Home Audio System
4-464-274-12 (1)
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However,
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Location of Controls
Unit (Front)
Playing a CD-DA/MP3 disc
1 Press CD FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly until “CD”
appears in the display .
Music discs encoded with copyright
protection technologies
Home Audio System
2 Press the  (open/close) button  to open
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware
that among those discs, there are some that do
not conform to the CD standard and may not be
playable by this product.
GB Operating Instructions
* This include folders that have no MP3 or other files. The
number of folders that the system can recognize may
be less than actual number of folders, depending on the
folder structure.
Operations
the disc tray .
3 Load a disc with the label side facing up.
Label side
(printed side)
©2013 Sony Corporation
Printed in China
CMT-SBT100/SBT100B
For customers in Europe and Australia
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
WARNING
To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame
sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the appliance.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
The unit is not disconnected from the mains as
long as it is connected to the AC outlet, even if the
unit itself has been turned off.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
This equipment has been tested and found to
comply with the limits set out in the EMC Directive
using a connection cable shorter than 3 meters.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
This appliance is
classified as a CLASS
1 LASER product. This
marking is located on
the rear exterior of the
unit.
For customers in Australia
This equipment should be installed and operated
with at least 20 cm and more between the
radiator and person’s body (excluding extremities:
hands, wrists, feet and ankles).
For customers in Europe
Properly shielded and grounded cables and
connectors must be used for connection to host
computers and/or peripherals.
Notice for customers: the following
information is only applicable to
equipment sold in countries applying
EU directives.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan Minatoku Tokyo, 108-0075 Japan. Inquiries related to
product compliance based on European Union
legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters, please refer
to the addresses provided in the separate service
or guarantee documents.
Hereby, Sony Corp., declares that this equipment
is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/
EC.
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. The recycling of
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic Office,
your household waste disposal service or the
shop where you purchased the product.
FUNCTION  on the unit repeatedly until “CD”
appears in the display .
2 Press PLAY MODE  repeatedly until “PGM”
appears while the player is stopped.
3 Select a folder (MP3 disc only).
4 Select the desired track or file number.
Tip
When you use headphones, connect to  (headphone) jack .
Remote
Press /  repeatedly until the desired
track or file number appears.
This manual mainly explains operations using
the remote, but the same operations can also be
performed using the buttons on the unit having
the same or similar names.
To use the remote
Slide and remove the battery compartment lid,
and insert the two supplied R6 (size AA) batteries,
 side first, matching the polarities shown below.
Notes on using the remote
ˎWith
ˎ
normal use, the batteries should last for about 6
months.
ˎDo
ˎ not mix an old battery with a new one or mix different
types of batteries.
ˎIf
ˎ you do not use the remote for a long period of time,
remove the batteries to avoid damage from battery leakage
and corrosion.
Getting Started
Rear of the speaker
red 
Selected track
or file number
4 Press the  (open/close) button  to close
the disc tray .
5 Press  (play/pause) button .
Playback starts.
ˎIf
ˎ you cannot remove the disc and “LOCKED” appears in the
display , contact your nearest Sony dealer.
ˎDo
ˎ not load a disc with non-standard shapes (e.g., heart,
square, star). Doing this may cause irreparable damage to
the system.
ˎDo
ˎ not use a disc with tape, stickers or paste on it as this
may cause malfunction.
ˎWhen
ˎ
you remove a disc, do not touch the surface of the
disc.
Other operations
To
Do the following:
Pause playback
Press  . To resume play,
press the button again.
Stop playback
Press  .
Select a track
or file
Find a point in a
track or file
Press / .
Select Repeat
Play
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
Hold down /  (or
/  on the unit)
during playback, and release
the button at the desired point.
Press REPEAT  repeatedly
until “ ” (all tracks of files)
or “ 1” (single track or file)
appears.
Select a folder on Press
+/  repeatedly.
an MP3 disc
Remove a disc
Press   on the unit.
To change the play mode
Press PLAY MODE  repeatedly while the player
is stopped. You can select Normal Play mode (no
indication or “FLDR”* appears), Shuffle Play mode
(“SHUF” or “FLDR SHUF”* appears), or Program
Play mode (“PGM” appears).
Play mode
After all equipments are connected, connect the
power cord  to the wall outlet.
 Speakers (left/right) connectors
Firmly connect the right speaker cord  to R, and
the left speaker cord  to L.
 AUDIO IN (external input) jack
Connect optional external equipment with an
audio connecting cable (not supplied).
 Antennas
FM lead antenna (supplied) (CMT-SBT100 only)
AM loop antenna (supplied) (CMT-SBT100 only)
DAB/FM lead antenna (supplied) (CMTSBT100B only)
Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
Secure the end of the FM lead antenna with
adhesive tape.
To prepare the AM loop antenna
For details, please access the following URL:
http://www.compliance.sony.de/
Rewind an
antenna cord
wound around the
antenna and raise
the antenna stand.
Stand the
antenna and
secure it to the
slit until it clicks.
Setting the clock
1 Press   to turn on the system.
2 Press TIMER MENU  to select the clock set
mode.
If “PLAY SET” flashes, press /  repeatedly
(enter) .
to select “CLOCK,” and then press
3 Press /  repeatedly to set the hour, then
press
(enter) .
4 Use the same procedure to set the minutes.
Note
The clock settings are reset when you disconnect the power
cord or if a power failure occurs.
To display the clock when the system is off
Press DISPLAY  repeatedly to display the clock.
The clock is displayed for about 8 seconds.
If the system is in BLUETOOTH Standby mode, the
clock does not appear by pressing DISPLAY .
Reception of DAB/DAB+ radio station
(CMT-SBT100B only)
When you turn on the system for the first time
after you purchase the system, DAB Automatic
Scan starts automatically and creates a list of
available services. During the DAB Automatic
Scan, “” appears. Do not press any
button on the unit or the remote during DAB
Automatic Scan. Scanning is interrupted and
service list may not be created properly. To run
the DAB Automatic Scan manually, perform the
procedure of “Running the DAB Automatic Scan
manually (CMT-SBT100B only).” If you have moved
to another area, perform the DAB Automatic
Scan manually and re-register the contents of
broadcasts.
Attaching speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to prevent slipping.
Running the DAB Automatic Scan
manually (CMT-SBT100B only)
Before you can tune in DAB/DAB+ stations, you
must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to update
the DAB/DAB+ service information.
1 Press TUNER FUNCTION  on the remote or
press FUNCTION  on the unit repeatedly
until “DAB” appears in the display .
2 Press OPTIONS  to display the setting menu.
3 Press /  repeatedly to select “INITIAL,”
then press
5 Press
press .
Scanning begins. The scanning progress is
indicated by asterisks (*******). Depending on
the DAB/DAB+ services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of available
services is created.
.
“--.--” appears when the total playing time
exceeds 100 minutes for an CD-DA or when you
program an MP3 files.
6 Repeat steps 3 through 5 to program
additional tracks or files, up to a total of 25
tracks or files.
* When “FLDR” or “FLDR SHUF” appears, all the files in the
selected folder on the MP3 disc will be played. When
playing a CD-DA disc, the system performs the same
operation as Normal Play (no indication) or Shuffle Play
“SHUF.”
Note on the play mode
If the power cord is disconnected when the
system is on, the play mode returns to Normal
Play.
Notes on Repeat Play
ˎ“ˎ ” indicates that all tracks or files will be repeated until
you stop playback.
ˎ“ˎ
1” indicates that a single track or file will be repeated
until you stop playback.
ˎIf
ˎ the power cord is disconnected when the system is on,
Repeat Play is cancelled.
Notes on Shuffle Play mode
ˎWhen
ˎ
Shuffle Play mode is set to “SHUF,” the system
shuffle-plays all tracks or files on the disc. When Shuffle
Play mode is set to “FLDR SHUF,” the system shuffle-plays all
tracks or files in selected folder.
ˎWhen
ˎ
you turn off the system, the selected Shuffle Play
mode (“SHUF” or “FLDR SHUF”) is cleared and the play mode
returns to Normal or FLDR Play mode.
Notes on playing MP3 discs
ˎDo
ˎ not save unnecessary folders or files on a disc that has
MP3 files.
ˎFolders
ˎ
that have no MP3 files are not recognized on the
system.
ˎThe
ˎ
system can only play MP3 files that have a file extension
of “.mp3.”
ˎEven
ˎ
when file name has the “.mp3” file extension, if it is
not an audio MP3 file, playing this file may generate a loud
noise, which could cause damage of the system.
ˎThe
ˎ
maximum number of MP3 folders and files compatible
with this system is:
999* folders (including the root folder)
999 files
250 files in a single folder
8 folder levels (in the tree structure of files)
ˎCompatibility
ˎ
with all MP3 encoding/writing software, CD-R/
RW drive and recording device, and recording media cannot
be guaranteed. Incompatible MP3 discs may produce noise
or interrupted audio or may not play at all.
Notes
ˎIf
ˎ your country or region does not support DAB/DAB+
broadcast,“NO SERV” appears.
ˎThis
ˎ
procedure clears all previously stored presets.
unplugging the DAB/FM lead antenna, make sure
ˎBefore
ˎ
the system is turned off to preserve your own DAB/DAB+
settings.
7 Press  .
Your program of tracks or files starts playback.
The programmed files or tracks remain
available until you remove the disc from the
disc tray  or unplug the power cord.
To play the same program again, press  .
Presetting radio stations
1 Tune in the desired station.
2 Press TUNER MEMORY .
Preset number
To cancel Program Play
Press PLAY MODE  repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or file of the
program
3 Press TUNE +/  repeatedly to select a
preset number.
If another station is already assigned to the
selected preset number, the station is replaced
by the new station.
Press CLEAR  while the player is stopped.
Notes
ˎIf
ˎ the disc is ejected after programming, all the programmed
tracks or files are deleted.
ˎIf
ˎ the power cord is disconnected when the system is on,
the programmed tracks or files are deleted.
4 Press
 to register the station.
“COMPLETE” appears in the display .
5 Repeat steps 1 through 4 to register other
stations.
You can preset up to 20 FM and 10 AM stations
(CMT-SBT100 only), or 20 DAB/DAB+ and 20 FM
stations (CMT-SBT100B only).
Listening to the radio
Tuning in a radio station
1 Press TUNER FUNCTION  on the remote or
press FUNCTION  on the unit repeatedly
until “TUNER FM” or “TUNER AM” appears
(CMT-SBT100), or “DAB” or “TUNER FM”
appears (CMT-SBT100B) in the display.
2 Perform tuning.
Press TUNING MODE  repeatedly until “AUTO”
appears, and then press TUNE +/ . Scanning
stops automatically when a station is tuned in,
and “STEREO” (for stereo programs only) appears
in the display .
When “PUSH STOP” appears
You cannot change the play mode during
playback. Stop playback then change the play
mode.
.
4 Press /  repeatedly to select “OK,” then
Total playing time
of the selected
track or file
For automatic scanning
 Power input (AC IN)
on the unit.
“STEP 9K” or “STEP 10K” appears in the display
. When you change the interval, all the AM
preset stations are erased.
 (open/close) 
Notes
Europe Only
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used
in combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
by inappropriate waste handling of the battery.
The recycling of the materials will help to conserve
natural resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only. To ensure that the battery will be
treated properly, hand over the product at endof-life to the applicable collection point for the
recycling of electrical and electronic equipment.
For all other batteries, please view the section
on how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal service
or the shop where you purchased the product.
1 Press CD FUNCTION  on the remote or press
+/   repeatedly to select the
Press
desired folder.
If you want to program all files in the folder,
.
press
License and Trademark Notice
ˎWindows
ˎ
Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
Layer-3 audio coding technology and
ˎMPEG
ˎ
patents licensed from Fraunhofer IIS and
Thomson.
ˎThe
ˎ
BLUETOOTH® word mark and logos are
registered trademarks owned by BLUETOOTH
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
ˎThe
ˎ
N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United States
and in other countries.
ˎAndroid
ˎ
is a trademark of Google Inc.
ˎThis
ˎ
product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
ˎThe
ˎ
system names and product names indicated
in this manual are generally the trademarks or
registered trademarks of the manufacturer. ™
and ® marks are omitted in this manual.
Creating your own program
(Program Play)
3 Press and hold FUNCTION  and press / 
If the scanning does not stop, press   to stop
scanning, then perform manual tuning (below).
When you tune in a station that provides RDS
services, information such as the service name or
station name is provided by broadcasts.
For manual tuning
Press TUNING MODE  repeatedly until
“MANUAL” appears, and then press TUNE +/ 
repeatedly to tune in the desired station.
Notes on DAB/DAB+ stations (CMTSBT100B only)
ˎBefore
ˎ
tuning in DAB/DAB+ stations, make sure that the
DAB Initial Scan has been performed.
ˎWhen
ˎ
you tune in a station that provides RDS services,
information such as the service name or station name is
provided by broadcasts.
ˎWhen
ˎ
tuning in a DAB/DAB+ station, it may take a few
seconds before you hear any sound.
ˎPrimary
ˎ
service is automatically received when secondary
service ends.
ˎThis
ˎ
tuner does not support data services.
To tune in to a preset radio station
Press TUNING MODE  repeatedly until “PRESET”
appears in the display , and then press TUNE
+/  to select the preset number to which the
desired station is registered.
Playing a file on a USB device
You can play audio files stored on a USB device by
connecting a USB memory or USB device to the
system. The playable audio format is MP3/WMA*/
AAC*.
Check the websites below for the information
about compatible USB devices.
For customers in Europe and Russia:
http://support.sony-europe.com/
For customers in Latin America:
http://www.sony-latin.com/index.crp
For customers in other countries/regions:
http://www.sony-asia.com/support
* Files with DRM (Digital Rights Management) copyright
protection or files downloaded from an online music store
cannot be played on this system. If you try to play one of
these files, the system plays the next unprotected audio
file.
To change the AM tuning interval
(except for European and Russian
models)
The default setting for AM tuning interval is 9 kHz
(or 10 kHz for some areas). Use the buttons on the
unit to perform this operation.
press FUNCTION  on the unit repeatedly
until “USB” appears in the display .
2 Connect the USB device directly or via the USB
cable supplied with the USB device to the USB
port  on the unit.
3 Press   to start playback.
Other operations
To
Do the following:
Pause playback
Press  . To resume play,
press the button again.
Stop playback
Press  . To resume play,
press   *1. To cancel
resume play, press  
again*2.
Select a folder
Press
Select a file
Press / .
Find a point in
a file
Hold down / 
(/  on the unit)
during playback, and release
the button at the desired point.
Select Repeat
Play
Press REPEAT  repeatedly
until “ ” (all audio files) or
“ 1” (single audio file) appears.
1 Press FUNCTION  on the unit repeatedly to
select the AM station.
2 Press /  to turn off the system.
To change the play mode
Press PLAY MODE  repeatedly while the player
is stopped. You can select Normal Play mode (no
indication or “FLDR” appears*1), or Shuffle Play
mode (“SHUF” or “FLDR SHUF” appears*2).
When no indication is selected, the system plays all files on
the USB device. When “FLDR” is selected, the system plays
all files in the selected folder on the USB device.
*2
When “SHUF” is selected, the system shuffle-plays all audio
files on the USB device. When “FLDR SHUF” is selected, the
system shuffle-plays all audio files in the selected folder.
*1
Note on the play mode
If the power cord is disconnected when the
system is on, the play mode returns to Normal
Play.
Notes on Repeat Play
ˎ“ˎ ” indicates that all files will be repeated until you stop
playback.
ˎ“ˎ
1” indicates that a single file will be repeated until you
stop playback.
ˎIf
ˎ the power cord is disconnected when the system is on,
Repeat Play is cancelled.
Note on Shuffle Play mode
When you turn off the system, the selected Shuffle Play
mode (“SHUF” or “FLDR SHUF”) is cleared and the play mode
returns to Normal Play mode (no indication or “FLDR”).
Notes
ˎThe
ˎ
playback order for the system may differ from the
playback order of the connected digital music player.
ˎBe
ˎ sure to turn off the system before removing the USB
device. Removing the USB device while the system is turned
on may corrupt the data on the USB device.
ˎWhen
ˎ
USB cable connection is necessary, connect the USB
cable supplied with the USB device to be connected. For
details on connection, refer to the operation manual of the
USB device.
ˎIt
ˎ may take time before “READING” appears after
connecting, depending on the type of USB device
connected.
ˎDo
ˎ not connect the USB device through a USB hub.
ˎWhen
ˎ
the USB device is connected, the system reads all the
files on the USB device. If there are many folders or files on
the USB device, it may take a long time to finish reading the
USB device.
ˎWith
ˎ
some connected USB devices, it may take a long time
to transmit signals from the system or to finish reading the
USB device.
ˎCompatibility
ˎ
with all encoding/writing software cannot be
guaranteed. If audio files on the USB device were originally
encoded with incompatible software, those files may
produce noise or ,may malfunction.
ˎThe
ˎ
maximum number of folders and files on the USB
device compatible with this system is:
1,000* folders (including the root folder)
3,000 files
250 files in a single folder
8 folder levels (in the tree structure of files)
* This includes folders that have no playable audio file and
empty folders. The number of folders that the system
can recognize may be less than actual number of folders,
depending on the folder structure.
+/   repeatedly.
ˎˎYou attempt to pair the system with more than
10 BLUETOOTH devices.
This system can pair with up to 9 BLUETOOTH
devices. If you pair another BLUETOOTH device
after pairing with 9 devices was performed,
pairing information of the device that was
connected with the system first is overwritten
with that of the new device.
ˎˎPairing registration information of this system is
erased from the connected device.
ˎˎIf you initialize the system or erase the
pairing history with the system, all the pairing
information will be erased.
About the BLUETOOTH indicator
The BLUETOOTH indicator in the center of the
BLUETOOTH button  allows checking of the
BLUETOOTH status.
System status
Indicator status
The system is in
Flashes slowly in blue.
BLUETOOTH Standby
(when the system is on).
During BLUETOOTH
Flashes quickly in blue.
pairing
The system is
Flashes in blue.
attempting to connect
with a BLUETOOTH
device.
The system has
Lit in blue.
established in
connection with a
BLUETOOTH device.
Enabling reception of AAC codec
You can receive data in AAC codec format from a
BLUETOOTH device. To enable reception, set up
using the option menu.
1 Press OPTIONS  to display the setting menu.
2 Press /  repeatedly to select “BT AAC,”
then press
.
3 Press /  repeatedly to select “ON” or
“OFF,” then press .
ON: to receive in AAC codec format
OFF: to receive in SBC codec format
Notes
ˎIf
ˎ you initiate setup during BLUETOOTH connection, the
connection is cut.
ˎWhen
ˎ
using an Apple product, update it to the latest
software version. For details on updating, refer to the
operation manual supplied with your Apple product.
ˎIf
ˎ sound is interrupted during reception in AAC codec
format, set the BT AAC menu to “OFF.”
Pairing the system with a BLUETOOTH
device
Connection example
ˎThe
ˎ
system does not necessarily support all the functions
provided in a connected USB device.
that have no audio files are not recognized.
ˎFolders
ˎ
ˎThe
ˎ
audio formats that you can listen to with this system are
as follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
AAC: file extension “.m4a,” “mp4” or “.3gp”
Note that even when file name has the correct file
extension, if the actual file differs, the system may produce
noise or may malfunction.
Charging a USB device or iPod/
iPhone/iPad
If you connect a USB device or iPod/iPhone/iPad
to the USB port  when the system is turned on,
charging begins automatically.
To stop charging the USB device
Press /  to turn off the system, and then
disconnect the USB cable.
Notes
ˎYou
ˎ
cannot charge the USB device or iPod/iPhone/iPad
when the system is off. Some USB devices and iPod/iPhone
may not be charged owing to their characteristics.
ˎIf
ˎ the system enters Standby mode during charging of a
USB device or iPod/iPhone/iPad, the charging stops in
progress. Before charging, turn off the Automatic Standby
function. For details, see “Setting the Automatic Standby
function.”
1 Press USB FUNCTION  on the remote or
Tip
To reduce static noise on a weak FM stereo station, press FM
MODE  repeatedly until “MONO” appears to turn off stereo
reception.
When playing a VBR MP3/WMA file, the system may
resume playback from a different point.
*2
When resume play is canceled, the display returns to the
number of folders.
*1
Using the BLUETOOTH function
You can listen to music from your iPod/iPhone/
iPad or BLUETOOTH device over a wireless
connection.
Before using the BLUETOOTH function, perform
pairing to register your BLUETOOTH device.
The system supports registration and connection
of the BLUETOOTH device and NFC, which enables
data communication by just touching a specified
location. For details on NFC, see “Connecting by
one-touch action (NFC).”
What is pairing?
The BLUETOOTH devices to be connected must be
registered with each other beforehand. Pairing is
an operation of registering two devices.
Once a pairing operation is performed, it does
not have to be performed again. In the following
cases, however, a pairing operation must be
performed again:
ˎˎPairing information was erased when the
BLUETOOTH device was repaired.
BLUETOOTH device
such as a “WALKMAN”
1 Place the BLUETOOTH device to be connected
within 1 meter from the system.
2 Press BLUETOOTH FUNCTION  or press
FUNCTION  on the unit repeatedly until “BT
AUDIO” appears in the display .
ˎˎThe BLUETOOTH indicator  flashes slowly
in blue.
ˎˎIf the system has been automatically
connected with the BLUETOOTH device in
the past, press BLUETOOTH  on the unit
to cancel the connection so that “BT AUDIO”
appears in the display .
3 Press and hold BLUETOOTH  on the unit for
2 seconds or longer.
The BLUETOOTH indicator  flashes quickly in
blue and “PAIRING” flashes in the display .
The system is in Pairing mode.
4 Perform the pairing operation on the
BLUETOOTH device and search for this system
with the BLUETOOTH device.
When searching has finished, a list of the
devices found may appear on the BLUETOOTH
device display.
ˎˎThis system appears as “SONY:CMT-SBT100”
or “SONY:CMT-SBT100B.” If it does not appear,
perform the procedure from step 1 again.
ˎˎWhen establishing connection with this
system, select the audio profile (A2DP, AVRCP)
on the BLUETOOTH device.
ˎˎIf the BLUETOOTH device does not support
AVRCP (Audio Video Remote Control Profile),
you cannot perform playback or stop
playback with the system.
ˎˎFor details on operations of the BLUETOOTH
device to be connected, refer to the operation
manual supplied with your BLUETOOTH
device.
5 Select “SONY:CMT-SBT100” or “SONY:CMT-
SBT100B” in the display of the BLUETOOTH
device.
If prompted to enter a passkey on the
BLUETOOTH device, enter “0000.”
6 Operate the BLUETOOTH device and perform
5 Press VOLUME +/  on the remote or turn
the VOLUME dial  on the unit left or right to
adjust the volume.
BLUETOOTH connection.
When pairing is completed and connection
with the BLUETOOTH device is established
correctly, the display  changes to “BT AUDIO”
from “PAIRING” and the BLUETOOTH indicator
 flashes slowly in blue.
ˎˎDepending on the type of BLUETOOTH device,
connection may start automatically after
pairing is completed.
Note
The system may enter Standby mode automatically if the
volume level of the connected component is too low. Adjust
the component’s volume accordingly.
Complete the connection with your
smartphone, following the instructions on the
screen.
Refer to the user’s guide of your smartphone
for the part of your smartphone used as touch
contact.
Notes
ˎ“Passkey”
ˎ
may be called “Passcode,” “PIN code,” “PIN
number” or “Password,” etc., depending on the device.
ˎThe
ˎ
pairing standby status of the system is cancelled after
about 5 minutes. If pairing is not successful, perform the
procedure from step 1.
ˎIf
ˎ you want to pair with several BLUETOOTH devices,
perform the procedure from step 1 to 6 individually for each
BLUETOOTH device.
Tip
You can perform a pairing operation or attempt to make a
BLUETOOTH connection with another BLUETOOTH device
while the BLUETOOTH connection is established with one
BLUETOOTH device. The currently established BLUETOOTH
connection is cancelled when BLUETOOTH connection with
another device is successfully established.
To erase the pairing registration
information
1 Press BLUETOOTH FUNCTION  on the remote
or press FUNCTION  on the unit repeatedly
until “BT AUDIO” appears in the display .
When the system is connected with a
BLUETOOTH device, the device name set for the
connected BLUETOOTH device appears in the
display  of the system. Press BLUETOOTH 
on the unit to cancel the connection with that
BLUETOOTH device then display “BT AUDIO.”
2 Press OPTIONS  to display the setting menu.
3 Press /  repeatedly to select “DEL LINK,”
then press
.
ˎˎTo disconnect the established connection, touch
your smartphone to the N-Mark  on the unit.
ˎˎWhen you touch an NFC-compliant smartphone
to the unit while another BLUETOOTH device
is connected with this system, the BLUETOOTH
device is disconnected and the system is
connected with the smartphone.
ˎˎIf you touch the smartphone connected
with this system to another NFC-compliant
BLUETOOTH headset or speaker, the smartphone
is disconnected from the system and connected
with the touched BLUETOOTH device.
Listening to music through a
BLUETOOTH connection
You can operate a BLUETOOTH device by
connecting the system and a BLUETOOTH device
using AVRCP.
Check the following before playing music:
ˎˎThe BLUETOOTH function of the BLUETOOTH
device is enabled.
ˎˎPairing has been completed.
1 Press BLUETOOTH FUNCTION  on the remote
or press FUNCTION  on the unit repeatedly
until “BT AUDIO” appears in the display .
4 Press /  repeatedly to select “OK,” then
press .
“COMPLETE” appears and all the pairing
information is erased.
2 Establish BLUETOOTH connection with the
BLUETOOTH device.
Once the connection is established, “CONNECT”
appears in the display  then the BLUETOOTH
device name set with the BLUETOOTH device
appears.
If the BLUETOOTH device has been connected
with this system in the past, it may be
connected automatically with no user operation
required.
Note
If you have erased the pairing information, you cannot make
a BLUETOOTH connection unless pairing is performed again.
To connect with a BLUETOOTH device again, you must enter
the passkey on the BLUETOOTH device.
Connecting by one-touch action (NFC)
NFC enables data communication by just touching
your device to a specified location.
Compatible smartphones are those equipped with
the NFC function (compatible operating system:
Android version 2.3.3 or later with the exception of
Android 3.x).
Check the website below for information on
compatible devices.
For customers in Europe and Russia:
http://support.sony-europe.com/
For customers in Latin America:
http://www.sony-latin.com/index.crp
For customers in other countries/regions:
http://www.sony-asia.com/support
Preparation on your smartphone (Android)
An NFC-compliant application must be installed
on your smartphone. If not installed, you can
download “NFC Easy Connect” from Google Play.
ˎˎIn some countries and regions, NFC-compliant
application may not be downloaded.
ˎˎFor some smartphones, this function may
be available without downloading “NFC Easy
Connect.” In this case, the operation and
specifications of the smartphone may be
different from the description in this manual.
1 Access the website below to install the
application.
https://play.google.com/store/apps/
details?id=com.sony.easyconnect
If you access using 2D Code
Read the following 2D Code to access.
3 Press   to start playback.
Depending on the BLUETOOTH device, you may
have to press   twice.
Depending on the BLUETOOTH device, you
may have to start up the AV software of the
BLUETOOTH device beforehand.
4 Press VOLUME +/  on the remote or turn
function.
For details, refer to the user’s guide supplied
with your smartphone.
About the “NFC Easy Connect” application
This is a free application especially used for
Android. Search the internet for detailed
information on “NFC Easy Connect” and download
the application.
ˎˎIn some countries and regions, NFC-compliant
application may not be downloaded.
Making a connection with your
smartphone by one-touch action
Just touch your smartphone to the system. The
system is turned on automatically, and pairing and
BLUETOOTH connection are established.
1 Start the “NFC Easy Connect” application on
your smartphone.
Check that the application display appears.
2 Touch your smartphone to the unit.
Touch the smartphone to the N-Mark  on the
unit and maintain contact until the smartphone
vibrates.
With the Automatic Standby function, the
system enters Standby mode automatically in
about 15 minutes when there is no operation or
audio signal output. “AUTO STBY” appears in the
display  for 2 minutes before the system enters
Standby mode. By default, the Automatic Standby
function is turned on. You can turn off the function
using the option menu.
1 Press OPTIONS  to display the setting menu.
2 Press /  repeatedly to select “AUTO STBY,”
then press
Other operations
To
Do the following:
Pause playback
Press  *.
Stop playback
Press  .
Select a folder
Press
Select a file
Press / .
Find a point in
a file
Hold down /  (or
/  on the unit)
during playback and release
the button at the desired point.
+/ .
* Depending on the BLUETOOTH device, you may have to
press   twice.
Note
These operations may not be available for certain
BLUETOOTH devices. In addition, the actual operations may
differ depending on the connected BLUETOOTH device.
To check the address of a connected
BLUETOOTH device
To cancel the connection with a
BLUETOOTH device
Press BLUETOOTH  on the unit. “DISCONNECT”
appears in the display .
Depending on the BLUETOOTH device, the
connection may be cancelled automatically when
you stop playback.
Using optional audio
components
1 Press VOLUME   on the remote or turn the
VOLUME dial  on the unit left to turn down
the volume.
2 Connect additional audio component to the
AUDIO IN jack  using an audio connecting
cable (not supplied).
3 Press AUDIO IN FUNCTION  on the remote
or press FUNCTION  on the unit repeatedly
until “AUDIO IN” appears in the display .
4 Start playback of the connected component.
Adjust the volume on the connected
component during playback.
.
Notes on the DAB/DAB+ display
information (CMT-SBT100B only)
The following is also displayed;
up to 8 characters of service name, up to 128 characters of
DLS (Dynamic Label Segment) and up to 16 characters of
ensemble label.
a value between 0 and 100 indicating the signal quality is
displayed.
3 Press /  repeatedly to select “ON” or
“OFF,” then press
.
Notes
ˎThe
ˎ
Automatic Standby function is invalid for the tuner
function (FM/AM/DAB*), even when you have enabled it.
ˎThe
ˎ
system may not enter Standby mode automatically in
the following cases:
while an audio signal is being detected
during playback of audio tracks or files
while the preset Sleep Timer or Play Timer is in process
ˎThe
ˎ
system counts down the time (15 minutes) again until
it enters Standby mode, even when Automatic Standby
function is enabled when a USB device is connected or
when a button on the remote or unit is pressed.
* AM is available for CMT-SBT100 only, or DAB is for CMTSBT100B only.
Setting the BLUETOOTH Standby
mode
You can enable/disable BLUETOOTH Standby
mode.
When BLUETOOTH Standby mode is enabled,
the system enters Wait mode for BLUETOOTH
connection even when the system is turned off.
If the system receives a playback command from
the connected BLUETOOTH device, it turns on and
music is played back. The BLUETOOTH Standby
mode is disabled by default.
1 Press OPTIONS  to display the setting menu.
2 Press /  repeatedly to select “BT STBY,”
then press
.
3 Press /  repeatedly to select “ON” or
“OFF,” then press
.
4 Press / (power)  to turn off the system.
When “BT STBY” is set to “ON,” the system turns
on and you can listen to music by activating
BLUETOOTH on the connected component.
the VOLUME dial  on the unit left or right to
adjust the volume.
Press DISPLAY  while the BLUETOOTH device
name set on the connected BLUETOOTH device is
shown in the display . The BLUETOOTH device
address appears in two installments on the
system display for 8 seconds.
2 Set your smartphone to enable the NFC
Setting the Automatic Standby
function
remaining playing time for an MP3 file
ˎThe
ˎ
following are not displayed correctly:
elapsed playing time of an MP3 file encoded using VBR
(Variable Bit Rate).
folder and file names that do not follow either the
ISO9660 Level 1/Level 2 or Joliet in the expansion format.
ˎThe
ˎ
following are displayed:
total playing time for a CD-DA disc (except when PGM
mode is selected and the player is stopped)
remaining playing time for a track of CD-DA disc
remaining playing time for a CD-DA disc (only when
Normal Play mode is selected during playback)
ID3 tag information for MP3 files. ID3 version 2 tag
information display has priority when both ID3 version 1
and version 2 tags are used for a single MP3 file.
up to 64 characters for an ID3 tag, where characters
allowed are uppercase letters (A to Z), numbers (0 to 9),
and symbols (˝ $ % ’ ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^ ~)
Note
“BT STBY” does not appear in the setting menu, if the
BLUETOOTH device is not registered on this system.
Adjusting the sound
Setting the bass boost
Press BASS BOOST  repeatedly to select “ON”
or “OFF.”
Adjusting the bass and treble
Press BASS +/  to adjust bass or TREBLE +/
 to adjust treble.
Or, press EQ  on the unit repeatedly to select
“BASS” or “TREBLE,” and adjust the selected item
using TUNE +/ .
Tip
This system is equipped with the DSEE function to reproduce
clear treble despite degradation caused by compression.
The DSEE function is usually activated automatically by
recognizing the sound source, but it may not be activated
depending on the function in use.
Changing the display
To
Do the following:
View
Press DISPLAY  repeatedly
information on when the system is on.
the display  *1
Display clock
Press DISPLAY  repeatedly
when the system is off. *2 The
clock appears for about 8
seconds.
You can view the information described below during
playback of a CD-DA/MP3 disc.
*2
The information does not appear in BLUETOOTH mode.
*1
CD-DA disc
remaining playing time of a track during
playback
total remaining playing time
MP3 disc
track or file name
artist name
album name
Notes on the display information
ˎCharacters
ˎ
that cannot be displayed appear as “_”.
ˎThe
ˎ
following are not displayed:
remaining playing time or total playing time for an MP3
disc
Using the timers
The system offers Sleep Timer and Play Timer. The
Sleep Timer has priority over the Play Timer.
Setting the Sleep Timer
The system is turned off automatically after the
time set for the Sleep Timer is elapsed.
The Sleep Timer works even if the clock is not set.
1 Press SLEEP  repeatedly to specify the time.
ˎˎSelect “30MIN” to turn off the system after 30
minutes.
ˎˎTo cancel the Sleep Timer, select “OFF.”
Setting the Play Timer
You can listen to a CD-DA or MP3 disc or radio
every day at a preset time.
Make sure you have set the clock before setting
the timer.
1 Prepare the sound source, and turn the
VOLUME dial  on the unit left or right or
press VOLUME +/  on the remote to adjust
the volume.
The available sound sources are: CD, USB, and
TUNER (FM, AM or DAB)* FUNCTION.
To start from a specific CD track, audio file or
radio station, create your own program.
* FM or AM for CMT-SBT100, or FM or DAB for CMTSBT100B.
2 Press TIMER MENU .
3 Press /  repeatedly to select “PLAY SET,”
then press .
The start time flashes in the display.
4 Set the time to start operation.
Press /  repeatedly to set the hour, then
press .
The minute indication flashes. Use the
procedure above to set the minutes.
When the start time is set, the system goes to
the stop time setting.
5 Use the same procedure as in step 4 to set the
time to stop the operation.
If “TIME NG” flashes in the display
The start time and the stop time are set to the
same time. Change the stop time.
6 Select the sound source.
Press /  repeatedly until the desired sound
source appears, then press .
For the available sound sources, see step 1.
After the sound source selection is finished, the
confirmation display for the Play Timer appears.
7 Press / (power)  to turn off the system.
ˎˎWhen the Play Timer is set, the system
automatically turns on about 15 seconds (for
FM, AM or DAB*) or about 90 seconds (for a
CD-DA disc or USB device) before the preset
time.
ˎˎThe Play Timer does not work if the system
is on at the preset time. Be careful not to
operate the system until it is turned on and
starts play with the timer.
* AM is available for CMT-SBT100 only, or DAB is for CMTSBT100B only.
To check the setting
1 Press TIMER MENU .
2 Press /  repeatedly to select “TIMER SEL,”
and then press
.
3 Press /  repeatedly to select “PLAY SEL,”
and then press .
The timer setting appears in the display.
To cancel the timer
Repeat the same procedure as “To check the
setting” until “OFF” appears in step 3, and then
press .
To change the setting
Start over from step 1.
Notes
ˎWhen
ˎ
the sound source for a Play Timer is set to a radio
station that you set using Automatic Scanning (AUTO)
or Manual Tuning (MANUAL) and you change the radio
frequency or band after setting the timer, the radio station
setting for the timer will also be changed.
ˎWhen
ˎ
the sound source for a Play Timer is set to a radio
station tuned from a preset radio station (preset number 1
to 20), and if you change the frequency of the radio station
or band after setting the timer, the radio station setting for
the timer will not change. The radio station tuning for the
timer is fixed at what you set for it.
Tip
The Play Timer setting remains as long as the setting is not
cancelled manually.
Troubleshooting
1 Make sure the power cord is firmly connected.
2 Find your problem in the checklist below, and
take the indicated corrective action.
If the issue persists, contact your nearest Sony
dealer.
If the STANDBY indicator  flashes
Immediately unplug the power cord, and check
the following item.
ˎˎIs the speaker cord shorted out?
After the STANDBY indicator  stops flashing,
reconnect the power cord, and turn on the
system. If the issue persists, contact your
nearest Sony dealer.
General
The system does not turn on.
ˎˎIs the power cord plugged in correctly?
The system has entered Standby mode
unexpectedly.
ˎˎThis is not a malfunction. The system enters
Standby mode automatically in about 15 minutes
when there is no operation or audio signal
output. See “Setting the Automatic Standby
function.”
The clock setting or the Play Timer
operation has been cancelled
unexpectedly.
ˎˎIf about a minute elapses with no operation, the
clock setting or Play Timer setting is cancelled
automatically. Perform the operation again from
the beginning.
There is no sound.
ˎˎMake sure the speaker cords are connected
correctly.
ˎˎCheck the supplied speakers are used.
ˎˎTurn the VOLUME dial  on the unit clockwise
or press VOLUME +  on the remote to turn up
the volume.
ˎˎMake sure the headphones are disconnected
from the headphone jack.
ˎˎMake sure an external component is connected
correctly to the AUDIO IN jack  and set the
function to AUDIO IN.
ˎˎThe specified station may have temporarily
stopped broadcast.
ˎˎThe balance of left and right sound is false.
Check the left and right speakers are connected
correctly.
ˎˎPut the speakers symmetrically.
ˎˎConnect the supplied speakers.
Severe hum or noise occurs.
ˎˎMove the system away from sources of noise.
ˎˎConnect the system to a different wall outlet.
ˎˎUse of an AC power tap with a noise filter (not
supplied) is recommended.
The remote does not function.
ˎˎRemove any obstacles between the remote and
the remote sensor  on the unit, and position
the unit away from fluorescent lights.
ˎˎPoint the remote at the remote sensor on the
unit.
ˎˎMove the remote closer to the system.
CD-DA/MP3 disc
“LOCKED” appears in the display  and
the disc cannot be removed from the disc
tray.
ˎˎConsult your nearest Sony dealer or local
authorized Sony service facility.
The disc or file will not play.
ˎˎThe disc that has not been finalized (a CD-R or
CD-RW disc to which data can be added).
The sound skips, or the disc will not play.
ˎˎWipe the disc clean, and replace it.
ˎˎMove the system to a location away from
vibration (for example, on top of a stable stand).
ˎˎOscillation of the speakers may be the cause of
sound skips, depending on the volume level.
Move the speakers away from the unit or change
the location of the speakers.
Play does not start from the first track or
file.
ˎˎReturn to normal play by pressing PLAY MODE
 repeatedly in stop mode until both “PGM”
and “SHUF” in the display  disappear.
Starting playback takes more time than
usual.
ˎˎThe following discs can increase the time it takes
to start playback:
a disc recorded with a complicated tree
structure.
a disc recorded in multi-session format.
a disc that has many folders.
USB device
An unsupported USB device is connected.
ˎˎIf you connect an unsupported USB device,
the following problems may occur. Check the
information on the websites about compatible
USB devices with URLs listed under “Playing a
file on a USB device.”
The USB device is not recognized.
File or folder names are not displayed on this
system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is no sound.
ˎˎThe USB device is not connected correctly. Turn
off the system, and then reconnect the USB
device.
There is noise, skipping, or distorted
sound.
ˎˎAn unsupported USB device is connected.
Connect a supported USB device.
ˎˎTurn off the system, then reconnect the USB
device and turn on the system.
ˎˎThe music data itself contains noise, or the
sound is distorted. Noise may have been
entered when creating music data due to the
conditions of the computer. In this case, delete
the file and send the music data again.
ˎˎThe bit rate used when encoding the files was
low. Send files encoded with higher bit rates to
the USB device.
“READING” is displayed for an extended
time, or it takes a long time before
playback starts.
ˎˎThe reading process may take a long time in the
following cases.
There are many folders or files on the USB
device.
The file structure is extremely complex.
Not enough free space in the memory.
The internal memory is fragmented.
The file or folder name (album name) is
not displayed correctly.
ˎˎSend the music data to the USB device again,
as the data stored in the USB device may have
been corrupted.
ˎˎThe character code that can be displayed by this
system are as follows:
Upper cases (A to Z).
Numbers (0 to 9).
Symbols (< > * +, [ ] @ \ _).
Other characters appear as “_.”
The USB device is not recognized.
ˎˎTurn off the system and reconnect the USB
device, then turn on the system.
ˎˎCheck the information on the websites about
compatible USB devices with URLs listed under
“Playing a file on a USB device.”
ˎˎThe USB device does not work properly. Refer
to the operating manual supplied with the USB
device for how to deal with this problem.
Play does not start.
ˎˎTurn off the system and reconnect the USB
device, then turn on the system.
ˎˎCheck the information on the websites about
compatible USB devices with URLs listed under
“Playing a file on a USB device.”
Play does not start from the first track.
ˎˎSet the play mode to Normal Play mode.
The USB device cannot be charged.
ˎˎMake sure the USB device is connected securely.
ˎˎCharging cannot be made when the power of
the system is off.
ˎˎThe USB device may not be supported by this
system. Check the information on the websites
about compatible USB devices.
Tuner
Severe hum or noise occurs (“STEREO”
flashes in the display window ), or
broadcasts cannot be received.
ˎˎConnect the antenna properly.
ˎˎFind a location and an orientation that provide
good reception, and then set up the antenna
again.
ˎˎKeep the antennas away from the unit, speaker
cord or other AV components to avoid picking
up noise.
ˎˎTurn off nearby electrical equipment.
Several radio stations can be heard at the
same time.
ˎˎFind a location and an orientation that provide
good reception, and then set up the antenna
again.
ˎˎBundle the antenna cables using commercially
available cord clips, for example, and adjust the
cable lengths.
DAB/DAB+ radio station is not received
properly.
ˎˎCheck all antenna connections, then perform the
DAB Automatic Scan procedure (see “Running
the DAB Automatic Scan manually (CMTSBT100B only)”).
ˎˎThe current DAB/DAB+ service may not be
available. Press TUNE +/  to select a different
service.
ˎˎIf you have moved to another area, some
services/frequencies may have changed
and you may not be able to tune into your
usual broadcast. Perform the DAB Automatic
Scan procedure to re-register the contents of
broadcasts. (Performing this procedure clears all
previously stored presets.)
The DAB/DAB+ broadcast of has been
interrupted.
ˎˎCheck the location of the system or adjust
the orientation of the antenna to increase the
indicated value of the signal quality. Refer to
“Changing the display” for further details on the
signal quality.
To reset the system to factory settings
If the system still does not operate properly, reset
the system to factory settings.
Use buttons on the unit to reset the system to its
factory default settings.
1 Disconnect the power cord and confirm that
the STANDBY indicator  is not lit. Then
reconnect the power cord and turn on the
system.
2 Press and hold   and /  on the unit
until “RESET” appears in the display.
All user-configured settings, such as preset
radio stations, timer, and the clock, are deleted.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Messages
CANNOT PLAY: The system cannot play audio
files due to an unsupported file format or
playback restriction.
CAN’T PLAY: You have set a disc that cannot be
played back on this system, such as CD-ROM
and DVD disc.
COMPLETE: The station preset operation ended
normally.
DATA ERROR: You tried to play an unplayable file.
ERROR: You operated the system during
initialization. Wait for a while until the
initialization is completed.
LOCKED: The disc tray  is locked and you
cannot remove the disc. Contact your nearest
Sony dealer.
NO DEVICE: No USB device is connected or the
connected USB device has been removed.
NO DISC: There is no disc in the player, or you
have loaded a disc that cannot be played.
NO MEMORY: The memory media is not inserted
in the USB device, or the system does not
identify the memory media.
NO STEP: All of the programmed tracks have
been erased.
NO SUPPORT: The system does not support the
connected USB device.
NO TRACK: There are not playable files on the
USB device or disc.
NOT IN USE: You pressed an unplayable button.
OVER CURRENT: Remove the USB device from
the port and turn off the system then turn on the
system.
PUSH STOP: You pressed PLAY MODE  during
playback in the CD or USB function.
READING: The system is reading the information
on the disc or USB device. Some buttons do not
work during reading.
STEP FULL: You tried to program more than 25
tracks or files.
TIME NG: The Play Timer start and end times are
set to the same time.
Precautions
Discs that this system CAN play
ˎˎAudio CD-DA discs
ˎˎCD-R/CD-RW (audio data of CD-DA tracks and
MP3 files)
Do not use a CD-R/CD-RW disc with no data
stored. Doing so may damage the disc.
Discs that this system CANNOT play
ˎˎCD-ROM
ˎˎCD-R/CD-RW other than those recorded in
music CD format or MP3 format conforming to
ISO9660 Level 1/Level 2, Joliet
ˎˎCD-R/CD-RW recorded in multi-session format
and not closed the session
ˎˎCD-R/CD-RW of poor recording quality,
CD-R/CD‑RW that have scratches or are dirty,
or CD‑R/CD-RW recorded with an incompatible
recording device
ˎˎCD-R/CD-RW which is finalized incorrectly
ˎˎDiscs containing files other than MPEG 1 Audio
Layer-3 (MP3) files
ˎˎDiscs of non-standard shape (for example, heart,
square, star)
ˎˎDiscs that have adhesive tape, paper, or sticker
attached to them
ˎˎRental or used discs with attached seals where
the glue extends beyond the seal
ˎˎDiscs that have labels printed using ink that feels
tacky when touched
Notes on CD-DA discs
ˎˎBefore playing, wipe the disc with a cleaning
cloth from the center out to the edge.
ˎˎDo not clean discs with solvents, such as
benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
ˎˎDo not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
On safety
ˎˎCompletely disconnect the power cord (mains
lead) from the wall outlet (mains) if it is not
going to be used for an extended period of time.
When unplugging the system, always grip the
plug. Never pull the cord itself.
ˎˎShould any solid object or liquid get into the
system, unplug the system, and have it checked
by qualified personnel before operating it again.
ˎˎThe AC power cord can be changed only by a
qualified service facility.
On placement
ˎˎDo not place the system in an inclined position
or in locations that are extremely hot, cold, dusty,
dirty, or humid or lacking adequate ventilation,
or subject to vibration, direct sunlight or a bright
light.
ˎˎBe careful when placing the system on surfaces
that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration
of the surface may result.
ˎˎIf the system is brought directly from a cold to a
warm location or is placed in a very damp room,
moisture may condense on the lens inside the
CD player, and cause the system to malfunction.
In this situation, remove the disc, and leave the
system turned on for about an hour until the
moisture evaporates.
On heat buildup
ˎˎHeat buildup on the unit during operation is
normal and is not cause for alarm.
ˎˎDo not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
ˎˎDo not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded,
and the picture on nearby TV sets may become
magnetically distorted. In this situation, turn off
the TV, wait 15 to 30 minutes, and turn it back on.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution. Do not
use any type of abrasive pads, scouring powder,
or solvents, such as thinner, benzine, or alcohol.
BLUETOOTH wireless
technology
BLUETOOTH wireless technology is a short-range
wireless technology linking digital devices, such
as personal computers and digital still cameras.
Using the BLUETOOTH wireless technology, you
can operate the units involved within a range of
about 10 meters.
The BLUETOOTH wireless technology is commonly
used between two devices, but a single device
can be connected to multiple devices.
You do not need wires to get connected as you
do with a USB connection, and you do not need
to place the devices face to face as you do with
wireless infrared technology. You can use the
technology with one BLUETOOTH device in your
bag or pocket.
BLUETOOTH wireless technology is a global
standard supported by thousands of companies.
These companies produce products that meet the
global standard.
Supported BLUETOOTH version and
profiles
Profile refers to a standard set of capabilities for
various BLUETOOTH product capabilities. See
“Specifications” for details on the supported
BLUETOOTH version and profiles.
Notes
ˎTo
ˎ use a BLUETOOTH device connected to this system,
the device must support the same profile as this system.
Note that the functions of the BLUETOOTH device may be
different depending on the specifications of the device,
even if it has the same profile as this system.
ˎBecause
ˎ
of the properties of BLUETOOTH wireless
technology, playback on this system is slightly delayed
compared with audio playback on the transmitting device.
Effective communication range
BLUETOOTH devices should be used within
approximately 10 meters (unobstructed distance)
of each other. The effective communication
range may become shorter under the following
conditions.
When a person, metal object, wall or other
obstruction is between the devices with a
BLUETOOTH connection
Locations where a wireless LAN is installed
Around microwave ovens that are in use
Locations where other electromagnetic waves
occur
Effects of other devices
BLUETOOTH devices and wireless LAN (IEEE
802.11b/g) use the same frequency band (2.4
GHz). When using your BLUETOOTH device
near a device with wireless LAN capability,
electromagnetic interference may occur. This
could result in lower data transfer rates, noise,
or inability to connect. If this happens, try the
following remedies:
Try connecting this system and BLUETOOTH
mobile phone or BLUETOOTH device when you
are at least 10 meters away from the wireless
LAN equipment.
Turn off the power to the wireless LAN
equipment when using your BLUETOOTH
device within 10 meters.
Effects on other devices
The radio waves broadcast by this system may
interfere with the operation of some medical
devices. Since this interference may result in
malfunction, always turn off the power on
this system, BLUETOOTH mobile phone and
BLUETOOTH device in the following locations:
In hospitals, on trains,and in airplanes
Near automatic doors or fire alarms
Notes
ˎThis
ˎ
system supports security functions that comply with
the BLUETOOTH specification as a means of ensuring
security during communication using BLUETOOTH
technology. However, this security may be insufficient
depending on the setting contents and other factors, so
always be careful when performing communication using
BLUETOOTH technology.
cannot be held liable in any way for damages or other
ˎSony
ˎ
loss resulting from information leaks during communication
using BLUETOOTH technology.
communication is not necessarily guaranteed
ˎBLUETOOTH
ˎ
with all BLUETOOTH devices that have the same profile as
this system.
devices connected with this system must
ˎBLUETOOTH
ˎ
comply with the BLUETOOTH specification prescribed
by the BLUETOOTH SIG, Inc., and must be certified to
comply. However, even when a device complies with the
BLUETOOTH specification, there may be cases where the
characteristics or specifications of the BLUETOOTH device
make it impossible to connect, or may result in different
control methods, display or operation.
ˎNoise
ˎ
may occur or the audio may cut off depending on
the BLUETOOTH device connected with this system, the
communications environment, or surrounding conditions.
Specifications
Amplifier section
Power output (rated): 20 watts + 20 watts (at
6 ohms, 1 kHz, 1% THD)
RMS power output (reference): 25 watts + 25 watts
(per channel at 6 ohms, 1 kHz)
Inputs/Outputs
AUDIO IN (external input) jack:
Stereo mini jack, sensitivity 700 mV, impedance
47 kilohms
 (headphone) jack:
Stereo mini jack, 8 ohms or more
USB:
Supported bit rate: MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA: 48 kbps - 192 kbps, VBR
AAC: 48 kbps - 320 kbps
Sampling frequencies: MP3 (MPEG 1 Audio
Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port: Type A, 5 V DC 2.1 A
CD-DA/MP3 player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
*This output is the value measurement at a
distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.
Frequency response: 50 Hz – 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
AM tuner section (CMT-SBT100 only):
Tuning range:
European models:
531 kHz – 1,602 kHz (with 9 kHz tuning
interval)
Other models:
530 kHz – 1,710 kHz (with 10 kHz tuning
interval)
531 kHz – 1,710 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna
Intermediate frequency: 400 kHz
FM tuner section:
FM stereo, FM superheterodyne tuner
Antenna: FM lead antenna
Tuning range: 87.5 MHz – 108.0 MHz (50 kHz
step)
DAB/DAB+ tuner section (CMT-SBT100B only):
FM stereo, DAB/FM superheterodyne tuner
Frequency range*
Band-III: 174.928 (5A) MHz – 239.200 (13F) MHz
* For details, see “DAB/DAB+ frequency table”
below.
Antenna: DAB/FM lead antenna
The DAB/DAB+ services are available only in
countries/regions that support DAB/DAB+
services.
DAB/DAB+ frequency table (Band-III)
Frequency
Label
Frequency
Label
174.928 MHz
176.640 MHz
178.352 MHz
180.064 MHz
181.936 MHz
183.648 MHz
185.360 MHz
187.072 MHz
188.928 MHz
190.640 MHz
192.352 MHz
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
209.936 MHz
211.648 MHz
213.360 MHz
215.072 MHz
216.928 MHz
218.640 MHz
220.352 MHz
222.064 MHz
223.936 MHz
225.648 MHz
227.360 MHz
10A
10B
10C
10D
11A
11B
11C
11D
12A
12B
12C
Frequency
Label
Frequency
Label
194.064 MHz
195.936 MHz
197.648 MHz
199.360 MHz
201.072 MHz
202.928 MHz
204.640 MHz
206.352 MHz
208.064 MHz
7D
8A
8B
8C
8D
9A
9B
9C
9D
229.072 MHz
230.784 MHz
232.496 MHz
234.208 MHz
235.776 MHz
237.488 MHz
239.200 MHz
12D
13A
13B
13C
13D
13E
13F
*Frequencies are displayed to two decimal places
on this system.
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m*1
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible BLUETOOTH profiles*2:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported content protection method:
SCMS-T method
Transmission bandwidth:
20 Hz – 20,000 Hz (with 44.1 kHz sampling)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
*2
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.
*1
Speaker section
2-way speaker system, Bass Reflex
Woofer: 100 mm, cone type
Tweeter: 40 mm, cone type
Dimensions (W/H/D):
Approx. 150 mm × 240 mm × 220 mm
Mass: Approx. 2.0 kg (per unit)
General
Power requirements:
Latin American model:
AC 120 V - 240 V, 50 Hz/60 Hz
Other models:
AC 220 V - 240 V, 50 Hz/60 Hz
Power consumption: 35 watts
Dimensions (W/H/D):
Approx. 290 mm × 106 mm × 221 mm (incl.
projecting parts)
Mass: Approx. 2.7 kg
Supplied accessories: Remote (RM-AMU171) (1),
R6 (Size AA) batteries (2), Speaker cords (2),
Speaker pads (8), FM lead/AM loop antenna (1)
(CMT-SBT100 only), DAB/FM lead antenna (1)
(CMT-SBT100B only), Operating Instructions (this
manual) (1)
Design and specifications are subject to change
without notice.
Standby power consumption: 0.5 W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising