OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LM6200 series LM6250 series LM6400 series LM6450 series P/NO : MFL67468132 (1209-REV06) LM6700 series LM7200 series LM7600 series www.lg.com 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. Clean only with a dry cloth. yy The lightning flash with arrowhead WARNING/CAUTION symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not block any ventilation openings. Install yy in accordance with the manufacturer’s instructions. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Do not install near any heat sources such yy as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. Do not defeat the safety purpose of the yy polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Short-circuit Breaker Short-circuit Breaker Refer all servicing to qualified service yy personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Short-circuit Breaker Do not stick metal objects or any other yy conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. Short-circuit Power Supply ENGLISH Unplug this apparatus during lightning yy storms or when unused for long periods of time. Short-circuit Breaker Short-circuit Breaker Keep the packing anti-moisture material or yy vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. CAUTION concerning the Power Cord yy (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged Power Supply wall outlets, extension cords, frayed power Power Supply cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and Power if Supply its appearance indicates damage or deterioration, unplug it, discontinue use of Power Supply the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where Power Supply the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 3 4 IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Short-circuit Breaker Power Supply ENGLISH Grounding yy (Except for devices which are not grounded.) Ensure that you connect the earth Power ground Supply Short-circuit wire to prevent possible electric shock Breaker (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Short-circuit Breaker As long as this unit is connected to the AC yy wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any yy way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. ANTENNAS Outdoor antenna grounding yy (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Power Supply DISCONNECTING DEVICE FROM THE MAIN yy POWER Mains plug is the disconnecting device. The plug must remain readily operable. Antenna Lead in Wire Ground Clamp Antenna Discharge Unit (NEC Section 810-20) Electric Service Equipment Grounding Conductor (NEC Section 810-21) Ground Clamp NEC: National Electrical Code Power Service Grounding Electrode System (NEC Art 250, Part H) IMPORTANT SAFETY INSTRUCTIONS Never touch this apparatus or antenna during yy a thunder or lightning storm. When mounting a TV on the wall, make sure yy not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects yy to fall into the product, and do not drop anything onto the screen. Dot Defect yy The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. Generated Sound yy “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation yy openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. If the TV feels cold to the touch, there may yy be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. ENGLISH Cleaning yy When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. Moving yy Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Ventilation yy Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming yy from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with a yy Supply hand or a sharp objectShort-circuit such as aPower nail, pencil Breaker or pen, or make a scratch on it. Keep the product away from direct sunlight. yy 5 6 IMPORTANT SAFETY INSTRUCTIONS DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. Preventing “Image burn” or “Burn-in” on your TV screen ENGLISH If a fixed image displays on the TV screen yy for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for yy a long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV yy screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn. For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging WARNING Viewing Environment Viewing Time yy - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Symptoms which require discontinuation or refraining from watching 3D contents Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until yy the symptom subsides. - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. ENGLISH Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents. Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as yy epilepsy, cardiac disorder, or blood pressure disease, etc. 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. yy Double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble yy sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D yy contents. 8 IMPORTANT SAFETY INSTRUCTIONS CAUTION Viewing Environment Viewing Distance yy - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age ENGLISH Infants / Children yy - Usage/ Viewing 3D contents for children under the age of 5 are prohibited. - Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents. - Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. Teenagers yy - Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired. Elderly yy - The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance. Cautions when using the 3D glasses Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yy Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yy Using modified 3D glasses may cause eye strain or image distortion. yy Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. yy The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when yy wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. LICENSES / OPEN SOURCE SOFTWARE NOTICE 9 LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.” “Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274” Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit 'http://opensource.lge.com'. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to '[email protected]'. This offer is valid for three (3) years from the date on which you purchased the product. ENGLISH “DivX Certified® to play DivX® video up to HD 1080p, including premium content.” 10 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS 30 REMOTE CONTROL 7 Viewing 3D Imaging 9 LICENSES 30 31 31 31 9 OPEN SOURCE SOFTWARE NOTICE Magic Remote Control Functions -Registering Magic Remote Control -How to use Magic Remote Control -Precautions to Take when Using the Magic Remote Control 10 TABLE OF CONTENTS 32 WATCHING TV 32 Turning the TV on for the first time 11 Installation Procedure 33 Using the User guide 11 ASSEMBLING AND PREPARING 34 SPECIFICATIONS 11 13 14 16 17 17 18 19 20 Unpacking Optional Extras Parts and buttons Lifting and moving the TV Setting up the TV -Attaching the stand -Mounting on a table -Tidying cables -Mounting on a wall 21 MAKING CONNECTIONS 21 22 Connecting to an antenna or cable Connecting to a HD receiver, DVD, or VCR player -HDMI Connection -DVI to HDMI Connection -Component Connection -Composite Connection Connecting to a PC -HDMI Connection, DVI to HDMI Connection or RGB Connection Connecting to an Audio System -Digital Optical Audio Connection Connecting to a USB 22 23 24 25 26 26 28 28 29 40 MAINTENANCE 40 40 40 Cleaning Your TV -Screen, frame, cabinet and stand -Power cord 40 TROUBLESHOOTING NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may yy differ slightly from that shown in this manual. The available menus and options may differ yy from the input source or product model that you are using. New features may be added to this TV in yy the future. Instalation Procedure / ASSEMBLING AND PREPARING 11 Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking CAUTION Do not use any unapproved items to ensure the safety and product life span. yy Any damages or injuries by using unapproved items are not covered by the warranty. yy In case of some model, the thin film on screen is a part of TV, So don’t take it off. yy NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to yy upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 yy inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit yy into your TV's USB port. B A *A *B B A 10 mm (0.39 inches) 18 mm (0.7 inches) ENGLISH Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. 12 ASSEMBLING AND PREPARING ENGLISH Magic remote control, Batteries (AA) (See p.30) Owner’s manual Cable holder (Depending on model) (See p.19) Stand screws 8 EA, M4 x 20 (See p.17) Component video cable (See p.24) Composite video cable (See p.24, 25) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Stand Body (See p.17) Stand Base (See p.17) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Power cord (Depending on model) Wall mount inner spacers 4 EA (Depending on model) (See p.20) Desk-mount screw 2 EA (Depending on model) (See p.18) Bracket screw M4 x 8, 2 EA (Depending on model) (See p.18) Desk-mount cable 2 EA (Depending on model) (See p.18) ASSEMBLING AND PREPARING 13 Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies. AN-MR300 Magic remote control AG-F*** Cinema 3D glasses AN-VC*** Video Call Camera ENGLISH 14 ASSEMBLING AND PREPARING Parts and buttons For LM6400/6450/6700/7200/7600 series Screen ENGLISH Buttons Speakers Button Remote control and intelligent1 sensors Power indicator Description / (^ / v) Scrolls through the saved channels. / (+ / -) Adjusts the volume level. (OK ⊙) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus. (INPUT) Changes the input source. (ꔰ / I) Turns the power on or off. 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. ASSEMBLING AND PREPARING 15 For LM6200/6250 series Screen Remote control and intelligent sensors1 Power indicator OK SETTINGS Touch Button INPUT Touch buttons2 Description v/^ Scrolls through the saved channels. -/+ Adjusts the volume level. OK ⊙ Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. ꔰ/I Turns the power on or off. 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger. ENGLISH Speakers 16 ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as yy this may result in damage to the screen. It is recommended to move the TV in the yy box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect yy the power cord and all cables. When holding the TV, the screen should face yy away from you to avoid damage. ENGLISH Hold the top and bottom of the TV frame yy firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. When transporting the TV, do not expose the yy TV to jolts or excessive vibration. When transporting the TV, keep the TV yy upright, never turn the TV on its side or tilt towards the left or right. ASSEMBLING AND PREPARING 17 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand 1 4 4 EA M4 x 20 Stand Body Front Stand Base Top View 2 4 EA M4 x 20 Wrapping bag (Depending on model) CAUTION When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 5 Protection pad (Depending on model) 3 NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. ENGLISH CAUTION Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much yy force; otherwise they may be worn out and get loosened. 18 ASSEMBLING AND PREPARING Mounting on a table CAUTION 1 Lift and tilt the TV into its upright position on a table. -Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inch 10 cm When adjusting the angle of the TV, watch yy out for your fingers. - Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. es) 10 cm 10 cm Front Rear Securing the TV to a table 2 Connect the power cord to a wall outlet. CAUTION ENGLISH Do not place the TV near or on sources yy of heat, as this may result in fire or other damage. (Depending on model) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. 1 Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. 2 Fix the Desk-mount Cables to a table using the Desk-mount Screws. Adjusting the angle of the TV to suit view Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. 10˚ 3 Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries. 10˚ M4 x 8 2 EA WARNING To prevent TV from falling over, the TV yy should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) 19 Tidying cables 1 Gather and bind the cables with the cable management clip. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. 2 Gather and bind the cables with the cable holder on the back of the TV. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. Caution Make sure that children do not climb on or yy hang on the TV. Cable holder NOTE Use a platform or cabinet that is strong and yy large enough to support the TV securely. Brackets, bolts and ropes are optional. You yy can obtain additional accessories from your local dealer. CAUTION Do not move the TV by holding the cable yy holder and cable management clip, as the cable holders may break, and injuries and damage to the TV may occur. ENGLISH -If there are bolts inserted at the eye-bolts position, remove the bolts first. Cable management clip 20 ASSEMBLING AND PREPARING Mounting on a wall CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm (4 inches) 10 cm 10 cm 10 cm NOTE ENGLISH Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model VESA (A x B) A B 32LM6200 200 x 200 Standard screw M6 Number of screws 4 Wall mount bracket LSW200BX (optional) LSW220BX Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the TV and void your warranty. Use the screws and wall mounts that meet yy the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. 42/47/55LM6200 47/55LM6250 47/55LM6400 60LM6450 42/47/55LM6700 60LM7200 47/55LM7600 400 x 400 M6 4 Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Make sure to use the proper length. For more information, refer to the manual yy supplied with the wall mount. When attaching a third-party wall mounting yy bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. LSW400BX LSW420BX Wall mount inner spacers MAKING CONNECTIONS 21 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable yy to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port. yy If you connect a gaming device to the TV, use the cable supplied with the gaming device. yy Refer to the external equipment’s manual for operating instructions. yy Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. UHF Antenna Antenna ANTENNA / CABLE Coaxial (75Ω) CAUTION Make sure not to bend the copper wire of yy the RF cable. Copper wire Complete all connections between devices, yy and then connect the power cord to the power outlet to prevent damage to your TV. Terminal NOTE Use a signal splitter to use more than 2 TVs. yy Visit http://lgknowledgebase.com for more yy information about the antenna and cable connection. Search for antenna. ENGLISH VHF Antenna 22 MAKING CONNECTIONS Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use. HDMI (*Not Provided) 1(ARC) 2 IN 3 ENGLISH DVD/ Blu-Ray / HD Cable Box / HD STB NOTE DTV Audio Supported Codec: MPEG, Dolby yy Digital HDMI Audio Supporeted Format: Dolby yy Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/ 88k/96k/176k/192k) -> Not supported DTS. ARC (Audio Return Channel) When connected with a high-speed yy HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable. ARC is only supported on the HDMI input yy 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC. MAKING CONNECTIONS 23 DVI to HDMI Connection 4 (PC) Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. DVI OUT IN (*Not Provided) (*Not Provided) AUDIO OUT DVD/ Blu-Ray / HD Cable Box AUDIO AUDIO ENGLISH (RGB/HDMI-PC) (RGB/HDMI-PC) 24 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with yy distorted color. Check to ensure each cable is matched with the corresponding color connection. yy ENGLISH YELLOW GREEN (Use the component video cable provided.) (Use the composite video cable provided.) GREEN BLUE RED GREEN BLUE RED RED WHITE RED WHITE YELLOW (*Not Provided) (*Not Provided) RED BLUE GREEN RED WHITE L R AUDIO VIDEO DVD/ Blu-Ray / HD Cable Box MAKING CONNECTIONS 25 Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE Check to ensure each cable is matched with the corresponding color connection. yy ENGLISH YELLOW (Use the composite video cable provided.) RED WHITE YELLOW RED WHITE YELLOW (*Not Provided) RED WHITE YELLOW VIDEO L (MONO) AUDIO R VCR / DVD/ Blu-Ray / HD Cable Box 26 MAKING CONNECTIONS Connecting to a PC NOTE It is recommended to use the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. The synchronization input form for Horizontal and Vertical frequencies is separate. yy Depending on the graphics card, some resolution settings may not allow the image to be positioned yy on the screen properly. HDMI Connection, DVI to HDMI Connection or RGB Connection Choose method A, B, or C to make connection. Method A: HDMI Connection 4 (PC) HDMI IN 3 (*Not Provided) 2 PC IN 4 (PC) 1(ARC) ENGLISH Choose any HDMI input port to connect. It is recommended to connect the DVI-HDMI to HDMI IN 4. (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO 1 2 27 4 (PC) 1(ARC) MAKING CONNECTIONS IN 4 (PC) Method B: DVI to HDMI Connection (*Not Provided) (RGB/HDMI-PC) (RGB/HDMI-PC) IN AUDIO AUDIO (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO AUDIO OUT (*Not Provided) AUDIO OUT DVI OUT ENGLISH PC Method C: RGB Connection (PC) (PC) RGB RGB (PC) (PC) RGB RGB (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO AUDIO OUT (*Not Provided) (*Not Provided) RGB OUT (PC) RGB OUT (PC) AUDIO OUT DVI OUT PC 28 MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature yy to off. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE Do not look into the optical output port. Looking at the laser beam may damage your vision. yy Audio with ACP (Audio Copy Protection) function may block digital audio output. yy ENGLISH OUT OPTICAL DIGITAL AUDIO (*Not Provided) OPTICAL AUDIO IN Digital Audio System MAKING CONNECTIONS 29 Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE To store apps on a USB storage device, make sure that it is connected to the USB IN 3 USB Apps yy port. To use a USB Hub device, make sure that it is connected to the USB IN 2 USB port. yy Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect yy it to the USB port on the TV directly. Choose any USB input port to connect. It does not matter which port you use. USB IN 1 USB OR ENGLISH HDD IN 2 USB Hub 3 USB Apps (*Not Provided) 30 REMOTE CONTROL REMOTE CONTROL Magic Remote Control Functions When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. yy Make sure to point the remote control at the remote control sensor on the TV. Pointer (RF transmitter) ENGLISH (POWER) Turns the TV on or off. BACK Returns to the previous level. Wheel (OK) Selects menus or options and confirms your input. Scrolls through the saved channels. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side. Used for viewing 3D video. HOME Accesses the Home menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. VOL Adjusts the volume level. CH Scrolls through the saved channels. (MUTE) Mutes all sounds. MY APPS Shows the list of Apps. Q.MENU Accesses the quick menu. REMOTE CONTROL Registering Magic Remote Control 1 31 2 i The Magic Remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows; How to register the Magic Remote Control (Wheel) To register automatically, turn the TV on and press the Wheel (OK). When registration is completed, the completion message appears on the screen. If registration fails, turn the TV off and back on, then press the Wheel (OK) to complete registration. How to Re-register the Magic Remote Control BACK How to use Magic Remote Control 1 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down. »»If the pointer does not work properly leave the remote control for 10 seconds then use it again. 2 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen. »»If the pointer has not been used for a certain period of time, it will disappear. 1 If you press Wheel (OK) on the Magic remote control, the screen appears. Shows information about the current program and screen. 2 Pressing this button will display number keypad which you can select channel number. 3 You can select My Apps Menu. Precautions to Take when Using the Magic Remote Control Use the Magic remote control within the yy maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to yy nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control. The Magic remote control may be damaged yy or may malfunction if it is dropped or receives a heavy impact. Take care not to bump into nearby furniture yy or other people when using the Magic remote control. Manufacturer and installer cannot provide yy service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP) yy be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference. ENGLISH HOME 1 Press and hold the BACK and HOME buttons together for 5 seconds to reset, then register it by following “How to register the Magic remote control” above. 2 To re-register the Magic remote control, press and hold the BACK button for 5 seconds toward the TV. 3 32 WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Initial Setting by yy accessing OPTION in the main menu. 3 Follow the on-screen instructions to customize ENGLISH your TV settings according to your preferences. Language Selection* Selects a language to display. Using the Magic remote Sets the Magic remote contol. control Enviroment Selection Select Home* for the home environment. Time Zone Setting Network Connection Auto Tuning Selects the time zone and daylight saving. (Depending on country) Sets your network to enable network-related features on the TV. Scans and saves available channels automatically. Auto Energy Saving mode Setting Selects Auto Energy Saving mode. (Depending on model) Setting is completed. Confirms the setting options. NOTE Select Home when prompted. Store yy mode puts the TV in demo mode. If you select Store, the any customized yy settings will switch back to the default settings of Store in 5 minutes. 4 When the basic settings are complete, press the Wheel (OK). NOTE If you do not complete the Initial setting, yy it will appear whenever the TV turns on. Disconnect the power cord from the yy power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press the power button on the remote control. Using the User guide Using the User guide 33 1 User Guide OPTION > To set language HOME Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. User Guide allows you to more easily access the detailed TV information. 1 Press CHANNEL Setting PICTURE, SOUND Setting Selects a screen menu language. Audio Language [In Digital Mode Only] Selects the desired language when watching digital broadcasting containing several audio languages. Voice Search Language OPTION HOME button to access the HOME Menu Language Select the language to make voice search. ✎ Only the voice search adopted model can support this setting. LG SMART Function menu. Advabced Function 2 Select User Guide and press the Information Wheel (OK). Try Now Zoom In 2 Close 3 HOME Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a screen menu language. [In Digital Mode Only] Selects the desired language when watching digital broadcasting containing several audio languages. Voice Search Select the language to make voice search. ✎O nly the voice search adopted model can support this Language setting. Audio Language Try Now User Guide To use Energy Saving feature CHANNEL Setting To set time options PICTURE, SOUND Setting To set TV lock options OPTION To set language LG SMART Function Disabled Assistance Advabced Function To set Magic Remote Control Information 2 1 2 3 1 Shows the description of the selected menu. You can use / to move between pages. 2 Moves to the selected menu directly from the User Guide. 3 Zooms in or out the screen. 4 To use input device 3 Shows the current channel. Allows to select the category you want. 3 Allows to select the item you want. You can use / button to move between pages. 4 Allows to browse the description of the function you want from the index. Close ENGLISH 1 User Guide Zoom Out 34 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement LM6200, LM6250 series: AC 100 - 240 V ~ 50 / 60 Hz The others: AC 120 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Ω Environment condition Operating Temperature 0 - 40 °C Operating Humidity Less than 80 % Storage Temperature -20 - 60 °C Storage Humidity Less than 85 % 32LM6200 (32LM6200-UE) MODELS ENGLISH Dimensions (Width x Height x Depth) Weight With stand 746.0 x 528.0 x 225.0 mm (29.3 x 20.7 x 8.8 inch) Without stand 746.0 x 462.0 x 35.5 mm (29.3 x 18.1 x 1.3 inch) With stand 10.0 kg (22.0 lbs) Without stand 8.5 kg (18.7 lbs) Current Value / Power consumption MODELS Dimensions (Width x Height x Depth) Weight 0.8 A / 80 W 42LM6200 (42LM6200-UE) 47LM6200 (47LM6200-UE) 47LM6250 (47LM6250-UD) With stand 979.0 x 670.0 x 263.0 mm (38.5 x 26.3 x 10.3 inch) 1089.0 x 730.0 x 263.0 mm (42.8 x 28.7 x 10.3 inch) Without stand 979.0 x 594.0 x 35.5 mm (38.5 x 23.3 x 1.3 inch) 1089.0 x 655.0 x 35.5 mm (42.8 x 25.7 x 1.3 inch) With stand 15.3 kg (33.7 lbs) 17.8 kg (39.2 lbs) Without stand 13.1 kg (28.8 lbs) 15.6 kg (34.3 lbs) 1.0 A / 100 W 1.2 A / 120 W Current Value / Power consumption SPECIFICATIONS 55LM6200 (55LM6200-UE) MODELS Dimensions (Width x Height x Depth) Weight 55LM6250 (55LM6250-UD) With stand 1263.0 x 830.0 x 331.0 mm (49.7 x 32.6 x 13.0 inch) Without stand 1263.0 x 754.0 x 35.5 mm (49.7 x 29.6 x 1.3 inch) With stand 25.3 kg (55.7 lbs) Without stand 21.9 kg (48.2 lbs) Current Value / Power consumption Dimensions (Width x Height x Depth) Weight With stand 1073.0 x 705.0 x 263.0 mm (42.2 x 27.7 x 10.3 inch) 1243.2 x 799.5 x 331.0 mm (48.9 x 31.4 x 13.0 inch) Without stand 1073.0 x 639.0 x 35.7 mm (42.2 x 25.1 x 1.4 inch) 1243.2 x 735.0 x 35.5 mm (48.9 x 28.9 x 1.3 inch) With stand 16.9 kg (37.2 lbs) 24.7 kg (54.4 lbs) Without stand 14.7 kg (32.4 lbs) 21.0 kg (46.2 lbs) 1.1 A / 110 W 1.2 A / 120 W MODELS Weight 60LM6450 (60LM6450-UA) With stand 1358.0 x 848.0 x 331.0 mm (53.4 x 33.3 x 13.0 inch) Without stand 1358.0 x 781.0 x 64.7 mm (53.4 x 30.7 x 2.5 inch) With stand 31.0 kg (68.3 lbs) Without stand 27.3 kg (60.1 lbs) Current Value / Power consumption 2.1 A / 210 W ENGLISH 55LM6400 (55LM6400-UA) Current Value / Power consumption Dimensions (Width x Height x Depth) 1.5 A / 150 W 47LM6400 (47LM6400-UA) MODELS 35 36 SPECIFICATIONS 42LM6700 (42LM6700-UA) 47LM6700 (47LM6700-UA) With stand 953.0 x 636.0 x 263.0 mm (37.5 x 25.0 x 10.3 inch) 1063.0 x 701.0 x 263.0 mm (41.8 x 27.5 x 10.3 inch) Without stand 953.0 x 566.0 x 33.4 mm (37.5 x 22.2 x 1.3 inch) 1063.0 x 628.0 x 33.4 mm (41.8 x 24.7 x 1.3 inch) With stand 14.8 kg (32.6 lbs) 17.5 kg (38.5 lbs) Without stand 12.6 kg (27.7 lbs) 15.3 kg (33.7 lbs) 1.0 A / 100 W 1.1 A / 110 W MODELS Dimensions (Width x Height x Depth) Weight Current Value / Power consumption 55LM6700 (55LM6700-UA) MODELS Dimensions (Width x Height x Depth) Weight With stand 1232.0 x 795.0 x 331.0 mm (48.5 x 31.2 x 13.0 inch) Without stand 1232.0 x 723.0 x 33.6 mm (48.5 x 28.4 x 1.3 inch) With stand 25.0 kg (55.1 lbs) Without stand 21.3 kg (46.9 lbs) Current Value / Power consumption 1.2 A / 120 W ENGLISH 60LM7200 (60LM7200-UA) MODELS Dimensions (Width x Height x Depth) Weight With stand 1358.0 x 848.0 x 331.0 mm (53.4 x 33.3 x 13.0 inch) Without stand 1358.0 x 781.0 x 64.7 mm (53.4 x 30.7 x 2.5 inch) With stand 31.0 kg (68.3 lbs) Without stand 27.3 kg (60.1 lbs) Current Value / Power consumption 47LM7600 (47LM7600-UA) 55LM7600 (55LM7600-UA) With stand 1063.0 x 701.0 x 263.0 mm (41.8 x 27.5 x 10.3 inch) 1232.0 x 795.0 x 331.0 mm (48.5 x 31.2 x 13.0 inch) Without stand 1063.0 x 628.0 x 33.4 mm (41.8 x 24.7 x 1.3 inch) 1232.0 x 723.0 x 33.6 mm (48.5 x 28.4 x 1.3 inch) With stand 17.5 kg (38.5 lbs) 25.0 kg (55.1 lbs) Without stand 15.3 kg (33.7 lbs) 21.3 kg (46.9 lbs) 1.3 A / 130 W 1.6 A / 160 W MODELS Dimensions (Width x Height x Depth) Weight 2.1 A / 210 W Current Value / Power consumption SPECIFICATIONS 37 3D supported formats Video, which is input as below media contents is switched into the 3D screen automatically. yy 3D supported mode automatically Input Signal 640 X 480 Horizontal Frequency (kHz) Vertical Frequency (Hz) 480p 720p HDMI 1080i 59.94 / 60 31.469 / 31.5 Top & Bottom, Side by Side(Half), Side by Side(Full) 62.938 / 63 Frame Packing, Line Alternative 44.96 / 45 59.94 / 60 Top & Bottom, Side by Side(Half), Side by Side(Full) 89.91 / 90 59.94 / 60 Frame Packing, Line Alternative 33.72 / 33.75 59.94 / 60 Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative 67.5 59.94 / 60 26.97 / 27 23.97 / 24 28.125 25 33.72 / 33.75 29.976 / 30 43.94 / 54 23.97 / 24 56.25 25 67.432 / 67.5 29.976 / 30 67.432 / 67.5 59.94 / 60 USB 1080p 33.75 30 DLNA 1080p 33.75 30 DTV Frame Packing, Line Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative Top & Bottom, Side by Side(Half) Side by Side(Half), Top & Bottom, Checker Board, MPO(Photo) Side by Side(Half), Top & Bottom, Checker Board Signal Playable 3D video format Frame Compatible Side by Side(Half), Top & Bottom ENGLISH 1080p Top & Bottom, Side by Side(Half), Side by Side(Full) 31.469 / 31.5 62.938 / 63 Playable 3D video format 38 SPECIFICATIONS For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode. yy 3D supported mode manually Input Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video format 720p 45.00 60 2D to 3D, Side by Side(Half), Top & Bottom, Single Frame Sequential 1080i 33.75 60 2D to 3D, Side by Side(Half), Top & Bottom 27.00 24 28.12 25 33.75 30 67.50 60 HDMI-DTV 1080p HDMI-PC ENGLISH RGB-PC Component 1024x768 48.36 1360x768 47.71 1920x1080 67.50 Others - 1024x768 48.36 1360x768 47.71 1920x1080 67.50 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Single Frame Sequential, Row Interleaving, Column Interleaving 2D to 3D, Side by Side(Half), Top & Bottom 60 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Single Frame Sequential, Row Interleaving, Column Interleaving - 2D to 3D 60 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D Others - - 720p 45.00 60 1080i 33.75 60 27.00 24 28.12 25 33.75 30 1080p 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board 2D to 3D, Side by Side(Half), Top & Bottom 67.50 60 Others - - 2D to 3D USB 1080p 33.75 30 DLNA 1080p 33.75 30 2D to 3D, Side by Side(Half),Top & Bottom, Checker Board, Row Interleaving, Column Interleaving(Photo : Side by Side(Half), Top & Bottom) DTV Signal Playable 3D video format HD 2D to 3D, Side by Side(Half), Top & Bottom SD 2D to 3D SPECIFICATIONS HDMI/DVI-DTV supported mode 39 Wireless LAN module (TWFM-B003D) specification Resolution Vertical Frequency (Hz) Horizontal Frequency (kHz) 720X480 31.469 31.5 59.94 60 1280X720 44.96 45 59.94 60 1920X1080 33.72 33.75 26.97 27 33.716 33.75 67.43 67.5 59.94 60 23.97 24 29.976 30.00 59.94 60 Component ports on the TV Video output ports on DVD player Y PB PR Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr Signal Component 480i O 480p O 720p/1080i O 1080p O (60 Hz only) IEEE802.11a/b/g/n Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 15 dBm 802.11b: 14 dBm Output Power (Typical) 802.11g: 17 dBm 802.11n - 2.4GHz: 17 dBm 802.11n - 5GHz: 15 dBm Data rate 802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 300 Mbps Antenna Gain (Typical) 2400 to 2483.5 MHz: -2.5 dBi 5150 to 5250 MHz: -2.2 dBi 5725 to 5850 MHz: -2.9 dBi Occupied bandwidth 802.11a/b/g: HT20 802.11n: HT20/40 Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. FCC ID of Wi-Fi module inside TV yy FCC ID: BEJTWFM-B003D Bluetooth module (BM-LDS302) specification Standard Bluetooth Version 3.0 Frequency Range 2400 ~ 2483.5 MHz Output Power (Max.) 10 dBm or lower Data rate (Max.) 3 Mbps Communication Distance Line of Open Sight approx. 10 m FCC ID of Bluetooth module inside TV yy FCC ID: BEJLDS302 ENGLISH Component port connecting information Standard 40 MAINTENANCE & TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended or unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION ENGLISH Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in yy scratches on the screen and image distortions. Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, yy lubricants, as these may damage the screen’s finish and cause discoloration. Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or yy malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet. yyCheck if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yyCheck the power control settings. The power supply may be interrupted. yyCheck if the Auto sleep feature is activated in the Time settings. yyIf there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. ). CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. yy Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury. THIS MANUFACURER CARES! yy The consumer electronics industry is committed to making home entertainment enjoyable and safe. TUNE INTO SAFETY yy O n e s i z e d o e s N O T f i t a l l . F o l l o w t h e m a n u f a c t u r e r ’ s recommendations for the safe installation and use of your flat panel display. yy Carefully read and understand all enclosed instructions for proper use of this product. yy Don’t allow children to climb on or play with furniture and television sets. yy Don’t allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. yy Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down. yy Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children. WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: yy Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). yy Follow all instructions supplied by the display and wall mount manufacturers. yy If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. yy Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. yy A m i n i m u m o f t w o p e o p l e a r e r e q u i r e d f o r i n s t a l l a t i o n . Flat panel displays can be heavy LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.com The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project