- Spectra Merchandising
PORTABLE OUTDOOR BLUETOOTH SPEAKER
WITH FLASHLIGHT
USER MANUAL
SFA900
BC
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR FIRST ALART® CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is only the start
of your musical enjoyment. Now it's time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association's Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting your
sensitive hearing. Sound can be deceiving. Over time your hearing "comfort level"
adapts to higher volumes of sound. So what sounds "normal" can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
•
Start your volume control at a low setting.
•
Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
Once you have established a comfortable sound level:
•
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association's Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on its back cover. You should note the serial
number of this unit in the space provided as a permanent record of your purchase to
aid in identification in the event of theft of loss.
Model Number: SFA900
Serial Number:
1
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take
special note of all warnings listed in these instructions and on the unit.
1. Read these instructions – All the safety and operating instructions should be read
before the appliance is operated.
2. Keep these instructions – The safety and operating instructions should be kept for
future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow all instructions – All operation and use instructions should be followed.
5. Clean only with dry cloth – The appliance should be cleaned only as
recommended by the manufacturer.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the appliance
should not be situated on a bed, sofa, rug, or similar surface that may block the
ventilation openings; or placed in a built-in installation, such as a bookcase or
cabinet that may impede the flow of air through the ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
8. Only use attachments / accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
10. Power Sources – The appliance should be connected to a power supply only of
the type described in the operating instructions or as marked on the appliance. Do
not overload wall outlet.
11. Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
12. There is a high energy rechargeable battery inside the speaker box, do not throw it
into fire to avoid danger of explosion.
13. Do not charge the internal rechargeable battery longer than specified to prevent
danger of fire. Overcharging rechargeable batteries may shorten their life span.
14. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs,
seek advice from your local qualified service technician or contact the distributor
via the telephone number at the back of this instruction manual.
15. Caution marking and nameplate are located on back of product.
IMPORTANT NOTES
Avoid installing the unit in locations described below:
•
Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.
•
Places subject to constant vibration.
2
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from moving
when you operate the controls. These 'feet' are made from non-migrating rubber
material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives, or cleaning
sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on
the furniture. To prevent any damage to your furniture we strongly recommend that you
purchase small self-adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the rubber
'feet' before you place the product on fine wooden furniture.
CAUTION ON WEATHER RESISTANT:
This unit has been constructed to resist rain and moisture only. It should not be
operated under running water and under no circumstances should it be fully
immersed in water.
3
PRODUCT FEATURES
The SFA900 is a Bluetooth portable stereo speaker with the following features:
•
Auxiliary input jack to play music from your iPod or digital audio player
•
Wireless playback of music from your cell phone via the Bluetooth connection
•
Up to 33 feet (10 meters) operating range
•
Digital volume control
•
Flashlight and SOS light
PREPARATION FOR USE
ACCESSORIES
Unpack the unit carefully to remove all the accessories from the packing. Verify that the
following accessories are present before setting up the unit.
•
Main Unit
X1
•
USB charging cable
X1
•
User Manual
X1
CARABINER CLIP
To use the carabiner clip,
Press on the clip to open it.
Use the carabiner clip for hanging the SFA900.
4
LOCATION OF CONTROLS
5
3
4
1
2
15
17
16
6
7
8
11
10
12
9
13
14
1.
Bluetooth / AUX Mode Indicator
10. SOS LIGHT ON / OFF BUTTON
2.
Battery Charging / Low Battery Indicator
11. Micro USB DC IN Port
3.
Carabiner Clip
12. USB Charging Output Port
4.
Built In Microphone
13. AUX-IN JACK
5.
Flashlight
14. Rubber Dust Cover
6.
Bluetooth PAIRING / Phone Hands-Free
15. Left Speaker
7.
POWER ON / OFF BUTTON
16. Right Speaker
8.
FLASHLIGHT ON / OFF BUTTON
17. NFC linking Point
9.
VOLUME UP (+) / Down (–) BUTTON
5
LED Status Indicators
LED Position
Power/MODE Indicator
Discription
No Power
Power on/Ready to link
Power on/Bluetooth
Connected
Power on/Paired device is
out of range or turned off
Power on/AUX Mode
Charging/Low Battery
Indicator
No Charging
LED Status
LED Off
BlueLED flashing fast
Blue LED lights
steadily
Blue LED flashing
slow
Green LED lights
steadily
LED off
Charging
Fully charged
Low Battery
Red LED on
Green LED on
Red LED flash
Remarks: Flashing Fast - less than 1 second apart.
Flashing Slow - around 2 seconds apart.
BUTTON DEFINITIONS
#
BUTTON NAME
BUTTON
ACTION
AUX MODE
BLUETOOTH
MODE
1
VOLUME+
Press
Increases the volume level
2
VOLUME-
Press
3
Bluetooth
Hands-free
Decreases the volume level
N/A
Searching/Pairing
Button/
Button
Press and hold
for 2 seconds
Incoming call
4
5
/
Button
/
Button
/
Button
/
Button
Tap
Tap
Press & hold
Tap twice
6
N/A
Picks up an
incoming call
N/A
Hangs up your
current call
N/A
Rejects an
incoming call
Outgoing Call
N/A
Redials the last
outgoing call
POWER SOURCE
This unit operates on a built-in Li-ion battery. The internal battery may not fully charged
out of the box, even if the Green charging LED lights. We recommend that you charge
the SFA900 for at least 10 hours before first use.
CHARGING INSTRUCTION
This unit operates on a built-in Li-ion battery that can be recharged either using the
USB port on your computer or from an AC adaptor (not included) with a rated output of
DC 5V, 500mA.
Note: The micro USB DC IN jack is located on the side of the unit under rubber dust
cover, and is designed for charging the internal Li-ion battery. The unit will still
operate while charging, but doing this may reduce the battery life, and increase
the charging time.
CHARGING THE BATTERY USING THE micro USB PORT
1.
2.
3.
4.
5.
6.
Charge the built-in Li-ion battery a minimum of 10 hours prior to first use.
Place the unit standing upright on a table or flat surface and pull the tab on the
rubber dust cover to open it.
Use the included USB charging cord, and plug the SFA900 into a USB port on
your computer or into a USB power adaptor (not included).
The Red charging LED located on the top panel
(flashlight side) will light. It
will turn Green when the battery is fully charged.
Unplug the USB cable from the power source once the battery is fully charged.
Close the rubber dust cover.
After prolonged use, the battery voltage may discharge and operation might
become intermittent. When this happens, please recharge the internal battery.
LOW BATTERY INDICATION
1. When operating the unit on battery power, the low battery top panel
(flashlight
side) will flash indicating that the battery is low, please connect the unit to USB
power for charging.
2. After prolonged use, the battery voltage will discharge and operation might
become intermittent. When this happens, please recharge the internal battery.
7
Note: 1.) Charging time will vary if you are listening to music while charging the
speaker battery. We recommend you turn off the speaker power during the
charging process or until the speaker batteries are fully charged.
2.) To prolong the life of a rechargeable battery, it is recommended to
completely discharge it before fully charging it again.
3.) Rechargeable batteries need to be cycled for maximum performance and
longer battery life. If you don’t use the player that often, be sure to recharge
the battery at least once a month in order to keep the internal battery
working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Recycle Li-ion batteries. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and
current settings are correct for the battery pack being charged.
• Charge batteries on a fireproof surface away from flammable items or liquids.
• Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
• Follow the manufacturer’s instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged or not in use.
•
•
•
•
•
NOTE: These speakers are not magnetically shielded and may cause color distortion
on the screen of some TVs or video monitors. To avoid this, you may need to move the
speakers further away from the TV or monitor if unnatural color shifts or image
distortion occurs.
TURNING THE SPEAKER POWER ON/OFF
1.
2.
In Power Off mode, press and hold the POWER ON /OFF button to turn on
the unit, the Bluetooth / AUX mode LED will light up and fast flashing to
avialable for Bluetooth enable devices for searching.
Note : In Bluetooth mode, the unit will turn off automatically if no Bluetooth
device is connected to the speaker within 15 minutes.
In Power On mode, press and hold the POWER ON /OFF button to turn
OFF the unit, the Mode LED will go off.
8
BLUETOOTH OPERATION
Press and hold the Power ON/OFF button to turn ON the unit and follow the directions
below to connect via Bluetooth.
CONNECTING YOUR BLUETOOTH DEVICE USING NFC
ABOUT NFC
NFC (Near Field Communication) is a technology enabling short-range wireless
communication between various devices, such as mobile phones and IC tags Thanks
to the NFC function, data communication can be achieved easily just by touching the
relevant symbol or designated location on NFC compatible devices.
1.
2.
3.
4.
5.
Make sure your Smartphone or Bluetooth device has the NFC feature, and it is
turned ON (enabled).
Turn on SFA900 power and wait for 5 seconds to enter pairing mode, Bluetooth
pairing MODE indicator flash fast.
Note : If the SFA900 is connected to other smartphone, press and hold the
Bluetooth button to enter Bluetooth paring mode.
Touch the back of your smartphone to the NFC linking point (#17) located on the
left hand side of the unit (near top panel when unit standing up). Check the
owner’s manual of your Bluetooth device to locate the NFC touch point if you are
not sure where it is.
If the SFA900 is in pairing mode, it will turn on and enter Bluetooth mode
automatically and pair with your smartphone.
Some smartphones may ask you to confirm the pairing if they are not paired
before.
NOTE: If you have multiple NFC compatible devices to link, just touch the smartphone
to a different device to switch the connection to that device. For example, when your
smartphone is connected to the SFA900, just touch the linked smartphone to the
system or smartphone you want to change the Bluetooth connection to (one touch
connection switching). The connection will automatically be transferred from your
smartphone to the new device.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH
ENABLED DEVICE to the SFA900
If the SFA900 has never been paired with a Bluetooth device before. You need to follow
the pairing instructions below to link the SFA900 with your Bluetooth device.
1. Wait 5 seconds after the power switch is turned on, the Blue LED backlight on
the left panel will be flashing fast. The SFA900 is ready to pair (link) with your
Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the SFA900.
3. Select "SFA900" from the device list when it appears on your screen. If required,
enter the pass code “0000” to pair (link) the SFA900 with your cell phone. A
tone will be heard if paring succesful and blue MODE LED will begin flashing slow.
9
4.
5.
After successfully pairing (linking) your cellphone with the SFA900, the MODE
indicator lights Blue (solid), and you can play music from your cell phone
wirelessly to the SFA900.
If you want to connect the SFA900 to another cell phone after pairing
successfully, press and hold
for 2 seconds, the Blue LED backlight will
change to flashing fast, repeat step 2-4 above.
Note : The SFA900 may automatically reconnected to a previously linked
device that is in range, so you may need to turn off the Bluetooth on any
paired device first before going through the above steps.
NOTE to iPhone/iPod/iPad users : If you are using an iPhone, iPod or iPad
and you clear all the Bluetooth connections stored in the SFA900, you may
need to delete (‘‘Forget this Device’’) the previous connection with the
SFA900 located in the Devices list under Bluetooth settings. Once the
SFA900 connection is deleted from the Devices list, you will need to go
through above paring steps again to reconnect to the SFA900.
6. To turn off the SFA900 Bluetooth, press and hold the Power button, the MODE
indicator LED goes off. Don’t forget to also turn off the Bluetooth feature on your
device.
7. Always turn off the unit when not in use to prevent draining the internal battery.
Notes:
1.) Refer to manual of your cell phones, iPad, computer or other Bluetooth
enabled device for Bluetooth operation, since it may vary from model to model.
2.) SFA900 will be off if pairing is unsuccessful within 15 minutes to save battery
power, blue LED turns off.
3.) Your Bluetooth enabled device will not play the music through the speaker,
even it can be connected, if the device does not support A2DP.
4.) Do not plug in the Audio jack when the Bluetooth is in operation.
5.) If you are pairing (linking) your computer to the SFA900 using Bluetooth, you
may need to set the SFA900 as your computer’s default sound device.
PLAYBACK MUSIC ON YOUR BLUETOOTH DEVICE
1. Press and hold the Power button to turn on the unit.
2. Turn on Bluetooth of your cell phone or device which has been successful pairing
with SFA900 before, the unit can connect the latest device automatically.
3. After the Bluetooth device is paired with the SFA900, press the Play/Pause button on
your Bluetooth device to start playback music in your cell phone or Bluetooth device.
If music has not been started playback, please go to music libary of your bluetooth
device and start it manually.
4. Press the Play/Pause button on your bluetooth device to pause or resume playback.
5. Press the VOLUME+/- button to adjust the volume level
6. Always turn the power OFF when not in use to prevent draining the internal battery.
10
Using the SFA900 as a Hands Free Bluetooth Speakerphone
1.
2.
3.
4.
5.
Link your cellphone to the SFA900 via Bluetooth as described above.
When receiving an incoming call on your cell phone, tap the
button on the
SFA900 to switch an incoming call from cell phone to the SFA900. Complete your
call using the built-in microphone and speaker of the SFA900.
Press the VOLUME UP(+) /DOWN (-) buttons on the SFA900 to adjust the volume
to your desired sound level.
To end the call, tap the
button again. If you were streaming music from your
cell phone to the SFA900, the music will automatically resume streaming to the
SFA900.
To reject an income-call, simply press and hold the
button on the SFA900 for
about 2 seconds.
Redialing the last number with the SFA900
The SFA900 will automatically redial the last number you dialed by tap the SFA900
button twice.
Hanging up your call with the SFA900
When your phone call is finished, tapping the
button will end the call in progress.
Re-linking to the cell phone
If your cell phone is already paired with the SFA900, but became unlinked even with
both Bluetooth devices turned on. You can re-link them by:
1. Turn the unit Power off and then turn it on again, wait for 10 seconds, the blue
backlight LED will flash fast and re-link your cell phone automatically. The blue
backlight LED will change to solid lighting and a short tone will be heard if the
SFA900 and your cell phone have been re-linked successfully.
2. You can also re-link the SFA900 by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and listen to your external source through the
speakers of this system.
1.
Place the unit standing up on table, open the rubber dust cover.
2.
Use an audio cable (not included) with one 3.5 mm stereo plug on each end of
the cable. The SFA900 will switch to AUX mode automatically, the MODE
indicator LED lights green.
11
3.
Plug one end into the Aux-in jack on the main unit and the other end of the cable
into the Line-out Jack or Headphone Jack of your external audio device.
4.
Turn on the external audio device.
5.
The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note: Always turn the unit OFF when not in use to prevent draining the internal battery.
Don't forget to switch off the power of your external device as well.
CHARGING YOUR SMART PHONE OR PORTABLE DEVICE
This unit features a USB port for charging your portable device (iPod, iPhone, Android
phone, etc.) when used with the USB charging cord that came with your device.
Note : To use USB charging function, please fully charge the internal battery before
using.
1. Place unit standing up on table, open the rubber dust cover.
2. Plug the standard end of the USB cable (not included) into the USB CHARGING
PORT located on the back of the unit. Plug the other end of the cable into the
device you wish to charge.
3. Observe the battery charge indicator on your device to make sure the charging
process starts normally.
4. Unplug the cable when your device is fully charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to charge to
make sure the charging current requested does not exceed 1A (1000mA). Overloading
the charging circuit may damage the unit permanently and void the warranty.
1. The USB charging port of this unit supplies a DC 5V output at 1000mA maximum
current to charge your smart phone or portable device battery and it cannot
support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V
only.
3. The USB port of this unit is designed for smart phone or portable device battery
charging only and it cannot support data transfer or connect to computer.
4. Do not connect the USB port of this unit to other external power charger USB
ports, it may damage both units and void the warranty.
Note:
1.) Some smartphones and portable devices use proprietary USB connections
and circuitry, so they may not charge when plugged into the USB port. Please
refer to your device user manual before you attempt to charge them.
2.) It is normal if the unit gets warm while the USB port is in use and charging
your smart phone or portable device.
3.) Do not charge your smart phone over 12 hours continuously. Disconnect your
smart phone or other portable device from the USB cord once it is fully
charged.
12
FLASHLIGHT
Flashlight
Press the LIGHT button once to turn on the flashlight, , press it again to turn it off.
SOS Signal
Press the SOS button once to turn on flashlight in SOS signal mode, press it again to
turn it off.
Note: The Flashlight & SOS power is independant of the Power button.
CARE AND MAINTENANCE
1.
2.
3.
Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
•
To prevent fire or shock hazard, disconnect your unit from the USB port of power
source when cleaning.
•
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.
•
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
•
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
13
TROUBLESHOOTING GUIDE
Symptom
No
Charging
No Sound
Possible Problem
The USB power adaptor
(not included) is not
plugged into a wall outlet
or the USB cable
(included) is not plugged
into the micro USB jack
on the SFA900
Solution
Plug the USB power adaptor (not
included) into a wall outlet and plug the
USB cable (included) into the micro USB
jack on the SFA900
Wall outlet is not
functioning.
Computer USB port is
not functioning.
Speaker batteries are
dead
Bluetooth speaker is
not linked with the cell
phone
Speaker placement
out of range
Plug another device into the same
outlet to confirm the outlet is working.
Make sure your computer power is
turned on and try another USB port.
Recharge the speaker batteries
Go through “Bluetooth Operations”
process to link the speakers.
Relocate the speaker within
Bluetooth operating range
Press the Volume+ button to turn the
sound level up.
Volume set too low
Volume level is set too
high.
Sound is
distorted.
Unit gets
warm after
extended
play at high
volume.
Decrease the volume.
Sound source is
distorted.
If the cell-phone original sound
source is of poor quality, distortion
and noise are easily noticed with
high-power speakers. Try a different
audio source such as a music CD.
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on the
device itself. Also try turning bass
boost OFF or change the EQ setting.
This is normal.
Turn the unit off for a period of time
or lower volume.
14
SPECIFICATIONS
Power Requirement
DC Input
DC 5V 500mA (Micro USB)
Built-in 2 X DC 3.7V 2000mAh rechargeable Li-ion Battery
©2014 BRK Brands Inc. All rights reserved. First Alert® is a registered trademark of the
First Alert Trust.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Spectra Merchandising Intl, Inc. is under
license. Other trademarks and trade names are those of their respective owners.
At Spectra, environmental and social
responsibility is a core value of our business.
We are dedicated to continuous
implementation of responsible initiatives with
an aim to conserve and maintain the
environment through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on
Spectra’s green initiatives or to find a recycler in your area.
1 YEAR LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
This product is manufactured, distributed or sold by SPECTRA MERCHANDISING
INTERNATIONAL, INC., official licensee for this product. All right, title and interest to
use the “First Alert” logo trademarks and the “First Alert” trade dress are exclusively
licensed by BRK Brands, Inc. and are used under license from BRK Brands, Inc..
Please contact SPECTRA’s Service Department for questions/comments, warranty,
support, or service related to this product.
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants that this product 1) is
free from defects in materials and workmanship and 2) conforms to its specifications for
a period of 1 year from the date of original customer purchase and provided the
product is utilized within the U.S.A. This warranty is not assignable or transferable. Our
obligation under this warranty is the repair or replacement of the defective unit or any
part thereof, except batteries, when it is returned to the SPECTRA Service Department,
accompanied by proof of the date of original consumer purchase, such as a duplicated
copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for
warranty service. If the product is repaired or replaced under warranty, the return
charges will be at SPECTRA’s expense. There are no other express warranties other
than those stated herein.
15
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated
b. It has not been subjected to accident, misuse, abuse, improper service,usage
outside the descriptions and warnings covered within the owner’s manual or nonSPECTRA approved modifications
c. Claims are made within the warranty period
2. This warranty does not cover damage or equipment failure caused by electrical
wiring not in compliance with electrical codes or SPECTRA owner’s manual
specifications, or failure to provide reasonable care and necessary maintenance as
outlined in the owner’s manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when
products are used in a nonresidential environment or installed outside the United
States.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and
pack the unit carefully and send it prepaid by insured parcel post or UPS to SPECTRA
at the address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY
PERIOD shown above, please include a proof of purchase (dated cash register receipt)
so that we may establish your eligibility for warranty service and repair of the unit
without cost. Also include a note with a description explaining how the unit is defective.
A customer service representative may need to contact you regarding the status of
your repair, so include your name, address, phone number and e-mail address to
speed the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for
$ 30.00 to cover the cost of repair, handling and return postage. All out of warranty
returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at
[email protected] for updated information on the unit requiring service. In
some cases the model you have may be discontinued and SPECTRA reserves the
right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link below on the website to enter your information.
http://www.spectraintl.com/wform.htm
0514
Printed in China
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement