AC Adapter for ER-X Series Instruction Manual, MJECK

AC Adapter for ER-X Series Instruction Manual, MJECK
INSTRUCTION
MANUAL
AC Adapter for ER-X Sereis
ER-XAPS, ER-XAPS-EX
4 CONNECTOR WIRING DIAGRAM
<Cabling connector>
Terminal No.
Description
1
0V
2
COM(-)
3
Discharge control input
4
COM(OUT)
5
F.G. terminal
6
24V
7
COM(+)
8
9
Alarm output
10
Error output
Cable insertion end
1 2 3 4 5
6 7 8 9 10
MJECK-ERXAPS No.0053-93V
1 OUTLINE
●● This product is an AC adapter which is designed for use
with the ER-X series.
2 SPECIFICATIONS
Designation
AC Adapter for ER-X series
ER-XAPS(-EX)
Item
Model No.
Input voltage
100 to 240V AC、50 / 60Hz (Note)
Output voltage
24V DC ±5%
Output current capacity
1.5A
Ambient
0 to +40 ℃ (No dew condition is allowed.)
temperature
Storage: -20 to +85℃
Ambient humidity
5 to 95%RH, Storage: 5 to 95%RH
Weight
Approx. 220g
Accessories
AC cable: 1pc. Rating 125V AC (Note)
Wiring connector terminals: 6 pcs.
[Manufactured by MOLEX: 5556TL terminals]
Cable insertion end
Connector side
Notes:1)If using the input and output signals, use the accessory wiring connector terminals to connect the cabling connector to
the external equipment. Prepare a cable for connecting to
the external equipment.
Applicable cable: AWG 18 to 24
Terminal attaching tool: No. 57022-5500 manufactured by
MOLEX (recommended)
In addition, if not using the input and output signals, do not
insert anything into the cabling connector.
2)
Make sure to connect the F.G. wire to enclosure of the system
or ground.
5 DIMENSIONS(Unit: mm)
(22.2)
(14.4)
(19.6)
Thank you very much for purchasing Panasonic products.
Read this Instruction Manual carefully and thoroughly for
the correct and optimum use of this product. Kindly keep
this manual in a convenient place for quick reference.
Cable 1.8m
95.9
Note:Rating of the AC cable is 125V AC. In case using at more than
125V, prepare a proper cable by yourself. And, the AC cable is
not enclosed with ER-XAPS-EX.
3 CAUTIONS
●● Do not use this product in environments which are outside the specification range, otherwise operating problems or damage may occur. In addition, the operating
life of the product may become significantly reduced.
●● Do not run the wires together with high-voltage lines or
power lines or put them in the same raceway. This can
cause malfunction due to induction.
●● Never disassemble, repair or modify this product, otherwise operating errors or accidents may occur.
●● Do not throw this into fire, otherwise it may explode or
emit toxic gases.
●● This product is not designed to be explosion-proof. Do
not use it if there is a danger of fire or explosions.
●● Avoid using this product in places where large amounts
of steam or dust may be present.
●● Do not allow the product to come into direct contact
with organic solvents such as thinner or with water, oil
or grease.
43.8
28
F.G. wire 3.7m
AC cable 1.8m(Note)
Note:The AC cable is not enclosed
with ER-XAPS-EX
http://panasonic.net/id/pidsx/global
Overseas Sales Division (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-568-33-7861 FAX: +81-568-33-8591
For sales network, please visit our website.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
PRINTED IN JAPAN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement