Technoline WT 475

Technoline WT 475
WT475 - INSTRUCTION MANUAL
LED ALARM CLOCK WITH TEMPERATURE
P. 1
Words in the figure:
Figure 1:
ENGLISH
Front View-Time display
TIME
ALARM ON
Front View-Temperature
display
INDOOR TEMPERATURE
Top View
DOWN
SET
SNOOZE
ALARM
UP/DIMMER
Back View
BATTERY DOOR
INSERT 1 x CR2032
BATTERY INSIDE THE
BATTERY COMPARTMENT
AC/DC ADAPTOR
INSERT AC/DC
ADAPTOR JACK
DC SOCKET
P. 2
QUICK SETUP
Step 1 Slide open the battery cover at the back of your clock, then insert 1 x CR2032 Lithium battery
to the battery compartment. Make sure +/- polarity of the battery are facing in the right directions.
Then replace the battery cover.
Step 2 Insert the AC/DC adaptor to any 230 AC household outlet. Then insert the DC jack to the
back case of your unit.
Your clock is ready to work for you.
Note: The battery is for back-up only and just helps to save your settings in cases of missing power.
There is no display in back-up mode.
TO SET TIME
1.
2.
3.
Press and hold SET for 2 seconds, hour digits flash. Press
/
Then press SET once again, the minute digits flash. Press
/
Then press SET once again, display 24 Hr and flash. Press
/
4.
Then press SET once again, display shows :05 and flash. Press
/
button to set
snooze duration from 5 minutes to 60 minutes.
Press SET to return to normal mode or it will return to normal mode in around 10 seconds if no
further press of any other buttons.
5.
to set hours.
button to set minutes.
button to set 12Hr /24Hr
TO SET ALARM (Default alarm setting is 6:00 AM)
1.
2.
3.
Press and hold AL, the hour digits flash with “AL” icon flashing. Press
/
to set your
desired alarm hours.
Press AL once again, the minute digits flash. Press
/
to set your desired alarm
minutes.
Press AL once to store your alarm setting and return to normal time display, or the clock
will return to normal mode in around 10 seconds if no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Single press AL one at a time to turn on or off the alarm. When the alarm function is turned on,
the AL icon appears on top of the time digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give a beep sound to wake you up. The AL
icon will flash.
1.
Press SNOOZE once to stop the alarm temporarily, AL icon keeps flashing. The alarm will
beep again in 5 minutes or after your set snooze duration.
2.
To stop the daily alarm, press AL when alarm is beeping. The alarm will stop and AL icon
becomes static; alarm will beep again same time next day.
Alarm Duration: 1 hour
P. 3
TO DISPLAY INDOOR TEMPERATURE
Simply press SNOOZE once, the time display will change to temperature display. Press SNOOZE
once to return to time display.
Press and hold SNOOZE for 2 seconds, your clock gives a short beep and will display time for 10
seconds and then display temperature for 5 seconds alternately. Press and hold SNOOZE will cancel
this and return to normal time display mode.
Mode 1:Time display
Mode 2:Temperature display
Mode 3:Press and hold SNOOZE:10 seconds time display ,5 seconds temperature display
TO USE THE DIMMER FUNCTION
Press
/ DIMMER once to adjust the High / Low brightness of the display.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electrostatic discharge or other interference, unplug the DC jack to disconnect the AC power (and remove
the backup battery). The clock will be reset to default settings and you need to set it again.
CARE OF YOUR LED ALARM CLOCK
1.
Do not expose the unit to extreme temperature, water or direct sunlight
2.
Avoid contact with any corrosive materials
3.
Do not subject the unit to excessive force, dust or humidity
4.
Do not open the inner back case or tamper with any components of this unit
5.
Do not plug in any other AC/DC adaptor with incorrect specifications or voltage
SPECIFICATIONS
Operation Temperature: 0°C to + 45°C
Indoor Temperature Display Range

0°C to +45°C
Temperature Resolution
Alarm Duration
Snooze Duration
AC/DC adaptor voltage
1°C
1 hour
5 minutes
5,5 V
P. 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement