Wireless Sound Bar

ENGLISH
SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
MODEL
SJ4Y
*MFL69710421*
www.lg.com
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
FCC Compliance Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and the
receiver.
yy Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
yy Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation
of the device. Any changes or modifications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure Statement : This equipment
complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.
FCC Radio Frequency Interference Requirements :
High power radars are allocated as primary users of the
5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage
this device. This device cannot be co-located with any other
transmitter.
Responsible Party :
LG Electronics USA, Inc.
1000 Sylvan Ave
Englewood Cliffs, NJ 07632
Tel: 1-800-243-0000
Front Panel
The buttons are located on the rear.
1
Subwoofer Connection
Place the wireless subwoofer near the speaker and
follow steps below.
a Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b Turn on the main unit :
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Standby / On
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · · Adjusts Volume
Rear Panel
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to
connect manually.
aPress Pairing button on the rear of the wireless
subwoofer.
yy The green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the main unit.
c Pairing is completed.
DC IN · · · · · · · · · · · · · · · · · Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN · · · · · · · · · Connect to a Portable device
USB
· · · · · · · · · · · · · · · · · · Connect to a USB device
HDMI OUT (TV ARC) · · · · · · · · · · · · · · Connect to a TV
HDMI IN · · · · · · · · · · Connect to HDMI out on a device
yy The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from certain devices (ex. wireless router,
microwave oven, etc.) over 1m (3.28 ft) to
prevent wireless interference.
3.28 ft
>1m
2
TV Connection
Remote control
Connect with the Sound Bar and TV using
Optical ( ) or HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
ASC/BASS BLAST/CINEMA: Selects the sound effect.
REAR LEVEL +/-: Adjusts the volume level of rear
speakers. (For rear speakers)
WOOFER LEVEL +/-: Adjusts the volume level of
HDMI(ARC) Connection
subwoofer.
a Connect the sound bar to the TV using
HDMI cable.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
TV
yy HDMI connection is unavailable if your TV
does not support HDMI ARC.
yy If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal has a
higher priority.
Additional Device Connection
a Connect to the external device as follows.
(Set-top Box,
Player etc.)
TV
OR
b Set the input source by pressing F on the remote
control or unit repeatedly.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Battery Replacement
Additional Information
Specification
Power
consumption
Refer to the main label.
AC adapter
yy Model : DA-38A25
yy Manufacturer : Asian Power
Devices Inc.
yy Input :
100 - 240 V ~ 50 - 60 Hz
1.2 A
yy Output : 25 V 0 1.52 A
Dimensions
(W x H x D)
Approx.
890 mm x 55 mm x 85 mm
(35 inches x 2.17 inches x 3.35
inches) With foot
Bus Power
Supply (USB)
5 V 0 500 mA
Amplifier (Total
RMS Output
power)
300 W RMS
Design and specifications are subject to change
without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers
Kit sold separately. (SPJ4-S)
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping
and handling) upon email request to opensource@lge.
com. This offer is valid for three (3) years from the date
on which you purchased the product.
LG Customer Information Center
1-800-243-0000
1-888-865-3026
USA, Consumer
USA, Commercial
Register your product Online!
www.lg.com
Printed in China