Grandstream Device Configuration Admin Password: (purposely not

Grandstream Device Configuration

STATUS

Admin Password:  

BASIC SETTINGS ADVANCED SETTINGS FXS PORT

(purposely not displayed for security protection)

Layer 2 QoS:

 802.1Q/VLAN Tag   0

     SIP 802.1p   0

     RTP 802.1p   0

(0-4094)

(0-7)

(0-7)

STUN server is :  

Keep-alive Interval:   20

(URI or IP:port)

(in seconds, default 20 seconds)

Use STUN to detect network connectivity:

  No  

  Yes, total STUN response misses 3 to restart DHCP (mininum=3)

Use DNS to detect network connectivity:  

No     Yes

Firmware Upgrade and Provisioning:   Upgrade Via     TFTP     HTTP     HTTPS

          Firmware Server Path: fm.grandstream.com/gs

          Config Server Path: fm.grandstream.com/gs

          XML Config File Password:

          HTTP/HTTPS User Name:

          HTTP/HTTPS Password:

Always send HTTP Basic Authentication Information

Send HTTP Basic Authentication Information only when challenged

          Firmware File Prefix:

          Config File Prefix:    

          Firmware File Postfix:

          Config File Postfix:    

  Allow DHCP Option 66 to override server:

              No     Yes

  Automatic Upgrade:

              No     Yes, every 10080

              Yes, daily at hour 1

minutes(30-5256000).

(0-23).   Yes, weekly on day 1 (0-6).

    Always Check for New Firmware at Boot up

    Check New Firmware only when F/W pre/suffix changes

    Always Skip the Firmware Check

Disable SIP NOTIFY Authentication:   No      Yes  (Device will not challenge NOTIFY with 401 when set to Yes)

Authenticate Conf File:   No      Yes   (cfg file would be authenticated before acceptance if set to Yes)

 

SIP TLS Certificate:

 

SIP TLS Private Key:

SIP TLS Private Key Password:  

ACS URL:  

ACS Username:  

ACS Password:  

Periodic Inform Enable:   No       Yes  

Periodic Inform Interval:  

300

Connection Request Username:  

Connection Request Password:  

 

CPE SSL Certificate:

CPE SSL Private Key:

 

Country Specific Deployment:   None (Default)

System Ring Cadence:   c=2000/4000;

Call Progress Tones:

Dial Tone:

Ringback Tone:

Busy Tone:

Reorder Tone:

  f1=350@­17,f2=440@­17,c=0/0;

  f1=440@­17,f2=480@­17,c=2000/4000;

  f1=480@­21,f2=620@­21,c=500/500;

 

Confirmation Tone:   f1=480@­21,f2=620@­21,c=250/250; f1=350@­11,f2=440@­11,c=100/100­100/100­100/100;

Call Waiting Tone:   f1=440@­13,c=300/10000;

Prompt Tone:   f1=350@­17,f2=440@­17,c=0/0;

Syntax: f1= val val on1 off1 on2 off2

(Frequencies are in Hz and cadence on and off are in ms)

Prompt Tone Access Code:

  default.)

(Key pattern to get Prompt Tone. Maximum 20 digits. No

Lock Keypad Update:   No       Yes   (configuration update via keypad is disabled if set to Yes)

Disable Voice Prompt:   No       Yes   (voice prompt is disabled if set to Yes)

Disable Direct IP Call:   No       Yes   (direct IP call is disabled if set to Yes)

NTP Server:   us.pool.ntp.org

Allow DHCP option 42 to override

NTP server:  

Syslog Server:  

No   Yes

Syslog Level:   NONE

Send SIP Log:   No   Yes

Download Device Configuration:

Download

Upload firmware: Upload from local directory

(URI or IP address)

Update    Apply    Cancel    Reboot

All Rights Reserved Grandstream Networks, Inc. 2006-2014