.
NOTE:
• If you find that your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
Selecting the State or Province
The state you are in is displayed at the top of the screen. If your desired destination is in another state, select
Change State
.
The display then changes to the
Enter state name
screen. Use the voice control system and say the name of the state or use the on-screen keyboard to enter the name of the state.
Entering a Destination
Selecting the City
This is helpful if the street runs through several cities, and you know what city includes the street. The city you are in is displayed on the screen. If the city you want is displayed on the screen, say
“Select current city.” If your desired destination is in another city, say or enter that city.
By Voice Control:
Say “City” on the
Find address by screen, and the display changes to the
Say city name screen. Say the city name and the searching will begin.
NOTE:
To improve voice recognition when saying the city name, pronounce the syllables as clearly as possible.
Navigation System
23
Entering a Destination
To enter the city name by voice spelling, say or select
CHANGE TO Spell
Mode
on the Say city name screen, and the display will change to the
Enter city name
screen. Say the city name by saying individual letters, or words that represent the letters, one at a time.
The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear:
By Touch Control:
Select
City
, and the display then changes to the
Enter city name
screen.
Use the on-screen keyboard to enter the name of the city.
The system will display a list of city names, with the closest match to the name you entered at the top of the list.
Select the number (1-6) of the desired city from the list.
You should select a letter by saying the number.
Alternatively, to improve voice recognition, you can say “Echo” or
“Edward” instead of “E.”
See page 15 for a list of available words for each letter.
24
Navigation System
If the system does not find an exact match, select
List
when you finish entering the name of the city. Most of the cities and towns for that state are listed.
Listings of cities and towns in the nondetailed coverage area may have an asterisk “*” next to their names. If you select one, a pop-up box is displayed saying, “No detailed street data...”, and a street address cannot be entered (see
Map Coverage on page 108). Try entering the street first, and then select the city if available.
Select
View Dest. Map
and use the joystick to select an icon, approximate area, or street you wish to choose as your destination. Otherwise, a central location of the city will be selected. If you select a point of interest (POI) or road in an unverified area, you may or may not have routing in these areas. See
Map Overview on page 6.
Selecting the Street
By Voice Control:
After you have selected the city, or if you say “Street” on the Find address by
screen, the display changes to the
Say street name
screen. Say the street name and the searching will begin.
To enter the street name by voice spelling, say or select
CHANGE TO
Spell Mode
on the Say street name screen, and the display will change to the Enter street name screen.
Entering a Destination
Say the street name by saying individual letters or numbers, or words that represent the letters, one at a time.
Navigation System
25
Entering a Destination
The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear:
You should select a letter by saying the number.
Alternatively, to improve voice recognition, you can say “Echo” or
“Edward” instead of “E.”
See page 15 for a list of available words for each letter.
By Touch Control:
After you have selected the city, or if you selected
Street
in the beginning, the display changes to the
Enter street name screen. Use the on-screen keyboard to enter the name of the street
(like ELM or 42ND) that is your destination.
To enter the name of a major highway, you must use the full name, including a hyphen. For interstates, use an “I” (I-
10). For U.S. highways, use “US” (US-
18). For state highways, use the two character state designation (CA-101).
For county roads, use the appropriate designation (G-2, for example).
Tip:
When entering a street, you do not need to enter the direction (N, S, E, W) or the type (St, Ave, etc.). The system will automatically determine that for you, based on your entered city and street number.
The system will display a list of street names, with the closest match to the name you entered at the top of the list.
Select the number (1-6) of the desired street from the list.
26
Navigation System
Entering the Street Number
After you have completed the street name, the display changes to the Enter street number screen. Use the voice control system and say the address number as a continuous string of numbers. For example, the address 1527 should be spoken as “One, five, two, seven.” You can also use the on-screen keyboard to enter the street number.
Some address numbers may not be available on the selected street. For example, let’s say the individual address ranges for a selected street name are 1 -
20 and 9,000 - 10,000, with an overall range shown on the display of 1 to
10,000. If you try to enter a number outside the individual address ranges such as 500, the system will show this number as unavailable (grayed out).
• When using the on-screen keyboard, the system only allows you to choose available address numbers.
• When using voice control, the system beeps if you try to select an unavailable (grayed out) address number.
If you did not select a city in the beginning, the street name you selected might appear in more than one city. The system will give you a list of cities that the street appears in. Select the desired city from the list. The system then displays the
Calculate route to
screen
(see Driving to Your Destination on page 45).
Tip:
If the particular address you want cannot be found, select
Map Input
and use the joystick to select the appropriate
location on the map (see By Map Input
on page 36).
Select
View Dest. Map
and use the joystick to select an icon, approximate area, or street you wish to choose as your destination. Otherwise, a central location of the street will be selected. If you select a point of interest (POI) or road in an unverified area, you may or may not have routing in these areas. See
Map Overview on page 6.
Entering a Destination
By Intersection
After you select
Intersection
from the
Enter destination by screen, the display changes to:
Tip:
When entering an address, it is usually easier to enter the street first. A city or cities that the street appears in will be displayed. For your convenience, you do not have to enter both city and street.
Navigation System
27
Entering a Destination
NOTE:
• If you find that your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
Selecting the State or Province
The state you are in is displayed at the top of the screen. If your desired destination is in another state, select
Change State
.
The display then changes to the
Enter state name
screen. Use the voice control system and say the name of the state or use the on-screen keyboard to enter the name of the state.
Selecting the City
This is helpful if the street runs through several cities, and you know what city includes the street. The city you are in is displayed on the screen. If the city you want is displayed on the screen, say
“Select current city.” If your desired destination is in another city, say or enter another city.
By Voice Control:
Say “City” on the
Find intersection by screen, and the display changes to the
Say city name screen. Say the city name and the searching will begin.
To enter the city name by voice spelling, say or select
CHANGE TO Spell
Mode
on the Say city name screen, and the display will change to the
Enter city name
screen.
Say the city name by saying individual letters, or words that represent the letters, one at a time.
28
Navigation System
The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear:
By Touch Control:
Select
City
, and the display then changes to the
Enter city name
screen.
Use the on-screen keyboard to enter the name of the city.
The system will display a list of city names, with the closest match to the name you entered at the top of the list.
Select the number (1-6) of the desired city from the list.
You should select a letter by saying the number.
Alternatively, to improve voice recognition, you can say “Echo” or
“Edward” instead of “E.”
See page 15 for a list of available words for each letter.
Entering a Destination
If the system does not find an exact match, select
List
when you finish entering the name of the city. Most of the cities and towns for that state are listed.
Listings of cities and towns in the nondetailed coverage area may have an asterisk “*” next to their names. If you select one, a pop-up box is displayed saying, “No detailed street data...”, and a street address cannot be entered (see
Map Coverage on page 108).
Select
View Dest. Map
and use the joystick to select an icon, approximate area, or street you wish to choose as your destination. Otherwise, a central location of the city will be selected. If you select a point of interest (POI) or road in an unverified area, you may or may not have routing in these areas. See
Map Overview on page 6.
Navigation System
29
Entering a Destination
Selecting the Street
By Voice Control:
After you have selected the city, or if you say “Street” on the Find intersection by
screen, the display changes to the
Say street name
screen.
Say the street name and the searching will begin.
Say the street name by saying individual letters or numbers, or words that represent the letters, one at a time.
The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear:
To enter the street name by voice spelling, say or select
CHANGE TO
Spell Mode
on the Say street name screen, and the display will change to the
Enter street name
screen.
After you have completed the first name, the display changes to the Say intersecting street
screen. Say the name of the other intersecting street.
You should select a letter by saying the number.
Alternatively, to improve voice recognition, you can say “Echo” or
“Edward” instead of “E.”
See page 15 for a list of available words for each letter.
30
Navigation System
By Touch Control:
After you have selected the city, or if you select
Street
in the beginning, the display changes to the
Enter street name screen. Use the on-screen keyboard to enter one of the names (like
ELM or 42ND) of the intersecting streets.
To enter the name of a major highway, you must use the full name, including a hyphen. For interstates, use an “I” (I-
10). For U.S. highways, use “US” (US-
18). For state highways, use the two character state designation (CA-101).
For county roads, use the appropriate designation (G-2, for example).
Tip:
When entering a street, you do not need to enter the direction (N, S, E, W) or the type (St, Ave, etc.). The system will automatically determine that for you.
The system will display a list of street names, with the closest match to the name you entered at the top of the list.
Select the number (1-6) of the desired street from the list.
After you have completed the first street name, the display changes to the
Enter intersecting street
screen.
Enter the name of the other intersecting street using the on-screen keyboard.
Entering a Destination
If you did not select a city in the beginning, and the intersection appears in more than one city, you will see the
Select a city
screen. The system will give you a list of cities that the intersection appears in. Select the desired city from the list. If more than one intersection appears in a city, select the desired intersection from the Select an intersection screen. The system then displays the
Calculate route to screen (see Driving to Your Destination on page 45).
Tip:
If the particular intersection you want cannot be found, select
Map Input
and use the joystick to select the appropriate
location on the map (see By Map Input
on page 36).
Select
View Dest. Map
and use the joystick to select an icon, approximate area, or street you wish to choose as your destination. Otherwise, a central location of the street will be selected. If you select a point of interest (POI) or road in an unverified area, you may or may not have routing in these areas. See
Map Overview on page 6.
Navigation System
31
Entering a Destination
By Places
After you select
Places
from the Enter destination by screen, the display changes to:
There are three ways to find a place or point of interest (POI), by
Category
,
Name
, or
Phone Number
.
Let’s assume you want to find a coffee shop (restaurant) called “Bucks.”
• If you know the phone number of the coffee shop, select
Phone Number
, then enter the 10-digit number with area code. This is the quickest way to find it.
• The second best method is to select
Category
,
Restaurant
, and type of food. After you select
Place Name by Keyword
and search method, enter the keyword “Bucks.” The list will include all restaurants that have the letters “bucks” anywhere in the name.
• You can try to enter “Bucks” using
Name
, but you may have to search through a list that might include
Bucks Welding, Bucks Surplus, etc.
NOTE:
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• You can enter the desired destination using the voice control system. For information on the available voice
commands, see Voice Command
Index on page 138.
Finding the Place by Category
The
Category
option gives you a list of categories or types of businesses to select from with the following screen:
Tip:
If you are not sure of the spelling of a place, the best way to find it is to use the keyword search. Select
Category
, choose a category and subcategory from the menus, then select
Place
Name by Keyword
, and enter the partial name.
32
Navigation System
Auto Service
The subcategories are Acura Dealers,
Honda Dealers, Gas Stations, etc.
Banking
The subcategories are ATM, Bank, etc.
Community
The subcategories are City Hall, Civic/
Community Center, Convention/
Exhibition Center, Court House, Higher
Education, Library, Post Office, School, etc.
Emergency
The subcategories are Hospital, Police
Station, Roadside Assistance, etc.
Lodging
The subcategories are Bed & Breakfast,
Hotel/Motel, etc.
Leisure
The subcategories are Amusement Park,
Golf Course, Historical Monument,
Marina, Movie Theater, Museum, Park/
Recreation Area, Performing Arts,
Sports Complex, and Tourist Attraction.
Restaurant
This category is broken down into types of food, giving you a selection by each type: All Types, American, French,
Japanese, etc.
Tip:
When trying to find a specific restaurant, select the category
ALL
TYPES
. Some restaurants may be miscategorized.
Shopping
The subcategories are All Shopping,
Accessories/Jewelry, Auto Parts &
Electronics, Books/Music/Video,
Clothing, Groceries, Home
Improvement, Mall/Department Store,
Office Supplies/Electronics, Pharmacy/
Drug Store, Pet Food/Supplies, Sewing/
Linen, Shoes/Bags, Sporting Goods, and
Toys/Arts/Crafts.
Tip:
When trying to find a specific store, select the category
ALL SHOPPING
.
Some stores may not be in the right category.
Entering a Destination
Travel
The subcategories are Airport,
Automobile Club, Bed & Breakfast, Bus
Station, Camping, Commuter Rail
Station, Ferry Terminal, Hotel/Motel,
Named Place, Park & Ride, Parking
Garage/House, Parking Lot, Rental Car
Agency, Resort, Rest Area, Tourist
Information, Train Station, etc.
Advanced
If you do not find the category or subcategory you need in the other options, you can find the categories with a keyword. When you select this option, the display changes to the
Enter keyword for category
screen. Enter the keyword using the on-screen keyboard.
When the system finds the categories with the keyword you entered, the display changes to the
Select a category
screen.
Select the desired category.
Navigation System
33
Entering a Destination
After selecting a category, the system will give you the options of
Place
Name by Keyword
,
Sort by
Distance to Travel
,
City Vicinity
, or
Place Name
with the following screen:
Place Name by Keyword
If you do not know the exact name of the destination, you can find the place with a keyword. When you select this option, the display changes to:
If you select the
Sort by Distance to
Travel
option, the Enter keyword for place screen appears. Enter the keyword using the on-screen keyboard.
If the system does not find an exact match, select
List
when you finish entering the keyword. The system starts searching for places that match the entered keyword. If you see your desired place, select it from the list.
If not, scroll through the list to find the desired place.
You can find your destination with a keyword using the
Sort by Distance to Travel
option or
City Vicinity
option.
34
Navigation System
If you select the
City Vicinity
option, the Enter city name screen appears.
Enter the name of the city using the onscreen keyboard. The system will display a list of city names, with the closest match to the name you entered at the top of the list. Select your desired city name from the list. Once you have selected your desired city name, the
Enter keyword for place screen appears. Enter the keyword using the on-screen keyboard to specify the desired place.
Once you select a place, the system then displays the Calculate route to screen
(see Driving to Your Destination on page 45).
Sort by Distance to Travel
When you select this option, the system gives you a list of all the places in the subcategory. This list is arranged by distance from your current location, with the closest at the top of the list.
The distance and direction to the destination at the top of the list are shown in the screen. The distance shown is straight line distance (as the crow flies), not driving distance. Select the number (1-4) of the desired destination from the list.
Once you select a place, the system then displays the Calculate route to screen
(see Driving to Your Destination on page 45).
Entering a Destination
City Vicinity
The system allows you to find points of interest in the vicinity of the city you entered. When you select this option, the display changes to Enter city name screen. Enter the name of the city using the on-screen keyboard. If the system does not find an exact match, select
List
when you finish entering the name of the city. Select a desired city from the list.
Once you have selected the city, the display changes to Enter a place name screen. Enter the name of the place using the on-screen keyboard.
Once you select a place, the system then displays the Calculate route to screen
(see Driving to Your Destination on page 45).
Navigation System
35
Entering a Destination
Place Name
When you select this option, the display changes to
Enter a place name
screen.
Enter your selection, using the onscreen keyboard.
Once you select a place, the system then displays the
Calculate route to
screen
(see Driving to Your Destination on page 45).
Finding the Place by Name
The
Name
option allows you to enter the name of a business, and then shows you a list of businesses with the same or similar names to select from. Use the name option only if you know the exact spelling of the place. If unsure, use the
Category
option.
Finding the Place by Phone
Number
The
Phone Number
option allows you to select a destination by its telephone number. Only telephone numbers stored in the system under the
Places
(of business) option are recognized. The system does not contain residential telephone numbers, or numbers you may have entered in your personal Address Book.
Tip:
If you know the phone number of a point of interest (POI), its uniqueness makes it the fastest entry method. When using the voice control system, the entry should be spoken as a continuous string of numbers. For example, the telephone number (310) 555-4000 should be spoken as “Three, one, zero, five, five, five, four, zero, zero, zero.”
By Map Input
After you select
Map Input
from the
Enter destination by screen, the display changes to:
NOTE:
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• For information on the available
voice commands, see Voice
Command Index on page 138.
36
Navigation System
Showing the Map of Current
Position
The
Current Position
selection assumes that you are looking for a destination in the immediate area. The display changes to:
The red arrow indicates your vehicle position. Find your desired destination by moving the joystick left, right, up, or down. The map and crosshairs will move in the same direction.
The yellow box indicates the area you will see when you click on the current map with the joystick. The scale will decrease each time you push in on the joystick, until Select a destination appears at the top of the screen.
If desired, use the
ZOOM
buttons to change the map scale. When you have the crosshairs on the desired icon, map feature, or road, push in on the joystick.
The address of the location will appear at the top of the screen.
NOTE:
The selected icon or road segment is displayed on the 1/2 mile (800 meter) or less map scale.
If this is the desired destination, push in on the joystick again. If not, use the joystick to reposition the crosshairs, then push in on the joystick again to display the new address.
Entering a Destination
If you selected a single icon or road segment within the target mark, the following screen appears. Push in on the joystick again to calculate a route to the selected destination.
Navigation System
37
Entering a Destination
If you selected multiple icons within the cursor radius, the following screen appears. Select an item from the list.
Then select
OK
to calculate a route to the selected destination.
Once you select an address, the system then displays the
Calculate route to screen (see Driving to Your Destination on page 45).
Showing the Map of City
With the
City
selection, the display changes to the Enter city name screen.
When you have entered the desired city, the display changes to a map. The starting location will be the central position in the selected city.
See Showing the Map of Current
Position on page 37 for instructions on finding and entering your desired destination.
Showing the Map of State
With the
State
selection, the display changes to the Enter state name screen.
After you select the desired state, the display changes to a map of the state, with the crosshairs located near the middle.
The yellow box indicates the area you will see when you click on the current map with the joystick. The scale will decrease each time you push in on the joystick, until
Select a destination appears at the top of the screen.
38
Navigation System
Use the joystick to move the crosshairs to the area of the state close to your intended destination. If desired, use the
ZOOM
buttons to change the map scale.
When you have the crosshairs in the desired area, push in on the joystick.
The address of the location you have selected will appear at the top of the screen.
NOTE:
The selected icon or road segment is displayed on the 1/2 mile (800 meter) or less map scale.
If this is the desired address, push in on the joystick again. If not, use the joystick to reposition the crosshairs, then push in on the joystick again to display the new address.
If you selected a single icon or road segment, push in on the joystick again to select the new address. If you selected multiple icons within the cursor radius, select an item from the list on the screen.
Once you select an address, the system then displays the Calculate route to screen (see Driving to Your Destination on page 45).
Showing the Map of Continental
USA
Entering a Destination
With the
Continental USA
the display changes to:
selection,
The yellow box indicates the area you will see when you click on the current map with the joystick. The scale will decrease each time you push in on the joystick, until Select a destination appears at the top of the screen.
Use the joystick to move the crosshairs to the area of the country for your intended destination. Then push in on the joystick.
Navigation System
39
Entering a Destination
If desired, use the
ZOOM
buttons to change the map scale. When you have the crosshairs on the desired icon, map feature, or road, push in on the joystick.
The address of the location you have selected will appear at the top of the screen.
NOTE:
The selected icon or road segment is displayed on the 1/2 mile (800 meter) or less map scale.
If this is the desired address, push in on the joystick again. If not, use the joystick to reposition the crosshairs, then push in on the joystick again to display the new address.
If you selected a single icon or road segment, push in on the joystick again to select the new address. If you selected multiple icons within the cursor radius, select an item from the list on the screen.
Once you select an address, the system then displays the Calculate route to screen (see Driving to Your Destination on page 45).
By Previous Destinations
Every time you route to a destination, that destination is saved by the system.
Up to 50 destinations can be stored.
Select
Previous Destinations
from the
Enter destination by
screen to choose one of those destinations.
After you select
Previous
Destinations
, the display lists the last
50 destinations entered, with the most recent appearing first.
NOTE:
• If
Previous Destinations
is grayed out, there are no Previous
Destinations entered.
• When finishing a “Today’s
Destinations” trip, the Today’s
Destinations list entries are stored to this list, beginning with the date (e.g., item 1 shown on the previous screen).
• Because both the Home address and personal Address Book list can be protected by a PIN, they do not show up in the previous destination list.
40
Navigation System
Scroll through the list and say the line number (1-6) of the destination, or touch the desired destination you want.
Once you select the desired destination, the system then displays the
Calculate route to
screen (see Driving to Your
Destination on page 45).
NOTE:
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• For information on the available
voice commands, see Voice
Command Index on page 138.
By Today’s Destinations
You can create a “trip” by combining up to five destinations previously selected on the Calculate route to screen.
Select
Today’s Destinations
from the
Enter destination by
screen and the display changes to:
NOTE:
If
Today’s Destinations
is grayed out, there are no Today’s Destinations entered.
Entering a Destination
Editing Today’s Destinations
List
If you change your plans, you can modify the Today’s Destinations list order by distance, or by order of entry.
Say or select
Input
to sort the list by the entry order, and say or select
Distance
to sort the list by the distance order. To delete a destination, say or select
Delete
and the display changes to
Select a destination to delete
screen.
Select the destination to delete and say or select
Done
to perform the deletion, and the display returns to the previous screen. To cancel the deletion, press the
CANCEL
button.
NOTE:
For information on the available voice
commands, see Voice Command Index
on page 138.
Navigation System
41
Entering a Destination
Adding Destinations to the List
After you have used any of the other selections from the Enter destination by screen to select a destination, the display changes to:
The display then changes to show you all the current entries on the Today’s
Destinations list. Press the
MENU
button to return to the
Enter destination by
screen.
The system automatically sorts the destinations stored in the Today’s
Destinations list for the best path.
NOTE:
When finishing a “Today’s
Destinations” trip, the Today’s
Destinations list entries are stored to the Previous Destinations list, beginning with the date (e.g., item 1 shown below). This entry contains all the destinations that were included in the Today’s Destinations itinerary. This allows you to reselect the entire Today’s
Destinations content at a later date.
To add this to the Today’s Destinations list, select ADD TO
Today’s Dest
.
NOTE:
If ADD TO
Today’s Dest
is grayed out, the Today’s Destinations list is already full (five destinations have been stored).
If the displayed list shows your plans, select the first destination. The system will guide you to the destination according to the order of the list. When you reach the destination, it will be automatically removed from the list.
42
Navigation System
By Address Book
This selection allows you to choose a personal address entry for a destination.
After you select
Address Book
from the
Enter destination by
screen, the display changes to:
The system then displays a list of the places entered in your personal Address
Book. Selecting
Category
, you can sort the displayed addresses by
ALL
,
BUSINESS
,
PERSONAL
, or by other categories you may create.
If an
Address Book PIN
has been set in Setup, the system prompts you to enter your PIN after you select
User 1
or
User 2
. Say or enter your PIN, and say or select
Done
.
If the PIN has not been entered, the system displays the list after you select
User 1
or
User 2
.
Scroll through the list to find your desired destination. After you select it, the system then displays the Calculate route to screen (see Driving to Your
Destination on page 45).
Entering a Destination
Adding Addresses to the
Personal Address Book
There are two ways to enter addresses to the personal Address Book:
• Entering them in the personal
Address Book feature in Setup (see page 77).
• Adding them in the Address Book directly from the
Calculate route to screen (see page 45).
NOTE:
• Destinations chosen from the Address
Book do not show up in Previous
Destinations.
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• For information on the available
voice commands, see Voice
Command Index on page 138.
Navigation System
43
Entering a Destination
By Go Home
Selecting
Go Home
from the Enter destination by screen takes you home or to a frequently used address you have chosen.
If a
Go Home PIN
has been set in
Setup, the system prompts you to enter your PIN. Say or enter your PIN, and say or select
Done
. The system will then display the
Calculate route to screen (see Driving to Your Destination on page 45).
If a
Go Home PIN
has not been set, the system displays the Calculate route to screen after you select
Go Home
(see
Driving to Your Destination on page 45).
NOTE:
• To edit Home Address, see Home
Address in System Setup on page 81.
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• PINs are optional. If you choose to use a PIN, make sure you remember it. If you forget your PIN, your dealer will have to reset it for you.
• If a PIN is desired, enter it using the
Personal preference PIN number feature in Setup. See page 82 for information on entering your Go
Home PIN.
44
Navigation System
Driving to Your Destination
A route typically has three phases.
• Initial route calculation (
Calculate route to screen) (see page 45).
• Change the route while en route (see page 63).
• Resume the route when restarting the engine (see Continue Trip Screen on page 68).
Calculate Route to Screen
Say or select
OK
. The system calculates the route using the method shown on the screen (see Map Screen on page 48).
NOTE:
• Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See
Edit Avoid Area on page 88.
• For information on the available
voice commands, see Voice
Command Index on page 138.
Driving to Your Destination
Further selections from the Calculate route to screen include:
ADD TO Address Book
Allows you to add the destination to your Address Book. See By Address
Book on page 43.
NOTE:
If the button is grayed out, the destination is already in your Address
Book.
ADD TO Today’s Destinations
Allows you to add the destination to your Today’s Destinations list. See By
Today’s Destinations on page 41.
NOTE:
If the button is grayed out, the Today’s
Destinations list is already full (five destinations have been stored).
CALL
Dials the number on the screen when available. See Bluetooth®
HandsFreeLink® on page 18.
Navigation System
45
Driving to Your Destination
Changing the Routing Method
The system lets you select the way you want to drive to your destination. Before selecting
OK
to calculate a route, you can change the routing method by using the
CHANGE METHOD
scroll bar back ( ) or forward ( ) buttons. The route choices will appear in the address box.
NOTE:
When you are en route and want to change the routing method, press the
MENU
button, and select
Change
Routing Method
on the
Change route by
screen.
• “Direct Route” (the factory default) is the route that is the quickest (least time) and is usually the best choice. If you choose any other method, it becomes the new default for all future routing. Make sure to check the routing method if the displayed route is not what you expected to see.
• “Easy Route” produces a route with the least turns.
• “Maximize Freeways,” “Minimize
Freeways,” and “Minimize Toll
Roads” are also available.
NOTE:
If the trip is greater than 100 miles, then
“Minimize Freeways” and “Minimize
Toll Roads” may be grayed out. This is normal.
The generated route may not be the route you would choose. For safety reasons, the system generally applies the following rules to your route:
• It tries to avoid shortcuts through residential areas.
• Right turns are favored over left turns or U-turns.
• Restricted turns (turns that cannot be made during certain hours) are not used for routing.
46
Navigation System
Viewing the Routes
Touching
View Routes
on the
Calculate route to screen allows you to scroll through and view the various routes (Direct, Easy, Maximize
Freeways, etc.) to your destination. If you select
View Routes
, the display changes to:
NOTE:
• You may only view routes as shown above from the
Calculate route to screen.
• The selected route method and pertinent details are shown at the top of the screen.
• It may take several minutes (the system displays an hourglass while it is calculating) to show all route methods, and it is not unusual for the different methods to pick the same route. Voice commands cannot be used while the system is calculating.
• If the trip is greater than 100 miles, then “Minimize Freeways” and
“Minimize Toll Roads” may be grayed out. This is normal.
Say or select
Summary
to display the distance and time to go for each route.
Based on the route data, you can change the routing by using the
Next
and
Prev.
buttons. Once you confirm your selection, say or select
OK
on the screen.
Driving to Your Destination
NOTE:
Distances and times shown for each method in the Summary are approximate.
After calculating the route with the new method, the system displays a map of your current location. The calculated route will be highlighted as a blue line, and a voice prompt will tell you how to proceed along the highlighted route.
Touch
VOICE
to have the guidance repeated.
Navigation System
47
Driving to Your Destination
Viewing the Destination Map
Touching
View Dest. Map
displays a map of the destination vicinity. Press the
CANCEL
or
NAVI BACK
button to return. You can view the destination map anytime while en route by saying,
“Display destination map.”
Map Screen
When you select
OK
on the Calculate route to screen, the map screen appears, showing your highlighted route in real time.
Route Line
When driving to a destination on verified roads in a metropolitan area, the route line is displayed as a blue line.
When driving in rural areas on unverified streets (light brown color), the route line changes to either a blue dotted “vector line” pointing to your destination, or a blue-pink line. See
Unverified Area Routing on page 84 for a detailed explanation of how to enable unverified routing, and the related cautions and disclaimers.
NOTE:
You can always view the entire route by simply saying, “Display entire route.”
“Vector line” (unverified routing off)
Blue-pink unverified route line
(unverified routing on)
48
Navigation System
Guidance Prompts
As you get near the maneuver, you will hear a voice reminder and see a pop-up window showing you the maneuver.
The number of reminders that you will hear before a maneuver is determined by
Guidance Prompts
in Setup on page 76.
With the factory default (Max), typically you will hear two prompts:
• The first is about 1/4 mile from the maneuver.
• The final maneuver is close to your actual turn.
If the distance between the next two driving maneuvers is very small, both maneuvers are displayed on the screen in a single window, and the voice will remind you of both of them at the same time.
NOTE:
• You can say “Voice” or select
VOICE
on the screen at any time to be reminded of the next maneuver.
• Typically, a pop-up guidance window shows your next turn, and a voice guidance prompt is heard. The timing of these prompts varies, depending on the type of road you are on, and the distance to your next maneuver.
When given guidance in unverified areas, the words “if possible” are inserted before each guidance prompt.
See Unverified Area Routing on page 84 for more details about unverified routing.
Driving to Your Destination
Navigation System
49
Driving to Your Destination
Map Screen Legend
Distance to Destination
(see page 52)
Direction of Destination
(When en route)
(see page 52)
Map Orientation
(see page 55)
“North Up”
“Heading Up”
Time to Destination
(see page 52)
Waypoint
(When en route)
(see page 63)
“Breadcrumbs”
(see Off-road
Tracking on page 60)
Map Scale Adjustment
(Mile or km per half-inch appears only when you
ZOOM IN or OUT.)
(see page 54)
Current Map Scale
(see page 54)
ICON Button
(see page 58)
VOICE Button (see page 49)
(Announces next driving instruction)
Vehicle Position(see page 61)
(Use voice command, “Display current location,” or touch the icon to show the current location.)
CURRENT STREET/
AUDIO INFO
Blue Line
Calculated route
(see page 48)
Current Street (see page 6)
(When audio information is displayed, touch CURRENT STREET/AUDIO INFO to display the current street name.)
NOTE:
See
Map Legend
from the
Information
screen for further explanation (see page 70).
Map Features
: Park
: Hospital
: Shopping Mall
: Water Area
: Cemetery
: University
: Golf Course : Indian Reservation
: Airport/Stadium/Business
NOTE:
If you move the joystick over an area (map features shown above), the name is displayed on the screen.
One-Way Traffic Icon (1/20 mile scale only)
(see page 56)
Destination Icon
(see page 56)
Streets
(see Map Overview on page 6)
Interstates or Freeways
Verified Streets
Unverified Streets
Landmark Icon - Generic (see page 56)
Honda Dealer
Hospital
Grocery Store
Acura Dealer
School
Restaurant
Gas Station
Hotel/Lodging
ATM
Parking Lot
Parking Garage Post Office
Freeway Exit Information
50
Navigation System
Guidance Screen
The guidance screen offers an alternative way to view your route information.
Many of the icons and screen features are similar to those on the map
screen. While driving to your destination, press the
MAP/GUIDE
button to switch between the map and guidance screens. The guidance screen shows you:
Milestone to Destination – The position of the small circular icon shows your trip progress. As you get closer to your destination, the indicator will approach “DEST.”
Vehicle Heading – The white portion of the compass symbol indicates north.
NOTE:
• The map and voice guidance in unverified areas differ from those in verified areas.
• Current maneuvers and those within
1000 feet will show on the
Countdown bar, indicating the distance until the next maneuver.
Driving to Your Destination
Guidance Screen Legend
Freeway Exit Information (see page 53)
Vehicle Heading (white indicates north) ( see page 51 )
Direction of Destination, “as the crow flies” (see page 52)
Scroll: to view guidance maneuvers
Distance to Next Driving Maneuver
Street Name of Next
Driving Maneuver
Distance to Destination
(see page 52)
Time to Destination
(see page 52)
CURRENT STREET/AUDIO INFO
Current Street (see page 6)
(When audio information is displayed, touch CURRENT STREET/
AUDIO INFO to display the current street name.)
VOICE Button
(announces next driving instruction) (see page 49)
Milestone to Destination
(see page 51)
Navigation System
51
Driving to Your Destination
Distance and Time to
Destination
When you select a destination, the distance to the destination is the actual road distance of the calculated route, and not “as the crow flies.” When viewing a list of destinations (points of interest), such as restaurants, the distance is “as the crow flies” (see Sort
by Distance to Travel on page 35).
The displayed time to the destination may differ from the actual travel time because the time is calculated based on the posted road speed data and your current speed. If part of your route includes unverified roads, the “distance” and “time to go” for that portion is estimated using 25 mph as an average speed.
Direction List
When you press the
MAP/GUIDE
button on the guidance screen, the display changes to:
NOTE:
• The map and voice guidance in unverified areas differ from those in
verified areas. See Unverified Area
Routing on page 84.
• Only maneuvers that occur at freeway exits or contain freeway exit information will show the exit info icon (“i” icon) on the right end of the items in the Direction list. If no exit info icon is shown on the list, the
Exit
Info.
is grayed out.
You can see the Direction list and the distance to each maneuver. Press the
MAP/GUIDE
button to return to the previous screen.
You can scroll through the Direction list screen by screen using the scroll bar, or one instruction at a time using the joystick.
52
Navigation System
Exit Info. (Freeway Exit
Information)
You can search freeway exit information and add new destinations or waypoints to the calculated route as a new destination or waypoint. The exit info icon (“i” icon) on the right end of the items in the direction list indicates that there is freeway exit information available. Say or select
Exit Info.
, and choose the exit and place to set as a new destination or waypoint.
On the map screen, you can display freeway exit information using the joystick. The exit info icon will only be displayed on the map
screen if there is any freeway exit information available.
Choose the 1/4, 1/2, or 1 mile scale, then move the crosshairs to the desired exit info icon and click on it. Choose a place from the list and set it as a new destination or waypoint.
NOTE:
To turn on “Freeway exit information” on the
map
screen, display the icon bar and select the “i” icon (see page 58).
Split-Screen Guidance
When en route to a destination, you have two display options: single-screen mode (the factory default) and splitscreen mode.
Single-screen mode – A map is displayed with occasional guidance pop-up windows as you approach a maneuver.
Split-screen mode – The map is always displayed on the left of the screen, and the maneuver or direction list is displayed on the right-hand side of the screen.
Guidance mode can be changed in either
Setup (see Guidance Mode on page 91), or by accessing the icon bar
(see Guidance Mode on page 58) .
Driving to Your Destination
When you get near the maneuver, the map screen changes to:
On the map screen, the location of the maneuver is marked with a small yellow square. The guidance window is simply an enlargement of the area indicated by the yellow square. After you complete the maneuver, the display returns to a full map screen when the single-screen mode is set, or to a map and direction list screen when the split-screen mode is set.
Navigation System
53
Driving to Your Destination
Map Scale
Use the
ZOOM
buttons or say a voice command such as “Display 1/2 mile scale” (see page 139) to change the scale of the map.
Zooming in increases the detail, while zooming out gives you a view of a wider area. After changing the scale, give the system a few moments to update the display.
Functions available at various map scales
Map Scale (English and Metric)
For selecting units, see page 93.
POI icon symbols (like ATM) page 56
Breadcrumbs (off-road tracking dots) page 60
Freeway exit information icons page 53
One-way traffic icon page 56
Unverified road display (light brown) page 84
Map orientation “Heading-up”
Map orientation “North-up” page 55 page 55
Map features (like park, golf course) page 50
Avoid area shown on map page 88
Avoid area scales (when creating)
Waypoint “flag” icons page 88 page 63
X
X
X
X
X
X
1/20 mi. 1/8 mi.
1/4 mi.
1/2 mi.
1 mi.
2 mi.
5 mi.
15 mi.
50 mi.
150 mi.
350 mi.
80 m 200 m 400 m 800 m 1.6 km 3 km 8 km 24 km 80 km 240 km 560 km
X X
X X X
X
X
X X
X
X X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NOTE:
• You can change between miles or kilometers in Setup (see Units on page 93).
• For information on the available voice commands, see Voice Command Index on page 138.
54
Navigation System
Map Orientation
The map can be orientated two ways:
• North-up: North pointing up as you would normally view a paper map.
• Heading-up: The map constantly rotates so the road you are driving on always points up (as you see the road through your front windshield).
“North Up”
“Heading Up”
Touch the Map Orientation icon on the map screen to switch between the available orientation, or say “Display heading up” or “Display north up.”
In the larger map scales (above
1 mile or 1.6 kilometer), the map is always oriented with north facing upward. You cannot change the orientation.
To view other areas on the map, move the joystick left, right, up, or down. The map will shift in that direction. To return the map to your current location, press either the
MAP/GUIDE
, the
CANCEL
, or the
NAVI BACK
button on the steering wheel.
Driving to Your Destination
The display automatically changes to the map screen when you reach your destination. Press the
MENU
button to return to the
Enter destination by screen.
NOTE:
• For information on the available
voice commands, see Voice
Command Index on page 138.
• If you are en route and the joystick is moved, the “Time to Destination” and “Distance to Destination” indications are replaced with an indicator showing distance from the current vehicle location.
NOTE:
The red arrow in both heading symbols always shows the direction north.
Navigation System
55
Driving to Your Destination
Destination Icon
The destination icon only shows the approximate location of the destination.
This occurs because a city block can have as many as 100 possible addresses
(for example, the 1400 block is followed by the 1500 block). Most cities use only a portion of the 100 possible addresses
(for example, in the 1400 block, the addresses may only go up to 1425 before the 1500 block starts). Therefore, the address 1425 will be shown a quarter of the way down the block by the system instead of near the end of the block where the destination is actually located.
Tip:
When en route, you can view a map showing your destination. Using voice control, say “Display destination map.”
Landmark Icons
Landmark icons are shown in the map screen on the 1/20 and 1/8 mile scales or
80 and 200 meter scales. The Freeway
Exit information is displayed on the 1/4,
1/2, and 1 mile scales. The icons are:
Honda Dealer
Hospital
Grocery Store
Acura Dealer
School
Restaurant
Gas Station
Hotel/Lodging
ATM
Parking Lot
Parking Garage Post Office
Freeway Exit Information
Some icons can be turned on or off; you can either display them or hide them from the
ICON
button on the lower left corner (see page 50) or using voice commands (see page 138).
You can select most landmark icons with the joystick to display the icon’s information. See the table on the following page for exceptions.
NOTE:
• The same list can be viewed on the screen by selecting
Map Legend
from the
Information
screen.
• When there are overlapping landmark icons, a list of the points of interest (POIs) is displayed.
• For information on the available
voice commands, see Voice
Command Index on page 138.
One-Way Traffic Icon
The one-way traffic icons (see Map
Screen Legend on page 50) are only shown on the 1/20 mile scale and only when turned on in
Icon Options
(see page 58).
56
Navigation System
Driving to Your Destination
For some icons, you can choose either to show or hide them on the map, while others like Honda Dealer are always shown. The table below shows the features for each icon type. Some Points of Interest (POIs) like Police Stations are not shown as an icon, but you can still locate the nearest one with the voice command, “Find nearest Police Station.”
POI type
Honda/Acura dealer
Hospital
School
ATM
Gas station*1
Restaurants*2
Post office
Grocery store*1
Hotel*1/Lodging
Police station
Yes
Yes
Yes
No icon
Shopping, Tourist attraction, Bank No icon
Parking garage/Parking lot Yes
Freeway exit information
One-way traffic icon
Yes
Yes
Icon can be manually displayed
Icon can be manually hidden
Yes, always No
Yes Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No icon
No icon
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Icon selection by voice
No
Yes
Yes
Yes
Yes
Yes
Icon can be selected as a destination on the
map
screen with the joystick
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes (choose POI)
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
POI can be found on the
map
screen using voice command “Find...”
Yes
Yes
Yes
Yes
Yes
Yes
*1 When gas stations, hotels, and convenience stores are selected for view on the map, some icons are shown as “brand icons.”
*2 The
Icon Options
feature found on the
Icon Bar
screen allows you to customize your choice of the displayed icons. See
Showing Icons on the Map on page 58. Also see the Voice Command Index on page 139 for the “Display,” “Hide,” and
“Find” commands.
Navigation System
57
Driving to Your Destination
Showing Icons on the Map
Touching the
ICON
button on the map screen displays the following screen:
Icon Options
This feature allows you to “fine tune” some of the icons on the
Icon bar
(see
Icon Options for more information).
Guidance Mode
When en route, this item allows you to select between a single-screen (with occasional pop-up guidance windows), or a split-screen (containing one-half map and one-half guidance/directions list window). See page 53 for an explanation of this feature, and see page 91 for Setup.
Exit Screen
Select
Return
to return to the map screen.
The screen consists of the following items:
Icon Bar (row of icon symbols)
The icon bar allows you to manually select the icons that are displayed on the map (see page 56 for a list of these icons). In the screen above, both gas stations and restaurants are selected.
Touch the icons to select (goes blue) or remove them (goes gray). You can also display or hide the same icons by using the “Display” or “Hide” voice commands (see page 139).
Icon Options
Selecting
Icon Options
displays the following screen:
This feature allows you to “fine tune” some of the icons on the Icon bar . The three icon choices – “Parking” (lot or garage), “Restaurant” (specific type or types of food), and “Other icons”
(hospitals, schools, etc.) – can each be tailored to your needs.
58
Navigation System
For instance, let’s assume that your hospital icons are not displayed on the map. You would do the following:
• First, you would ensure that the
OTHER ICON
button on the Icon bar is blue (see Icon Bar on page 58).
• Second, you select
Icon Options
and verify that hospital option is also on (blue). This procedure is explained below.
If you select
Other Icons
from the
Select category for icon settings screen, the other icons options are displayed:
In the example above,
POST OFFICE
and
SCHOOL
are selected and will show up on the map. To also see
HOSPITAL
on the map, this would need to be turned on to select it so it appears as below.
Driving to Your Destination
NOTE:
• When viewing the
map
screen, you can turn some icons on using voice control.
• See Navigation Display Commands
on page 139 for the available
“Display” and “Hide” icon command.
Exit, and save your settings by selecting
Done
.
Navigation System
59
Driving to Your Destination
Going Off the Route
If you leave the calculated route,
“Recalculating...” is displayed at the top of the screen. The system will recalculate the route from your current location and direction to the desired destination, and then give you a new route instruction. This is done automatically if you have set
Rerouting
to
Automatic
on the
Setup
screen (second) (see page 83).
If the
Rerouting
option in Setup is set to
Manual
, “Off route” appears at the top of the screen when you leave the calculated route. Say “Recalculate” or select
Recalculation
whenever you wish the system to perform a recalculation.
Off-road Tracking
If you drive more than half a mile from a mapped road, “Not on a digitized road” appears at the bottom of the screen.
The map
screen starts displaying a series of dots (breadcrumbs) to show the path you have taken if
Off-road
Tracking
on the
Setup
screen (second) is set to
On
(see page 91).
By following the dots, you can backtrack to the mapped road you originally left. “Breadcrumbs” may occasionally be displayed in urban areas, such as large parking lots in shopping malls, or in new subdivisions where the roads are not yet in the database. In other cases, you may see dots if the system temporarily goes off route, like in a parking garage where the
GPS signal is unavailable.
These dots appear only in the 1/20, 1/8,
1/4, and 1/2 mile (or 80, 200, 400, and
800 meter) map scales.
Use the
ZOOM
buttons to change scales if necessary.
Tracking continues for approximately
150 miles; dots at the beginning of the trail will start disappearing when you exceed that distance. When you reach a mapped road, the system stops displaying dots.
60
Navigation System
Viewing/Saving the Current
Location
Whenever you are on a map screen, you can always obtain your current location either by touching the Vehicle Position icon or by using the voice control system and saying “Display current location.” A screen pops up which shows the address of your current location, as well as the latitude, longitude, and elevation.
NOTE:
The elevation will not appear when the system is temporarily lacking proper
GPS information. The system elevation may not agree with elevations shown on roadside elevation signs, and may fluctuate plus or minus 100 feet or more.
You can store the current location for later use. It does not change or cancel your current route.
For example, you are following the system’s directions to get to a destination. While sitting at a stoplight you notice a store on the corner, but do not have time to visit it right now. You can save the location to select as a destination at a later date.
Driving to Your Destination
To save the location, say “Save current location” or select
Save
on the screen.
When you select “User 1” or “User 2,” the
Edit address book
screen with the current location data will appear. You can edit the name, phone number, or category name to be saved in your personal Address Book.
After the location is saved, select
Return
to return to the map
screen.
You can then use
Address Book
from the
Enter destination by
screen to select the saved location and return to the same spot.
Navigation System
61
Driving to Your Destination
Pop-Ups and Disclaimers
When you say “OK” in the Calculate
Route to screen, or if you change your route, the system checks your route and provides you with pop-up messages for the following situations:
• Your route takes you into an area that you previously set as an “Avoid
Area” (see Edit Avoid Area on page 88).
• Your route passes near an unverified area (see Unverified Area Routing on page 84).
• You are about to enter an unverified area (see Unverified Area Routing on page 84).
• Your route includes unverified areas
(see Unverified Area Routing on page 84).
• You actually entered an unverified area (see Unverified Area Routing on page 84).
62
Navigation System
Changing the Route
While en route, you may wish to alter your route, add an interim “Waypoint”
(pit stop), choose a different destination, or cancel your current destination.
To change your present route, you can do any of the following:
Say “Menu,” or press the
MENU
button to view the
Change route by
screen:
• Search waypoint (page 63)
• Delete waypoint (page 65)
• Avoid streets (page 65)
• Detour (page 65)
• Change routing method (page 65)
• Cancel the current route (page 66)
• Back to the current route (page 66)
Choose a different destination (other methods) by:
• Saying “Find nearest...” to find a POI
(page 66).
• Saying “Go home” (page 66).
• Using the joystick to select a different
POI or address on the map (page 66).
• Pressing the
MENU
button twice to get to the
Enter destination by screen (page 68).
Change Route By Screen
Pressing the
MENU
button displays the
Change route by
screen:
Driving to Your Destination
Waypoints
Waypoints allow you to add an interim
“pit stop” while traveling to a destination. For instance, you may want to stop for gas or food, and then continue on to your destination.
Although you can enter up to five waypoints at a time, typically you may never use more than one at a time.
Waypoints are routed to in the order they were entered (number 1 first, etc.), with your final destination routed to last.
If you wish to create a custom route of several destinations, and then control the order of routing, the function
“Today’s Destinations” is probably a better choice (see By Today’s
Destinations on page 41).
Navigation System
63
Driving to Your Destination
When you enter waypoints, they appear on the map screen as small red flags numbered 1-5.
Adding Waypoints
From the
Change route by
screen, if you say or select
Search Places on
Route
, then the
Select a search method screen is displayed. Select either
Places Along the Route
or
Places Around the Destination
.
Next, select your “Waypoint Category,” then follow the menu prompts to select a destination. When the system performs a search from
Places Along the
Route
, it displays matches that lie within a corridor on either side and in front of you along your route.
From
Places Around the
Destination
, the system displays matches in a spiral pattern outward from the destination. The search “corridor” distance value can be changed in
Edit
Waypoint Search Area
in Setup (see page 90).
To add another waypoint, press the
MENU
button and repeat the procedure.
If
Search Places on Route
is grayed out, the maximum of five waypoints has been entered.
NOTE:
The system does not allow you to select the roads you want to use to get to a destination. However, after you enter a destination, you can select intersections or POI waypoints that the system will use to tailor your route.
64
Navigation System
Deleting Waypoints
From the
Change route by
screen, if you say “Delete” or select
Delete
, then the
Select a waypoint to delete
screen is displayed. Say the line number of the waypoint(s) you wish to delete, or select them by using the joystick. Say or select
Done
to return to the map
screen.
Reroute: Avoid Streets
From the
Change route by
screen, if you say or select
Avoid Streets
, the system displays a list of streets that will get you to your destination. This feature allows you to avoid a street or streets along your route. This is helpful if you know of road construction, closures, or excessive traffic along the route. Simply select the street or streets you wish to avoid. You cannot avoid your current street, or the streets of your waypoint(s) or destination (system beeps if selected).
NOTE:
Although you can choose streets to avoid, you cannot choose specific streets you want to use.
Driving to Your Destination
Reroute: Detour
Calculates a detour route for you if you encounter an unexpected obstacle such as a closed road or extremely heavy traffic congestion. If a detour is selected, the system will attempt to recalculate a new route, avoiding the next 2 miles (while on a freeway) or 1/2 mile (while on a surface street).
Reroute: Change Routing
Method
From the
Change route by
screen, if you say or select
Change Routing
Method
, then the
Select routing method
screen is displayed. See
Changing the Routing Method on page 46 for details.
The route is recalculated to reflect the changes you made to the waypoint(s).
Navigation System
65
Driving to Your Destination
Cancel Current Route
Cancels the current route (and any waypoints) and returns you to the map screen.
Back to Current Route
Returns you to the original map
screen.
Changing Your Destination
There are four methods by which you can change or add a waypoint to your route. These are:
Find Nearest (Voice command)
From the map screen, say one of the
“Find Nearest...” voice commands to locate the nearest gas station, ATM, restaurant, or other point of interest. See the “Find Nearest” voice commands listing on page 140.
Go Home (Voice command)
From the map
screen, say “Go home.”
If you have entered a “Go home” address, then the system will display a confirmation screen.
Using Joystick to Change
Destination
While following a calculated route, you can select a new destination with the map
screen and the joystick.
With the map screen displayed, use the joystick to move the position icon. It will change to crosshairs. Use the joystick to position the crosshairs on your desired new destination, street, or icon, then push in on the joystick. The
Select a place screen or the address of the location will be displayed.
NOTE:
The
Select a place
screen will be displayed when the crosshairs are positioned near multiple icons or locations. The address of the location will be displayed at the top of the screen when the crosshairs are positioned on a particular street, icon, or location.
If this is not your desired new destination, press the
CANCEL
button or the
NAVI
BACK
button to return to the map screen. Reposition the crosshairs with the joystick, then push in on the joystick again to see the new address.
66
Navigation System
When the Select a place screen is displayed, select an item from the list, and the Calculate route to screen is displayed. After you select
OK
, you can select either
Set as New Destination
or
Set as Waypoint
for your specified position.
When the address of the location is displayed at the top of the screen, push in on the joystick, and the Calculate route to
screen will be displayed. After you select
OK
, you can select either
Set as New Destination
or
Set as
Waypoint
for your specified position.
Driving to Your Destination
The system will return to the map screen and recalculate the route to your new destination or waypoint.
NOTE:
When you scroll through the
map
screen while en route to a destination, some voice controls will not function.
These include:
• Display “Heading up”
• Display “North up”
Navigation System
67
Driving to Your Destination
Entering a Destination from the
Menu Screen (while en route)
If you say “Menu” or press the
MENU
button twice, the system displays the
Enter destination by
screen. Follow the procedure described in Entering a
Destination, which begins on page 22.
After selecting
OK
to the Calculate route to
screen, your new location can be used either as a waypoint or as a replacement destination.
Continue Trip Screen
If you restart the vehicle without having completed your prior trip, you will see the following screen:
• To continue to your destination or other waypoints, say or select
OK
.
• To cancel your destination, press the
CANCEL
button or the
NAVI
BACK
button on the steering wheel, or using the voice control system, say
“Cancel” or “Back.”
• If you wish to change the route method, say or select
CHANGE
METHOD
.
• For additional information on changing the routing method, see
Changing the Routing Method on page 46.
68
Navigation System
Information Screen
When you say “Information” or press the
INFO
button, the display changes to:
Cellular Phonebook
The
Cellular Phonebook
option allows you to store up to 1,000 names and 10,000 phone numbers in the phonebook of Bluetooth®
HandsFreeLink® (HFL) from your cellular phonebook. With HFL, you can then automatically dial any name or number in the phonebook.
Say or select
Cellular Phonebook
from the
Information
screen, and the display changes to:
Information Features
Voice Command Help
When you say or select
Voice
Command Help
, you will see the following screen:
NOTE:
If some items appear to be grayed out and cannot be selected, it is because you did not select
OK
on the initial
Disclaimer screen (see System Start-up
on page 16), or there is no phone paired
to the system (see Bluetooth®
HandsFreeLink® on page 18).
NOTE:
You can select an item by saying either the line number or the item name.
NOTE:
• For more information on this feature, see your vehicle Owner’s manual.
• For questions about the HFL Cellular
Phonebook, call HandsFreeLink customer support at (888) 528-7876,
or visit handsfreelink.honda.com. In
Canada, call (888) 9-HONDA-9.
Navigation System
69
Information Features
There is a tutorial available for the voice command help. Say or select
Getting started
, and the display changes to:
When you make a command help selection under any of the help screens, you will see the help commands that can be used with the voice control. You can say or select
Read List
, and the system will read the list to you.
Map Legend
You can use the Map legend screens to learn the meaning of map features, icons, colors, etc. used in this system.
When you say or select
Map Legend
, the display changes to:
Select the line number of the desired tutorial you want to view, and the tutorial will automatically be read. Press
Stop
to stop the reading, or press the
CANCEL
button.
For a listing of all voice commands, see
Voice Command Index on page 138.
Say or select the desired item or item number to view each section of the map legend.
70
Navigation System
Calendar
The
Calendar
option allows you to enter events and be reminded of them in the future. When you say or select
Calendar
, the system shows the calendar with the current calendar day highlighted.
You can scroll through the calendar day by day by moving the joystick, or select the day by voice. To change the month, say “Next” or “Previous,” use the
ZOOM
buttons, or touch the triangles at the top of the screen.
If you say or select
List
, your entries are listed. Press the
CANCEL
button to return to the Calendar screen.
Information Features
Entering Your Schedule
Set your schedule by selecting the day on the calendar, and the display changes to:
Dates with an icon indicate there is a scheduled entry for that date.
Reminder
The default for Reminder is
On
. This allows the system to remind you of the calendar item the next time you start the vehicle. See System Start-up on page 16.
Edit Date
This allows you to move your calendar entry to a different date. If you say or select
Edit Date
, the Calendar screen is displayed with existing entries grayed out. Select a new day and the display returns to the
Edit schedule
screen with a new date.
Navigation System
71
Information Features
Edit Title
Say or select
Edit Title
, then enter the name of your title using the on-screen keyboard. Once you have entered the title, say or select
Done
.
Edit Message
Say or select
Edit Message
, and the system will show the
Edit Message screen. You can enter a message on two lines. Use to change the line.
Once you have entered the message, say or select
Done
.
Message Icon
Say or select
Message Icon
, and the system displays a list of icons you can select to help identify the type of message you entered. The message icon you choose will be displayed alongside the specified date on the Calendar screen.
Delete
From the Calendar screen, select the date of the schedule you wish to remove. To remove the schedule, say or select
Delete
.
Done
Once you have finished entering the schedule, say or select
Done
. The
Calendar
screen is redisplayed and a message icon appears.
NOTE:
• You can only enter one message per day.
• A maximum of 50 entries can be stored in the schedule. After you reach 50 entries, a warning message will appear telling you that the limit has been reached. You can clear any older entries as needed.
• To reactivate a previous message, turn the Reminder setting from
Off
to
On
. If it is not turned on, the reminder will not be displayed when you start the vehicle.
• The system displays active calendar entries only after you answer
OK
on the
Disclaimer
screen.
• For more information, refer to
System Start-up on page 16.
Calculator
When you say or select
Calculator
, the display changes to:
Use the touch screen to use the following features:
Calculator
The calculator function operates like a standard handheld calculator.
Unit Conversion
Values entered on the calculator can be converted from one unit to another (e.g., inches to millimeters).
72
Navigation System
Unit Conversion
To perform a conversion:
1. Enter a numeric value to be converted
(for example, 100).
2. Select the type of unit you want to convert (for example, weight). The screen for that conversion type appears (see illustration in step 3).
3. Select the base unit (e.g., pounds) that you wish to convert to some other unit. All other units will change automatically depending on the base unit value. In the example below,
100 lbs converts to 1600 ounces, 0.05 ton (U.S.), etc.
NOTE:
• If you do not enter a value to be converted, only “Temperature” units are selectable.
• Conversions using negative value may produce meaningless or physically impossible values.
Information Features
Navigation System
73
System Setup
Setup Mode
The Setup function consists of two different screens that allow you to change and update information in the system. To display the
Setup
screens, use the voice control system and say
“Setup” or press the
SETUP
button. To change to another Setup screen, say or select
More
in the upper right corner of the screen.
On any of the
Setup
screens, you can use the voice control system to select any item on the screen.
NOTE:
• If some items appear to be grayed out and cannot be selected, it is because you did not select
OK
on the initial
Disclaimer screen. See System Startup on page 16.
• For information on the available
voice commands, see Voice
Command Index on page 138.
Setup Screen (first)
From any screen, say “Setup” or press the
SETUP
button, and the following screen appears:
Brightness
The screen brightness has 11 settings.
To change the brightness, use the voice control system and say “Brightness up” or “Brightness down.” You can also select the
Bright
. bar and move the cursor by moving the joystick left or right, or by touching the arrowheads in the bar.
Tip:
If you are having trouble viewing the screen in bright lighting conditions, try increasing the brightness.
NOTE:
You can have a separate daytime and nighttime setting for brightness. Adjust each setting when the display is in either daytime or nighttime mode.
Volume
The navigation voice volume has 10 settings, and also can be turned off. To adjust the volume, use the voice control system and say “Volume up” or
“Volume down.” You can also select the
Volume
bar and move the cursor by moving the joystick left or right, or by touching the arrowheads in the bar.
After adjusting the volume, you will hear beeps at the new volume level. You can also select volume off.
NOTE:
If you turn the volume off, you will not hear route guidance or voice command confirmations.
74
Navigation System
Display
There are two screen display modes:
Day Mode Night Mode
Day
and
Night
. The recommended setting is
Auto
, which automatically switches the screen between
Day
and
Night
modes as you turn the headlights on or off.
You can select
Day
or
Night
mode to override the
Auto
mode. This is a useful feature for drivers that like to use headlights during the day and want to temporarily override
Night
mode.
However, the screen in
Day
mode will be extremely bright at night.
System Setup
Display
Mode
Auto
(factory default)
Day
Night
Clock
How setting affects display mode:
Automatically switches between
Day
and
Night
mode by sensing if the headlights are on.
Stays in
Stays in
Day
Displays the clock on the screen.
mode.
Night
mode.
To override setting while driving:
Override night display:
Adjust dash brightness
(with headlights on) to full bright.
Override day display:
Turn on headlights and ensure the dash brightness is not at full bright.
Push and hold the joystick for 10 seconds
(switches to
Night
mode).
Push and hold the joystick for 10 seconds
(switches to
Day
mode).
But remember:
Adjust the dash brightness (with headlights on) back to normal to allow auto switching by sensing headlights.
There is no auto
Night/
Day
mode change with the headlights on/off.
You control the setting.
There is no auto
Night/
Day
mode change with the headlights on/off.
You control the setting.
To return to the previous screen, press the
NAVI
BACK
button.
Touch any button to return to your last screen.
Navigation System
75
System Setup
When you select
Clock
in Setup or the
Disclaimer screen times out, the clock screen is displayed (see page 17).
DISPLAY OFF
When you touch the
DISPLAY OFF
button, the screen is turned off. Voice guidance will continue to work in this mode. To turn on the screen, press any navigation or voice control button.
Clock Type
Allows you to choose the design of the clock
screen from one of three
Clock
Types
and one of two
Background
images.
Guidance Prompts
While you drive to your destination, the system displays and announces guidance prompts for your next maneuver. This setting allows you to adjust the number of guidance prompts before each maneuver. The settings
Min
,
Normal
, and
Max
are described below. The factory default is
Max
, so you can adequately prepare for the next maneuver. If you wish to change the number of guidance prompts, select your preferred setting, as shown in the following table.
Setting Distance before maneuver
Min
Normal
Max
(factory default)
About
1/2 mile
Yes*
About
1/4 mile
Yes
Yes
Yes*
Just before maneuver
Yes
Yes
*Uses street name in guidance phrase.
NOTE:
To temporarily turn off voice guidance prompts, select
Off
for the “Volume” setting in Setup.
Contrast
You can adjust the contrast and black level. Adjusting these settings can make the display easier to read.
NOTE:
You can have separate daytime and nighttime settings for Brightness,
Contrast, and Black Level. Adjust each setting when the display is in either daytime or nighttime mode.
Say or select
Return
to return to the previous screen.
76
Navigation System
System Setup
Setup Screen (second)
Say or select
More
to view additional
Setup functions and the following screen appears:
Personal Information
From the Setup screen (second), say or select
Personal Information
and the following screen appears:
Address Book
The Address Book allows up to a total of 200 address entries. After 200 entries, the ADD TO
Address Book
button is grayed out. The 200 addresses are shared between User 1 and User 2. For example, if User 1 has 150 addresses,
User 2 can only have 50.
You can add, modify, and delete information in the personal Address
Book list.
You may choose to use a Personal
Identification Number (PIN) to protect your privacy. However, PINs are optional, and if you decide to use one, record it in case you forget the number
(see page 81).
You can do the following functions in the address book:
• Enter an address (see page 78).
• Edit an existing address (see page 80).
• Delete an existing address (see page 80).
Navigation System
77
System Setup
Accessing the Address Book List
After selecting
Address Book
, the system prompts you to select
User 1
or
User 2
.
If an Address Book PIN has been set, the system prompts you to enter your
PIN. Verify that the correct user is displayed, then enter your PIN. After entering your PIN, say or select
Done
, and the system displays your Address
Book.
If no Address Book PIN has been set, the system displays your Address Book after selecting
User 1
or
User 2
.
NOTE:
Personal information cannot be backed up or moved to another navigation system.
Entering an Address
After you select
User 1
or
User 2
, your Address Book list appears:
Select
New Address
in the upper right corner on the screen when beginning to build your Address Book list.
Edit Name
You may use the “Name” field to give the entry a name or title that you will recognize later, such as “Doctor Smith” or “Broadway Theatre.” If you do not give the address a name, the system will assign one (Address 001, etc.).
Say or select
Edit Name
. Then use the on-screen keyboard to enter the name.
Touch
Done
when finished.
NOTE:
You can always re-enter, edit, or make changes to any entry. “Address” is the only required field.
78
Navigation System
Edit Address
When you say or select
Edit Address
, the display changes to:
Current Position - Allows you to use your current position as the address.
Address - Requires you to enter the city and address you wish to store. The operation is the same as selecting
Address
from the Enter destination by
screen (see page 23).
Places - Allows you to select one of the
Point of Interest (POI) locations already stored in the system as one of your personal addresses. This operation is the same as selecting
Places
from the
Enter destination by
screen (see page 32).
Previous Destinations - Allows you to choose one of the locations in the
Previous Destinations list for your
Address Book list. This operation is the same as selecting
Previous
Destinations
from the Enter destination by screen (see page 40).
After you have used one of these four options to enter the address, the initial screen for entering the personal address is redisplayed, with the address shown in the “Address” field. If you have entered the address using
Places
, the phone number corresponding to the address also appears in the “Phone
Number” field.
System Setup
Edit Phone Number
You can enter the telephone number of the address. If the address was chosen with
Places
, and it has a telephone number, that number is entered automatically.
Say or select
Edit Phone Number
to display the
Enter phone number screen. Enter the telephone number, including the area code, by using the voice control system (say the entire phone number one digit at a time) or by using the on-screen keyboard. Say or select
Done
when finished.
Navigation System
79
System Setup
Edit Category
If desired, you can specify the category of the address. Say or select
Edit
Category
to display the
Select a category
screen.
Scroll the screen and select a category by saying the number next to your choice, or by touching the item.
If you wish to set, add, or edit a new category, select
Edit Category
in the upper right corner on the screen. The system will show the
Select a category to edit screen. Follow the onscreen prompts to add, change, or delete a category.
If you delete a category that was used to categorize addresses, the category for those addresses becomes “UNFILED.”
NOTE:
You may have up to 100 categories.
These are shared between User 1 and
User 2.
The system will then display everything that you have entered. If all the information is correct, say or select
Done
. This will return you to the
Address Book list.
If you want to enter another address, select
New Address
in the upper right corner on the screen, then repeat the procedures above. If not, press the
CANCEL
button.
Edit/Delete an Address
This feature allows you to select an address to edit or delete. Once an address is selected, choose the appropriate function.
80
Navigation System
Home Address
This feature lets you return “Home” from any location simply by saying “Go home” at the map screen. Alternatively, you can select
Go Home
on the Enter destination by
screen (see By Go Home on page 44).
PIN Number
You can set a four-digit PIN (Personal
Identification Number) for accessing and changing personal addresses and your home address if desired. Once you set the PIN on this screen, the system asks you to enter the PIN when you access a personal address or your home address.
NOTE:
PINs are optional. If you choose to use a
PIN, make sure you remember it. If you forget your PIN, the dealer will have to reset it for you.
When you select
PIN Number
, the display changes to:
Enter the name, address, and phone number in the same way as entering a personal address, then say or select
Done
. To leave the screen, press the
CANCEL
button.
NOTE:
If your Home address cannot be found in the system, while located on the street close to your home, select “Current
Position” when entering the “Edit
Address” field.
System Setup
Address Book PIN
If you choose to enter a PIN for the personal Address Book, you will have to enter it any time you edit your Address
Book (see page 77) or select
Address
Book
on the Enter destination by screen (see page 43).
1. Select
Address Book PIN
.
2. Select either
User 1
or
User 2
. The display changes to:
3. Enter your four-digit PIN and select
Done
. If you do not wish to use a
PIN, select
Do not use PIN
.
NOTE:
The factory default is no PIN.
Navigation System
81
System Setup
4. If you have entered the PIN correctly, the display changes to the Please reenter new PIN screen. Enter the same number, then touch
Done
to validate the number you have selected.
5. If you have entered the same number both times, the display returns to the
Edit personal information
screen. If not, “incorrect PIN” appears in the upper right corner of the screen. Enter your PIN again.
NOTE:
If you wish to remove your PIN, return to the same screen and, after entering your PIN, touch the
Do not use PIN
button.
Go Home PIN
1. Select
Go Home PIN
, and the system displays the Enter your new
PIN screen.
2. Enter your PIN in the same way as entering the Address Book PIN.
NOTE:
The factory default is no PIN. If you choose to use a PIN, you will have to enter it whenever you say “Go Home” at the
map
screen or select
Go Home
on the
Enter destination by
screen.
User Name
You can change
User 1
and
User 2
to a desired name. Choose either User 1 or
User 2 on the
Select the user name to edit
screen. Enter the name, and say or select
Done
to leave the screen.
Previous Destinations
Allows you to delete some or all of your previous destinations.
1. Select this option, and the display changes to:
2. Scroll through the list and find the address you want to delete.
3. Select the address to delete by saying the line number, using the joystick, or touching it on the screen.
NOTE:
To cancel the deletion of Previous
Destinations, press the
CANCEL
button before performing step 4.
82
Navigation System
4. Say or select
Done
to perform the deletion, and the display returns to the previous screen.
Tip:
You can delete all addresses by selecting
Delete All
.
Routing & Guidance
From the Setup screen (second), say or select
Routing & Guidance
and the following screen appears:
Rerouting
If
Rerouting
is set to
Automatic
and you deviate from the route, you will see
“Recalculating ...” at the top of the screen for several seconds as the system calculates a new route. This is followed by new routing instructions.
System Setup
If
Rerouting
is set to
Manual
, you will hear a tone when the “Off route” message is displayed. Say “Recalculate” or select
Recalculation
on the screen to make the system recalculate your new route.
NOTE:
• If you live in an area with poor mapping, you may wish to set
Rerouting
to
Manual
to avoid constant recalculation. However, you will have to manually select
Recalculation
on the screen to have the system plot a new route.
• It is strongly recommended that you leave the system set to the factory default (Automatic).
Navigation System
83
System Setup
Unverified Area Routing
Allows you to receive turn-by-turn map and voice guidance in unverified areas when en route to a destination (see Map Overview on page 6). The chart below illustrates the routing differences with this setting On or Off.
Decision:
Why choose
On or Off?
What you will see…
Cautionary messages
Guidance
(map/voice)
Unverified Area Routing: Off
(factory default)
The driver wishes to navigate manually by using the navigation map and choosing the streets that lead to the destination. The driver understands that unverified roads may not be accurate, and can contain errors in location, naming, and address range.
A blue dotted vector line is displayed on the map that continually points to your destination. The driver should stop and then use the map to select streets that lead to the destination.
There are cautionary pop-up screens and voice announcements, before and during the route. These serve as reminders that you should obey all traffic restrictions.
There is no turn-by-turn map or voice guidance.
Directions list
A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.
Unverified Area Routing: On
The driver chooses to let the navigation system suggest possible routing. The driver understands that in some cases, guidance may not be appropriate. Unverified roads may not be accurate, and can contain errors in location, naming, and address range.
A blue-pink dashed route line highlights suggested unverified streets on the map while traveling to your destination. This is in sharp contrast to the normal blue route line displayed in verified areas.
There are cautionary pop-up screens and voice announcements, before and during the route. These serve as reminders that you should exercise additional caution, and obey all traffic restrictions.
Voice guidance commands end with the words “if possible.” This is to remind the driver to verify all traffic restrictions before making a maneuver.
A direction list is provided showing street names and turn symbols in pink.
84
Navigation System
System Setup
Unverified Area Routing “On”
Unverified Area Routing
When driving to your destination, you have the choice of using or not using
“unverified” roads. You make this choice in Setup screen (second). The next few pages contain an example of a route to a destination in an unverified area explaining the routing differences found in unverified areas.
With
Unverified Area Routing Off
, the system tries to use verified roads whenever possible. In this example, since only verified streets are used, it created a longer route than necessary.
With
Unverified Area Routing On
, the route is shorter, but consists of unverified (light colored) streets that may not be accurate. Because the streets are unverified, there may be errors in street location, name, or address range.
Additional caution is recommended in these areas. Always obey posted traffic restrictions.
Because both routes bypass or use unverified streets, an initial Disclaimer screen is provided. It is recommended that you stop and review the map.
Unverified Area Routing “Off”
NOTE:
Unverified roads are shown only when viewing the map in the 1/20, 1/8, and
1/4 mile map scales, or the 80, 200, and 400 meter map scales.
Navigation System
85
System Setup
With
Unverified Area Routing Off
, the moment you enter an unverified street, a caution box appears on the screen and is read by the voice. This lets you know that you are about to enter an unverified area and that you will be following a dotted “vector line” that points to your destination.
With
Unverified Area Routing On
, a caution box appears on the screen and is read by the voice. In this case, you will be presented with a dashed blue/ pink line instead of the regular blue route line. This is your signal to pay attention to posted traffic restrictions.
You cannot assume that all guidance is appropriate.
In both cases, when you actually enter the unverified street, a short caution will remind you. You will see and hear this short caution message whenever you enter unverified areas.
Unverified Area Routing “Off” Unverified Area Routing “On”
86
Navigation System
With
Unverified Area Routing Off
, you are presented with a blue “vector line” that always points to the destination. You must manually choose streets from the map that will lead to your destination. No guidance is provided, and there are no directions to the destination.
With
Unverified Area Routing On
, a blue/pink route line is shown for unverified segments. Voice guidance commands in unverified areas always end with “if possible.” This is your signal that you should use additional caution, and obey all traffic restrictions.
The maneuver window “arrow” shows any portions of unverified turns in blue/ pink dashes.
These guidance maneuvers are only a suggestion. You should always confirm that the maneuver is possible. A direction list is also provided that shows any unverified roads in a blue color, with pink arrows pointing to the next maneuver.
Unverified Area Routing “Off”
NOTE:
There is no
VOICE
button shown on the screen. With Unverified Area Routing
“Off,” no Direction List is provided.
System Setup
Unverified Area Routing “On”
Navigation System
87
System Setup
Edit Avoid Area
This function allows you to select areas you wish to avoid when calculating a route to your destination. You can select up to five areas to avoid. You may wish to set up an “avoid area” to route around long-term road construction, closures, or any area you wish to avoid. If you enter a route that takes you through or into an “avoid area,” a pop-up box will warn you that your route takes you into one of these areas. However, you can still choose destinations in an avoided area.
When you select
Edit
for the Setup item
“Edit Avoid Area,” the following list screen is displayed:
You can select
New Area
or select (by touch) one of your existing areas to modify. If you choose
New Area
, the following screen is displayed:
Either select
Address
or
Map Input
on the Enter avoid area by screen.
Each choice provides a slightly different way to locate the approximate map display for drawing the area you wish to avoid. After selecting the choice, a map screen will be displayed.
Say or select
Edit Name
and use the keyboard to enter the name on the
Enter avoid area name screen (19 characters max). Say or select
Done
to return to the previous screen. Say or select
Edit
Area
to create the area to be avoided.
The following screen appears:
Use the
ZOOM
buttons to select the map scale (available scales are 1/20,
1/8, and 1/4 mile scales). Use the joystick to move the crosshairs (red circle) to the desired start point and push in the joystick to “set” the start point.
Then move the joystick in a straight or diagonal direction to encompass the area to be avoided.
88
Navigation System
NOTE:
The maximum size of the “Avoid area” is 1/4 of the navigation display screen regardless of the map scale setting.
The selected area will be displayed as a shaded box with a yellow border. Push in on the joystick to set the end point of the avoided area. To “redraw” the area, touch
Cancel
and repeat the area selection process. If your selected area contains a freeway, the system will prompt you with a pop-up box saying
“Do you want to avoid freeways?”
Answering “No” allows you to enter a route through an avoided area on a freeway and skip the “Avoid area caution box.” See Pop-Ups and
Disclaimers on page 62.
Say or select
Done
to return to the
Edit area
screen. When you return, the
“Vicinity” field is automatically filled in by the system. Re-edit the area “Name” if desired. Select
Done
on the Edit avoid area
screen to finish editing.
Your new avoided area will now appear on the “Avoid area” list screen and be viewable on the map screen.
System Setup
NOTE:
• You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.
• If you are drawing a box around a road as an area to avoid, then ensure the following: When you draw the box, make sure that the road or portion of a road that you encircled includes an intersection. For instance, in the example below, highway 213 will be avoided, but Van
Ness will not be avoided because it lacks an intersection in the enclosed box.
Navigation System
89
System Setup
Edit Waypoint Search Area
When driving en route to your destination, you can select a temporary destination waypoint (marked with a small flag on the map) along your route for gas, a restaurant, or other POI. When you resume your trip from the waypoint, the system continues the trip to your original destination. To use this feature, see Waypoints on page 63.
This Setup item allows you to select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.
From the
Routing & Guidance
screen, select
Edit
for “Edit Waypoint Search
Area,” and then choose the desired search distance for either “On
Freeways” or “On Surface Street.”
The diagram below shows how the system handles the search for “Places
Along the Route” or “Places Around the
Destination” (see Waypoints on page 63).
For “Places along the route,” the system looks in front of you within a corridor width specified by your values for “On
Freeways” or “On Surface Street.”
The system checks the upcoming area, based on your input.
For “Places around the destination,” the system searches outwards in a spiral from the destination. In this case, specific search values are not needed; the matches are displayed in order of distance from destination.
NOTE:
These settings do not affect the search range used for the voice commands like
“Find nearest gas station” that are also available when viewing the
map
screen.
90
Navigation System
Guidance Mode
Allows you to select the guidance display mode:
Single Screen
or
Split
Screen
.
To get to Guidance Mode from the
Setup
screen, select in sequence,
“More,” “Routing & Guidance,” and
“Guidance Mode.”
Vehicle
From the Setup screen (second), say or select
Vehicle
and the following screen appears:
The factory default is
Single Screen
.
NOTE:
The Guidance Mode can also be selected on the Icon Selection screen.
See Showing Icons on the Map on
page 58.
Off-road Tracking
With this
On
, the system will provide white off-road tracking dots
(“breadcrumbs”) on the map screen whenever you drive into an area where the map does not show any roads.
See Map Screen Legend on page 19.
System Setup
After you have traveled approximately
1/2 mile away from a mapped road, the system will display a series of white dots on the map
screen to show the path you have traveled. This is provided so you can follow the dots to backtrack to the mapped road you originally left.
Tracking continues until you reach a mapped road. See Off-road Tracking on page 60.
Tracking is shown only in the 1/20, 1/8,
1/4, and 1/2 mile scales, or the 80, 200,
400, and 800 meter scales. Use the
ZOOM
buttons to change the scales if necessary.
NOTE:
To clear existing dots, turn this feature off and exit Setup. To re-enable this feature, return to Setup and turn it on again.
Navigation System
91
System Setup
Correct Vehicle Position
The system relies on satellites for positioning information. Buildings, tunnels, and other objects can block or reflect these signals, requiring the system to use “dead reckoning” to determine your location and direction.
This can sometimes lead to small errors in positioning, such as showing you on an adjacent street.
NOTE:
Using this function to adjust vehicle position is not recommended. When the system acquires a GPS signal, it will automatically place the vehicle in the correct location.
If you choose to do this, follow these steps:
1. Stop the vehicle.
2. Select
Adjust
, and the system will display a map adjustment screen.
3. Use the
ZOOM
buttons and the joystick to move the location arrowhead to the correct location.
Touch the arrow buttons on the bottom of the screen to rotate the direction arrows so the vehicle position is pointing in the correct direction.
NOTE:
If you continually have to do this, there are either problems in the database or
GPS reception problems. See
Accessories Precautions on page 5.
4. When you have finished, press the joystick or select
Done
to return to the previous screen.
5. As you drive, the current road will be displayed at the bottom of the screen.
92
Navigation System
System Information
From the Setup screen (second), say or select
System Information
and the following screen appears:
Basic Settings
From the Setup screen (second), say or select
Basic Settings
and the following screen appears:
System Setup
Voice Recognition Feedback
Allows you to turn voice control system prompts
On
or
Off
. When
Off
, you will not hear the voice control system confirmations or prompts.
This information is for dealer use only.
For ordering updates, use the version number stamped on the label (as Ver. X.
XX) of the navigation DVD. See
Obtaining a Navigation Update DVD on page 104.
When finished, say or select
Return
to return to the previous screen.
Keyboard Layout
Allows you to select the displayed keypad screen:
Alphabet
or
QWERTY
.
Units (mile or km)
Allows you to select the units for the entire system (
mile
or
km
).
Navigation System
93
System Setup
Clock Settings
From the Setup screen (second), say or select
Clock Settings
and the following screen appears:
Clock Adjustment
When you select
Clock Adjustment
, the following screen appears:
This screen allows you to set or adjust the following:
• Auto Daylight Saving Time
(Default = On)
• Auto Time Zone by GPS
(Default = On)
• DST (Daylight Saving Time)
Selection
(change DST schedule)
• Time Adjustment (adjust your clock)
•
Reset
button (resets this screen’s settings to factory defaults)
Auto Daylight Saving Time
Sets automatic daylight saving time
On
or
Off
. If set to
On
, the clock will automatically “spring ahead” or “fall back” by one hour when a daylight saving time change occurs. If you reside in a state or area where daylight saving time is not used, then you may want to turn this feature off.
NOTE:
If you set Auto Daylight Saving Time to
On
, the daylight saving time function is activated even in an area that does not use daylight saving time.
The federal government mandated that starting in 2007, daylight saving time begins in March and ends in November instead of the old schedule from April to
October. The schedule is subject to review and possible cancellation in
2008-2009.
The schedules for the time changes are stored in the software and can be selected in the
DST schedule selection
screen. Therefore, your clock will change based on the daylight saving time schedule.
NOTE:
The automatic clock setting feature relies on a satellite signal. It will not work in Hawaii and Alaska.
94
Navigation System
Auto Time Zone by GPS
Sets automatic time zone selection by
GPS to
On
or
Off
. If you are driving across the country and passing through time zones, then this feature will automatically set the time to the time zone you are traveling through.
However, if you live and work in two different time zones, you may want to turn this feature off.
NOTE:
When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.
Daylight Saving Time (DST)
Selection (Change DST Schedule)
This option lets you select the schedule
(
April-October
or
March-
November
) when daylight saving time will automatically occur in your navigation system. The system default is the
March-November
schedule as mandated by the U.S. government.
During 2008-2009, it is possible that this new change will be canceled by the government and returned back to the previous “April-October” schedule. If so, simply change the schedule in this setting back to the “April-October” schedule.
Time Adjustment
Adjusts the current time in hours and minutes. You can reset the adjustment by selecting
Reset
. Selecting
Done
returns you to the previous screen.
NOTE:
Selecting
Reset
also clears any changes you made to “Auto Daylight
Saving Time,” “Auto Time Zone by
GPS,” or “DST Selection” settings.
Depending on your location, you may need to adjust these settings.
System Setup
Clock Type
Allows you to choose the design of the clock screen. For more informaion, see
Clock Type on page 76.
Navigation System
95
System Setup
Color
From the Setup screen (second), say or select
Color
and the following screen appears:
Map Color
Allows you to choose the map color from one of four colors for the
Day
and
Night
modes.
Menu Color
Allows you to choose the menu color from one of five colors for the
Base
and
Window
.
Say or select
Return
to return to the previous screen.
NOTE:
• Choose
White
(factory default is
Beige) as the
Day
color to obtain the best daytime display contrast.
• Choose
Black
(factory default) as the
Night
color to obtain the best nighttime display contrast.
Say or select
Return
to return to the previous screen.
NOTE:
• Choose
Black
(factory default) as the
Base
color to obtain the best display contrast.
• Choose
White
(factory default) as the
Window
color to obtain the best display contrast.
96
Navigation System
System Initialization
If for any reason you lose power to the navigation system (e.g., the battery was disconnected), the navigation system will require initialization. Once completed, your system will be ready to use.
This initialization requires the following:
• Entry of the 4-digit anti-theft security code.
• GPS initialization (may not be needed depending on the length of time the system was without power).
• Map matching to align the GPS coordinates to a place on the map
(displays current street at the bottom of the map).
Entering the Security Code
If the battery goes dead or is disconnected for any reason, you will have to enter a security code for both the audio system and the navigation system before you can use it again.
When you purchased the vehicle, you should have received two cards containing the audio and navigation system’s security codes and serial numbers. Keep these cards in a safe place in case you need the codes. If you lose the cards, you must obtain the security codes from your dealer.
System Initialization
Enter the four-digit security code, then select
Done
. If you make a mistake, the system will display “incorrect PIN.” Reenter your 4-digit security code. If you have entered it correctly, the display changes to the
Disclaimer
screen. You have 10 chances to enter the correct code. If all 10 are incorrect, turn the ignition to OFF, then back to ON (II) to have 10 more chances to enter the correct code.
NOTE:
The anti-theft security code is unrelated to your optional navigation system PIN
(for Personal Address Book or Home
Address).
Navigation System
97
System Initialization
GPS Initialization
Depending on the length of time the battery was disconnected, your system may require GPS initialization. If it does, the following screen appears:
The navigation system lost power and is acquiring its location from the GPS satellites. This usually takes less than 10 minutes.
* Start the engine.
* Park the vehicle in an open area away from trees,
power lines, and tall buildings.
* Remove loose articles, cell phones, or electrical
accessories located near the GPS antenna.
*
If this screen is displayed repeatedly when starting
the vehicle, see your dealer.
If this procedure is not necessary, the system proceeds directly to the
Disclaimer
screen (see page 16).
During initialization, the system searches for all available GPS satellites and obtains their orbital information.
During this procedure, the vehicle should be out in the open with a clear view of the sky.
If the navigation system finds the satellites properly, this box clears and the Disclaimer screen is shown. If within 10 minutes the system fails to locate a sufficient number of satellites to locate your position, the following screen appears:
Something is interfering with the system’s ability to acquire its location. Check the following:
* The vehicle must be in an open area with a clear
view of the sky.
* Remove sources of GPS interference like metallic
window tint above antenna, or electrical items
near antenna (see owner's manual for details).
*
Check GPS antenna cable connection.
* Restart the engine and repeat the GPS acquire
procedure. If the problem persists, see your dealer.
If the system is still unable to acquire a signal, follow the instructions on the screen, or contact your local dealer for assistance.
NOTE:
The average acquiring time is less than
10 minutes, but it can take as long as 45 minutes.
Map Matching
This part of the initialization matches the GPS coordinates found above with a road on the map screen. To perform this part of the procedure, ensure that the navigation system is displaying a map, and drive the vehicle on a mapped road
(a road shown on the map screen). Do not enter a destination at this time.
When the name of the current road you are driving on appears at the bottom of the screen, the entire procedure is complete. Your system is now ready to use.
98
Navigation System
Although your navigation system is one of the most highly sophisticated pieces of equipment you will find in a modern automobile, you may find during its use that it has certain limitations.
The system uses GPS signals to aid in determining its current location. The
GPS is operated by the U.S.
Department of Defense. For security reasons, there are certain inaccuracies built into the GPS that the navigation system must constantly compensate for.
This can cause occasional positioning errors of up to several hundred feet.
For example, in urban areas where streets are close together, this could cause the system to show that you are traveling on a street that parallels the street you are actually on. The system will, under most circumstances, correct itself while you drive.
Depending on your current view of the sky and the position of the satellites, the elevation may be shown incorrectly.
You may also notice some delay of the vehicle position icon at intersections; this is normal.
GPS Reception Issues
The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky. The signal can easily be interrupted or interfered with by the following:
• Aftermarket metallic window tint above or to the sides of the GPS antenna (located under the dashboard)
• Cell phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard
• Radar detectors mounted on the dashboard
• Remote starters, or “hidden” vehicle tracking systems mounted near the navigation unit
System Limitations
• Other aftermarket audio electronic devices mounted near the navigation unit
• Trees, tall buildings, freeway overpasses, tunnels, or overhead electrical power wires
Although the system will direct you to your desired destination, it may not always generate what you consider to be the most direct route. Try changing the method of routing. See Changing the
Routing Method on page 46. You may also have Unverified Area Routing set to OFF. See Unverified Area Routing on page 84.
Additionally, the mapping database contains verified and unverified maps.
See Map Overview on page 6. A
Disclaimer
screen will warn you if your route includes unverified streets.
Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range.
Exercise additional caution when driving in these unverified areas.
Navigation System
99
System Limitations
The destination icon shows the approximate location of the destination.
This occurs because a city block can have as many as 100 possible addresses
(for example, the 1400 block is followed by the 1500 block). Since most cities use only a portion of the 100 possible addresses (for example, in the 1400 block, the addresses may only go up to
1425 before the 1500 block starts), the address 1425 will be shown a quarter of the way down the block by the system instead of at the end of the block where the destination is actually located.
You may find that the system occasionally reboots. This is indicated by the display returning to the globe screen. A reboot can be caused by a number of things, such as extreme temperatures or shock from bumpy roads. It does not necessarily indicate a problem that requires service. If this happens frequently, please see your dealer.
100
Navigation System
You will find that some points of interest (POI) may be missing when you search the database. This can be caused if at the time the database was gathered, the name was misspelled, the place was improperly categorized, or the POI change is not yet in the database. This means you may not find places listed that you know exist. This is also true for police agencies and hospitals. In outlying areas, facilities listed may not be the closest. Always check with local information sources if you need law enforcement or hospital services.
Every effort has been made to verify that the system’s database was accurate at the time it was created. However, businesses do close or relocate, and new businesses start in the old locations. For this reason, you may occasionally find inaccurate information when you select and drive to a point of interest (for example, a restaurant is now a jewelry store). The number of these inaccuracies increases the longer you go without an update.
The digitized map database reflects conditions as they existed at various points in time before production.
Accordingly, your DVD may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.
Due to ongoing software and database improvements, navigation disc versions may change in the middle of a production year. The version shipped with your vehicle was the most recent available at the time of production and is considered standard equipment for that vehicle. There is no free program to retrofit early production vehicles with the latest disc. For DVD ordering information, see page 104.
Database Limitations
In addition, this database does not include, analyze, process, consider, or reflect any of the following categories of information:
• Neighborhood quality or safety
• Population density
• Availability or proximity of law enforcement
• Emergency, rescue, medical, or other assistance
• Construction work, zones, or hazards
• Road and lane closures
• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)
• Road slope or grade
• Bridge height, width, weight, or other limits
• Road traffic, safety, or conditions
• Weather conditions
• Special events
• Pavement characteristics or conditions
Navigation System
101
Database Limitations
• Traffic congestion
• Travel time
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
Copyrights
• infoUSA-Data: Certain business data provided by infoUSA, Inc., Omaha,
Nebraska, Copyright © 2007, All
Rights Reserved.
• EXIT-Data: © ZENRIN CO., LTD.
2007. All Rights Reserved.
102
Navigation System
Reporting Errors
Occasionally, you may encounter database errors.
• If the error pertains to freeways and main “verified” roads shown in black on the map, then report it either online at
http://update.navteq.com/, or to
Honda Customer Service.
• If the error involves a light brown
“unverified” road, then do not report it. These areas have not been verified, and are provided for reference only
(see Map Overview on page 6).
• For errors in points of interest (POI), like a business that has changed its name, do not report them. Keep in mind that depending on when the data was collected and when your DVD was purchased, the database can be out of date. The business may have not reported the change(s), or not be in the database at all. Update
Navigation DVDs are available for purchase, usually in the fall of each year.
• If the error does not involve the database, such as vehicle position icon errors, screen error messages, or other GPS-related errors, see
Frequently Asked Questions on page 123, System Limitations on page 99, or Troubleshooting on page 133.
Customer Assistance
Honda Automobile
Customer Service
Telephone: (800) 999-1009
Fax: (310) 783-3273
Mail:
Honda Navi
America Honda Motor Co., Inc.
Honda Customer Service
MS 500-2N-7A
1919 Torrance Blvd.
Torrance, CA 90501-2746
Navigation System
103
Customer Assistance
Visiting Your Dealer
We strive to make this manual as complete as possible and to answer all questions regarding operation of the system. Occasionally, you may run into a specific issue that you cannot find in the book. You may save yourself a trip to the dealer by first consulting the following resources:
• The Troubleshooting section (see page 133).
• The Frequently Asked Questions
(FAQs) section (see page 123).
• The FAQs found on the online DVD order site (see “Obtaining a DVD”).
• For detailed questions regarding audio or other systems that interact with the navigation system, see the main vehicle Owner’s manual or the
Quick Start Guide.
• Call Honda Customer Relations (see
“Honda Automobile Customer
Service” on page 103).
• For database or POI issues, follow the guidelines in the “Reporting Errors” section (see page 103).
If your question is still unanswered and you wish to visit the dealer, please be prepared to demonstrate the issue to the service advisor. This way, the service advisor can document the issue for the factory to allow more efficient troubleshooting.
Some issues may at first seem random, but you may notice a pattern. For example, they only occur when you enter a specific address, or when driving on a certain road, or just when it is cold.
This information is very useful to the service advisor. Be patient, the service advisor may be unfamiliar with your specific issue.
Obtaining a Navigation
Update DVD
Honda is continually expanding the scope of the navigation system.
Upgraded software may be made available to navigation system owners periodically, usually in the fall of each year.
To purchase an updated DVD or a replacement DVD, call the Honda
Navigation Disc Fulfillment Center at
(888) 291-4675. You can also order online by going to www.hondanavi.com.
NOTE:
• DVDs are not available at your dealer. However, the dealer may order a DVD for you as a courtesy.
There is no program for free DVD updates.
• The DVD order line staff cannot answer technical questions regarding navigation operation, coverage, or
POIs.
• Purchasing used discs from alternate sources or online auctions may cause operational problems since they are likely to be incompatible with your current software.
104
Navigation System
Changing the DVD
NOTE:
The system’s database is stored on a removable DVD. The system will not work without the DVD. Ensure the door remains closed at all times.
1. Remove the DVD while the ignition switch is in the ACCESSORY (I) position or in the ON (II) position.
2. Push the
OPEN
button to tilt the screen down.
3. Press down on the DVD cover release tab , then lower the cover .
CLOSE button
NOTE:
Be sure to close the DVD cover completely before closing the screen.
The DVD cover may be damaged.
Customer Assistance
4. Press the MAP (Eject) button. The
DVD will automatically come out and an error message will be displayed on the screen. This is normal.
5. Pull the DVD straight out. Hold the
DVD by the edges. Fingerprints, scratches, or other contamination on the playing surface can make the
DVD unreadable.
To install the DVD, make sure the turquoise (blue/green) label is facing up.
Slide the DVD into the DVD slot. The
DVD is automatically pulled into the navigation system. Make sure you close the navigation DVD cover, then close the screen using the
CLOSE
button on the bottom of the screen.
Navigation System
105
Customer Assistance
PC Card Operation
A PC card with WMA or MP3 audio files can be played through the audio system and controlled using the navigation voice control system. PC card (PCMCIA) adaptors and various media chips can be purchased at any computer store. Tested media chips include Compact Flash and SD media, up to 2GB. Other media types and storage capacities may work, but have not been tested. Hard disc drive type media are not recommended because they can fail in a hot vehicle. See the
FAQs section for additional information.
PC card slot
Inserting the PC Card
Ensure that the PCMCIA PC card adaptor contains the media chip, and that the card adaptor is fully inserted in the slot, otherwise the display door will not close. Once the card is inserted and the door closed, there is a delay while the system reads the tag information
(the folders, song titles, etc.). Once the tag information is read, the “CARD” or
“TRACK LIST” buttons will function.
For more information on the search feature, see the audio section of the vehicle Owner’s manual.
Voice Control of PC Card
Functions
The navigation voice control system can be used to select the first 30 tracks directly by using the command, “Card play track X” (X=1-30). Additional voice commands allow the card tracks, artists, and albums to be played in a random, repeat, or scan mode. See the complete list of “Card” voice commands starting on page 142.
CD/CD-R Operation
A CD or a burned CD-R with MP3 or
WMA media files can be played by the audio system and controlled using navigation voice commands. The display door will not close with a partially inserted CD in the slot. Once the display closes, there may be a slight delay before the “CD” or “TRACK
LIST” buttons function. This is because the system has to read the tag information (artist, album, and track names) to allow searches to function.
For more information on the search feature, see the audio section of the vehicle Owner’s manual.
NOTE:
Ensure that burned CD-R discs do not have “stick-on” paper labels. The label adhesive can melt in a hot vehicle, and allow the label to curl up and jam the
CD mechanism. Use a felt-tipped marker to label your CD-R discs.
106
Navigation System
Voice Control of CD Functions
The navigation voice control system can be used to select the first 30 tracks directly by using the command, “CD play track X” (X=1-30). Additional voice commands allow CD tracks, and folders be played in a random, repeat, or scan mode. See the complete list of
“CD” voice commands starting on page 142.
Customer Assistance
Navigation System
107
Coverage Areas
Map Coverage
The system provides map coverage for the lower 48 U.S. states, Hawaii, and southern Canada. The U.S. map coverage consists of accurately mapped
(verified) metropolitan areas (in the following list) and a less accurate
(unverified) rural database. Canada coverage consists of major metropolitan areas and major roads connecting the metropolitan areas within about 100 miles north of the U.S. border. If you need additional northern Canada coverage, you may purchase the
Canadian DVD (see Obtaining a
Navigation Update DVD on page 104).
See Map Overview on page 6 for a discussion of map coverage.
The cities and metropolitan areas in the following list are fully mapped. Only major streets, roads, and freeways have been verified outside these areas. If your route passes through these areas, routing may be limited, depending on your routing choices. See Unverified Area
Routing on page 84.
If you desire additional map coverage information, contact Honda Customer
Services or go to www.hondanavi.com.
U.S. Detailed Coverage Areas
Alabama
Birmingham/Tuscaloosa
Huntsville
Mobile
Montgomery
Arizona
Phoenix Metro
Sedona
Tucson
Yuma
Arkansas
Fayetteville
Fort Smith
Hot Springs
Little Rock
California
Central Valley - including Fresno,
Merced, Modesto, and Stockton
Humboldt
Los Angeles/San Diego Metro
Mammoth Lakes
Sacramento Metro
San Francisco Bay (approximately
Monterey to Sonoma) – including
Monterey County and Hollister
Southern California Area - including
Bakersfield and San Luis Obispo
Yuba
Colorado
Denver/Boulder/Colorado Springs/
Ski Resorts Metro area – including
Ft. Collins
Grand Junction
Connecticut
Bridgeport
Danbury
Hartford Metro
New Haven Metro
Norwalk
Stamford
Delaware
Entire state – including Dover,
Wilmington Metro area, New
Castle County
108
Navigation System
Florida
Cape Canaveral/Cocoa Beach/
Titusville
Florida Keys
Fort Myers Metro area – including
Naples
Fort Pierce
Gainesville
Jacksonville Metro – including St.
Johns County
Miami/Fort Lauderdale/West Palm
Beach Metro
Orlando/Daytona Beach/Melbourne area – including Osceola County
Panama City
Pensacola
Tallahassee
Tampa Bay/St. Petersburg Metro –
including Pasco and Manatee
Counties
Vero Beach
Georgia
Athens
Atlanta Metro
Augusta/Aiken Metro
Columbus
Macon
Hawaii (all cities for the following islands)
Hawaii
Kauai
Lanai
Maui
Molokai
Oahu
Idaho
Boise
Sun Valley Ski Resorts
Illinois
Bloomington-Normal
Carbondale
Champaign
Charleston
Chicago Metro (to Wisconsin border)
– including Lake County, IN, and
Dekalb County, IL
East St. Louis Metro
Galesburg
Moline
Peoria
Quincy
Rock Island
Rockford
Springfield
Urbana-Danville
Coverage Areas
Indiana
Bloomington
Evansville
Fort Wayne
Gary/Hammond Metro
Indianapolis Metro
Kokomo Metro
Muncie
Northwest Indiana
South Bend/Elkhart/Goshen
Iowa
Cedar Rapids
Davenport
Des Moines
Iowa City
Waterloo-Cedar Falls
Kansas
Kansas City/Leavenworth Metro
Topeka
Wichita
Kentucky
Lexington
Louisville
Navigation System
109
Coverage Areas
Louisiana
Baton Rouge
New Orleans Metro
Shreveport
Maine
Bangor
Bar Harbor/Acadia National Park
Portland/Lewiston/Auburn
Maryland
State of (partial) - Baltimore/
Washington D.C. Metro – including
Charles and Carroll Counties
Cumberland
Ocean City
Massachusetts
Boston/Cape Cod Metro
Cape Cod
Springfield Metro area
Complete coverage of all cities in
Barnstable, Berkshire, Bristol,
Essex, Hampshire, Hampden,
Middlesex, Norfolk, Plymouth,
Suffolk, and Worcester Counties
Michigan
Detroit Metro area – including Ann
Arbor, Pontiac, Flint, Clinton,
Eaton, and Monroe Counties
Kalamazoo
Northern Michigan Resort Area –
including Traverse City, Elk
Rapids, Petoskey, Charlevoix,
Boyne City, and Harbor Springs
Saginaw-Midland
Southeast Michigan – including
Detroit - Grand Rapids - Lansing
Southern Michigan
Minnesota
Minneapolis/St. Paul Metro –
including cities in Anoka Scott and
Carver Counties
Moorhead
Rochester
Mississippi
Biloxi/Gulfport
Jackson
Memphis
Tupelo
Missouri
Branson
Columbia
Kansas City (KS-MO) Metro –
including Platte County
Springfield
St. Louis Metro (IL-MO) – including
additional cities in Jefferson
County
Montana
Billings
Missoula
Nebraska
Lincoln (Lancaster County)
Omaha
Nevada
Las Vegas Metro
Reno/Lake Tahoe
New Hampshire
Lebanon
Manchester
Nashua
110
Navigation System
New Jersey
Camden Metro
Newark Metro
Southern New Jersey – including
Atlantic City/Cape May/
Cumberland Metro
Trenton Metro – including Ocean and
Hunterdon Counties
New Mexico
Albuquerque
Las Cruces
Santa Fe
Taos Ski Resorts
New York
Binghamton
Buffalo – including Erie and Niagara
Counties
Eastern New York – including the
Adirondack, Oneonta -
Cooperstown, New York City
Metro, Albany, Glen Falls,
Schenectady, Troy
Ithaca
Lake Placid
Rochester – including cities in
Monroe County
Syracuse
Utica
North Carolina
Asheville
Charlotte Metro
Fayetteville
Hickory
Jacksonville
Morgantown
Raleigh-Durham Metro
Wilmington
Winston-Salem/Greensboro Metro
North Dakota
Fargo Metro
Ohio
Akron
Columbus/Marysville Metro
Cincinnati Metro – including Butler
County
Cleveland Metro – including Geauga
County
Dayton
Lima
Springfield
Toledo (Lucas County)
Youngstown
Oklahoma
Oklahoma City
Tulsa
Coverage Areas
Oregon
Bend
Eugene
Medford
Portland/Salem Metro
Pennsylvania
Allentown
Erie
Gettysburg
Harrisburg
Lancaster
Philadelphia Metro
Reading
Southeastern Pennsylvania
Southwest Pennsylvania - including
Pittsburgh and Washington County
State College/University Park
Wilkes-Barre/Scranton
Williamsport
York
Rhode Island
Newport
Providence Metro
Navigation System
111
Coverage Areas
South Carolina
Beaufort
Charleston
Columbia
Greenville/Spartanburg – including
additional cities in Greenville and
Spartanburg Counties
Myrtle Beach Metro
Rock Hill Metro
South Dakota
Sioux Falls
Tennessee
Chattanooga
Johnson City/Kingsport/Bristol
Knoxville/Farragut Metro
Memphis Metro – including Desoto
and Tunica Counties
Nashville
Texas
Amarillo
Austin Metro
Beaumont
Big Bend
Bryan/College Station
Corpus Christi
Dallas/Fort Worth Metro – including
additional cities in Grayson County
El Paso
Houston Metro – including additional
cities in Galveston County
Longview
Lubbock
Midland/Odessa Metro
Nacogdoches-Lufkin
San Antonio Metro
South Padre Island
Texarkana
Wichita Falls
Utah
Moab
Ogden
Park City
Salt Lake City Metro
St. George
Vermont
Rutland
State of (partial) - including
Burlington, Montpelier
Virginia
Washington D.C. detailed area –
including Alexandria, Arlington,
Fairfax, Falls Church, Fauquier
County, Fredericksburg City,
Manassas, and additional cities in
Loudon and Prince William
Counties
Bristol
Charlottesville
Danville
Emporia
Lynchburg
Richmond Metro
Roanoke
Shenandoah National Park
Staunton-Waynesboro-Harrisonburg
Williamsburg/Norfolk/Virginia
Beach Metro – including Charles
City, Hopewell, Kent, and Prince
George Counties
Winchester
Washington
Bellingham
Seattle/Tacoma/Olympia Metro –
including Island County
Spokane
Tri-Cities
Whatcom
Point Roberts (community)
Yakima
West Virginia
Charleston
Harper’s Ferry Metro
112
Navigation System
Wisconsin
Appleton
Beloit
Eau Claire
Green Bay
Janesville
Kenosha County
La Crosse
Madison
Lake Geneva
Milwaukee Metro – including
Milwaukee, Ozaukee, Washington, and Waukesha Counties
Neenah
Oshkosh
Racine
Sheboygan
Wausau
Wyoming
Cheyenne
Jackson Ski Resorts
Canada Detailed Coverage Areas
NOTE:
The blue city names are not included in the USA South DVD. To obtain coverage for cities listed in blue, you may purchase the Canada DVD (see page 98, Obtaining a Navigation DVD).
DVDs are not available at your dealer.
ALBERTA
Airdrie
Banff
Beaumont
Calgary
Calmar
Canmore
Chestermere
Cochrane
Crossfield
Devon
Edmonton
Fort Saskatchewan
Leduc
Lethbridge
Medicine Hat
Spruce Grove
St. Albert
Stony Plain
Strathcona County
Coverage Areas
BRITISH COLUMBIA
Greater Vancouver
Anmore
Belcarra
Bowen Island
Burnaby
Coquitlam
Delta
Langley
Langley Twp
Lions Bay
Maple Ridge
New Westminster
North Vancouver
North Vancouver District
Pitt Meadows
Port Coquitlam
Port Moody
Richmond
Surrey
Vancouver
West Vancouver
White Rock
Whatcom, WA
Point Roberts (Community) also
listed in USA Washington St Cities
Navigation System
113
Coverage Areas
Fraser Valley
Abbottsford
Chilliwack
Mission
Squamish-Lillooet
Squamish
Whistler
Thompson-Nicola
Kamloops
Central Okanagan
Kelowna
Peachland
Okanagan-Similkamen
Penticton
Summerland
Victoria
Capital
Central Saanich
Colwood
Esquimalt
Highlands
Langford
Metchosin
North Saanich
Oak Bay
Saanich
Sidney
114
Navigation System
Sooke
Victoria
View Royal
MANITOBA
East St Paul
Headingley
West St Paul
Winnipeg
NOVA SCOTIA
Halifax (partial)
ONTARIO
Brant
Brant
Brantford
Chatham-Kent
Chatham-Kent
Dufferin
Amaranth
East Garafraxa
East Luther Grand Valley
Melancthon
Mono
Mulmur
Orangeville
Shelburne
Durham
Ajax
Brock
Clarington
Oshawa
Pickering
Scugog
Uxbridge
Whitby
Elgin
Aylmer
Bayham
Central Elgin
Dutton/Dunwich
Malahide
Southwold
St. Thomas
West Elgin
Frontenac
Frontenac Islands
Kingston
Gatineau
Gatineau
Grey
Blue Mountains
Chatsworth
Georgian Bluffs
Meaford
Grey Highlands
Hanover
Owen Sound
Southgate
West Grey
Haldimand
Haldimand
Halton
Burlington
Halton Mills
Milton
Oakville
Hamilton
Hamilton
Kawartha Lakes
Kawartha Lakes
Lambton
Brooke-Alvinston
Dawn-Euphemia
Enniskillen
Lambton Shores
Oil Springs
Petrolia
Plympton-Wyoming
Point Edward
Sarnia
St Clair
Warwick
Muskoka
Bracebridge
Georgian Bay
Gravenhurst
Huntsville
Lake of Bays
Muskoka Lakes
Middlesex
Adelaide Metcalfe
London
Lucan Biddulph
Middlesex Centre
Newbury
North Middlesex
Southwest Middlesex
Strathroy-Caradoc
Thames Centre
Niagara
Fort Erie
Grimsby
Lincoln
Niagara-on-the-Lake
Niagara Falls
Coverage Areas
Pelham
Port Colborne
St Catharines
Thorold
Wainfleet
Welland
West Lincoln
Norfolk
Norfolk
Ottawa
Ottawa
Oxford
Blandford-Blenheim
East Zorra-Tavistock
Ingersoll
Norwich
South-West Oxford
Tillsonburg
Woodstock
Zorra
Peel
Brampton
Caledon
Mississauga
Navigation System
115
Coverage Areas
Perth
North Perth
Perth East
Perth South
St. Mary’s
Stratford
West Perth
Simcoe
Adjala-Tosorontio
Barrie
Bradford West Gwillimbury
Clearview
Collingwood
Essa
Innisfil
Midland
New Tecumseth
Orillia
Oro-Medonte
Penetanguishene
Ramara
Severn
Springwater
Tay
Tiny
Wasaga Beach
Toronto
Toronto
116
Navigation System
Waterloo
Cambridge
Kitchener
North Dumfries
Waterloo
Wellesley
Wilmot
Woolwich
Wellington
Centre Wellington
Erin
Guelph
Guelph/Eramosa
Mapleton
Minto
Puslinch
Wellington North
York
Aurora
East Gwillimbury
Georgina
King
Markham
Newmarket
Richmond Hill
Vaughan
Whitchurch-Stouffville
Windsor
Essex
Amherstburg
Essex
Kingsville
Lakeshore
Lasalle
Leamington
Pelee
Tecumseh
Windsor
Inter-Town (partial) Coverage
Counties/Districts/Regional
Municipalities
Brant
Bruce
Chatham-Kent
Dufferin
Elgin
Essex
Frontenac
Gray
Haldimand-Norfolk
Haliburton
Hastings
Huron
Kawartha Lakes
Lambton
Lanark
Leeds and Granville
Lennox and Addington
Middlesex
Muskoka
Northumberland
Oxford
Perth
Peterborough
Prescott and Russell
Prince Edward
Simcoe
Stormont, Dundas, and Glengarry
Waterloo
Wellington
QUÉBEC
Montreal-Laurentians
Deux-Montagnes
Deux-Montagnes
Oka
Pointe-Calumet
St-Eustache
St-Joseph-du-Lac
Ste-Marthe-sur-le-Lac
St-Placide
L’Assomption
Charlemagne
L’Assomption
L’Èpiphanie
L’Èpiphanie Paroisse
Repentigny
St-Sulpice
La Rivìere-du-Nord
Prévost
St-Colomban
St-Hippolyte
St-Jèrôme
Ste-Sophie
Coverage Areas
La Vallee-du-Richelieu
Beloeil
Caringnan
Chambly
McMasterville
Mont-St-Hilaire
Otterburn Park
St-Antoine-sur-Richelieu
St-Basile-le-Grand
St-Charles-sur-Richelieu
St-Denis-sur-Richelieu
St-Jean-Baptiste
St-Marc-sur-Richelieu
St-Mathieu-de-Beloeil
LaJemmerais
Calixa-Lavallée
Contrecoeur
St-Amable
Ste-Julie
Varennes
Verchères
Laval
Laval
Navigation System
117
Coverage Areas
Les Laurentides
Amherst
Arundel
Barkmere
Brèbeuf
Huberdeau
La Conception
La Minerve
Labelle
Lac-Supèrieur
Lantier
Mont-Tremblant
Montcalm
St-Faustin-Lac-Carrè
Ste-Agathe-des-Monts
Ste-Lucie-des-Laurentides
Val-David
Val-des-Lacs
Val-Morin
Les Moulins
Mascouche
Terrebonne
Les Pays-D’en-Haut
Lac-des-Seize-Îles
Morin-Heights
Piedmont
Ste-Adolphe-d’Howard
St-Sauveur
Ste-Adèle
Ste-Anne-des-Lacs
Ste-Marguerite-Estèrel
Wentworth-Nord
Longueuil
Boucherville
Brossard
Longueuil
St-Bruno-de-Montarville
St-Lambert
Mirabel
Mirabel
Montreal
Baie-D’Urfé
Beaconsfield
Côte-St-Luc
Dollard-des-Ormeaux
Dorval
Hampstead
Kirkland
L’Ïle -Dorval
Montréal
Montréal-Est
118
Navigation System
Montréal-Ouest
Mont-Royal
Pointe-Claire
Senneville
Ste-Anne-de-Bellevue
Westmount
Roussillon
Candiac
Chateauguay
Delson
La Prairie
Lery
Mercier
Ste-Catherine
St-Constant
St-Isidore
St-Mathieu
St-Philippe
Therese-de-Blainville
Blainville
Boisbriand
Bois-des-Filion
Lorraine
Rosemere
Ste-Therese
Vaudreuil-Soulanges
Coteau-du-Lac
Hudson
Les Cèdres
Les Coteaux
L’Ile-Cadieux
L’Ile-Perrot
Notre-Dame-de-l’Ile-Perrot
Pincourt
Pointe-des-Cascades
Pointe-Fortune
Rigaud
Riviere-Beaudette
St-Clet
Ste-Justine-de-Newton
St-Lazare
Ste-Marthe
St-Polycarpe
St-Telesphore
St-Zotique
Terrasse-Vaudreuil
Vaudreuil-Dorion
Vaudreuil-sur-le-Lac
Quebec
La Cote-de-Beaupré
Beaupré
Boischatel
Château-Richer
L’Ange-Gardien
St-Ferréol-les-Neiges
St-Joachim
St-Louis-de-Gonzague-du-Cap-
Tourmente
Ste-Anne-de-Beaupré
La Jacques-Cartier
Fossambault-sur-le-Lac
Lac-Beauport
Lac-Delage
Lac-St-Joseph
Ste-Brigitte-de-Laval
Ste-Catherine-de-la-Jacques-Cartier
Shannon
L’Île-d’Orléans
St-François- L’Île-d’Orléans
St-Jean
St-Laurent-de- L’Île-d’Orléans
St-Pierre-de- L’Île-d’Orléans
Ste-Famille
Ste-Pétronille
Coverage Areas
Lévis
Lévis
Québec
L’Ancienne-Lorette
Notre-Dame-des-Anges
Québec
St-Augustin-de-Desmaures
Navigation System
119
Coverage Areas
CANADA CONNECTOR ROADS
The Cross-Canada Connector Road allows for travel between the provinces of British Columbia and Quebec in
DCA 11. Major metropolitan city POIs are also included.
Road Inclusion
Roads in the province of British
Columbia
Hwy-1/Trans Canada Hwy from
Alberta/BC boundary to Vancouver detailed city
Hwy-3/Crowsnest Hwy from Hwy-1/
Trans Canada Hwy (Hope) to Hwy-
5/Coquihalla Hwy (Hope)
Hwy-5/Coquihalla Hwy (in Hope) to
Hwy-1/Trans Canada Hwy (in
Kamloops)
Hwy-99 between Vancouver and
Whistler
Roads in the province of Alberta
Hwy-1/Trans Canada Hwy across whole province
Hwy-1A from Cochrane to Canmore
Hwy-1X from Hwy-1A to Hwy-1/
Trans Canada Hwy
Morley Road from Hwy-1/Trans
Canada Hwy
Hwy-3/Crowsnest Hwy (at Medicine
Hat) to Lethbridge
Hwy-4 (at Lethbridge) to 1-15 (U.S. border)
Hwy-36 between Hwy-3 (in Taber) and Hwy-4 (in Warner)
Hwy-3/Crowsnest Hwy (in
Lethbridge) to Hwy-2 (in Fort
Macleod)
Hwy-2 (in Fort Macleod) to Hwy-1/
Trans Canada Hwy (in Calgary)
Roads in the province of Saskatchewan
Hwy-1/Trans Canada Hwy across whole province
Roads in the province of Manitoba
Hwy-1/Trans Canada Hwy across whole province
Hwy-100/Trans Canada Hwy in
Winnipeg (partial beltway)
Hwy-75 from Hwy-100/Trans
Canada Hwy (Winnipeg) south to link with 1-29 (U.S. border)
Roads in the province of Ontario
Hwy-69/Trans Canada Hwy from
Muskoka district to Sudbury
Hwy-17/Trans Canada Hwy from
Ottawa Detailed Area Coverage to
Manitoba border
Hwy-17B at Sault Ste Marie to link with 1-75 (U.S. border)
Hwy-61 from Hwy-17 at Thunder
Bay to link with US-61 (U.S. border)
Hwy-11 from Muskoka district to
North Bay
Hwy-60 and Hwy-127 in Nipissing
County
120
Navigation System
Operation in Alaska and
Hawaii
Certain functions that rely on a satellite signal will not work in Alaska and
Hawaii. These functions include but are not limited to XM radio, automatic clock updates, and time zone adjustments.
Alaska
If the vehicle was purchased in the lower 48 states and driven to Alaska, the system cannot display maps. The message “Vehicle is out of the database...” will be displayed.
Hawaii
This section describes the differences in navigation system operation for vehicles delivered in Hawaii.
XM Radio
Navigation-equipped vehicles delivered to Hawaii are equipped with XM hardware, but XM broadcasting is not available; therefore sections of the manual that mention XM audio do not apply. Vehicles originally delivered to the U.S. mainland and shipped to Hawaii also have XM, but will not function because the XM satellites (aimed toward the U.S. mainland) are too far away to obtain reception.
Map Coverage
All roads displayed on the Hawaii map screens are detailed coverage roads.
Text related to “unverified” roads or areas are not applicable. The following topics do not apply in Hawaii:
• Unverified road descriptions (see page 6 and 84).
• Cautions and pop-up windows related to unverified roads (see page 62).
Coverage Areas
• Setup entries that relate to turning on or off unverified routing (see page 85).
• When zooming in and out, there is no
350-mile scale for Hawaii.
Other Map Issues
• See the coverage section for a list of islands with coverage (see page 108).
• Freeway Exit information does not exist in Hawaii, so the “Freeway Exit
Info” icon is not shown on the icon bar.
Navigation System
121
Coverage Areas
Address and POI Entry Screens
When in Hawaii, the following differences occur for map, address, and
POI selection:
• It is not possible to enter U.S. mainland addresses or scroll the map east to the U.S. mainland.
• Selection of the “State” is confined to the state of Hawaii only.
• Entry of a destination address or POI on an island other than your current island may result in a screen caution message. This is normal because there are no “ferry” routes between islands available in the database.
• If the “Guidance Prompts” setting on the Setup screen is set to normal or maximum, street names will not be spoken in voice guidance commands.
Setup Screen Differences
The
Setup
screen differences are minor and are listed below. See the Setup section (page 74) for additional information.
Routing and Guidance (Unverified
Area Routing On/Off)
This feature is unavailable. All roads displayed on the map are verified.
Clock Adjust Screen
There is no daylight saving time for
Hawaii.
Auto Daylight Saving
Time
,
Auto Time Zone by GPS
, and
DST Selection
will not be shown on the
Clock adjustment
screen. To test your adjustment, use the voice control system, and say “What time is it?” (see page 94).
Bluetooth® HandsFreeLink®
Operation
When pairing a cell phone to use the
Bluetooth® HandsFreeLink® feature, you may see a “Phone-Data
Connection” screen. If so, do not complete this portion of the process.
Shipping a Vehicle To or From
Hawaii
Although the DVD in the vehicle contains maps for both U.S. mainland and Hawaii, the dealer must perform the selection of “U.S. mainland” or
“Hawaii” for you. When the dealer makes the switch from U.S. mainland to
Hawaii or vice versa, the system clears all user data. Make sure to record any personal information that you do not want to lose.
NOTE:
Shipping a vehicle from Hawaii to the
U.S. mainland
• If you wish to receive XM audio, you must call XM and set up an account at (800) 852-9696.
Shipping a vehicle from the U.S. mainland to Hawaii
• If a U.S. mainland-delivered vehicle is shipped to Hawaii, there is no XM reception. See your Hawaii dealer to allow viewing of local Hawaii maps.
• The issues under “Operation in
Hawaii” above apply.
122
Navigation System
Frequently Asked Questions
Map and Features, Voice Operation, Entering Addresses
Problem
Why does the Disclaimer screen need to be displayed every time I start the car? I am the only driver.
The Setup or Information screen has “grayed out” items that
I cannot select. Why?
I tried entering an address, but the city or street could not be found. Is there any other way to route to the location?
When I enter an address, some letters become grayed out. Is this normal?
How do I delete Personal Addresses, Previous Destinations, or the Home Address?
I cannot hear the navigation system voice.
The voice control system is having difficulty recognizing my voice commands.
When the system pronounces the street name in the guidance command or reads the destination address, it sounds strange.
What causes this?
Solution
The Disclaimer screen reminds you and your guest drivers to always operate the navigation system in a safe manner.
You need to select
OK
on the Disclaimer screen to view these items. See
System Function Diagram on page 21.
Some cities are lumped in with a major metro area. Try entering the street first. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered. Try selecting the destination directly from the map. See By Map Input on page 36.
Yes. As you enter each letter in an address or a point of interest (POI), the system looks in the database to see what letters are possible and “grays out” letters that do not apply.
This is done in the
Setup
screen (second) under “Personal Information.”
See page 77.
1) Ensure that
Volume
in the
Setup
screen (first) is not
Off
. See page 74.
2) Go to “Basic Settings” in the Setup screen (second), and set
Voice
Recognition Feedback
to
On
. See page 93.
Ensure that the vents are not blowing on the microphone on the ceiling, the vehicle is as quiet as possible, and you are using the correct command when speaking (see Improving Voice Recognition on page 13). Say “Help” at any screen to see a list of the applicable voice commands. If the system cannot recognize your command because of background noise, speak louder.
The basic guidance phrase uses a studio-recorded voice, but the street name is pronounced by the system using a machine-generated voice.
Consequently, the name may be mispronounced or sound strange at times.
Navigation System
123
Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch to the night display mode. Why?
The daytime map screen is dark like the night display mode, and it is hard to see. Why?
During the day, I turned on the lights because it started to rain, but the screen went dark. How can I make it still display day mode?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
Solution
The system thinks it is in
Day
display mode. Verify the following: The display mode in Setup is set to
Auto
, the dash brightness is not set to maximum (must adjust with headlights on), and
Map Color
in Setup is set to
Black
for Night. See Display on page 75.
Verify the following: The display mode in Setup is set to
Auto
, and
Map
Color
in Setup is set to
White
for Day. See Display on page 75.
Adjust the dash brightness (+) button (with headlights on) to full brightness.
Remember to set it back to a medium setting, or at night, the screen will be bright. See Display on page 75.
The navigation system was not designed for this. However, you can view the coordinates of an address by touching the vehicle position icon on the map. See Map Screen Legend on page 50.
Go to “Personal Information” in the Setup screen (second), and select
PIN
Number
. Select
User 1
or
User 2
and enter your existing PIN, and then you have the choice to change or remove the PIN. See page 81.
PINs are optional. See information regarding PINs on page 81. Your dealer can reset the PIN for you.
124
Navigation System
Frequently Asked Questions
Guidance, Routing
Problem
The navigation does not route me the same way I would go, or the way some other mapping program displays. Why is this?
Solution
The navigation system attempts to generate the optimum route. See
Changing the Routing Method on page 46.
Why is the street I’m on not shown on the map? It has been here for more than a year.
The vehicle position icon is not following the road, and the
“GPS icon” text in the upper left hand corner of the screen is white or missing.
The mapping database is constantly undergoing revision. See page 104 for ways to obtain the latest detailed coverage information.
• The GPS antenna (located under the center of the dashboard) may be blocked by personal items. For best reception, remove items from the dashboard, such as radar detectors, cell phones, or loose articles.
• Metallic tinting or other aftermarket devices can interfere with the GPS reception. Please see your dealer. Also see System Limitations on page 99.
I entered a destination, but the blue highlighted route and voice guidance stopped, or turned into a blue/pink dashed line before I got to my destination. Why is this?
The map rotates while I make turns. How can I stop this?
Your route has entered an unverified area. See Unverified Area Routing on page 84.
Sometimes, I cannot select between the North-up and
Heading-up map orientations. Why is this?
While driving to my destination, the “time to go” display sometimes increases, even though I am getting closer.
Select the North-up map orientation by voice, or by touching the map orientation icon on the map
screen. See Map Orientation on page 55.
The Heading-up map orientation can only be shown in the lower scales
(1/20 - 1 mile scales). See Map Scale on page 54.
The “Time to go” is based on actual road speeds. However if your speed slows down when you encounter slower traffic, the system updates the
“Time to go” based on your actual speed to give you a better estimate of arrival time.
The vehicle position icon on the map “lags” a short distance behind, especially when I arrive at an intersection. Is there anything wrong?
No. When at an intersection, the system is unaware of the width of the intersecting road. Large differences in vehicle position can indicate a temporary loss of the GPS signal. See GPS Reception Issues on page 99.
Navigation System
125
Frequently Asked Questions
While I drive, my screen shows white dots (“breadcrumbs”) on it. What do they mean?
Problem
How can I get rid of the white dots (“breadcrumbs”) from my screen?
A road that I selected to avoid is being used when routing.
What is wrong?
When I arrive at my destination, the bull’s-eye is shown at a different location on the street. Why?
Solution
These are called “breadcrumbs.” If you drive more than 1/2 mile from mapped roads, the off-road tracking feature begins to function. See Off-road
Tracking on pages 60 and 91.
Go to “Vehicle” in the to
Off
Setup
screen (second), and set
, then return to the map. See page 91.
that include at least one intersection. See page 88.
Off-road Tracking
When you “draw” your area to avoid, make sure to select sections of roads
My elevation (shown when I touch the vehicle position icon) seems to fluctuate even though my elevation has not changed.
My elevation is missing on the “current position” screen.
Why?
The system calculates the bull’s-eye location based on the street address range allocated for that street. See Destination Icon on page 56 for an example.
This is normal and due to errors in satellite position. The elevation can vary
+/- 100 feet. See System Limitations on page 99.
If the GPS antenna cannot receive at least four satellites, the elevation is not displayed. Try moving the vehicle into an open area. If the elevation is zero or below sea level, the elevation is also not displayed.
126
Navigation System
Frequently Asked Questions
Ordering a Navigation DVD, Coverage, Map Errors, Limitations
detailed coverage area?
Problem
I want to buy a new DVD. How do I purchase one?
I want to order a DVD. How can I determine the DVD version in my navigation system?
I got a navigation DVD from a friend or an online source, but it does not work. Why?
When is my city going to become part of a fully verified
Will the navigation system work outside North America?
I moved my vehicle from the U.S. mainland to Hawaii (or from Hawaii to the U.S. mainland). Why does my navigation system not show the correct map?
Can I play video DVDs in my navigation system?
Solution
You cannot obtain a new DVD from the dealer. See Obtaining a Navigation
Update DVD on page 104.
The version is on the label of your DVD. It starts with “Ver:.” See Changing
the DVD on page 105.
Your vehicle was designed to use a turquoise (blue/green) DVD. DVDs with differently colored labels or from different manufacturers will not operate correctly. Always obtain DVDs from the DVD order desk. See page 104.
The mapping database vendor is constantly revising map coverage. See page 104 for ways to obtain the latest detailed coverage information.
The navigation system contains maps only for the lower 48 U.S. states,
Hawaii, and portions of southern Canada. The system will not work in
Mexico, Alaska, or overseas. Canada coverage is limited. See Map
Coverage on page 108.
The coverage area (Hawaii or U.S. mainland) must be selected by your dealer.
I found some errors in the database. How do I report them?
No. The navigation system is designed only to read the turquoise (blue/ green) DVD provided with your vehicle. Map discs for other vehicle manufacturers or PC map programs will not work.
Minor errors are bound to occur in a large database. If you encounter major errors, you can report them following the instructions on page 103.
Navigation System
127
Frequently Asked Questions
Display, PC Card, Accessories
Problem
The display appears dim when starting the car in really cold weather. Is there a problem?
The screen does not close completely. Why is this?
Solution
No. This is normal, and it will become brighter after a few minutes.
Where can I get PC card adaptors or the media chips that go into them?
How do I put music files onto the PC Card ?
• Ensure that it is not during inserting/ejecting a CD. The screen cannot be closed if a CD is not completely inserted in the unit.
• Ensure that it is not during inserting/ejecting the DVD. The screen cannot be closed if the DVD is not completely inserted in the unit.
• Ensure that a PC card is inserted completely. The screen cannot be closed if a PC card is not completely inserted in the unit. Moreover, the recognition of a PC card takes about 1-2 seconds after it is inserted. The screen cannot be closed during this recognition.
• Ensure that the media clip is inserted into the PC card adaptor. Eject the
PC card adaptor when not in use.
• Any computer store sells PCMCIA PC card adaptors, and various types and capacities of media chips for them. Ask for Compact Flash or SD media and adaptors.
• Hard Disk Drive type media are not recommended because they can fail in a hot car.
You can use your home PC to move MP3 or WMA music files to your PC card. Most laptops have a slot to plug in your PC card. For desktop PCs,
USB adaptors are available that can accept your PC card or media chip.
Move files to the card like to any other hard drive.
128
Navigation System
Frequently Asked Questions
Problem
I insert a PC card with music files, but the CARD button or navigation “PC Card” voice commands do not work. What’s wrong?
Some of the files on the PC card will not play, or I have an eight GB card with 2500 songs, but only 999 play. Why is this?
When I eject the media chip but leave the empty adaptor in the PC card slot, the display door will not close. Why is this?
The media card will not fully insert into the PC card slot.
What is wrong?
Solution
• After inserting the card, a delay of up to 30 seconds may be required to read the tag information (album, artist, and track names) - this is normal.
• Ensure that the music files on the media chip are either WMA or MP3 music format. Other formats are not recognized.
• Some downloaded WMA and MP3 files are copy protected, and require that the copyright authentication files accompany the MP3/WMA files on the Card.
• Media types and capacities continue to grow. As a rule, stick to Compact
Flash or SD media with capacities of 2GB or less. Other types of media or larger capacities may work, but have not been tested.
• Single-type media PC Card adaptors are recommended over multimediatype adaptors.
• Ensure that there are files on the card. For SD and other media with a write-lock switch, ensure that the write protect is off when adding files to the card.
• The system only recognizes FAT and FAT-32 file format for the media.
• The quantity of tracks is limited to 999 tracks and a file structure of up to eight folder levels deep. Tracks beyond 999 are simply not recognized.
• Ensure that the music files on the media chip are either WMA or MP3 music format. Other formats are not recognized.
To prevent damage to the display mechanism or your PC card/media chip, the system checks for a partially inserted PC card and a partially inserted media chip. Always remove the PC card and media chip when not in use.
• The PC card edge connector or the pins in the back of PC card slot may be damaged.
• Never force the card into the slot - the adaptor card should glide smoothly into the slot. See your dealer if the problem persists.
Navigation System
129
Frequently Asked Questions
Problem
I insert a CD-R with music files, but the CD button or “CD” voice commands do not work. What is wrong?
Solution
• After inserting a CD-R with WMA or MP3 files, a slight delay may occur before the CD button operates. The system needs to read the tag information (album, artist, and track names) to allow searches - this is normal.
• Ensure that the music files on the CD-R are WMA or MP3 format. Other formats are not recognized.
• Some WMA and MP3 files are copy protected, and require that the copyright authentication files accompany the MP3/WMA files on the CD.
Note:
Never use CD-R discs with stick-on labels. The labels can curl and jam the CD mechanism, requiring replacement of the navigation unit and subsequent loss of all personal information.
130
Navigation System
Frequently Asked Questions
Miscellaneous Other Questions
My clock frequently changes forward and backward by one hour. Why is this?
Problem Solution
The clock is being automatically set based on your GPS location. If you live and work on the boundary between two time zones, you can turn off this feature. See page 95.
When driving near a time zone border, the time changes even though I am not near the time zone. Why is this?
The time zone borders are only approximated in the system. Depending on the geography of the time zone boundary, the switch to a different zone can be erratic. See page 95.
You can turn off this feature. See page 94.
My state does not observe daylight saving time. How do I turn off this feature?
Daylight saving time occurred, but the navigation system did not change time even though Setup shows
Auto Daylight
Saving Time
is
On
.
The navigation system automatic daylight time feature is not switching the navigation system clock on the correct dates.
Why is this?
Go to the
Clock adjustment
Clock Settings on page 94.
screen in Setup and select
DST Selection
.
Ensure that the correct DST schedule is selected. For more information, see
1) Go to the Clock adjustment screen in Setup and ensure that
Auto
Daylight Saving Time
is
On
.
2) The navigation system is designed to switch to daylight saving time according to the months selected in the DST schedule selection screen.
Ensure that the appropriate schedule is selected. For more information, see Clock Settings on page 94.
The navigation system clock switched by one hour for no apparent reason. What can cause this?
1) You may be driving near a time zone boundary (see Auto Time Zone by
GPS on page 95).
2) The navigation system does not switch between standard and daylight saving time. Set
Auto Daylight Saving Time
to
On
on the
Clock adjustment screen in Setup, and ensure that the correct month switching schedule is chosen on the DST schedule selection screen. See page 94 for more information.
Navigation System
131
Frequently Asked Questions
Problem
My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find this code?
I speak a language other than English. When will other languages be available for the navigation system?
Solution
There should be a card in the glove box with the anti-theft code for the navigation/audio system. This card contains the 4-digit security code and serial number. If you cannot find it, your dealer can help you out.
This is being considered as a future enhancement.
132
Navigation System
Troubleshooting
Screen Error Message Solution
Navigation system is unable to acquire a proper GPS signal.
Make sure there is nothing on the dashboard blocking the GPS antenna
(aftermarket metallic window tinting or aftermarket devices placed on the dashboard, like radar detectors, cell phones, or loose items). If the dashboard is clear of objects, move the vehicle to an open space away from tall buildings, trees, etc.
Navigation unit door is open or No DVD disc is inserted.
Please check system.
No DVD disc. Please check system.
DVD disc reading error (unformatted). Please consult your dealer.
Display temp is too high. System will shut down until display cools down.
Outside temperature is low. System will take a while to start up.
Navigation system voice recognition cannot be activated when another unit is using the audio system.
Make sure that the navigation DVD disc is inserted with the label side up and the navigation unit door is fully snapped closed (see page 105).
Check that the navigation DVD disc is inserted with the label side up (see page 105). If the problem persists, see your dealer.
Check the DVD disc surface for deep scratches or other damage. Make sure you are using a navigation DVD (turquoise-colored [blue/green] label). The system cannot read other mapping databases or video DVDs. If the problem persists, see your dealer.
This message will appear briefly when the display temperature is too high, and then the display will turn off until the temperature cools down. The system will turn back on when the display cools down.
The temperature is below -22°F and the navigation system has difficulty reading the DVD. The system will start up when the temperature warms up.
Route has not been completed. Please try again from a different location.
HandsFreeLink (HFL) can override the navigation system. Make sure the
HFL TALK
button is not on when you press the
NAVI TALK
button, or the message will appear. Simply press the
HFL BACK
button to resume control of the navigation voice buttons.
This message will appear when you are routing to or from a place (new area) that is not in the database. Try planning a different route to or from a different location.*
Navigation System
133
Troubleshooting
Screen Error Message
No alternate route found. Original route will be followed.
This destination cannot be found in database.
Vehicle is out of the database coverage area.
Solution
No alternative route method was found. The original route method will be used.*
Ensure that a road name is displayed at the bottom of the map.
The destination was not found in the database. Try another destination nearby, or select the destination with the joystick.*
The vehicle is located outside of the mapped area provided by your navigation DVD. See page 108 for map coverage.
* If the error persists or is shown for a wide area, see your dealer.
134
Navigation System
Glossary
The following is a glossary of terms pertaining to the voice recognition navigation system.
Avoid Area - Areas you wish to avoid can be entered into the system, and will be avoided while routing.
Breadcrumbs - Off-road tracking dots that can be followed on the map to retrace your route back to a mapped
(digitized) road. This function can be turned on/off in Setup screen
(second).
Compact Flash - A media chip that can be used with a PC card adaptor to play audio music files.
Database - This consists of the map data, and the POI (Points of Interest) data stored on the DVD.
DCA - Detailed Coverage Area. The main metropolitan areas in the lower
48 U.S. states, Hawaii, and southern
Canada are mapped to this level. See page 108 for a list of these areas.
Digital Audio Card Reader - The PC card slot accepts a PCMCIA adaptor with a flash memory chip (see page 106).
Digitized Road - A road that appears on the navigation screen. The road name will appear at the bottom of the navigation screen. If the user drives
“off road,” the navigation system will display “breadcrumbs,” depending on how far you drive from a mapped road.
Disclaimer Screen - Screen containing cautionary information. It is meant to be read carefully and acknowledged by the customer when using the navigation system.
DVD or DVD-ROM - Digital Versatile
Disc. The navigation program and database resides on this disc. For information on how to order a replacement or update DVD, see page 104.
FAQ - Frequently Asked Questions. See page 123 for a list of customer FAQs and troubleshooting information.
Glossary
GPS - Global Positioning System. A network of 24 satellites in orbit around the earth. The navigation system can simultaneously receive signals from up to 12 satellites to accurately position the vehicle on the map.
GPS Antenna - Located under the dashboard. Electronic items operating in this general location can interfere with the GPS signal.
HFL - Bluetooth® HandsFreeLink®.
Your vehicle is equipped with this feature, which uses Bluetooth technology as a wireless link between the vehicle and your Bluetoothcompatible cell phone.
Icon - Symbol representing Points of
Interest (POI) that can be displayed on the map.
Initialization - This refers to the period needed to reacquire the GPS satellite orbital information whenever the navigation system power has been disconnected. This can take 10 to 45 minutes with the vehicle out in an open area.
Navigation System
135
Glossary
LCD - Liquid Crystal Display. The navigation screen.
Map Matching - The received GPS information allows the navigation system to position the vehicle on the map. Map matching has occurred if the map screen is displaying the current street name in the bottomshaded area.
Mic - Abbreviation for the microphone used for receiving voice commands.
It is located near the map light in the ceiling.
MP3 - A music file format that can be played from a CD-R, USB thumb drive, or PC card.
MW - Maneuver Window. While en route to a destination, this window displays information about the next maneuver.
Navi - Abbreviation for the navigation system.
North Pointer - The map symbol showing the map orientation. See page 55.
Off Route - This occurs when the user leaves mapped roads. Off-road tracking dots (“breadcrumbs”) are displayed if the option is enabled in the
Setup
screen. The user can use them to return to a mapped road. The bottom of the navigation screen will say, “Not on a digitized road.”
Outlying Areas - These are rural areas that typically have only their main roads mapped. All other roads are shown in light brown for reference only, since they have not been verified.
PC Card - An adaptor card (sometimes called a PCMCIA card) that can contain a compact flash, or SD media clip with MP3 or WMA music files.
PIN - Personal Identification Number.
A 4-digit number created by the customer to protect personal information.
POI - Point of Interest. These are the businesses, schools, etc. found under the
Places
option on the
Enter destination by
screen. See page 32.
Polygon - Colored areas on the map screen denoting parks, schools, etc.
See Map Screen Legend “Map
Features” for a list of the assigned colors. See page 50.
QWERTY - Keyboard layout resembling the typewriter keys. The keyboard layout can be changed to an alphabetical layout in the Setup,
Basic Settings
screen.
Reminder - Automatic “pop-up”
Calendar message. See Calendar on page 71.
Secure Digital (SD) Media - These can be installed into a PCMCIA adaptor to play MP3 or WMA music files.
Security Code - Code needed to activate the navigation system or audio unit. See Entering the Security
Code on page 97.
Touch Sensor - The touch sensor on the front of the LCD consists of a touch sensitive resistive membrane with an infinite number of possible touch locations. The sensing locations are confined to a grid of 20 vertical and
10 horizontal touch locations.
136
Navigation System
Unverified Streets - These streets have not been verified for turn restrictions, one-way, etc. They are shown in light brown on the map. Unverified streets may be missing from the map, shown in the wrong location, or have an incorrect name or address range.
USB - Universal Serial Bus. A computer hardware interface used to store and play audio files (MP3, WMA, AAC) from USB devices, such as thumb drives or iPods. See the Audio section in your vehicle Owner’s Manual for more information.
Vehicle Speed Sensor - Provides speed signal to the navigation system for moving the VP icon on the map.
Verified Streets - These streets consist of the detailed metropolitan coverage areas and all other inter-town connection roads. These roads are shown in black on the map.
Voice Control - See VR.
VP - Vehicle Position. When in map mode, this circular icon shows the vehicle position on the map. Touch this icon to show the latitude, longitude, and elevation of your current position.
VR - Voice Recognition. This allows voice control of many of the navigation functions. The hardware consists of the microphone, voice control switch (
NAVI TALK/NAVI
BACK
buttons), and the front speakers.
Waypoint - A temporary destination you may enter while en route (e.g., a gas station, ATM, etc.). See page 63.
WMA - A Windows media audio file that can be played from a CD-R, USB thumb drive, or PC card.
Yaw Rate Sensor - Senses when the vehicle makes a turn, which makes the VP change direction on the map as you turn.
Glossary
Navigation System
137
Voice Command Index
Global Commands
The system accepts these commands on any screen.
Help (reads list of the commands for the displayed screen)
Setup (displays Setup screen (first))
Display map (displays the map screen)
Display menu (displays the Enter destination by
screen)
Display audio screen
Information (displays the
Information
screen)
Back (to previous screen, same as
CANCEL
or
NAVI BACK
button)
Cancel (cancels current activity)
What time is it?
The “Voice Command Help” option on the
Information
screen lists many of the following controls. To avoid distraction while you are driving, the system can read the commands for you.
The commands are accessible at any time while driving and can be read to you so that you do not need to memorize all of them.
Navigation General
Commands
The system accepts these commands on a map/guidance screen.
Display menu (if en route, displays the Change route by screen)
Display navigation (if en route, displays the
Change route by screen)
Display map
Display map guide (same function as the
MAP/GUIDE
button)
Display setup (or just Setup)
Display information (or just
Information)
Display audio screen
Cancel
Backward (or just Back)
What time is it?
Repeat voice (repeats the screen prompt for most screens)
Help (displays the voice command allowed for the screen you are viewing)
Voice command help
How long to the destination? (when en route, tells the time to destination)*
How far to the destination? (when en route, tells the distance to destination)*
Display destination map (when en route, shows the map of the destination)
Display entire route (when en route, adjusts the map scale so that the entire route is displayed)
Register the current location (puts current location in the personal
Address Book)
* These commands are not available if you scroll through the map while en route to a destination.
138
Navigation System
Navigation Display
Commands
The system accepts these commands on a map/guidance screen.
Display current location (shows current latitude, longitude, and elevation)
Display north up
Display heading up
Display zoom in
Display zoom out
Display: (the selected scale)
1/20 mile (80 m) scale
1/8 mile (200 m) scale
1/4 mile (400 m) scale
1/2 mile (800 m) scale
1 mile (1600 m) scale
2 mile (3 km) scale
5 mile (8 km) scale
15 mile (24 km) scale
50 mile (80 km) scale
150 mile (240 km) scale
350 mile (560 km) scale
Display: (display the selected icon on the screen)
ATM gas station restaurant
post office*
grocery store
lodging (hotel, motel)*
parking garage*
parking lot*
school*
hospital*
one way*
freeway exit information
* These icons will not be displayed unless the “Parking” or “Other icon” is selected on the Icon Bar (see page 58).
Voice Command Index
Hide: (hide the selected icon from the screen)
ATM gas station restaurant post office grocery store
lodging (hotel, motel)
parking garage parking lot school hospital one way freeway exit information
Max zoom in
Max zoom out
Go home
Navigation System
139
Voice Command Index
Find Place Commands
The system accepts these commands on a map/guidance screen.
Find nearest: (find the nearest selection)
ACURA dealers
HONDA dealers gas station hydrogen station
ATM bank post office hospital police station hotel tourist attraction
restaurant (all restaurant types)
American restaurant
Chinese restaurant fast food
Italian restaurant
Japanese restaurant
Mexican restaurant seafood restaurant
shopping (all shopping types)
parking garage
140
Navigation System
parking lot other car dealers auto parts & electronics auto repair & maintenance car wash & detailing motorcycle dealers roadside assistance check cashing currency exchange veterinarian
Korean restaurant
Californian restaurant continental restaurant
French restaurant
German restaurant
Greek restaurant
Indian restaurant
Thai restaurant vegetarian restaurant
Vietnamese restaurant other restaurant business civic center convention center library school city hall court house higher education amusement park golf course historical monument marina movie theater museum park performing arts sports complex bed & breakfast accessory store book store clothing store grocery store home improvement store mall office supply store pharmacy pet food store sewing store shoe store sporting goods store toy store
airport automobile club bus station camping commuter rail station ferry terminal named place park & ride rental car agency resort rest area ski area tourist information train station travel agency truck stop
Radio Voice Commands
The system accepts these commands on most screens.
Audio on*
Audio off*
Radio on*
Radio off*
Radio select FM1
Radio select FM2
Radio select AM
Radio tune to # FM (#: frequency.
Example Radio 95.5 FM)
Radio tune to # AM (#:frequency.
Example Radio 1020 AM)
Radio seek up
Radio seek down
Radio next station (same as Radio
seek)
Radio preset # (#: 1-6)
Radio FM preset # (#: 1-6)
Radio FM1 preset # (#: 1-6)
Radio FM2 preset # (#: 1-6)
Radio AM preset # (#: 1-6)
Radio auto select*
Radio scan*
Radio select XM1
Radio select XM2
Voice Command Index
XM channel # (#: 1-255)
XM channel up
XM channel down
XM category up
XM category down
XM preset # (#: 1-6)
XM1 preset # (#: 1-6)
XM2 preset # (#: 1-6)
XM scan*
XM category scan*
XM channel scan*
XM category mode
XM channel mode
* Repeating these commands switches
(toggles) the function between On and Off, so the action that occurs may not match the command you speak.
NOTE:
Radio volume levels cannot be controlled using voice control. Use the buttons on your steering wheel. See your vehicle Owner’s manual for more information.
Navigation System
141
Voice Command Index
CD Voice Commands
The system accepts these commands on most screens.
CD play
CD play track # (#: 1-30)
CD skip forward
CD skip back
CD track random*
CD track repeat*
CD track scan*
CD folder random*
CD folder repeat*
CD folder scan*
CD normal play
CD track list
* Repeating these commands switches
(toggles) the function between On and Off, so the action that occurs may not match the command you speak.
PC Card Voice Commands
The system accepts these commands on most screens.
Card play
Card play track # (#: 1-30)
Card skip forward
Card skip back
Card track random*
Card track repeat*
Card track scan*
Card folder random*
Card folder repeat*
Card folder scan*
Card artist random*
Card artist repeat*
Card artist scan*
Card album random*
Card album repeat*
Card album scan*
Card normal play
Card track list
* Repeating these commands switches
(toggles) the function between On and Off, so the action that occurs may not match the command you speak.
AUX Voice Commands
The system accepts these commands on most screens.
AUX play (or Auxiliary play)
NOTE:
For more information on USB features, see the vehicle Owner’s manual.
142
Navigation System
Information Screen Voice
Commands
These are additional commands not found on the Voice Command Help screen available when viewing the
Information
screen. Follow the voice prompts.
Cellular phonebook
Voice command help (the system reads and lists all of the commands, starting with
Navigation General Commands)
Map legend
Calendar
Calculator
Setup Screen (first)
Commands
The system accepts these commands on
Setup screen (first). (For Setup screen
(second), simply say what is written on the screen, and follow the voice prompts.)
Brightness up
Brightness down
Brightness minimum/min.
Brightness maximum/max.
Volume up (tone indicates volume)
Volume down (tone indicates volume)
Volume minimum/min. (tone indicates volume)
Volume maximum/max. (tone indicates volume)
Volume Off
Display off (screen goes dark, route guidance stops)
Display Day
Display Night
Display Auto
Contrast adjust
Guidance Prompts normal
Guidance Prompts maximum/max.
Guidance Prompts minimum/min.
Voice Command Index
Navigation System
143
Voice Command Index
On-Screen Commands
The system accepts these commands on any screen. There are over 100 onscreen commands. Just say what is written on the screen (this excludes keyboard letters, and listed items)
Next (or “Down”)
Previous (or “Up”)
Return
OK (except at
Disclaimer
screen)
Delete
Done
On-Screen Commands Assist
Say or touch the desired letter. When speaking the letters or using “spell mode,” you can substitute the name that represents each letter or symbol. This improves recognition.
NOTE:
• The system will only respond to the names shown in the graphic below.
• For instance, to select the letter “A,” you can touch the “A” on the screen, or say
“A,” or say “Alpha” or “Apple.”
To select the number “1,” touch the “1” on the screen, or say “one,” or say
“Number One.”
To select the symbol “- (hyphen),” touch the “-” on the screen, or say “Hyphen,” or say “Symbol Hyphen.”
• When selecting letters using the voice control system, a confirmation box may pop up to confirm the letter.
Alpha
Apple
Bravo
Boy
Charlie
Delta
Dog
Echo
Edward
Foxtrot
Frank
Golf
George
Hotel
Henry
India
Igloo
Juliet
John
Apostrophe
Kilo
King
Lima
Larry
Mike
Mary
November
Nancy
Oscar
Papa
Paul
Quebec
Queen
Romeo
Robert
Sierra
Sam
Tango
Tom
Ampersand
Uniform
Uncle
Victor
Whiskey
William
X-ray
Yankee
Yellow
Zulu
Zebra
Slash
144
Navigation System
Voice Command Index
Symbol Assist Definitions
NOTE:
The term “grave” used for these keys (
À
,
È
,
Ì
, and
Ù
) is pronounced like “save.”
Navigation System
145
Index
A
Accessing the Address Book List
ADD TO Today’s
.....78
Destinations
...........................42, 45
Adding Destinations to the List
Address
........42
..............................22, 23, 79
Address Book
.....................22, 43, 77
Address Book PIN
..........................81
Advanced
.......................................33
Alaska (Operation)
........................121
Auto Daylight Saving Time
Auto Service
.............94
...................................33
Auto Time Zone by GPS
.................95
AUX Voice Commands
.................142
Avoid Streets
..................................65
B
Back to Current Route
Banking
.....................66
..........................................33
Basic Settings
.................................93
Bluetooth® HandsFreeLink®
..........18
Breadcrumbs
.......................19, 60, 91
Brightness
By Address
......................................74
.....................................23
By Address Book
............................43
By Go Home
...................................44
By Intersection
................................27
146
Navigation System
By Map Input
................................. 36
By Places
....................................... 32
By Previous Destinations
................ 40
By Today’s Destinations
................. 41
C
Calculator
...................................... 72
Calendar
.................................. 17, 71
CALL ............................................ 18
CANCEL button
............................ 11
Cancel Current Route
..................... 66
Category
............................ 32, 43, 80
CD Voice Commands
................... 142
Cellular Phonebook
Change Method
........................ 69
.............................. 46
Change State
............................ 23, 28
Changing the DVD
....................... 105
Changing the Route
........................ 63
Changing the Routing Method ........ 46
Changing Your Destination
............. 66
City
................................... 23, 28, 38
City Vicinity
............................ 34, 35
Clock Adjustment
.......................... 94
Clock Screen
Clock Settings
........................... 17, 76
.......................... 17, 76
Clock Type
.............................. 17, 76
CLOSE button
Color
....................... 10, 105
............................................. 96
Community
.................................... 33
Continental USA
............................ 39
Contrast
......................................... 76
Convert (Unit)
................................ 73
Correct Vehicle Position
................. 92
Coverage Areas
............................ 108
Current Location
Current Position
...................... 20, 61
....................... 37, 79
Current Street
................................... 6
Customer Assistance
.................... 103
D
Database Limitations
.................... 101
Daylight Saving Time (DST)
Selection
..................................... 95
Delete Previous Destination
Destination
............ 82
........................ 22, 45, 66
Destination Icon
............................. 56
Destination Map ............................. 48
Detailed Coverage Areas
Detour
...... 108, 113
........................................... 65
Direct Route
Direction List
.................................. 46
................................. 52
Display .......................................... 75
Driving to Your Destination
............ 45
E
Easy Route
.....................................46
Edit Avoid Area
..............................88
Edit Waypoint Search Area
..............90
Edit/Delete Address
........................80
Editing Today’s Destinations List
....41
Emergency
.....................................33
Entering a Destination
.....................22
Entering Address
.............................78
Entering Security Code
....................97
Entering the Street Number
..............27
Entering Your Schedule
...................71
Error Message
...............................133
F
Find Place Commands
...................140
Frequently Asked Questions
..........123
G
Getting Started
................................10
Global Commands
........................138
Glossary
Go Home
.......................................135
..................................22, 44
Go Home PIN
.................................82
Going Off the Route
GPS Initialization
........................60
............................98
Index
Guidance Mode
.............................. 91
Guidance Prompts
Guidance Screen
.......................... 76
............................ 51
H
Hawaii (Operation)
....................... 121
Home Address
............................... 81
Honda Automobile Customer
Service ..................................... 103
Hotel/Motel (Lodging)
................... 33
I
Icon Bar
........................................ 58
INFO button
............................ 11, 69
Information
.................................... 69
Information Screen Voice
Commands ................................ 143
Intersection
.............................. 22, 27
J
Joystick
......................................... 11
K
Keyboard Layout
........................... 93
L
Landmark Icons
Leisure
............................. 56
.......................................... 33
Lodging (Hotel/Motel)
.................... 33
M
Map Color
..................................... 96
Map Coverage
.............................. 108
Map Input
................................ 22, 36
Map Legend
....................... 19, 50, 70
Map Matching
................................ 98
Map Orientation
............................. 55
Map Scale
...................................... 54
Map Screen
.............................. 19, 50
MAP/GUIDE button
................. 11, 51
Maximize Freeways
....................... 46
MENU button
Menu Color
.......................... 11, 22
................................... 96
Message
........................................ 72
Microphone
................................... 12
Minimize Freeways
........................ 46
Minimize Toll Roads
...................... 46
Navigation System
147
Index
N
Name
.................................32, 36, 78
NAVI BACK button
........................12
NAVI TALK button
........................12
Navigation Display Commands
......139
Navigation General Commands
......138
O
Off-road Tracking
.....................60, 91
One-Way Traffic Icon
.....................56
On-Screen Commands
...................144
On-Screen Commands Assist
.........144
On-Screen Keyboard
.......................15
P
PC Card
........................................106
PC Card Voice Commands
Personal Information
............142
.......................77
Phone Number
....................32, 36, 79
PIN Number
Place Name
...................................81
..............................34, 36
Place Name by Keyword
Places
.................34
.................................22, 32, 79
Previous Destinations
..........22, 40, 79
R
Radio Voice Commands
Read List
............... 141
....................................... 70
Recalculation
................................. 83
Reporting Errors
.......................... 103
Reroute
.......................................... 63
Rerouting
Restaurant
...................................... 83
..................................... 33
Routing & Guidance
....................... 83
S
Save Current Location
Schedule
.................... 61
........................................ 71
Screen
........................................... 11
Security Code
................................ 97
Selecting the City
..................... 23, 28
Selecting the State or
Province
............................... 23, 28
Selecting the Street
................... 25, 30
Setup
............................................. 74
Setup Screen (first) Commands
..... 143
Shopping
....................................... 33
Showing Icons on the Map
........ 56, 58
Sort by Distance to Travel
Split-Screen Guidance
........ 34, 35
.................... 53
State
.............................................. 38
Street
....................................... 25, 30
148
Navigation System
System Controls
............................. 10
System Function Diagram
............... 21
System Information
System Initialization
........................ 93
....................... 97
System Limitations
......................... 99
System Setup
................................. 74
System Start-up
.............................. 16
T
Time Adjustment
Title
........................... 95
.............................................. 72
Today’s Destinations
................ 22, 41
Today’s Destinations List
............... 41
Travel ............................................ 33
Troubleshooting
........................... 133
U
Unit Conversion
............................. 73
Units (mile or km)
.......................... 93
Unverified Area Routing
........... 84, 85
Unverified Streets
............................ 7
Update DVD ................................ 104
User Name
..................................... 82
Using the Voice Control System
...... 13
V
Vehicle
...........................................91
Verified Streets
.................................7
View Routes
...................................47
Voice Command Help
.....................69
Voice Command Index
Voice Control Basics
..................138
.......................12
Voice Recognition Feedback
............93
Voice Recognition, Improving
Volume
.........13
..........................................74
Z
ZOOM buttons
................................11
Index
Navigation System
149
License notice
You have acquired a device (“DEVICE”) that includes software licensed by ALPINE
ELECTRONICS, INC., from an affiliate of
Microsoft Corporation (collectively “MS”).
Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The
SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END
USER LICENSE AGREEMENT
(“EULA”), DO NOT USE THE DEVICE
OR COPY THE SOFTWARE. INSTEAD,
PROMPTLY CONTACT ALPINE
ELECTRONICS,INC., FOR
INSTRUCTIONS ON RETURN OF THE
UNUSED DEVICE(S) FOR A REFUND.
ANY USE OF THE SOFTWARE,
INCLUDING BUT NOT LIMITED TO
USE ON THE DEVICE, WILL
CONSTITUTE YOUR AGREEMENT TO
THIS EULA (OR RATIFICATION OF
ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE.
This EULA grants you the following license;
You may use the SOFTWARE only on the
DEVICE.
NOT FAULT TOLERANT. THE
SOFTWARE IS NOT FAULT
TOLERANT. ALPINE ELECTRONICS,
INC., HAS INDEPENDENTLY
DETERMINED HOW TO USE THE
SOFTWARE IN THE DEVICE, AND MS
HAS RELIED UPON ALPINE
ELECTRONICS, INC., TO CONDUCT
SUFFICIENT TESTING TO DETERMINE
THAT THE SOFTWARE IS SUITABLE
FOR SUCH USE.
NO WARRANTIES FOR THE
SOFTWARE. THE SOFTWARE is provided “AS IS” and with all faults. THE
ENTIRE RISK AS TO SATISFACTORY
QUALITY, PERFORMANCE,
ACCURACY, AND EFFORT
(INCLUDING LACK OF NEGLIGENCE)
IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST
INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE OR
AGAINST INFRINGEMENT. IF YOU
HAVE RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR THE
SOFTWARE, THOSE WARRANTIES DO
150
Navigation System
NOT ORIGINATE FROM, AND ARE
NOT BINDING ON, MS.
No Liability for Certain Damages. EXCEPT
AS PROHIBITED BY LAW, MS SHALL
HAVE NO LIABILITY FOR ANY
INDIRECT, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL
DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE.
THIS LIMITATION SHALL APPLY
EVEN IF ANY REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. IN NO EVENT
SHALL MS BE LIABLE FOR ANY
AMOUNT IN EXCESS OF U.S.TWO
HUNDRED FIFTY DOLLARS
(U.S.$250.00).
Limitations on Reverse Engineering,
Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
Additional Software/Services. The
SOFTWARE may permit ALPINE
ELECTRONICS,INC.,, MS, Microsoft
Corporation or their affiliates to provide or make available to you SOFTWARE updates, supplements, add-on components, or Internet-based services components of
the SOFTWARE after the date you obtain your initial copy of the SOFTWARE
(“Supplemental Components”).
• If ALPINE ELECTRONICS,INC., provides or makes available to you
Supplemental Components and no other
EULA terms are provided along with the
Supplemental Components, then the terms of this EULA shall apply.
• If MS, Microsoft Corporation or their affiliates make available Supplemental
Components, and no other EULA terms are provided, then the terms of this
EULA shall apply, except that the MS,
Microsoft Corporation or affiliate entity providing the Supplemental
Component(s) shall be the licensor of the
Supplemental Component(s).
ALPINE ELECTRONICS,INC.,, MS,
Microsoft Corporation and their affiliates reserve the right to discontinue any Internetbased services provided to you or made available to you through the use of the
SOFTWARE.
RECOVERY MEDIA. If SOFTWARE is provided by ALPINE
ELECTRONICS,INC., on separate media and labeled “Recovery Media” you may use the Recovery Media solely to restore or reinstall the SOFTWARE originally installed on the DEVICE.
SOFTWARE TRANSFER ALLOWED
BUT WITH RESTRICTIONS. You may permanently transfer rights under this
EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the
SOFTWARE is an upgrade, any transfer must also include all prior versions of the
SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is of USorigin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the
U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by
U.S. and other governments.
For additional information on exporting the
SOFTWARE, see http://
www.microsoft.com/exporting/.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada
Standard RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference that may cause undesired operation of the device.
Navigation System
151
Advertisement
Key features
- Enter destinations by address, intersection, or place name
- Get turn-by-turn directions
- Find nearby businesses, restaurants, and other points of interest
- Use voice commands to control the system
- Get help with voice commands
- View information about your current location
- Add and save your favorite destinations
- Change the routing method
- Get off-road tracking