INSTEON 2672-222 Owner's manual

INSTEON 2672-222 Owner's manual
INSTEON LED Bulb 2672-222
Owner’s Manual
Contents
Getting Started
INSTEON LED Bulb
Device Overview
4
Do Not Connect to a Dimmer
Leave Your Fixture On
Linking
INSTEON Links
Understanding Linking Linking to the INSTEON Hub using the iOS or Android App
Linking with a Single-Button Controller
Linking with a Multi-Button Controller
Multi-Linking or Making a Scene
Unlinking from a Single-Button Controller
Unlinking from a Multi-Button Controller
Multi-Unlinking or Removing a Scene
Software-Only Features
Ramp Rate
Disable Linking on Power-up
Always-On Wiring
Always-On Wiring
Always-On Wiring
Appendix
Specifications
Troubleshooting
Certifications and Warnings
Product Warranty
6
8
9
10
11
12
13
14
16
18
19
22
24
25
26
Getting Started
Everything you need to quickly get up and running.
3
INSTEON LED Bulb
Device Overview
Do Not Connect to a Dimmer
INSTEON LED Bulb dims using INSTEON
commands.
INSTEON ID
X
Leave Your Fixture On
If your switch is OFF, communication with the
LED Bulb is lost.
Linking
Your LED Bulb does not have a set button.
To link manually, unscrew the LED Bulb for a
moment and reinsert.
ON
ON
?
If your fixture is controlled by a wall
switch, consider wiring as always-on.
4
INSTEON Links
INSTEON devices can stand alone and function as a local switch or
dimmer, but their real power comes when they are connected together to
form a control system. Most INSTEON devices can control one another
and be the recipient of control. The process of associating multiple
INSTEON devices to one another is called linking.
5
Understanding Linking
Links are One-Way
When linking INSTEON devices, the links that
are created are one-way.
Links Remember a Device’s State
The current state of the controlled device is
stored in the link: on, off or dimmed.
NEW
NEW
75%
A
B
Switch A will turn Switch B on and off but
Switch B cannot turn Switch A on or off.
X
Controllers
INSTEON devices that can turn other devices
on or off are called controllers.
Switch
Lamp Dimmer
The switch will turn on the Lamp Dimmer to
75% brightness.
X
Responders
INSTEON devices that receive the command of a
controller are called responders.
NEW
NEW
On
Off
Neutral
N
N
Set
Load L1
Line
Sensors, Switches, Keypads and the
Hub are common controllers.
X
L
Switches, Keypads, Plug-In Modules and
In-Line Modules are common responders.
X
6
Understanding Linking
Controller-Only
Some devices, like sensors, can only control
other devices.
Responder-Only
Some devices cannot control other devices;
these devices only receive INSTEON commands.
NEW
NEW
X
X
Motion Sensor
Dimmer Switch
The Motion Sensor will turn on the Switch
but the switch cannot control the Motion
X
Sensor.
Grouping Devices
You may want to group together two
devices, for example, in a virtual-three way
configuration. For INSTEON, this is called
cross linking.
LED Bulb
Some devices can only link as
responders to devices and scenes.
X
Use Cross Linking
To Cross Link, simply turn on the devices and
perform the linking process twice, once in
each direction.
NEW
Load
A
B
To mirror Switch A and B so that they each
control one another and the connected
load, Cross Linking is necessary.X
Dimmer Switch
NEW
A
B
Link Switch A to Switch B and repeat to link
Switch B to Switch A.
X
7
Linking to the INSTEON Hub using the iOS or Android App
1
From Rooms, navigate to All Devices.
2
Tap the Add button.
All Devices
Rooms
All Devices
Check-In
Favorites
Back Door
Bathroom
Bedroom
Bathroom
Bedroom
Hallway
Font Door
Garage Door
Garage Light
Kitchen
Living Room
Outside
Motion Sensor
Outside Lights
72º
72º
3
Add
Select LED Bulb from the list of
devices.
4
When prompted, turn on your fixture
and screw in the LED Bulb. The Bulb
will double-beep.
Add Device
LED Bulb
Thermostat
Door Sensor
Open/Close
Sensor
ON
You can now control your LED
Bulb from the INSTEON Hub.
8
Linking with a Single-Button Controller
1
On your INSTEON controller, press
and hold the set button until the
device beeps.
2
Make sure your fixture is On and
then screw in the LED Bulb. Your
LED Bulb will double-beep.
ON
ON
Your INSTEON controller will
now control your LED Bulb.
9
Linking with a Multi-Button Controller
1
On your INSTEON controller, tap
the desired control button and
then press and hold the set button
until the device beeps.
2
Make sure your fixture is On and
then screw in the LED Bulb. Your
LED Bulb will double-beep.
A
ON
B
ON
Your INSTEON controller will
now control your LED Bulb.
10
Multi-Linking or Making a Scene
1
On your INSTEON controller, press
and hold the set button until the
device beeps, then tap the set
button.
2
A
Adjust your scene members to
their desired state: on, off, or
brightness level if dimming.
50%
72%
LED Bulb
LED Bulb
30%
ON
Lamp 3
Appliance
B
3
One at a time, screw in your LED
Bulbs. For other devices, press
and hold the set button until they
double-beep.
4
Tap the set button on your
INSTEON controller to finish
building your scene.
ON
Your INSTEON controller will
now control your scene.
11
Unlinking from a Single-Button Controller
1
3
On your INSTEON controller, press
and hold the set button until the
device beeps.
2
Press and hold the set button
again until the device beeps.
Make sure your fixture is On and
then screw in the LED Bulb. Your
LED Bulb will double-beep.
X
ON
ON
ON
Your INSTEON controller will no
longer control your LED Bulb.
12
Unlinking from a Multi-Button Controller
1
On your INSTEON controller, tap
the desired control button and
then press and hold the set button
until the device beeps.
2
Press and hold the set button
again until the device beeps.
A
B
3
Make sure your fixture is On and
then unscrew and reinsert the LED
Bulb. Your LED Bulb will doublebeep.
X
ON
ON
ON
Your INSTEON controller will no
longer control your LED Bulb.
13
Multi-Unlinking or Removing a Scene
1
On your INSTEON controller, press
and hold the set button until the
device beeps. Press and hold the
set button again, then tap the set
button.
2
One at a time, unscrew and
reinsert your LED Bulbs. For other
devices, press and hold the set
button until they double-beep.
A
ON
B
C
3
Tap the set button on your
INSTEON controller to exit MultiUnlinking mode.
ON
X
®
®
Your INSTEON controller will no longer
control your INSTEON devices.
14
Software-Only Features
Most INSTEON devices contain features that can only be enabled,
disabled or modified using INSTEON control software such as HouseLinc
and an INSTEON PowerLine Modem.
15
Software-Only Features
Ramp Rate
Customize the speed at which the LED
Bulb fades on or off. Default is 0.5 seconds,
maximum duration of 8 minutes.
Instant
Disable Linking on Power-up
Prevents LED Bulb from entering linking
mode each time power is disconnected and
reapplied. Default is off.
 LINKING 
0.5 Seconds
2 Seconds
5 Seconds
15 Seconds
16
Always-On Wiring
Because LED Bulb needs constant power, if you have a light fixture that is
controlled by a wall switch, you might consider wiring that wall switch as
“Always-On” so that flipping the switch will not disconnect LED Bulb from
power. Replacing the wall switch with an INSTEON Switch will provide full
control for any INSTEON device in your home.
17
Always-On Wiring
1
Turn off power to your switch at the
electrical service panel.
2
Remove the old switch and
disconnect the wires. If your box
lacks neutral wires, stop and
contact support.
WIKI
ON
ON
ON
ON
1
OFF
ON
ON
or
2
!
Neutral Wire
ON
ON
ON
Circuit Breakers
Fuse Panel
½”
12mm
3
Connect the Dimmer Switch wires to the identified wires in the junction box. The red load wire is
not used and, instead, capped. Verify that the wire nuts are secure and that no exposed copper
wire is visible except for the bare ground wire.
Load
Neutral
Line
Ground
18
Always-On Wiring
4
Mount the Dimmer Switch into the
junction box with the LED bar on the
left and turn power on to the switch at
the circuit breaker panel.
5
Test your switch by tapping the paddle
to turn On and Off. Your LED Bulb will
not change but the status lights on the
switch will.
6
To link your switch to the LED Bulb,
press and hold the set button until the
device beeps.
7
Unscrew and reinsert your LED Bulb
for a moment and reinsert. Your LED
Bulb will double-beep.
ON
Your switch will now control
your LED Bulb
19
Appendix
Everything else you might need to know about your INSTEON product.
20
INSTEON Glossary
Controller
Responder
Blinking
The INSTEON transmitter
The INSTEON receiver
LED turning on and off repeatedly
Dual-Band
An INSTEON device that can send and receive both INSTEON powerline signals and
INSTEON radio frequency signals
Ramp Rate
The speed at which the load fades on or off
On-Level
The preset brightness level a device will return to when turned on
INSTEON
A dual-band, mesh networking technology developed by INSTEON. The world’s most
reliable, expandable and simple home automation and control technology.
Link
A one way association between a controller and responder
Linking
A method for associating INSTEON controller buttons with groups of INSTEON responders
such that the responders instantly return to a memorized state when the button is pushed.
Links can be made manually with the set button or using software.
Unlinking
The process by which an INSTEON device can remove stored links. Just as with linking,
unlinking is a one-way process and should be performed in both directions for devices that
are both controllers and responders of each other, as in a 3-way switch scenario.
Multi-Linking
/ Unlinking
A special mode that allows more than one link to be either created or removed
simultaneously, without laborious set button presses. When in linking or unlinking mode, an
INSTEON device will continue to link to other devices until the set button is tapped or four
minutes have elapsed, whichever occurs first.
Factory Reset
Load
On/Off
Retry
Scene
Set Button
Simulcast
X10
A process that erases all stored links and reconfigures the device to factory defaults.
The device that you are controlling (e.g. a light bulb, ceiling fan, etc.)
A device that can control its connected load to turn on and off but cannot dim. Usually a
relay-based device.
A 2nd (or subsequent) attempt by a controller to send an INSTEON signal, usually after an
acknowledge is not received from the responder in the expected time-slot.
Multiple devices respond to memorized states. For example, a dinner time scene turns
on the dining table light, dims the kitchen lights to 10%, backyard lights turn off and the
thermostat adjusts to 72º.
A button on an INSTEON device that is used for setting or changing its properties
A method for increasing the reliability of message delivery in a network. When a node in
a network sends a message, every other node that hears the message retransmits it at
precisely the same time based on a global clock, provided that the message has not already
been retransmitted some maximum number of times. Message propagation is more robust
because each node adds its energy to the signal, much like voices in a choir. Simulcasting
is much simpler than message routing because there are no routing tables to maintain and
nodes can join the network without any installation procedure.
A legacy powerline networking technology. Many INSTEON devices are backwards
compatible with X10 devices by setting a house and unit code.
21
Specifications
General
Brand
Key Application
Product Number
UPC
Patent
Warranty
INSTEON
Low energy, remote control lighting
2672-222 US
813922013023
Protected under US and Foreign Patents (see www.insteon.com/
patents)
2 years, limited
INSTEON Features
INSTEON RF
RF Frequency
Yes
915.0 MHz US
INSTEON PowerLine
Yes
INSTEON Controller
No
INSTEON Responder
Yes
Number of Responder Groups
400
Responder Commands Supported
On
Off
Fast On
Fast Off
Begin Brighten
Begin Dim
End Brighten
End Dim
Incremental Brighten
Incremental Dim
Beep
Maximum INSTEON Links
400
X10 Compatible
No
Programming Lock
Yes
22
Specifications
Operation
Lumens
Lumens per Watt
Color Rendering Index
Color Temperature
Status LED
On Levels
Ramp Rate
591
66
83.90
2700 K
None
32
0.125 seconds to 8 minutes (software-only)
Mechanical
Installation
Color
Dimensions
Weight
Operating Environment
Operating Temperature Range
Operating Humidity Range
E27 Medium Edison screw base
White
2.8” diameter, 4.7” length
72mm diameter, 119mm length
6.2 oz
176g
Indoors
-32º to 104º F
-0º to 40º C
0-90% relative humidity, non-condensing
Electrical
Supply Voltage
Local Control
All Settings Saved Through Power
Outage
Power Consumption
Certification
120 Volts AC ±10%, 60 Hz
No
Yes, all saved in non-volatile EEPROM
<0.75 Watt
ETL, FCC
23
Troubleshooting
LED Bulb won’t link to other INSTEON Devices
Your LED Bulb may be out of range of other INSTEON Devices or a large appliance may be generating electrical
noise, disrupting the INSTEON signal.
Try this:
• Check to make sure your LED Bulb is not connected to a dimmer. If so, remove the dimmer or relocate LED
Bulb to a non-dimming fixture.
•
Try relocating your LED Bulb to see if linking can be accomplished. If linking works normally in another area
of the house, consider adding additional INSTEON devices to extend and strengthen your network.
•
Some home appliances like refrigerators, televisions and speaker docks may produce excessive electrical
noise. If you’ve recently added a new electronic device to your home, unplug it and try linking again. If LED
Bulb links normally, add a powerline noise filter to the problematic appliance.
LED Bulb is slow to respond
This issue most likely lies with the controller, not your LED Bulb; the controlling device is probably repeating
commands not being acknowledged by an INSTEON device that has been removed from the network. The
repeated commands are slowing down the INSTEON network, resulting in a delayed response from the LED
Bulb.
Try this:
•
Consider if you have removed any INSTEON devices from your network that were part of the slow-torespond scene. If so, the links to these devices need to be removed from the controller. Use software to
examine the database of the controller or if you know the modules that were removed, manually remove
their links using the standard unlinking procedure.
•
If you are unable to identify the missing devices, perform a factory reset on the controller. This will remove
all links from the controller’s database but will also require that you reconfigure the device’s scenes and
properties.
LED Bulb turned on or off by itself
Most likely, a device somewhere in the house has been linked to your LED Bulb.
Try this:
• As LED Bulb automatically enters linking mode every time it is powered on, it is possible to accidentally link
a device to LED Bulb in the brief period of time that the Bulb is in linking mode. You can use software like
HouseLinc to examine LED Bulb’s links to find the stray connection.
I want to factory reset my LED Bulb
Because LED Bulb lacks a set button, there is no manual way to factory reset LED Bulb.
Try this:
• Using software like HouseLinc, manually remove all of the device links.
24
Certifications and Warnings
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15B of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio and television reception. However, there is no guarantee that interference will not occur in
a particular installation. If this device does cause such interference, which can be verified by turning the device
off and on, the user is encouraged to eliminate the interference by one or more of the following measures: •
Re-orient or relocate the receiving antenna of the device experiencing the interference • Increase the distance
between this device and the receiver • Connect the device to an AC outlet on a circuit different from the one that
supplies power to the receiver • Consult the dealer or an experienced radio/TV technician.
WARNING: Changes or modifications to this device not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CAUTION - To reduce the risk of overheating and possible damage to other equipment do not install to control
a receptacle, a motor-operated appliance, a fluorescent lighting fixture, or a transformer-supplied appliance.
Gradateurs commandant une lampe a filament de tungstene – afin de reduire le risqué de surchauffe et la
possibilite d’endommagement a d’autres materiels, ne pas installer pour commader une prise, un appareil a
moteur, une lampe fluorescente ou un appareil alimente par un transformateur.
Le présent appareil est conforme à l’article 15C des règlements de la FCC et CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Cet appareil a été testé et s’avère conforme aux restrictions relatives aux équipements numériques de classe B,
d’après l’article 15 des règlements du Conseil supérieur de l’audiovisuel américain (FCC). Ces restrictions ont
été instaurées pour offrir une protection raisonnable contre les interférences nuisibles au sein d’une installation
résidentielle. Cet appareil génère, utilise et peut émettre des fréquences radio et s’il n’est pas installé selon les
instructions, peut nuire aux radiocommunications. Toutefois, rien ne garantit que des parasites ne surviendront
pas dans une installation particulière. Si cet appareil cause des interférences nuisibles à la réception du
téléviseur ou de la radio, ce que vous pouvez déterminer en ouvrant et en fermant votre appareil, nous vous
invitons à essayer l’une des mesures correctives suivantes : • Réorientez l’antenne de réception installée sur
l’appareil qui manifeste les parasites.
• Éloignez l’appareil du composant qui reçoit les ondes. • Branchez l’appareil dans une prise de courant CA
différente de celle du composant qui reçoit les ondes. • Au besoin, consultez votre marchand électronique ou un
technicien spécialisé dans le service des radios/téléviseurs pour des suggestions supplémentaires.
25
Product Warranty
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date
of purchase, this product will be free from defects in material and workmanship and will perform in substantial
conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or
errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the
product does not perform as warranted above during the warranty period, Seller will either repair it, replace it,
or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid,
with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund
that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or
replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to
receive an RMA# and send the product, along with all other required materials to:
INSTEON
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or
implied, including any warranty or merchantability or fitness for a particular purpose. Any implied warranty,
including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed
or supplanted as provided above shall be limited to the two-year of the express warranty above. No other
representation or claim of any nature by any person shall be binding upon Seller or modify the terms of the
above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical
tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as
a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from
possession or use of this device, including without limitation damage to property and, to the extent permitted by
law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states
do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in
which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights
that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
© Copyright 2013 INSTEON
Rev 03.24.14
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement