Multimedia Products for HDMI and DVI
Product Catalog
2012
Route - Transport - Extend - Convert - Scale
Multimedia Products for HDMI and DVI
3G
sdi
OCT-2010-C
www.pesa.com
1-800-328-1008
INPUT 2
INPUT 4
OUTPUT 2
OUTPUT 4
OUTPUT 6
OUTPUT 8
INPUT 6
INPUT 8
INPUT 1
INPUT 3
OUTPUT 1
OUTPUT 3
OUTPUT 5
OUTPUT 7
INPUT 5
INPUT 7
RS-232
RS-232
Quick Reference Guide
INPUT 1
INPUT 3
INPUT 2
INPUT 4
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
OUT 8
PRO-8X8-DVI
8X8 DVI ROUTER
INPUT 5
INPUT 7
INPUT 6
INPUT 8
PRO-8X8-HDMI-CAT
8X8 HDMI ROUTER
w/CAT5/6 EXTENDERS
HDMI Output
+5V DC
Transmitter
HDMI Signal Input
+5V DC
+5V DC
Receiver
PRO-HDMI2HD
HDMI INPUT TO
3G/HD/SDI OUTPUT
HDMI Input
OUT 1
OUT
OUT 2
OUT
HDMI Output
IN
OUT
CONTROL
PRO-3GPG
3G/HD/SD PATTERN
GENERATOR
W / HDMI INPUT
HDMI Input
PRO-HDMI-BNC
HDMI VIDEO
OVER ONE COAX
RECEIVER UNIT
CATx INPUT
HDMI OUTPUT
8 units per system.
OUT
PRO-HD2HDMI
3G/HD/SD VIDEO
TO HDMI OUTPUT
W/ LOOPING HD/SD
+5V DC
+5V DC
HDMI Signal Input
Receiver
Transmitter
HDMI Signal Out
Mode
Mode
PRO-HDMI-CAT-PLG
HDMI EXTENDER TX
AND RX PLUG OVER CAT5/6
HDMI Signal Out
PRO-DVI-CAT
DVI EXTENDERS
OVER CAT5/6
Receiver
+5V DC
Signal Level
HDMI Input
Transmitter
Mode
PRO-HDMI-CAT
HDMI EXTENDERS
OVER CAT5/6
Receiver
HDMI Output
Transmitter
HDMI Input
Receiver
Transmitter
page 9
2
PRO-DVI-CAT-PLG
DVI DIRECT PLUGS
OVER CAT5/6
www.pesa.com
1-800-328-1008
8X8 HDMI Matrix
PESA Part No. PRO-8X8-HDMI-CAT
RS-232
OUTPUT PORT
INPUT 1
INPUT 3
INPUT 2
INPUT 4
OUT 1
OUT 2
OUT 3
OUT 4
INPUT CHANNEL
OUT 5
The PRO-8X8-HDMI-CAT is an 8x8 HDMI over CAT5 Matrix with IR Control Path that
provides the most flexible and cost effective solution in the market to route high
definition video sources plus multi-channel (up to 7.1-channel) digital audio from any
of the eight HDMI sources to the remote displays at the same time. Through low cost
CAT5/5e LAN cables, not only can high quality video and audio be transmitted to the
display sites, but also users can switch among 8 HDMI sources using the push button
or remote control. With a single power design at the source site, each remote module
is easily installed without power supply. Further, the built-in IR extension function
allows remote users access to the DVD player, PS3 or any HDMI equipped devices
directly.
TECHNICAL
HDMI Compliance
HDCP Compliance
Video Bandwidth
Video Support
Audio Support
HDMI over Cable (1080p)
HDMI over Cable (1080i/720p)
HDMI Equalization
Input TMDS signal
Input / Output Switcher Ports
Input / Output on
Remote Modules
HDMI Connector Style
RJ-45 Connector Style
IR Remote
RS-232 Connector Style
IR Connector Style
DIP Switch Settings
HDMI 1.3c
Yes
Singlelink 225MHz (6.75Gbps)
480i/480p/720p/1080i/1080p60
Surround Sound (up to 7.1) or Stereo Audio
35m (115ft) over CAT5e
40m (130ft) over CAT6
50m (165ft) over CAT5e
55m (180ft) over CAT6
8 level digital rotary control
1.2V p-p
Inputs – HDMI
Outputs – RJ-45 (TMDS)
Outputs – RJ-45 (DDC)
Outputs – 5X IR socket for IR blaster
Input – RJ-45 (TMDS)
Input – RJ-45 (DDC)
Output – HDMI
Ouput – IR socket for IR receiver
Type A (19 pin female)
WE/SS 8P8C with LED indicators
Electro-optical 38kHz
9 Pin D-Sub
3.5mm earphone jack
(SW-1 – SW8) EDID and audio settings
(SW Main) 4 Pin mode and firmware updates
OUT 6
OUT 7
OUT 8
INPUT 5
INPUT 7
INPUT 6
INPUT 8
FEATURES:
HDMI 1.3c compliant
HDCP compliant
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any source at any time
Supports 7.1 channel digital audio
Flexible EDID management
Dimensions for Switcher
Dimensions for Receivers (X8)
Mounting Style for Switcher
Mounting Style for Receivers
Power Input
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
HDMI Output
+5V DC
HDMI Signal Input
3
CONTROL
17” X 11.4” X 1.7” (440mm X 290mm X 44mm)
3.5” X 3.3” X 1” (90mm X 85mm X 25mm)
1RU with removable mounting ears
Throw-down with wall-mount ears
100-240VAC, 50/60Hz
60 W (max)
0 - 40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% ( non condensing)
1X – 8X8 Switcher
2X – Mounting Ears
1X – IR remote control
8X – IR receivers
8X – Receiver (RX)
1X – User Manual
RECEIVER UNIT
CATx INPUT
HDMI OUTPUT
8 units per system.
www.pesa.com
1-800-328-1008
8X8 DVI Matrix
PESA Part No. PRO-8X8-DVI
RS-232
OUTPUT PORT
INPUT CHANNEL
INPUT 2
INPUT 4
OUTPUT 2
OUTPUT 4
OUTPUT 6
OUTPUT 8
INPUT 6
INPUT 8
INPUT 1
INPUT 3
OUTPUT 1
OUTPUT 3
OUTPUT 5
OUTPUT 7
INPUT 5
INPUT 7
PESA’s PRO-8X8-DVI is an 8 input and 8 output DVI matrix switcher for DVI-D resolutions
from [email protected] to [email protected] including all HDTV resolutions for 720p and
1080p. Based on the DVI DDWG 1.0 standard for single link, the PRO-8X8-DVI allows any
source to be displayed on multiple monitors at the same time. The PRO-8X8-DVI contains
default EDID and learns the EDID from each display connected. The user switches the panels
from a local push button selection, an IR remote, or from an RS-232 control interface. Housed
in a compact 1RU high chassis, the PRO-8X8-DVI can be table mounted or rack mounted
with the included mounting ears. The unit is supplied with a remote control for IR settings and
a CD with setup software.
TECHNICAL
Specifications
Number of Inputs
Number of Outputs
Video Bandwidth
Video Resolutions
EDID
Control Options
Settings
Mechanical
Weight
Power
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Compliant with DDWG 1.0 (1999)
8 DVI-D ( 29 pin female)
8 DVI-D ( 29 pin female)
Singlelink (165MHz)
VGA (640X480) up to WUXGA (1920X1200)
1680X1050p @60Hz ( 16:9)
1920X1200p @60Hz ( 16:9)
720p and 1080p ( HDTV)
EDID emulation and learning mode
RS-232, USB, or 3.5mm for IR
Front panel pushbutton
4 pin DIP switch for USB / 232 / Firmware update
1RU
17.00 ( 440mm ) X 7.90 (200mm) X 1.70 (44mm)
Optional rack mount ears
5.9lbs / 2675g
AC Power 100-240V
60W max.
0-40 C
-20 to 60 C
20-90% RH ( non-condensing)
4
FEATURES:
• Supports up to WUXGA ([email protected])
• Matrix Switching for up to 8 DVI Inputs and 8 DVI Outputs
• Supports Video Input for 480p / 720p /1080p
• Built-in RS-232 for External Control via PC or Controller
• Fast Response time: 2-5 seconds for channel switching
• 19” Rack Mountable
• Flexible EDID Management
www.pesa.com
1-800-328-1008
HDMI Over Single Coaxial Extender
PESA Part No. PRO-HDMI-BNC
The PESA PRO-HDMI-BNC is a perfect solution for those who need
to extend HDMI signals long distance over coax cable. The PESA
HDMI extenders can handle resolutions up to 1080p at up to 60m.
Installation of the PESA HDMI over coax is quick and easy, simply
place the Transmitter unit next to your HDMI source and place the
Receiver unit next to your destination. Connect the units with coax
cable equivalent to 1694A to achieve distances up to 60m.
TECHNICAL
HDMI Compliance
HDCP Compliance
Video Bandwidth
Video Support
Audio Support
HDMI over Coax
HDMI Equalization
Input TDMS Signal
Input DDC Signal
Transmiter Input
Transmitter Output
Receiver Input
Receiver Output
HDMI Connector
BNC Connector
HDMI 1.2a
Yes
Single Link 165MHz ( 4.95Gbps)
480i / 480p / 720p / 1080i / 1080p
Surrond sound up to 7.1 or stereo audio
60m (196 ft) Full HD 1080p 24 bit color
Auto
1.2V p-p
5V p-p, TTL
1X HDMI
1X BNC
1X BNC
1X HDMI
Type A ( 19 pin female)
75 Ohm
Dimensions TX
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
2.9” X 2.9” X 1.1” (74mm X 73mm X 29mm)
5V 2A DC
3 W (max)
0-40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% ( non condensation)
1X – TX Module
1X - RX Module
1X – User Manual
2X – 5V 2A power adapter
FEATURES:
HDMI over a single coax
Perfect video quality up to 1080p/60
Supports 5.1 or 7.1 Audio
Extends up to 60m (196 ft) from the HDMI source
HDMI sources under Full HD resolution (1080p/60 24-bit color) through 1694A coaxial cable
Supports video resolutions 480i, 576i, 720p, 1080i, and 1080p
Easy to install and simple to operate
HDMI Source
HDMI Cable
HDMI Cable
HDMI Display
RECEIVER
TRANSMITTER
coax cable
5
www.pesa.com
1-800-328-1008
HDMI to 3G/HD/SD-SDI
PESA Part No. PRO-HDMI2HD
TECHNICAL
SDI Standards
Auto Standards Detection
Video Bandwidth
Video Support 3G-SDI
The PESA PRO-HDMI2HD provides a professional way to convert
HDMI to HD/SD SDI in real time. The conversion between SDI and
HDMI is pure digital and guarantees no loss transformation for both
audio and video. Plus, with up to 8 channels audio support, 7.1
channel or 5.1 channel audio becomes available. The
PRO-HDMI2HD also provides 2 low jitter SDI outputs for daisy chain
or multiple monitors. With the use of PRO-HDMI2HD, the most
popular uncompressed video interface in the consumer world is
readily available for professional SDI equipment.
Video Support HD-SDI
FEATURES:
Loop Out
Input Connectors
Outputs
BNC type
HDMI connector
DIP Switch Connector
Dimensions
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
SD-SDI, HD-SDI, 3G-SDI
Yes
2.97Gbps
1080p50/59.94/60 (4:2:2)
1080p 23.97/24/25/29.97/30 (4:4:4)
1080i50/59.94/60 (4:4:4)
720p24/25/50/59.94/60 (4:4:4)
720p50/59.94/60
1035i50/59.94/60
1080i50/59.94/60
1080p24/30
SD at NTSC 59.94Hz / PAL 50Hz
SMPTE 259M, 292M, 296M, and 424M
HDMI (DVI with adapter)
75 Ohm
7.1, 5.1, Stereo
60m (200ft) for 3G-SDI
150m (500ft) for HD-SDI
300m (1000ft) for SDI
2 Equalized and reclocked
1X – HDMI/DVI
2X – BNC
75Ohm
Type A (19 pin female)
Video format / Audio format / groups
6.3” X 4.3” X 1” (160mm X 110mm X 25mm)
5V 4A DC
3 W (max)
0-40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% ( non condensation)
1X – Module
1X – User Manual
1X – 5V 4A power adapter
Output Signal Type
Input Signal Type
Impedance
Audio Mode
Cable Equalization
Supported high-definition (HD) formats:
NTSC [email protected], PAL [email protected]
[email protected], [email protected], [email protected], [email protected], [email protected],
[email protected],[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected]
Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
Auto 3G/HD/SD-SDI detection
HDMI 1.2 supported
Two SDI compliant outputs
External DIP Switch Configuration
HDMI Cable
P/N: PRO-HDMI2HD
coax cable
HDMI/DVI Source
HD/SDI Monitor
6
HD/SDI Monitor
www.pesa.com
1-800-328-1008
3G/HD/SD-SDI to HDMI
PESA Part No. PRO-HD2HDMI
Technical
SDI Standards
Auto Standards Detection
Video Bandwidth
Video Support 3G-SDI
Video Support HD-SDI
The PESA PRO-HD2HDMI provides a cost effective way to convert
HD/SD-SDI signal to HDMI compliant format. The conversion
between SDI and HDMI is pure digital and guarantees no loss
transformation for both audio and video. Plus, with up to 8 channels
audio support, 7.1 channel or 5.1 channel audio becomes available.
The PRO-HD2HDMI also provides 2 low jitter and re-clocked outputs
for daisy chain or multiple monitors out.
FEATURES:
Auto 3G/HD/SD-SDI detection
Supported standard-definition (SD) formats:
NTSC @59.94Hz, PAL @50Hz
Supported high-definition (HD) formats:
1080i @50/59.94/60Hz, 1035i @50/59.94/60Hz,
720p @50/59.94/60Hz
Supported 3G formats(SMPTE 425M, Level A):
1080p @50/59.94/60Hz (4:2:2), 1080p @24/25/30Hz (4:4:4), 1080i
@50/59.94/60Hz (4:4:4), 720p @24/25/50/59.94/60Hz (4:4:4)
2 equalized and re-clocked loop outputs
External DIP Switch Configuration
Input Signal Type
Output Signal Type
Impedance
Audio Mode
Cable Equalization
Loop Out
Input Connectors
Outputs
BNC Type
HDMI Connector
VGA Connector
DIP Switch Connector
Dimensions
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
SD-SDI, HD-SDI, 3G-SDI
Yes
2.97Gbps
1080p50/59.94/60 (4:2:2)
1080p24/25/30 (4:4:4)
1080i50/59.94/60 (4:4:4)
720p24/25/50/59.94/60 (4:4:4)
720p50/59.94/60,
1035i50/59.94/60,1080i50/59.94/60
1080p24/30
SD at NTSC 59.94Hz / PAL 50Hz
SMPTE 259M, 292M, 296M, and 424M
HDMI (DVI with adapter)
75 Ohm
7.1, 5.1, Stereo
60m (200ft) for 3G-SDI
150m (500ft) for HD-SDI
300m (1000ft) for SDI
2 Equalized and reclocked
1X – BNC
1X – HDMI/DVI
2X – BNC
75Ohm
Type A (19 pin female)
HD-15 (15 d-sub)
Output / Audio / Audio Group / Level Control
6.3” X 4.3” X 1” (160mm X 110mm X 25mm)
5V 4A DC
2 W (max)
0-40C ( 32-104F)
-20 to 60C (-4 to 140F)
20 to 90% ( non condensation)
1X – Module
1X – User Manual
1X – 5V 4A power adapter
coax cable
P/N: PRO-HD2HDMI
HD/SDI Source
HD/SDI Display
HDMI Cable
HD/SDI Display
HDMI Display
7
www.pesa.com
1-800-328-1008
HDMI over CAT5/6
PESA Part No. PRO-HDMI-CAT
With only one cost effective CATx cable, users can readily extend HDTV
sources from DVD players, Blu-ray Disc player, PS3, PC, and any other DVI
and HDMI compliant device to distant display monitors including HDMI/DVI
enabled TV sets or LCD PC monitors. The PESA PRO-HDMI-CAT Extender
boosts your video/audio transmission distance up to 60m (200ft) in HDTV
1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV
1080p with 36 bit color depth. Using the latest in HDMI technology, this
device supports deep color video, DTS-HD or Dolby True HD audio. HDCP
compliant devices such as DVD players, entertainment gaming devices, and
set top boxes can have their signal extended greater distances a minimal
cost.
The PRO-HDMI-CAT includes two units: transmitting (TX) and receiving (RX)
units. The transmitting unit is used to capture the input HDMI/DVI signals
and carry the signals through one RJ-45 connector into one cost effective
CAT-5/5e/6 cable. The receiving unit is responsible for equalizing the sent
TMDS multimedia data. With an 8-level equalization control knob on the
receiving unit, users can adjust the equalization strength to the received
TMDS signals accordingly, and therefore optimize the transmission distance
between source and destination.
Technical
HDMI Compliance
HDCP Compliance
Video Bandwidth
Video Support
Transmission over Cable (1080p)
Transmission over Cable (1080i/720p)
Audio Support
Input TMDS Signal
Input DDC Signal
Input / Output Type
FEATURES:
* HDMI 1.3c compliant
* 720p or 1080i up to 60m (200ft) from the HDMI source
* 1080p/8bit color up to 40m (130ft) from the HDMI source
* 1080p/12bit color up to 20m (65ft) from the HDMI source
* HDCP compliant
* 8 Level equalization control to minimize skew
* 7.1 digital audio over CAT-5/5e cable
* Supports DTS-HD and Dolby True HD high bit rate audio
HDMI Connector Style
RJ-45 Connector Style
Rotary Switch
Dimensions
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
HDMI 1.3c
Yes
Singlelink 165Mhz
480i/480p/720p/1080i/1080p60
Up to 36-bit color depth
40m (130ft) over CAT5e
50m (165ft) over CAT6
50m (165ft) over CAT5e
60m (200ft) over CAT6
8 Level Digital Control at RX
1.2V p-p
5V p-p, TTL
TX unit – HDMI to RJ-45
RX unit – RJ-45 to HDMI
Type A (19 pin female)
WE/SS 8P8C with LED indicators
TX = Mode adjust, RX = EQ adjust
3.7” X 2.4” X 1” (93mmX60mmX25mm)
5V 2A DC
4W max (TX), 1.5W max (RX)
0-40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% (non condensation)
1X – Transmitter (TX)
1X – Receiver (RX)
1X – User Manual
2X – 5V 2A power adapter
HDMI Cable
HDMI Cable
CAT 5/6 Cable
HDMI/DVI Display
HDMI/DVI Source
8
www.pesa.com
1-800-328-1008
HDMI over CAT5/6 TX with direct plug RX
PESA Part No. PRO-HDMI-CAT-PLG
The PESA PRO-HDMI-CAT-PLG can boost your HDMI or DVI
video/audio transmission distance up to 25m (80ft) in HDTV. With
only one cost effective CATx cable, users can directly plug the
receiver into HDTV sources from DVD players, Blu-ray Disc player,
PS3, PC, and any other kinds of HDMI compliant devices to distant
display monitors including HDMI/DVI enabled TV sets or LCD PC
monitors. This cost effective flexibility allows HDCP compliant DVD
players or PS3 players to transmit high quality video and audio
greater distances at minimal cost.
The PRO-HDMI-CAT-PLG includes two units: transmitting (TX) and
receiving (RX) direct plug connector. The transmitting unit is used to
capture the input HDMI/DVI signals and carry the signals through one
RJ-45 connector into one cost effective CAT-5/5e/6 cable. The
transmission distance between the sending and receiving units can
be up to 25m (80ft) under HD (720p/1080i) or 15m (50ft) under Full
HD (1080p60). With a direct plug to the display, users do not need a
power outlet normally required for traditional HDMI over CAT5
receivers.
Technical
HDMI Compliance
HDCP Compliance
Video Bandwidth
Video Support
Transmission over Cable (1080p)
Transmission over Cable (1080i/720p)
Features:
* HDMI 1.3c compliant
* 1080i or 720p up to 25m (80ft) from the HDMI source
* 1080p up to 15m (50ft) from the HDMI source
* HDCP compliant
* Supports 7.1 digital audio over CAT 5/5e cable
* RX allows direct plug-in to HDMI displays
Input TMDS Signal
Input DDC Signal
Input / Output Type
HDMI Connector Style
RJ-45 Connector Style
Rotary Switch
Dimensions
,
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
HDMI 1.3c
Yes
Singlelink (165Mhz)
480i/480p/720p/1080i/1080p60
Up to 36-bit color depth
15m (50ft) over CAT5e
18m (65ft) over CAT6
25m (80ft) over CAT5e
30m (100ft) over CAT6
1.2V p-p
5V p-p, TTL
TX unit – HDMI to RJ-45
RX unit – RJ-45 to HDMI
Type A (19 pin female)
WE/SS 8P8C with LED indicators
TX = Mode adjust
3.7” X 2.4” X 1” (93mm X 60mm X 25mm)
RX is direct-plug unit
5V 2A DC
1 W (max)
0-40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% (non condensation)
1X – Transmitter (TX)
1X – Receiver (RX)
1X – User Manual
2X – 5V 2A power adapter
HDMI Cable
CAT 5/6 Cable
HDMI/DVI Display
HDMI/DVI Source
9
www.pesa.com
1-800-328-1008
DVI over CAT5/6 ( Direct Plug)
PESA Part No. PRO-DVI-CAT-PLG
The PESA PRO-DVI-CAT-PLG extends your PC DVI transmission distance up to 30m/100ft with resolution
1024x768 @60Hz or 15m /50ft with resolutions up to [email protected] With the PRO-DVI-CAT-PLG, users can
transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote monitor or
projector, instead of using short and expensive DVI cables. With embedded EDID inside the extender, your PC will
continue to send the digital video even when the monitor is not connected. The user can then disconnect the
monitor, place it in a remote location and reconnect it without rebooting the operating system.
The PRO-DVI-CAT-PLG includes two identical units: transmitting and receiving units. The transmitting unit is
connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected,
the two LED lights on RJ-45 connector will blink. With a compact size and requiring no power, the
PRO-DVI-CAT-PLG is the most cost effective choice for bringing your impressive digital video to a remote display.
Handy DVI-D to RJ-45 Adaptor
DVI 1.1 compliant
■
Extend the transmission distance up to 30m/100ft from the sources at XGA
■
Extend the transmission distance up to 15m/50ft from the sources at WUXGA
■
LED indicators
■
Compact size
■
■
DVI over CAT5/6 with Direct Plug TX
PESA Part No. PRO-DVI-CAT
The PESA PRO-DVI-CAT extends your PC DVI transmission distance up to 60m/200ft with resolution 1024x768
@60Hz or 30m/100ft for [email protected] With the PRO-DVI-CAT, users can transmit high quality digital video of
PC applications through one cost effective CAT-5/5e to the remote monitor or projector, instead of using short and
expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the digital video
even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location
and reconnect it without rebooting the operating system.
The PRO-DVI-CAT includes a direct-plug transmitter unit and a wall mounted receiver unit. The transmitting unit is
connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected,
the two LED lights on RJ-45 connector will blink. With a compact size, the PRO-DVI-CAT is a cost effective choice
for bringing impressive digital video to any remote display.
Extend the transmission distance up to 60m/200ft from the sources at 1280x1024
Extend the transmission distance up to 30m/100ft from the sources at 1920x1200
■
Direct-plug TX and wall mounted RX
■
Supports up to 1080i/1080p video and VESA standards up to WUXGA
■
■
Receiving unit can learn EDID information for DVI/HDMI enable display device
Minimize the cable skew by adjustable equalization with 8 levels
■
HDTV resolution & VESA standards are supported
■
■
10
www.pesa.com
1-800-328-1008
3G/HD/SD/HDMI Pattern Generator
PESA Part No. PRO-3GPG
Technical
SDI Standards
Auto Standards Detection
Supported Protocols
Video Support
The PRO-3GPG is an advanced 3G/HD-SDI pattern generator with
multi-format (HD/SD) and multi-pattern support. In addition to still and moving
video test patterns, other features such as VANC (SMPTE-334M) are provided.
With a small portable size, the PRO-3GPG is equipped with four buttons and
LCD screen for quick review of the controls screens. This device provides a
cost effective way to calibrate and test 3G/ HD-SDI video devices and displays.
Output Signal Type
Input Signal Type
Impedance
Audio Mode
Cable Equalization
Loop Out
Output Connectors
Input Connector
BNC type
HDMI connector
Dimensions
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Package Content
SD-SDI, HD-SDI, 3G-SDI
Yes
SMPTE 259M (270Mbs, 360Mbps)
DVB ASI (270Mbps)
SMPTE 292 (1.485Gbps / 1.485/1.001Gbps)
SMPTE 424M (2.97Gbps)
1080p50/59.94/60 (4:2:2)
1080p24/25/30 (4:4:4)
1080i50/59.94/60 (4:4:4)
720p24/25/50/59.94/60 (4:4:4)
720p50/59.94/60,
1035i50/59.94/60,1080i50/59.94/60
1080p24/30
SD at NTSC 59.94Hz / PAL 50Hz
SMPTE 259M, 292M, 424M, 425M, ASI
HDMI (DVI with adapter)
75 Ohm
Tone
60m (200ft) for 3G-SDI
150m (500ft) for HD-SDI
300m (1000ft) for SDI
2 Equalized and reclocked
2X – BNC
1X - HDMI
75Ohm
Type A (19 pin female)
6.3” X 4.3” X .08” (160mm X 110mm X 20mm)
5V 4A DC
10 W (max)
0-40C (32-104F)
-20 to 60C (-4 to 140F)
20 to 90% (non condensation)
1X – Module
1X – User Manual
1X – 5V 4A power adapter
FEATURES
Supported output resolution
NTSC [email protected], PAL [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],[email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected]
Bit Rate:
1.485 Gb/s, 1.4835 Gb/s, 270Mb/s
Resolution:
10bit
Video Patterns
100% Color Bars, Borderline, Random Noise, Check Field, Black,
Vertical Lines, Black / White alternate fields, Full Grey / Full White,
Black to White Gradient, Random Generator for all still patterns,
moving squares White noise, Inverse effect with still pattern, Scrolling
Title
Save Settings to Memory Option
ANC Data
Control
VIDEO PATTERNS
EDH (RP-165), SMPTE 352M, SMPTE 334M, SMPTE-12M
Liquid Crystal Display (LCD) & Panel Buttons
11
ORDERING INFORMATION
USA Corporate Headquarters
PESA
103 Quality Circle, Suite 210
Huntsville, Alabama 35806
TEL: +1 256-726-9200
FAX: +1 256-726-9271
[email protected]
Warranty:
Products manufactured by PESA are manufactured for performance and
reliability. PESA warrants these products against defects and
workmanship for a period of one year.
Services:
Customer service support is available 24 hours a day, 7 days a week by
calling 1-800-323-7372.
International customers call +1 (256) 726-9222.
In addition to our Customer service support center, we offer extended
warranties and online technical resources via our website at:
www.pesa.com
On site or factory training is available for control system operations,
technical, and maintenance training. Contact our technical support group
for additional information.
Spares can be ordered through your area sales representative.
Specifications subject to change without notice.
www.pesa.com
MKTDOC-0010A311
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement