Product Catalogue 2012

Product Catalogue 2012
Product
Catalogue
2012
Ph 0800 88 22 12
www.reids.co.nz
Welcome to Reid
Welcome to Reid Construction Systems, leading suppliers of lifting, reinforcing and connection systems,
providing solutions to the concrete construction industry for over 90 years.
Our engineered products are tried, tested and trusted by contractors throughout Australasia and we pride
ourselves with a rigorous quality assurance and testing regime, ensuring that the products are up to the
highest possible standard.
We aim to be much more than just a supplier of components to the concrete construction industry. We
work in partnership with you in all facets of planning, preparation, design, engineering certification,
forming, production, rigging, lifting, anchoring and bracing… all critical stages in the safe and efficient
manufacture and placement of concrete elements.
More comprehensive information on all our products are contained in the Reid range of Design Guides.
These can be downloaded from our website www.reids.co.nz. Hard copies are available for specifiers.
Reid provide a complimentary engineering advisory service to assist with specification of our range of
products. To use this service, call our engineering team on 0800 88 22 12.
This catalogue is a demonstration of our commitment to the industry and we hope you find it useful.
Ph 0800 88 22 12
www.reids.co.nz
Contact us
By Phone
Our trained Sales Service staff can efficiently take your order by phone. Sales Service can be
contacted at your nearest branch office or by calling the Toll Free number:
Toll Free: Hamilton: Wellington: 0800 88 22 12Auckland: 07 849 0643 Tauranga: 04 568 4505 Christchurch: 09 920 4360
07 575 7250
03 338 3844
By Facsimile
The easiest way to order by facsimile is to complete your Purchase Order and fax it to one of
the following numbers:
Toll Free: Hamilton: Wellington: 0800 88 22 55Auckland: 07 849 0642Tauranga: 04 568 0098
Christchurch: 09 920 4364
07 575 7259
03 338 8846
Via Email
Please send orders to: sales@reids.co.nz
Via your Sales Representative
If you would like one of our Sales Representatives to call at your business on a cycle suitable
to your needs, please call our Sales Service staff at your nearest branch.
Literature
Comprehensive technical information, data sheets and design guides are available.
Technical information is on the Web Site, or can be obtained by calling 0800 88 22 12.
Contents
Concrete lifting systems
formwork systems
Anchors10
Swiftlift™Face Lifting Anchors
10
Eye Anchors
11
Edge Lift & Hairpin Anchors
11
Recess Formers
Swiftlift™ Recess Formers
Plastic
Rubber
Steel
Steel Articulated
Edge Lift Recess Formers
11
11 11
12
12
12
Assemblies13
Face Lifting
13
Face Lifting - Puddle-in
13
Edge Lifting
14
Bar Chairs
Crown Spacers
Fast Clip Bar Chairs
Panel Bar Chairs
Slab Bar Chairs
Bar Chair (Misc)
Concrete Bar Chairs
14
14
14
15
15
15
16
Clutches17
Swiftlift™ Clutch17
Plate & Hairpin Clutch
17
Swiftlift™ Remote Release
17
zeus18
Accessories19
Swiftlift™ Anchor Cover Plates
19
Swiftlift™ Shear/Omega Bars
19
Panel Plates
19
Panel Pads
19
Pipe Chains
19
Propping & Accessories
Props Hire
Propping Anchors
Swift Shims
Propping Corner Brackets
Panel Lever Bar
SwiftForm™ 26
Aluminium Extruded Profile Section 26
End Caps 26
G-Clamp26
Extension Arms 26
Magnet27
Angle Bracket for Stack Casting 27
ReidForm™
Edgeform LVL 28
Extruded Fillet 28
Brackets28
Fillet 28
Fillet Cutter 28
Formwork Sealant 28
Double Sided Tape 28
GENERAL FORM RELEASE AGENTS 29
SwiftRelease General Release Agent 29
PINZ29
Retarders29
Retarder Paper 29
Removable Formwork Spikes 29
Insitu Formwork 30
Reidbar™ Wingnuts 30
Reidbar™ Formwork Cone, Conduit, Washers & Grommets 30
Nox-Crete
31
FormCoat E Form Release Agent 31
Bio-Nox Biodegradable Form Release 31
K-Concentrate31
Silcoseal Select BondBreaker 31
Formguard TJ 31
Sprayers & Tips 33
Accessories33
20
20
20
21
21
21
Hire22
Clutches22
Brackets22
Aluminium Boxing - Hire
22
Mistake Plates
22
Post Tensioning Jacks
22
IDAT23
Ph 0800 88 22 12
4
www.reids.co.nz
Range effective Jan 2011. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/01/11. This supersedes all previous versions.
Contents
reidbar components
architectural design
with concrete
reidbar™ components
Reidbar™ Couplers
Reidbar™ Nuts
Reidbar™ Foot Plates
Reidbar™ Flange Nuts
Reidbar™ Grout Sleeves
Reidbar™ Grout Sleeve (setting hardware) Grout
Reidbar™ Wing Nuts
Reidbar™ Threaded Inserts
Reidbar™ Reduced Threaded Insert
Reidbar™ Threaded Insert Chair
Reidbar™ Plastic Nail Plates
Reinforcing Grommets
36
36
36
36
37
37
37
37
38
38
38
38
38
reid™ metric components
Reid™ Threaded Insert Metric (TIM)
Reid™ Threaded Insert Metric Stainless Steel (TCM)
Reid™ Plastic Nail Plates Metric
Glue-on Nail Plate Metric
Locator Caps for Threaded Inserts
39
39
39
39
39
39
rockbolting/ground reinforcing
Reidbar™ Domed Base Plates
Reidbar™ Spherical Washers
Reidbar™ Spider Centralisers
Kwik-Zip Centraliser
Safety Protective Caps
40
40
40
40
40
40
CORROSION PROTECTION
Noxyde Water Based Elastomeric Membrane
41
41
nirvana insulated concrete panels
Connector Pins
Insulating Polystyrene
48
48
48
Flexus50
Modular Floor System
Modular Stair System
Shotbond
Flexus Installers
Flexus Pre-Bagged Mix
53
formliners54
reidbrace ™ 42
dowels & bearing strip
McDowel Bearing Strip
McDowel Dowel Sleeve Stock
43
43
43
Post-tensioning
Post-Tensioning Kits
Post-Tensioning Strand
44
44
5
Contents
PANEL TO PANEL
fasteners & tools
ORBIPLATE64
Orbiset64
Flat Square Washers
64
CAST-IN CHANNEL
65
LIEBIG STRUCTURAL ANCHORS
Liebig Heavy Duty Anchors
Liebig Component Sets
Liebig Superplus Self Undercutting Anchors
Propping Anchors
Flat Square Washers
74
74
74
74
74
74
SPATEC PLUS™ SAFETY ANCHORS
76
CORRUGATED TUBE
65
Spatec Plus™ Safety Anchors
76
Grout66
Boa™ Coil Expansion Anchors
76
Boa™ Replacement Coils
76
ACCESSORIES67
Weldplates67
77
DYNABOLT ™ SLEEVE ANCHORS
Backing Rod
67
Dynabolt™ Nut Head
77
Dynabolt™Hex Head
78
construction chemicals
68
Dynabolt™ Post Head
78
Foam68
Acrylic Sealant
68
FASTENING ANCHORS
79
Polyurethane Sealant
68
Flanged AnkaScrew-in Anchors
79
Formwork Sealant
68
Removable Formwork Spikes
79
Sealant Gun Accessories
68
Concrete Nails
79
SEALERS69
Hardeners and Sealers
69
PATCHING, PLASTERING & RENDERING
70
Magic Patch
70
Magic Coat
70
Plaster Products
70
Glowmarkers70
CHEMSET CRACK INJECTION SYSTEMS
Ph 0800 88 22 12
6
71
Trubolt™80
DYNADRILL CARBIDE DRILL BITS & DRILLS
DynaDrill 576
DynaDrill 544
81-82
83
83
CHEMSET ™ 84
Chemset™ Stud Anchors
84
Chemset™ Maxima Spin Capsules
84
Chemset™ Accessories
84
Chemset™ Allthread Rod
85
Chemset™ Couplings
85
DYNASET ™ DROP IN ANCHORS
86
Dynaset™ Drop In Anchors
86
Dynaset™ Setting Tools
86
RIC500A 825ML CARTRIDGE & ACCESSORIES
87
ramset chemical fastening
Chemset™ Injection 101 Series
Chemset A7 Ultra & Accessories
Epcon™ C6 Series & Accessories
Chemset C8 Ultra
88
88
88
88
89
powder fixing - spitfire 75mm
89
CUTTING & GRINDING
Diamond Cutting Blades
Grinding Wheels & Stones
91
91
91
RAMSET TOOLS
Angle Grinders
Laser Level
Vacuum Cleaner
Diamond Drilling
92
93
93
93
94
www.reids.co.nz
Range effective Jan 2011. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/01/11. This supersedes all previous versions.
When is size
not a problem!
When it’s Reid’s new Reidbar 32mm
Threaded Insert of course!
Reidbar Threaded Inserts are designed
for casting into concrete to provide
fixing points for starter bars and
structural members to be anchored
securely to concrete.
Available for 12, 16, 20, 25 and 32mm diameter
Reidbar, Reid’s Threaded Inserts are designed to
“break the bar” when using Reidbar 500E (seismic)
grade micro-alloy, hot-rolled threaded reinforcing bar
manufactured in New Zealand to AS/NZS 4671.
√ Substitutes hooked bars and eliminates bending and re-bending of reinforcing
as per DBH Practice Advisories 1 and 7.
√ Reduces congestion of reinforcing, increases safety and convenience
on site and during transportation of precast
√ Saves valuable time and cost during construction
Reidbar is a proven structural connection system with extensive
testing, analysis and major projects completed both here and in
Australia. Reid offers a superior product to other alternatives.
REIDBAR; TRIED, TESTED AND TRUSTED
7
contents
Anchors10
Swiftlift™Face Lifting Anchors
10
Eye Anchors
11
Edge Lift & Hairpin Anchors
11
Recess Formers
Swiftlift™ Recess Formers
Plastic
Rubber
Steel
Steel Articulated
Edge Lift Recess Formers
11
11 11
12
12
12
Assemblies13
Face Lifting
13
Face Lifting - Puddle-in
13
Edge Lifting
14
Bar Chairs
Crown Spacers
Fast Clip Bar Chairs
Panel Bar Chairs
Slab Bar Chairs
Bar Chair (Misc)
Concrete Bar Chairs
14
14
14
15
15
15
16
Clutches17
Swiftlift™ Clutch17
Plate & Hairpin Clutch
17
Swiftlift™ Remote Release
17
zeus18
Accessories19
Swiftlift™ Anchor Cover Plates
19
Swiftlift™ Shear/Omega Bars
19
Panel Plates
19
Panel Pads
19
Pipe Chains
19
Propping & Accessories
Props Hire
Propping Anchors
Swift Shims
Propping Corner Brackets
Panel Lever Bar
20
20
20
21
21
21
Hire22
Clutches22
Brackets22
Aluminium Boxing - Hire
22
Mistake Plates
22
Post Tensioning Jacks
22
IDAT23
8
Concrete Lifting Ssytems
Concrete lifting systems
9
concrete lifting systems
Face Lifting Anchors
Swiftlift Anchors (Facelifting)
Part No.
Anchor load
group (T)
Length
(mm)
Qty
(per box)
1FA035
1.3
35mm
200
1FA045
1.3
45mm
200
1FA055
1.3
55mm
200
1FA066
1.3
66mm
200
1FA085
1.3
85mm
100
1FA120
1.3
120mm
100
1FA240
1.3
240mm
50
2FA055
2.5
55mm
100
2FA065
2.5
65mm
100
2FA075
2.5
75mm
100
2FA090
2.5
90mm
50
2FA120
2.5
120mm
50
2FA170
2.5
170mm
25
2FA340
2.5
340mm
25
5FA075
5.0
75mm
25
5FA090
5.0
90mm
25
5FA095
5.0
95mm
25
5FA120
5.0
120mm
25
5FA145
5.0
145mm
25
5FA170
5.0
170mm
25
5FA240
5.0
240mm
25
5FA480
5.0
480mm
10
10FA135
10.0
135mm
5
10FA150
10.0
150mm
5
10FA170
10.0
170mm
5
10FA340
10.0
340mm
5
15FA240*
15.0
240mm
1
20FA500
20.0
500mm
2
32FA500*
32.0
500mm
1
32FA700*
32.0
700mm
1
REID Wire Loops
Reid are now able to supply a range of 10 &
20 tonne wire loops commonly used in large
precast beams, specifically engineered for your
project. Wire loops help ease congestion in
reinforcing where it is difficult to use an anchor
and recess former. Please enquire to the REID
engineering team on engineering@reids.co.nz
or 0800 88 22 12.
Stainless Steel 316
1FA066SS
1.3
66mm
200
2FA140SS
2.5
140mm
25
5FA180SS
5.0
180mm
1
* Indent only
¹ Vary spacing to suit application.
Ph 0800 88 22 12
10
new
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Edge Lifing Anchors & Recess Formers
Reid Eye Anchors (Edge Lifting)
Part No.
Anchor load
group (T)
Length
(mm)
Qty
(per box)
1REA050 ¹
1.3
50mm
200
2REA090 ¹
2.5
90mm
100
5REA120 ¹
5.0
120mm
25
10REA175 ²
10.0
175mm
20
20EA250 ²
20.0
250mm
5
1.
new
Edge Lift & Hairpin Anchors
Part No.
Anchor load
group (T)
Length
(mm)
Qty
(per box)
1ELA
1.25
122mm
50
2HPAWF
2.5
264mm
ea
7HPAWF
7.0
340mm
ea
HPACLIP
Clip to hold bar, fits 2.5 & 7.0
tonne anchors
2.
ea
2ELAWF
2.5
100mm
25
7ELAWF
7.0
114mm
10
10ELAWF
10.0
161mm
5
1ELA
Swiftlift Recess Formers - Plastic
ELAWF
HPAWF
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
2PR ¹
Plastic Recess Former
2.5
500
5PR ¹
Plastic Recess Former
5.0
200
2PRFRE ²
Plastic Reduced Recess Former
2.5
150
5PRFRE ²
Plastic Reduced Recess Former
5.0
100
1.
2.
Swiftlift Recess Formers - Rubber
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
1RRFRO
Round Recess Former
1.3
60
2RRFRO
Round Recess Former
2.5
50
5RRFRO
Round Recess Former
5.0
25
10RRFRO
Round Recess Former
10.0
20
20RRFRO
Round Recess Former
20.0
10
32RRFRO
Round Recess Former
32.0
1
11
concrete lifting systems
Recess Formers
Swiftlift™ Recess Formers - Steel
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
1SRFRO ¹
Steel Round Recess Former
1.3
50
2SRFRO ¹
Steel Round Recess Former
2.5
10
5SRFRO ¹
Steel Round Recess Former
5.0
1
1RRI ²
Rubber Ring used with 1SRFRO
1.3
50
2RR ²
Rubber Ring used with 2SRFRO
2.5
100
5RR ²
Rubber Ring used with 5SRFRO
5.0
100
2SRFROB* ³
Steel Bored Recess Former for use with collets
2.5
10
5SRFROB* ³
Steel Bored Recess Former for use with collets
5.0
50
2SRFCC 5
Collets Collar
2.5
20
5SRFCC 5
Collets Collar
5.0
100
2SRFCS
4
Collets Shell Set
2.5
20
5SRFCS 4
Collets Shell Set
5.0
100
2.
4.
3.
5.
* Indent only item
Swiftlift™ Recess Formers - Steel Articulated
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
1SRFROART
Articulated Steel Recess Former
1.3
10
2SRFROART
Articulated Steel Recess Former
2.5
10
5SRFROART
Articulated Steel Recess Former
5.0
10
10.0
10
10SRFROART Articulated Steel Recess Former
* Indent only item
Edge Lift Recess Formers
Part No.
Description
Anchor
load
group (T)
Colour
Qty
(per box)
1ELAPRF
Rubber Recess Former
1.3
orange
50
2ELARRF
Rubber Recess Former
2.5
orange
20
7ELARRF
Rubber Recess Former
7.0
black
20
10ELARRF
Rubber Recess Former
10.0
blue
1
Ph 0800 88 22 12
12
1.
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Assemblies
Face Lifting Assemblies
Part No
Description
Anchor
load
group (T)
Panel
thickness
(mm)
Qty
(per box)
2.5
100mm
10
Swiftlift™ Assemblies - to suit Swiftlift™ Clutch
2PCHAIR100
Face Lift Assembly
2PCHAIR120
Face Lift Assembly
2.5
120mm
10
2PCHAIR150
Face Lift Assembly
2.5
150mm
10
5PCHAIR120
Face Lift Assembly
5.0
120mm
20
20
5PCHAIR150
Face Lift Assembly
5.0
150mm
5PCHAIR175
Face Lift Assembly
5.0
175mm
15
5PCHAIR200
Face Lift Assembly
5.0
200mm
15
Plate Anchor Assemblies - to suit Hairpin Clutch
7PAPCHAIR120
Plate Anchor Assembly
7.0
120mm
20
7PAPCHAIR150
Plate Anchor Assembly
7.0
150mm
20
7PAPCHAIR175* Plate Anchor Assembly
7.0
175mm
20
7PAPCHAIR200* Plate Anchor Assembly
7.0
200mm
20
Ramset Range
FL050175B
Flat Anchor Assembly
5.0
175mm
16
FL050200B
Flat Anchor Assembly
5.0
200mm
16
Minimum
Panel
thickness
(mm)
Qty
(per box)
* 7PAPCHAIR175 & 200. Under product development.
Face Lifting Puddle-In Assemblies
Part No.
Description
Anchor
load
group (T)
Swiftlift™ Puddle-In Assemblies - to suit Swiftlift™ Clutch
2FA090PR
Puddle-In Foot Anchor Assem
2.5
120mm
25
2FA120PR
Puddle-In Foot Anchor Assem
2.5
150mm
25
2FA170PR
Puddle-In Foot Anchor Assem
2.5
200mm
25
5FA095PR
Puddle-In Foot Anchor Assem
5.0
120mm
25
5FA120PR
Puddle-In Foot Anchor Assem
5.0
150mm
25
5FA145PR
Puddle-In Foot Anchor Assem
5.0
175mm
25
5FA170PR
Puddle-In Foot Anchor Assem
5.0
200mm
20
5FA240PR
Puddle-In Foot Anchor Assem
5.0
270mm
15
Plate Anchor Puddle-In Assemblies - to suit Hairpin Clutch
7PA095PRF
Puddle-In Plate Anchor Assem
7.0
120mm
25
7PA125PRF
Puddle-In Plate Anchor Assem
7.0
150mm
25
25
7PA150PRF*
Puddle-In Plate Anchor Assem
7.0
175mm
7PA175PRF*
Puddle-In Plate Anchor Assem
7.0
200mm
ea
7PA200PRF*
Puddle-In Plate Anchor Assem
7.0
225mm
ea
* Under product development.
13
concrete lifting systems
Assemblies & Bar Chairs
Edge Lift Assemblies
Part No.
Description
Anchor
load
group (T)
Panel
thickness
(mm)
Qty
(per box)
2EREA090
Edge Lifting Assembly
2.5
100mm
25
5EREA120
Edge Lifting Assembly
5.0
150mm
25
2VREA090
Vertical Edge Lifting Assembly
2.5
100mm
25
5VREA120
Vertical Edge Lifting Assembly
5.0
150mm
25
2VREA090
2EREA090
Crown Spacers
Suitable for 6-20mm reinforcing.
Part No.
5EREA120
Description
Qty
(per box)
CS20
Chair to hold Reinforcing Bar for cover of 20mm
1000
CS25
Chair to hold Reinforcing Bar for cover of 25mm
700
CS30
Chair to hold Reinforcing Bar for cover of 30mm
600
CS40
Chair to hold Reinforcing Bar for cover of 40mm
500
CS50
Chair to hold Reinforcing Bar for cover of 50mm
400
5VREA120
Fast Clip Bar Chairs - Small Head
For 6mm to 20mm reinforcing.
Part No.
Description
Qty
(per bag)
FCB20
Chair to clip & hold Reo Bar for cover of 20mm
100
FCB25
Chair to clip & hold Reo Bar for cover of 25mm
100
FCB30
Chair to clip & hold Reo Bar for cover of 30mm
100
FCB35
Chair to clip & hold Reo Bar for cover of 35mm
100
FCB40
Chair to clip & hold Reo Bar for cover of 40mm
100
FCB50
Chair to clip & hold Reo Bar for cover of 50mm
100
FCB60
Chair to clip & hold Reo Bar for cover of 60mm
100
FCB65
Chair to clip & hold Reo Bar for cover of 65mm
100
FCB75
Chair to clip & hold Reo Bar for covert of 75mm
100
Fast Clip Bar Chairs - Large head
(Indent only) for larger bar sizes.
Part No.
Description
Qty
(per bag)
FCBP20
Chair to clip & hold Reo Bar to height of 20mm
100
FCBP25
Chair to clip & hold Reo Bar to height of 25mm
100
FCBP30
Chair to clip & hold Reo Bar to height of 30mm
100
FCBP35
Chair to clip & hold Reo Bar to height of 35mm
100
FCBP40
Chair to clip & hold Reo Bar to height of 40mm
100
FCBP50
Chair to clip & hold Reo Bar to height of 50mm
100
FCBP60
Chair to clip & hold Reo Bar to height of 60mm
100
FCBP65
Chair to clip & hold Reo Bar to height of 65mm
100
FCBP75
Chair to clip & hold Reo Bar to height of 75mm
100
Ph 0800 88 22 12
14
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Bar Chairs
Concrete Panel Chairs (Exposed Bottom Surface)
Precast chair for all bar sizes. For use where panel face is exposed.
Part No.
Description
Qty
(per bag/
box)
Chair to hold Reo Bar to height of 25/40mm
100
1
BCPANEL50/60
Chair to hold Reo Bar to height of 50/60mm
100
BCPANEL65/751
Chair to hold Reo Bar to height of 65/75mm
100
CP85/1102
Chair to hold Reo Bar to height of 85/110mm
100
CP120/135
Chair to hold Reo Bar to height of 120/135mm
100
CDR35/7503
Caterpillar Formwork Chair
ea
CP25/401
2
1.
2.
3.
* Indent only item
Concrete Slab Chairs (On Polythene DPC)
For all bar sizes
Part No.
Description
Qty
(per box /
bag)
BC25/40 ¹
Chair to hold Reo Bar to height of 25/40mm
100
BC50/65 ¹
Chair to hold Reo Bar to height of 50/65mm
100
BC75/90 ¹
Chair to hold Reo Bar to height of 75/90mm
100
BC85/100 ¹
Chair to hold Reo Bar to height of 85/100mm
100
BC50/65C2
Chair to hold Reo Bar to height of 50/65mm with clips
100
CS75/902
Chair to hold Reo Bar to height of 75/90mm with clips
100
CS110/125 ³
Chair to hold Reo Bar to height of 110/125mm
100
3.
1.
2.
* Other sizes available on request
Bar Chairs (misc)
Part No.
Descriptiont
Qty
(per box/
bag)
Mesh Chairs
FCM20 ²
Mesh Chair (20mm)
100
FCM25 ²
Mesh Chair (25mm)
100
FCM30 ²
Mesh Chair (30mm)
100
FCM40 ²
Mesh Chair (40mm)
100
FCM50 ²
Mesh Chair (50mm)
100
BSOG120C ³
Bar Chair (120mm)
100
BSOG130C ³
Bar Chair (130mm)
100
BSOG150C ³
Bar Chair (150mm)
100
1.
Bar Chairs
2.
Other Chairs
PS95*
Pile Spacer 95mm OD x 16mm ID - 40mm cover
100
TS17
Trough Spacer 17.5 x 5mm
100
CBN25CR12 ¹ Circular Spacer ( 25mm)
100
3.
* Indent only item
15
concrete lifting systems
Concrete Bar Chairs
Concrete Spacers, manufactured in Germany by Max
Frank and distributed by Reid, assist in maintaining
consistent cover before and during concreting and
do not affect the servicability or durability of the
structural member.
The correct quantity and depth of concrete cover to the reinforcement
is of great importance, both for durability and fire resistance.
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
Two quality types; standard and premium to suit the highest durability
requirements for international standards
Consistent high compressive strength with resistance to tilting
Excellent bond with insitu concrete - no hairline cracks between the spacer
and the concrete
Extremely suitable for impermeable concrete
Excellent chemical and fire resistance
Consistent dimensional tolerances and do not deform under temperature
fluctuations
Quick and easy installation with a number of fixing options available
Has performed in large civil and construction projects throughout Australia
and New Zealand
APPLICATIONS
•
•
•
•
•
•
Construction sites for all applications
Precast Plants - panels and beams
Wastewater Works - spacers for acidic environments
Tunnel Construction - secure fixing in any position including overhanging
reinforcement.
Exposed Concrete - meets the highest architectural requirements (colour
and exposed).
Drinking water applications - certified for use in drinking water applications
Part No.
Description
Qty
(per bag/
box)
AO3512
Concrete Spacer 35mm cover
500
AO5013
Concrete Spacer 50mm cover
250
AO7513
Concrete Spacer 75mm cover
125
AO2071
Concrete Spacer 20/25/30 covers
750
AO3572
Concrete Spacer 35/40/50 covers
250
AO4573
Concrete Spacer 45/55/60 covers
125
Other products are available for specific applications. Refer to the Max Frank catalogue
on the Reid website www.reids.co.nz.
Ph 0800 88 22 12
16
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Clutches
Reid Swiftlift™ Clutches are designed to be used with Reid
Swiflift Anchors and accessories. They are not designed to be
used with other lifting products as there is no guarantee of
compatibility. All Reid products have our logo stamped on them
for ease of identification.
Swiftlift Lifting Clutches to suit Face Lifting
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
1LE
Swiftlift™ Lifting Clutch
1.3
ea
2LE
Swiftlift™ Lifting Clutch
2.5
ea
5LE
Swiftlift™ Lifting Clutch
5.0
ea
10LE
Swiftlift™ Lifting Clutch
10.0
ea
20LE
Swiftlift™ Lifting Clutch
20.0
ea
32LE
Swiftlift™ Lifting Clutch
32.0
ea
1.
Hairpin / Plate Anchor Clutches to suit Edge Lifting
Part No.
Description
Anchor
load
group (T)
Qty
(per box)
1ELALE ¹
Ring Clutch for use with 1ELA Anchor 1.25
ea
2ELALE ²
Ring Clutch
2.5
ea
7ELALE ²
Ring Clutch
7.0
ea
10ELALE ²
Ring Clutch
10.0
ea
2.
Swiftlift Remote Release
Part No.
Description
Load
Group
Qty
(per box)
5LE-R
Remote Release System (includes clutch)
5.0
ea
10LE-R
Remote Release System (includes clutch)
10.0
ea
Department of Labour Code of Practice dictates that clutches be checked by a competent person on a regular basis and a record should be kept of all checks.
Contact Reid™ to arrange annual testing.
17
concrete lifting systems
Zeus
Zeus has been developed as a cost-effective combined
support and lifting bracket for flange hung ‘Double
Tee’ and ‘Ribbed’ precast floor units great than 150mm
deep.
The bracket has been designed in accordance with NZS/AS 1170 and
NZS 3101:2006.
It is the only hanger bracket to date that has been tested to the ‘Jenson
Protocol’ which recognises the combined diaphragm and beam
rotation stresses induced in flooring units under extreme loading.
Zeus is the best practice alternative to the “pigtail loop” detail which is
hard to justify using rational analysis.
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
Secure in plastic hinge zones and incorporates a life safety strap.
Only bracket to have been tested and approved in NZ for seismic loads.
Accommodates building movement such as creep, temperature and concrete
shrinkage.
Two part system with adjustable leg lengths to suit varying sizes of precast
unit depths.
Hot Dipped Galvanised for durability from corrosion.
Easily assembled in the mould and incorporates trimmer bar holes for
reinforcing.
Dual purpose reinforcing and lifting system, lifted with 7ELALE Hairpin clutch
and uses 7ELARRF Recess Former.
Working Load Limit of the anchor is 7 tonne as per the NZ Code of Practice.
Z1 Hanger
Z2 Leg
Z3 Leg
7ELARRF Rubber
Recess Former
Z4 Leg
7ELALE
Hairpin
Clutch
Product Codes
Description
Depth of Rib / Tee
M8 Bolt Code
ZEUSZ1
Z1 Hanger Bracket
>150mm -200mm
BTB0050 (M8 x 50 Galv)
ZEUSZ2
Z2 Leg only
250 - 300mm
ZEUSZ3
Z3 Leg only
350 - 450mm
ZEUSZ4
Z4 Leg only
500 - 600mm
Zeus technical information is available from the Reid website.
Ph 0800 88 22 12
18
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Accessories
Swiftlift Anchor Cover Plates
Designed to cover recess & anchors on precast faces.
Part No.
Description
Anchor
load
group
(T)
Qty
(per box)
2TILTCOVER
Paintable Plastic Covers for Swiflift™ Anchors
2.5
200
5TILTCOVER
Paintable Plastic Covers for Swiflift™ Anchors
5.0
200
Swiftlift Shear/Omega Bars
Provides additional shear capacity to edge lift anchors.
Part No.
Description
Qty
(per box)
1.
1ELASB ¹
1.25T Edge Lift Shear Bar
10
5ELASB ¹
5.0T Edge Lift Shear Bar to suit 150mm Panel
10
SB025Y12 ²*
2.5T Edge Lift Shear Bar
25
SB050Y16 ²*
5.0T Edge Lift Shear Bar
20
2.
* Indent only item
Panel Plates
The use of colour coded plates allows easy identification to determine which precast
elements belong to each job.
Part No.
Description
Qty
(per box)
PANLPLATE BLU
Blue Panel Identification Plate
60
PANLPLATE GRN*
Green Panel Identification Plate
60
PANLPLATE ORG*
Orange Panel Identification Plate
60
PANLPLATE RED
Red Panel Identification Plate
60
PANLPLATE WHTE
White Panel Identification Plate
60
PANLPLATE YELW*
Yellow Panel Identification Plate
60
* Indent only item
Panel Pads
Eliminates staining and other issues associated with curing against precast elements.
Part No.
Description
Qty
(perbox)
100mm
Shortening Hook
Panel Pads 100mm x 100mm
500
1270
mm
PANELPADS
mm
2000
Pipe Chains (5000kg WLL)
Description
Qty
SWIFT PIPE2*
Two leg pipe chain for jointing pipes 1.2m long
ea
Shortening Ring
730m
m
Part No.
UL1
UL2
* Indent only item
19
concrete lifting systems
Propping & Accessories
Props for Hire
Reid™ Props are lightweight high capacity braces for hire, suitable for positioning and stabilising precast elements, retaining walls,
tilt-up panels, block wall steel structures and formwork. The braces conform to NZS3404:1997 design standards and are able to
meet the requirements of the approved code of practice for “The Safe Handling and Erection of Precast Concrete.” Reid™ props are
easy to install, robust, screw adjustable up to 500mm and slotted holes to accommodate bolts with safety stop for easy erection.
Part No.
Prop size
wound out
Safe
Working
load (T)
Duty
Rating
Qty
1.8mp-h
2200mm
5.0
Heavy
ea
2.5mp-h
2900mm
5.0
Heavy
ea
2.5mp-l
2900mm
3.0
Light
ea
3.5mp-h
3900mm
5.0
Heavy
ea
3.5mp-l
3900mm
1.50
Light
ea
5mp-t
8400mm
1.20
Telescopic
ea
5mp
5500mm
3.10
Heavy
ea
6.5mp
6900mm
1.85
Heavy
ea
8mp
8500mm
1.25
Heavy
ea
10mp
10500mm
1.90
Heavy
ea
Propping Anchors (Structural Bolts)
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
18mm
90mm
110mm
20
110mm
100mm
Telescopic Props can be adjusted to any length between 5m to 8.4m with 500mm adjustments.
Heavy Duty Anchor
HDA18/1101 M12
Liebig Heavy Duty Prop Anchors & Component Sets
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
AS15/15
M10
15mm
85mm
105mm
25
AS20/15
M12
Component Sets
20mm
90mm
120mm
10
Re-Kit Expansion Shield and Cone for AS15/15
100
AS20CS
Re-Kit Expansion Shield and Cone for AS20/15
50
Ph 0800 88 22 12
20
2.
AS15CS
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Concrete Lifting Ssytems
concrete lifting systems
Propping Accessories
Propping Corner Brackets
Part No.
Description
Qty
(per ea)
PCB
Support Brackets for Panels while Propping
ea
Panel Lever Bar
Part No.
Description
Qty
SWIFT LEVR
Panel Lever
ea
Swift Shims
Part No.
Thickness
Colour
Size
Qty
(per box)
SHIM01 ¹
1mm
Red
100x90x1
100
SHIM03 ¹
3mm
Blue
100x90x3
100
SHIM06 ¹
6mm
Green
100x90x6
100
SHIM10 ¹
10mm
Black
100x90x10
100
SHIM01L ²
1mm
100x150x1
100
SHIM02L ²
2mm
100x150x2
200
SHIM03L ²
3mm
100x150x3
100
SHIM05L ²
5mm
100x150x5
100
SHIM10L ²
10mm
100x150x10
40
SHIM15L ²
15mm
100x150x15
40
SHIM20L ²
20mm
100x150x20
30
1.
2.
Other products that may be of interest:
Fillet Pg 28
Flat Square Washers Pg 29
Noxcrete Bondbreakers Pg 31
21
concrete lifting systems
Hire Products
Clutches - Hire
Part No.
Description
Qty
(per ea)
1LE
1.3 Tonne Swiftlift Clutch
Hire only
1ELALE
1.3 Tonne Hairpin Clutch
Hire only
2LE
2.5 Tonne Swiftlift Clutch
Hire only
2ELALE
2.5 Tonne Hairpin Clutch
Hire only
5LE
5 Tonne Swiftlift Clutch
Hire only
5LE-R
5 Tonne Remote Release Clutch
Hire only
7ELALE
7 Tonne Hairpin Clutch
Hire only
10LE
10 Tonne Swiftlift Clutch
Hire only
10ELALE
10 Tonne Hairpin Clutch
Hire only
20LE
20 Tonne Swiftlift Clutch
Hire only
32LE
32 Tonne Swiftlift Clutch
Hire only
Brackets - Hire
Part No.
Description
Qty
(per ea)
PCB-HIRE
Support Brackets for Panels while Propping
Hire only
SCB-HIRE
Stack Cast Bracket
Hire only
Aluminium Boxing - Hire
Aluminium boxing is available for hire from Reid branches.
Part No.
Description
Qty
(per
length)
1MB-S
1m Length Aluminium Boxing
1
2MB-S
2m Length Aluminium Boxing
1
3MB-S
3m Length Aluminium Boxing
1
4MB-S
4m Length Aluminium Boxing
1
5MB-S
5m Length Aluminium Boxing
1
6MB-S
6m Length Aluminium Boxing
1
Aluminium boxing is available in various lengths for hire on site
Mistake Plates - Hire
Part No.
Description
Qty
(per ea)
MPLATE
Mistake Plate for Lifting
Hire only
Post Tensioning Jack for Reidbar - Hire
Part No.
Description
JACK20
Post Tensioning Jack for Reidbar / Rockbolting
& Stressing Strand
Ph 0800 88 22 12
22
Qty
(per ea)
Hire only
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
Features & Benefits
Find out why IDAT is the only CAD package worth considering for precast.
√
Support
√
Database
√
Customisation
√
Autocad Interface
Local support from Reid in
your time zone and language
Set up IDAT the way
you require it
Keep track of your
projects materials
If you can use Autocad we
can train you in under a few days
Now your business can profit from a partnership between Reid Construction Systems
and IDAT of Germany that will revolutionise your approach to precast concrete.
PH: 0800 88 22 12
Develop your Business Solution today. Ask for a Free Demonstration.
Precast
Design a
nd
Detailin
g
From Th
e Name Softwar
s you Kn
e!
ow and
Tru
st!
www.idat.com.au
www.reids.co.nz
23
contents
SwiftForm™ 26
Aluminium Extruded Profile Section 26
End Caps 26
G-Clamp26
Extension Arms 26
Magnet27
Angle Bracket for Stack Casting 27
ReidForm™
Edgeform LVL 28
Extruded Fillet 28
Brackets28
Fillet 28
Fillet Cutter 28
Formwork Sealant 28
Double Sided Tape 28
GENERAL FORM RELEASE AGENTS 29
SwiftRelease General Release Agent 29
PINZ29
Retarders29
Retarder Paper 29
Removable Formwork Spikes 29
Insitu Formwork 30
Reidbar™ Wingnuts 30
Reidbar™ Formwork Cone, Conduit, Washers & Grommets 30
Nox-Crete
31
FormCoat E Form Release Agent 31
Bio-Nox Biodegradable Form Release 31
K-Concentrate31
Silcoseal Select BondBreaker 31
Formguard TJ 31
Sprayers & Tips 33
Accessories33
24
Formwork Ssytems
formwork systems
25
FORMWORK systems
SWIFTFORM
Aluminium Extruded Profile Section
Part No.
Description
Qty
(per length)
Qty
(per
Bundle)
SWREIDFRM30
30mm Extruded Profile to suit Flexus Floors
6.04m
10
SWREIDFRM100E-S
100mm Extruded Profile Section with Molded
in 5mm radius.
6.04m
10
SWREIDFRM120E-S
120mm Extruded Profile Section with Molded 5mm
radius.
6.04m
10
SWREIDFRM125E
125mm Extruded Profile Section with Molded
in Fillet with 15mm Fillet
6.04m
10
SWREIDFRM150E
150mm Extruded Profile Section with Molded
in Fillet with 15mm Fillet
6.04m
10
SWREIDFRM150E-S
150mm Extruded Profile Section with Molded in 5mm
6.04m
radius.
10
SWREIDFRM200E
200mm Extruded Profile Section with Molded
in Fillet with 15mm Fillet
10
6.04m
End Cap
Part No.
Description
Qty
(per box)
SWFRMPLUG125 End Cap piece for 125 Extruded Profile
60
SWFRMPLUG150 End Cap piece for 150 Extruded Profile
30
Extension Arms for G-Clamp
Part No.
Description
Qty
(per box)
SWEXTARM500
1-500mm Extension Arm
ea
SWEXTARM1000
2-1000mm Extension Arm
ea
SWEXTARM1500
3-1500mm Extension Arm
ea
G-Clamp
Part No.
Description
Qty
(per box)
SWFORMCLP
Clamp with Screw
ea
Ph 0800 88 22 12
26
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FORMWORK systems
Magnet
Description
Qty
(per box)
SW3000MAG
Magnetic Clamp c/w Bridge 1300kg holding force
ea
KPB2000-PTOOL
Magnet Clamp Release Lever
ea
Formwork Systems
Part No.
SWIFTFORM
Accessories
Part No.
Description
Qty
(per box)
SWREIDANGLEBKT
Suitable for stack casting of Aluminium Formwork ea
SWREIDANGLEBKT
lightweight
SwiftForm™ aluminium
formwork is significantly lighter
than traditional steel formwork,
improving OH&S and making it
much safer to use.
easy to use
The Reid™ SwiftForm™ system
is quick and easy to use.
Formwork is easily cut to size
on site. Magnetic clamps are
easily located on the rear of the
sideform and can be quickly
engaged and or disengaged to
allow for positional adjustment.
accurate
SwiftForm™ End Caps can be
easily attached or removed
and are designed to perfectly
fit the profile of the aluminium
sideform, enabling fast and
accurate set up of external
corners.
versatile
The SwiftForm™ range of
accessories including Internal
corners, Clamping Extenstions
Arms and Angle Brackets
provides unparalleled flexibility
in design of both standard
and non-standard panel
configurations.
27
FORMWORK systems
Accessories
Edgeform LVL
Part No.
Description
Lineal
metres per
pack
Recomm.
support
spacing
Qty
(per length)
Qty
(per
bundle)
EFLVL120
120mm x 36mm x 6m lengths
270m
1300mm
6m
40
EFLVL146
146mm x 36mm x 6m lengths
240m
1250mm
6m
32
EFLVL170
170mm x 36mm x 6m lengths
210m
1200mm
6m
32
EFLVL200
200mm x 36 mm x 6m lengths
180m
1150mm
6m
24
EFLVL240
240mm x 36mm x 6m lengths
150m
1100mm
6m
24
Extruded Fillet
Part No.
Description
SWFRMLVLCAP
Extruded Fillet Radius Designed
to Match LVL Sections (Epoxy
Finish)
Qty
(per
length)
Qty
(per bundle)
6.04m
10
Fillet & Accessories
Part No.
Description
Qty
(sold as)
Qty
(per
bundle)
Tail Fillet 12 & 15mm
12mm
12mm Fillet & Mock
26mm
FILLET12T
Fillet with Tail 12mm (3m long) Grey (Solid)
length
25
FILLET12S
Solid Fillet 12mm (3m long) Orange
length
25
MOCK12
Mock Joint 12mm (4m long) Orange
length
10
FILLET15T
Fillet with Tail 15mm (3m long) Grey (Hollow)
length
40
FILLET15S
Solid Fillet 15mm (3m Long) White
length
25
MOCK15
Mock Joint 15mm (4m long) White
length
10
15mm
15mm
15mm
length
25
MOCKCIVIL
Solid Mock suits Civil Insitu pours (4m long)
length
10
PFC
Fillet Cutter
ea
FMSLG300
Sealant Form Seal Clear 300ml Cartridge
ea
FMSLG600
Sealant Form Seal Clear 600ml Sausage
ea
DSTAPE36
Double Sided Tape 36mm x 25m
ea
17mm
Mock 12, 15 & Civil
15mm
15mm
FILLETCIVIL19 Solid Fillet 19mm suits Civil Insitu pours (3m long)
24mm
21mm
12mm
12mm
Fillet & Mock suitable for Civil Insitu
Accessories
28
37mm
Fillet 12, 15 & Civil
15mm Fillet & Mock
Ph 0800 88 22 12
15mm
38mm
15mm
12mm
40mm
15mm
17mm
12 per box
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
50mm
17mm
Formwork Systems
FORMWORK systems
SwiftRelease - General Form Release Agents
Oil based products for timber and steel.
Part No.
Description
Qty
(per
drum)
SWRL20S
SwiftRelease - Timber & Steel
20L
SWRL20N
PINZ N - Timber
20L
SWRL20KS
PINZ KS - Steel (Precast Quality Finish)
20L
SWRL208S
SwiftRelease - Timber & Steel
210L
SWRL208N
PINZ N - Timber
210L
SWRL208KS
PINZ KS - Steel (Precast Quality Finish)
210L
Retarder Paper
For producing exposed aggregate.
Part No.
Description
RPWBGROLL
Retard Paper Green 1.2 x 100m roll
Aggregate
Size
4-8mm
Qty
(per box)
ea
Removable Formwork Spikes
Part No.
Description
Spike
Length
Qty
(per box)
SDFW0570
Removable Formwork Spike 5x70
70mm
100
SDFW0675
Removable Formwork Spike 6x75
75mm
100
new
29
FORMWORK systems
Insitu Formwork
Reidbar Wingnut
Part No.
Bar
dia
Overall
length
Overall
dia
Qty
(per box)
RB12WN
RB12
40mm
58mm
100
RBA16WN
RB16
51mm
98mm
33
RB20WN
RB20
50mm
120mm
20
Reidbar Watertight Coupler
This product is a FORMWORK ACCESSORY and it is only designed to develop the BAR YIELD STRENGTH.
Part No.
Bar
dia
Overall
length
Overall
dia
Qty
(per box)
RB12CW
RB12
100mm
25mm
50
RBA16CW
RB16t
110mm
32mm
48
RB20CW
RB20
145mm
35mm
20
* Indent only item. There is a lead time on all watertight couplers. Please check with sales.
Note the new design of this product.
Formwork Cone
Reidbar Formwork Cone, Conduit & Washers
Part No.
Description
Qty
RB16FC
Formwork Cone for 16mm Reidbar™
500
RB20FC
Formwork Cone for 20mm Reidbar™
500
RB16FCOND
Plastic Conduit 3m lengths 20mm I.D
3m
RB20FCOND
Plastic Conduit 3m lengths 24mm I.D
3m
12FSW
M12 x 50 x 3mm Galv Flat Washer
500
16FSW80
M16 x 80 x 6mm Galv Square Washer
250
16FSW
M16 x 50 x 5mm Galv Flat Square Washer
300
20FSW
M20 x 50 x 5mm Galv Flat Square Washer
250
24FSW
M24 x 50 x 5mm Galv Flat Square Washer
100
RPLATE
150 x 100 x 6mm Plate with 24mm hole
16
RPlate
Spray Nox-Crete Bio-nox
Conduit
Reidbar Reinforcing Grommet
RPLATE
Part No.
To Suit Bar Diameter
Qty
(per box)
RG12
Reinforcing Grommet for RB12 Bar
100
RG16
Reinforcing Grommet for RB16 Bar
100
RGB
Reinforcing Grommet Blank
100
RB12WN
* Indent only item
RB12 Reidbar
Ph 0800 88 22 12
30
RPLATE
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FORMWORK systems
Nox-crete™
Form Release Agents
Waterbased form release agents for steel/formply to concrete applications.
Description
Qty
(per
drum)
Formwork Systems
Part No.
FormCoat E - Water Based
NOXFORM-E20PRE
Water Based Form Release
19L
NOXFORM-E208PRE
Water Based Form Release
208L
Bio-Nox - 100% Biodegradble, Water Based
NOXBIO20
100% Biodegradable Form Release
19L
NOXBIO208
100% Biodegradable Form Release
208L
Bondbreakers
Water based curing agent and bondbreaker for concrete to concrete applications.
Part No.
Description
Qty
(per
drum)
NOXSILCOSEL20
Waterbased Bondbreaker
19L
NOXSILCOSEL208
Waterbased Bondbreaker
208L
Concrete Removers - K Concentrate
Part No.
Description
Qty
(per
drum)
NOXCONC-K19
Hardened Concrete Remover
19L
Form Protection - Formguard TJ
Part No.
Description
Qty
(per
drum)
NOXFRMGRD20L
Form Rust Inhibitor
19L
31
FORMWORK systems
Nox-crete™
BIO-NOX
Use On: Aluminium Forms; Plywood Faced Handset Forms; All Overlaid Plywood
Forms; Steel Forms; Plastic & Rubber Form Liners
•
100% biodegradable.
•
Water based formulation.
•
Does not oxidize or turn tacky. Produces smooth uniformly white
architectural concrete surfaces with no staining and substantially fewer
surface defects.
•
Can be used with aggressive stripping schedules where forms are stripped
and repoured within 24 hours
FormCoat E
Use On: Plywood Faced Handset Forms; All Overlaid Plywood Forms; Steel
Forms; Plastic Form Liners
•
Biodegradable
•
Exceptional performance on non-overlaid plywood, dimensional lumber and
MDO plywood.
•
Extends the life of wood forms by reducing the absorption of destructive
akaline bleed water.
•
Produces smooth, uniformly white concrete surfaces with no staining and
reduced surface voids (bugholes).
SILCOSEAL SELECT
Use On: Tilt-up Concrete Panels
•
New generation, chemically active cure and bondbreaker.
•
Produces exceptional wall panel surface appearance
•
Provides crisp positive release from casting beds
•
Excellent resistance to rain wash-off once dry.
•
Superior UV resistance allows longer periods between application and
concrete pours.
Bondbreaker Differences
Silcoseal Select
Competitor Bondbreaker
When applied correctly, Silcoseal Select will not stain the panels. It’s new generation water based formula provides a uniform appearance in comparison to
other bondbreakers.
Ph 0800 88 22 12
32
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FORMWORK systems
Nox-Crete Quick Guide
FormCoat E
Form Release Agent
Steel, rubber, plastic,
overlaid plywood,
closed cell foams
Suitable for use on
Steel, all plywood,
plastic, fibreglass,
rubber
Silcoseal Select
Silcoseal 77
Concrete to
Concrete
Bondbreaker
Concrete to Concrete
Bondbreaker
Concrete
Formwork Systems
Bio-Nox
Concrete
(Solvent based)
Coverage (m2/lt)
50 - 60
25 - 75
5-10
5 - 10
Dry Time @ 2o C
1/2 hour
1/2 hour
1/2 - 3 hour
1/2 - 3 hour
Application Method
Spray
Spray
Spray, roller
Spray, roller
Spray Tip Required
NOXTIP80005
NOXTIP800067
NOXTIP8004
NOXTIP8004
Biodegradeable
100%
Yes
Yes
No
Odour
No
Minimal
Minimal
Mild
Flammable
No
No
No
Yes
Trafficable when dry
Partly
Yes
Yes
Yes
Non-slippery when dry
No
Yes
Yes
Yes
Rain resistant when dry
Yes
Yes
Yes
Yes
Clean-up
Water
Water
Water
Sugar Soap
Sprayers & Tips
Part No.
Description
Qty
(per box)
NOXPERFECT
Reid Stainless Steel Sprayer
ea
NOXTIP8001
Sprayer Tip for Formguard TJ
ea
NOXTIP8004
Sprayer Tip for Silcoseal Select
ea
NOXTIP80067
Sprayer Tip for FormCoat E
ea
NOXTIP80005
Sprayer Tip for Bionox
ea
NoxCrete Accessories
NOXMIXER
Hand agitator for 208 Litre Drums
ea
NOXPUMP
Pump for removing NoxCrete Products from 208L Drums
ea
NOXROLLER
Roller for Applying FormCoat E & Silcoseal
ea
NOXROLL
Replacement Roller
ea
NOXMIXER
NOXROLLER
NOXPERFECT
33
contents
reidbar™ components
Reidbar™ Couplers
Reidbar™ Nuts
Reidbar™ Foot Plates
Reidbar™ Flange Nuts
Reidbar™ Grout Sleeves
Reidbar™ Grout Sleeve (setting hardware) Grout
Reidbar™ Wing Nuts
Reidbar™ Threaded Inserts
Reidbar™ Reduced Threaded Insert
Reidbar™ Threaded Insert Chair
Reidbar™ Plastic Nail Plates
Reinforcing Grommets
36
36
36
36
37
37
37
37
38
38
38
38
38
reid™ metric components
Reid™ Threaded Insert Metric (TIM)
Reid™ Threaded Insert Metric Stainless Steel (TCM)
Reid™ Plastic Nail Plates Metric
Glue-on Nail Plate Metric
Locator Caps for Threaded Inserts
39
39
39
39
39
39
rockbolting/ground reinforcing
Reidbar™ Domed Base Plates
Reidbar™ Spherical Washers
Reidbar™ Spider Centralisers
Kwik-Zip Centraliser
Safety Protective Caps
40
40
40
40
40
40
CORROSION PROTECTION
Noxyde Water Based Elastomeric Membrane
41
41
reidbrace ™ 42
dowels & bearing strip
McDowel Bearing Strip
McDowel Dowel Sleeve Stock
43
43
43
Post-tensioning
Post-Tensioning Kits
Post-Tensioning Strand
44
44
Reidbar Components
reidbar components
REIDBAR COMPONENTS
Reidbar™ Components
Reidbar Coupler
Threaded coupler for joining sections of Reidbar™
Part No.
Bar
dia. Ø
Overall
length
Hex
A/F
RB12
90mm
25mm
reidbar
components
RB12C
Qty
(per box)
100
RBA16C
RB16
102mm
30mm
60
RB20C
RB20
116mm
36mm
32
RB25C
RB25
180mm
45mm
20
RB32C
RB32
210mm
57mm
10
RB12CG
RB12
90mm
25mm
100
RBA16CG
RB16
102mm
30mm
60
RB20CG
RB20
116mm
36mm
32
RB25CG
RB25
180mm
45mm
20
RB32CG
RB32
210mm
57mm
10
Galvanised
Reidbar Nut
Part No.
Bar
dia. Ø
Overall
length
Hex
A/F
Qty
(per box)
RB12N
RB12
40mm
25mm
210
RBA16N
RB16
45mm
30mm
100
RB20N
RB20
50mm
36mm
82
RB25N
RB25
65mm
46mm
36
RB32N
RB32
82mm
55mm
18
RB12NG
RB12
40mm
25mm
210
RBA16NG
RB16
45mm
30mm
100
RB20NG
RB20
50mm
36mm
82
RB25NG
RB25
65mm
46mm
36
RB32NG
RB32
82mm
55mm
18
Galvanised
Half Nuts Galvanised
RB12NHG
RB12
18mm
25mm
420
RBA16NHG
RB16
20mm
30mm
200
RB20NHG
RB20
23mm
36mm
164
RB25NHG
RB25
31mm
46mm
72
RB32NHG
RB32
39mm
55mm
36
Reidbar Foot Plate
All Reidbar Footplates have a triangular flange or base for easy identification in
comparison to the round foot of the Reidbar Flange Nut.
Part No.
Bar
dia. Ø
Overall
length
Hex
A/F
Qty
(per box)
RB12FP
RB12
40mm
22mm
100
RBA16FP
RB16
51mm
30mm
60
RB12FPG
RB12
40mm
25mm
100
RBA16FPG
RB16
51mm
30mm
60
Reidbar Foot Plates have a stop in the end so that they can not be
continuously threaded onto the bar.
Galvanised
Ph 0800 88 22 12
36
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
REIDBAR COMPONENTS
Reidbar™ Components
Reidbar Flange Nut
Reidbar™ Flange Nuts have a continuous thread.
A RB12WN is used instead of a 12mm Flange Nut.
Part No.
Bar
dia. Ø
Should you require a stop in the end for the larger sizes,
please refer to the Reidbar Design Guide.
Overall
length
Hex
A/F
Qty
(per box)
RB12WN
RB12
40mm
22mm
100
RBA16FN
RB16
51mm
30mm
33
RB20FN
RB20
50mm
36mm
30
RB25FN
RB25
70mm
46mm
16
RB32FN
RB32
95mm
57mm
15
RBA16FNG
RB16
51mm
30mm
60
RB20FNG
RB20
50mm
36mm
30
RB25FNG
RB25
70mm
46mm
16
RB32FNG
RB32
95mm
57mm
7
Reidbar Components
Galvanised
Reidbar Wingnut
Part No.
Bar
dia
Overall
length
Overall
dia
Qty
(per box)
RB12WN
RB12
40mm
58mm
100
RBA16WN
RB16
51mm
98mm
33
RB20WN
RB20
50mm
120mm
20
Reidbar Grout Sleeve
For use with threaded Reidbar.
Part No.
Bar
dia. Ø
Overall
length
(mm)
Body
OD
(mm)
Grout
Volume
(ml)
Embed.
depth
(min)
Grout
hole
dia.
Qty
(per
box)
RB12GS
RB12
200mm
46-58mm
200
110mm
21mm
9
RBA16GS
RB16
240mm
50mm
200
140mm
21mm
6
RB20GS
RB20
290mm
60mm
350
174mm
21mm
4
RB25GS
RB25
360mm
70mm
550
234mm
21mm
5
RB32GS
RB32
445mm
75mm
746
280mm
26mm
4
REIDBAR GROUT SLEEVES SHOULD BE
USED WITH A HIGH STRENGTH NONSHRINK GROUT 65MPa.
Reidbar Grout Sleeve - setting hardware
Part No.
Overall
length
Thread
dia. Ø
Rubber Plug
OD
Qty
(per box)
RB12GSSET
80mm
M8
36-48mm
1
RB16GSSET
80mm
M8
32mm
1
RB20GSSET
80mm
M8
40mm
1
RB25GSSET
80mm
M8
48mm
1
RB32GSSET
80mm
M8
55mm
1
37
REIDBAR COMPONENTS
Reidbar™ Threaded Inserts
Reidbar Threaded Inserts
Designed for casting into concrete and provide fixing points for attachments of starter
bars and structural members to be bolted directly to the concrete structure.
Part No.
Bar
dia. Ø
Overall
length
Foot
dia.
Qty
(per box)
RB12TI
RB12
100mm
38mm
75
RBA16TI
RB16
118mm
50mm
30
RB20TI
RB20
148mm
64mm
25
RB25TI
RB25
191mm
80mm
10
RB32TI
RB32
210mm
101mm
1
RB12TIG
RB12
100mm
38mm
75
RBA16TIG
RB16
118mm
50mm
30
RB20TIG
RB20
148mm
64mm
25
RB25TIG
RB25
191mm
80mm
10
RB32TIG
RB32
210mm
101mm
1
reidbar components
Galvanised
new
Reid are pleased to add
the 32mm size Reidbar
Threaded Insert to
our range.
Reidbar Reduced Threaded Insert
Designed for use in thin, specialty panels under 100mm thick.
Part No.
Bar
dia. Ø
Overall
length
Foot
dia.
Qty
(per box)
RB12RI
RB12
78mm
38.75mm
60
Reidbar Threaded Insert Chair
Part No.
Description
Qty
(per box)
TICHAIR
Threaded Insert Chair
90
Reidbar Plastic Nail Plates
Part No.
Description
Qty
(per box)
NP12RB
Nail Plate to suit Reidbar™ RB12 Threaded Inserts 100
NP16RB
Nail Plate to suit Reidbar™ RB16 Threaded Inserts 100
NP20RB
Nail Plate to suit Reidbar™ RB20 Threaded Inserts 100
NP25RB
Nail Plate to suit Reidbar™ RB25 Threaded Inserts 100
NP32RB
Nail Plate to suit Reidbar™ RB32 Threaded Inserts 100
NEW SIZE!
32mm Nail Plate is a welcome addition to
the Reidbar range of accessories.
Reinforcing Grommet
Part No.
Inside
dia. Ø
Outside
dia. Ø
Bar
dia. Ø
Qty
(per box)
RG12*
33mm
67mm
RB12
100
RG16*
33mm
67mm
RB16
100
RGB
33mm
67mm
Various
100
* Indent only
Ph 0800 88 22 12
38
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
REIDBAR COMPONENTS
Metric THREADED INSERTS
Reid Threaded Insert Metric (TIM or TCM)
Other sizes of Metric Threaded Inserts are available on request.
Note: This product may be called TCM’s.
Part No.
Thread
size
Cross Hole
diameter
Thread
depth
Anchor
Length
Reid TIM
Qty
(per box)
Zinc Passivated TIMS
TIM16X75
M16
11/11.6mm
35mm
75mm
25
TIM20X75
M20
15/15.5mm
32/33mm
75mm
50
TIM10X40G
M10
8.8/9.2mm
15mm
40mm
100
TIM12X50G
M12
9.1/9.5mm
20mm
50mm
100
TIM16X75G
M16
11/11.6mm
35mm
75mm
25
TIM20X75G
M20
15/15.5mm
32/33mm
75mm
50
TIM20x120G
M20
47mm
120mm
20
TIM24X100G
M24
45mm
90mm
20
20/20.5mm
Reidbar Components
Galvanised TIMS
NEW RANGE!
316 Stainless Steel TCM’S with Elephant Foot
TCM10X45SS
M10
8.4mm
20mm
45mm
ea
TCM12X55SS
M12
8.4mm
25mm
55mm
ea
TCM16X70SS
M16
11.0mm
32mm
70mm
ea
TCM20X95SS*
M20
11.0mm
35mm
95mm
ea
Reid have released a
range of Stainless Steel
Inserts with an Elephant
Foot. Look for the new
Technical Catalogue on
the website.
* Indent only
SS TCM
Reid Metric Plastic Nail Plates
Part No.
Description
Qty
(per box)
NP12
Nail Plate to suit Reid™ 12mm Metric Threaded Inserts
100
NP16
Nail Plate to suit Reid™ 16mm Metric Threaded Inserts
100
NP20
Nail Plate to suit Reid™ 20mm Metric Threaded Inserts
100
NP24
Nail Plate to suit Reid™ 24mm Metric Threaded Inserts
100
Glue-on Nail Metric Plate
Part No.
Description
Qty
(per box)
GP12
Glue-on Nail Plate 12mm Red
100
GP16
Glue-on Nail Plate 16mm Green
100
GP20
Glue-on Nail Plate 20mm Blue
100
GP24
Glue-on Nial Plate 24mm Yellow
100
GPTAB
Double-sided Adhesive Tab
100
Locator Caps for Threaded Inserts
Part No.
Description
Qty
(per box)
FM12L
Threaded Insert Locator Caps 12mm
100
FM16L
Threaded Insert Locator Caps 16mm
100
FM20L
Threaded Insert Locator Caps 20mm
100
39
REIDBAR COMPONENTS
Rockbolting & SOIL NAILING
Reidbar Domed Base Plates & Spherical Washers
Part No.
Description
RPlate
Qty
(per box)
reidbar
150 xcomponents
100 x 6mm Plate c/w 24mm hole
RPLATE
16
BPLATE20100
100 x 100 x 6.3mm Domed Base Plate
1
BPLATE32150
150 x 150 x 10mm Domed Base Plate
1
Galvanised
Washer
BPLATE20100G
100 x 100 x 6.3mm Galv Domed Base Plate
1
BPLATE32150G
150 x 150 x 10mm Galv Domed Base Plate
1
RB20SWG
Spherical Washer (used for RB16 & RB20)
100
RB32SWG
Spherical Washer (used for RB25 & RB32)
50
Base Plate
Reidbar Spider Centraliser
Part No.
Bar size
(mm)
O/A dia.
(mm)
STD hole
size (mm)
Nom.
spacing ¹
(mm)
Qty
(per box)
RB25/32/150CEN*
25/32mm
137mm
150mm
1500mm
100
RB25/32/130CEN
25/32mm
117mm
130mm
1500mm
100
RB25/32/100CEN
25/32mm
90mm
100mm
1500mm
20
RB20/100CEN*
20mm
90mm
100mm
1500mm
100
* Indent only
¹ Vary spacing to suit application.
Kwik-Zip GT Centraliser
kWIK-zip bows come as an each item. They are assembled in
accordance with bar size (pieces per Kwik-zip) and hole diameter
size. Centralisers should be used approx every 1.5-2m depending
on length of hole and weight of bar.
Bow heights are 20, 30, 40mm.
For further information contact Reid.
Suitable for Rock Bolts, Soil Nails and Small Diameter Bar.
Part No.
Bar size
(mm) OD over
thread
Pieces per
Centraliser
per location
Qty
(per box)
RBKZ-GT20
18-29mm
2
100
RBKZ-GT30
29-46mm
3
100
RBKZ-GT40
47-65mm
4
100
* Indent only
Examples of how to calculate centraliser bow height:
• 100mm hole with a 20mm bar = 80mm void. 80 divided by 2 (pieces per centraliser as per table) = 40mm bow height
• 150mm hole with 32mm bar = 118mm void. 118 divided by 2 = 59mm - round down to 40mm bow height.
Safety Protective Caps
Part No.
Description
Qty
(per box)
RODKNOB ¹
Fits all rebar - plain, deformed 12-25mm
100
STG1220
Safe T Guard 12-20mm
ea
2
Ph 0800 88 22 12
40
1.
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
2.
REIDBAR COMPONENTS
Corrosion Protection
Noxyde Water Based Elastomeric Membrane (NEW)
Part No.
Description
Size
Qty
(per box)
RBNOXB1
Noxyde Paint On Membrance - Black
1kg
ea
RBNOXB20*
Noxyde Paint On Membrance - Black
20kg
ea
RBNOXG1
Noxyde Paint On Membrance - Mist Grey
1kg
ea
RBNOXG20*
Noxyde Paint On Membrance - Mist Grey
20kg
ea
Noxydizing has excellent elasticity (>200%) for protection against cracking and
peeling on metal surfaces subject to expansion, contraction, movement and
mechanical impact. Ideal for cables, bolts, nuts, cladding and reinforcing.
ADHESION
For further details refer to product data sheets. (www.ro-m.com)
Your distributor:
Even when the membrane is cut, its incredible adhesion will prevent any type of
undercutting by corrosion and therefore corrosion is not able to spread.
WATERPROOFING
Noxydizing is impermeable for water. This strength and its excellent elasticity
make it the best solution for the protection and waterproofing of metal roofs and
cladding.
Rust-Oleum Netherlands B.V.
P.O. Box 138
4700 AC Roosendaal
The Netherlands
T: +31 (0) 165 593 636
F: +31 (0) 165 593 600
info.nl@ro-m.com
www.ro-m.com
Rust-Oleum UK Ltd.
Unit 5D Alexandra Way,
Ashchurch B. Centre
Tewkesbury GL20 8 NB
United Kingdom
T: +44 (0) 1684 27 33 33
F: +44 (0) 1684 27 33 31
info.uk@ro-m.com
www.ro-m.com
Rust-Oleum France S.A.
11, rue Jules Verne - B.P. 39
95322 St-Leu-La-Forêt Cedex
France
T: +33 (0) 130 40 00 44
F: +33 (0) 130 40 99 80
info.fr@ro-m.com
www.ro-m.com
Corrosion usually begins on outside edges where there is minimal film build.
Testing proofs a 100% edge coverage at a round corner and still a 41% coverage at
a 90 degree corner.
Rust-Oleum Mathys Italia s.r.l.
Via Mazzetta, 36
13856 Vigliano Biellese BI
Italy
T: +39 015 81 22 160
F: +39 015 81 22 161
info.it@ro-m.com
www.ro-m.com
N.V. Martin Mathys S.A.
Kolenbergstraat 23
3545 Zelem
Belgium
T: +32 (0) 13 460 200
F: +32 (0) 13 460 201
info.be@ro-m.com
www.ro-m.com
NOXYDIZING
TM
REVOLUTION IN
CORROSION CONTROL
MFNOXY.GB - 09.04
EXCELLENT EDGE COVERAGE
REVOLUTION IN
CORROSION CONTROL
ELASTICITY
Reidbar Components
Noxyde is a water based elastomeric membrane which provides corrosion protection and waterproofing. It
is recommended for use on Reidbar and Reidbrace applications. For more information on the use of this
product and suitable applications refer to the Reid website www.reids.co.nz.
41
REIDBAR COMPONENTS
Reidbrace BRACING SYSTEM
Reidbrace is a galvanised product.
Refer to Reidbar™ Design Manual for detailed information.
Description
Pin hole
reidbar
components
dia. Ø
Part No.
Qty
(per box)
Sets
RBRACE12-SET
Reidbrace Set RB12
17mm
ea
RBRACE16-SET
Reidbrace Set RB16
17mm
ea
RBRACE20-SET
Reidbrace Set RB20
21mm
ea
RBRACE25-SET
Reidbrace Set RB25
31mm
ea
RBRACE32-SET
Reidbrace Set RB32
31mm
ea
RBRACE12/16
For use with RB12/16
17mm
ea
RBRACE20
For use with RB20
21mm
ea
RBRACE25
For use with RB25
31mm
ea
RBRACE32
For use with RB32
31mm
ea
RBRACE12-END
For use with RB12
17mm
ea
RBRACE16-END
For use with RB16
17mm
ea
RBRACE20-END
For use with RB20
21mm
ea
RBRACE25-END
For use with RB25
31mm
ea
RBRACE32-END
For use with RB32
31mm
ea
Banana End
Ends
Reidbrace has many innovative applications as the banana and the end can be used in separate installations with out the other.
For values on the Reidbrace, refer to the Reidbar Design Guide available from the web.
Installation special caution:
The Reidbrace must be centralised on the
bracket to equalise central loading forces.
Ph 0800 88 22 12
42
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
REIDBAR COMPONENTS
Dowels
DID YOU KNOW?
Bearing strips are designed to be placed between precast concrete floor slabs
and a supporting wall or beam. The Bearing Strips then allow the slabs to be slid into
place without incurring damage to either the slab or the supporting wall or beam.
Part No.
Description
Length
Width
Qty
(per length)
MCDSTRIP50
Bearing Strip
2.4m
50mm
2.4m
MCDSTRIP75
Bearing Strip
2.4m
75mm
2.4m
MCDSTRIP100
Bearing Strip
2.4m
100mm
2.4m
Dowelsert Slab Insert
McDowel Bearing Strip has been tested by Canterbury
University Research? You can view the reports on line
at www.reids.co.nz.
Reidbar Components
McDowel Bearing Strip
Keeps slabs vertically aligned across construction joints while allowing lateral
displacement due to differential shrinkage)
Part No.
Description
Length
Dia. Ø
Qty
(per length)
DSR16
Dowelsert R16x400
400mm
16mm
ea
DSR20
Dowelsert R20x600
600mm
20mm
ea
43
POST TENSIONING
Post-Tensioning is a method of applying a
compressive load to a concrete element after it
has been poured.
The Reid™ unbonded post-tensioning system involves the
casting of ‘greased and sheathed’ 12.7mm strand into the
concrete element to be stressed.
Applications
• Floors and foundations on grade.
• Precast wall panels.
• Strongback replacement.
Features & Benefits
•
Large reduction in traditional reinforcement.
•
Tendons easily ‘weaved’ allowing efficient design.
•
Efficient and cost effective floors.
•
Easily produced on site.
•
Eliminates saw cuts.
•
Increases durability of ‘high traffic’ floors.
•
Allows panels to be erected without strongbacks.
•
Does not require expense of a pre-stressing bed.
Contact Reid for your nearest Approved Applicator.
Post Tensioning Accessories
Part No.
Description
Dia. Ø
Qty
(per length)
PT13GS
PT13GSKIT
Greased & Sheathed Strand 12.8mm
12.8mm
1 metre
Post Tensioning Kit
12.8mm
ea
Post Tensioning Kit
Ph 0800 88 22 12
44
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
stressfloor
CONCRETE FLOORs
Post Tensioned Floor System for Slabs-on-Grade
STYLISH SURFACE AREAS WITHOUT CRACKS OR SAWCUTS
Designers, builders, owners and users of
buildings are looking for a more efficient
environment in which they operate.
Structures built using unbonded posttensioning systems have many advantages
over traditional reinforced floors.
These advantages include:
• Reduced slab thickness
• Minimised cracking and saw joints
• More durable floor surface
• Enhanced construction speed
• Easier to construct
• Similar cost to conventional floors
• Minimised maintenance costs
45
contents
nirvana insulated concrete panels
Connector Pins
Insulating Polystyrene
48
48
48
Flexus50
Modular Floor System
Modular Stair System
Shotbond
Flexus Installers
Flexus Pre-Bagged Mix
53
formliners54
Architectural Design
architectural design with concrete
architectural design
Nirvana
Nirvana Connector Pin
Part No.
Description
Qty
NVC10x100
Connector Pin for ECC
200
NVC10X130
Connector Pin for 30mm poly sheet
200
NVC10X150
Connector Pin for 40-50mm poly sheet
200
NVC10X175*
Connector Pin for 75mm poly sheet
500
* Other sizes can be made for special orders
KOOLFOAM
Nirvana Insulating Polystyrene
We recommend Koolfoam’s Black Pearl® EPS Polystyrene. For further information
view our website www.reids.co.nz.
Part No.
BLACK PEARL
EXPANDED POLYSTYRENE
Description
Qty
RT30X27X12*
30mm Black Pearl EPS Insulating Polystyrene
ea
RT40X27X12*
40mm Black Pearl EPS Insulating Polystyrene
ea
RT50X27X12*
50mm Black Pearl EPS Insulating Polystyrene
ea
North Island
South Island
Koolfoam BLACK PEARL® Slab Insulation
Koolfoam THERMALOCK® jointing system
ADVANTAGES Koolfoam BLACK PEARL® Slab Insulation
• 20% better thermal performance than white EPS
• Thinner sheets can be used to achieve relevant R values
• No glare when installing
• Low water absorption
• Excellent compressive strength
• Increased Eco efficiency
• Complies with all aspects of AS1366 1992
ADVANTAGES Koolfoam
THERMALOCK® jointing system
• No sheet separation
• Eliminates thermal bridges
• Speed construction
Compressive Strength Tables
Type
@1%
Compressive
Stress kPa
@10%
Compressive
Stress kPa
Black Pearl
62
125
22
S Grade White
51
88
Density
kg/m3
16
H Grade White
63
122
22
What to specify?
BLACK PEARL
SLAB INSULATION
WITH THERMALOCK JOINT
The insulation used under a concrete floor should be
specified according to the compressive strength of the
product and the R value of the product.
Heated floors under the NZBC and
NZS 4218 require an R value of R1.9
RT30X27X12S
30mm Black Pearl EPS Insulating Polystyrene
ea
RT40X27X12S
40mm Black Pearl EPS Insulating Polystyrene
ea
RT50X27X12S
50mm Black Pearl EPS Insulating Polystyrene
ea
Black Pearl
R1.9 = 60mm
S Grade White R1.9 = 75mm
H Grade White R1.9 = 70mm
Note: For further R values refer to the Koolfoam thermal chart.
All R values and compressive strength figures are specific to
Koolfoam Black Pearl® and white EPS only.
KOOLFOAM LIMITED
34 Grayson Ave, Papatoetoe, Auckland, New Zealand.
Phone 09 279 9611, Freephone 0800 636 767, Fax 09 277 6704
Email koolfoam@xtra.co.nz
www.koolfoam.co.nz
“Solution based innovations for an environmentally responsible future”
* Indent only
EXPANDED VS EXTRUDED POLYSTYRENE
There is often some deliberation between Extruded (XPS) vs Expanded (EPS) Polystyrene and what is better.
There has been testing undertaken in an accredited testing laboratory on in-service insulation after 15 years.
The tests* directly compare the two products and evaluated for both R-value and water absorption.
15 Yr In-situ Test results
Results upon Extraction
Results after 30days @ 72° F 50% RH
EPS
XPS
EPS
XPS
R-value / inch
3.4
2.6
3.7
2.8
Moisture content
volume %
4.8
18.9
0.7
16.7
OBSERVATIONS:
•
•
In a side-by-side comparison in an actual application, Type I EPS out performed XPS on both R-value
retention and water absorbtion.
The study highlights that short-term immersion testing is not a good indication of how insulation performs
on actual construction sites.
*Tests as per the INSULFOAM LLC -TECHNICAL CENTER, Technical Bulletin No. 22.
For more information on the test information and conclusion, please contact Reid on 0800 88 22 12.
Ph 0800 88 22 12
48
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
architectural design
flexus™ a ‘bendable’ concrete innovation
Flexus
Reid™ has pioneered a breakthrough in a high performance fibre-reinforced engineered cementitious composite
(ECC) that provides the structural integrity of reinforced concrete but without the weight or thickness. The new
design medium branded Flexus™, has unique properties such as ductility and improved durability, however its most
important feature is its ability to strain harden under tensile or flexural loads. Flexus™ can be sprayed or poured to
produce a multitude of products for the construction industry. For more information on the Flexus™ range, visit our
web site www.flexus.co.nz.
PH: 0800 88 22 12
49
Flexus™ Stair System
studio italia showroom, parnell
The development of Flexus™ has allowed for a range of
products which can now be released into the market. The
Flexus™ Modular Stair System has been developed as an
alternative to timber and precast concrete stair units, for the
residential and commercial building sectors.
Kerry Avery, Architect Director of Avery Team Architects, has
had a long interest in using new materials in both construction
and fit out projects.
Kerry came across Flexus™ at an early stage of
development, when investigating alternatives to concrete
in conjunction with lightweight steel and timber hybrid
structures. When Studio Italia requested a new wide
feature stair capable of easily maneuvering large cabinetry
and furniture between levels in its Auckland showroom, it
immediately came to mind as a potential solution.
The custom moulded treads and risers, and their long span
properties reduced the need to fully frame and fire rate the
support structure. Its natural self finishing concrete look
combined with exposed structural steel and glass panels
created a functional staircase, with an industrial prefab look.
Client:
50
innovative | flexible | versatile | superior | flexus
Studio Italia
Architect: Avery Team Architects
Builder: John Booth Builders
www.flexus.co.nz
Flexus Modular Floor System
middlemore hospital, auckland
The installation of over 1000m2 of Flexus™ modular flooring into
the new CMDHB Centre for Health Service Innovation (CHSI)
for Middlemore Hospital in Auckland, has just been successfully
completed.
The Flexus™ modular flooring system has been developed as an
alternative to timber framed and precast concrete floors for the
residential and light commercial building sectors.
The building has been erected over essential car parks for the
hospital and due to this, the building has been designed to be
broken down and re-erected on another site within the hospital
grounds within four years.
Over one hundred Flexus™ modular flooring modules were
manufactured to cover the 1000m2 of mid-floor and consisted of
two 4.5m and one 3m span, all at 2.4m wide, with an overall depth
of 340mm.
Flexus
The building was constructed in 3 sections, each taking only one
day to install the 300m2 of Flexus™ flooring modules. The speed
of erection and the overall feel of the floor was very impressive and
exceeded Arrow’s expectations.
JASMAX decided on the Flexus™ modular flooring system as the
superior acoustic performance was required to allow the lower level
teaching facilities to be unaffected by movement and background
noise from the rooms above. The flooring system achieved an IIC of
81 which exceeded the design requirements.
Due to the possible relocation of the building, coach screw fixings
were chosen over the standard skew nail fixings, which will allow
the flooring modules to be easily dismantled when required.
Cllient Middlemore Hospital
Architectural Designer: JASMAX
Engineering: Holmes Consulting Group
Arrow’s Site Project Manager, Kevin Giddings, commented,
“ I bet you didn’t even expect it to go up as quick
or as easy as it did ”
Main Contractor: Arrow International
PH: 0800 88 22 12
51
Flexus™ Shotbond
victoria park chimney, auckland
From Auckland’s first dump site to a site of historic significance the Victoria
Park Market, which is currently under redevelopment, is now one of
Auckland’s most recognised landmarks.
Eight tenants are set to move in once the project, which includes restaurants,
nightclubs and a new retail precinct, is completed.
Victoria Park Market in Freeman’s Bay, exemplified by the thirty eight metre
high chimney, was erected in 1904. The complex is a Category 1 Historic
Places building under the Historic Places Act 1993, hence the decision to
structurally retrofit the chimney to ensure one of Auckland’s iconic landmarks
would be around for many years to come.
A 20mm lining of Flexus™ Shotbond was sprayed onto the inside surface of
the brick chimney which gave it strength and ductility to resist lateral, seismic
and wind loadings while preserving the heritage significance of the landmark.
Flexus™ Shotbond is specifically designed as a material for seismic retrofitting
of URM buildings and the upgrading of bridge and wharf infrastructure. In
many cases significant strength can be provided by the Flexus™ layer itself
without the need of any additional reinforcing steel.
The unique strain-hardening properties of Flexus™ make it quite different from
any other fibre reinforced cement or mortar and its ability to bend enables
it to add ductility and strength to unreinforced masonry, even when applied
to only the interior surface. This makes it particularly appealing to designers
and owners of heritage buildings where the other alternative of thick layers of
reinforced concrete would affect fixtures and usable interior spaces.
“Thanks to the team at Reids for working with us to meet the specific
requirements for this unique project.
A great product that will last the test of time”.
Tony Howard , CMP Construction
Project:
Victoria Park Market
Main Contractor:
CMP Construction
Structural Engineers:
Buller George Turkington
Flexus™ Applicator :
Shotcrete & Rock NZ Ltd
52
innovative | flexible | versatile | superior | flexus
www.flexus.co.nz
Flexus™ Architectural Panels
Flexus is available from the following approved manufacturers and installers. If you are interested in manufacturing any of the
Flexus range of products, please contact our sales team directly on 0800 88 22 12 for further information. Reid are able to
assist on engineering detail and performance values. Email; engineeringteam@reids.co.nz.
Flexus™ Shotbond
Aardvark Concrete - North Island
Kidson Construction - South Island
Contact: Glen Jones
Phone: (04) 237-9595
Email: admin@aadvarkconcrete.co.nzt
Contact: Phone: Email: John Belman
03-547 9619
info@kidson.co.nz
Flexus™ Modular Floor System
Modular Flooring
Contact: Mobile: Email: Warwick Pirie
027 577 1140
warwick@modular.net.nz
Flexus™ Stair System
Wilco Precast
Colin Beavis 740mm
09 295 1060
355mm
355mm
colin@wilcoprecast.co.nz
265mm
190mm
120mm
90mm
30
Flexus
Contact: Phone: Email: 25mm step
100mm
25mm step
50mm
FSM
Flexus Bagged Mixes
Flexus Casting Mix with Flyash 20KG
STI 00000 DET 0000000 00/00/07
Description Colour
FCMF
Qty
SURFACE PREPARATION
Concrete surfaces should be clean and free from surface
contaminants.
We recommend “hydro blasting” all substrates that will be Shotbonded.
Dry concrete substrates should be saturated with water before
application of Shotbond.
CURING
95% of curing will be achieved after 28 days. For best results, cure at
20°C for the first 24 hours at least (above 5°C is essential) and
maintain a high relative humidity of 95% for the first 7 days. Best way
is either to keep moist or use an appropriate curing membrane.
ea
Shotbond Mix
FSM
WATER ADDITION
Water must be added as per the mix design. DO NOT under or over
compensate. Failure to follow all instructions will result in poor product
quality.
MIXING
Mixing must only be done in a specified mixing apparatus. No other
apparatus to be used.
530mm
Casting Mix
680mm
Description
20mm NON PRINT AREA
Flexus Structural Shotbond Pre-mix is
a cementious blend, which mixed
with clean water, produces a
structural mortar with unique
tensile strain hardening
and flexural properties.
PACKAGING
20kg Pre-mix bag produces approximately 11.0 litres of Flexus ECC.
Part No.
HANDLING PRECAUTIONS
RISK
Cement can cause respiratory, eye and skin irritation. Wet Flexus can
be corrosive to skin and eyes and may cause dermatitis. Repeated
inhalation of dust should be avoided.
innovative | flexible | versatile | superior | flexus
SAFETY
Wear suitable dust mask, protective clothing, gloves and eye
protection. Wash hands thoroughly after handling this product.
FIRST AID
Flush eyes with plenty of water and seek medical attention
immediately if symptoms persist. Wash skin with clean water.
Flexus
Shotbond
Mix
SPILLS/LEAKS
Keep out of storm water and sewers.
Flexus Shotbond Mix 20KG
ea
MANUAL HANDLING
Due care and attention must be undertaken in the manual handling of
this bag to avoid personal injury.
DISCLAIMER
Reid Construction Systems and ITW New Zealand LTD accepts no
liability for damages or injury arising from the use of its products.
Batch Number:
DETMOLD SACKS
DESCRIPTION
Flexus Structural Shotbond Pre-mix is a cementitious blend, which
mixed with clean water, produces a structural mortar with unique
tensile strain hardening and flexural properties.
XX%
PREBAG LABEL INFORMATION | SHOTBOND
To be used only by approved Flexus Applicators
FSM
REID CONSTRUCTION SYSTEMS a division of ITW New Zealand LTD
Customer services
Ph: 0800 88 22 12 Fax: 0800 88 22 55
Head Office
23 - 29 Poland Rd, Wairau Valley, Glenfield, Auckland, New Zealand
www.flexus.co.nz
FSM
For all Flexus sales and enquiries please call sales service on 0800 88 22 12.
To be used by approved
Flexus Applicators only
100mm
50mm
25mm step
530/355/120
LENGTH / WIDTH / BOTTOM
NET CONTENTS
20 kg
25mm step
225mm
PH: 0800 88 22 12
53
FORMLINERS
architectural design
THE FINEST ARCHITECTURAL CONCRETE
BEGINS WITH THE BEST FORMLINER.
Ph 0800 88 22 12
54
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
architectural design
Vac-U-Form™ Formliners
Single-use and Multi-use
plastic Formliners for
tilt-up and cast-in place
applications.
Single-use: Vac-U-Form Single-Use formliners are made from a high-impact styrene
plastic. They are a cost-effective choice when formliners are to be used once or need to be
cut to fit the project parameters.
Technical Data ASTM
IZOD Impact
2.0
D256
Tensile Strength
25.5 MPa
D638
Heat Deflection86.7°CD695
Vicat Softening100°CD1525
Wt. kg/m² 2.28mm
2.47 kg/m²
Multi-use: Vac-U-Form is made of acrylonitrile-butadiene styrene (ABS), which is a durable
Technical DataASTM
Hammer Lane, Stockton, California
Application: Cast-in-place
Formliner: Fitzgerald Vac-U-Form
Pattern: No. 16959 with Custom Geometric Panels
Vac-U-Form Formliners are an alternative and
economical choice where single or limited re-use
is desirable.
Benefits
• Economical for limited usage
• Lightweight
• Design versatility
• Easy to field cut
Vac-U-Form formliners provide unlimited design
versatility. Many patterns match side-to-side and
top-to-bottom on standard 1210 x 2430mm and
1210 x 3040mm panels.
IZOD Impact, ft.-lb/inch
@ 22.8°C
@ 4.4°C
2.99 J/cm
1.01 J/cm
D256
Tensile Strength 22.8°C, psi
Yield
Modulus
36.54 MPa
2275.27 MPa
D638
Flexural Strength 22.8°C, psi
Yield
Modulus
64.12 MPa
2240.73 MPa
D790
Falling Dart Impact, ft.-lb
@ 22.8°C
@ 4.4°C
31.18 J
18.98 J
Heat Deflection Annealed
@ 1.82 MPa
@ 0.46 MPa
92.8°C
99.4°C
Hardness 22.8°C Rockwell R105
Architectural Design
plastic that provides up to 15 re-uses at a low price.
D648
D785
Specific Gravity 1.05D792
Wt.kg/m²
2.28mm
3.81mm
2.48 kg/m² (Approx.)
4.76 kg/m² (Approx.)
Manufacturing Tolerance
Length: +/- 3mm at time of manufacture
Normal shrinkage and expansion is approximately 2mm in 3040mm with each 6.67° C
change in temperature.
55
architectural design
VinyLok™ Formliners
Benefits
Interlocking extruded
plastic Formliners for
tilt-up, precast and cast-in
place applications.
• Lower labor costs
• Fast installation
• Seamless finishes
• Less concrete leakage, grinding,
• Design flexibility
sacking or patching
VinyLok Single-Use and Multi-Use formliners are offered in a wide variety of standard
geometric patterns or can be fabricated for custom designs. Almost any linear design can be
produced easily.
Technical Data
Single-Use High-Impact StyreneASTM
IZOD Impact
2.0
D256
Tensile Strength
25.51 MPa
D638
Heat Deflection86.7°CD695
Vicat Softening100°CD1525
Lifetouch Building, Kansas City, Kansas
Application: Tilt-up
Formliner: Fitzgerald VinyLok
Pattern: No. 14302
Wt. lb./sq.ft. .090mil
2.47 kg/m²
Multi-Use ABSASTM
VinyLok formliners are extruded in lengths up to
12.2m for use in tilt-up, precast and cast-in-place
concrete applications. The unique interlocking
system provides the ideal solution for projects
where a seamless finish is required.
IZOD Impact
@ 22.8°C
@ 4.4°C
2.99 J/cm
1.01 J/cm
D256
Tensile Strength 73° F, psi
Yield
Modulus
36.54 MPa
2275.27 MPa
D638
Flexural Strength 73° F, psi
Yield
Modulus
64.12 MPa
2240.80 MPa
D790
Falling Dart Impact, ft.-lb.
@ 22.8°C
@ 4.4°C
31.18 Joules
18.98 Joules
Heat Deflection Annealed
@ 1.82 MPa
@ 0.46 MPa
92.78 °CD648
99.44 °C
Hardness 73° F Rockwell R105
D785
Specific Gravity 1.05D792
Wt.kg/m²
VinyLok Interlocking panels are quickly installed
to provide a seamless finish both horizontally and
vertically. VinyLok minimizes concrete leakage,
grinding, sacking and patching.
Ph 0800 88 22 12
56
2.28mm
3.81mm
Manufacturing Tolerance
Length: +/- 0.3mm for every 3040mm
Width: +/- 1.6mm per piece
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
2.48 kg/m²
4.76 kg/m²
architectural design
GrayLastic™ Formliners
Extended-use elastometric
Formliners for precast and
cast-in place applications.
Application: Cast-in-place
Formliner: Fitzgerald GrayLastic
Pattern: Antietam Drystack, No. 17910
GrayLastic formliners provide maximum design
Fitzgerald’s GrayLastic formliners accurately reproduce virtually any design. Wood, stone,
latitude for precast or cast-in-place applications.
masonry, fractured rib, fluted rib, sandblast and a range of custom patterns are available.
They are re-usable up to 100 times, and are
GrayLastic has been used in numerous artistic applications, whether cast-in-place or precast.
especially economical for applications that
A seamless finish can be achieved through our interlocking patterns as well as with our side-to-
require an extended, reusable formliner.
side, top-to-bottom match points.
Benefits
Many patterns are available in sizes up to 30’ long, and all GrayLastic formliners can be easily
• Economical for extended usage
field-cut. Odd sizes or custom fabrications are available for special applications.
• Realistic replication
• High durability
• Seamless finishes
• Wide range of sizes
• Easily installed
GrayLastic elastomeric formliners are
manufactured from 100% polyurethane and are
Architectural Design
Clifty Falls State Park, Highway 60,
Madison, Indiana
Technical DataASTM
Shore A Hardness 50-55D2240
Cast Density, PCF55-60
Tear Strength, PLI90
D624
Tensile Strength, psi
5.31 MPa
D638 (D412)
Ultimate Elongation
275%
D638 (D412)
usually mold bonded to plywood. They are easily
attached to most concrete forming systems,
including wood, steel, aluminum and fiberglass.
Manufacturing Tolerances
Mold bonded to 19mm plywood: +/- 3mm (length and width)
Unbonded (custom order only): +/- 25mm (length and width)
57
architectural design
SINGLE USE FORMLINERS
Reid is proud to announce the local release of a select range of Fitzgerald Single-Use
Plastic Formliners. Single use formliners provide cost effective, architectural detail
suitable for use in precast, tilt-up and in-situ applications.
Fitzgerald Formliners, distributed by Reid pride themselves on the design and manufacture of the best formliners in the industry, focusing
their efforts solely on the continuous improvement of their products. Proprietary products such as - GrayLastic™, GrayLite™, Vac-UForm™ and VinyLok™ are some innovative formliners available in the construction market. With more than 250 standard and custom
patterns, we can offer an unrivalled variety of design options from seven categories of pattern types.
Pattern categories include fluted ribs, fractured ribs, masonry, sandblast, stone & rock, wood textures and geometric shapes. From
conceptual design through to the final product, The attention to detail, quality and engineering guarantees the most creative and costeffective solution for your project.
Reid is proud to announce the local release of a select range of formliner patterns. These patterns will be stocked in Reid central
warehouse located in Melbourne, and will be available for immediate despatch. Delivery lead times may vary as single-use extruded and
vacuum formed sheets will require special handling, packaging and transportation. Stock availability is also subject to the parameters
and requirements of the specific project. Arrangements can be made for high-volume requirements, although longer lead times will be
applicable.
Ph 0800 88 22 12
58
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
architectural design
VL
VinyLok™ Single Use Interlocking
Formliners
FZ
VinyLok™ formliners are extruded in a single use, rigid polystyrene
plastic. The formliners are extruded in lengths of 9 metres and
offer approximately 150mm in width per single sheet. The patented
VinyLok™ interlocking system allows for a seamless finish for concrete
walls in tilt-up, precast or in-situ applications. VinyLok™ features
an interlocking nailing strip, designed for simple fixing of the liner to
formwork or concrete slabs. The patented rib easily locks over the top
of the fasteners, providing seamless concrete finishes with no unsightly
nail head impressions or grooves reflected in the cast panel. VinyLok™
is quick and easy to assemble and the interlocking nailing strip
eliminates the need for patching.
Architectural Design
VS
Vac-U-Form™ Single Use Plastic
Formliners
Vac-U-Form™ Reid’s range of formliner systems, provide unique
features and benefits to precasters, tilt up contractors and
Formworkers alike. Vac-U-Form™ formliners are an alternative and
economical choice where single casting is desired. Vac-U-Form™
formliners provide design versatility with many patterns matching
side-to-side and also top-to-bottom. The Single-Use Vac-U-Form™
formliners are made from a high-impact styrene plastic. They are a
cost-effective choice when formliners are to be used only once, or need
to be cut to fit the project parameters.
The new FitzLok™ Interlocking formliner panels provide a seamless,
simulated smooth brick or block masonry finish. Available locally in the
8” (203mm) Smooth Brick Running Bond pattern (#16941), FitzLok™
plastic formliner panels have keyed ends which include an overlapping
grout joint system that locks each panel into place. It completely
eliminates the time it previously took to either tape, glue or align
formliner panels. With FitzLok™ there is no patching, grinding or
buffing of seams or butt joints. FitzLok™ formliners reduce labour time
by allowing you to quickly and easily “snap” formliner panels together.
FitzLok™ Single Use Interlocking
Formliners
59
architectural design
FORMLINER Quick Reference Guide
VS Vac-U-Form™ Formliners
FZ FitzLok™ Interlocking Seamless Formliners
VS
MA
16947
200mm Used Brick
Running Bond
1220mm W x 2440mm H
Max. Liner Depth: 6mm
FZ
MA
16941
200mm Smooth Brick
Running Bond
924mm W x 688mm H Max Liner
Depth: 6mm
Ph 0800 88 22 12
60
WOODEN PLANK
16020
Rough Sawn Plank
3048mm W x 1220mm H
Board Widths: 110mm
Max. Liner Depth: 3mm
VS
WP
16923
Barn Wood Grain
3048mm W x 1220mm H
Board Widths: 76-175mm
Max Liner Depth: 6mm
VS
WP
16928
150mm Ship Lap Plank
3048mm W x 1220mm H
Board Width: 152mm
Max. Liner Depth: 25mm

VS
WP
STONE & ROCK
16971
Splitface Running
Bond Brick
2440mm W x 1220mm H
Max. Liner Depth: 19mm
WOODEN PLANK
MASONRY
MASONRY
VS
MA
STONE & ROCK
FF Fractured Fin
SR Stone & Rock Patterns
STONE & ROCK
GE Geometric Pattern
WOODEN PLANK
WP Wooden Plank Patterns
MASONRY
MA Masonry Patterns
VL
FL
VinyLok™ Interlocking Extruded Formliners
Fluted Rib Patterns
VS
SR
16986
Georgetown Ashlar
3048mm W x 1220mm H
Block Widths: 228-736mm
Block Heights: 127-381mm
Max. Liner Depth: 38mm
VS
SR
17002
Austin Ashlar
2440mm W x 1220mm H
Stone Widths: 127-686mm
Block Heights: 50-356mm
Max. Liner Depth: 25mm
VS
SR
16980
Yosemite Rock
1220mm W x 3048mm H
Max. Liner Depth: 19mm
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
14304
152.4mm W x 9m Long
On Centre: 50.8mm
Pattern Peak: 19.05mm
Pattern Valley: 19.05mm
Max. Liner Depth: 19.05mm
VL
FL
14308
203.2mm W x 9m Long
On Centre: 101.6mm
Pattern Peak: 25.4mm
Pattern Valley: 25.4mm
Max. Liner Depth: 25.4mm
FLUTED RIB
VL
FL
FLUTED RIB
FLUTED RIB
architectural design
VL
FL
14542
152.4mm W x 9m Long
On Centre: 152.4mm
Pattern Peak: 25.4mm
Pattern Valley: 101.6mm
Max. Liner Depth: 19.05mm
Architectural Design
VS
FF
16951
Sahara Fin
1220mm W x 3048mm H
Maximum Liner Depth: 25mm
GEOMETRIC
FRACTURED FIN

VS
GE
20003
Western Range Grass
2702mm W x 914mm H
Maximum Liner Depth: 19mm
61
contents
ORBIPLATE64
Orbiset64
Flat Square Washers
64
CAST-IN CHANNEL
65
CORRUGATED TUBE
65
Grout66
ACCESSORIES67
Weldplates67
Backing Rod
67
construction chemicals
68
Foam68
Acrylic Sealant
68
Polyurethane Sealant
68
Formwork Sealant
68
Sealant Gun Accessories
68
SEALERS69
Hardeners and Sealers
69
PATCHING, PLASTERING & RENDERING
70
Magic Patch
70
Magic Coat
70
Plaster Products
70
Glowmarkers70
CHEMSET CRACK INJECTION SYSTEMS
71
Panel Connections
panel to panel
PANEL CONNECTIONS
Orbiplate™
What is the Reid™ Orbiplate™ Connector?
The Reid™ Orbiplate™ Connector is a patented eccentric plate assembly which is used
for providing tolerance in all directions when connecting structural steel work and
concrete components. The Orbiplate™ is comprised of three parts. The outer and inner
plates have concentric and eccentric circular holes. The inner plate has two holes to
suit M16 and M20 fixing bolts.
How do you use Orbiplate™?
Orbiplate™ is used for steel to concrete or concrete to concrete connections.
It is welded to the steel structure and connected to the concrete structure by using
Reid™ Metric Threaded Inserts M16 or M20.
Part number TIM16x75
with NP16 nail on plate
No site welding or drill fixing
No site welding, no drilling and no waiting! All welding is completed at the structural
steel yard. Orbiplate™ has a prepared edge for easy welding. No drilling on site is
required - no costly remedial work necessary.
Cross-section diagram
with Reid Metric Threaded
Insert cast into the concrete
component. A structural bolt
completes the final connection.
Integrity of Connection
A structural connection is achieved with a spanner and the use of an 8.8 structural bolt.
A Reid™ Metric Threaded Insert provides the necessary connection into concrete and
ensures the integrity of the connection.
Cost Saving
Orbiplate™ provides a quick and efficient connection, thus resulting in a faster
installation with less crane time. No power to location or electrical tools are required.
Health & Safety
Reduces OSH requirements working in wet conditions working with power tools.
Welding at heights is no longer required.
Orbiplate used on the Dunedin Stadium to connect the concrete
seating to the structure.
Reid Orbiplate Connector
Part No.
Descriptions
Qty
(per box)
Orbiset
Full Set of Washers and Plate
16FSW
M16 x 50 x 5mm Galv Flat Square Washer
300
20FSW
M20 x 50 x 5mm Galv Flat Square Washer
250
5
All the structural steel beams had Orbiplate’s welded to them for ease
of connection to the concrete panels.
Ph 0800 88 22 12
64
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
PANEL CONNECTIONS
Cast-in Channel
Cold Rolled / Not Toothed Channels
Suitable for light to medium duty connections, for tensile and limited shear loads.
Part No.
Channel
size
w x h (mm)
HTA4930300L3A 49 x 30
Channel
length
(mm)
Anchors
per
channel
Depth
channel &
anchor
Recomm.
matching
T-bolt
Qty Bolts
per channel
300mm
3
90mm
HS5030M1660H
2
Hot Rolled / Toothed Channels
Suitable for heavy duty connections, full structural tensile and shear loads
Part No.
Channel
size
w x h (mm)
Channel
length
(mm)
Anchors
per
channel
Depth
channel &
anchor
Recomm.
matching
T-bolt
Qty Bolts
per
channel
HZA3823300H3A
38 x 23
300mm
3
96mm
HZS3823M1660H 2
HZA3823175H2A
38 x 23
175mm
2
96mm
HZS3823M1660H 1
T-Bolts
Suitable for heavy duty connections - relative to channel size as per tables above.
Finish
Metric Size
Head
Width
Length
Head Size
Qty
HS5030M1660H
High Tensile
M16
41.0mm
60mm
ea
HZS3823M1660H
High Tensile
M16
41.0mm
60mm
ea
Light To Medium Duty Connections
- Cold Rolled
Heavy Duty Connections
- Hot Rolled (Toothed)
• Ideal for electrical & mechanical
services.
• Can also be used for curtain wall
or elevators depending on design
requirements.
• Ideal for precast panel to panel connections.
• Ideal for beam to precast panel connections.
• No on-site welding required for panel connections.
• Full load capacity in all directions
•Able to take dynamic loads well
Panel Connections
Part No.
All cast-in channels are supplied hot dip galvanised. Other finishes and channel lengths are available on request. Refer to
Reid™ Cast-In Channel Technical Information catalogue on the website www.reids.co.nz.
65
PANEL CONNECTIONS
Corrugated Tube
Corrugated Tube is used as a duct former for a variety of precast
and cast-insitu concrete work. The semi-rigid hot dipped galvanised
metal duct is strong and durable for casting into concrete and is
easily tied into position adjacent to reinforcing steel.
Applications
• Service penetrations.
• Post-tensioning ducts.
• Precast connections.
• Formers for starter bars.
Features & Benefits
• Fabricated from 0.30mm thick hot dipped galvanised steel
• Spiral deformations for better adhesion to concrete.
• Standard length 5.8m
• Cutting service provided - charges applicable.
• Other sizes available on request.
• Used with Ramset Premium Non-Shrink Grout.
Corrugated Tube
Part No.
Descriptions
Qty
CT30G
30mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT40G
40mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT50G
50mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT60G
60mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT70G
70mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT80G
80mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT90G
90mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT100G
100mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CT110G
110mm ID x 0.3mm x 5.8m HDG Corrugated Tube
ea
CTCUT
Cutting service available. Allow 3 day lead time
ea
* Indent only
Grout
Precision, non-shrink grout suitable for use with grout sleeves, corrugated tube or
post tensioning systems.
Part No.
Description
Qty
(per bag)
RPGMP20
Ramset Premium Non-Shrink Grout 55MPa
20kg
LSMP
Mix. Paddle Spiral LRG PM120S
ea
Ph 0800 88 22 12
66
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
PANEL CONNECTIONS
Accessories
Weldplates
Part No.
Anchors
Thickness Concrete
Steel Plate Panel
Thickness
Length
(l)
Width
(w)
Qty
(per box)
WP200/120
1
10mm
120mm
200mm
150mm
ea
WP200/150
1
10mm
150mm
200mm
150mm
ea
WP300/120
2
10mm
120mm
300mm
150mm
ea
WP300/150
2
10mm
150mm
300mm
150mm
* Reid™ Engineering Design service can make custom order weldplates at your
request. Contact us on 0800 88 22 12, for further information.
ea
(l)
(w)
concrete
panel
thickness
Backing Rod
Descriptions
Qty
(per box)
PFROD10
Closed Cell P.E.F Backing Rod 10mm x 50m
50m
PFROD13
Closed Cell P.E.F Backing Rod 13mm x 50m
50m
PFROD15
Closed Cell P.E.F Backing Rod 15mm x 50m
50m
PFROD20
Closed Cell P.E.F Backing Rod 20mm x 50m
50m
PFROD25
Closed Cell P.E.F Backing Rod 25mm x 50m
50m
50m
PFROD30
Closed Cell P.E.F Backing Rod 30mm x 30m
PFROD40
Closed Cell P.E.F Backing Rod 40mm x 2m
2m
PFROD50
Closed Cell P.E.F Backing Rod 50mm x 2m
2m
Panel Connections
Part No.
67
PANEL CONNECTIONS
Construction Chemicals
Formwork Sealant
Part No.
Descriptions
Qty
(per box)
FMSLG300
Silicone for Precasters - 300ml Cartridge
12
FMSLG600*
Formwork Sealant Clear - 600ml Sausage
ea
* Indent only
Hi-Seal & General Sealants
Part No.
Descriptions
Size
Qty
(per box)
300ml
12
Hi Seal Construction Sealants
HSDMW300
Hi-Seal DuraMax Multi Purpose Sealant - White
HSDMG600
Hi-Seal DuraMax Multi Purpose Sealant - Grey
600ml
20
HSDMB600
Hi-Seal DuraMax Multi Purpose Sealant - Black
600ml
20
HSFCG600
Hi-Seal FC - Fast Curing PU Sealant - Trafficable
600ml
20
HYSLGYG720
Hiseal Polyurethane PU+ Class A - Grey
600ml
20
HYSLGYG375
Hiseal Polyurethane PU+ Class A - Grey
300ml
25
RFSLTRG300
General Sealants
GLSLCLG300
Glass Seal Silicone Glass (clear)
300ml
12
GPSLWHG450
Gapseal Paintable Acrylic Caulk
300ml
12
RFSLTRG300
Roof Seal Silicone Metal (clear)
300ml
12
WRSLTRG300
Water Seal Silicone Sani. (clear)
300ml
12
WRSLWHG300
Water Seal Silicone Sani. (white)
300ml
12
FMFLG750
FomoFill Foam 750gm
750gm
12
FYBRGYS
FyreBrake Sealant
300ml
12
Sealant Gun Accessories
Part No.
Descriptions
Qty
RCA1
Applicator Gun Cartridge 375ml
ea
R258024
Applicator Gun Nozzle
ea
SABGU37
Applicator Gun Satchet 37cm
ea
SABGU37
Ph 0800 88 22 12
68
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
PANEL CONNECTIONS
TM
ChemSet
Epoxies
Ramset Chemset Epoxies are a two part low viscosity high strength epoxy for injection of cracks in all concrete
elements. It offers excellent adhesion and high compressive strength and restores the structure to its original
monolithic condition.
Epoxies
Chemset Silca & Sand-filled Jointing System
Part No
Description
EPTGE131-1.2KG
Trowel Grade e131 Thixotropic Putty 1.2KG
EPTGE131-5KG
Trowel Grade e131 Thixotropic Putty 5KG
EPTGE131-30KG
Trowel Grade e131 Thixotropic Putty 30KG
Part No
Description
EPLES-1.2KG
Liquid ES Epoxy Resin Grout 1.2KG
EPLES-5KG
Liquid ES Epoxy Resin Grout 5KG
EPLES-30KG
Liquid ES Epoxy Resin Grout 30KG
Panel Connections
Two part pourable epoxy resin based grout
Two part epoxy concrete bonding agent
Part No
Description
epube132-1.2kg
Ultrabond e312 1.2KG
epube132-5kg
Ultrabond e312 5KG
epube132-30kg
Ultrabond e312 30KG
Hi Modulus multi-purpose epoxy grouting/bonding adhesive
Part No
Description
EPCMEA2L
Chem Mortar eA 2L
EPCMEA8L
Chem Mortar eA 8L
EPCMEA20L
Chem Mortar eA 20L
Bitumen waterproofing Membrane
Part No
Description
BTWM20L
Black Tank
69
PANEL CONNECTIONS
Patching, Plastering & Rendering
Magic Patch
Magic Patch is a lightweight concrete patching mortar. It is blended from high grade
materials to provide a non-structural patching mortar to remedy visible joining plates,
threaded insert and bug holes. Recommended for non-structural patching of precast
and tilt-up concrete panels, but can be also used for a wide range of other concrete
repairs.
Part No.
Descriptions
Qty
(per bag)
MAGICPATCH
Lightweight Non-Structural Patching Mortar
18L
Magic Coat
Lightweight
Concrete Patching
Mortar
0800 88 22 12
Magic Coat is a “Do It Yourself” easy to use “One Coat” grey architectural finish designed
to be used on a variety of concrete products and substrates to cover unsightly concrete
surfaces with an architectural ‘Render’ look at a cost effective price.
Part No.
Descriptions
Qty
(per bag)
MAGICCOAT
Roll-on Texture
18L
* Creates an even grey colour
* Water resistant membrane
* Provides a stippled texture
* Easy to apply - mix and roll
Plaster Products
0800 88 22 12
Contents 18 Litres - Dry Volume
Part No.
Descriptions
Qty
(per box)
CMCRL20
Cemcrete Cement Additive
20L
CMCRL5
Cemcrete Cement Additive
5L
Glowmarkers
Part No.
Descriptions
Qty
(per box)
GMB500ML
Glowmark Marker Paint (Blue 500ml)
12
GMG500ML
Glowmark Marker Paint (Green 500ml)
12
GMO500ML
Glowmark Marker Paint (Orange 500ml)
12
GMP500ML
Glowmark Marker Paint (Pink 500ml)
12
GMR500ML
Glowmark Marker Paint (Red 500ml)
12
12
OS300
Oil Spray Multi-use (300ml)
OFP600ML
Orange Fluro Paint (600ml)
12
PFP600ML
Pink Fluro Paint (600ml)
12
RFP600ML
Red Fluro Paint (600ml)
12
Ph 0800 88 22 12
70
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
CMCRL5
PANEL CONNECTIONS
TM
ChemSet
Crack Injection System
Ramset Chemset Crack Injection System is a two part low viscosity high strength epoxy for injection of cracks in all concrete
elements. It offers excellent adhesion and high compressive strength and restores the structure to its original monolithic condition.
Approved applicators can install on your project. Contact your local representative to discuss.
Fast dispensing 2 Part Epoxy Crack Injection 900ml System
Part No
Description
RAMNZIE900
900 ML Crack Repair Kit
62532HOSE
Static Mixer For 900 ML Kit
427SAE
Crack Injection Flange Adaptor
419SAE
Crack Plastic Flange Pack
7x1004
Flange Removing Tool
600XPPM1
Bi-Mixer Manual - 300:600 ML
Panel Connections
General Purpose Epoxy Mortar Binder EPIREZ® 133 - 1 Litre Kit
Ramset Chemset Crack Repair Epoxy Mortar is a solventless epoxy mortar or concrete
binder designed for applications demanding high structural integrity. When mixed with
graded sand fillers it produces various consistencies. Ramset Chemset Epoxy Mortar is
100% solids epoxy with negligible shrinkage. Ramset Chemset Epoxy Mortar has been
independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in
contact with potable water.
Areas of application
•
•
•
•
•
Structural bonding of new to old concrete
Repairing cracks in concrete
Structural repair of spalled concrete and masonry
Grouting of load bearing bolts and supports in concrete
Splash zone repairs to concrete and timber piled structures
Features
•
•
•
•
•
•
•
•
Multi-purpose use
High mechanical strength
Low viscosity
High chemical resistance
Excellent adhesion to wet or dry concrete
Non-shrink
Low temperature cure
Aggregate extendible
new
71
contents
LIEBIG STRUCTURAL ANCHORS
Liebig Heavy Duty Anchors
Liebig Component Sets
Liebig Superplus Self Undercutting Anchors
Propping Anchors
Flat Square Washers
74
74
74
74
74
74
SPATEC PLUS™ SAFETY ANCHORS
76
Spatec Plus™ Safety Anchors
76
Boa™ Coil Expansion Anchors
76
Boa™ Replacement Coils
76
DYNABOLT ™ SLEEVE ANCHORS
77
Dynabolt™ Nut Head
77
Dynabolt™Hex Head
78
Dynabolt™ Post Head
78
FASTENING ANCHORS
79
Flanged AnkaScrew-in Anchors
79
Removable Formwork Spikes
79
Concrete Nails
79
Trubolt™80
DYNADRILL CARBIDE DRILL BITS & DRILLS
DynaDrill 576
DynaDrill 544
81-82
83
83
CHEMSET ™ 84
Chemset™ Stud Anchors
84
Chemset™ Maxima Spin Capsules
84
Chemset™ Accessories
84
Chemset™ Allthread Rod
85
Chemset™ Couplings
85
86
DYNASET ™ DROP IN ANCHORS
Dynaset™ Drop In Anchors
86
Dynaset™ Setting Tools
86
72
RIC500A 825ML CARTRIDGE & ACCESSORIES
87
ramset chemical fastening
Chemset™ Injection 101 Series
Chemset A7 Ultra & Accessories
Epcon™ C6 Series & Accessories
Chemset C8 Ultra
88
88
88
88
89
powder fixing - spitfire 75mm
89
CUTTING & GRINDING
Diamond Cutting Blades
Grinding Wheels & Stones
91
91
91
RAMSET TOOLS
Angle Grinders
Laser Level
Vacuum Cleaner
Diamond Drilling
92
93
93
93
94
Fasteners & Tools
Fasteners & Tools
73
FASTENERS & TOOLS
Liebig Heavy Duty Anchors & Component Sets
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
AS15/15
M10
15mm
85mm
105mm
25
AS20/15
M12
20mm
90mm
120mm
10
Component Sets
AS15CS
Re-Kit Expansion Shield and Cone for AS15/15
100
AS20CS
Re-Kit Expansion Shield and Cone for AS20/15
50
Liebig Superplus BLS Carbon steel, zinc plated Self Undercut Anchors
Threaded stud with hex nut and washer
Material: Grade 8.8 carbon steel, zinc plated and blue passivated
Approvals: ETA-01/0011 – Option 1
Reid
Product Code
SPS14/130
Liebig
Product Code
BLS0814080025
SPS20/80
SPS20/120
BLS1220080015
Thread
Size
Øx
Max.
Ø Fixture
Depth of
Fixture
Hole
Drilled Hole Thickness
Eff.
Embedment
Depth
Total
Length
do x h1
tfix
df
hef
L
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Weight
Box
Quantity
[kg/100 pcs]
[pcs]
25
M8
14 x 100
25
16
80
130
13.4
M12
20 x 60
15
21
80
100
19.4
25
M12
20 x 105
15
21
80
130
26.5
10
SPS20/145
BLS1220080030
M12
20 x 105
30
21
80
145
29.5
10
SPS20/195
BLS1220150030
M12
20 x 175
30
21
150
215
43.5
10
SPS25/220
BLS1625150030
M16
25 x 185
30
26
150
220
70.0
10
SPS20/130SS**
BLS1220080015A4
M12
20 x 105
15
21
80
130
26.5
10
BLS0814040015
M8
14 x 60
15
16
40
80
8.0
25
BLS1220150050
M12
20 x 175
50
21
150
235
46.0
10
BLS1625150040
M16
25 x 185
40
26
150
230
72.0
10
BLS1625150060
M16
25 x 185
60
26
150
250
76.0
10
BLS1625200040
M16
25 x 235
40
26
200
280
89.0
10
BLS1625200060
M16
25 x 235
60
26
200
300
95.0
10
Indent Products
**Stainless Steel anchor. Other anchors are available on request.
Flat Square Washers
Part No.
Description
12FSW
M12 X 50 X 3mm Galv Flat Sq Washer
ea
12FSWZ
M12 x 50 x 3mm Zinc Flat Sq Washer
ea
16FSW
16FSW80
20FSW
24FSW
M16 x 50 x 5mm Galv Flat Sq Washer suitable for
AS15/15, B15/45 & HSB12 & 16mm Bolt
M16 x 80 x 6mm Galv Flat Sq Washer suitable for
RB Wing Nuts
M20 x 50 x 5mm Galv Flat Sq Washer designed to
be used with AS20/15, B20/50 & HDA18/110
M24 x 80 x 6mm Glav Flat Sq Washer
Ph 0800 88 22 12
74
Qty
(per box)
ea
ea
ea
ea
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
superplus
FASTENERS & TOOLS
Self-undercutting anchor
The undercut fixing system that does not require
a special setting tool. Now with E-TAG approval
for use in Seismic areas.
Type BLS
Function: Automatically self-undercutting. The unique design of
the SUPERPLUS causes an undercut to be created when the
installation torque is applied. As torque is applied to the anchor
the cone is drawn into the anchor sleeve and the sleeve’s outer
cutting teeth expand and undercut into the base material. This
results in a durable mechanical interlock with base material that
functions in both cracked and non-cracked concrete.
Benefits:
l High capacity in cracked and non-cracked concrete
l High reliability due to undercut technology
l Simple installation, no special drill bit or setting tool required
l Applying torque creates undercut
l Two approved embedment depths per diameter
l Lower installed cost than traditional undercut anchors
Fasteners & Tools
lReduced edge distances and spacings
75
FASTENERS & TOOLS
SAFETY BOLTS
SpaTec Plus Safety Anchors
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
SP10105
M10
15mm
60mm
105mm
25
SP12105
M12
18mm
70mm
105mm
25
SP12120
M12
18mm
70mm
120mm
25
SP16145
M16
24mm
95mm
145mm
ea
SP20170
M20
28mm
110mm
170mm
ea
Kit
SP12NUT
12mm Re-Kit Components
ea
Stainless Steel 316 (Indent only)
SP10105SS
M10
15mm
60mm
105mm
25
SP12120SS
M12
18mm
70mm
120mm
25
Boa Coil Expansion Anchors
Boa Coils are are a high strength expansion anchor made from high tensile steel
suitable for use in concrete, solid brick and solid masonry.
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
BAC06060
M10
10mm
30mm
60mm
ea
BAC06075
M10
10mm
30mm
75mm
ea
BAC06100
M10
10mm
30mm
100mm
ea
BAC06125
M10
10mm
30mm
125mm
ea
BAC08075
M13
13mm
40mm
75mm
ea
BAC08100
M13
13mm
40mm
100mm
ea
BAC08140
M13
13mm
40mm
140mm
ea
BAC10090
M16
16mm
50mm
90mm
ea
BAC10125
M16
16mm
50mm
125mm
ea
BAC12085
M19
19mm
57mm
85mm
ea
BAC12115
M19
19mm
57mm
115mm
ea
Boa Replacement Coils
Part No.
Anchor Size
Qty
(per box)
BAC06
Replacement Coils to Suit M10
100
BAC08
Replacement Coils to Suit M13
100
BAC10
Replacement Coils to Suit M16
100
BAC12
Replacement Coils to Suit M19
50
For techncial information on the loadings for all anchors, please refer to the Ramset Anchor Specification guide available
on the website or call your sales representative for a hard copy.
Ph 0800 88 22 12
76
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
DynaBolt™ Sleeve Anchors
DynaBolt Nut Head Anchors
Part No
Drill/
Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
6mm
20mm
26mm
ea
Zinc
DP06026
DP06040
6mm
20mm
40mm
ea
DP06060
6mm
20mm
60mm
ea
DP08040
8mm
30mm
40mm
ea
DP08065
8mm
30mm
65mm
ea
DP08090
8mm
30mm
90mm
ea
DP10040
10mm
35mm
40mm
ea
DP10050
10mm
35mm
50mm
ea
DP10075
10mm
35mm
75mm
ea
DP10100
10mm
35mm
100mm
ea
DP12060
12mm
40mm
60mm
ea
DP12070
12mm
40mm
70mm
ea
DP12100
12mm
40mm
100mm
ea
DP12125
12mm
40mm
125mm
ea
DP16065
16mm
55mm
65mm
ea
DP16110
16mm
55mm
110mm
ea
DP16140
16mm
55mm
140mm
ea
DP20080
20mm
70mm
80mm
ea
DP20115
20mm
70mm
115mm
ea
DP20160
20mm
70mm
160mm
ea
DP10050GH 10mm
35mm
50mm
ea
DP10075GH 10mm
35mm
75mm
ea
DP10100GH 10mm
35mm
100mm
ea
DP12060GH 12mm
40mm
60mm
ea
DP12070GH 12mm
40mm
70mm
ea
DP12100GH 12mm
40mm
100mm
ea
DP12125GH 12mm
40mm
125mm
ea
DP16065GH 16mm
55mm
65mm
ea
DP16110GH 16mm
55mm
110mm
ea
Fasteners & Tools
Galvanised
Stainless Steel 316
DP06040SS
6mm
20mm
40mm
ea
DP06060SS
t6mm
20mm
60mm
ea
DP08040SS
8mm
30mm
40mm
ea
DP08065SS
8mm
30mm
65mm
ea
DP10050SS
10mm
35mm
50mm
ea
DP10075SS
10mm
35mm
75mm
ea
DP10100SS
10mm
35mm
100mm
ea
DP12060SS
12mm
40mm
60mm
ea
DP12070SS
12mm
40mm
70mm
ea
77
FASTENERS & TOOLS
DynaBolt™ Sleeve Anchors
DynaBolt Hex Head Anchors
Part No.
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
8mm
40mm
45mm
ea
Zinc
DP08045H
DP08070H
8mm
40mm
70mm
ea
DP10055H
10mm
40mm
55mm
ea
DP10080H
10mm
40mm
80mm
ea
DP12065H
12mm
60mm
65mm
ea
DP12075H
12mm
60mm
75mm
ea
DP12105H
12mm
60mm
105mm
ea
DP16070H
16mm
65mm
70mm
ea
40mm
70mm
ea
Stainless Steel 316
DP08070HSS 8mm
DP10080HSS 10mm
40mm
80mm
ea
DP12075HSS 12mm
60mm
75mm
ea
DynaBolt Post Head Anchors (decorative finish zinc)
Part No.
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
DP06034F
6mm
34mm
34mm
ea
DP06060F
6mm
45mm
60mm
ea
DP06075F
6mm
70mm
75mm
ea
DP06100F
6mm
70mm
100mm
ea
DP08060F
8mm
55mm
60mm
ea
DP08085F
8mm
65mm
85mm
ea
DP10075F
10mm
30mm
75mm
ea
DP10100F
10mm
65mm
100mm
ea
Removable Formwork Spikes
Part No.
Description
Spike
Length
Qty
(per box)
SDFW0570
Removable Formwork Spike 5x70
70mm
100
SDFW0675
Removable Formwork Spike 6x75
75mm
100
Ph 0800 88 22 12
78
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
new
FASTENERS & TOOLS
Screw-In Anchors
AnkaScrew Flanged Screw-In Anchor for Interior & Exterior Use
The Flanged AnkaScrew bolt has a washered head and comes hot dipped galvanised
for exterior use. Note that the head diameter is 19mm.
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
AS06050GH M6
6mm
30mm
50mm
ea
AS06075GH M6
6mm
30mm
75mm
ea
AS06100GH M6
6mm
30mm
100mm
ea
AS08060GH M8
8mm
40mm
60mm
ea
AS08075GH M8
8mm
40mm
75mm
ea
AS08100GH M8
8mm
40mm
100mm
ea
AS10060GH M10
10mm
50mm
60mm
ea
AS10075GH M10
10mm
50mm
75mm
ea
AS10100GH M10
10mm
50mm
100mm
ea
AS12075GH M12
12mm
60mm
75mm
ea
AS12100GH M12
12mm
60mm
100mm
ea
AS12150GH M12
12mm
60mm
150mm
ea
Part No.
Description
Nail
Length
Shank
Diameter
Qty
(per box)
CW425
Concrete Nail with Washer 25mm
25mm
2.5mm
100
CW430
Concrete Nail with Washer 30mm
30mm
2.5mm
100
CW440
Concrete Nail with Washer 40mm
40mm
2.5mm
100
Fasteners & Tools
Concrete Nails
79
FASTENERS & TOOLS
Trubolt™ Wedge Anchors
Trubolt Stud Anchors
Part No.
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
T12080
12mm
48mm
80mm
ea
T12100
12mm
48mm
100mm
ea
T12120
12mm
48mm
120mm
ea
T12140
12mm
48mm
140mm
ea
T12180
12mm
48mm
180mm
ea
T16100
16mm
64mm
100mm
ea
T16125
16mm
64mm
125mm
ea
T16150
16mm
64mm
150mm
ea
T16175
16mm
64mm
175mm
ea
T20120
20mm
80mm
120mm
ea
T20160
20mm
80mm
160mm
ea
T12080GH
12mm
48mm
80mm
ea
T12100GH
12mm
48mm
100mm
ea
T12140GH
12mm
48mm
140mm
ea
T12180GH
12mm
48mm
180mm
ea
T16100GH
16mm
64mm
100mm
ea
T16125GH
16mm
64mm
125mm
ea
T16175GH
16mm
64mm
175mm
ea
T20120GH
20mm
80mm
120mm
ea
T20160GH
20mm
80mm
160mm
ea
T20215GH
20mm
80mm
215mm
ea
Zinc
Galvanised
Stainless Steel 316
T10075SS
10mm
40mm
75mm
ea
T10090SS
10mm
40mm
90mm
ea
T12080SS
12mm
48mm
80mm
ea
T12100SS
12mm
48mm
100mm
ea
T12140SS
12mm
48mm
140mm
ea
T16100SS
16mm
64mm
100mm
ea
T16125SS
16mm
64mm
125mm
ea
T16175SS
16mm
64mm
175mm
ea
T20120SS
20mm
80mm
120mm
ea
T20160SS
20mm
80mm
160mm
ea
Ph 0800 88 22 12
80
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
Drynadrill Carbide Drill Bits
Dynadrill Carbide Drill Bits
Carbide drill bits can be identified by the small spline (1/2” shaft) and 2 runner slots.
Part No.
Description
Shank
Type
Working
Length
Total
Length
Use
with
DD528
Use
with
DD526
Use
with
DD527
Use
with
DD532
Use
with
DD543
R3 PLUS CARBIDE
DDR305050
5mm x 50mm
SDS
50
110
О
О
О
О
О
DDR305100
5mm x 100mm
SDS
100
160
О
О
О
О
О
DDR306050
6mm x 50mm
SDS
50
110
√
√
О
О
О
DDR306100
6mm x 100mm
SDS
100
160
√
√
О
О
О
DDR306100X3
6.5mm x 100mm
SDS
50
110
√
√
О
О
О
DDR306150
6mm x 150mm
SDS
150
210
√
√
О
О
О
DDR306150X3
6.5mm x 150mm
SDS
50
110
√
√
О
О
О
DDR308065
8mm x 65mm
SDS
65
125
√
√
√
О
О
DDR308150
8mm x 150mm
SDS
150
210
√
√
√
О
О
DDR310100
10mm x 100mm
SDS
100
160
√
√
√
√
О
DDR310180
10mm x 180mm
SDS
180
240
√
√
√
√
О
DDR312125
12mm x 125mm
SDS
125
185
О
О
√
√
√
DDR312250
12mm x 250mm
SDS
250
310
О
О
√
√
√
DDR312400
12mm x 400mm
SDS
400
460
О
О
√
√
√
DDR313200
13mm x 200mm
SDS
215
275
О
О
О
√
√
DDR314200
14mm x 200mm
SDS
200
260
О
О
О
√
√
DDR315150
15mm x 150mm
SDS
150
210
О
О
О
√
√
DDR316200
16mm x 200mm
SDS
200
260
О
О
О
√
√
DDR316400
16mm x 400mm
SDS
400
460
О
О
О
√
√
Range convertising to a SDSPlus drive in late 2012.
Quatro (4 cutter) Carbide Drill Bits
Part No.
Description
Shank
Type
Working
Length
Total
Length
Use
with
DD528
Use
with
DD526
use
with
DD527
Use
with
DD532
Use
with
DD543
DQR316200
Q Bit 16mm x 200mm
R3 PLUS
200
DQR316400
Q Bit 16mm x 400mm
R3 PLUS
400
250
О
О
О
√
√
450
О
О
О
√
√
DQR318200
Q Bit 18mm x 200mm
R3 PLUS
DQR318400
Q Bit 18mm x 400mm
R3 PLUS
200
250
О
О
О
√
√
400
450
О
О
О
√
√
DQR320200
Q Bit 20mm x 200mm
DQR320400
Q Bit 20mm x 400mm
R3 PLUS
200
250
О
О
О
О
√
R3 PLUS
400
450
О
О
О
О
DQR322200
√
Q Bit 22mm x 200mm
R3 PLUS
200
250
О
О
DQR322400
Q Bit 22mm x 400mm
R3 PLUS
400
450
О
О
DQR324200
Q Bit 24mm x 200mm
R3 PLUS
200
250
О
О
DQR324400
Q Bit 24mm x 400mm
R3 PLUS
400
450
О
О
DQR325400
Q Bit 25mm x 400mm
R3 PLUS
400
450
О
О
DQR326400
Q Bit 26mm x 400mm
R3 PLUS
400
450
О
О
Fasteners & Tools
Carbide drill bits can be identified by the small spline (1/2” shaft) and 2 runner slots.
Range convertising to a SDSPlus drive in late 2012.
81
FASTENERS & TOOLS
RAMSET CARBIDE DRILL BITS
Carbide Drill Bits - SDS MAX Plus
SDS MAX PLUS carbide drill bits identified by the large spline ø18mm having 3 runner slots.
Part No.
Description
Shank
Type
Working
Length
Total
Length
Use
with
DD565
Use
with
DD576
DDSM12200
12mm x 200 SDS MAX Y Drill Bit
MAX
200
340
О
О
DDSM14200
14mm x 200 SDS MAX Carbide 111600
MAX
200
340
О
О
DYSM16400
16mm x 400 SDS MAX Y Drill Bit
MAX
400
540
√
О
DYSM18200
18mm x 200mm Quatro 110040
MAX
200
340
√
О
DYSM18400
18mm x 400mm Quatro Drill Bit
MAX
400
540
√
О
DYSM20200
20mm x 200 SDS MAX Y Drill Bit
MAX
200
320
√
О
DYSM20400
20mm x 400 SDS MAX Y Drill Bit
MAX
400
520
√
О
DYSM22400
22mm x 200 SDS MAX Y Drill Bit
MAX
400
520
√
О
DYSM24400
24mm x 400mm SDS MAX Y Drill Bit
MAX
400
520
√
О
DYSM25400
25mm x 400 SDS MAX Y Drill Bit
MAX
400
520
√
√
DYSM26400
26mm x 400 SDS MAX Y Drill Bit
MAX
400
520
√
√
DYSM28450
28mm x 450 SDS MAX Y Drill Bit
MAX
450
570
√
√
DYSM32450
32mm x 450 SDS MAX Y Drill Bit
MAX
450
570
√
√
U3™ Series Carbide
R3 carbide drill bits able to drill through reinforced concrete with its tricutter carbide head.
Part No.
Diameter
Working Length
Overall
Length
Shank Type
DDU305050
5
50mm
110mm
R3 PLUS
DDU305100
5
100mm
160mm
R3 PLUS
DDU306050
6
50mm
110mm
R3 PLUS
DDU306100
6
100mm
160mm
R3 PLUS
DDU306150
6
150mm
210mm
R3 PLUS
DDU306050X3
6.5
50mm
110mm
R3 PLUS
DDU306100X3
6.5
100mm
160mm
R3 PLUS
DDU306150X3
6.5
150mm
210mm
R3 PLUS
DDU3070100
8
100mm
160mm
R3 PLUS
DDU3080100
8
100mm
160mm
R3 PLUS
DDU308150
8
150m
210mm
R3 PLUS
DDU310100
10
100mm
160mm
R3 PLUS
DDU310200
10
200mm
260mm
R3 PLUS
DDU312125
12
150mm
210mm
R3 PLUS
DDU312250
12
250mm
310mm
R3 PLUS
DDU314200
14
200mm
250mm
R3 PLUS
DDU316200
16
200mm
250mm
R3 PLUS
Range convertising to a SDSPlus drive in late 2012.
Ph 0800 88 22 12
82
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
use
with
DD665
Use
with
DD610
FASTENERS & TOOLS
dd544 rotary hammer
The Ramset DD544 rotary hammer is a rugged, high performance medium duty
drilling machine capable of drilling into a variety of materials as well as light
duty chiselling and chasing into masonry. Featuring Ramset Vibration Control
(RVC) the DD544 is safe for extended work periods.
FEATURES AND BENEFITS
•
•
•
•
•
Vibration damping mechanism for super smooth operation
Quick lock keyless bit exchange
Electro pneumatic impact mechanism
In-built safety clutch providing operator protection
180° adjustable side handle for left and right handed use
dd576 rotary combi-hammer
The Ramset DD576 is a versatile multiple use rotary hammer that
can handle the toughest drilling and coring tasks with ease. The
switch to chiselling introduces “Turbo-Power”, an increase of 20% in
performance, delivering an impressive 15 joules, making the DD576
capable of superior material removal for extra heavy duty chasing and
chiselling.
FEATURES AND BENEFITS
Quick lock keyless SDS-MAX
Electro pneumatic impact mechanism
Ergonomically designed for safety and fatigue free operation
“the ideal tool for those who want consistent hard
work from a tool that can take it”
new
CRHR28 cordless rotary
hammer drill
Fasteners & Tools
•
•
•
Powerful Ramset 28V cordless rotary hammer delivers corded tool
performance for a variety of concrete drilling applications.
FEATURES AND BENEFITS
•
•
•
•
•
High quality, large capacity battery pack for excellent
performance
L-shaped construction for perfect balance and control
4 mode - drilling, hammer drilling, chiselling and neutral
All metal gearbox for durability
High speed / maximum impact with a safety clutch
83
FASTENERS & TOOLS
Chemset™ Chemical Anchoring
Chemset Stud Anchors
Part No.
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
Galvanised for exterior resistance 42 micron Hot Dip Galvanised coating
CS10130GH 10mm
90mm
130mm
ea
CS12160GH 12mm
110mm
160mm
ea
CS16190GH 16mm
125mm
190mm
ea
CS20260GH 20mm
150mm
260mm
ea
CS24300GH 24mm
160mm
300mm
ea
AISI 316 (A4) Stainless Steel for superior corrosion resistance
CS10130SS
10mm
90mm
130mm
ea
CS12160SS
12mm
110mm
160mm
ea
CS16190SS
16mm
125mm
190mm
ea
CS20260SS
20mm
150mm
260mm
ea
Chemset Maxima Spin Capsules
Part No.
To Suit
Anchor
Size
Nominal
Dia.
Capsule
Length
Qty
(per box)
CHEM12
M12
13mm
95mm
ea
CHEM16
M16
17mm
95mm
ea
CHEM2024
M20
21.5mm
115mm
ea
Accessories
Part No.
To Suit
Hole Size
Description
Qty
(per box)
HCBT13
10-14mm
Cleaning Brush
ea
HCBT20
18-22mm
Cleaning Brush
ea
HCBT26
22-26mm
Cleaning Brush
ea
S065990
-
Hole Cleaning Pump/Blower
ea
Ph 0800 88 22 12
84
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
Chemset™ Allthread Rod
Chemset Allthread Rod
Part No.
Thread
Size
Thread
Length
Qty
(per box)
Zinc
RTRM06L1
M6
1000mm
ea
RTRM08L1
M8
1000mm
ea
RTRM10L1
M10
1000mm
ea
RTRM10L3
M10
3000mm
ea
RTRM12L1
M12
1000mm
ea
RTRM12L3
M12
3000mm
ea
RTRM16L1
M16
1000mm
ea
RTRM20L1
M20
1000mm
ea
RTRM24L1
M24
1000mm
ea
M10
1000mm
ea
Galvanised
RTRM10L1GH
RTRM12L1GH
M12
1000mm
ea
RTRM16L1GH
M16
1000mm
ea
RTRM20L1GH
M20
1000mm
ea
RTRM24L1GH
M24
1000mm
ea
M6
1000mm
ea
AA316
RTRM06L1SS
RTRM10L1SS
M10
1000mm
ea
RTRM12L1SS
M12
1000mm
ea
RTRM16L1SS
M16
1000mm
ea
RTRM20L1SS
M20
1000mm
ea
Part No.
Thread
Size
Thread
Length
Qty
(per box)
RTCM10
M10
30mm
ea
RTCM12
M12
36mm
ea
Fasteners & Tools
Chemset Allthread Couplings - zinc
• For use with threaded road and PA threaded studs.
85
FASTENERS & TOOLS
Dynaset™ Drop In Anchors
Dynaset Drop In Anchors
Part No.
Anchor
Size
Drill/Anch
or Dia.
Min Hole
Depth
Anchor
Length
Qty
(per box)
Zinc
DSM06
M6
8mm
23mm
25mm
100
DSM08
M8
10mm
28mm
30mm
100
DSM10
M10
12mm
38mm
40mm
50
DSF10
M10 (Flanged) 12mm
28mm
30mm
50
DSM12
M12
16mm
48mm
50mm
50
DSM16
M16
20mm
63mm
65mm
25
DSM20
M20
24mm
78mm
80mm
25
8mm
23mm
25mm
100
Stainless Steel 316
DSM06SS
M6
DSM08SS
M8
10mm
28mm
30mm
50
DSM10SS
M10
12mm
38mm
40mm
50
DSM12SS
M12
16mm
48mm
50mm
50
DSM16SS
M16
20mm
63mm
60mm
20
Dynaset Setting Tools
Part No.
Anchor
Size
Description
SETDS1
M6
Dynaset Std Punch 6mm
ea
SETDS2
M8
Dynaset Std Punch 8mm
ea
SETDF3
M10F
Dynaset Std Punch 10mm
ea
SETDS3
M10
Dynaset Std Punch 10mm
ea
SETDS4
M12
Dynaset Std Punch 12mm
ea
SETDS5
M16
Dynaset Std Punch 16mm
ea
SETDS6
M20
Dynaset Std Punch 20mm
ea
Ph 0800 88 22 12
86
Qty
(per box)
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
REID CHEMICAL FASTENING
RIC500A is a two component, 10:1 ratio acrylic based adhesive for use as a high strength, anchor grouting material.
RIC500A is able to cure under humid conditions and bond to damp surfaces. Resin and initiator are dispensed and mixed
simultaneously through the mixing nozzle. RIC500A has been tested and meets the requirements of ASTM881/99; Type IV,
Grade III, Class A, B & C, with the exception of gel time and epoxy content. Dispenses at low temperatures.
Cartridge
Size
RIC500A-825 825 ml
Description
High strength, all temperature acrylic tie
adhesive, with static mixer
Qty
(per box)
ea
E55
Nozzle
ea
A102NZ
Applicator Tool
ea
Fasteners & Tools
Part No.
SwiftChem
Polyester chemical anchor system. The two parts are mixed in one action
through a static nozzle. Can be used in solid concrete or brick / block
anchoring. Come with one nozzle.
Part No.
SWCHEM
Cartridge
Size
Description
Qty
(per box)
380 ml
SwiftChem (comes with one nozzel)
ea
ISNP
-
Mixer Nozzle for 100 Series (C101C)
ea
CUA
-
Applicator Tool C101C Plus & SwiftChem
ea
ISM12
-
12mm Mesh Sleeve
ea
ISM16
-
16mm Mesh Sleeve
ea
87
FASTENERS & TOOLS
ramset CHEMICAL FASTENING
Chemset Injection 101 Plus Series
Chemset Injection 101 Plus Series is a polyester chemical anchor system. The
two parts are mixed in one action through a static nozzle. Chemset can be
used in solid concrete or brick / block anchoring. Note the new formulation is
Styrene Free and can be used where a Green Star rating is required.
Part No.
Cartridge
Size
C101C
SWCHEM
Description
Qty
(per box)
380 ml
Chemset 101 Plus Cartridge
ea
380 ml
SwiftChem (comes with one nozzel)
ea
ISKP
2 x 380 ml
ISNP
-
Chemset 101 Plus Injection System Kit
ea
Mixer Nozzle for 100 Series (C101C)
ea
CUA
-
Applicator Tool C101C Plus & SwiftChem
ea
ISM12
-
12mm Mesh Sleeve
ea
ISM16
-
16mm Mesh Sleeve
ea
Chemset A7 Ultra
Chemset A7 Ultra is an acrylic based adhesive used for high strength
applications. Suitable for colder environments, A7 Ultra is resistant to cyclic
loading and vibration. A7-10 dispenses using a standard caulking gun.
Part No.
Cartridge
Description
Qty
Size
(per box)
A7-28
825 ml
Ultra A7 Cartridge
ea
E55
-
Ultra A7 Nozzles
ea
A102NZ
-
A7-28 Applicator Tool
ea
A200
-
A7-28 Pneumatic Tool
ea
A7-10
275 ml
A7-10 Cartridge use with CUA Tool
ea
A24
-
A7-10 Nozzles
ea
ISM12
-
12mm Mesh Sleeve
ea
ISM16
-
16mm Mesh Sleeve
Epcon C6 Series
Epcon C6 is an epoxy mortar adhesive used for high strength applications.
This product is not suitable in cold conditions. Epcon C6 is resistant to cyclic
loading and vibration. Can also be used in underwater situations.
Part No.
C6-18
Cartridge
Size
530 ml
Description
Qty
(per box)
C6-18 Cartridge
ea
E101NZ
-
C6-18 Applicator Tool (Double Barrel)
ea
E24XL
-
C6-18 9.5mm Nozzles
ea
ISM12
-
12mm Mesh Sleeve
ea
16mm Mesh Sleeve
ea
ISM16
For technical information on cure times, loadings and installation instructions, refer to the Reid
website www.reids.co.nz.
Ph 0800 88 22 12
88
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
new
* STYRENE FREE
* LOW ODOUR
8
Extreme Performance Epoxy Resin
FASTENERS & TOOLS
Epcon C8 Extreme
formulated for extreme
and stud applications. With virtually no
chemset
c8rebarextreme
smell Epcon C8 is easy to inject at low temperatures and is approved
The Epcon C8 Extreme performance epoxy resin has been specifically
new
use in C8
wetExtreme
and diamond
drilled
holes.
Thefor
Chemset
performance
epoxy
resin has been specifically
formulated
for
extreme
rebar
and
stud
applications.
virtually
no smell,
This new formulation resin has no unpleasantWith
odour
making
it ideal for
Chemset
C8
is
easy
to
inject
at
low
temperatures
and
is
approved
for
use in wet
indoor applications.
and diamond drilled holes. Suitable for indoor applications.
NEW Epcon C8
Extreme Performance Epoxy Resin
Features & Benefits
NO
• Suitable for use in oversized holes
• Easy to inject at low temperatures
unpleasant
• Reliable performance at high temperature: 100%
performance at 60 °C, 70% performance at 80 °C
Information
Resin with Maxima Rod Max. Anchor Max. Fixture Min. thickness Ø Thread
Thickness Base Material
Drilling
Depth
Ø Drill
bit
Total
Length
Max. Tightening
Torque
Eurocode
EpconC8M8
80mm
15mm
120mm
EpconC8M16
125mm
35mm
175mm
EpconC8M30
280mm
70mm
340mm
80mm
90mm
110mm
125mm
170mm
210mm
280mm
10mm
12mm
14mm
18mm
25mm
28mm
35mm
110mm
130mm
160mm
190mm
260mm
300mm
380mm
10Nm
20Nm
30Nm
60Nm
120Nm
200Nm
400Nm
050950
050960
050970
050980
655220
655240
050940
• (Zinc
Phenol
and
Styrene free
Coated
Steel)
Depth
• EpconC8M10
Two year shelf life: reduces
associated130mm
90mm risks20mm
with holding stock 110mm
EpconC8M12
25mm
160mm
• EpconC8M20
450ml cartridge: a perfect
170mmcompromise
65mm
220mm
EpconC8M24
63mmneed 270mm
between weight, size210mm
and application
• Extreme Performance Injection Tool: reduces effort
required for application by applying force of up to
500kg to the resin cartridge.
Technical Information
Minimal Shrinkage:
Shore hardness:
Compressive strength:
High bond strength:
Applications
Suitable
for extreme applications
including:
Part
No
Description
• Diamonddrilling
C8-450
Chemset C8 Extreme Cartridge 450ml
•Wetholes
•Rebar(upto32mmdiameter)
S055837
Hi Flowing Mixing Nozzle
•Threadedstud
E102
8mm
10mm
12mm
16mm
20mm
24mm
30mm
0.05%
85
115 N/mm2
20N/mm2
Approvals
The new Epcon C8 is the first resin to achieve
an ETA for rebar applications.
Hand Gun
Water Regulations Advisory Scheme (WRAS)
approved for the maintenance or installation
of water treatment systems and associated
applications. Approval number 0901501.
Fasteners & Tools
Epcon
C8 Product
•Spit
Virtually
no odour
or smell
ODOUR
www.itwcp.co.uk
FIRE
CSTB fire tested.
Freephone Orderline: 0800TESTED
833 381
Freephone Technical Helpline: 0800 731 4924
NF approved (6 months sustained load of
30KN in humid conditions with a maximum
displacement of 0.6mm).
Tool and Accessories
Eurocode Description
050085
050067
List Price List Price
£
€
Epcon C8 Cartridge (450ml)
+ 1 Nozzle + 1 Extension
Manual Injection Tool
28.11
36.54
151.61
197.09
89
www.itwcp.co.uk
FASTENERS & TOOLS
powder fixing
new
Spitfire Indirect Acting Tool
The Spitfire tool now has a new 75mm magazine
and is able to fire 75mm pins.
75mm MAGAZINE to
fire 75mm Pins
FEATURES AND BENEFITS
•
•
•
•
•
Accessory
Product
Code
Length
Qty
(per box)
LDU25
25mm
100
LDU42
42mm
100
LDU50
50mm
100
LDU65
65mm
100
LDU75
75mm
100
LWU32
32mm
100
LWU75
75mm
100
032510
20mm
100
032930
30mm
100
032920
40mm
100
032910
50mm
100
032900
60mm
100
032890
70mm
100
Single Pins
Accessory
Automatic piston return provides rapid firing in
either magazine or single shot mode.
A 10 pin magazine provides the ability to fire a pin
every second.
Simple disassembly and easy maintenance means
less down time
Power adjustment can be changed without
changing power load or nail length.
Now comes with a 75mm magazine enabling firing
into thicker material with a 75mm pin.
Product
Code
Details
Qty
(per box)
PLDYW25S
Yellow (Medium)
100
PLDRD25S
Red (Strong)
100
Disc Power Loads
Washered Pins
Hard Steel & Concrete Pins
Collated Pins
S011340
15mm
100
S011341
20mm
100
S011342
25mm
100
S011343
30mm
100
S011344
35mm
100
S011345
40mm
100
S011346
50mm
100
S011347
60mm
100
S011348
75mm
100
Ph 0800 88 22 12
90
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
Diamond cutting blades
Order No.
Diameter
Blade Type
GC127LS
127mm
Wet & dry saw blade for old
cured concrete
Wet & dry cutting of hard
materials
GC127TS
GC230LS
230mm
Wet & dry saw blade for old
cured concrete
GC230TS
230mm
Wet & dry cutting of hard
materials
230mm
Wet & dry cutting of green
concrete & soft materials
230mm
An economical blade for brick,
block & pavers
GC230LSG
GC230LSE
Steel &
Concrete
Cutting and
Grinding
Metal grinding wheels
Order No.
Size
GA127SGU7
127 x 6 x 22mm
GA230SGU7
230 x 6 x 22mm
Cup grinding wheels
GCW105DR
GCW105SR
Diameter
Blade Type
105mm
Double Rim - grinding
wheel (general purpose)
105mm
Single Rim - grinding
wheel (general purpose)
Metal Cut off wheels
Order No.
Size
GA100-1.0
100 x 1 x 16mm
GA115-1.0
115 x 1 x 22mm
127 x 1 x 22mm
105mm
Single Rim - grinding
wheel (finishing)
GA127-1.0
GA127SCU7
127 x 2.5 x 22mm
GSW125DR
125mmi
Double Rim - grinding
wheel (general purpose)
GA230SCU7
230 x 2.5 x 22mm
305 x 2.5 x 22mm
GCW125SR
125mm
Single Rim - grinding
wheel (general purpose)
GA305SC25
GCW125FW
125mm
Single Rim - grinding
wheel (finishing)
GCW125TSW
125mm
12 segment - for paints
& sticky materials
GCW180DR
180mm
Double Rim - grinding
wheel (general purpose)
GCW180FW
180mm
Single Rim - grinding
wheel (finishing)
Masonry cup stones
GCW180TCW
180mm
Angle 12 Segment - for
paints & sticky materials
Order No.
Angle 5 Segment - for
paints & sticky materials
SG 01
110 x 55 x M14
SGCT1002
130 x 55 x M14
GCW105FW
GCW180TSW
180mm
Masonry cut off wheels
Order No.
GA230MCU7
Size
230 x 2.5 x 22mm
Fasteners & Tools
Order No.
Size
Please refer to page 24 of the “RAMSET TOOL CATALOGUE”
for detailed product code descriptions, available from your local
Reid™ Representative.
91
FASTENERS & TOOLS
new
RGP230AV 9” angle grinder
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
•
Input power 2400W
Anti vibration back handle and Auxilary handle
Patented dust system for better dust evacuation
Rotatable back handle
D-handle available
One touch guard wheel
Anti-noise gear cover, quietest grinder for its size
Two spirit levels vertical and horizontal
5 metre cable
RGP125AV 5” angle grinder
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
Input power 1400W
Anti vibration auxilary handle
Speed control
Patented dust system for better dust evacuation
Soft Starter
One touch guard wheel
Two spirit levels vertical and horizontal
4 metre cable
Ph 0800 88 22 12
92
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
FASTENERS & TOOLS
RL300 rotary laser level
Fully automatic horizontal and vertical laser. Compact
ergonomic design and intuitive operation. A multifunctional laser for interior and exterior applications.
An ideal choice when accuracy, reliability and durability
are central to your requirements.
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
Visible laser beam, high accuracy +/- 1.5mm @ 30mm
Li-Ion battery technology, intelligent charger
Combine manual and automatic slope setting in
two axes
Two rotating speeds
Variable scanning functions – both the scan range
and scan direction can be adjusted
Permanent 90° plumb beam
TILT alarm function
Operation with rechargeable or alkaline batteries
RL1600-50L wet & dry vacuum
Industrial quality vacuum unit for pwerful dust and
water extraction.
•
•
•
•
•
•
On board storage for accessories
Simple controls for suction power and filter control
Automatic vibrator
Top quality, made of speical shock resistant plastic
Lightweight only 11.6kg’s
230 volt, 1600 watt
Fasteners & Tools
FEATURES AND BENEFITS
93
FASTENERS & TOOLS
rm160 diamond drilling motor
FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
3 speed motor with progressive start
Handle mounted beneath the motor making the
tool shorter and more ergonomic
Led indicator light to ensure correct pressure
Two spirit levels Vertical and horizontal
Can be neck mounted on rig (universal 60mm)
Can be block mounted on rigs (dovetail)
Built in horizontal and vertical spirit levels
Fitted with PRCD IP55 10mA
TRIX160 diamond rig
FEATURES AND BENEFITS
•
•
•
•
•
•
Robust rig with integrated vacuum plate
3-point footplate suited for use with a quick strainer, vacuum set or standard
(to drill upside down)
Tool connection with quick release coupling: no extra tools necessary to
mount the machine
1 capstan wheel that can be placed both sides of the rig, it is also used to fix
the column and the motor attachment
Scale indication of lateral depth and tilt angle
Ergonomic soft grip transport handle
rm250 diamond drilling motor
FEATURES AND BENEFITS
•
•
•
•
•
•
•
Suits Rig TRIX250 and TRIX160
Fitted with PRCD IP55 10mA
2 speed for optimum drilling across all sizes
Thermal protection and mechanical clutch
Oil lubrication with pump for overhead applications
Comfort design
2500W motor giving high torque ensuring efficient core
trix250 diamond rig
FEATURES AND BENEFITS
•
•
•
•
•
•
Ph 0800 88 22 12
94
Robust rig with integrated vacuum plate
3-point footplate suited for use with a quick strainer, vacuum set or standard
(to drill upside down)
Tool connection with quick release coupling: no extra tools necessary to
mount the machine
1 capstan wheel that can be placed both sides of the rig, it is also used to fix
the column and the motor attachment
Scale indication of lateral depth and tilt angle
Ergonomic soft grip transport handle
www.reids.co.nz
Range effective Jan 2012. ReidTM reserves the right to adjust range without notification. For more up-to-date details visit our website.
© Copyright Reid™ Construction Systems. All rights reserved. Version: 01/12/11. This supersedes all previous versions.
reid product literature
Reid supply a range of product literature to aid specification of our range of
products. Please contact us on info@reids.co.nz and request your copy now.
reidbar threaded reinforcing system design guide
metric threaded insert design guide
nirvana insulated concrete panels design guide
panel to panel connection - reid channel design brochure
reid formwork systems and release agents brochure
REID FORMLINERS FOR PATTERNED CONCRETE DESIGN GUIDE
mechanical and chemical fastening SYSTEMS
flexus “bendable concrete” technology specification folder
Get a QR Code App:
iPhone: QR Reader from iTunes
Bllackberry: Mobile Tag from m.mobiletag.com
Android: Pre-installed Barcode Scanner app on
your phone.
Social Media Network
95
p: 0800 88 22 12
f:
0800 88 22 55
e:sales@reids.co.nz
contact details
Reid National Branches
Head Office
23-27 Poland Road,
Glenfield
p0800 88 22 12
f 0800 88 22 55
esales@reids.co.nz
Hamilton
21A Kaimiro Street,
Te Rapa
p07 849 0643
f 07 849 0642
ehamilton@reids.co.nz
Tauranga - Mt
Maunganui
Unit 1, 15 Portside Drive
p07 575 7250
f 07 575 7259
etauranga@reids.co.nz
Lower Hutt
46 Victoria St,
Alicetown
p021 790 979
f 04 568 0098
epetez@reids.co.nz
Christchurch
7 O'Shannesey Place,
Addington
p03 338 3844
f 03 338 8846
echristchurch@reids.co.nz
Get a QR Code App:
iPhone: QR Reader from iTunes
Bllackberry: Mobile Tag from m.mobiletag.com
Android: Pre-installed Barcode Scanner app on
your phone.
Social Media Network
Ramset Trade Centres
Auckland - Albany
5J Miro Place, Albany
p09 447 1296
f 09 447 1297
ealbany@ramset.co.nz
Tauranga - Mt Maunganui
Unit 1, 15 Portside Drive
p07 572 0520
f 07 572 0530
etauranga@ramset.co.nz
Wellington
147 Taranaki St
p 04 384 4138
f 04 385 0868
ewellington@ramset.co.nz
Auckland - Penrose
35 Station Rd
p09 579 3072
f 09 579 1701
eauckland@ramset.co.nz
Rotorua
Waterford Park Estate
50 Old Taupo Rd
p07 348 0190
f 07 348 9200
erotorua@ramset.co.nz
Nelson
p 03 548 2664
f 03 548 3559
enelson@ramset.co.nz
Auckland - Henderson
123 Central Park Drive
p09 838 9865
f 09 837 3014
ehenderson@ramset.co.nz
New Plymouth
p06 759 8984
f 06 759 8983
enewplymouth@ramset.co.nz
Auckland - East Tamaki
Unit 1, 333 East Tamaki Road
p09 272 4701
f 09 272 4703
eeasttamaki@ramset.co.nz
Palmerston North
903 Tremaine Avenue
p06 357 6745
f 06 357 6775
epalmerstonnorth@ramset.co.nz
Whangarei
2A Herekino St
p09 438 2010
f 09 438 9188
ewhangarei@ramset.co.nz
Napier - Onekawa
124 Taradale Road
p06 843 0067
f 06 843 0043
enapier@ramset.co.nz
Hamilton
15 Somerset St
p07 847 9047
f 07 847 9980
ehamilton@ramset.co.nz
Lower Hutt
46 Victoria St
p04 569 7247
f 04 566 8752
elowerhutt@ramset.co.nz
Christchurch - Riccarton
7 O'Shannesey Place
p 03 341 8710
f 03 341 8730
echristchurch@ramset.co.nz
Christcurch - Hornby
Unit 2/37 Foremans Rd
p 03 349 4749
f 03 349 4750
ehornby@ramset.co.nz
Dunedin
5 Melbourne St
p 03 455 1134
f 03 456 1388
edunedin@ramset.co.nz
Invercargill
121 Clyde St
p 03 218 9241
f 03 214 7787
einvercargill@ramset.co.nz
Queenstown
200A Glenda Dr
p 03 442 8073
f 03 442 8074
equeenstown@ramset.co.nz
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising