ELE7081 - Skywalker AV Supply

ELE7081 - Skywalker AV Supply
EXTENDER
ELE7081
HDMI Extender Over Single CAT5e/6 Cable
INSTALLATION MANUAL
INTRODUCTION
Dear customer,
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating, or adjusting this product. Please
keep this manual for future reference.
Our series of HDMI converters, switches, extenders, matrixes, and splitters are designed to
make using your A/V device more convenient, more comfortable, more productive, and more
cost-efficient.
The ELE7081 HDMI Extender transmits signal over one Cat5e/6 cable to extend your HDTV
display up to 60m at 1080i and 40m at 1080p. It is equipped with HDMI connections. It also
supports DVI equipment when using an HDMI to DVI adapter. It provides an easy and affordable cabling solution for integrating home theater components.
Features

Extends HDMI signal over one Cat5e/6 cable

HDMI 1.3 compliant

Transmission range: Up to 60m at 1080i / Up to 40m at 1080p

Built in Auto EQ for easy plug and play

Transmitter unit has built in EDID auto backup function

No external power required at receiver unit for distances under 30m

HDCP compliant
Transmitter
Receiver
2
Package Contents

ELE7081 Transmitter (x1)

ELE7081 Receiver (x1)

Power Adapter (x2)
Specifications

Video Bandwidth: 2.25 Gbps (HDMI 1.3)

Resolution: 480i, 480p, 720p, 1080i, 1080p @ 24/50/60 Hz

Transmission Distance: 60m @ 1080i / 40m @ 1080p

Input TMDS Signal: 1.2 Volts peak to peak

Input DDC Signal: 5 Volts peak to peak

HDMI Connector: 19-pin HDMI type female connector

Cat5e/6 Connector: RJ-45 Shileded with 2 indicator LEDs

Power Supply: 5V DC, 2 AMP regulated (External x2)

Tx Power Consumption: 1200mA Max

Rx Power Consumption: 700mA Max

Operating Temperature: 0°-55° C / 95% Humidity

Storage Temperature: -20°-85° C / 95% Humidity

Dimensions (WxHxD): 167mm x 67mm x 27mm (each unit)

Tx Weight: 180g

Rx Weight: 170g
3
TX UNIT / RX UNIT
Transmitter
Front/back

HDMI Input

Indicator LED

Power Input

EDID Setting

RJ-45 Output
EDID Setup
LED Indication
Default

Move DIP Switch 1 off (up)
BLUE
On

Move DIP Switch 2 off (up) for option 1,
supports 1080i / LPCM 2 Channel
BLUE
Flash

Move DIP Switch 2 on (down) for option 2,
supports 1080p / LPCM 5.1 Channel
External

Move DIP Switch 1 on (down) & unplug

Connect Tx to TV using HDMI cable fo
auto backup

Reconnect power to complete TV EDID
backup, Blue LED will keep fashing

Reset power on Tx to activate new EDID
4
Power On
TV EDID Backup Complete
GREEN
On
Sending Power or Video to Rx Unit
YELLOW
On
No Data Input or Unsupported Video Format
DIP Switch Function
1
UP
Use Default EDID
1
DOWN
2
UP
2
DOWN
Select Default EDID Option 2 (1080p, 5.1CH)
3
Reserve
NOTE: Do Not Move To DOWN
4
Reserve
NOTE: Do Not Move To DOWN
Use Backup TV EDID
Select Default EDID Option 1 (1080i, 2CH)
Receiver
Front/back

HDMI Output

Indicator LED

Power Input

RJ-45 Input
LED Indication
BLUE
On
External Power Adapter In Use
GREEN
On
Power & HDMI Signal from Tx Unit
YELLOW
On
No Data Input or Weak Signal
Cable
Transmission

Use High Quality Cat5e UTP or Cat6 UTP Cable

Cat6 Is Recommended For Distances Over 30m

Distance May Vary Based On Different HDMI Equipment & Cable Quality
RJ-45 Define (use TIA/EIA-568-B)
Transmission Distance
1
Orange/White
TMDS DATA2 +
1080p
Cat5e
40m
2
Orange
TMDS DATA2 -
1080p
Cat6
45m
3
Green/White
TMDS CLOCK + / HDMI 5V
1080i
Cat5e
60m
4
Blue
TMDS DATA1 +
720p
Cat5e
60m
5
Blue/White
TMDS DATA1 -
6
Green
7
Brown/White
TMDS DATA0 +
8
Brown
TMDS DATA0 -
TMDS CLOCK - / HDMI 0V
Caution:
The cabling must away from any equipment with
electromagnetic waves, such as microvave ovens,
mobile phones, radio equipment, power lines, etc.
5
NOTICE
Performance Guidelines

Be sure to use the product as directed to maximize the performance quality and the
operational lifetime of your hardware.

Be sure to place the device in a suitable environment. Do NOT place in damp, dusty,
erosive, or oxidative areas. Keep out of high-temperature locations as well as any other
extreme conditions.

Be sure the hardware is safe and secure. Do NOT install in areas exposed to heavy
motion or places that put the hardware at risk of falling.

Do NOT touch the power adapter with wet hands.

Do NOT pull on the power supply cord under any circumstance.

Be sure to turn the power off when not in use.

Do NOT open hardware, remove cover, or touch any parts within the device.

For best result, be sure to use the factory supplied power adapter.

Before powering on, be sure to check the connections carefully for accuracy.
Troubleshooting

No Power...First, double check the connections at both ends of the power supply. Also,
be sure the power switch is in the on position.

No Picture...First, make sure the display is powered on and that the devices are properly
connected. Then, confirm the status of the source device is powered on and transmitting
signal. If the problem persists, check the signal quality at each connection by testing
each cable and each connection in the signal path. (NOTE: Cables should be HDMI V1.3
compliant.)

Obscure Picture...First, try re-connecting the each cable to eliminate any poor connections. If the problem persists, check the signal quality at each connection by testing
each cable and each connection in the signal path. (NOTE: Cables should be HDMI V1.3
compliant.)
6
EXTENDER
ELE7081
HDMI Extender Over Single CAT5e/6 Cable
engineeredby
www.skywalker.com
9390 Veterans Memorial Pkwy, O’Fallon, MO 63366
(800) 844-9555 | [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement