advertisement
SOUND BAR WITH BLUETOOTH RECEIVER
MODEL NO.: SB-2032BT
CONTENTS
Safety information-------------------------------------------------------------------------------------------------2,3
Welcome ---------------------------------------------------------------------------------------------------------------4
Set up--------------------------------------------------------------------------------------------------------------------5
Your 2.0 Speaker Bar-------------------------------------------------------------------------------------------------6
Remote Control--------------------------------------------------------------------------------------------------------7
USB,Bluetooth---------------------------------------------------------------------------------------------------------8
FM Radio----------------------------------------------------------------------------------------------------------------9
Clock and Sleep Timer / Alarm------------------------------------------------------------------------------------10
Operating and connecting an external device -----------------------------------------------------------------11
Mounting the Speaker Bar onto a wall ---------------------------------------------------------------------- 12,13
Troubleshooting / Maintenance / Technical specifications------------------------------------------------- 14
1
Troubleshooting
Problem
No power
No sound
No sound from bluetooth first connection
Function disturbed
The remote control won' t work
What to do
Check that the power is switched on at the wall.
Check if the power cord is properly connected to the power outlet.
Check that the volume control is NOT at minimum setting.
Check that it is NOT set to mute.
Check if you have entered password or not. It needs to start with
".
I f n o n e o f t h e a b o v e s o l u t i o n s w o r k , t h e n s w i t c h o f f a n d u n p l u g y o u r S p e a k e r s y s t e m , l e a v i n g i t f o r 2 m i n u t e s a n d t h e n s w i t c h i n g i t b a c k o n a g a i n .
Inspect or replace the battery.
Make sure there are no obstacles obscuring the front of the
Speaker.
Maintenance
1.Do not use harsh or abrasive cleaning agents or solvents.
2.Do not attempt to disassemble your product.
3.Do not paint your product.
4.Do not drop, throw or try to bend your product.
5.Do not expose your product to open flames.
Technical specifications
Size
Output power
Standby power consumption
Input sensitivity
S/N(A weight)
Frequency Response
L/ R seperation (1khz)
L/ R balance (stereo)
Supported file formats
FM
810(L)x113.5(H)x61(D)mm
20W+20W
1W
800mV
60dB
50Hz~20KHz
40dB
1.5dB
MP3.WMA
87.5-108MHz
*Specifications are subject to change without prior notice.
14
2/. Mounting on the dry wall
You should use
2 pieces of short screws 2 pcs plastic tubes
1. Use the TAPE MEASURE to decide how high you'd like to hang the Speaker Bar
on the wall. The SOUND Bar must be hung within 5 feet of an AC power outlet
for the attached AC power cord to reach.
2. Mark the position of the mounting screws on the wall using a pencil.
3. Line the LEVEL up on both of your mark sure they are level.
If they're not, adjust the marks as needed to make them level.
4. Drill a hole by a powerful electric drill.
5. Use a hammer gently nail 2 plastic tubs into the holes.
6. Drill through the screws directly into the holes.
7. Use the LEVEL to check that the mounting screws are level.
8. Put the SOUND Bar onto the mounting brackets, and make sure there is a firm
and stable connection before letting go of the Sound Bar.
9. Finally, use the LEVEL to confirm that the Sound Bar is level.
(1)
13
(2)
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.
!!
This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Keep these instructions
Do not use this unit near water.
Clean only with as lightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the supplied instruction manual.
Protect the power cord from being walked on or pinched, particularly at plugs,
and the point where it exits from the unit.
Do not allow the power cord to overhang the edge of a table.
Unplug this unit when unused for long periods of time.
!!
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. THE UNIT
MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO
OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON TOP OF IT.
NOTE: No naked flames such as candles should be placed near or
underneath the unit.
IMPORTANT SAFETY INSTRUCTION(Continued)
This unit has been produced according to all current safety regulations.
The following safety tips should safeguard users against careless use and the dangers connected with such use.
Although this appliance has been carefully manufactured and rigorously checked prior leaving the factory, as with all electrical appliances it is possible for problems to develop. If you notice smoke, anexcessive build up of heat or any other unexpected phenomena, youshould disconnect the plug from the mains power socket immediately.
Ensure that the unit is sufficiently ventilated! Never place next to or underneath curtains!
2
The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
This set should only be connected to a mains power supply which matches that stated on the label on the rear of it-do not attempt to connect it to any other type of supply.
The socket-outlet must be installed near the equipment and easily accessible.
' many other items of equipment.
Apparatus with Class 1 construction shall be connected to a mains socket
outlet with a protective earthing connection.
Keep away from rodents. Rodents enjoy biting into electric flexes.
Always hold the plug when pulling out the plug from the mains supply socket.
Do not pull on the flex, the flex can become overloaded and cause a short
circuit.
Set up the unit so that no one is able to trip over the flex.
Do not place heavy items on the flex, which may damage it.
Take note that the flex cannot be reached and pulled by young children,
avoiding injury.
Do not set up the unit near to heat sources. The casing and the flex could be
damaged by the impact of heat.
Avoid placing the unit on any surfaces that may be subject to vibrations or
shocks.
When you leave your home for long periods of time, unplug the AC power
cable for safety reasons.
The unit becomes warm when in operation. Do not place any covers or
blankets on the unit in order to prevent overheating. The ventilation holes
are not to be blocked. Do not set up near radiators. Do not place in direct
sunshine. When placing on a shelf leave 5cm(2 )free space around the
whole unit.
Do not allow water or moisture to enter the unit. Do NOT use in wet or moist
areas such as Bathrooms, steamy kitchens or near swimming pools.
Do not use this unit when moisture condensation may occur.
Any repairs must be carried out by qualified personnel only.
Liquids spilt into the unit can cause serious damage. Switch the set OFF and
disconnect the mains power supply, then consult a qualified service person
before attempting to use the unit again.
Do NOT remove the safety covers. There are no useable or serviceable parts
inside. You may invalidate the warranty. Qualified personnel must only service
this apperatus.
Take good care of the remote control, do not drop.
Never place hot objects or open flame sources on or close to the unit.
High temperatures can melt plastic and lead to fires.
To clean use a soft dry cloth. Do NOT use solvents or petrol based fluids.
For stubborn stains, you may use a damp cloth with dilute detergent.
3
Mounting the Speaker Bar onto a wall
We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
600mm
You will need
Level
Manual or Electric drill
1/. Mounting on the wooden wall
You should use
Pencil
Tape Measure
2 pcs short screws
1. Use the TAPE MEASURE to decide how high you'd
like to hang the SOUND Bar on the
wall. The SOUND Bar must be hung within 5 feet of
an AC power outlet for the attached AC power cord
to reach.
2. Mark the position of the mounting screws on the wall
using a pencil.
3. Line the LEVEL up on both of your mark sure they are
level. If they're not, adjust the marks as needed to
make them level.
4. After you've double checked your marks, drill through the screws directly
into the marks that you have made on the wall.
5. Use the LEVEL to check that the mounting screws are level.
6. Put the Sound Bar onto the mounting brackets, and make sure there is a firm and
stable connection before letting go of the Sound Bar.
7. Finally, use the LEVEL to confirm that the Sound Bar is level.
12
Operating and connecting an external device
You can connect external devices (MP3 player ,CD player ,TV etc) to the Speaker Bar in several ways.
Using a RCA audio cable
Make sure you match up the Red (R)and White (L)Audio connectors,either RCA cable or line in/out cable only.
Using a 3.5mm line-in cable
You can also connect an external device to your Speaker Bar through the AUX/LINE in jack in the rear panel of the sound bar To play the external device you will need to select
AUX SOURCE using the SOURCE button.
Once the device is connected you can control playback as you would usually.
Press the VOLUME + and - buttons on the sound bar to increase or reduce the volume.
Press the MUTE button to turn the sound off, press it again to return to the previous volume level.
2 1
Headphone
Left(white) Right(red)
Audio output
TV
BLUETOOTH
11
Welcome
Congratulations on purchasing this bluetooth sound bar. The Speaker Bar
allows you to play TV audio content from an attached television, and from
your bluetooth enabled mobile phone, PC or Tablet.
Please read the warning section carefully before using your Speaker Bar.
You should have
RCA CABLE 1
LINE in Cable 1
AC/DC adapter 1
1 3
Wall mount fittings
screw 2pcs
Remote control
STANDBY
EQ MUTE
CLOCK ALARM SLEEP
MEM UP REPEAT
SOURCE DOWN
VOL
3D
VOL+
2 plastic tubes x 2pcs
2.0CH Speaker Bar
Note:
Ventilation
When placing the Speaker Bar on an entertainment center, bookshelf,or any type of enclosed space, be sure to allow at
least 2-3 inches of space around the Speaker Bar for ventilation. If the Speaker Bar is enclosed in a tight space, without ventilation, heat generated from the Speaker Bar could produce a potential heat hazard.
4
2-3 inches
Set up
Setting up your Speaker Bar
Insert the AC adapter plug into a appropriate wall socket and turn on power to the out let.
The remote control battery
1. It includes one piece of 2025 battery.
2. Remove the transparent sheet.
3. Replace the remote control battery when it no longer operates or
the range is reduced considerably .
STANDBY
EQ MUTE
CLOCK ALARM
SLEEP
MEM UP REPEAT
SOURCE DOWN 3D
VOL VOL+
5
Clock and Sleep Timer
Setting the Clock
1. Press the STANDBY button to turn the power off.
2. Press the CLOCK button on the remote control.
3. The time on the display will begin blinking.
4. Press the and buttons on the remote control to adjust the hour.
5. Press the CLOCK button again on the remote control to go to minute adjustment.
6. Press the and buttons on the remote control to adjust the minute.
7. Press CLOCK button again to confirm the setting.
Setting the Sleep Timer
1. Press the STANDBY button to turn the power on.
2. Press the SLEEP button repeatedly to set the sleep timer.
3. After the set sleep time has expired, the sound bar will automatically power off.
Alarm
Setting the Alarm
1. Press the STANDBY button to turn the power on.
2. Press SOURCE button twice on the remote control and select the FM Mode.
Press or buttons to select the desired radio frequency .
3. Adjust the volume to the desired level .
4. Press the STANDBY button on the remote control to switch off the power.
5. Press the ALARM button on the remote control.
6. The time on the display will begin blinking.
7. Press the and buttons on the remote control to adjust the hour.
8 . Press the ALARM button again on the remote control to go to minute adjustment.
9. Press the and buttons on the remote control to adjust the minute.
10. Press ALARM button again to confirm the setting.
11.After the set time has expired the ALARM will ring the preset radio station.
10
FM Radio
FM Antenna
Adjust the FM Wire Antenna (included) to get the best reception signal.
Tuning the FM Radio
1. Press the STANDBY button to turn the bar speaker on.
2. Press the SOURCE button to switch to FM radio mode.
3. Press the or buttons on the remote to tune the FM radio.
Listening to a Saved Radio Station
1. Press the STANDBY button to turn the bar speaker on.
2. Press the SOURCE button to switch to FM radio mode.
3. Press the MEM buttons on the remote to cycle through saved radio stations.
Saving a Radio Station
1. Follow the instructions for tuning the FM radio.
2. After tuning to the desired station, press the MEM button.
3. Press the UP or DOWN buttons on the remote to select a preset.
4. Press the MEM button to save the current radio station to the selected preset.
Up to 20 stations can be saved to the bar speaker s memory.
9
Your 2.0 Speaker Bar
Features Defined
1
2
3
4
5
USB
STANDBY PLAY MODE VOL VOL+
6
7
8
9
10 10
FM
AUX IN DC 18V
11 12 13
1. LCD display
2. STANDBY button : Press to turn the speaker bar off or on.
3. USB jack : To insert memory sticker
4. PLAY button : Press to play music.
5. MODE button : Press to select the input source.Each press
will source through the following selection AUX-FM-BT-USB.
6. REMOTE SENSOR : Ensure this area is not covered or blocked
by any object.
7. Bluetooth LED indicator : It is lighting when BT mode is selected.
8. VOL + : Press to increase the volume.
9. VOL - : Press to reduce the volume
10. Mounting bracket.
11. FM antenna port.
12. AUX/LINE in jack : To insert either RCA cable or LINE in cable
13. DC jack in.
6
Remote Control
1
4
7
10
13
14
16
STANDBY
EQ MUTE
CLOCK ALARM SLEEP
MEM UP REPEAT
SOURCE DOWN 3D
VOL VOL+
2
3
5
6
8
9
11
12
15
17
1. STANDBY button: Press to turn the speaker bar off or on.
2. EQ button: Press to select FLAT, ROCK, JAZZ, POP and
CLASSIC.
3. MUTE button: Press to mute the volume.
4. CLOCK: Press to set the time.
5. ALARM: Press to set the alarm.
6. SLEEP: Press repeatedly to set the sleep timer.
7. MEM: Press to cycle through saved radio stations
8. UP: Press to navigate up radio stations.
9. REPEAT: Press to repeat a single or all track.
10. : Press to go to previous track.
11. : Press to play or pause music.
12. : Press to go to next track.
13. SOURCE: Press to select the input source.Each press will
source through the following selection AUX-FM-BT-USB.
14. DOWN: Press to navigate down radio stations.
15. 3D: Press to switch on or off 3D effect.
16. VOL-: Press to reduce the volume.
17. VOL +: Press to increase the volume.
7
USB OPERATION
1. Playing the files form the connected USB device. Connect a USB flash or other USB
storage device (up to 16GB) to the USB jack or insert desired media (up to 16GB)
Memory stick with adaptor/SD and MMC card). You can play music in MP3 format.
2. Press the STANDBY button.
3. Press the SOURCE button on the remote control or on the unit to select USB function.
NOTE : The time taken for thecontents of the desired media to be read varies
according to the memory size.
4. Play and Pause the desired song track using the navigation on the remote
to repeat the track.
Bluetooth SET UP
1. Switch on the sound bar. Press the SOURCE button and select BT function.
2. The BT blue LED will flash 3 seconds and then stop for 30 seconds. It is now searching
for the last paired device.
3. If there is no device searched, blue LED will flash again. At this time, you can pair with
other new device you prefer. Turn on a device such as an iPod, iPhone, Tablets or
Mobiles etc with bluetooth transmitters. When a device is connected and paired with
connect or pair with.
4. If the initial set up connection is succesful ,the next time the speaker is turned on , the
speaker will automatically pair to the last device it was connected with .
5. If there is no bluetooth transmitter device found, the BT blue LED will continue to flash
non stop.Press SOURCE button on remote control to select USB,AUX or FM.
NOTE:
1. The Bluetooth speaker only connects to device at a time. Turn off the Bluetooth
speaker in order to pair the device with another Bluetooth device.
2. The maximum transmission between the Bluetooth speaker and a device is 10 meters
or 32 feet.
3. Interferece may occur during playback when using the Bluetooth funtion near other
wireless devices. If playback through Bluetooth is problematic, move the Bluetooth
speaker and the playback device to a different location, or use the 3.5mm audio cable
jack instead of the Bluetooth function.
NFC OPERATION
For an NFC-enabled Bluetooth product, you can achieve rapid pairing connectivity.
With an NFC-enabled device, please open the NFC function and touch NFC sensitive region of the sound bar, you can quickly connect Bluetooth pairing;
In the connected state, use NFC- enabled device near the NFC sensitive area of sound bar, you can disconnect Bluetooth.
In the off state, use device near NFC sensitive area of sound bar, you can connect
Bluetooth again.
8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project